NTSTATUS cli_nt_setup_netsec(struct cli_state *cli, int sec_chan, int auth_flags,
const uchar trust_password[16])
{
NTSTATUS result;
uint32 neg_flags = NETLOGON_NEG_AUTH2_FLAGS;
cli->pipe_auth_flags = 0;
if (lp_client_schannel() == False) {
return NT_STATUS_OK;
}
if (!cli_nt_session_open(cli, PI_NETLOGON)) {
DEBUG(0, ("Could not initialise %s\n",
get_pipe_name_from_index(PI_NETLOGON)));
return NT_STATUS_UNSUCCESSFUL;
}
if (lp_client_schannel() != False)
neg_flags |= NETLOGON_NEG_SCHANNEL;
neg_flags |= NETLOGON_NEG_SCHANNEL;
result = cli_nt_setup_creds(cli, sec_chan, trust_password,
&neg_flags, 2);
if (!(neg_flags & NETLOGON_NEG_SCHANNEL)
&& lp_client_schannel() == True) {
DEBUG(1, ("Could not negotiate SCHANNEL with the DC!\n"));
result = NT_STATUS_UNSUCCESSFUL;
}
if (!NT_STATUS_IS_OK(result)) {
ZERO_STRUCT(cli->auth_info.sess_key);
ZERO_STRUCT(cli->sess_key);
cli->pipe_auth_flags = 0;
cli_nt_session_close(cli);
return result;
}
memcpy(cli->auth_info.sess_key, cli->sess_key,
sizeof(cli->auth_info.sess_key));
cli->saved_netlogon_pipe_fnum = cli->nt_pipe_fnum;
cli->nt_pipe_fnum = 0;
/* doing schannel, not per-user auth */
cli->pipe_auth_flags = auth_flags;
return NT_STATUS_OK;
}
/**
* confirm that a domain join is still valid
*
* @return A shell status integer (0 for success)
*
**/
static int net_rpc_join_ok(const char *domain)
{
struct cli_state *cli;
uchar stored_md4_trust_password[16];
int retval = 1;
uint32 channel;
NTSTATUS result;
/* Connect to remote machine */
if (!(cli = net_make_ipc_connection(NET_FLAGS_ANONYMOUS | NET_FLAGS_PDC))) {
return 1;
}
if (!cli_nt_session_open(cli, PI_NETLOGON)) {
DEBUG(0,("Error connecting to NETLOGON pipe\n"));
goto done;
}
if (!secrets_fetch_trust_account_password(domain,
stored_md4_trust_password,
NULL, &channel)) {
DEBUG(0,("Could not retreive domain trust secret"));
goto done;
}
/* ensure that schannel uses the right domain */
fstrcpy(cli->domain, domain);
if (! NT_STATUS_IS_OK(result = cli_nt_establish_netlogon(cli, channel, stored_md4_trust_password))) {
DEBUG(0,("Error in domain join verfication (fresh connection)\n"));
goto done;
}
retval = 0; /* Success! */
done:
/* Close down pipe - this will clean up open policy handles */
if (cli->nt_pipe_fnum[cli->pipe_idx])
cli_nt_session_close(cli);
cli_shutdown(cli);
return retval;
}
int net_rpc_join_newstyle(int argc, const char **argv)
{
/* libsmb variables */
struct cli_state *cli;
TALLOC_CTX *mem_ctx;
uint32 acb_info = ACB_WSTRUST;
uint32 sec_channel_type;
/* rpc variables */
POLICY_HND lsa_pol, sam_pol, domain_pol, user_pol;
DOM_SID *domain_sid;
uint32 user_rid;
/* Password stuff */
char *clear_trust_password = NULL;
uchar pwbuf[516];
SAM_USERINFO_CTR ctr;
SAM_USER_INFO_24 p24;
SAM_USER_INFO_10 p10;
uchar md4_trust_password[16];
/* Misc */
