NTSTATUS cli_nt_setup_netsec(struct cli_state *cli, int sec_chan, int auth_flags, const uchar trust_password[16]) { NTSTATUS result; uint32 neg_flags = NETLOGON_NEG_AUTH2_FLAGS; cli->pipe_auth_flags = 0; if (lp_client_schannel() == False) { return NT_STATUS_OK; } if (!cli_nt_session_open(cli, PI_NETLOGON)) { DEBUG(0, ("Could not initialise %s\n", get_pipe_name_from_index(PI_NETLOGON))); return NT_STATUS_UNSUCCESSFUL; } if (lp_client_schannel() != False) neg_flags |= NETLOGON_NEG_SCHANNEL; neg_flags |= NETLOGON_NEG_SCHANNEL; result = cli_nt_setup_creds(cli, sec_chan, trust_password, &neg_flags, 2); if (!(neg_flags & NETLOGON_NEG_SCHANNEL) && lp_client_schannel() == True) { DEBUG(1, ("Could not negotiate SCHANNEL with the DC!\n")); result = NT_STATUS_UNSUCCESSFUL; } if (!NT_STATUS_IS_OK(result)) { ZERO_STRUCT(cli->auth_info.sess_key); ZERO_STRUCT(cli->sess_key); cli->pipe_auth_flags = 0; cli_nt_session_close(cli); return result; } memcpy(cli->auth_info.sess_key, cli->sess_key, sizeof(cli->auth_info.sess_key)); cli->saved_netlogon_pipe_fnum = cli->nt_pipe_fnum; cli->nt_pipe_fnum = 0; /* doing schannel, not per-user auth */ cli->pipe_auth_flags = auth_flags; return NT_STATUS_OK; }
/** * confirm that a domain join is still valid * * @return A shell status integer (0 for success) * **/ static int net_rpc_join_ok(const char *domain) { struct cli_state *cli; uchar stored_md4_trust_password[16]; int retval = 1; uint32 channel; NTSTATUS result; /* Connect to remote machine */ if (!(cli = net_make_ipc_connection(NET_FLAGS_ANONYMOUS | NET_FLAGS_PDC))) { return 1; } if (!cli_nt_session_open(cli, PI_NETLOGON)) { DEBUG(0,("Error connecting to NETLOGON pipe\n")); goto done; } if (!secrets_fetch_trust_account_password(domain, stored_md4_trust_password, NULL, &channel)) { DEBUG(0,("Could not retreive domain trust secret")); goto done; } /* ensure that schannel uses the right domain */ fstrcpy(cli->domain, domain); if (! NT_STATUS_IS_OK(result = cli_nt_establish_netlogon(cli, channel, stored_md4_trust_password))) { DEBUG(0,("Error in domain join verfication (fresh connection)\n")); goto done; } retval = 0; /* Success! */ done: /* Close down pipe - this will clean up open policy handles */ if (cli->nt_pipe_fnum[cli->pipe_idx]) cli_nt_session_close(cli); cli_shutdown(cli); return retval; }
int net_rpc_join_newstyle(int argc, const char **argv) { /* libsmb variables */ struct cli_state *cli; TALLOC_CTX *mem_ctx; uint32 acb_info = ACB_WSTRUST; uint32 sec_channel_type; /* rpc variables */ POLICY_HND lsa_pol, sam_pol, domain_pol, user_pol; DOM_SID *domain_sid; uint32 user_rid; /* Password stuff */ char *clear_trust_password = NULL; uchar pwbuf[516]; SAM_USERINFO_CTR ctr; SAM_USER_INFO_24 p24; SAM_USER_INFO_10 p10; uchar md4_trust_password[16]; /* Misc */ NTSTATUS result; int retval = 1; char *domain; uint32 num_rids, *name_types, *user_rids; uint32 flags = 0x3e8; char *acct_name; const char *const_acct_name; /* check what type of join */ if (argc >= 0) { sec_channel_type = get_sec_channel_type(argv[0]); } else { sec_channel_type = get_sec_channel_type(NULL); } switch (sec_channel_type) { case SEC_CHAN_WKSTA: acb_info = ACB_WSTRUST; break; case SEC_CHAN_BDC: acb_info = ACB_SVRTRUST; break; #if 0 case SEC_CHAN_DOMAIN: acb_info = ACB_DOMTRUST; break; #endif } /* Connect to remote machine */ if (!