/**
*
* Register a fast handler function for a specific interrupt ID. The handler
* function will be called when an interrupt occurs for the given interrupt ID.
*
* @param BaseAddress is the base address of the interrupt controller
* whose vector table will be modified.
* @param InterruptId is the interrupt ID to be associated with the input
* handler.
* @param FastHandler is the function pointer that will be called when
* interrupt occurs
*
* @return None.
*
* @note
*
* Note that this function has no effect if the input base address is invalid.
*
******************************************************************************/
void XIntc_RegisterFastHandler(u32 BaseAddress, u8 Id,
XFastInterruptHandler FastHandler)
{
u32 CurrentIER;
u32 Mask;
u32 Imr;
CurrentIER = XIntc_In32(BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[Id];
if (CurrentIER & Mask) {
/* Disable Interrupt if it was enabled */
CurrentIER = XIntc_In32(BaseAddress + XIN_IER_OFFSET);
XIntc_Out32(BaseAddress + XIN_IER_OFFSET,(CurrentIER & ~Mask));
}
XIntc_Out32(BaseAddress + XIN_IVAR_OFFSET + (Id * 4),
(u32) FastHandler);
Imr = XIntc_In32(BaseAddress + XIN_IMR_OFFSET);
XIntc_Out32(BaseAddress + XIN_IMR_OFFSET, Imr | Mask);
/* Enable Interrupt if it was enabled before calling this function */
if (CurrentIER & Mask) {
CurrentIER = XIntc_In32(BaseAddress + XIN_IER_OFFSET);
XIntc_Out32(BaseAddress + XIN_IER_OFFSET,(CurrentIER | Mask));
}
}
/**
*
* Acknowledges the interrupt source provided as the argument Id. When the
* interrupt is acknowledged, it causes the interrupt controller to clear its
* interrupt condition.In Cascade mode, acknowledges corresponding interrupt
* source of Slave controllers depending on the Id.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being
* the highest priority interrupt.
*
* @return None.
*
* @note None.
*
****************************************************************************/
void XIntc_Acknowledge(XIntc * InstancePtr, u8 Id)
{
u32 Mask;
XIntc_Config *CfgPtr;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
if (Id > 31) {
/* Enable user required Id in Slave controller */
CfgPtr = XIntc_LookupConfig(Id/32);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[(Id%32)];
XIntc_Out32(CfgPtr->BaseAddress + XIN_IAR_OFFSET, Mask);
} else {
/*
* The Id is used to create the appropriate mask for the
* desired bit position.
*/
Mask = XIntc_BitPosMask[Id];
/*
* Acknowledge the selected interrupt source, no read of the
* acknowledge register is necessary since only the bits set
* in the mask will be affected by the write
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_IAR_OFFSET, Mask);
}
}
/**
*
* Updates the interrupt table with the Null Handler and NULL arguments at the
* location pointed at by the Id. This effectively disconnects that interrupt
* source from any handler. The interrupt is disabled also. In Cascade mode,
* disconnects handler from Slave controller handler table depending on the
* interrupt Id.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being
* the highest priority interrupt.
*
* @return None.
*
* @note None.
*
****************************************************************************/
void XIntc_Disconnect(XIntc * InstancePtr, u8 Id)
{
u32 CurrentIER;
u32 Mask;
XIntc_Config *CfgPtr;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* Disable the interrupt such that it won't occur while disconnecting
* the handler, only disable the specified interrupt id without
* modifying the other interrupt ids
*/
/* Disconnect Handlers for Slave controllers in Cascade Mode */
if (Id > 31) {
CfgPtr = XIntc_LookupConfig(Id/32);
CurrentIER = XIntc_In32(CfgPtr->BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[(Id%32)];
XIntc_Out32(CfgPtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER & ~Mask));
/*
* Disconnect the handler and connect a stub, the callback
* reference must be set to this instance to allow unhandled
* interrupts to be tracked
*/
CfgPtr->HandlerTable[Id%32].Handler = StubHandler;
CfgPtr->HandlerTable[Id%32].CallBackRef = InstancePtr;
}
/* Disconnect Handlers for Master/primary controller */
else {
CurrentIER = XIntc_In32(InstancePtr->BaseAddress +
XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[Id];
XIntc_Out32(InstancePtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER & ~Mask));
InstancePtr->CfgPtr->HandlerTable[Id%32].Handler =
StubHandler;
InstancePtr->CfgPtr->HandlerTable[Id%32].CallBackRef =
InstancePtr;
}
}
/**
*
* Disables the interrupt source provided as the argument Id such that the
* interrupt controller will not cause interrupts for the specified Id. The
* interrupt controller will continue to hold an interrupt condition for the
* Id, but will not cause an interrupt.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being the
* highest priority interrupt.
*
* @return None.
*
* @note None.
