예제 #1
0
        void apply(osg::Geometry& geom)
        {
            geom.setUseDisplayList(false);

            if (!_manualVertexAliasing) return;

            osg::notify(osg::NOTICE)<<"Found geometry "<<&geom<<std::endl;
            if (geom.getVertexArray())
            {
                setVertexAttrib(geom, _vertexAlias, geom.getVertexArray(), false, osg::Array::BIND_PER_VERTEX);
                geom.setVertexArray(0);
            }

            if (geom.getNormalArray())
            {
                setVertexAttrib(geom, _normalAlias, geom.getNormalArray(), true);
                geom.setNormalArray(0);
            }

            if (geom.getColorArray())
            {
                setVertexAttrib(geom, _colorAlias, geom.getColorArray(), false);
                geom.setColorArray(0);
            }

            if (geom.getSecondaryColorArray())
            {
                setVertexAttrib(geom, _secondaryColorAlias, geom.getSecondaryColorArray(), false);
                geom.setSecondaryColorArray(0);
            }

            if (geom.getFogCoordArray())
            {
                // should we normalize the FogCoord array? Don't think so...
                setVertexAttrib(geom, _fogCoordAlias, geom.getFogCoordArray(), false);
                geom.setFogCoordArray(0);
            }

            unsigned int maxNumTexCoords = geom.getNumTexCoordArrays();
            if (maxNumTexCoords>8)
            {
                osg::notify(osg::NOTICE)<<"Warning: Ignoring "<<maxNumTexCoords-8<<" texture coordinate arrays, only 8 are currently supported in vertex attribute conversion code."<<std::endl;
                maxNumTexCoords = 8;
            }
            for(unsigned int i=0; i<maxNumTexCoords; ++i)
            {
                if (geom.getTexCoordArray(i))
                {
                    setVertexAttrib(geom, _texCoordAlias[i], geom.getTexCoordArray(i), false, osg::Array::BIND_PER_VERTEX);
                    geom.setTexCoordArray(i,0);
                }
                else
                {
                    osg::notify(osg::NOTICE)<<"Found empty TexCoordArray("<<i<<")"<<std::endl;
                }
            }
        }
예제 #2
0
파일: RigGeometry.cpp 프로젝트: yueying/osg
void RigGeometry::copyFrom(osg::Geometry& from)
{
    bool copyToSelf = (this==&from);

    osg::Geometry& target = *this;

    if (!copyToSelf) target.setStateSet(from.getStateSet());

    // copy over primitive sets.
    if (!copyToSelf) target.getPrimitiveSetList() = from.getPrimitiveSetList();

    if (from.getVertexArray())
    {
        if (!copyToSelf) target.setVertexArray(from.getVertexArray());
    }

    if (from.getNormalArray())
    {
        if (!copyToSelf) target.setNormalArray(from.getNormalArray());
    }

    if (from.getColorArray())
    {
        if (!copyToSelf) target.setColorArray(from.getColorArray());
    }

    if (from.getSecondaryColorArray())
    {
        if (!copyToSelf) target.setSecondaryColorArray(from.getSecondaryColorArray());
    }

    if (from.getFogCoordArray())
    {
        if (!copyToSelf) target.setFogCoordArray(from.getFogCoordArray());
    }

    for(unsigned int ti=0;ti<from.getNumTexCoordArrays();++ti)
    {
        if (from.getTexCoordArray(ti))
        {
            if (!copyToSelf) target.setTexCoordArray(ti,from.getTexCoordArray(ti));
        }
    }

    osg::Geometry::ArrayList& arrayList = from.getVertexAttribArrayList();
    for(unsigned int vi=0;vi< arrayList.size();++vi)
    {
        osg::Array* array = arrayList[vi].get();
        if (array)
        {
            if (!copyToSelf) target.setVertexAttribArray(vi,array);
        }
    }
}
 void apply(osg::Geometry& geom) {
     osg::Vec3Array* array = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
     if (array) {
         for (unsigned int i = 0; i < array->size(); i++) {
             double x,y,z;
             double lng = (*array)[i][0];
             double lat = (*array)[i][1];
             _coordinates->convertLatLongHeightToXYZ(osg::DegreesToRadians(lat), osg::DegreesToRadians(lng), 0, x, y, z);
             (*array)[i] = osg::Vec3(x,y,z);
         }
     }
 }
예제 #4
0
 VertexAttribComparitor(osg::Geometry& geometry)
 {
     add(geometry.getVertexArray());
     add(geometry.getNormalArray());
     add(geometry.getColorArray());
     add(geometry.getSecondaryColorArray());
     add(geometry.getFogCoordArray());
     unsigned int i;
     for(i=0;i<geometry.getNumTexCoordArrays();++i)
     {
         add(geometry.getTexCoordArray(i));
     }
     for(i=0;i<geometry.getNumVertexAttribArrays();++i)
     {
         add(geometry.getVertexAttribArray(i));
     }
 }
예제 #5
0
void osgToy::FacetingVisitor::facet( osg::Geometry& geom )
{
    // count #surfaces, exit if none
    osg::Geometry::PrimitiveSetList& primitives = geom.getPrimitiveSetList();
    osg::Geometry::PrimitiveSetList::iterator itr;
    unsigned int numSurfacePrimitives=0;
    for(itr=primitives.begin();
        itr!=primitives.end();
        ++itr)
    {
        switch((*itr)->getMode())
        {
            case osg::PrimitiveSet::TRIANGLES:
            case osg::PrimitiveSet::TRIANGLE_STRIP:
            case osg::PrimitiveSet::TRIANGLE_FAN:
            case osg::PrimitiveSet::QUADS:
            case osg::PrimitiveSet::QUAD_STRIP:
            case osg::PrimitiveSet::POLYGON:
                ++numSurfacePrimitives;
                break;

            default:
                break;
        }
    }
    if (!numSurfacePrimitives) return;

    // exit if no vertices
    osg::Vec3Array *coords = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
    if (!coords || !coords->size()) return;
    