(cli = net_make_ipc_connection(NET_FLAGS_PDC))) return 1; if (!(mem_ctx = talloc_init("net_rpc_join_newstyle"))) { DEBUG(0, ("Could not initialise talloc context\n")); goto done; } /* Fetch domain sid */ if (!cli_nt_session_open(cli, PI_LSARPC)) { DEBUG(0, ("Error connecting to LSA pipe\n")); goto done; } CHECK_RPC_ERR(cli_lsa_open_policy(cli, mem_ctx, True, SEC_RIGHTS_MAXIMUM_ALLOWED, &lsa_pol), "error opening lsa policy handle"); CHECK_RPC_ERR(cli_lsa_query_info_policy(cli, mem_ctx, &lsa_pol, 5, &domain, &domain_sid), "error querying info policy"); cli_lsa_close(cli, mem_ctx, &lsa_pol); cli_nt_session_close(cli); /* Done with this pipe */ /* Create domain user */ if (!cli_nt_session_open(cli, PI_SAMR)) { DEBUG(0, ("Error connecting to SAM pipe\n")); goto done; } CHECK_RPC_ERR(cli_samr_connect(cli, mem_ctx, SEC_RIGHTS_MAXIMUM_ALLOWED, &sam_pol), "could not connect to SAM database"); CHECK_RPC_ERR(cli_samr_open_domain(cli, mem_ctx, &sam_pol, SEC_RIGHTS_MAXIMUM_ALLOWED, domain_sid, &domain_pol), "could not open domain"); /* Create domain user */ acct_name = talloc_asprintf(mem_ctx, "%s$", global_myname()); strlower_m(acct_name); const_acct_name = acct_name; result = cli_samr_create_dom_user(cli, mem_ctx, &domain_pol, acct_name, acb_info, 0xe005000b, &user_pol, &user_rid); if (!NT_STATUS_IS_OK(result) && !NT_STATUS_EQUAL(result, NT_STATUS_USER_EXISTS)) { d_printf("Creation of workstation account failed\n"); /* If NT_STATUS_ACCESS_DENIED then we have a valid username/password combo but the user does not have administrator access. */ if (NT_STATUS_V(result) == NT_STATUS_V(NT_STATUS_ACCESS_DENIED)) d_printf("User specified does not have administrator privileges\n"); goto done; } /* We *must* do this.... don't ask... */ if (NT_STATUS_IS_OK(result)) cli_samr_close(cli, mem_ctx, &user_pol); CHECK_RPC_ERR_DEBUG(cli_samr_lookup_names(cli, mem_ctx, &domain_pol, flags, 1, &const_acct_name, &num_rids, &user_rids, &name_types), ("error looking up rid for user %s: %s\n", acct_name, nt_errstr(result))); if (name_types[0] != SID_NAME_USER) { DEBUG(0, ("%s is not a user account (type=%d)\n", acct_name, name_types[0])); goto done; } user_rid = user_rids[0]; /* Open handle on user */ CHECK_RPC_ERR_DEBUG( cli_samr_open_user(cli, mem_ctx, &domain_pol, SEC_RIGHTS_MAXIMUM_ALLOWED, user_rid, &user_pol), ("could not re-open existing user %s: %s\n", acct_name, nt_errstr(result))); /* Create a random machine account password */ { char *str; str = generate_random_str(DEFAULT_TRUST_ACCOUNT_PASSWORD_LENGTH); clear_trust_password = SMB_STRDUP(str); E_md4hash(clear_trust_password, md4_trust_password); } encode_pw_buffer(pwbuf, clear_trust_password, STR_UNICODE); /* Set password on machine account */ ZERO_STRUCT(ctr); ZERO_STRUCT(p24); init_sam_user_info24(&p24, (char *)pwbuf,24); ctr.switch_value = 24; ctr.info.id24 = &p24; CHECK_RPC_ERR(cli_samr_set_userinfo(cli, mem_ctx, &user_pol, 24, &cli->user_session_key, &ctr), "error setting trust account password"); /* Why do we have to try to (re-)set the ACB to be the same as what we passed in the samr_create_dom_user() call? When a NT workstation is joined to a domain by an administrator the acb_info is set to 0x80. For a normal user with "Add workstations to the domain" rights the acb_info is 0x84. I'm not sure whether it is supposed to make a difference or not. NT seems