*
****************************************************************************/
void XIntc_Disable(XIntc * InstancePtr, u8 Id)
{
u32 CurrentIER;
u32 Mask;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* The Id is used to create the appropriate mask for the
* desired bit position. Id currently limited to 0 - 31
*/
Mask = XIntc_BitPosMask[Id];
/*
* Disable the selected interrupt source by reading the interrupt enable
* register and then modifying only the specified interrupt id
*/
CurrentIER = XIntc_In32(InstancePtr->BaseAddress + XIN_IER_OFFSET);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER & ~Mask));
}
/**
*
* Updates the interrupt table with the Null Handler and NULL arguments at the
* location pointed at by the Id. This effectively disconnects that interrupt
* source from any handler. The interrupt is disabled also.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being the
* highest priority interrupt.
*
* @return None.
*
* @note None.
*
****************************************************************************/
void XIntc_Disconnect(XIntc * InstancePtr, u8 Id)
{
u32 CurrentIER;
u32 Mask;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* Disable the interrupt such that it won't occur while disconnecting
* the handler, only disable the specified interrupt id without
* modifying the other interrupt ids
*/
CurrentIER = XIntc_In32(InstancePtr->BaseAddress + XIN_IER_OFFSET);
Mask = XIntc_BitPosMask[Id];/* convert from integer id to bit mask */
XIntc_Out32(InstancePtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER & ~Mask));
/*
* Disconnect the handler and connect a stub, the callback reference
* must be set to this instance to allow unhandled interrupts to be
* tracked
*/
InstancePtr->CfgPtr->HandlerTable[Id].Handler = StubHandler;
InstancePtr->CfgPtr->HandlerTable[Id].CallBackRef = InstancePtr;
}
/**
*
* Starts the interrupt controller by enabling the output from the controller
* to the processor. Interrupts may be generated by the interrupt controller
* after this function is called.
*
* It is necessary for the caller to connect the interrupt handler of this
* component to the proper interrupt source.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Mode determines if software is allowed to simulate interrupts or
* real interrupts are allowed to occur. Note that these modes are
* mutually exclusive. The interrupt controller hardware resets in
* a mode that allows software to simulate interrupts until this
* mode is exited. It cannot be reentered once it has been exited.
*
* One of the following values should be used for the mode.
* - XIN_SIMULATION_MODE enables simulation of interrupts only
* - XIN_REAL_MODE enables hardware interrupts only
*
* @return
* - XST_SUCCESS if the device was started successfully
* - XST_FAILURE if simulation mode was specified and it could not
* be set because real mode has already been entered.
*
* @note Must be called after XIntc initialization is completed.
*
******************************************************************************/
int XIntc_Start(XIntc * InstancePtr, u8 Mode)
{
u32 MasterEnable = XIN_INT_MASTER_ENABLE_MASK;
/*
* Assert the arguments
*/
Xil_AssertNonvoid(InstancePtr != NULL);
Xil_AssertNonvoid((Mode == XIN_SIMULATION_MODE) ||
(Mode == XIN_REAL_MODE))
Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* Check for simulation mode
*/
if (Mode == XIN_SIMULATION_MODE) {
if (MasterEnable & XIN_INT_HARDWARE_ENABLE_MASK) {
return XST_FAILURE;
}
}
else {
MasterEnable |= XIN_INT_HARDWARE_ENABLE_MASK;
}
/*
* Indicate the instance is ready to be used and is started before we
* enable the device.
*/
InstancePtr->IsStarted = XIL_COMPONENT_IS_STARTED;
XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, MasterEnable);
return XST_SUCCESS;
}
/**
*
* Starts the interrupt controller by enabling the output from the controller
* to the processor. Interrupts may be generated by the interrupt controller
* after this function is called.
*
* It is necessary for the caller to connect the interrupt handler of this
* component to the proper interrupt source. This function also starts Slave
* controllers in Cascade mode.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Mode determines if software is allowed to simulate interrupts or
* real interrupts are allowed to occur. Note that these modes are
* mutually exclusive. The interrupt controller hardware resets in
* a mode that allows software to simulate interrupts until this
* mode is exited. It cannot be reentered once it has been exited.
*
* One of the following values should be used for the mode.
* - XIN_SIMULATION_MODE enables simulation of interrupts only
* - XIN_REAL_MODE enables hardware interrupts only
*
* @return
* - XST_SUCCESS if the device was started successfully
* - XST_FAILURE if simulation mode was specified and it could not
* be set because real mode has already been entered.
*
* @note Must be called after XIntc initialization is completed.