    // generate the normals
    osg::Vec3Array *normals = new osg::Vec3Array(coords->size());
    osg::TriangleIndexFunctor<FacetingOperator> ftif;
    ftif.set( coords, normals );
    geom.accept(ftif);

    geom.setNormalArray( normals );
    geom.setNormalIndices( geom.getVertexIndices() );
    geom.setNormalBinding(osg::Geometry::BIND_PER_VERTEX);
    geom.dirtyDisplayList();
}
예제 #6
0
bool
Tessellator::tessellateGeometry(osg::Geometry &geom)
{
    osg::Vec3Array* vertices = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());

    if (!vertices || vertices->empty() || geom.getPrimitiveSetList().empty()) return false;

    // copy the original primitive set list
    osg::Geometry::PrimitiveSetList originalPrimitives = geom.getPrimitiveSetList();

    // clear the primitive sets
    unsigned int nprimsetoriginal= geom.getNumPrimitiveSets();
    if (nprimsetoriginal) geom.removePrimitiveSet(0, nprimsetoriginal);

    bool success = true;
    for (unsigned int i=0; i < originalPrimitives.size(); i++)
    {
        osg::ref_ptr<osg::PrimitiveSet> primitive = originalPrimitives[i].get();

        if (primitive->getMode()==osg::PrimitiveSet::POLYGON || primitive->getMode()==osg::PrimitiveSet::LINE_LOOP)
        {
            if (primitive->getType()==osg::PrimitiveSet::DrawArrayLengthsPrimitiveType)
            {
                osg::DrawArrayLengths* drawArrayLengths = static_cast<osg::DrawArrayLengths*>(primitive.get());
                unsigned int first = drawArrayLengths->getFirst();
                for(osg::DrawArrayLengths::iterator itr=drawArrayLengths->begin();
                    itr!=drawArrayLengths->end();
                    ++itr)
                {
                    unsigned int last = first + *itr;
                    osg::PrimitiveSet* newPrimitive = tessellatePrimitive(first, last, vertices);
                    if (newPrimitive)
                    {
                        geom.addPrimitiveSet(newPrimitive);
                    }
                    else
                    {
                        // tessellation failed, add old primitive set back
                        geom.addPrimitiveSet(primitive);
                        success = false;
                    }

                    first = last;
                }
            }
            else
            {
                if (primitive->getNumIndices()>=3)
                {
                    osg::PrimitiveSet* newPrimitive = tessellatePrimitive(primitive.get(), vertices);
                    if (newPrimitive)
                    {
                        geom.addPrimitiveSet(newPrimitive);
                    }
                    else
                    {
                        // tessellation failed, add old primitive set back
                        geom.addPrimitiveSet(primitive);
                        success = false;
                    }
                }
            }
        }
        else
        {
            //
            // TODO: handle more primitive modes
            //
        }
    }

    return success;
}
void
FltExportVisitor::writeLocalVertexPool( const osg::Geometry& geom )
{
    // Attribute Mask
    static const unsigned int HAS_POSITION      = 0x80000000u >> 0;
    // static const unsigned int HAS_COLOR_INDEX   = 0x80000000u >> 1;
    static const unsigned int HAS_RGBA_COLOR    = 0x80000000u >> 2;
    static const unsigned int HAS_NORMAL        = 0x80000000u >> 3;
    static const unsigned int HAS_BASE_UV       = 0x80000000u >> 4;
    static const unsigned int HAS_UV_LAYER1     = 0x80000000u >> 5;
    static const unsigned int HAS_UV_LAYER2     = 0x80000000u >> 6;
    static const unsigned int HAS_UV_LAYER3     = 0x80000000u >> 7;
    static const unsigned int HAS_UV_LAYER4     = 0x80000000u >> 8;
    static const unsigned int HAS_UV_LAYER5     = 0x80000000u >> 9;
    static const unsigned int HAS_UV_LAYER6     = 0x80000000u >> 10;
    static const unsigned int HAS_UV_LAYER7     = 0x80000000u >> 11;

    const osg::Array* v = geom.getVertexArray();
    uint32 numVerts( v->getNumElements() );
    osg::ref_ptr< const osg::Vec3dArray > v3 = VertexPaletteManager::asVec3dArray( v, numVerts );
    if (!v3)
    {
        std::string warning( "fltexp: writeLocalVertexPool: VertexArray is not Vec3Array." );
        osg::notify( osg::WARN ) << warning << std::endl;
        _fltOpt->getWriteResult().warn( warning );
        return;
    }

    // Compute attribute bits and vertex size.
    const osg::Array* c = geom.getColorArray();
    const osg::Array* n = geom.getNormalArray();
    const osg::Array* t = geom.getTexCoordArray( 0 );

    osg::ref_ptr< const osg::Vec4Array > c4 = VertexPaletteManager::asVec4Array( c, numVerts );
    osg::ref_ptr< const osg::Vec3Array > n3 = VertexPaletteManager::asVec3Array( n, numVerts );
    osg::ref_ptr< const osg::Vec2Array > t2 = VertexPaletteManager::asVec2Array( t, numVerts );
    if (c && !c4)
        return;
    if (n && !n3)
        return;
    if (t && !t2)
        return;

    std::vector< osg::ref_ptr< const osg::Vec2Array > > mtc;
    mtc.resize( 8 );
    int unit=1;
    for( ;unit<8; unit++)
        mtc[ unit ] = VertexPaletteManager::asVec2Array( geom.getTexCoordArray( unit ), numVerts );

    uint32 attr( HAS_POSITION );
    unsigned int vertSize( sizeof( float64 ) * 3 );

    if ( ( c4 != NULL ) && ( geom.getColorBinding() == osg::Geometry::BIND_PER_VERTEX) )
    {
        attr |= HAS_RGBA_COLOR;
        vertSize += sizeof( unsigned int );
    }
    if ( ( n3 != NULL ) && ( geom.getNormalBinding() == osg::Geometry::BIND_PER_VERTEX) )
    {
        attr |= HAS_NORMAL;
        vertSize += ( sizeof( float32 ) * 3 );
    }
    if ( t2 != NULL )
    {
        attr |= HAS_BASE_UV;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    // Add multitex
    if (isTextured( 1, geom ))
    {
        attr |= HAS_UV_LAYER1;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    if (isTextured( 2, geom ))
    {
        attr |= HAS_UV_LAYER2;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    if (isTextured( 3, geom ))
    {
        attr |= HAS_UV_LAYER3;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    if (isTextured( 4, geom ))
    {
        attr |= HAS_UV_LAYER4;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    if (isTextured( 5, geom ))
    {
        attr |= HAS_UV_LAYER5;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    if (isTextured( 6, geom ))
    {
        attr |= HAS_UV_LAYER6;
        vertSize += ( sizeof( float32 ) * 2 );
    }
    if (isTextured( 7, geom ))
    {
        attr |= HAS_UV_LAYER7;
        vertSize += ( sizeof( float32 ) * 2 );
    }

    unsigned int maxVerts = (0xffff - 12) / vertSize;
    unsigned int thisVertCount = (maxVerts > numVerts) ? numVerts : maxVerts;
    unsigned int currentIndexLimit = maxVerts;
    uint16 length( 12 + (vertSize * thisVertCount) );