to cope with either value so don't bomb out if the set userinfo2 level 0x10 fails. -tpot */ ZERO_STRUCT(ctr); ctr.switch_value = 0x10; ctr.info.id10 = &p10; init_sam_user_info10(&p10, acb_info); /* Ignoring the return value is necessary for joining a domain as a normal user with "Add workstation to domain" privilege. */ result = cli_samr_set_userinfo2(cli, mem_ctx, &user_pol, 0x10, &cli->user_session_key, &ctr); /* Now check the whole process from top-to-bottom */ cli_samr_close(cli, mem_ctx, &user_pol); cli_nt_session_close(cli); /* Done with this pipe */ if (!cli_nt_session_open(cli, PI_NETLOGON)) { DEBUG(0,("Error connecting to NETLOGON pipe\n")); goto done; } /* ensure that schannel uses the right domain */ fstrcpy(cli->domain, domain); result = cli_nt_establish_netlogon(cli, sec_channel_type, md4_trust_password); if (!NT_STATUS_IS_OK(result)) { DEBUG(0, ("Error domain join verification (reused connection): %s\n\n", nt_errstr(result))); if ( NT_STATUS_EQUAL(result, NT_STATUS_ACCESS_DENIED) && (sec_channel_type == SEC_CHAN_BDC) ) { d_printf("Please make sure that no computer account\n" "named like this machine (%s) exists in the domain\n", global_myname()); } goto done; } /* Now store the secret in the secrets database */ strupper_m(domain); if (!secrets_store_domain_sid(domain, domain_sid)) { DEBUG(0, ("error storing domain sid for %s\n", domain)); goto done; } if (!secrets_store_machine_password(clear_trust_password, domain, sec_channel_type)) { DEBUG(0, ("error storing plaintext domain secrets for %s\n", domain)); } /* double-check, connection from scratch */ retval = net_rpc_join_ok(domain); done: /* Close down pipe - this will clean up open policy handles */ if (cli->nt_pipe_fnum[cli->pipe_idx]) cli_nt_session_close(cli); /* Display success or failure */ if (retval != 0) { fprintf(stderr,"Unable to join domain %s.\n",domain); } else { printf("Joined domain %s.\n",domain); } cli_shutdown(cli); SAFE_FREE(clear_trust_password); return retval; }
NTSTATUS change_trust_account_password( const char *domain, const char *remote_machine) { NTSTATUS nt_status = NT_STATUS_UNSUCCESSFUL; struct in_addr pdc_ip; fstring dc_name; struct cli_state *cli; DEBUG(5,("change_trust_account_password: Attempting to change trust account password in domain %s....\n", domain)); if (remote_machine == NULL || !strcmp(remote_machine, "*")) { /* Use the PDC *only* for this */ if ( !get_pdc_ip(domain, &pdc_ip) ) { DEBUG(0,("Can't get IP for PDC for domain %s\n", domain)); goto failed; } if ( !name_status_find( domain, 0x1b, 0x20, pdc_ip, dc_name) ) goto failed; } else { /* supoport old deprecated "smbpasswd -j DOMAIN -r MACHINE" behavior */ fstrcpy( dc_name, remote_machine ); } /* if this next call fails, then give up. We can't do password changes on BDC's --jerry */ if (!NT_STATUS_IS_OK(cli_full_connection(&cli, global_myname(), dc_name, NULL, 0, "IPC$", "IPC", "", "", "", 0, Undefined, NULL))) { DEBUG(0,("modify_trust_password: Connection to %s failed!\n", dc_name)); nt_status = NT_STATUS_UNSUCCESSFUL; goto failed; } /* * Ok - we have an anonymous connection to the IPC$ share. * Now start the NT Domain stuff :-). */ if(cli_nt_session_open(cli, PI_NETLOGON) == False) { DEBUG(0,("modify_trust_password: unable to open the domain client session to machine %s. Error was : %s.