*
******************************************************************************/
int XIntc_Start(XIntc * InstancePtr, u8 Mode)
{
u32 MasterEnable = XIN_INT_MASTER_ENABLE_MASK;
XIntc_Config *CfgPtr;
int Index;
/*
* Assert the arguments
*/
Xil_AssertNonvoid(InstancePtr != NULL);
Xil_AssertNonvoid((Mode == XIN_SIMULATION_MODE) ||
(Mode == XIN_REAL_MODE))
Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* Check for simulation mode
*/
if (Mode == XIN_SIMULATION_MODE) {
if (MasterEnable & XIN_INT_HARDWARE_ENABLE_MASK) {
return XST_FAILURE;
}
}
else {
MasterEnable |= XIN_INT_HARDWARE_ENABLE_MASK;
}
/*
* Indicate the instance is ready to be used and is started before we
* enable the device.
*/
InstancePtr->IsStarted = XIL_COMPONENT_IS_STARTED;
/* Start the Slaves for Cascade Mode */
if (InstancePtr->CfgPtr->IntcType != XIN_INTC_NOCASCADE) {
for (Index = 1; Index <= XPAR_XINTC_NUM_INSTANCES - 1; Index++)
{
CfgPtr = XIntc_LookupConfig(Index);
XIntc_Out32(CfgPtr->BaseAddress + XIN_MER_OFFSET,
MasterEnable);
}
}
/* Start the master */
XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, MasterEnable);
return XST_SUCCESS;
}
/**
*
* Enables the interrupt source provided as the argument Id. Any pending
* interrupt condition for the specified Id will occur after this function is
* called. In Cascade mode, enables corresponding interrupt of Slave controllers
* depending on the Id.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being
* the highest priority interrupt.
*
* @return None.
*
* @note None.
*
****************************************************************************/
void XIntc_Enable(XIntc * InstancePtr, u8 Id)
{
u32 CurrentIER;
u32 Mask;
XIntc_Config *CfgPtr;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
if (Id > 31) {
/* Enable user required Id in Slave controller */
CfgPtr = XIntc_LookupConfig(Id/32);
CurrentIER = XIntc_In32(CfgPtr->BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[(Id%32)];
XIntc_Out32(CfgPtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER | Mask));
}
else {
/*
* The Id is used to create the appropriate mask for the
* desired bit position.
*/
Mask = XIntc_BitPosMask[Id];
/*
* Enable the selected interrupt source by reading the
* interrupt enable register and then modifying only the
* specified interrupt id enable
*/
CurrentIER = XIntc_In32(InstancePtr->BaseAddress +
XIN_IER_OFFSET);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER | Mask));
}
}
/**
*
* Stops the interrupt controller by disabling the output from the controller
* so that no interrupts will be caused by the interrupt controller.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
*
* @return None.
*
* @note None.
*
******************************************************************************/
void XIntc_Stop(XIntc * InstancePtr)
{
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* Stop all interrupts from occurring thru the interrupt controller by
* disabling all interrupts in the MER register
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, 0);
InstancePtr->IsStarted = 0;
}
/**
*
* Allows software to simulate an interrupt in the interrupt controller. This
* function will only be successful when the interrupt controller has been
* started in simulation mode. Once it has been started in real mode,
* interrupts cannot be simulated. A simulated interrupt allows the interrupt
* controller to be tested without any device to drive an interrupt input
* signal into it.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id is the interrupt ID for which to simulate an interrupt.
*
* @return
* - XST_SUCCESS if successful
* - XST_FAILURE if the interrupt could not be
* simulated because the interrupt controller is or
* has previously been in real mode.
*
* @note None.
*
******************************************************************************/
int XIntc_SimulateIntr(XIntc * InstancePtr, u8 Id)
{
u32 Mask;
u32 MasterEnable;
/*
* Assert the arguments
*/
XASSERT_NONVOID(InstancePtr != NULL);
XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
XASSERT_NONVOID(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
/* Get the contents of the master enable register and determine if
* hardware interrupts have already been enabled, if so, this is a write
* once bit such that simulation can't be done at this point because
* the ISR register is no longer writable by software
*/
MasterEnable = XIntc_In32(InstancePtr->BaseAddress + XIN_MER_OFFSET);
if (MasterEnable & XIN_INT_HARDWARE_ENABLE_MASK) {
return XST_FAILURE;
}
/*
* The Id is used to create the appropriate mask for the
* desired bit position. Id currently limited to 0 - 31
*/
Mask = XIntc_BitPosMask[Id];
/*
* Enable the selected interrupt source by reading the interrupt enable
* register and then modifying only the specified interrupt id enable
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_ISR_OFFSET, Mask);
/* indicate the interrupt was successfully simulated */
return XST_SUCCESS;
}
/**
*
* Acknowledges the interrupt source provided as the argument Id. When the
* interrupt is acknowledged, it causes the interrupt controller to clear its
* interrupt condition.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being the
* highest priority interrupt.
*
* @return None.
*
* @note None.
