void Image::cacheFrame(size_t index)
{
size_t numFrames = frameCount();
ASSERT(m_decodedSize == 0 || numFrames > 1);
if (!m_frames.size() && shouldAnimate()) {
// Snag the repetition count.
m_repetitionCount = m_source.repetitionCount();
if (m_repetitionCount == cAnimationNone)
m_animatingImageType = false;
}
if (m_frames.size() < numFrames)
m_frames.resize(numFrames);
m_frames[index].m_frame = m_source.createFrameAtIndex(index);
if (numFrames == 1 && m_frames[index].m_frame)
checkForSolidColor();
if (shouldAnimate())
m_frames[index].m_duration = m_source.frameDurationAtIndex(index);
m_frames[index].m_hasAlpha = m_source.frameHasAlphaAtIndex(index);
int sizeChange = m_frames[index].m_frame ? m_size.width() * m_size.height() * 4 : 0;
if (sizeChange) {
if (imageObserver())
imageObserver()->decodedSizeChanging(this, sizeChange);
m_decodedSize += sizeChange;
if (imageObserver())
imageObserver()->decodedSizeChanged(this, sizeChange);
}
}
void BitmapImage::cacheFrame(size_t index)
{
size_t numFrames = frameCount();
ASSERT(m_decodedSize == 0 || numFrames > 1);
if (!m_frames.size() && shouldAnimate()) {
// Snag the repetition count. Note that the repetition count may not be
// accurate yet for GIFs; if we haven't gotten the count from the source
// image yet, it will default to cAnimationLoopOnce, and we'll try and
// read it again once the whole image is decoded.
m_repetitionCount = m_source.repetitionCount();
if (m_repetitionCount == cAnimationNone)
m_animatingImageType = false;
}
if (m_frames.size() < numFrames)
m_frames.grow(numFrames);
m_frames[index].m_frame = m_source.createFrameAtIndex(index);
if (numFrames == 1 && m_frames[index].m_frame)
checkForSolidColor();
if (shouldAnimate())
m_frames[index].m_duration = m_source.frameDurationAtIndex(index);
m_frames[index].m_hasAlpha = m_source.frameHasAlphaAtIndex(index);
int sizeChange;
if (index) {
IntSize frameSize = m_source.frameSizeAtIndex(index);
if (frameSize != m_size)
m_hasUniformFrameSize = false;
sizeChange = m_frames[index].m_frame ? frameSize.width() * frameSize.height() * 4 : 0;
} else
sizeChange = m_frames[index].m_frame ? m_size.width() * m_size.height() * 4 : 0;
if (sizeChange) {
m_decodedSize += sizeChange;
if (imageObserver())
imageObserver()->decodedSizeChanged(this, sizeChange);
}
}
void Image::startAnimation()
{
if (m_frameTimer || !shouldAnimate() || frameCount() <= 1)
return;
// Don't advance the animation until the current frame has completely loaded.
if (!m_source.frameIsCompleteAtIndex(m_currentFrame))
return;
m_frameTimer = new Timer<Image>(this, &Image::advanceAnimation);
m_frameTimer->startOneShot(frameDurationAtIndex(m_currentFrame));
}
void BitmapImage::startAnimation()
{
if (m_frameTimer || !shouldAnimate() || frameCount() <= 1)
return;
// Don't advance the animation until the current frame has completely loaded.
if (!m_source.frameIsCompleteAtIndex(m_currentFrame))
return;
// Don't advance past the last frame if we haven't decoded the whole image
// yet and our repetition count is potentially unset. The repetition count
// in a GIF can potentially come after all the rest of the image data, so
// wait on it.
if (!m_allDataReceived && m_repetitionCount == cAnimationLoopOnce && m_currentFrame >= (frameCount() - 1))
return;
// Determine time for next frame to start. By ignoring paint and timer lag
// in this calculation, we make the animation appear to run at its desired
// rate regardless of how fast it's being repainted.
const double currentDuration = frameDurationAtIndex(m_currentFrame);
const double time = currentTime();
if (!m_desiredFrameStartTime)
m_desiredFrameStartTime = time + currentDuration;
else {
m_desiredFrameStartTime += currentDuration;
// If we're too far behind, the user probably doesn't care about
// resyncing and we could burn a lot of time looping through frames
// below. Just reset the timings.
if ((time - m_desiredFrameStartTime) > cAnimationResyncCutoff)
m_desiredFrameStartTime = time + currentDuration;
}
if (time < m_desiredFrameStartTime) {
// Haven't yet reached time for next frame to start; delay until then.
m_frameTimer = new Timer<BitmapImage>(this, &BitmapImage::advanceAnimation);
m_frameTimer->startOneShot(m_desiredFrameStartTime - time);
} else {
// We've already reached or passed the time for the next frame to start.
