예제 #1
0
파일: mainwindow.cpp 프로젝트: KDE/kdiagram
void MainWindow::on_paintValuesCB_toggled( bool checked )
{
    const int colCount = m_lines->model()->columnCount();
    for ( int iColumn = 0; iColumn<colCount; ++iColumn ) {
        DataValueAttributes a = m_lines->dataValueAttributes( iColumn );
        a.setVisible( true );

        TextAttributes ta = a.textAttributes();
        ta.setRotation( 0 );
        ta.setFont( QFont( "Comic", 10 ) );
        ta.setPen( m_lines->brush( iColumn ).color() );
        ta.setVisible( checked );

        a.setTextAttributes( ta );
        m_lines->setDataValueAttributes( iColumn, a);
    }
}
예제 #2
0
MainWindow::MainWindow( QWidget *parent )
    : QWidget( parent )
    , m_chart( new Chart() )
    , m_diagram( m_chart )
{
    setupUi( this );

    m_HLCModel.loadFromCSV( ":/HLC" );
    m_OHLCModel.loadFromCSV( ":/OHLC" );

    m_diagram.setType( StockDiagram::HighLowClose );
    m_diagram.setModel( &m_HLCModel );
    m_chart->coordinatePlane()->replaceDiagram( &m_diagram );
    KDChart::Legend* legend  = new KDChart::Legend( &m_diagram, m_chart );
    m_chart->addLegend( legend );

    QHBoxLayout* chartLayout = new QHBoxLayout( chartFrame );
    chartLayout->addWidget( m_chart );

    // Abscissa
    CartesianAxis *leftAxis = new CartesianAxis( &m_diagram );
    // Ordinate
    CartesianAxis *bottomAxis = new CartesianAxis( &m_diagram );

    leftAxis->setPosition( CartesianAxis::Left );

    TextAttributes attributes = bottomAxis->textAttributes();
    attributes.setRotation( 90 );
    attributes.setFontSize( Measure( 7.0, KDChartEnums::MeasureCalculationModeAbsolute ) );
    bottomAxis->setTextAttributes( attributes );
    bottomAxis->setPosition( CartesianAxis::Bottom );
    m_diagram.addAxis( leftAxis );
    m_diagram.addAxis( bottomAxis );
    m_diagram.addAxis( bottomAxis );
    applyColor( QColor( "chartreuse" ) );
    const bool connected = connect( colorChooser, SIGNAL( clicked() ), SLOT( chooseColor() ) );
    Q_ASSERT( connected );
    Q_UNUSED( connected );

    // Initialize all values for the stock chart to sane defaults
    initValues();
}
예제 #3
0
MainWindow::MainWindow( QWidget* parent ) :
    QWidget( parent )
{
    setupUi( this );

    QHBoxLayout* chartLayout = new QHBoxLayout( chartFrame );
    m_chart = new Chart();
    m_chart->setGlobalLeading( 10,  10,  10,  10 );
    chartLayout->addWidget( m_chart );
    hSBar->setVisible( false );
    vSBar->setVisible( false );

    m_model.loadFromCSV( ":/data" );

    // Set up the diagram
    m_lines = new BarDiagram();
    m_lines->setModel( &m_model );

    // create and position axis
    CartesianAxis *topAxis = new CartesianAxis( m_lines );
    CartesianAxis *leftAxis = new CartesianAxis ( m_lines );
    RulerAttributes rulerAttr = topAxis->rulerAttributes();
    rulerAttr.setTickMarkPen( 0.9999999, QPen( Qt::red ) );
    rulerAttr.setTickMarkPen( 2.0, QPen( Qt::green ) );
    rulerAttr.setTickMarkPen( 3.0, QPen( Qt::blue ) );
    rulerAttr.setShowMinorTickMarks(true);
    //rulerAttr.setShowMajorTickMarks(false);
    topAxis->setRulerAttributes( rulerAttr );
    CartesianAxis *rightAxis = new CartesianAxis ( m_lines );
    CartesianAxis *bottomAxis = new CartesianAxis ( m_lines );
    topAxis->setPosition ( CartesianAxis::Top );
    leftAxis->setPosition ( CartesianAxis::Left );
    rightAxis->setPosition ( CartesianAxis::Right );
    bottomAxis->setPosition ( CartesianAxis::Bottom );

// set the margin that should be used between the displayed labels and the ticks to zero
#if 0
    RulerAttributes ra = bottomAxis->rulerAttributes();
    ra.setLabelMargin(0);
    bottomAxis->setRulerAttributes( ra );
#endif