*
****************************************************************************/
void XIntc_Acknowledge(XIntc * InstancePtr, u8 Id)
{
u32 Mask;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* The Id is used to create the appropriate mask for the
* desired bit position. Id currently limited to 0 - 31
*/
Mask = XIntc_BitPosMask[Id];
/*
* Acknowledge the selected interrupt source, no read of the acknowledge
* register is necessary since only the bits set in the mask will be
* affected by the write
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_IAR_OFFSET, Mask);
}
xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength )
{
unsigned long ulControlReg, ulMask;
/* NOTE: The baud rate used by this driver is determined by the hardware
parameterization of the UART Lite peripheral, and the baud value passed to
this function has no effect. */
/* Create the queues used to hold Rx and Tx characters. */
xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) );
if( ( xRxedChars ) && ( xCharsForTx ) )
{
/* Disable the interrupt. */
XUartLite_mDisableIntr( XPAR_RS232_UART_BASEADDR );
/* Flush the fifos. */
ulControlReg = XIo_In32( XPAR_RS232_UART_BASEADDR + XUL_STATUS_REG_OFFSET );
XIo_Out32( XPAR_RS232_UART_BASEADDR + XUL_CONTROL_REG_OFFSET, ulControlReg | XUL_CR_FIFO_TX_RESET | XUL_CR_FIFO_RX_RESET );
/* Enable the interrupt again. The interrupt controller has not yet been
initialised so there is no chance of receiving an interrupt until the
scheduler has been started. */
XUartLite_mEnableIntr( XPAR_RS232_UART_BASEADDR );
/* Enable the interrupt in the interrupt controller while maintaining
all the other bit settings. */
ulMask = XIntc_In32( ( XPAR_OPB_INTC_0_BASEADDR + XIN_IER_OFFSET ) );
ulMask |= XPAR_RS232_UART_INTERRUPT_MASK;
XIntc_Out32( ( XPAR_OPB_INTC_0_BASEADDR + XIN_IER_OFFSET ), ( ulMask ) );
XIntc_mAckIntr( XPAR_INTC_SINGLE_BASEADDR, 2 );
}
return ( xComPortHandle ) 0;
}
/**
*
* Sets the normal interrupt mode for the specified interrupt in the Interrupt
* Mode Register. In Cascade mode disconnects handler from corresponding Slave
* controller IVAR register depending on the Id and sets all interrupt sources
* of the Slave controller as normal interrupts.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being the
* highest priority interrupt.
*
* @return None.
*
* @note
* Slave controllers in Cascade Mode should have all as Fast
* interrupts or Normal interrupts, mixed interrupts are not
* supported
*
****************************************************************************/
void XIntc_SetNormalIntrMode(XIntc *InstancePtr, u8 Id)
{
u32 Imr;
u32 CurrentIER;
u32 Mask;
XIntc_Config *CfgPtr;
/*
* Assert the arguments
*/
Xil_AssertVoid(InstancePtr != NULL);
Xil_AssertVoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertVoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
Xil_AssertVoid(InstancePtr->CfgPtr->FastIntr == TRUE);
if (Id > 31) {
/* Enable user required Id in Slave controller */
CfgPtr = XIntc_LookupConfig(Id/32);
/* Get the Enabled Interrupts */
CurrentIER = XIntc_In32(CfgPtr->BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[(Id%32)];
/* Disable the Interrupt if it was enabled before calling
* this function
*/
if (CurrentIER & Mask) {
XIntc_Disable(InstancePtr, Id);
}
/* Slave controllers in Cascade Mode should have all as Fast
* interrupts or Normal interrupts, mixed interrupts are not
* supported
*/
XIntc_Out32(CfgPtr->BaseAddress + XIN_IMR_OFFSET, 0x0);
if (CfgPtr->IntVectorAddr == 0x0) {
XIntc_Out32(CfgPtr->BaseAddress + XIN_IVAR_OFFSET +
(Id * 4), 0x10);
} else {
XIntc_Out32(CfgPtr->BaseAddress + XIN_IVAR_OFFSET +
(Id * 4), CfgPtr->IntVectorAddr);
}
/* Enable the Interrupt if it was enabled before calling this
* function
*/
if (CurrentIER & Mask) {
XIntc_Enable(InstancePtr, Id);
}
}
else {
/* Get the Enabled Interrupts */
CurrentIER = XIntc_In32(InstancePtr->BaseAddress + XIN_IER_OFFSET);
Mask = XIntc_BitPosMask[Id];/* Convert from integer id to bit mask */
/* Disable the Interrupt if it was enabled before
* calling this function
*/
if (CurrentIER & Mask) {
XIntc_Disable(InstancePtr, Id);
}
/*
* Disable the selected interrupt as Fast Interrupt by reading the
* interrupt mode register and then modifying only the
* specified interrupt id
*/
Imr = XIntc_In32(InstancePtr->BaseAddress + XIN_IMR_OFFSET);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IMR_OFFSET,
Imr & ~Mask);
if (InstancePtr->CfgPtr->IntVectorAddr == 0x0) {
XIntc_Out32(InstancePtr->BaseAddress + XIN_IVAR_OFFSET +
(Id * 4), 0x10);
} else {
XIntc_Out32(InstancePtr->BaseAddress + XIN_IVAR_OFFSET +
(Id * 4), InstancePtr->CfgPtr->IntVectorAddr);
}
/* Enable the Interrupt if it was enabled before
* calling this function
*/
if (CurrentIER & Mask) {
XIntc_Enable(InstancePtr, Id);
}
}
}
/**
*
* Initializes Slave controllers in Cascade mode. The initialization entails:
* - Initial vector table with stub function calls
* - All interrupt sources are disabled for last controller.