\n", dc_name, cli_errstr(cli))); cli_nt_session_close(cli); cli_ulogoff(cli); cli_shutdown(cli); nt_status = NT_STATUS_UNSUCCESSFUL; goto failed; } nt_status = trust_pw_find_change_and_store_it(cli, cli->mem_ctx, domain); cli_nt_session_close(cli); cli_ulogoff(cli); cli_shutdown(cli); failed: if (!NT_STATUS_IS_OK(nt_status)) { DEBUG(0,("%s : change_trust_account_password: Failed to change password for domain %s.\n", timestring(False), domain)); } else DEBUG(5,("change_trust_account_password: sucess!\n")); return nt_status; }
NTSTATUS cli_nt_establish_netlogon(struct cli_state *cli, int sec_chan, const uchar trust_password[16]) { NTSTATUS result; uint32 neg_flags = NETLOGON_NEG_AUTH2_FLAGS; int fnum; cli_nt_netlogon_netsec_session_close(cli); if (lp_client_schannel() != False) neg_flags |= NETLOGON_NEG_SCHANNEL; result = cli_nt_setup_creds(cli, sec_chan, trust_password, &neg_flags, 2); if (!NT_STATUS_IS_OK(result)) { cli_nt_session_close(cli); return result; } if ((lp_client_schannel() == True) && ((neg_flags & NETLOGON_NEG_SCHANNEL) == 0)) { DEBUG(3, ("Server did not offer schannel\n")); cli_nt_session_close(cli); return NT_STATUS_UNSUCCESSFUL; } if ((lp_client_schannel() == False) || ((neg_flags & NETLOGON_NEG_SCHANNEL) == 0)) { return NT_STATUS_OK; /* keep the existing connection to NETLOGON open */ } /* Server offered schannel, so try it. */ memcpy(cli->auth_info.sess_key, cli->sess_key, sizeof(cli->auth_info.sess_key)); cli->saved_netlogon_pipe_fnum = cli->nt_pipe_fnum; cli->pipe_auth_flags = AUTH_PIPE_NETSEC; cli->pipe_auth_flags |= AUTH_PIPE_SIGN; cli->pipe_auth_flags |= AUTH_PIPE_SEAL; if (cli->capabilities & CAP_NT_SMBS) { /* The secure channel connection must be opened on the same session (TCP connection) as the one the challenge was requested from. */ if ((fnum = cli_nt_create(cli, PIPE_NETLOGON_PLAIN, DESIRED_ACCESS_PIPE)) == -1) { DEBUG(0,("cli_nt_create failed to %s machine %s. " "Error was %s\n", PIPE_NETLOGON, cli->desthost, cli_errstr(cli))); return NT_STATUS_UNSUCCESSFUL; } cli->nt_pipe_fnum = (uint16)fnum; } else { if ((fnum = cli_open(cli, PIPE_NETLOGON, O_CREAT|O_RDWR, DENY_NONE)) == -1) { DEBUG(0,("cli_open failed on pipe %s to machine %s. " "Error was %s\n", PIPE_NETLOGON, cli->desthost, cli_errstr(cli))); return NT_STATUS_UNSUCCESSFUL; } cli->nt_pipe_fnum = (uint16)fnum; /**************** Set Named Pipe State ***************/ if (!rpc_pipe_set_hnd_state(cli, PIPE_NETLOGON, 0x4300)) { DEBUG(0,("Pipe hnd state failed. Error was %s\n", cli_errstr(cli))); cli_close(cli, cli->nt_pipe_fnum); return NT_STATUS_UNSUCCESSFUL; } } if (!rpc_pipe_bind(cli, PI_NETLOGON, global_myname())) { DEBUG(2,("rpc bind to %s failed\n", PIPE_NETLOGON)); cli_close(cli, cli->nt_pipe_fnum); return NT_STATUS_UNSUCCESSFUL; } return NT_STATUS_OK; }
static int join_domain_byuser(char *domain, const char *remote, char *username, char *password) { /* libsmb variables */ pstring pdc_name; struct nmb_name calling, called; struct ntuser_creds creds; struct cli_state cli; fstring acct_name; struct in_addr dest_ip; TALLOC_CTX *mem_ctx; /* rpc variables */ POLICY_HND lsa_pol, sam_pol, domain_pol, user_pol; DOM_SID domain_sid; uint32 user_rid; /* Password stuff */ char *machine_pwd; int plen = 0; uchar pwbuf[516], ntpw[16], sess_key[16]; SAM_USERINFO_CTR ctr; SAM_USER_INFO_24 p24; SAM_USER_INFO_10 p10; /* Misc */ NTSTATUS result; int retval = 1; pstrcpy(pdc_name, remote ? remote : ""); /* Connect to remote machine */ ZERO_STRUCT(cli); ZERO_STRUCT(creds); ZERO_STRUCT(dest_ip); /* Make sure no nasty surprises */ if (!