// show a red frame around the bottom axis
#if 0
    FrameAttributes fa( bottomAxis->frameAttributes() );
    fa.setPen( QPen(QBrush(QColor("#ff0000")),1.0) );
    fa.setVisible( true );
    bottomAxis->setFrameAttributes( fa );
#endif
    
    // set axis titles
    topAxis->setTitleText ( "Abscissa color configured top position" );
    leftAxis->setTitleText ( "left Ordinate: fonts configured" );
    rightAxis->setTitleText ( "right Ordinate: default settings" );
    bottomAxis->setTitleText ( "Abscissa Bottom" );
    topAxis->setTitleSize(1.1);
    topAxis->setTitleSpace(.4);

    // configure titles text attributes
    TextAttributes taTop ( topAxis->titleTextAttributes () );
    taTop.setPen( QPen( Qt::red ) );
    topAxis->setTitleTextAttributes ( taTop );

    TextAttributes taLeft ( leftAxis->titleTextAttributes () );
    taLeft.setRotation( 180 );
    Measure me( taLeft.fontSize() );
    me.setValue( me.value() * 0.8 );
    taLeft.setFontSize( me );

// Set the following to 1, to hide the left axis title
//  - no matter if a title text is set or not
#if 0
    taLeft.setVisible( false );
#endif
    leftAxis->setTitleTextAttributes ( taLeft );

    TextAttributes taBottom ( bottomAxis->titleTextAttributes () );
    taBottom.setPen(  QPen( Qt::blue ) );
    bottomAxis->setTitleTextAttributes ( taBottom );

    // configure labels text attributes
    TextAttributes taLabels( topAxis->textAttributes() );
    taLabels.setPen(  QPen( Qt::darkGreen ) );
    taLabels.setRotation( 90 );
    topAxis->setTextAttributes( taLabels );
    leftAxis->setTextAttributes( taLabels );
    bottomAxis->setTextAttributes( taLabels );


// Set the following to 0, to see the default Abscissa labels
// (== X headers, as read from the data file)
#if 1
    // configure labels and their shortened versions
    QStringList daysOfWeek;
    daysOfWeek << "M O N D A Y" << "Tuesday" << "Wednesday"
               << "Thursday" << "Friday" ;
    topAxis->setLabels( daysOfWeek );

    QStringList shortDays;
    shortDays << "MON" << "Tue" << "Wed"
              << "Thu" << "Fri";
    topAxis->setShortLabels( shortDays );

    QStringList bottomLabels;
    bottomLabels << "Team A" << "Team B" << "Team C";
    bottomAxis->setLabels( bottomLabels );

    QStringList shortBottomLabels;
    shortBottomLabels << "A" << "B";
    bottomAxis->setShortLabels( shortBottomLabels );
#endif

    // add axis
    m_lines->addAxis( topAxis );
    m_lines->addAxis( leftAxis );
    m_lines->addAxis( rightAxis );
    m_lines->addAxis( bottomAxis );

    // assign diagram to chart view
    m_chart->coordinatePlane()->replaceDiagram( m_lines );
}
예제 #4
0
void AbstractDiagram::Private::addLabel(
    LabelPaintCache* cache,
    const QModelIndex& index,
    const CartesianDiagramDataCompressor::CachePosition* position,
    const PositionPoints& points,
    const Position& autoPositionPositive, const Position& autoPositionNegative,
    const qreal value, qreal favoriteAngle /* = 0.0 */ )
{
    CartesianDiagramDataCompressor::AggregatedDataValueAttributes allAttrs(
        aggregatedAttrs( index, position ) );

    QMap<QModelIndex, DataValueAttributes>::const_iterator it;
    for ( it = allAttrs.constBegin(); it != allAttrs.constEnd(); ++it ) {
        DataValueAttributes dva = it.value();
        if ( !dva.isVisible() ) {
            continue;
        }

        const bool isPositive = ( value >= 0.0 );

        RelativePosition relPos( dva.position( isPositive ) );
        relPos.setReferencePoints( points );
        if ( relPos.referencePosition().isUnknown() ) {
            relPos.setReferencePosition( isPositive ? autoPositionPositive : autoPositionNegative );
        }

        // Rotate the label position (not the label itself) if the diagram is rotated so that the defaults still work
        if ( isTransposed() ) {
            KChartEnums::PositionValue posValue = relPos.referencePosition().value();
            if ( posValue >= KChartEnums::PositionNorthWest && posValue <= KChartEnums::PositionWest ) {
                // rotate 90 degrees clockwise
                posValue = static_cast< KChartEnums::PositionValue >( posValue + 2 );
                if ( posValue > KChartEnums::PositionWest ) {
                    // wraparound
                    posValue = static_cast< KChartEnums::PositionValue >( posValue -
                                ( KChartEnums::PositionWest - KChartEnums::PositionNorthWest ) );
                }
                relPos.setReferencePosition( Position( posValue ) );
            }
        }

        const QPointF referencePoint = relPos.referencePoint();
        if ( !diagram->coordinatePlane()->isVisiblePoint( referencePoint ) ) {
            continue;
        }

        const qreal fontHeight = cachedFontMetrics( dva.textAttributes().
                calculatedFont( plane, KChartEnums::MeasureOrientationMinimum ), diagram )->height();