NTSTATUS result;
int retval = 1;
char *domain;
uint32 num_rids, *name_types, *user_rids;
uint32 flags = 0x3e8;
char *acct_name;
const char *const_acct_name;
/* check what type of join */
if (argc >= 0) {
sec_channel_type = get_sec_channel_type(argv[0]);
} else {
sec_channel_type = get_sec_channel_type(NULL);
}
switch (sec_channel_type) {
case SEC_CHAN_WKSTA:
acb_info = ACB_WSTRUST;
break;
case SEC_CHAN_BDC:
acb_info = ACB_SVRTRUST;
break;
#if 0
case SEC_CHAN_DOMAIN:
acb_info = ACB_DOMTRUST;
break;
#endif
}
/* Connect to remote machine */
if (!(cli = net_make_ipc_connection(NET_FLAGS_PDC)))
return 1;
if (!(mem_ctx = talloc_init("net_rpc_join_newstyle"))) {
DEBUG(0, ("Could not initialise talloc context\n"));
goto done;
}
/* Fetch domain sid */
if (!cli_nt_session_open(cli, PI_LSARPC)) {
DEBUG(0, ("Error connecting to LSA pipe\n"));
goto done;
}
CHECK_RPC_ERR(cli_lsa_open_policy(cli, mem_ctx, True,
SEC_RIGHTS_MAXIMUM_ALLOWED,
&lsa_pol),
"error opening lsa policy handle");
CHECK_RPC_ERR(cli_lsa_query_info_policy(cli, mem_ctx, &lsa_pol,
5, &domain, &domain_sid),
"error querying info policy");
cli_lsa_close(cli, mem_ctx, &lsa_pol);
cli_nt_session_close(cli); /* Done with this pipe */
/* Create domain user */
if (!cli_nt_session_open(cli, PI_SAMR)) {
DEBUG(0, ("Error connecting to SAM pipe\n"));
goto done;
}
CHECK_RPC_ERR(cli_samr_connect(cli, mem_ctx,
SEC_RIGHTS_MAXIMUM_ALLOWED,
&sam_pol),
"could not connect to SAM database");
CHECK_RPC_ERR(cli_samr_open_domain(cli, mem_ctx, &sam_pol,
SEC_RIGHTS_MAXIMUM_ALLOWED,
domain_sid, &domain_pol),
"could not open domain");
/* Create domain user */
acct_name = talloc_asprintf(mem_ctx, "%s$", global_myname());
strlower_m(acct_name);
const_acct_name = acct_name;
result = cli_samr_create_dom_user(cli, mem_ctx, &domain_pol,
acct_name, acb_info,
0xe005000b, &user_pol,
&user_rid);
if (!NT_STATUS_IS_OK(result) &&
!NT_STATUS_EQUAL(result, NT_STATUS_USER_EXISTS)) {
d_printf("Creation of workstation account failed\n");
/* If NT_STATUS_ACCESS_DENIED then we have a valid
username/password combo but the user does not have
administrator access. */
if (NT_STATUS_V(result) == NT_STATUS_V(NT_STATUS_ACCESS_DENIED))
d_printf("User specified does not have administrator privileges\n");
goto done;
}
/* We *must* do this.... don't ask... */
if (NT_STATUS_IS_OK(result))
cli_samr_close(cli, mem_ctx, &user_pol);
CHECK_RPC_ERR_DEBUG(cli_samr_lookup_names(cli, mem_ctx,
&domain_pol, flags,
1, &const_acct_name,
&num_rids,
&user_rids, &name_types),
("error looking up rid for user %s: %s\n",
acct_name, nt_errstr(result)));
if (name_types[0] != SID_NAME_USER) {
DEBUG(0, ("%s is not a user account (type=%d)\n", acct_name, name_types[0]));
goto done;
}
user_rid = user_rids[0];
/* Open handle on user */
CHECK_RPC_ERR_DEBUG(
