예제 #1
0
파일: XML.cpp 프로젝트: Blumfield/TBCPvP
/** True if the next token begins the close tag */
static bool atClose(TextInput& t, const std::string name) {
    if ((t.peek().type() == Token::SYMBOL) && (t.peek().string() == "<")) {
        // Need to keep looking ahead
        Token p0 = t.read();
        if ((t.peek().type() == Token::SYMBOL) && (t.peek().string() == "/")) {
            // Check the name on the close tag.  It *must* match if
            // this is a well-formed document, but there might be a
            // tag error.
            Token p1 = t.read();
            Token p2 = t.peek();
            std::string s = p2.string();
            debugAssertM(beginsWith(name, s), "Mismatched close tag");

            // Put the tokens back
            t.push(p1);
            t.push(p0);
            return true;
        } else {
            // Put the read token back
            t.push(p0);
            return false;
        }
    } else {
        return false;
    }
}
예제 #2
0
파일: Any.cpp 프로젝트: lev1976g/easywow
	void Any::deserialize(TextInput& ti) {
		beforeRead();
		Token token = ti.read();
		deserialize(ti, token);
		// Restore the last token
		ti.push(token);
	}
예제 #3
0
GLenum Shader::ShaderProgram::getDeclarationType(TextInput& ti, bool& uniform) {
    uniform = false;
    if (ti.peek().type() == Token::SYMBOL) {
        bool readyForType = false;
        String s = ti.peek().string();
        //Parse all qualifiers before the type: 
        while (! readyForType) {
            if (isQualifier(s)) {
                uniform = (uniform || (s == "uniform"));
                ti.readSymbol(s);
                s = ti.peek().string();
            } else if (s == "layout") {
                //This should properly parse through all possible layout inputs
                //http://www.opengl.org/registry/doc/GLSLangSpec.4.30.6.pdf (pg52)
                ti.readSymbol(s);
                ti.readSymbol("(");
                Token t = ti.read();
                while ((t.type() != Token::SYMBOL) || (t.string() != ")")) {
                    t = ti.read();  
                }
                s = ti.peek().string();
            } else {
                // The next token is not a qualifier of any sort, so it is probably the type, if this is a declaration
                readyForType = true;
            }
        }

        // Read the type
        String variableSymbol = ti.readSymbol();

        // check for unsigned int, short, long long, etc
        if (variableSymbol == "unsigned") {
            while (toGLType(variableSymbol + " " + ti.peek().string()) != GL_NONE) {
                variableSymbol += " " + ti.readSymbol();
            }
        }
        // If the variableSymbol is not a valid type, then this is not a variable declaration, and GL_NONE will be returned
        // Checking for not being a declaration cannot be done earlier, as a declaration could have no qualifiers
        return toGLType(variableSymbol);
    } else {
        return GL_NONE;
    }
}
예제 #4
0
파일: Any.cpp 프로젝트: lev1976g/easywow
	void Any::deserializeComment(TextInput& ti, Token& token, std::string& comment) {
		// Parse comments
		while (token.type() == Token::COMMENT) {
			comment += trimWhitespace(token.string()) + "\n";

			// Allow comments to contain newlines.
			do {
				token = ti.read();
				comment += "\n";
			} while (token.type() == Token::NEWLINE);
		}

		comment = trimWhitespace(comment);
	}
예제 #5
0
파일: Any.cpp 프로젝트: lev1976g/easywow
	void Any::readUntilCommaOrClose(TextInput& ti, Token& token) {
		while (!(((token.type() == Token::SYMBOL) &&
			(isClose(token.string()[0]))) ||
			isSeparator(token.string()[0]))) {
			switch (token.type()) {
			case Token::NEWLINE:
			case Token::COMMENT:
				// Consume
				token = ti.read();
				break;

			default:
				throw ParseError(ti.filename(), token.line(), token.character(),
					"Expected a comma or close paren");
			}
		}
	}
예제 #6
0
파일: Any.cpp 프로젝트: lev1976g/easywow
	void Any::deserializeBody(TextInput& ti, Token& token) {
		char closeSymbol = '}';
		m_type = TABLE;

		const char c = token.string()[0];

		if (c != '{') {
			m_type = ARRAY;
			// Chose the appropriate close symbol
			closeSymbol = (c == '(') ? ')' : ']';
		}