    _records->writeInt16( (int16) LOCAL_VERTEX_POOL_OP );
    _records->writeUInt16( length );
    _records->writeUInt32( numVerts ); // number of vertices
    _records->writeUInt32( attr ); // attribute bits

    unsigned int idx;
    for( idx=0; idx<numVerts; idx++ )
    {
        _records->writeVec3d( (*v3)[ idx ] );

        if (attr & HAS_RGBA_COLOR)
        {
            osg::Vec4 color = (*c4)[ idx ];
            unsigned int packedColor = (int)(color[3]*255) << 24 |
                (int)(color[2]*255) << 16 | (int)(color[1]*255) << 8 |
                (int)(color[0]*255);
            _records->writeUInt32( packedColor );
        }

        if (attr & HAS_NORMAL)
            _records->writeVec3f( (*n3)[ idx ] );

        if (attr & HAS_BASE_UV)
            _records->writeVec2f( (*t2)[ idx ] );

        if (attr & HAS_UV_LAYER1)
            _records->writeVec2f( (*mtc[1])[ idx ] );
        if (attr & HAS_UV_LAYER2)
            _records->writeVec2f( (*mtc[2])[ idx ] );
        if (attr & HAS_UV_LAYER3)
            _records->writeVec2f( (*mtc[3])[ idx ] );
        if (attr & HAS_UV_LAYER4)
            _records->writeVec2f( (*mtc[4])[ idx ] );
        if (attr & HAS_UV_LAYER5)
            _records->writeVec2f( (*mtc[5])[ idx ] );
        if (attr & HAS_UV_LAYER6)
            _records->writeVec2f( (*mtc[6])[ idx ] );
        if (attr & HAS_UV_LAYER7)
            _records->writeVec2f( (*mtc[7])[ idx ] );


        // Handle continuation record if necessary.
        if ( (idx+1 == currentIndexLimit) && (idx+1 < numVerts) )
        {
            currentIndexLimit += maxVerts;
            unsigned int remaining( numVerts - (idx+1) );
            thisVertCount = (maxVerts > remaining) ? remaining : maxVerts;
            writeContinuationRecord( (vertSize * thisVertCount) );
        }
    }
}
예제 #8
0
void
GeometryValidator::apply(osg::Geometry& geom)
{
    if ( geom.getVertexArray() == 0L )
    {
        OE_NOTICE << LC << "NULL vertex array!!\n";
        return;
    }

    unsigned numVerts = geom.getVertexArray()->getNumElements();
    if ( numVerts == 0 )
    {
        OE_NOTICE << LC << "No verts!! name=" << geom.getName() << "\n";
        return;
    }

    std::set<osg::BufferObject*> _vbos;

    osg::Geometry::ArrayList arrays;
    geom.getArrayList(arrays);

    for(unsigned i=0; i<arrays.size(); ++i)
    {
        osg::Array* a = arrays[i].get();
        if ( a )
        {
            if ( a->getBinding() == a->BIND_OVERALL && a->getNumElements() != 1 )
            {
                OE_NOTICE << LC << "Found an array with BIND_OVERALL and size <> 1\n";
            }
            else if ( a->getBinding() == a->BIND_PER_VERTEX && a->getNumElements() != numVerts )
            {
                OE_NOTICE << LC << "Found BIND_PER_VERTEX with wrong number of elements (expecting " << numVerts << "; found " << a->getNumElements() << ")\n";
            }

            _vbos.insert( a->getVertexBufferObject() );
        }
        else
        {
            OE_NOTICE << LC << "Found a NULL array\n";
        }

    }

    if ( _vbos.size() != 1 )
    {
        OE_NOTICE << LC << "Found a Geometry that uses more than one VBO (non-optimal sharing)\n";
    }

    const osg::Geometry::PrimitiveSetList& plist = geom.getPrimitiveSetList();
    
    std::set<osg::BufferObject*> _ebos;

    for( osg::Geometry::PrimitiveSetList::const_iterator p = plist.begin(); p != plist.end(); ++p )
    {
        osg::PrimitiveSet* pset = p->get();

        osg::DrawArrays* da = dynamic_cast<osg::DrawArrays*>(pset);
        if ( da )
        {
            if ( da->getFirst() >= numVerts )
            {
                OE_NOTICE << LC << "DrawArrays: first > numVerts\n";
            }
            if ( da->getFirst()+da->getCount() > numVerts )
            {
                OE_NOTICE << LC << "DrawArrays: first/count out of bounds\n";
            }
            if ( da->getCount() < 1 )
            {
                OE_NOTICE << LC << "DrawArrays: count is zero\n";
            }
        }

        bool isDe = pset->getDrawElements() != 0L;

        osg::DrawElementsUByte* de_byte = dynamic_cast<osg::DrawElementsUByte*>(pset);
        if ( de_byte )
        {
            validateDE(de_byte, 0xFF, numVerts );
            _ebos.insert( de_byte->getElementBufferObject() );
        }

        osg::DrawElementsUShort* de_short = dynamic_cast<osg::DrawElementsUShort*>(pset);
        if ( de_short )
        {
            validateDE(de_short, 0xFFFF, numVerts );
            _ebos.insert( de_short->getElementBufferObject() );
        }

        osg::DrawElementsUInt* de_int = dynamic_cast<osg::DrawElementsUInt*>(pset);
        if ( de_int )
        {
            validateDE(de_int, 0xFFFFFFFF, numVerts );
            _ebos.insert( de_int->getElementBufferObject() );
        }

