void Init_MCU() {

  CM1CON  = 0;                    // Turn off comparators
  CM2CON  = 0;
  AD1PCFG = 0xff;                 // Make all inputs digital

  PMMODE = 0;
  PMAEN  = 0;
  PMCON  = 0;  // WRSP: Write Strobe Polarity bit
  PMMODEbits.MODE = 2;     // Master 2
  PMMODEbits.WAITB = 0;
  PMMODEbits.WAITM = 1;
  PMMODEbits.WAITE = 0;
  PMMODEbits.MODE16 = 1;   // 16 bit mode
  PMCONbits.CSF = 0;
  PMCONbits.PTRDEN = 1;
  PMCONbits.PTWREN = 1;
  PMCONbits.PMPEN = 1;
  TP_TFT_Rotate_180(0);
  TFT_Set_Active(Set_Index,Write_Command,Write_Data);
        
  //UART2_INIT(256000);               // INITIALIZE UART MODULE AT 256000 BAUD
  //UART_Set_Active(&UART2_Read, &UART2_Write, &UART2_Data_Ready, &UART2_Tx_Idle);
  //DELAY_MS(100);                  // WAIT FOR UART MODULE TO STABILIZE
  
}
void DrawScreen(TScreen *aScreen) {
 int order;
  char save_bled, save_bled_direction;

  object_pressed = 0;
  order = 0;
  CurrentScreen = aScreen;

  if ((display_width != CurrentScreen->Width) || (display_height != CurrentScreen->Height)) {
    save_bled = TFT_BLED;
    save_bled_direction = TFT_BLED_Direction;
    TFT_BLED_Direction = 0;
    TFT_BLED           = 0;
    TFT_Set_Active(Set_Index, Write_Command, Write_Data);
    TFT_Init(CurrentScreen->Width, CurrentScreen->Height);
    TFT_Set_Ext_Buffer(TFT_Get_Data);
    TP_TFT_Init(CurrentScreen->Width, CurrentScreen->Height, 13, 12);                                  // Initialize touch panel
    TP_TFT_Set_ADC_Threshold(ADC_THRESHOLD);                              // Set touch panel ADC threshold
    TFT_Fill_Screen(CurrentScreen->Color);
    display_width = CurrentScreen->Width;
    display_height = CurrentScreen->Height;
    TFT_BLED           = save_bled;
    TFT_BLED_Direction = save_bled_direction;
  }
  else
    TFT_Fill_Screen(CurrentScreen->Color);


  while (order < CurrentScreen->ObjectsCount) {
  }
}
static void InitializeTouchPanel() {
  Init_ADC();
  TFT_Set_Active(Set_Index, Write_Command, Write_Data);
  TFT_Init(320, 240);

  TP_TFT_Init(320, 240, 13, 12);                                  // Initialize touch panel
  TP_TFT_Set_ADC_Threshold(ADC_THRESHOLD);                              // Set touch panel ADC threshold

}
void Init_MCU() {
  TRISE = 0;
  TFT_DataPort_Direction = 0;
  CLKDIVbits.PLLPRE = 0;      // PLLPRE<4:0> = 0  ->  N1 = 2    8MHz / 2 = 4MHz
                              // (must be within 0.8 MHz to 8 MHz range)
  PLLFBD =   30;              // PLLDIV<8:0> = 30 ->  M = 32    4MHz * 32 = 128MHz
                              // (must be within 100 MHz to 200 MHz range)
  CLKDIVbits.PLLPOST = 0;     // PLLPOST<1:0> = 0 ->  N2 = 2    128MHz / 2 = 64MHz
                              // (must be within 12.5 MHz to 80 MHz range)
  Delay_ms(150);
  TP_TFT_Rotate_180(0);
  TFT_Set_Active(Set_Index,Write_Command,Write_Data);
}
static void InitializeTouchPanel() {
  Init_ADC();
  TFT_Set_Active(Set_Index, Write_Command, Write_Data);
  TFT_Init(320, 240);
  TFT_Set_Ext_Buffer(TFT_Get_Data);

  TP_TFT_Init(320, 240, 13, 12);                                  // Initialize touch panel
  TP_TFT_Set_ADC_Threshold(ADC_THRESHOLD);                              // Set touch panel ADC threshold