cli_samr_open_user(cli, mem_ctx, &domain_pol,
SEC_RIGHTS_MAXIMUM_ALLOWED,
user_rid, &user_pol),
("could not re-open existing user %s: %s\n",
acct_name, nt_errstr(result)));
/* Create a random machine account password */
{
char *str;
str = generate_random_str(DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH);
clear_trust_password = SMB_STRDUP(str);
E_md4hash(clear_trust_password, md4_trust_password);
}
encode_pw_buffer(pwbuf, clear_trust_password, STR_UNICODE);
/* Set password on machine account */
ZERO_STRUCT(ctr);
ZERO_STRUCT(p24);
init_sam_user_info24(&p24, (char *)pwbuf,24);
ctr.switch_value = 24;
ctr.info.id24 = &p24;
CHECK_RPC_ERR(cli_samr_set_userinfo(cli, mem_ctx, &user_pol, 24,
&cli->user_session_key, &ctr),
"error setting trust account password");
/* Why do we have to try to (re-)set the ACB to be the same as what
we passed in the samr_create_dom_user() call? When a NT
workstation is joined to a domain by an administrator the
acb_info is set to 0x80. For a normal user with "Add
workstations to the domain" rights the acb_info is 0x84. I'm
not sure whether it is supposed to make a difference or not. NT
seems to cope with either value so don't bomb out if the set
userinfo2 level 0x10 fails. -tpot */
ZERO_STRUCT(ctr);
ctr.switch_value = 0x10;
ctr.info.id10 = &p10;
init_sam_user_info10(&p10, acb_info);
/* Ignoring the return value is necessary for joining a domain
as a normal user with "Add workstation to domain" privilege. */
result = cli_samr_set_userinfo2(cli, mem_ctx, &user_pol, 0x10,
&cli->user_session_key, &ctr);
/* Now check the whole process from top-to-bottom */
cli_samr_close(cli, mem_ctx, &user_pol);
cli_nt_session_close(cli); /* Done with this pipe */
if (!cli_nt_session_open(cli, PI_NETLOGON)) {
DEBUG(0,("Error connecting to NETLOGON pipe\n"));
goto done;
}
/* ensure that schannel uses the right domain */
fstrcpy(cli->domain, domain);
result = cli_nt_establish_netlogon(cli, sec_channel_type,
md4_trust_password);
if (!NT_STATUS_IS_OK(result)) {
DEBUG(0, ("Error domain join verification (reused connection): %s\n\n",
nt_errstr(result)));
if ( NT_STATUS_EQUAL(result, NT_STATUS_ACCESS_DENIED) &&
(sec_channel_type == SEC_CHAN_BDC) ) {
d_printf("Please make sure that no computer account\n"
"named like this machine (%s) exists in the domain\n",
global_myname());
}
goto done;
}
/* Now store the secret in the secrets database */
strupper_m(domain);
if (!secrets_store_domain_sid(domain, domain_sid)) {
DEBUG(0, ("error storing domain sid for %s\n", domain));
goto done;
}
if (!secrets_store_machine_password(clear_trust_password, domain, sec_channel_type)) {
DEBUG(0, ("error storing plaintext domain secrets for %s\n", domain));
}
/* double-check, connection from scratch */
retval = net_rpc_join_ok(domain);
done:
/* Close down pipe - this will clean up open policy handles */
if (cli->nt_pipe_fnum[cli->pipe_idx])
cli_nt_session_close(cli);
/* Display success or failure */
if (retval != 0) {
fprintf(stderr,"Unable to join domain %s.\n",domain);
} else {
printf("Joined domain %s.\n",domain);
}
cli_shutdown(cli);
SAFE_FREE(clear_trust_password);
return retval;
}
NTSTATUS change_trust_account_password( const char *domain, const char *remote_machine)
{
NTSTATUS nt_status = NT_STATUS_UNSUCCESSFUL;
struct in_addr pdc_ip;
fstring dc_name;
struct cli_state *cli;
DEBUG(5,("change_trust_account_password: Attempting to change trust account password in domain %s....\n",
domain));
if (remote_machine == NULL || !strcmp(remote_machine, "*")) {
/* Use the PDC *only* for this */
if ( !get_pdc_ip(domain, &pdc_ip) ) {
DEBUG(0,("Can't get IP for PDC for domain %s\n", domain));
goto failed;
}
if ( !name_status_find( domain, 0x1b, 0x20, pdc_ip, dc_name) )
goto failed;
} else {
/* supoport old deprecated "smbpasswd -j DOMAIN -r MACHINE" behavior */
fstrcpy( dc_name, remote_machine );
}
/* if this next call fails, then give up. We can't do
password changes on BDC's --jerry */
if (!NT_STATUS_IS_OK(cli_full_connection(&cli, global_myname(), dc_name,
NULL, 0,
"IPC$", "IPC",
"", "",
"", 0, Undefined, NULL))) {
DEBUG(0,("modify_trust_password: Connection to %s failed!\n", dc_name));
nt_status = NT_STATUS_UNSUCCESSFUL;
goto failed;
}
/*
* Ok - we have an anonymous connection to the IPC$ share.
* Now start the NT Domain stuff :-).
*/
if(cli_nt_session_open(cli, PI_NETLOGON) == False) {
DEBUG(0,("modify_trust_password: unable to open the domain client session to machine %s. Error was : %s.\n",
dc_name, cli_errstr(cli)));
cli_nt_session_close(cli);
cli_ulogoff(cli);
cli_shutdown(cli);
nt_status = NT_STATUS_UNSUCCESSFUL;
goto failed;
}
nt_status = trust_pw_find_change_and_store_it(cli, cli->mem_ctx, domain);
cli_nt_session_close(cli);
cli_ulogoff(cli);
cli_shutdown(cli);
failed:
if (!NT_STATUS_IS_OK(nt_status)) {
DEBUG(0,("%s : change_trust_account_password: Failed to change password for domain %s.\n",
timestring(False), domain));
}
else
DEBUG(5,("change_trust_account_password: sucess!\n"));
return nt_status;
}
NTSTATUS cli_nt_establish_netlogon(struct cli_state *cli, int sec_chan,
const uchar trust_password[16])
{
NTSTATUS result;
uint32 neg_flags = NETLOGON_NEG_AUTH2_FLAGS;
int fnum;
cli_nt_netlogon_netsec_session_close(cli);
if (lp_client_schannel() != False)
neg_flags |= NETLOGON_NEG_SCHANNEL;
result = cli_nt_setup_creds(cli, sec_chan, trust_password,
&neg_flags, 2);
if (!NT_STATUS_IS_OK(result)) {
cli_nt_session_close(cli);
return result;
}
if ((lp_client_schannel() == True) &&
((neg_flags & NETLOGON_NEG_SCHANNEL) == 0)) {
DEBUG(3, ("Server did not offer schannel\n"));
cli_nt_session_close(cli);