        if ( pset->getNumIndices() == 0 )
        {
            OE_NOTICE << LC << "Primset: num elements = 0; class=" << pset->className() << ", name=" << pset->getName() << "\n";
        }
        else if ( pset->getType() >= GL_TRIANGLES && pset->getNumIndices() < 3 )
        {
            OE_NOTICE << LC << "Primset: not enough indicies for surface prim type\n";
        }
        else if ( pset->getType() >= GL_LINE_STRIP && pset->getNumIndices() < 2 )
        {
            OE_NOTICE << LC << "Primset: not enough indicies for linear prim type\n";
        }
        else if ( isDe && pset->getType() == GL_LINES && pset->getNumIndices() % 2 != 0 )
        {
            OE_NOTICE << LC << "Primset: non-even index count for GL_LINES\n";
        }
    }

    if ( _ebos.size() != 1 )
    {
        OE_NOTICE << LC << "Found a Geometry that uses more than one EBO (non-optimal sharing)\n";
    }
}
예제 #9
0
void UnIndexMeshVisitor::apply(osg::Geometry& geom) 
{
    // no point optimizing if we don't have enough vertices.
    if (!geom.getVertexArray()) return;

    // check for the existence of surface primitives
    unsigned int numIndexedPrimitives = 0;
    osg::Geometry::PrimitiveSetList& primitives = geom.getPrimitiveSetList();
    osg::Geometry::PrimitiveSetList::iterator itr;
    for(itr=primitives.begin();
        itr!=primitives.end();
        ++itr)
    {
        osg::PrimitiveSet::Type type = (*itr)->getType();
        if ((type == osg::PrimitiveSet::DrawElementsUBytePrimitiveType
             || type == osg::PrimitiveSet::DrawElementsUShortPrimitiveType
             || type == osg::PrimitiveSet::DrawElementsUIntPrimitiveType))
            numIndexedPrimitives++;
    }
    
    // no polygons or no indexed primitive, nothing to do
    if (!numIndexedPrimitives) {
        return;
    }

    // we dont manage lines
    
    GeometryArrayList arraySrc(geom);
    GeometryArrayList arrayList = arraySrc.cloneType();

    osg::Geometry::PrimitiveSetList newPrimitives;

    for(itr=primitives.begin();
        itr!=primitives.end();
        ++itr)
    {
        osg::PrimitiveSet::Mode mode = (osg::PrimitiveSet::Mode)(*itr)->getMode();

        switch(mode) {

            // manage triangles
        case(osg::PrimitiveSet::TRIANGLES):
        case(osg::PrimitiveSet::TRIANGLE_STRIP):
        case(osg::PrimitiveSet::TRIANGLE_FAN):
        case(osg::PrimitiveSet::QUADS):
        case(osg::PrimitiveSet::QUAD_STRIP):
        case(osg::PrimitiveSet::POLYGON):
        {
            // for each geometry list indexes of vertexes
            // to makes triangles
            TriangleIndexor triangleIndexList;
            (*itr)->accept(triangleIndexList);

            unsigned int index = arrayList.size();

            // now copy each vertex to new array, like a draw array
            arraySrc.append(triangleIndexList._indices, arrayList);

            newPrimitives.push_back(new osg::DrawArrays(osg::PrimitiveSet::TRIANGLES,
                                                        index,
                                                        triangleIndexList._indices.size()));
        }
        break;

        // manage lines
        case(osg::PrimitiveSet::LINES):
        case(osg::PrimitiveSet::LINE_STRIP):
        case(osg::PrimitiveSet::LINE_LOOP):
        {
            EdgeIndexor edgesIndexList;
            (*itr)->accept(edgesIndexList);

            unsigned int index = arrayList.size();

            // now copy each vertex to new array, like a draw array
            arraySrc.append(edgesIndexList._indices, arrayList);

            newPrimitives.push_back(new osg::DrawArrays(osg::PrimitiveSet::LINES,
                                                        index,
                                                        edgesIndexList._indices.size()));
        }
        break;
        case(osg::PrimitiveSet::POINTS):
        {
            PointIndexor pointsIndexList;
            (*itr)->accept(pointsIndexList);

            unsigned int index = arrayList.size();

            // now copy each vertex to new array, like a draw array
            arraySrc.append(pointsIndexList._indices, arrayList);
            newPrimitives.push_back(new osg::DrawArrays(osg::PrimitiveSet::POINTS,
                                                        index,
                                                        pointsIndexList._indices.size()));
        }
        break;
        default:
            break;
        }
    }

    arrayList.setToGeometry(geom);
    geom.setPrimitiveSetList(newPrimitives);
}
예제 #10
0
void Tessellator::collectTessellation(osg::Geometry &geom, unsigned int originalIndex)
{
    osg::Vec3Array* vertices = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
    VertexPtrToIndexMap vertexPtrToIndexMap;
    
    // populate the VertexPtrToIndexMap.
    for(unsigned int vi=0;vi<vertices->size();++vi)
    {
        vertexPtrToIndexMap[&((*vertices)[vi])] = vi;
    }
    
    handleNewVertices(geom, vertexPtrToIndexMap);
    
    // we don't properly handle per primitive and per primitive_set bindings yet
    // will need to address this soon. Robert Oct 2002.
    {
        osg::Vec3Array* normals = NULL; // GWM Sep 2002 - add normals for extra facets
        int iprim=0;
        if (geom.getNormalBinding()==osg::Geometry::BIND_PER_PRIMITIVE ||
            geom.getNormalBinding()==osg::Geometry::BIND_PER_PRIMITIVE_SET)
        {
            normals = dynamic_cast<osg::Vec3Array*>(geom.getNormalArray()); // GWM Sep 2002
        }
        // GWM Dec 2003 - needed to add colours for extra facets
        osg::Vec4Array* cols4 = NULL; // GWM Dec 2003 colours are vec4
        osg::Vec3Array* cols3 = NULL; // GWM Dec 2003 colours are vec3
        if (geom.getColorBinding()==osg::Geometry::BIND_PER_PRIMITIVE ||
              geom.getColorBinding()==osg::Geometry::BIND_PER_PRIMITIVE_SET)
        {
              Array* colours = geom.getColorArray(); // GWM Dec 2003 - need to duplicate face colours
              switch (colours->getType()) {
              case osg::Array::Vec4ArrayType:
                  cols4=dynamic_cast<osg::Vec4Array *> (colours);
                  break;
              case osg::Array::Vec3ArrayType:
                  cols3=dynamic_cast<osg::Vec3Array *> (colours);
                  break;
              default:
                  break;
              }
              