* - All interrupt sources are disabled except sources to 31 pin of
* primary and secondary controllers
* - Interrupt outputs are disabled
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
*
* @return None
*
* @note None.
*
******************************************************************************/
static void XIntc_InitializeSlaves(XIntc * InstancePtr)
{
int Index;
u32 Mask;
XIntc_Config *CfgPtr;
int Id;
Mask = XIntc_BitPosMask[31]; /* Convert from integer id to bit mask */
/* Enable interrupt id with 31 for Master
* interrupt controller
*/
XIntc_Out32(InstancePtr->CfgPtr->BaseAddress + XIN_IER_OFFSET, Mask);
for (Index = 1; Index <= XPAR_XINTC_NUM_INSTANCES - 1; Index++) {
CfgPtr = XIntc_LookupConfig(Index);
XIntc_Out32(CfgPtr->BaseAddress + XIN_IAR_OFFSET,
0xFFFFFFFF);
if (CfgPtr->IntcType != XIN_INTC_LAST) {
/* Enable interrupt ids with 31 for secondary
* interrupt controllers
*/
XIntc_Out32(CfgPtr->BaseAddress + XIN_IER_OFFSET,
Mask);
} else {
XIntc_Out32(CfgPtr->BaseAddress + XIN_IER_OFFSET, 0x0);
}
/* Disable Interrupt output */
XIntc_Out32(CfgPtr->BaseAddress + XIN_MER_OFFSET, 0);
/* Set all interrupts as normal mode if Fast Interrupts
* are enabled
*/
if(CfgPtr->FastIntr == TRUE) {
XIntc_Out32(CfgPtr->BaseAddress + XIN_IMR_OFFSET, 0);
}
/*
* Initialize all the data needed to perform interrupt
* processing for each interrupt ID up to the maximum used
*/
for (Id = 0; Id < CfgPtr->NumberofIntrs; Id++) {
/*
* Initalize the handler to point to a stub to handle an
* interrupt which has not been connected to a handler.
* Only initialize it if the handler is 0 or
* XNullHandler, which means it was not initialized
* statically by the tools/user.Set the callback
* reference to this instance so that unhandled
* interrupts can be tracked.
*/
if ((CfgPtr->HandlerTable[Id].Handler == 0) ||
(CfgPtr->HandlerTable[Id].Handler ==
XNullHandler)) {
CfgPtr->HandlerTable[Id].Handler = StubHandler;
}
CfgPtr->HandlerTable[Id].CallBackRef = InstancePtr;
}
}
}
/**
*
* Makes the connection between the Id of the interrupt source and the
* associated handler that is to run when the interrupt is recognized.In Cascade
* mode, connects handler to corresponding Slave controller IVAR register
* depending on the Id and sets all interrupt sources of the Slave controller as
* fast interrupts.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id contains the ID of the interrupt source and should be in the
* range of 0 to XPAR_INTC_MAX_NUM_INTR_INPUTS - 1 with 0 being
* the highest priority interrupt.
* @param Handler to the handler for that interrupt.
*
* @return
* - XST_SUCCESS
*
* @note
* Slave controllers in Cascade Mode should have all as Fast
* interrupts or Normal interrupts, mixed interrupts are not
* supported
*
* WARNING: The handler provided as an argument will overwrite any handler
* that was previously connected.
