// ------------------------------------------------------------------------------------------------
void TempMesh::FixupFaceOrientation()
{
const IfcVector3 vavg = Center();
// create a list of start indices for all faces to allow random access to faces
std::vector<size_t> faceStartIndices(vertcnt.size());
for( size_t i = 0, a = 0; a < vertcnt.size(); i += vertcnt[a], ++a )
faceStartIndices[a] = i;
// list all faces on a vertex
std::map<IfcVector3, std::vector<size_t>, CompareVector> facesByVertex;
for( size_t a = 0; a < vertcnt.size(); ++a )
{
for( size_t b = 0; b < vertcnt[a]; ++b )
facesByVertex[verts[faceStartIndices[a] + b]].push_back(a);
}
// determine neighbourhood for all polys
std::vector<size_t> neighbour(verts.size(), SIZE_MAX);
std::vector<size_t> tempIntersect(10);
for( size_t a = 0; a < vertcnt.size(); ++a )
{
for( size_t b = 0; b < vertcnt[a]; ++b )
{
size_t ib = faceStartIndices[a] + b, nib = faceStartIndices[a] + (b + 1) % vertcnt[a];
const std::vector<size_t>& facesOnB = facesByVertex[verts[ib]];
const std::vector<size_t>& facesOnNB = facesByVertex[verts[nib]];
// there should be exactly one or two faces which appear in both lists. Our face and the other side
std::vector<size_t>::iterator sectstart = tempIntersect.begin();
std::vector<size_t>::iterator sectend = std::set_intersection(
facesOnB.begin(), facesOnB.end(), facesOnNB.begin(), facesOnNB.end(), sectstart);
if( std::distance(sectstart, sectend) != 2 )
continue;
if( *sectstart == a )
++sectstart;
neighbour[ib] = *sectstart;
}
}
// now we're getting started. We take the face which is the farthest away from the center. This face is most probably
// facing outwards. So we reverse this face to point outwards in relation to the center. Then we adapt neighbouring
// faces to have the same winding until all faces have been tested.
std::vector<bool> faceDone(vertcnt.size(), false);
while( std::count(faceDone.begin(), faceDone.end(), false) != 0 )
{
// find the farthest of the remaining faces
size_t farthestIndex = SIZE_MAX;
IfcFloat farthestDistance = -1.0;
for( size_t a = 0; a < vertcnt.size(); ++a )
{
if( faceDone[a] )
continue;
IfcVector3 faceCenter = std::accumulate(verts.begin() + faceStartIndices[a],
verts.begin() + faceStartIndices[a] + vertcnt[a], IfcVector3(0.0)) / IfcFloat(vertcnt[a]);
IfcFloat dst = (faceCenter - vavg).SquareLength();
if( dst > farthestDistance ) { farthestDistance = dst; farthestIndex = a; }
}
// calculate its normal and reverse the poly if its facing towards the mesh center
IfcVector3 farthestNormal = ComputePolygonNormal(verts.data() + faceStartIndices[farthestIndex], vertcnt[farthestIndex]);
IfcVector3 farthestCenter = std::accumulate(verts.begin() + faceStartIndices[farthestIndex],
verts.begin() + faceStartIndices[farthestIndex] + vertcnt[farthestIndex], IfcVector3(0.0))
/ IfcFloat(vertcnt[farthestIndex]);
// We accapt a bit of negative orientation without reversing. In case of doubt, prefer the orientation given in
// the file.
if( (farthestNormal * (farthestCenter - vavg).Normalize()) < -0.4 )
{
size_t fsi = faceStartIndices[farthestIndex], fvc = vertcnt[farthestIndex];
std::reverse(verts.begin() + fsi, verts.begin() + fsi + fvc);
std::reverse(neighbour.begin() + fsi, neighbour.begin() + fsi + fvc);
// because of the neighbour index belonging to the edge starting with the point at the same index, we need to
// cycle the neighbours through to match the edges again.