return NT_STATUS_UNSUCCESSFUL;
}
if ((lp_client_schannel() == False) ||
((neg_flags & NETLOGON_NEG_SCHANNEL) == 0)) {
return NT_STATUS_OK;
/* keep the existing connection to NETLOGON open */
}
/* Server offered schannel, so try it. */
memcpy(cli->auth_info.sess_key, cli->sess_key,
sizeof(cli->auth_info.sess_key));
cli->saved_netlogon_pipe_fnum = cli->nt_pipe_fnum;
cli->pipe_auth_flags = AUTH_PIPE_NETSEC;
cli->pipe_auth_flags |= AUTH_PIPE_SIGN;
cli->pipe_auth_flags |= AUTH_PIPE_SEAL;
if (cli->capabilities & CAP_NT_SMBS) {
/* The secure channel connection must be opened on the same
session (TCP connection) as the one the challenge was
requested from. */
if ((fnum = cli_nt_create(cli, PIPE_NETLOGON_PLAIN,
DESIRED_ACCESS_PIPE)) == -1) {
DEBUG(0,("cli_nt_create failed to %s machine %s. "
"Error was %s\n",
PIPE_NETLOGON, cli->desthost,
cli_errstr(cli)));
return NT_STATUS_UNSUCCESSFUL;
}
cli->nt_pipe_fnum = (uint16)fnum;
} else {
if ((fnum = cli_open(cli, PIPE_NETLOGON,
O_CREAT|O_RDWR, DENY_NONE)) == -1) {
DEBUG(0,("cli_open failed on pipe %s to machine %s. "
"Error was %s\n",
PIPE_NETLOGON, cli->desthost,
cli_errstr(cli)));
return NT_STATUS_UNSUCCESSFUL;
}
cli->nt_pipe_fnum = (uint16)fnum;
/**************** Set Named Pipe State ***************/
if (!rpc_pipe_set_hnd_state(cli, PIPE_NETLOGON, 0x4300)) {
DEBUG(0,("Pipe hnd state failed. Error was %s\n",
cli_errstr(cli)));
cli_close(cli, cli->nt_pipe_fnum);
return NT_STATUS_UNSUCCESSFUL;
}
}
if (!rpc_pipe_bind(cli, PI_NETLOGON, global_myname())) {
DEBUG(2,("rpc bind to %s failed\n", PIPE_NETLOGON));
cli_close(cli, cli->nt_pipe_fnum);
return NT_STATUS_UNSUCCESSFUL;
}
return NT_STATUS_OK;
}
static int join_domain_byuser(char *domain, const char *remote,
char *username, char *password)
{
/* libsmb variables */
pstring pdc_name;
struct nmb_name calling, called;
struct ntuser_creds creds;
struct cli_state cli;
fstring acct_name;
struct in_addr dest_ip;
TALLOC_CTX *mem_ctx;
/* rpc variables */
POLICY_HND lsa_pol, sam_pol, domain_pol, user_pol;
DOM_SID domain_sid;
uint32 user_rid;
/* Password stuff */
char *machine_pwd;
int plen = 0;
uchar pwbuf[516], ntpw[16], sess_key[16];
SAM_USERINFO_CTR ctr;
SAM_USER_INFO_24 p24;
SAM_USER_INFO_10 p10;
/* Misc */
NTSTATUS result;
int retval = 1;
pstrcpy(pdc_name, remote ? remote : "");
/* Connect to remote machine */
ZERO_STRUCT(cli);
ZERO_STRUCT(creds);
ZERO_STRUCT(dest_ip); /* Make sure no nasty surprises */
if (!(mem_ctx = talloc_init())) {
DEBUG(0, ("Could not initialise talloc context\n"));
goto done;
}
if (!cli_initialise(&cli)) {
DEBUG(0, ("Could not initialise client structure\n"));
goto done;
}
init_rpcclient_creds(&creds, username, domain, password);
cli_init_creds(&cli, &creds);
/*
* If we are given a remote machine assume this is the PDC.