*
****************************************************************************/
int XIntc_ConnectFastHandler(XIntc *InstancePtr, u8 Id,
XFastInterruptHandler Handler)
{
u32 Imr;
u32 CurrentIER;
u32 Mask;
XIntc_Config *CfgPtr;
/*
* Assert the arguments
*/
Xil_AssertNonvoid(InstancePtr != NULL);
Xil_AssertNonvoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
Xil_AssertNonvoid(Handler != NULL);
Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
Xil_AssertNonvoid(InstancePtr->CfgPtr->FastIntr == TRUE);
if (Id > 31) {
/* Enable user required Id in Slave controller */
CfgPtr = XIntc_LookupConfig(Id/32);
if (CfgPtr->FastIntr != TRUE) {
/*Fast interrupts of slave controller are not enabled*/
return XST_FAILURE;
}
/* Get the Enabled Interrupts */
CurrentIER = XIntc_In32(CfgPtr->BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[(Id%32)];
/* Disable the Interrupt if it was enabled before calling
* this function
*/
if (CurrentIER & Mask) {
XIntc_Disable(InstancePtr, Id);
}
XIntc_Out32(CfgPtr->BaseAddress + XIN_IVAR_OFFSET +
((Id%32) * 4), (u32) Handler);
/* Slave controllers in Cascade Mode should have all as Fast
* interrupts or Normal interrupts, mixed interrupts are not
* supported
*/
XIntc_Out32(CfgPtr->BaseAddress + XIN_IMR_OFFSET, 0xFFFFFFFF);
/* Enable the Interrupt if it was enabled before calling this
* function
*/
if (CurrentIER & Mask) {
XIntc_Enable(InstancePtr, Id);
}
}
else {
/* Get the Enabled Interrupts */
CurrentIER = XIntc_In32(InstancePtr->BaseAddress +
XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[Id];
/* Disable the Interrupt if it was enabled before calling
* this function
*/
if (CurrentIER & Mask) {
XIntc_Disable(InstancePtr, Id);
}
XIntc_Out32(InstancePtr->BaseAddress + XIN_IVAR_OFFSET +
(Id * 4), (u32) Handler);
Imr = XIntc_In32(InstancePtr->BaseAddress + XIN_IMR_OFFSET);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IMR_OFFSET,
Imr | Mask);
/* Enable the Interrupt if it was enabled before
* calling this function
*/
if (CurrentIER & Mask) {
XIntc_Enable(InstancePtr, Id);
}
}
return XST_SUCCESS;
}
/**
*
* Register a fast handler function for a specific interrupt ID. The handler
* function will be called when an interrupt occurs for the given interrupt ID.
* In Cascade mode Interrupt Id is used to set Handler for corresponding Slave
* Controller
*
* @param BaseAddress is the base address of the interrupt controller
* whose vector table will be modified.
* @param InterruptId is the interrupt ID to be associated with the input
* handler.
* @param FastHandler is the function pointer that will be called when
* interrupt occurs
*
* @return None.
*
* @note
*
* Note that this function has no effect if the input base address is invalid.
*
******************************************************************************/
void XIntc_RegisterFastHandler(u32 BaseAddress, u8 Id,
XFastInterruptHandler FastHandler)
{
u32 CurrentIER;
u32 Mask;
u32 Imr;
XIntc_Config *CfgPtr;
if (Id > 31) {
/* Enable user required Id in Slave controller */
CfgPtr = XIntc_LookupConfig(Id/32);
/* Get the Enabled Interrupts */
CurrentIER = XIntc_In32(CfgPtr->BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[(Id%32)];
/* Disable the Interrupt if it was enabled before calling
* this function
*/
if (CurrentIER & Mask) {
XIntc_Out32(CfgPtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER & ~Mask));
}
XIntc_Out32(CfgPtr->BaseAddress + XIN_IVAR_OFFSET +
((Id%32) * 4), (u32) FastHandler);
/* Slave controllers in Cascade Mode should have all as Fast
* interrupts or Normal interrupts, mixed interrupts are not
* supported
*/
XIntc_Out32(CfgPtr->BaseAddress + XIN_IMR_OFFSET, 0xFFFFFFFF);
/* Enable the Interrupt if it was enabled before calling this
* function
*/
if (CurrentIER & Mask) {
XIntc_Out32(CfgPtr->BaseAddress + XIN_IER_OFFSET,
(CurrentIER | Mask));
}
}
else {
CurrentIER = XIntc_In32(BaseAddress + XIN_IER_OFFSET);
/* Convert from integer id to bit mask */
Mask = XIntc_BitPosMask[Id];
if (CurrentIER & Mask) {
/* Disable Interrupt if it was enabled */
CurrentIER = XIntc_In32(BaseAddress + XIN_IER_OFFSET);
XIntc_Out32(BaseAddress + XIN_IER_OFFSET,
(CurrentIER & ~Mask));
}
XIntc_Out32(BaseAddress + XIN_IVAR_OFFSET + (Id * 4),
(u32) FastHandler);
Imr = XIntc_In32(BaseAddress + XIN_IMR_OFFSET);
XIntc_Out32(BaseAddress + XIN_IMR_OFFSET, Imr | Mask);
/* Enable Interrupt if it was enabled before calling
* this function
*/
if (CurrentIER & Mask) {
CurrentIER = XIntc_In32(BaseAddress + XIN_IER_OFFSET);
XIntc_Out32(BaseAddress + XIN_IER_OFFSET,
(CurrentIER | Mask));
}
}
}
/**
*
* Run a self-test on the driver/device. This is a destructive test.