        // Note: When printing data value texts and padding's Measure is using automatic reference area
        //       detection, the font height is used as reference size for both horizontal and vertical
        //       padding.
        QSizeF relativeMeasureSize( fontHeight, fontHeight );

        if ( !dva.textAttributes().hasRotation() ) {
            TextAttributes ta = dva.textAttributes();
            ta.setRotation( favoriteAngle );
            dva.setTextAttributes( ta );
        }

        // get the size of the label text using a subset of the information going into the final layout
        const QString text = formatDataValueText( dva, index, value );
        QTextDocument doc;
        doc.setDocumentMargin( 0 );
        if ( Qt::mightBeRichText( text ) ) {
            doc.setHtml( text );
        } else {
            doc.setPlainText( text );
        }
        const QFont calculatedFont( dva.textAttributes()
                                    .calculatedFont( plane, KChartEnums::MeasureOrientationMinimum ) );
        doc.setDefaultFont( calculatedFont );

        const QRectF plainRect = doc.documentLayout()->frameBoundingRect( doc.rootFrame() );

        /**
        * A few hints on how the positioning of the text frame is done:
        *
        * Let's assume we have a bar chart, a text for a positive value
        * to be drawn, and "North" as attrs.positivePosition().
        *
        * The reference point (pos) is then set to the top center point
        * of a bar. The offset now depends on the alignment:
        *
        *    Top: text is centered horizontally to the bar, bottom of
        *         text frame starts at top of bar
        *
        *    Bottom: text is centered horizontally to the bar, top of
        *            text frame starts at top of bar
        *
        *    Center: text is centered horizontally to the bar, center
        *            line of text frame is same as top of bar
        *
        *    TopLeft: right edge of text frame is horizontal center of
        *             bar, bottom of text frame is top of bar.
        *
        *    ...
        *
        * Positive and negative value labels are treated equally, "North"
        * also refers to the top of a negative bar, and *not* to the bottom.
        *
        *
        * "NorthEast" likewise refers to the top right edge of the bar,
        * "NorthWest" to the top left edge of the bar, and so on.
        *
        * In other words, attrs.positivePosition() always refers to a
        * position of the *bar*, and relPos.alignment() always refers
        * to an alignment of the text frame relative to this position.
        */

        QTransform transform;
        {
            // move to the general area where the label should be
            QPointF calcPoint = relPos.calculatedPoint( relativeMeasureSize );
            transform.translate( calcPoint.x(), calcPoint.y() );
            // align the text rect; find out by how many half-widths / half-heights to move.
            int dx = -1;
            if ( relPos.alignment() & Qt::AlignLeft ) {
                dx -= 1;
            } else if ( relPos.alignment() & Qt::AlignRight ) {
                 dx += 1;
            }

            int dy = -1;
            if ( relPos.alignment() & Qt::AlignTop ) {
                dy -= 1;
            } else if ( relPos.alignment() & Qt::AlignBottom ) {
                dy += 1;
            }
            transform.translate( qreal( dx ) * plainRect.width() * 0.5,
                                 qreal( dy ) * plainRect.height() * 0.5 );

            // rotate the text rect around its center
            transform.translate( plainRect.center().x(), plainRect.center().y() );
            int rotation = dva.textAttributes().rotation();
            if ( !isPositive && dva.mirrorNegativeValueTextRotation() ) {
                rotation *= -1;
            }
            transform.rotate( rotation );
            transform.translate( -plainRect.center().x(), -plainRect.center().y() );
        }

        QPainterPath labelArea;
        //labelArea.addPolygon( transform.mapToPolygon( plainRect.toRect() ) );
        //labelArea.closeSubpath();
        // Not doing that because QTransform has a special case for 180° that gives a different than
        // usual ordering of the points in the polygon returned by mapToPolygon( const QRect & ).
        // We expect a particular ordering in paintDataValueTextsAndMarkers() by using elementAt( 0 ),
        // and similar things might happen elsewhere.
        labelArea.addPolygon( transform.map( QPolygon( plainRect.toRect(), true ) ) );

        // store the label geometry and auxiliary data
        cache->paintReplay.append( LabelPaintInfo( it.key(), dva, labelArea,
                                                   referencePoint, value >= 0.0, text ) );
    }
}