(mem_ctx = talloc_init())) { DEBUG(0, ("Could not initialise talloc context\n")); goto done; } if (!cli_initialise(&cli)) { DEBUG(0, ("Could not initialise client structure\n")); goto done; } init_rpcclient_creds(&creds, username, domain, password); cli_init_creds(&cli, &creds); /* * If we are given a remote machine assume this is the PDC. */ if(remote == NULL || !strcmp(remote, "*")) { struct in_addr *ip_list; int addr_count; if (!get_dc_list(True /* PDC only*/, domain, &ip_list, &addr_count)) { fprintf(stderr, "Unable to find the domain controller for domain %s.\n", domain); return 1; } if ((addr_count < 1) || (is_zero_ip(ip_list[0]))) { fprintf(stderr, "Incorrect entries returned when finding the domain controller for domain %s.\n", domain); return 1; } if (!lookup_dc_name(global_myname, domain, &ip_list[0], pdc_name)) { fprintf(stderr, "Unable to lookup the name for the domain controller for domain %s.\n", domain); return 1; } dest_ip = ip_list[0]; } make_nmb_name(&called, pdc_name, 0x20); make_nmb_name(&calling, dns_to_netbios_name(global_myname), 0); if (!cli_establish_connection(&cli, pdc_name, &dest_ip, &calling, &called, "IPC$", "IPC", False, True)) { if (!NT_STATUS_IS_OK(cli_nt_error(&cli))) { DEBUG(0, ("Error connecting to %s - %s\n", pdc_name,cli_errstr(&cli))); } else { DEBUG(0, ("Error connecting to %s\n", pdc_name)); } goto done; } /* Fetch domain sid */ if (!cli_nt_session_open(&cli, PIPE_LSARPC)) { DEBUG(0, ("Error connecting to SAM pipe\n")); goto done; } CHECK_RPC_ERR(cli_lsa_open_policy(&cli, mem_ctx, True, SEC_RIGHTS_MAXIMUM_ALLOWED, &lsa_pol), "error opening lsa policy handle"); CHECK_RPC_ERR(cli_lsa_query_info_policy(&cli, mem_ctx, &lsa_pol, 5, domain, &domain_sid), "error querying info policy"); cli_lsa_close(&cli, mem_ctx, &lsa_pol); cli_nt_session_close(&cli); /* Done with this pipe */ /* Create domain user */ if (!cli_nt_session_open(&cli, PIPE_SAMR)) { DEBUG(0, ("Error connecting to SAM pipe\n")); goto done; } CHECK_RPC_ERR(cli_samr_connect(&cli, mem_ctx, SEC_RIGHTS_MAXIMUM_ALLOWED, &sam_pol), "could not connect to SAM database"); CHECK_RPC_ERR(cli_samr_open_domain(&cli, mem_ctx, &sam_pol, SEC_RIGHTS_MAXIMUM_ALLOWED, &domain_sid, &domain_pol), "could not open domain"); /* Create domain user */ fstrcpy(acct_name, global_myname); fstrcat(acct_name, "$"); strlower(acct_name); { uint32 unknown = 0xe005000b; result = cli_samr_create_dom_user(&cli, mem_ctx, &domain_pol, acct_name, ACB_WSTRUST, unknown, &user_pol, &user_rid); } if (NT_STATUS_IS_OK(result)) { /* We *must* do this.... don't ask... */ CHECK_RPC_ERR_DEBUG(cli_samr_close(&cli, mem_ctx, &user_pol), ("error closing user policy")); result = NT_STATUS_USER_EXISTS; } if (NT_STATUS_V(result) == NT_STATUS_V(NT_STATUS_USER_EXISTS)) { uint32 num_rids, *name_types, *user_rids; uint32 flags = 0x3e8; const char *names; /* Look up existing rid */ names = (char *)&acct_name[0]; CHECK_RPC_ERR_DEBUG( cli_samr_lookup_names(&cli, mem_ctx, &domain_pol, flags, 1, &names, &num_rids, &user_rids, &name_types), ("error looking up rid for user %s: %s\n", acct_name, get_nt_error_msg(result))); if (name_types[0] != SID_NAME_USER) { DEBUG(0, ("%s