        }
        // GWM Dec 2003 - these holders need to go outside the loop to 
        // retain the flat shaded colour &/or normal for each tessellated polygon
        osg::Vec3 norm(0.0f,0.0f,0.0f);
        osg::Vec4 primCol4(0.0f,0.0f,0.0f,1.0f);
        osg::Vec3 primCol3(0.0f,0.0f,0.0f);

        for(PrimList::iterator primItr=_primList.begin();
        primItr!=_primList.end();
        ++primItr, ++_index)
        {
              Prim* prim=primItr->get();
              int ntris=0;

              if(vertexPtrToIndexMap.size() <= 255)
              {
                  osg::DrawElementsUByte* elements = new osg::DrawElementsUByte(prim->_mode);
                  for(Prim::VecList::iterator vitr=prim->_vertices.begin();
                  vitr!=prim->_vertices.end();
                  ++vitr)
                {
                    elements->push_back(vertexPtrToIndexMap[*vitr]);
                }

                  // add to the drawn primitive list.
                  geom.addPrimitiveSet(elements);
                  ntris=elements->getNumIndices()/3;
              }
              else if(vertexPtrToIndexMap.size() > 255 && vertexPtrToIndexMap.size() <= 65535)
              {
                  osg::DrawElementsUShort* elements = new osg::DrawElementsUShort(prim->_mode);
                  for(Prim::VecList::iterator vitr=prim->_vertices.begin();
                    vitr!=prim->_vertices.end();
                    ++vitr)
                  {
                    elements->push_back(vertexPtrToIndexMap[*vitr]);
                  }

                  // add to the drawn primitive list.
                  geom.addPrimitiveSet(elements);
                  ntris=elements->getNumIndices()/3;
              }
              else
              {
                  osg::DrawElementsUInt* elements = new osg::DrawElementsUInt(prim->_mode);
                  for(Prim::VecList::iterator vitr=prim->_vertices.begin();
                    vitr!=prim->_vertices.end();
                    ++vitr)
                  {
                    elements->push_back(vertexPtrToIndexMap[*vitr]);
                  }

                  // add to the drawn primitive list.
                  geom.addPrimitiveSet(elements);
                  ntris=elements->getNumIndices()/3;
              }

              if (primItr==_primList.begin()) 
              {   // first primitive so collect primitive normal & colour.
                  if (normals) {
                     if (geom.getNormalBinding()==osg::Geometry::BIND_PER_PRIMITIVE)
                        norm=(*normals)[originalIndex + _extraPrimitives];
                     else
                        norm=(*normals)[iprim]; // GWM Sep 2002 the flat shaded normal
                  }
                  if (cols4) {
                      primCol4=(*cols4)[iprim]; // GWM Dec 2003 the flat shaded rgba colour
                    if (_index>=cols4->size()) {
                        cols4->push_back(primCol4); // GWM Dec 2003 add flat shaded colour for new facet
                    }
                  }
                  if (cols3) {
                      primCol3=(*cols3)[iprim]; // GWM Dec 2003 flat shaded rgb colour
                    if (_index>=cols3->size()) {
                        cols3->push_back(primCol3); // GWM Dec 2003 add flat shaded colour for new facet
                    }
                  }
              }
              else
              { // later primitives use same colour
                  if (normals)
                  {
                      if (geom.getNormalBinding()==osg::Geometry::BIND_PER_PRIMITIVE)
                      {
                          _extraPrimitives++;
                          normals->insert(normals->begin() + originalIndex + _extraPrimitives, norm);
                      }
                      else
                        normals->push_back(norm); // GWM Sep 2002 add flat shaded normal for new facet
                  }
                  if (cols4 && _index>=cols4->size()) {
                    cols4->push_back(primCol4); // GWM Dec 2003 add flat shaded colour for new facet
                  }
                  if (cols3 && _index>=cols3->size()) {
                    if (cols3) cols3->push_back(primCol3); // GWM Dec 2003 add flat shaded colour for new facet
                  }
                  if (prim->_mode==GL_TRIANGLES) {
                      if (geom.getNormalBinding()==osg::Geometry::BIND_PER_PRIMITIVE_SET ||
                          geom.getNormalBinding()==osg::Geometry::BIND_PER_PRIMITIVE) { // need one per triangle? Not one per set.
                          for (int ii=1; ii<ntris; ii++) {
                              if (normals) normals->push_back(norm); // GWM Sep 2002 add flat shaded normal for new facet
                          }
                      }
                      if (geom.getColorBinding()==osg::Geometry::BIND_PER_PRIMITIVE_SET ||
                          geom.getColorBinding()==osg::Geometry::BIND_PER_PRIMITIVE) { // need one per triangle? Not one per set.
                          for (int ii=1; ii<ntris; ii++) {
                              if (cols3 && _index>=cols3->size()) {
                                  if (cols3) cols3->push_back(primCol3);
                              }
                              if (cols4 && _index>=cols4->size()) {
                                  if (cols4) cols4->push_back(primCol4);
                              }
                              _index++;
                          }
                      }
                  }
                  //        osg::notify(osg::WARN)<<"Add: "<< iprim << std::endl; 
              }
              iprim++; // GWM Sep 2002 count which normal we should use
        }
    }
}
예제 #11
0
void Tessellator::handleNewVertices(osg::Geometry& geom,VertexPtrToIndexMap &vertexPtrToIndexMap)
{
    if (!_newVertexList.empty())
    {
        
        osg::Vec3Array* vertices = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
        osg::Vec3Array* normals = NULL;
        if (geom.getNormalBinding()==osg::Geometry::BIND_PER_VERTEX)
        {
            normals = dynamic_cast<osg::Vec3Array*>(geom.getNormalArray());
        }
        
        typedef std::vector<osg::Array*> ArrayList;
        ArrayList arrays;
        
        if (geom.getColorBinding()==osg::Geometry::BIND_PER_VERTEX)
        {
            arrays.push_back(geom.getColorArray());
        }
        
        if (geom.getSecondaryColorBinding()==osg::Geometry::BIND_PER_VERTEX)
        {
            arrays.push_back(geom.getSecondaryColorArray());
        }
        
        if (geom.getFogCoordBinding()==osg::Geometry::BIND_PER_VERTEX)
        {
            arrays.push_back(geom.getFogCoordArray());
        }
        
        osg::Geometry::ArrayDataList& tcal = geom.getTexCoordArrayList();
        for(osg::Geometry::ArrayDataList::iterator tcalItr=tcal.begin();
            tcalItr!=tcal.end();
            ++tcalItr)
        {
            if (tcalItr->array.valid()) 
            {
                arrays.push_back(tcalItr->array.get());
            }
        }
        