		// Allocate the underlying data structure
		ensureData();
		m_data->source.set(ti, token);

		// Consume the open token
		token = ti.read();

		while (!((token.type() == Token::SYMBOL) && (token.string()[0] == closeSymbol))) {
			// Read any leading comment.  This must be done here (and not in the recursive deserialize
			// call) in case the body contains only a comment.
			std::string comment;
			deserializeComment(ti, token, comment);

			if ((token.type() == Token::SYMBOL) && (token.string()[0] == closeSymbol)) {
				// We're done; this catches the case where the array is empty
				break;
			}

			// Pointer the value being read
			Any a;
			std::string key;

			if (m_type == TABLE) {
				// Read the key
				if (token.type() != Token::SYMBOL && token.type() != Token::STRING) {
					throw ParseError(ti.filename(), token.line(), token.character(), "Expected a name");
				}

				key = token.string();
				// Consume everything up to the = sign
				token = ti.readSignificant();

				if ((token.type() != Token::SYMBOL) || (token.string() != "=")) {
					throw ParseError(ti.filename(), token.line(), token.character(), "Expected =");
				}
				else {
					// Consume (don't consume comments--we want the value pointed to by a to get those).
					token = ti.read();
				}
			}
			a.deserialize(ti, token);

			if (!comment.empty()) {
				// Prepend the comment we read earlier
				a.ensureData();
				a.m_data->comment = trimWhitespace(comment + "\n" + a.m_data->comment);
			}

			if (m_type == TABLE) {
				set(key, a);
			}
			else {
				append(a);
			}

			// Read until the comma or close paren, discarding trailing comments and newlines
			readUntilCommaOrClose(ti, token);

			// Consume the comma
			if (isSeparator(token.string()[0])) {
				token = ti.read();
			}
		}

		// Consume the close paren (to match other deserialize methods)
		token = ti.read();
	}
예제 #7
0
파일: Any.cpp 프로젝트: lev1976g/easywow
	void Any::deserialize(TextInput& ti, Token& token) {
		// Deallocate old data
		dropReference();
		m_type = NONE;
		m_simpleValue.b = false;

		// Skip leading newlines
		while (token.type() == Token::NEWLINE) {
			token = ti.read();
		}

		std::string comment;
		if (token.type() == Token::COMMENT) {
			deserializeComment(ti, token, comment);
		}

		if (token.type() == Token::END) {
			// There should never be a comment without an Any following it; even
			// if the file ends with some commented out stuff,
			// that should not happen after a comma, so we'd never read that
			// far in a proper file.
			throw ParseError(ti.filename(), token.line(), token.character(),
				"File ended without a properly formed Any");
		}

		switch (token.type()) {
		case Token::STRING:
			m_type = STRING;
			ensureData();
			*(m_data->value.s) = token.string();
			m_data->source.set(ti, token);
			break;

		case Token::NUMBER:
			m_type = NUMBER;
			m_simpleValue.n = token.number();
			ensureData();
			m_data->source.set(ti, token);
			break;

		case Token::BOOLEAN:
			m_type = BOOLEAN;
			m_simpleValue.b = token.boolean();
			ensureData();
			m_data->source.set(ti, token);
			break;

		case Token::SYMBOL:
			// Named Array, Named Table, Array, Table, or NONE
			if (toUpper(token.string()) == "NONE") {
				// Nothing left to do; we initialized to NONE originally
				ensureData();
				m_data->source.set(ti, token);
			}
			else {
				// Array or Table