is not a user account\n", acct_name)); goto done; } user_rid = user_rids[0]; /* Open handle on user */ CHECK_RPC_ERR_DEBUG( cli_samr_open_user(&cli, mem_ctx, &domain_pol, SEC_RIGHTS_MAXIMUM_ALLOWED, user_rid, &user_pol), ("could not re-open existing user %s: %s\n", acct_name, get_nt_error_msg(result))); } else if (!NT_STATUS_IS_OK(result)) { DEBUG(0, ("error creating domain user: %s\n", get_nt_error_msg(result))); goto done; } /* Create a random machine account password */ { UNISTR2 upw; /* Unicode password */ upw.buffer = (uint16 *)talloc_zero(mem_ctx, 0xc * sizeof(uint16)); upw.uni_str_len = 0xc; upw.uni_max_len = 0xc; machine_pwd = (char *)upw.buffer; plen = upw.uni_str_len * 2; generate_random_buffer((unsigned char *)machine_pwd, plen, True); encode_pw_buffer((char *)pwbuf, machine_pwd, plen, False); mdfour( ntpw, (unsigned char *)upw.buffer, plen); } /* Set password on machine account */ ZERO_STRUCT(ctr); ZERO_STRUCT(p24); init_sam_user_info24(&p24, (char *)pwbuf,24); ctr.switch_value = 24; ctr.info.id24 = &p24; /* I don't think this is quite the right place for this calculation. It should be moved somewhere where the credentials are calculated. )-: */ mdfour(sess_key, cli.pwd.smb_nt_pwd, 16); CHECK_RPC_ERR(cli_samr_set_userinfo(&cli, mem_ctx, &user_pol, 24, sess_key, &ctr), "error setting trust account password"); /* Why do we have to try to (re-)set the ACB to be the same as what we passed in the samr_create_dom_user() call? When a NT workstation is joined to a domain by an administrator the acb_info is set to 0x80. For a normal user with "Add workstations to the domain" rights the acb_info is 0x84. I'm not sure whether it is supposed to make a difference or not. NT seems to cope with either value so don't bomb out if the set userinfo2 level 0x10 fails. -tpot */ ZERO_STRUCT(ctr); ctr.switch_value = 0x10; ctr.info.id10 = &p10; init_sam_user_info10(&p10, ACB_WSTRUST); /* Ignoring the return value is necessary for joining a domain as a normal user with "Add workstation to domain" privilege. */ result = cli_samr_set_userinfo2(&cli, mem_ctx, &user_pol, 0x10, sess_key, &ctr); /* Now store the secret in the secrets database */ strupper(domain); if (!secrets_store_domain_sid(domain, &domain_sid) || !secrets_store_trust_account_password(domain, ntpw)) { DEBUG(0, ("error storing domain secrets\n")); goto done; } retval = 0; /* Success! */ done: /* Close down pipe - this will clean up open policy handles */ if (cli.nt_pipe_fnum) cli_nt_session_close(&cli); /* Display success or failure */ if (retval != 0) { trust_password_delete(domain); fprintf(stderr,"Unable to join domain %s.\n",domain); } else { printf("Joined domain %s.\n",domain); } return retval; }
/**************************************************************************** nt lsa query ****************************************************************************/ void cmd_lsa_query_info(struct client_info *info) { fstring srv_name; BOOL res = True; fstrcpy(info->dom.level3_dom, ""); fstrcpy(info->dom.level5_dom, ""); ZERO_STRUCT(info->dom.level3_sid); ZERO_STRUCT(info->dom.level5_sid); fstrcpy(srv_name, "\\\\"); fstrcat(srv_name, info->myhostname); strupper(srv_name); DEBUG(4,("cmd_lsa_query_info: server:%s\n", srv_name)); DEBUG(5, ("cmd_lsa_query_info: smb_cli->fd:%d\n", smb_cli->fd)); /* open LSARPC