  PenDown = 0;
  PressedObject = 0;
  PressedObjectType = -1;
}
Exemplo n.º 6
0
void Init_MCU() {
  PMMODE = 0;
  PMAEN  = 0;
  PMCON  = 0;  // WRSP: Write Strobe Polarity bit
  PMMODEbits.MODE = 2;     // Master 2
  PMMODEbits.WAITB = 0;
  PMMODEbits.WAITM = 1;
  PMMODEbits.WAITE = 0;
  PMMODEbits.MODE16 = 1;   // 16 bit mode
  PMCONbits.CSF = 0;
  PMCONbits.PTRDEN = 1;
  PMCONbits.PTWREN = 1;
  PMCONbits.PMPEN = 1;
  TP_TFT_Rotate_180(0);
  TFT_Set_Active(Set_Index,Write_Command,Write_Data);
}
void DrawScreen(TScreen *aScreen) {
 int order;
  unsigned short button_idx;
  TButton *local_button;
  unsigned short image_idx;
  TImage *local_image;
  unsigned short radio_button_idx;
  TRadioButton *local_radio_button;
  char save_bled, save_bled_direction;

  object_pressed = 0;
  order = 0;
  button_idx = 0;
  image_idx = 0;
  radio_button_idx = 0;
  CurrentScreen = aScreen;

  if ((display_width != CurrentScreen->Width) || (display_height != CurrentScreen->Height)) {
    save_bled = TFT_BLED;
    save_bled_direction = TFT_BLED_Direction;
    TFT_BLED_Direction = 0;
    TFT_BLED           = 0;
    TFT_Set_Active(Set_Index, Write_Command, Write_Data);
    TFT_Init(CurrentScreen->Width, CurrentScreen->Height);
    TFT_Set_Ext_Buffer(TFT_Get_Data);
    TP_TFT_Init(CurrentScreen->Width, CurrentScreen->Height, 13, 12);                                  // Initialize touch panel
    TP_TFT_Set_ADC_Threshold(ADC_THRESHOLD);                              // Set touch panel ADC threshold
    TFT_Fill_Screen(CurrentScreen->Color);
    display_width = CurrentScreen->Width;
    display_height = CurrentScreen->Height;
    TFT_BLED           = save_bled;
    TFT_BLED_Direction = save_bled_direction;
  }
  else
    TFT_Fill_Screen(CurrentScreen->Color);


  while (order < CurrentScreen->ObjectsCount) {
    if (button_idx < CurrentScreen->ButtonsCount) {
      local_button = GetButton(button_idx);
      if (order == local_button->Order) {
        button_idx++;
        order++;
        DrawButton(local_button);
      }
    }

    if (image_idx  < CurrentScreen->ImagesCount) {
      local_image = GetImage(image_idx);
      if (order == local_image->Order) {
        image_idx++;
        order++;
        DrawImage(local_image);
      }
    }

    if (radio_button_idx  < CurrentScreen->RadioButtonsCount) {
      local_radio_button = GetRadioButton(radio_button_idx);
      if (order == local_radio_button->Order) {
        radio_button_idx++;
        order++;
        DrawRadioButton(local_radio_button);
      }
    }

  }
}
Exemplo n.º 8
0
void DrawScreen(TScreen *aScreen) {
 unsigned int order;
  unsigned short round_button_idx;
  TButton_Round *local_round_button;
  unsigned short label_idx;
  TLabel *local_label;
  unsigned short image_idx;
  TImage *local_image;
  char save_bled, save_bled_direction;

  object_pressed = 0;
  order = 0;
  round_button_idx = 0;
  label_idx = 0;
  image_idx = 0;
  CurrentScreen = aScreen;

  if ((display_width != CurrentScreen->Width) || (display_height != CurrentScreen->Height)) {
    save_bled = TFT_BLED;
    save_bled_direction = TFT_BLED_Direction;
    TFT_BLED_Direction = 0;
    TFT_BLED           = 0;
    TFT_Set_Active(Set_Index, Write_Command, Write_Data);
    TFT_Init(CurrentScreen->Width, CurrentScreen->Height);
    TP_TFT_Init(CurrentScreen->Width, CurrentScreen->Height, 13, 12);                                  // Initialize touch panel
    TP_TFT_Set_ADC_Threshold(ADC_THRESHOLD);                              // Set touch panel ADC threshold
    TFT_Fill_Screen(CurrentScreen->Color);
    display_width = CurrentScreen->Width;
    display_height = CurrentScreen->Height;
    TFT_BLED           = save_bled;
    TFT_BLED_Direction = save_bled_direction;
  }
  else
    TFT_Fill_Screen(CurrentScreen->Color);


  while (order < CurrentScreen->ObjectsCount) {
    if (round_button_idx < CurrentScreen->Buttons_RoundCount) {
      local_round_button = GetRoundButton(round_button_idx);
      if (order == local_round_button->Order) {
        round_button_idx++;
        order++;
        DrawRoundButton(local_round_button);
      }
    }

    if (label_idx < CurrentScreen->LabelsCount) {
      local_label = GetLabel(label_idx);
      if (order == local_label->Order) {
        label_idx++;
        order++;
        DrawLabel(local_label);
      }
    }

    if (image_idx < CurrentScreen->ImagesCount) {
      local_image = GetImage(image_idx);
      if (order == local_image->Order) {
        image_idx++;
        order++;
        DrawImage(local_image);
      }
    }

  }
}