        // now add any new vertices that are required.
        for(NewVertexList::iterator itr=_newVertexList.begin();
            itr!=_newVertexList.end();
            ++itr)
        {
            NewVertex& newVertex = (*itr);
            osg::Vec3* vertex = newVertex._vpos;
            
            // assign vertex.
            vertexPtrToIndexMap[vertex]=vertices->size();
            vertices->push_back(*vertex);
            
            // assign normals
            if (normals)
            {
                osg::Vec3 norm(0.0f,0.0f,0.0f);
                if (newVertex._v1) norm += (*normals)[vertexPtrToIndexMap[newVertex._v1]] * newVertex._f1;
                if (newVertex._v2) norm += (*normals)[vertexPtrToIndexMap[newVertex._v2]] * newVertex._f2;
                if (newVertex._v3) norm += (*normals)[vertexPtrToIndexMap[newVertex._v3]] * newVertex._f3;
                if (newVertex._v4) norm += (*normals)[vertexPtrToIndexMap[newVertex._v4]] * newVertex._f4;
                norm.normalize();
                normals->push_back(norm);
            }
            
            if (!arrays.empty())
            {
                InsertNewVertices inv(newVertex._f1,vertexPtrToIndexMap[newVertex._v1],
                    newVertex._f2,vertexPtrToIndexMap[newVertex._v2],
                    newVertex._f3,vertexPtrToIndexMap[newVertex._v3],
                    newVertex._f4,vertexPtrToIndexMap[newVertex._v4]);
                
                // assign the rest of the attributes.
                for(ArrayList::iterator aItr=arrays.begin();
                aItr!=arrays.end();
                ++aItr)
                {
                    (*aItr)->accept(inv);
                }
            }
        }
        
    }
    
}
예제 #12
0
void Tessellator::retessellatePolygons(osg::Geometry &geom)
{
#ifdef OSG_GLU_AVAILABLE
    // turn the contour list into primitives, a little like Tessellator does but more generally
    osg::Vec3Array* vertices = dynamic_cast<osg::Vec3Array*>(geom.getVertexArray());
    
    if (!vertices || vertices->empty() || geom.getPrimitiveSetList().empty()) return;


    // we currently don't handle geometry which use indices...
    if (geom.getVertexIndices() ||
        geom.getNormalIndices() ||
        geom.getColorIndices() ||
        geom.getSecondaryColorIndices() ||
        geom.getFogCoordIndices()) return;
        
    // not even text coord indices don't handle geometry which use indices...
    for(unsigned int unit=0;unit<geom.getNumTexCoordArrays();++unit)
    {
        if (geom.getTexCoordIndices(unit)) return;
    }

    if (_ttype==TESS_TYPE_POLYGONS || _ttype==TESS_TYPE_DRAWABLE) _numberVerts=0; // 09.04.04 GWM reset Tessellator
    // the reset is needed by the flt loader which reuses a Tessellator for triangulating polygons.
    // as such it might be reset by other loaders/developers in future.
    _index=0; // reset the counter for indexed vertices
    _extraPrimitives = 0;
    if (!_numberVerts) {
        _numberVerts=geom.getVertexArray()->getNumElements();
        // save the contours for complex (winding rule) tessellations
        _Contours=geom.getPrimitiveSetList();
    }

    // now cut out vertex attributes added on any previous tessellation
    reduceArray(geom.getVertexArray(), _numberVerts);
    reduceArray(geom.getColorArray(), _numberVerts);
    reduceArray(geom.getNormalArray(), _numberVerts);
    reduceArray(geom.getFogCoordArray(), _numberVerts);
    for(unsigned int unit1=0;unit1<geom.getNumTexCoordArrays();++unit1)
    {
        reduceArray(geom.getTexCoordArray(unit1), _numberVerts);
    }

    // remove the existing primitives.
    unsigned int nprimsetoriginal= geom.getNumPrimitiveSets();
    if (nprimsetoriginal) geom.removePrimitiveSet(0, nprimsetoriginal);

    // the main difference from osgUtil::Tessellator for Geometry sets of multiple contours is that the begin/end tessellation
    // occurs around the whole set of contours.
    if (_ttype==TESS_TYPE_GEOMETRY) {
        beginTessellation();
        gluTessProperty(_tobj, GLU_TESS_WINDING_RULE, _wtype);
        gluTessProperty(_tobj, GLU_TESS_BOUNDARY_ONLY , _boundaryOnly);
    }
    // process all the contours into the Tessellator
    int noContours = _Contours.size();
    int currentPrimitive = 0;
    for(int primNo=0;primNo<noContours;++primNo)
    {
        osg::ref_ptr<osg::PrimitiveSet> primitive = _Contours[primNo].get();
        if (_ttype==TESS_TYPE_POLYGONS || _ttype==TESS_TYPE_DRAWABLE)
        { // this recovers the 'old' tessellation which just retessellates single polygons.
            if (primitive->getMode()==osg::PrimitiveSet::POLYGON || _ttype==TESS_TYPE_DRAWABLE)
            {

                if (primitive->getType()==osg::PrimitiveSet::DrawArrayLengthsPrimitiveType)
                {
                    osg::DrawArrayLengths* drawArrayLengths = static_cast<osg::DrawArrayLengths*>(primitive.get());
                    unsigned int first = drawArrayLengths->getFirst(); 
                    for(osg::DrawArrayLengths::iterator itr=drawArrayLengths->begin();
                        itr!=drawArrayLengths->end();
                        ++itr)
                    {
                        beginTessellation();
                            unsigned int last = first + *itr;
                            addContour(primitive->getMode(),first,last,vertices);
                            first = last;
                        endTessellation();
                        collectTessellation(geom, currentPrimitive);
                        currentPrimitive++;
                    }
                }
                else
                {
                    if (primitive->getNumIndices()>3) { // April 2005 gwm only retessellate "complex" polygons
                        beginTessellation();
                        addContour(primitive.get(), vertices);
                        endTessellation();
                        collectTessellation(geom, currentPrimitive);
                        currentPrimitive++;
                    } else { // April 2005 gwm triangles don't need to be retessellated
                        geom.addPrimitiveSet(primitive.get());
                    }
                }