*
* This involves forcing interrupts into the controller and verifying that they
* are recognized and can be acknowledged. This test will not succeed if the
* interrupt controller has been started in real mode such that interrupts
* cannot be forced.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
*
* @return
* - XST_SUCCESS if self-test is successful.
* - XST_INTC_FAIL_SELFTEST if the Interrupt controller fails the
* self-test. It will fail the self test if the device has
* previously been started in real mode.
*
* @note None.
*
******************************************************************************/
int XIntc_SelfTest(XIntc * InstancePtr)
{
u32 CurrentISR;
u32 Temp;
/*
* Assert the arguments
*/
Xil_AssertNonvoid(InstancePtr != NULL);
Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
/*
* Acknowledge all pending interrupts by reading the interrupt status
* register and writing the value to the acknowledge register
*/
Temp = XIntc_In32(InstancePtr->BaseAddress + XIN_ISR_OFFSET);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IAR_OFFSET, Temp);
/*
* Verify that there are no interrupts by reading the interrupt status
*/
CurrentISR = XIntc_In32(InstancePtr->BaseAddress + XIN_ISR_OFFSET);
/*
* ISR should be zero after all interrupts are acknowledged
*/
if (CurrentISR != 0) {
return XST_INTC_FAIL_SELFTEST;
}
/*
* Set a bit in the ISR which simulates an interrupt
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_ISR_OFFSET, XIN_TEST_MASK);
/*
* Verify that it was set
*/
CurrentISR = XIntc_In32(InstancePtr->BaseAddress + XIN_ISR_OFFSET);
if (CurrentISR != XIN_TEST_MASK) {
return XST_INTC_FAIL_SELFTEST;
}
/*
* Acknowledge the interrupt
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_IAR_OFFSET, XIN_TEST_MASK);
/*
* Read back the ISR to verify that the interrupt is gone
*/
CurrentISR = XIntc_In32(InstancePtr->BaseAddress + XIN_ISR_OFFSET);
if (CurrentISR != 0) {
return XST_INTC_FAIL_SELFTEST;
}
return XST_SUCCESS;
}
/**
*
* Allows software to simulate an interrupt in the interrupt controller. This
* function will only be successful when the interrupt controller has been
* started in simulation mode. Once it has been started in real mode,
* interrupts cannot be simulated. A simulated interrupt allows the interrupt
* controller to be tested without any device to drive an interrupt input
* signal into it. In Cascade mode writes to ISR of appropraite Slave
* controller depending on Id.
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param Id is the interrupt ID for which to simulate an interrupt.
*
* @return
* - XST_SUCCESS if successful
* - XST_FAILURE if the interrupt could not be
* simulated because the interrupt controller is or
* has previously been in real mode.
*
* @note None.
*
******************************************************************************/
int XIntc_SimulateIntr(XIntc * InstancePtr, u8 Id)
{
u32 Mask;
u32 MasterEnable;
XIntc_Config *CfgPtr;
int Index;
int DeviceId;
/*
* Assert the arguments
*/
Xil_AssertNonvoid(InstancePtr != NULL);
Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);
Xil_AssertNonvoid(Id < XPAR_INTC_MAX_NUM_INTR_INPUTS);
/* Get the contents of the master enable register and determine if
* hardware interrupts have already been enabled, if so, this is a write
* once bit such that simulation can't be done at this point because
* the ISR register is no longer writable by software
*/
MasterEnable = XIntc_In32(InstancePtr->BaseAddress + XIN_MER_OFFSET);
if (MasterEnable & XIN_INT_HARDWARE_ENABLE_MASK) {
return XST_FAILURE;
}
if (Id > 31) {
DeviceId = Id/32;
CfgPtr = XIntc_LookupConfig(Id/32);
Mask = XIntc_BitPosMask[Id%32];
XIntc_Out32(CfgPtr->BaseAddress + XIN_ISR_OFFSET, Mask);
/* Generate interrupt for 31 by writing to Interrupt Status
* register of parent controllers. Primary controller ISR
* will be written last in the loop
*/
Mask = XIntc_BitPosMask[31];
for (Index = DeviceId - 1; Index >= 0; Index--)
{
CfgPtr = XIntc_LookupConfig(Index);
XIntc_Out32(CfgPtr->BaseAddress + XIN_ISR_OFFSET,
Mask);
}
}
else {
/*
* The Id is used to create the appropriate mask for the
* desired bit position.