// Before: points A - B - C - D with edge neighbour p - q - r - s
// After: points D - C - B - A, reversed neighbours are s - r - q - p, but the should be
// r q p s
for( size_t a = 0; a < fvc - 1; ++a )
std::swap(neighbour[fsi + a], neighbour[fsi + a + 1]);
}
faceDone[farthestIndex] = true;
std::vector<size_t> todo;
todo.push_back(farthestIndex);
// go over its neighbour faces recursively and adapt their winding order to match the farthest face
while( !todo.empty() )
{
size_t tdf = todo.back();
size_t vsi = faceStartIndices[tdf], vc = vertcnt[tdf];
todo.pop_back();
// check its neighbours
for( size_t a = 0; a < vc; ++a )
{
// ignore neighbours if we already checked them
size_t nbi = neighbour[vsi + a];
if( nbi == SIZE_MAX || faceDone[nbi] )
continue;
const IfcVector3& vp = verts[vsi + a];
size_t nbvsi = faceStartIndices[nbi], nbvc = vertcnt[nbi];
std::vector<IfcVector3>::iterator it = std::find_if(verts.begin() + nbvsi, verts.begin() + nbvsi + nbvc, FindVector(vp));
ai_assert(it != verts.begin() + nbvsi + nbvc);
size_t nb_vidx = std::distance(verts.begin() + nbvsi, it);
// two faces winded in the same direction should have a crossed edge, where one face has p0->p1 and the other
// has p1'->p0'. If the next point on the neighbouring face is also the next on the current face, we need
// to reverse the neighbour
nb_vidx = (nb_vidx + 1) % nbvc;
size_t oursideidx = (a + 1) % vc;
if( FuzzyVectorCompare(1e-6)(verts[vsi + oursideidx], verts[nbvsi + nb_vidx]) )
{
std::reverse(verts.begin() + nbvsi, verts.begin() + nbvsi + nbvc);
std::reverse(neighbour.begin() + nbvsi, neighbour.begin() + nbvsi + nbvc);
for( size_t a = 0; a < nbvc - 1; ++a )
std::swap(neighbour[nbvsi + a], neighbour[nbvsi + a + 1]);
}
// either way we're done with the neighbour. Mark it as done and continue checking from there recursively
faceDone[nbi] = true;
todo.push_back(nbi);
}
}
// no more faces reachable from this part of the surface, start over with a disjunct part and its farthest face
}
}
void FaceSinkGraph::sinkSwitches(FaceArray< List<adjEntry> > &faceSwitches) {
OGDF_ASSERT(m_pE->externalFace() != nullptr);
List<adjEntry> dummyList;
faceSwitches.init(*m_pE, dummyList);
NodeArray<bool> visited(m_pE->getGraph(), false);
List<face> toDo;
FaceArray<bool> faceDone(*m_pE, false);
#if 0
m_pE->getGraph().writeGML("c:/temp/debug.gml");
#endif
//compute sink-switches for the ext. face
for(adjEntry adj : m_pE->externalFace()->entries)
{
node u = adj->theNode();
if (u->outdeg() == 0 && !visited[u])
faceSwitches[m_pE->externalFace()].pushBack(adj);
if (u->indeg() > 1 && !visited[u]) {
List<edge> outEdges;
u->outEdges(outEdges);
if (outEdges.empty()) {
for(adjEntry run : u->adjEntries) {
if (m_pE->rightFace(run) != m_pE->externalFace())
toDo.pushBack(m_pE->rightFace(run));
}
}
else {
edge e = outEdges.front();
adjEntry run = e->adjSource();
run = run->cyclicSucc();
while (run->theEdge() != e) {
adjEntry next = run->cyclicSucc();
if (next->theEdge()->target() == u && run->theEdge()->target() == u)
toDo.pushBack(m_pE->rightFace(run));
run = run->cyclicSucc();
}
}
}
visited[u] = true;
}
faceDone[m_pE->externalFace()] = true;
while (!toDo.empty()) {
face f = toDo.popFrontRet();
if (faceDone[f])
continue;
for(adjEntry adj : f->entries) {
node u = adj->theNode();
if (visited[u] && adj->theEdge()->target() == adj->faceCyclePred()->theEdge()->target()
&& m_pE->rightFace(adj) != m_pE->leftFace(adj))
faceSwitches[f].pushFront(adj); // the top sink switch of f
else {
if (u->outdeg() == 0)
faceSwitches[f].pushBack(adj); // the non top sink switch of f
}
if (u->indeg() > 1) {
List<edge> outEdges;
u->outEdges(outEdges);
if (outEdges.empty()) {
for(adjEntry run : u->adjEntries) {
if (m_pE->rightFace(run) != f)
toDo.pushBack(m_pE->rightFace(run));
}
}
else {
edge e = outEdges.front();
adjEntry run = e->adjSource();
run = run->cyclicSucc();
while (run->theEdge() != e) {
adjEntry next = run->cyclicSucc();
if (next->theEdge()->target() == u && run->theEdge()->target() == u)
toDo.pushBack(m_pE->rightFace(run));
run = run->cyclicSucc();
}
}
}
visited[u] = true;
}
faceDone[f] = true;
OGDF_ASSERT(!faceSwitches[f].empty());
}
#if 0
std::cout << std::endl;
std::cout << "switche (FaceSinkGraph::sinkSwitches) : " << std::endl;
for(face f : m_pE->faces) {
std::cout << "face : " << f->index() << std::endl;
const List<adjEntry> &adjList = faceSwitches[f];
for(adjEntry adj : adjList) {
std::cout << adj->theNode() << "; ";
}
std::cout << std::endl;
}
#endif
}