            }
            else
            { // copy the contour primitive as it is not being tessellated
                geom.addPrimitiveSet(primitive.get());
            }
        } else {
            if (primitive->getMode()==osg::PrimitiveSet::POLYGON ||
                primitive->getMode()==osg::PrimitiveSet::QUADS ||
                primitive->getMode()==osg::PrimitiveSet::TRIANGLES ||
                primitive->getMode()==osg::PrimitiveSet::LINE_LOOP ||
                primitive->getMode()==osg::PrimitiveSet::QUAD_STRIP ||
                primitive->getMode()==osg::PrimitiveSet::TRIANGLE_FAN ||
                primitive->getMode()==osg::PrimitiveSet::TRIANGLE_STRIP)
            {
                addContour(primitive.get(), vertices);
            } else { // copy the contour primitive as it is not being tessellated
                // in this case points, lines or line_strip
                geom.addPrimitiveSet(primitive.get());
            }
        }
    }
    if (_ttype==TESS_TYPE_GEOMETRY) {
        endTessellation();
    
        collectTessellation(geom, 0);    
    }
#endif
}
예제 #13
0
void
MeshConsolidator::convertToTriangles( osg::Geometry& geom, bool force )
{
    if ( !force && !canOptimize(geom) )
        return;

    osg::Geometry::PrimitiveSetList& primSets = geom.getPrimitiveSetList();
    osg::Geometry::PrimitiveSetList  triSets, nonTriSets;

    for( osg::Geometry::PrimitiveSetList::iterator i = primSets.begin(); i != primSets.end(); ++i )
    {
        osg::PrimitiveSet* pset = i->get();
        switch( pset->getMode() )
        {
        case osg::PrimitiveSet::TRIANGLES:
        case osg::PrimitiveSet::TRIANGLE_STRIP:
        case osg::PrimitiveSet::TRIANGLE_FAN:
        case osg::PrimitiveSet::QUADS:
        case osg::PrimitiveSet::QUAD_STRIP:
        case osg::PrimitiveSet::POLYGON:
            triSets.push_back( pset );
            break;

        default:
            nonTriSets.push_back( pset );
        }
    }

    if ( triSets.size() > 0 )
    {
        // we are assuming at this point that all the primitive sets in a single geometry
        // share a single user data structure.
        osg::Referenced* sharedUserData = triSets[0]->getUserData();

        osg::Array* vertexArray = geom.getVertexArray();
        unsigned numVerts = vertexArray->getNumElements();
        osg::Geometry::PrimitiveSetList newPrimSets;

        if ( numVerts < 0x100 )
        {
            osg::TriangleIndexFunctor< Collector<osg::DrawElementsUByte> > collector;
            collector._newPrimSets = &newPrimSets;
            collector._maxSize = 0xFF;
            geom.accept( collector );
        }
        else if ( numVerts < 0x10000 )
        {
            osg::TriangleIndexFunctor< Collector<osg::DrawElementsUShort> > collector;
            collector._newPrimSets = &newPrimSets;
            collector._maxSize = 0xFFFF;
            geom.accept( collector );
        }
        else
        {
#ifdef OSG_GLES2_AVAILABLE
            // GLES only supports UShort, not UInt
            osg::TriangleIndexFunctor< Collector<osg::DrawElementsUShort> > collector;
            collector._newPrimSets = &newPrimSets;
            collector._maxSize = 0xFFFF;
            geom.accept( collector );
#else
            osg::TriangleIndexFunctor< Collector<osg::DrawElementsUInt> > collector;
            collector._newPrimSets = &newPrimSets;
            collector._maxSize = 0xFFFFFFFF;
            geom.accept( collector );
#endif
        }

        for( osg::Geometry::PrimitiveSetList::iterator i = newPrimSets.begin(); i != newPrimSets.end(); ++i )
        {
            i->get()->setUserData( sharedUserData );
            nonTriSets.push_back( i->get() );
        }
    }

    geom.setPrimitiveSetList( nonTriSets );
}
예제 #14
0
파일: Utils.cpp 프로젝트: bblu/osgearth
void
GeometryValidator::apply(osg::Geometry& geom)
{
    unsigned numVerts = geom.getVertexArray()->getNumElements();

    if ( geom.getColorArray() )
    {
        if ( geom.getColorBinding() == osg::Geometry::BIND_OVERALL && geom.getColorArray()->getNumElements() != 1 )
        {
            OE_WARN << "Color: BIND_OVERALL with wrong number of elements" << std::endl;
        }
        else if ( geom.getColorBinding() == osg::Geometry::BIND_PER_VERTEX && geom.getColorArray()->getNumElements() != numVerts )
        {
            OE_WARN << "Color: BIND_PER_VERTEX with color.size != verts.size" << std::endl;
        }
    }

    if ( geom.getNormalArray() )
    {
        if ( geom.getNormalBinding() == osg::Geometry::BIND_OVERALL && geom.getNormalArray()->getNumElements() != 1 )
        {
            OE_WARN << "Normal: BIND_OVERALL with wrong number of elements" << std::endl;
        }
        else if ( geom.getNormalBinding() == osg::Geometry::BIND_PER_VERTEX && geom.getNormalArray()->getNumElements() != numVerts )
        {
            OE_WARN << "Normal: BIND_PER_VERTEX with color.size != verts.size" << std::endl;
        }
    }

    const osg::Geometry::PrimitiveSetList& plist = geom.getPrimitiveSetList();

    for( osg::Geometry::PrimitiveSetList::const_iterator p = plist.begin(); p != plist.end(); ++p )
    {
        osg::PrimitiveSet* pset = p->get();

