Exemplo n.º 1
0
void NES_mapper248::SNSS_fixup() // HACK HACK HACK HACK
{
  nes6502_context *context;
  context = nes6502_get_current_context ();
  
  prg0 = MAP248_ROM(context->mem_page[prg_swap() ? 6 : 4]);
  prg1 = MAP248_ROM(context->mem_page[5]);

  if(chr_swap())
  {
    chr01 = MAP248_VROM(attached_ppu->PPU_VRAM_banks[4]);
    chr23 = MAP248_VROM(attached_ppu->PPU_VRAM_banks[6]);
    chr4  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[0]);
    chr5  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[1]);
    chr6  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[2]);
    chr7  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[3]);
  }
  else
  {
    chr01 = MAP248_VROM(attached_ppu->PPU_VRAM_banks[0]);
    chr23 = MAP248_VROM(attached_ppu->PPU_VRAM_banks[2]);
    chr4  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[4]);
    chr5  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[5]);
    chr6  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[6]);
    chr7  = MAP248_VROM(attached_ppu->PPU_VRAM_banks[7]);
  }
}
Exemplo n.º 2
0
void NES_mapper248::MMC3_set_CPU_banks()
{
  if(prg_swap())
  {
    set_CPU_banks(num_8k_ROM_banks-2,prg1,prg0,num_8k_ROM_banks-1);
  }
  else
  {
    set_CPU_banks(prg0,prg1,num_8k_ROM_banks-2,num_8k_ROM_banks-1);
  }
}
Exemplo n.º 3
0
void extcl_cpu_wr_mem_MMC5(WORD address, BYTE value) {
	if (address < 0x5000) {
		return;
	}

	switch (address) {
		case 0x5000:
			square_reg0(mmc5.S3);
			return;
		case 0x5001:
			/* lo sweep non e' utilizzato */
			return;
		case 0x5002:
			square_reg2(mmc5.S3);
			return;
		case 0x5003:
			square_reg3(mmc5.S3);
			return;
		case 0x5004:
			square_reg0(mmc5.S4);
			return;
		case 0x5005:
			/* lo sweep non e' utilizzato */
			return;
		case 0x5006:
			square_reg2(mmc5.S4);
			return;
		case 0x5007:
			square_reg3(mmc5.S4);
			return;
		case 0x5010:
			mmc5.pcm.enabled = ~value & 0x01;
			mmc5.pcm.output = 0;
			if (mmc5.pcm.enabled) {
				mmc5.pcm.output = mmc5.pcm.amp;
			}
			mmc5.pcm.clocked = TRUE;
			return;
		case 0x5011:
			mmc5.pcm.amp = value;
			mmc5.pcm.output = 0;
			if (mmc5.pcm.enabled) {
				mmc5.pcm.output = mmc5.pcm.amp;
			}
			mmc5.pcm.clocked = TRUE;
			return;
		case 0x5015:
			if (!(mmc5.S3.length.enabled = value & 0x01)) {
				mmc5.S3.length.value = 0;
			}
			if (!(mmc5.S4.length.enabled = value & 0x02)) {
				mmc5.S4.length.value = 0;
			}
			return;
		case 0x5100:
			value &= 0x03;
			if (value != mmc5.prg_mode) {
				mmc5.prg_mode = value;
				prg_swap();
			}
			return;
		case 0x5101:
			value &= 0x03;
			if (value != mmc5.chr_mode) {
				mmc5.chr_mode = value;
				if ((r2000.size_spr != 16) || !r2001.visible || r2002.vblank) {
					if (mmc5.chr_last == CHR_S) {
						use_chr_s();
					} else {
						use_chr_b();
					}
				}
			}
			return;
		case 0x5102:
		case 0x5103:
			mmc5.prg_ram_write[address & 0x0001] = value & 0x03;
			if ((mmc5.prg_ram_write[0] == 0x02) && (mmc5.prg_ram_write[1] == 0x01)) {
				cpu.prg_ram_wr_active = TRUE;
			} else {
				cpu.prg_ram_wr_active = FALSE;
			}
			return;
		case 0x5104:
			mmc5.ext_mode = value & 0x03;
			return;
		case 0x5105:
			nmt_update(0, 0)
			nmt_update(2, 1)
			nmt_update(4, 2)
			nmt_update(6, 3)
			return;
/* --------------------------------- PRG bankswitching ---------------------------------*/
		case 0x5106:
			mmc5.fill_tile = value;
			memset(&mmc5.fill_table[0], mmc5.fill_tile, 0x3C0);
			memset(&mmc5.fill_table[0x3C0], filler_attrib[mmc5.fill_attr], 0x40);
			return;
		case 0x5107:
			mmc5.fill_attr = value & 0x03;
			memset(&mmc5.fill_table[0x3C0], filler_attrib[mmc5.fill_attr], 0x40);
			return;
		case 0x5113: {
			BYTE bank = prg_ram_access[prg_ram_mode][value & 0x07];