				// Parse the name

				// s must have at least one element or this would not have
				// been parsed as a symbol
				std::string name;
				deserializeName(ti, token, name);
				if (token.type() != Token::SYMBOL) {
					throw ParseError(ti.filename(), token.line(), token.character(),
						"Malformed Any TABLE or ARRAY; must start with [, (, or {");
				}

				if (isOpen(token.string()[0])) {
					// Array or table
					deserializeBody(ti, token);
				}
				else {
					throw ParseError(ti.filename(), token.line(), token.character(),
						"Malformed Any TABLE or ARRAY; must start with [, (, or {");
				}

				if (!name.empty()) {
					ensureData();
					m_data->name = name;
				}
			} // if NONE
			break;

		default:
			throw ParseError(ti.filename(), token.line(), token.character(),
				"Unexpected token");
		} // switch

		if (!comment.empty()) {
			ensureData();
			m_data->comment = comment;
		}

		if (m_type != ARRAY && m_type != TABLE) {
			// Array and table already consumed their last token
			token = ti.read();
		}
	}
예제 #8
0
파일: XML.cpp 프로젝트: Blumfield/TBCPvP
void XML::deserialize(TextInput& t) {
 begin:
    Token n = t.read();
    m_attribute.clear();
    m_child.clear();
    m_name = "";
    m_value = "";

    if ((n.type() == Token::SYMBOL) && (n.string() == "<")) {
        // Beginning a tag
        
        // Read name
        n = t.read();
        debugAssert(n.type() == Token::SYMBOL);
        bool isComment = 
            (n.string() == "!") && 
            (t.peek().type() == Token::SYMBOL) &&
            (t.peek().string() == "--");

        // ignored tag:        <?xml> or <!xml>
        // comment tag:        <!--   ... -->

        if ((n.string() == "?") || ((n.string() == "!") && ! isComment)) {
            // Ignore this tag
            while (t.hasMore() && ! ((n.type() == Token::SYMBOL) && (n.string() == ">"))) {
                n = t.read();
            }
            goto begin;
        } else if (isComment) {
            // Ignore until "-->"
            bool prevWasDash = false;
            while (t.hasMore() && ! ((n.type() == Token::SYMBOL) && (n.string() == ">") && prevWasDash)) {
                prevWasDash = (n.type() == Token::SYMBOL) && (n.string() == "--");
                n = t.read();
            }
            goto begin;
        }

        // Keep reading until no colon
        m_name += n.string();
        n = t.read();
        while ((n.type() == Token::SYMBOL) && (n.string() == ":")) {
            //  tag with namespace: <x:y>
            m_name += ":" + t.readSymbol();
            n = t.read();
        }
        
        // Read end of tag/close
        bool done = false;
        while (! done) {
            debugAssert(n.type() == Token::SYMBOL);
            if (n.string() == "/") {
                // empty-element tag:  <foo/>
                // Consume the close tag
                t.readSymbol(">");
                done = true;

            } else if (n.string() == ">") {
                // End of open tag: read children until close tag
                while (! atClose(t, m_name)) {
                    m_child.next().deserialize(t);
                }

                // Read close tag (we wouldn't be here unless it parses correctly)
                while (t.hasMore() && ! (t.readSymbol() == ">")) {}
                
                done = true;
            } else {
                // Attribute pair
                std::string k = n.string();
                t.readSymbol("=");
                std::string v = t.read().string();
                m_attribute.set(k, v);

                // Advance to next
                n = t.read();
            }
        }
    } else {
        // Beginning embedded content.  Read until the end of file or the next tag.
        m_type = VALUE;
        m_value += n.string();

        n = t.peek();
        while (t.hasMore() && ! ((n.type() == Token::SYMBOL) && (n.string() == "<"))) {
            m_value += " " + t.read().string();
            n = t.peek();
        }
    }
}