session. */ res = res ? cli_nt_session_open(smb_cli, PIPE_LSARPC) : False; /* lookup domain controller; receive a policy handle */ res = res ? do_lsa_open_policy(smb_cli, srv_name, &info->dom.lsa_info_pol, False) : False; /* send client info query, level 3. receive domain name and sid */ res = res ? do_lsa_query_info_pol(smb_cli, &info->dom.lsa_info_pol, 0x03, info->dom.level3_dom, &info->dom.level3_sid) : False; /* send client info query, level 5. receive domain name and sid */ res = res ? do_lsa_query_info_pol(smb_cli, &info->dom.lsa_info_pol, 0x05, info->dom.level5_dom, &info->dom.level5_sid) : False; res = res ? do_lsa_close(smb_cli, &info->dom.lsa_info_pol) : False; /* close the session */ cli_nt_session_close(smb_cli); if (res) { BOOL domain_something = False; fstring sid; DEBUG(5,("cmd_lsa_query_info: query succeeded\n")); fprintf(out_hnd, "LSA Query Info Policy\n"); if (info->dom.level3_dom[0] != 0) { sid_to_string(sid, &info->dom.level3_sid); fprintf(out_hnd, "Domain Member - Domain: %s SID: %s\n", info->dom.level3_dom, sid); domain_something = True; } if (info->dom.level5_dom[0] != 0) { sid_to_string(sid, &info->dom.level5_sid); fprintf(out_hnd, "Domain Controller - Domain: %s SID: %s\n", info->dom.level5_dom, sid); domain_something = True; } if (!domain_something) { fprintf(out_hnd, "%s is not a Domain Member or Controller\n", info->dest_host); } } else { DEBUG(5,("cmd_lsa_query_info: query failed\n")); } }
/**************************************************************************** nt lsa query ****************************************************************************/ void cmd_lsa_lookup_sids(struct client_info *info) { fstring temp; int i; fstring sid_name; fstring srv_name; DOM_SID sid[10]; DOM_SID *sids[10]; int num_sids = 0; char **names = NULL; int num_names = 0; BOOL res = True; fstrcpy(srv_name, "\\\\"); fstrcat(srv_name, info->myhostname); strupper(srv_name); DEBUG(4,("cmd_lsa_lookup_sids: server: %s\n", srv_name)); while (num_sids < 10 && next_token(NULL, temp, NULL, sizeof(temp))) { if (strnequal("S-", temp, 2)) { fstrcpy(sid_name, temp); } else { sid_to_string(sid_name, &info->dom.level5_sid); if (sid_name[0] == 0) { fprintf(out_hnd, "please use lsaquery first or specify a complete SID\n"); return; } fstrcat(sid_name, "-"); fstrcat(sid_name, temp); } init_dom_sid(&sid[num_sids], sid_name); sids[num_sids] = &sid[num_sids]; num_sids++; } if (num_sids == 0) { fprintf(out_hnd, "lookupsid RID or SID\n"); return; } /* open LSARPC session. */ res = res ? cli_nt_session_open(smb_cli, PIPE_LSARPC) : False; /* lookup domain controller; receive a policy handle */ res = res ? do_lsa_open_policy(smb_cli, srv_name, &info->dom.lsa_info_pol, True) : False; /* send lsa lookup sids call */ res = res ? do_lsa_lookup_sids(smb_cli, &info->dom.lsa_info_pol, num_sids, sids, &names, &num_names) : False; res = res ? do_lsa_close(smb_cli, &info->dom.lsa_info_pol) : False; /* close the session */ cli_nt_session_close(smb_cli); if (res) { DEBUG(5,("cmd_lsa_lookup_sids: query succeeded\n")); } else { DEBUG(5,("cmd_lsa_lookup_sids: query failed\n")); } if (names != NULL) { fprintf(out_hnd,"Lookup SIDS:\n"); for (i = 0; i < num_names; i++) { sid_to_string(temp, sids[i]); fprintf(out_hnd, "SID: %s -> %s\n", temp, names[i]); if (names[i] != NULL) { free(names[i]); } } free(names); } }