*/
if(remote == NULL || !strcmp(remote, "*")) {
struct in_addr *ip_list;
int addr_count;
if (!get_dc_list(True /* PDC only*/, domain, &ip_list, &addr_count)) {
fprintf(stderr, "Unable to find the domain controller for domain %s.\n", domain);
return 1;
}
if ((addr_count < 1) || (is_zero_ip(ip_list[0]))) {
fprintf(stderr, "Incorrect entries returned when finding the domain controller for domain %s.\n", domain);
return 1;
}
if (!lookup_dc_name(global_myname, domain, &ip_list[0], pdc_name)) {
fprintf(stderr, "Unable to lookup the name for the domain controller for domain %s.\n", domain);
return 1;
}
dest_ip = ip_list[0];
}
make_nmb_name(&called, pdc_name, 0x20);
make_nmb_name(&calling, dns_to_netbios_name(global_myname), 0);
if (!cli_establish_connection(&cli, pdc_name, &dest_ip, &calling,
&called, "IPC$", "IPC", False, True)) {
if (!NT_STATUS_IS_OK(cli_nt_error(&cli))) {
DEBUG(0, ("Error connecting to %s - %s\n", pdc_name,cli_errstr(&cli)));
} else {
DEBUG(0, ("Error connecting to %s\n", pdc_name));
}
goto done;
}
/* Fetch domain sid */
if (!cli_nt_session_open(&cli, PIPE_LSARPC)) {
DEBUG(0, ("Error connecting to SAM pipe\n"));
goto done;
}
CHECK_RPC_ERR(cli_lsa_open_policy(&cli, mem_ctx, True,
SEC_RIGHTS_MAXIMUM_ALLOWED,
&lsa_pol),
"error opening lsa policy handle");
CHECK_RPC_ERR(cli_lsa_query_info_policy(&cli, mem_ctx, &lsa_pol,
5, domain, &domain_sid),
"error querying info policy");
cli_lsa_close(&cli, mem_ctx, &lsa_pol);
cli_nt_session_close(&cli); /* Done with this pipe */
/* Create domain user */
if (!cli_nt_session_open(&cli, PIPE_SAMR)) {
DEBUG(0, ("Error connecting to SAM pipe\n"));
goto done;
}
CHECK_RPC_ERR(cli_samr_connect(&cli, mem_ctx,
SEC_RIGHTS_MAXIMUM_ALLOWED,
&sam_pol),
"could not connect to SAM database");
CHECK_RPC_ERR(cli_samr_open_domain(&cli, mem_ctx, &sam_pol,
SEC_RIGHTS_MAXIMUM_ALLOWED,
&domain_sid, &domain_pol),
"could not open domain");
/* Create domain user */
fstrcpy(acct_name, global_myname);
fstrcat(acct_name, "$");
strlower(acct_name);
{
uint32 unknown = 0xe005000b;
result = cli_samr_create_dom_user(&cli, mem_ctx, &domain_pol,
acct_name, ACB_WSTRUST,
unknown, &user_pol,
&user_rid);
}
if (NT_STATUS_IS_OK(result)) {
/* We *must* do this.... don't ask... */
CHECK_RPC_ERR_DEBUG(cli_samr_close(&cli, mem_ctx, &user_pol), ("error closing user policy"));
result = NT_STATUS_USER_EXISTS;
}
if (NT_STATUS_V(result) == NT_STATUS_V(NT_STATUS_USER_EXISTS)) {
uint32 num_rids, *name_types, *user_rids;
uint32 flags = 0x3e8;
const char *names;
/* Look up existing rid */
names = (char *)&acct_name[0];
CHECK_RPC_ERR_DEBUG(
cli_samr_lookup_names(&cli, mem_ctx,
&domain_pol, flags,
1, &names, &num_rids,
&user_rids, &name_types),
("error looking up rid for user %s: %s\n",
acct_name, get_nt_error_msg(result)));
if (name_types[0] != SID_NAME_USER) {
DEBUG(0, ("%s is not a user account\n", acct_name));
goto done;
}
user_rid = user_rids[0];
/* Open handle on user */
CHECK_RPC_ERR_DEBUG(
cli_samr_open_user(&cli, mem_ctx, &domain_pol,
SEC_RIGHTS_MAXIMUM_ALLOWED,
user_rid, &user_pol),
("could not re-open existing user %s: %s\n",
acct_name, get_nt_error_msg(result)));
} else if (!NT_STATUS_IS_OK(result)) {