			if (bank != INVALID) {
				prg.ram_plus_8k = &prg.ram_plus[bank * 0x2000];
			}
			return;
		}
		case 0x5114:
		case 0x5115:
		case 0x5116:
		case 0x5117:
			address &= 0x0003;
			if (mmc5.prg_bank[address] != value) {
				mmc5.prg_bank[address] = value;
				prg_swap();
			}
			return;
/* --------------------------------- CHR bankswitching ---------------------------------*/
		case 0x5120:
		case 0x5121:
		case 0x5122:
		case 0x5123:
		case 0x5124:
		case 0x5125:
		case 0x5126:
		case 0x5127: {
			WORD bank = value | (mmc5.chr_high << 2);

			address &= 0x0007;

			if ((mmc5.chr_last != CHR_S) || (mmc5.chr_s[address] != bank)) {
				mmc5.chr_s[address] = bank;
				mmc5.chr_last = CHR_S;
				if ((r2000.size_spr != 16) || !r2001.visible || r2002.vblank) {
					use_chr_s();
				}
			}
			return;
		}
		case 0x5128:
		case 0x5129:
		case 0x512A:
		case 0x512B: {
			WORD bank = value | (mmc5.chr_high << 2);

			address &= 0x0003;

			if ((mmc5.chr_last != CHR_B) || (mmc5.chr_b[address] != bank)) {
				mmc5.chr_b[address] = bank;
				mmc5.chr_last = CHR_B;
				if ((r2000.size_spr != 16) || !r2001.visible || r2002.vblank) {
					use_chr_b();
				}
			}
			return;
		}
		case 0x5130:
			mmc5.chr_high = (value & 0x03) << 6;
			return;
		case 0x5200:
			mmc5.split = value & 0x80;
			mmc5.split_side = value & 0x40;
			mmc5.split_st_tile = value & 0x1F;
			return;
		case 0x5201:
			if (value >= 240) {
				value -= 16;
			}
			mmc5.split_scrl = value;
			return;
		case 0x5202:
			control_bank(info.chr.rom.max.banks_4k)
			mmc5.split_bank = value << 12;
			return;
		case 0x5203:
			irql2f.scanline = value;
			return;
		case 0x5204:
			if (value & 0x80) {
				irql2f.enable = TRUE;
				return;
			}
			irql2f.enable = FALSE;
			/* disabilito l'IRQ dell'MMC5 */
			irq.high &= ~EXT_IRQ;
			return;
		case 0x5205:
			mmc5.factor[0] = value;
			mmc5.product = mmc5.factor[0] * mmc5.factor[1];
			return;
		case 0x5206:
			mmc5.factor[1] = value;
			mmc5.product = mmc5.factor[0] * mmc5.factor[1];
			return;
		default:
			if ((address >= 0x5C00) && (address < 0x6000)) {
				address &= 0x03FF;
				if (mmc5.ext_mode < MODE2) {
					if (!r2002.vblank && r2001.visible && (ppu.screen_y < SCR_LINES)) {
						mmc5.ext_ram[address] = value;
					} else {
						mmc5.ext_ram[address] = 0;
					}
					return;
				}
				if (mmc5.ext_mode == MODE2) {
					mmc5.ext_ram[address] = value;
					return;
				}
				return;
			}
			/*
			 * posso memorizzare nella PRG rom solo se il banco in cui
			 * la rom vuole scrivere punta ad un banco di PRG ram.
			 */
			if (address >= 0x8000) {
				BYTE index = ((address >> 13) & 0x03);
				if (mmc5.prg_ram_bank[index][0] && cpu.prg_ram_wr_active) {
					prg.rom_8k[index][address & 0x1FFF] = value;
				}
			}
			return;
	}