// See if we've also passed the time for frames after that to start, in
// case we need to skip some frames entirely.
size_t nextFrame = (m_currentFrame + 1) % frameCount();
while (m_source.frameIsCompleteAtIndex(nextFrame)) {
// Should we skip the current frame?
double nextFrameStartTime = m_desiredFrameStartTime + frameDurationAtIndex(nextFrame);
if (time < nextFrameStartTime)
break;
// Yes; skip over it without notifying our observers.
if (!internalAdvanceAnimation(true))
return;
m_desiredFrameStartTime = nextFrameStartTime;
nextFrame = (nextFrame + 1) % frameCount();
}
// Draw the next frame immediately. Note that m_desiredFrameStartTime
// may be in the past, meaning the next time through this function we'll
// kick off the next advancement sooner than this frame's duration would
// suggest.
internalAdvanceAnimation(false);
}
}
void BitmapImage::startAnimation(bool catchUpIfNecessary)
{
if (m_frameTimer || !shouldAnimate() || frameCount() <= 1)
return;
// If we aren't already animating, set now as the animation start time.
const double time = monotonicallyIncreasingTime();
if (!m_desiredFrameStartTime)
m_desiredFrameStartTime = time;
// Don't advance the animation to an incomplete frame.
size_t nextFrame = (m_currentFrame + 1) % frameCount();
if (!m_allDataReceived && !frameIsCompleteAtIndex(nextFrame))
return;
// Don't advance past the last frame if we haven't decoded the whole image
// yet and our repetition count is potentially unset. The repetition count
// in a GIF can potentially come after all the rest of the image data, so
// wait on it.
if (!m_allDataReceived && repetitionCount(false) == cAnimationLoopOnce && m_currentFrame >= (frameCount() - 1))
return;
// Determine time for next frame to start. By ignoring paint and timer lag
// in this calculation, we make the animation appear to run at its desired
// rate regardless of how fast it's being repainted.
const double currentDuration = frameDurationAtIndex(m_currentFrame);
m_desiredFrameStartTime += currentDuration;
// When an animated image is more than five minutes out of date, the
// user probably doesn't care about resyncing and we could burn a lot of
// time looping through frames below. Just reset the timings.
const double cAnimationResyncCutoff = 5 * 60;
if ((time - m_desiredFrameStartTime) > cAnimationResyncCutoff)
m_desiredFrameStartTime = time + currentDuration;
// The image may load more slowly than it's supposed to animate, so that by
// the time we reach the end of the first repetition, we're well behind.
// Clamp the desired frame start time in this case, so that we don't skip
// frames (or whole iterations) trying to "catch up". This is a tradeoff:
// It guarantees users see the whole animation the second time through and
// don't miss any repetitions, and is closer to what other browsers do; on
// the other hand, it makes animations "less accurate" for pages that try to
// sync an image and some other resource (e.g. audio), especially if users
// switch tabs (and thus stop drawing the animation, which will pause it)
// during that initial loop, then switch back later.
if (nextFrame == 0 && m_repetitionsComplete == 0 && m_desiredFrameStartTime < time)
m_desiredFrameStartTime = time;
if (!catchUpIfNecessary || time < m_desiredFrameStartTime) {
// Haven't yet reached time for next frame to start; delay until then.
m_frameTimer = new Timer<BitmapImage>(this, &BitmapImage::advanceAnimation);
m_frameTimer->startOneShot(std::max(m_desiredFrameStartTime - time, 0.));
} else {
// We've already reached or passed the time for the next frame to start.
// See if we've also passed the time for frames after that to start, in
// case we need to skip some frames entirely. Remember not to advance
// to an incomplete frame.
for (size_t frameAfterNext = (nextFrame + 1) % frameCount(); frameIsCompleteAtIndex(frameAfterNext); frameAfterNext = (nextFrame + 1) % frameCount()) {
// Should we skip the next frame?
double frameAfterNextStartTime = m_desiredFrameStartTime + frameDurationAtIndex(nextFrame);
if (time < frameAfterNextStartTime)
break;
// Yes; skip over it without notifying our observers.
if (!internalAdvanceAnimation(true))
return;
m_desiredFrameStartTime = frameAfterNextStartTime;
nextFrame = frameAfterNext;
}
// Draw the next frame immediately. Note that m_desiredFrameStartTime
// may be in the past, meaning the next time through this function we'll
// kick off the next advancement sooner than this frame's duration would
// suggest.
if (internalAdvanceAnimation(false)) {
// The image region has been marked dirty, but once we return to our
// caller, draw() will clear it, and nothing will cause the
// animation to advance again. We need to start the timer for the
// next frame running, or the animation can hang. (Compare this
// with when advanceAnimation() is called, and the region is dirtied
// while draw() is not in the callstack, meaning draw() gets called
// to update the region and thus startAnimation() is reached again.)