DEBUG(0, ("error creating domain user: %s\n",
get_nt_error_msg(result)));
goto done;
}
/* Create a random machine account password */
{
UNISTR2 upw; /* Unicode password */
upw.buffer = (uint16 *)talloc_zero(mem_ctx, 0xc *
sizeof(uint16));
upw.uni_str_len = 0xc;
upw.uni_max_len = 0xc;
machine_pwd = (char *)upw.buffer;
plen = upw.uni_str_len * 2;
generate_random_buffer((unsigned char *)machine_pwd, plen, True);
encode_pw_buffer((char *)pwbuf, machine_pwd, plen, False);
mdfour( ntpw, (unsigned char *)upw.buffer, plen);
}
/* Set password on machine account */
ZERO_STRUCT(ctr);
ZERO_STRUCT(p24);
init_sam_user_info24(&p24, (char *)pwbuf,24);
ctr.switch_value = 24;
ctr.info.id24 = &p24;
/* I don't think this is quite the right place for this
calculation. It should be moved somewhere where the credentials
are calculated. )-: */
mdfour(sess_key, cli.pwd.smb_nt_pwd, 16);
CHECK_RPC_ERR(cli_samr_set_userinfo(&cli, mem_ctx, &user_pol, 24,
sess_key, &ctr),
"error setting trust account password");
/* Why do we have to try to (re-)set the ACB to be the same as what
we passed in the samr_create_dom_user() call? When a NT
workstation is joined to a domain by an administrator the
acb_info is set to 0x80. For a normal user with "Add
workstations to the domain" rights the acb_info is 0x84. I'm
not sure whether it is supposed to make a difference or not. NT
seems to cope with either value so don't bomb out if the set
userinfo2 level 0x10 fails. -tpot */
ZERO_STRUCT(ctr);
ctr.switch_value = 0x10;
ctr.info.id10 = &p10;
init_sam_user_info10(&p10, ACB_WSTRUST);
/* Ignoring the return value is necessary for joining a domain
as a normal user with "Add workstation to domain" privilege. */
result = cli_samr_set_userinfo2(&cli, mem_ctx, &user_pol, 0x10,
sess_key, &ctr);
/* Now store the secret in the secrets database */
strupper(domain);
if (!secrets_store_domain_sid(domain, &domain_sid) ||
!secrets_store_trust_account_password(domain, ntpw)) {
DEBUG(0, ("error storing domain secrets\n"));
goto done;
}
retval = 0; /* Success! */
done:
/* Close down pipe - this will clean up open policy handles */
if (cli.nt_pipe_fnum)
cli_nt_session_close(&cli);
/* Display success or failure */
if (retval != 0) {
trust_password_delete(domain);
fprintf(stderr,"Unable to join domain %s.\n",domain);
} else {
printf("Joined domain %s.\n",domain);
}
return retval;
}
/****************************************************************************
nt lsa query
****************************************************************************/
void cmd_lsa_query_info(struct client_info *info)
{
fstring srv_name;
BOOL res = True;
fstrcpy(info->dom.level3_dom, "");
fstrcpy(info->dom.level5_dom, "");
ZERO_STRUCT(info->dom.level3_sid);
ZERO_STRUCT(info->dom.level5_sid);
fstrcpy(srv_name, "\\\\");
fstrcat(srv_name, info->myhostname);
strupper(srv_name);
DEBUG(4,("cmd_lsa_query_info: server:%s\n", srv_name));
DEBUG(5, ("cmd_lsa_query_info: smb_cli->fd:%d\n", smb_cli->fd));
/* open LSARPC session. */
res = res ? cli_nt_session_open(smb_cli, PIPE_LSARPC) : False;
/* lookup domain controller; receive a policy handle */
res = res ? do_lsa_open_policy(smb_cli,
srv_name,