*/
Mask = XIntc_BitPosMask[Id];
/*
* Enable the selected interrupt source by reading the interrupt
* enable register and then modifying only the specified
* interrupt id enable
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_ISR_OFFSET, Mask);
}
/* indicate the interrupt was successfully simulated */
return XST_SUCCESS;
}
/**
*
* Initialize a specific interrupt controller instance/driver. The
* initialization entails:
*
* - Initialize fields of the XIntc structure
* - Initial vector table with stub function calls
* - All interrupt sources are disabled
* - Interrupt output is disabled
*
* @param InstancePtr is a pointer to the XIntc instance to be worked on.
* @param DeviceId is the unique id of the device controlled by this XIntc
* instance. Passing in a device id associates the generic XIntc
* instance to a specific device, as chosen by the caller or
* application developer.
*
* @return
* - XST_SUCCESS if initialization was successful
* - XST_DEVICE_IS_STARTED if the device has already been started
* - XST_DEVICE_NOT_FOUND if device configuration information was
* not found for a device with the supplied device ID.
*
* @note In Cascade mode this function calls XIntc_InitializeSlaves to
* initialiaze Slave Interrupt controllers.
*
******************************************************************************/
int XIntc_Initialize(XIntc * InstancePtr, u16 DeviceId)
{
u8 Id;
XIntc_Config *CfgPtr;
u32 NextBitMask = 1;
Xil_AssertNonvoid(InstancePtr != NULL);
/*
* If the device is started, disallow the initialize and return a status
* indicating it is started. This allows the user to stop the device
* and reinitialize, but prevents a user from inadvertently initializing
*/
if (InstancePtr->IsStarted == XIL_COMPONENT_IS_STARTED) {
return XST_DEVICE_IS_STARTED;
}
/*
* Lookup the device configuration in the CROM table. Use this
* configuration info down below when initializing this component.
*/
CfgPtr = XIntc_LookupConfig(DeviceId);
if (CfgPtr == NULL) {
return XST_DEVICE_NOT_FOUND;
}
/*
* Set some default values
*/
InstancePtr->IsReady = 0;
InstancePtr->IsStarted = 0; /* not started */
InstancePtr->CfgPtr = CfgPtr;
InstancePtr->CfgPtr->Options = XIN_SVC_SGL_ISR_OPTION;
InstancePtr->CfgPtr->IntcType = CfgPtr->IntcType;
/*
* Save the base address pointer such that the registers of the
* interrupt can be accessed
*/
#if (XPAR_XINTC_USE_DCR_BRIDGE != 0)
InstancePtr->BaseAddress = ((CfgPtr->BaseAddress >> 2)) & 0xFFF;
#else
InstancePtr->BaseAddress = CfgPtr->BaseAddress;
#endif
/*
* Initialize all the data needed to perform interrupt processing for
* each interrupt ID up to the maximum used
*/
for (Id = 0; Id < CfgPtr->NumberofIntrs; Id++) {
/*
* Initalize the handler to point to a stub to handle an
* interrupt which has not been connected to a handler. Only
* initialize it if the handler is 0 or XNullHandler, which
* means it was not initialized statically by the tools/user.
* Set the callback reference to this instance so that
* unhandled interrupts can be tracked.
*/
if ((InstancePtr->CfgPtr->HandlerTable[Id].Handler == 0) ||
(InstancePtr->CfgPtr->HandlerTable[Id].Handler ==
XNullHandler)) {
InstancePtr->CfgPtr->HandlerTable[Id].Handler =
StubHandler;
}
InstancePtr->CfgPtr->HandlerTable[Id].CallBackRef = InstancePtr;
/*
* Initialize the bit position mask table such that bit
* positions are lookups only for each interrupt id, with 0
* being a special case
* (XIntc_BitPosMask[] = { 1, 2, 4, 8, ... })
*/
XIntc_BitPosMask[Id] = NextBitMask;
NextBitMask *= 2;
}
/*
* Disable IRQ output signal
* Disable all interrupt sources
* Acknowledge all sources
*/
XIntc_Out32(InstancePtr->BaseAddress + XIN_MER_OFFSET, 0);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IER_OFFSET, 0);
XIntc_Out32(InstancePtr->BaseAddress + XIN_IAR_OFFSET, 0xFFFFFFFF);
/*
* If the fast Interrupt mode is enabled then set all the
* interrupts as normal mode.
*/
if(InstancePtr->CfgPtr->FastIntr == TRUE) {
XIntc_Out32(InstancePtr->BaseAddress + XIN_IMR_OFFSET, 0);
}
/* Initialize slaves in Cascade mode*/
if (InstancePtr->CfgPtr->IntcType != XIN_INTC_NOCASCADE) {
XIntc_InitializeSlaves(InstancePtr);
}
/*
* Indicate the instance is now ready to use, successfully initialized
*/
InstancePtr->IsReady = XIL_COMPONENT_IS_READY;
return XST_SUCCESS;
}