// NOTE: For large images with slow or heavily-loaded systems,
// throwing away data as we go (see destroyDecodedData()) means we
// can spend so much time re-decoding data above that by the time we
// reach here we're behind again. If we let startAnimation() run
// the catch-up code again, we can get long delays without painting
// as we race the timer, or even infinite recursion. In this
// situation the best we can do is to simply change frames as fast
// as possible, so force startAnimation() to set a zero-delay timer
// and bail out if we're not caught up.
startAnimation(false);
}
}
}
bool BitmapImage::canAnimate()
{
return shouldAnimate() && frameCount() > 1;
}
void BitmapImage::startAnimation(CatchUpAnimation catchUpIfNecessary)
{
if (m_frameTimer || !shouldAnimate() || frameCount() <= 1)
return;
// If we aren't already animating, set now as the animation start time.
const double time = monotonicallyIncreasingTime();
if (!m_desiredFrameStartTime)
m_desiredFrameStartTime = time;
// Don't advance the animation to an incomplete frame.
size_t nextFrame = (m_currentFrame + 1) % frameCount();
if (!m_allDataReceived && !frameIsCompleteAtIndex(nextFrame))
return;
// Don't advance past the last frame if we haven't decoded the whole image
// yet and our repetition count is potentially unset. The repetition count
// in a GIF can potentially come after all the rest of the image data, so
// wait on it.
if (!m_allDataReceived && repetitionCount(false) == cAnimationLoopOnce && m_currentFrame >= (frameCount() - 1))
return;
// Determine time for next frame to start. By ignoring paint and timer lag
// in this calculation, we make the animation appear to run at its desired
// rate regardless of how fast it's being repainted.
const double currentDuration = frameDurationAtIndex(m_currentFrame);
m_desiredFrameStartTime += currentDuration;
#if !PLATFORM(IOS)
// When an animated image is more than five minutes out of date, the
// user probably doesn't care about resyncing and we could burn a lot of
// time looping through frames below. Just reset the timings.
const double cAnimationResyncCutoff = 5 * 60;
if ((time - m_desiredFrameStartTime) > cAnimationResyncCutoff)
m_desiredFrameStartTime = time + currentDuration;
#else
// Maintaining frame-to-frame delays is more important than
// maintaining absolute animation timing, so reset the timings each frame.
m_desiredFrameStartTime = time + currentDuration;
#endif
// The image may load more slowly than it's supposed to animate, so that by
// the time we reach the end of the first repetition, we're well behind.
// Clamp the desired frame start time in this case, so that we don't skip
// frames (or whole iterations) trying to "catch up". This is a tradeoff:
// It guarantees users see the whole animation the second time through and
// don't miss any repetitions, and is closer to what other browsers do; on
// the other hand, it makes animations "less accurate" for pages that try to
// sync an image and some other resource (e.g. audio), especially if users
// switch tabs (and thus stop drawing the animation, which will pause it)
// during that initial loop, then switch back later.
if (nextFrame == 0 && m_repetitionsComplete == 0 && m_desiredFrameStartTime < time)
m_desiredFrameStartTime = time;
if (catchUpIfNecessary == DoNotCatchUp || time < m_desiredFrameStartTime) {
// Haven't yet reached time for next frame to start; delay until then.
startTimer(std::max<double>(m_desiredFrameStartTime - time, 0));
return;
}
ASSERT(!m_frameTimer);
// We've already reached or passed the time for the next frame to start.
// See if we've also passed the time for frames after that to start, in
// case we need to skip some frames entirely. Remember not to advance
// to an incomplete frame.
#if !LOG_DISABLED
size_t startCatchupFrameIndex = nextFrame;
#endif
for (size_t frameAfterNext = (nextFrame + 1) % frameCount(); frameIsCompleteAtIndex(frameAfterNext); frameAfterNext = (nextFrame + 1) % frameCount()) {
// Should we skip the next frame?
double frameAfterNextStartTime = m_desiredFrameStartTime + frameDurationAtIndex(nextFrame);
if (time < frameAfterNextStartTime)
break;
// Yes; skip over it without notifying our observers. If we hit the end while catching up,
// tell the observer asynchronously.
if (!internalAdvanceAnimation(SkippingFramesToCatchUp)) {
m_animationFinishedWhenCatchingUp = true;
startTimer(0);
LOG(Images, "BitmapImage %p startAnimation catching up from frame %lu, ended", this, startCatchupFrameIndex);
return;
}
m_desiredFrameStartTime = frameAfterNextStartTime;
nextFrame = frameAfterNext;
}
LOG(Images, "BitmapImage %p startAnimation catching up jumped from from frame %lu to %d", this, startCatchupFrameIndex, (int)nextFrame - 1);
// Draw the next frame as soon as possible. Note that m_desiredFrameStartTime
// may be in the past, meaning the next time through this function we'll
// kick off the next advancement sooner than this frame's duration would suggest.
startTimer(0);
}