&info->dom.lsa_info_pol, False) : False;
/* send client info query, level 3. receive domain name and sid */
res = res ? do_lsa_query_info_pol(smb_cli,
&info->dom.lsa_info_pol, 0x03,
info->dom.level3_dom,
&info->dom.level3_sid) : False;
/* send client info query, level 5. receive domain name and sid */
res = res ? do_lsa_query_info_pol(smb_cli,
&info->dom.lsa_info_pol, 0x05,
info->dom.level5_dom,
&info->dom.level5_sid) : False;
res = res ? do_lsa_close(smb_cli, &info->dom.lsa_info_pol) : False;
/* close the session */
cli_nt_session_close(smb_cli);
if (res)
{
BOOL domain_something = False;
fstring sid;
DEBUG(5,("cmd_lsa_query_info: query succeeded\n"));
fprintf(out_hnd, "LSA Query Info Policy\n");
if (info->dom.level3_dom[0] != 0)
{
sid_to_string(sid, &info->dom.level3_sid);
fprintf(out_hnd, "Domain Member - Domain: %s SID: %s\n",
info->dom.level3_dom, sid);
domain_something = True;
}
if (info->dom.level5_dom[0] != 0)
{
sid_to_string(sid, &info->dom.level5_sid);
fprintf(out_hnd, "Domain Controller - Domain: %s SID: %s\n",
info->dom.level5_dom, sid);
domain_something = True;
}
if (!domain_something)
{
fprintf(out_hnd, "%s is not a Domain Member or Controller\n",
info->dest_host);
}
}
else
{
DEBUG(5,("cmd_lsa_query_info: query failed\n"));
}
}
/****************************************************************************
nt lsa query
****************************************************************************/
void cmd_lsa_lookup_sids(struct client_info *info)
{
fstring temp;
int i;
fstring sid_name;
fstring srv_name;
DOM_SID sid[10];
DOM_SID *sids[10];
int num_sids = 0;
char **names = NULL;
int num_names = 0;
BOOL res = True;
fstrcpy(srv_name, "\\\\");
fstrcat(srv_name, info->myhostname);
strupper(srv_name);
DEBUG(4,("cmd_lsa_lookup_sids: server: %s\n", srv_name));
while (num_sids < 10 && next_token(NULL, temp, NULL, sizeof(temp)))
{
if (strnequal("S-", temp, 2))
{
fstrcpy(sid_name, temp);
}
else
{
sid_to_string(sid_name, &info->dom.level5_sid);
if (sid_name[0] == 0)
{
fprintf(out_hnd, "please use lsaquery first or specify a complete SID\n");
return;
}
fstrcat(sid_name, "-");
fstrcat(sid_name, temp);
}
init_dom_sid(&sid[num_sids], sid_name);
sids[num_sids] = &sid[num_sids];
num_sids++;
}
if (num_sids == 0)
{
fprintf(out_hnd, "lookupsid RID or SID\n");
return;
}
/* open LSARPC session. */
res = res ? cli_nt_session_open(smb_cli, PIPE_LSARPC) : False;
/* lookup domain controller; receive a policy handle */
res = res ? do_lsa_open_policy(smb_cli,
srv_name,
&info->dom.lsa_info_pol, True) : False;
/* send lsa lookup sids call */
res = res ? do_lsa_lookup_sids(smb_cli,
&info->dom.lsa_info_pol,
num_sids, sids,
&names, &num_names) : False;
res = res ? do_lsa_close(smb_cli, &info->dom.lsa_info_pol) : False;
/* close the session */
cli_nt_session_close(smb_cli);
if (res)
{
DEBUG(5,("cmd_lsa_lookup_sids: query succeeded\n"));
}
else
{
DEBUG(5,("cmd_lsa_lookup_sids: query failed\n"));
}
if (names != NULL)
{
fprintf(out_hnd,"Lookup SIDS:\n");
for (i = 0; i < num_names; i++)
{
sid_to_string(temp, sids[i]);
fprintf(out_hnd, "SID: %s -> %s\n", temp, names[i]);
if (names[i] != NULL)
{
free(names[i]);
}
}
free(names);
}
}