        osg::DrawElementsUByte* de_byte = dynamic_cast<osg::DrawElementsUByte*>(pset);
        if ( de_byte )
        {
            if ( numVerts > 0xFF )
            {
                OE_WARN << "DrawElementsUByte used when numVerts > 255 (" << numVerts << ")" << std::endl;
            }
            validateDE(de_byte, 0xFF, numVerts );
        }

        osg::DrawElementsUShort* de_short = dynamic_cast<osg::DrawElementsUShort*>(pset);
        if ( de_short )
        {
            if ( numVerts > 0xFFFF )
            {
                OE_WARN << "DrawElementsUShort used when numVerts > 65535 (" << numVerts << ")" << std::endl;
            }
            validateDE(de_short, 0xFFFF, numVerts );
        }

        osg::DrawElementsUInt* de_int = dynamic_cast<osg::DrawElementsUInt*>(pset);
        if ( de_int )
        {
            validateDE(de_int, 0xFFFFFFFF, numVerts );
        }
    }
}
예제 #15
0
void IndexMeshVisitor::apply(osg::Geometry& geom) {
    // TODO: this is deprecated
    if (geom.getNormalBinding() == osg::Geometry::BIND_PER_PRIMITIVE_SET) return;
    if (geom.getColorBinding() == osg::Geometry::BIND_PER_PRIMITIVE_SET) return;
    if (geom.getSecondaryColorBinding() == osg::Geometry::BIND_PER_PRIMITIVE_SET) return;
    if (geom.getFogCoordBinding() == osg::Geometry::BIND_PER_PRIMITIVE_SET) return;

    // no point optimizing if we don't have enough vertices.
    if (!geom.getVertexArray() || geom.getVertexArray()->getNumElements() < 3) return;


    osgUtil::SharedArrayOptimizer deduplicator;
    deduplicator.findDuplicatedUVs(geom);

    // duplicate shared arrays as it isn't safe to rearrange vertices when arrays are shared.
    if (geom.containsSharedArrays()) {
        geom.duplicateSharedArrays();
    }

    osg::Geometry::PrimitiveSetList& primitives = geom.getPrimitiveSetList();
    osg::Geometry::PrimitiveSetList::iterator itr;

    osg::Geometry::PrimitiveSetList new_primitives;
    new_primitives.reserve(primitives.size());

    // compute duplicate vertices
    typedef std::vector<unsigned int> IndexList;
    unsigned int numVertices = geom.getVertexArray()->getNumElements();
    IndexList indices(numVertices);
    unsigned int i, j;
    for(i = 0 ; i < numVertices ; ++ i) {
        indices[i] = i;
    }

    VertexAttribComparitor arrayComparitor(geom);
    std::sort(indices.begin(), indices.end(), arrayComparitor);

    unsigned int lastUnique = 0;
    unsigned int numUnique = 1;
    for(i = 1 ; i < numVertices ; ++ i) {
        if (arrayComparitor.compare(indices[lastUnique], indices[i]) != 0) {
            lastUnique = i;
            ++ numUnique;
        }
    }

    IndexList remapDuplicatesToOrignals(numVertices);
    lastUnique = 0;
    for(i = 1 ; i < numVertices ; ++ i) {
        if (arrayComparitor.compare(indices[lastUnique],indices[i]) != 0) {
            // found a new vertex entry, so previous run of duplicates needs
            // to be put together.
            unsigned int min_index = indices[lastUnique];
            for(j = lastUnique + 1 ; j < i ; ++ j) {
                min_index = osg::minimum(min_index, indices[j]);
            }
            for(j = lastUnique ; j < i ; ++ j) {
                remapDuplicatesToOrignals[indices[j]] = min_index;
            }
            lastUnique = i;
        }
    }

    unsigned int min_index = indices[lastUnique];
    for(j = lastUnique + 1 ; j < i ; ++ j) {
        min_index = osg::minimum(min_index, indices[j]);
    }
    for(j = lastUnique ; j < i ; ++ j) {
        remapDuplicatesToOrignals[indices[j]] = min_index;
    }

    // copy the arrays.
    IndexList finalMapping(numVertices);
    IndexList copyMapping;
    copyMapping.reserve(numUnique);
    unsigned int currentIndex = 0;
    for(i = 0 ; i < numVertices ; ++ i) {
        if (remapDuplicatesToOrignals[i] == i) {
            finalMapping[i] = currentIndex;
            copyMapping.push_back(i);
            currentIndex++;
        }
        else {
            finalMapping[i] = finalMapping[remapDuplicatesToOrignals[i]];
        }
    }

    // remap any shared vertex attributes
    RemapArray ra(copyMapping);
    arrayComparitor.accept(ra);

    // triangulate faces
    {
        TriangleIndexor ti;
        ti._maxIndex = numVertices;
        ti._remapping = finalMapping;

        for(itr = primitives.begin() ; itr != primitives.end() ; ++ itr) {
            (*itr)->accept(ti);
        }

        addDrawElements(ti._indices, osg::PrimitiveSet::TRIANGLES, new_primitives);
    }

    // line-ify line-type primitives
    {
        LineIndexor li, wi; // lines and wireframes
        li._maxIndex = numVertices;
        wi._maxIndex = numVertices;
        li._remapping = finalMapping;
        wi._remapping = finalMapping;

        for(itr = primitives.begin() ; itr != primitives.end() ; ++ itr) {
            bool isWireframe = false;
            if((*itr)->getUserValue("wireframe", isWireframe) && isWireframe) {
                (*itr)->accept(wi);
            }
            else {
                (*itr)->accept(li);
            }
        }
        addDrawElements(li._indices, osg::PrimitiveSet::LINES, new_primitives);
        addDrawElements(wi._indices, osg::PrimitiveSet::LINES, new_primitives, "wireframe");
    }

    // adds points primitives
    {
        IndexList points;
        for(itr = primitives.begin() ; itr != primitives.end() ; ++ itr) {
            if((*itr) && (*itr)->getMode() == osg::PrimitiveSet::POINTS) {
                for(unsigned int k = 0 ; k < (*itr)->getNumIndices() ; ++ k) {
                    points.push_back(finalMapping[(*itr)->index(k)]);
                }
            }
        }
        addDrawElements(points, osg::PrimitiveSet::POINTS, new_primitives);
    }

    geom.setPrimitiveSetList(new_primitives);
    deduplicator.deduplicateUVs(geom);
    setProcessed(&geom);
}