void LadybugWidget::navigationMousePress(QMouseEvent* e)
{
QRect arrowRect = QRect(QPoint(-5, 0), QPoint(5, -10));
QPoint centerPt = NAVIGATION_RECT.center();
QMatrix m;
m.translate(centerPt.x(), centerPt.y());
for (int i = 0; i < 5; i++)
{
QMatrix m2 = m;
m2.rotate(i*360/5);
m2.translate(0,-16);
QPoint resPt = m2.inverted().map(e->pos());
if (arrowRect.contains(resPt))
{
// invert camera on/off setting
setCameraState(i, !cameraState(i));
if (mPaused)
updateVideo(getSingleFrame(mCurrentFrame));
}
}
}
void LadybugWidget::wheelEvent(QWheelEvent* e)
{
for (int cam = 0; cam < CAMERAS; cam++)
{
QRect r = cameraRect(cam);
if (r.contains(e->pos()))
{
QPointF oldOffset;
double oldZoom = cameraZoom(cam, &oldOffset);
// negative = zoom in
const double FACTOR = 1.25;
double zoom = oldZoom * (e->delta() > 0 ? 1/FACTOR : FACTOR);
if (zoom < 1) zoom = 1;
if (zoom > 4) zoom = 4;
if (zoom == oldZoom) return;
QPointF pos = (e->pos()-r.topLeft())/oldZoom;
QPointF newPos = pos * oldZoom/zoom;
QPointF offset = oldOffset + pos - newPos;
printf("delta %d | pos %.1f,%.1f | new_pos %.1f,%.1f | zoom %.2f | offset %.1f,%.1f\n", e->delta(), pos.x(),pos.y(), newPos.x(), newPos.y(), zoom, offset.x(), offset.y());
setCameraZoom(cam, zoom, offset);
if (mPaused)
updateVideo(getSingleFrame(mCurrentFrame));
break;
}
}
}
void LadybugWidget::mousePressEvent(QMouseEvent* e)
{
if (NAVIGATION_RECT.contains(e->pos()))
{
// handle navigation
navigationMousePress(e);
}
else
{
// handle images from cameras
// we're interested only to right click - reset zoom
if (e->button() != Qt::RightButton)
return;
for (int i = 0; i < CAMERAS; i++)
{
if (cameraRect(i).contains(e->pos()))
{
setCameraZoom(i, 1);
if (mPaused)
updateVideo(getSingleFrame(mCurrentFrame));
break;
}
}
}
}
void LadybugWidget::pause()
{
mPaused = !mPaused;
if (mPaused)
{
mTimer.stop();
mPlaybackStartTime = QTime();
// terminate thread
stopPlayerThread();
// make sure we're where we paused the video
updateVideo(getSingleFrame(mCurrentFrame));
}
else
{
// create thread, pass the stream
mThread = new LadybugPlayerThread(mStream);
mThread->setCameras(cameraMask());
mThread->start();
// in update routine: show frame + get next frame + run timer
updateVideoPlayback();
}
if (mPauseButton)
mPauseButton->setText(mPaused ? "|>" : "||");
}
void GameStateConfigDesktop::update() {
GameStateConfigBase::update();
updateVideo();
updateInput();
updateKeybinds();
}
void VideoEditor::saveVideo(){
updateVideo();
workspace::Workspace::getInstance()->save_note("video",video->getId());
QMessageBox::information(this, "Save","Your video has been saved.");
ui->pushButtonSave->setEnabled(false);
ui->pushButtonDelete->setEnabled(true);
}
void LadybugWidget::seekToTime(uint msecs)
{
mStream.seekToTime(msecs);
int frameId = mStream.currentFrame();
printf("frame id: %d\n", frameId);
if (mPaused)
{
updateVideo(getSingleFrame(frameId));
}
else
{
//mThread->seekToFrame(frameId);
pause();
updateVideo(getSingleFrame(frameId));
pause();
}
update();
}
void LadybugWidget::seekToFrame(int frameId)
{
if (frameId < 0)
frameId = 0;
if (frameId == mCurrentFrame)
return;
printf("SEEK! %d\n", frameId);
if (mPaused)
{
updateVideo(getSingleFrame(frameId));
}
else
{
//mThread->seekToFrame(frameId);
pause();
updateVideo(getSingleFrame(frameId));
pause();
}
update();
}
bool LadybugWidget::openStream(QString baseName)
{
bool res = mStream.openForReading(baseName);
if (!res)
return false;
if (mSlider)
mSlider->setRange(0, mStream.framesCount()-1);
// show first frame
LadybugPlayerFrame f = getSingleFrame(0);
mStartTime = f.time;
updateVideo(f);
return true;
}
void LadybugWidget::keyPressEvent(QKeyEvent* e)
{
if (e->key() >= Qt::Key_1 && e->key() <= Qt::Key_5)
{
int i = e->key()-Qt::Key_1;
// invert camera on/off setting
setCameraState(i, !cameraState(i));
if (mPaused)
updateVideo(getSingleFrame(mCurrentFrame));
}
switch (e->key())
{
case Qt::Key_Space:
pause();
break;
case Qt::Key_Left:
seekToFrame(mCurrentFrame-1);
break;
case Qt::Key_Right:
seekToFrame(mCurrentFrame+1);
break;
case Qt::Key_Home:
seekToFrame(0);
break;
case Qt::Key_End:
seekToFrame(mStream.framesCount()-1);
break;
case Qt::Key_PageUp:
seekToFrame(mCurrentFrame-25);
break;
case Qt::Key_PageDown:
seekToFrame(mCurrentFrame+25);
break;
// %%% seek to random position (for testing)
case Qt::Key_S:
{
uint msecs = rand() % (mStream.framesCount() / 15 * 1000);
printf("RANDOM TIME SEEK! %d ms\n", msecs);
seekToTime(msecs);
break;
}
}
}
void LadybugWidget::updateVideoPlayback()
{
if (mPlaybackStartTime.isNull())
{
// we're starting playback
mPlaybackStartTime.start();
mPlaybackFirstFrameTime = mCurrentTime;
}
else
{
// draw prepared frame
updateVideo(*mNextFrame);
}
// get next frame
*mNextFrame = mThread->getFrame();
if (mNextFrame->frameId == -1)
{
// the thread has finished... we're pausing!
pause();
return;
}
// find out waiting time + run timer
int timeElapsed = mPlaybackStartTime.elapsed();
int timeNext = (mNextFrame->time - mPlaybackFirstFrameTime);
int waitTime = timeNext-timeElapsed;
printf("wait time %d\n", waitTime);
// make sure we set a valid interval
if (waitTime <= 0)
waitTime = 1;
mTimer.start(waitTime);
}
void MC6845::scheduleTimer(OESLong cycles)
{
updateVideo();
if (imageModified)
{
imageModified = false;
if (videoEnabled)
postImage();
}
if ((powerState == CONTROLBUS_POWERSTATE_ON) && blinkEnabled)
{
blinkCount++;
if (blinkCount >= blinkFrameNum)
{
blink = !blink;
blinkCount = 0;
refreshVideo();
}
}
controlBus->postMessage(this, CONTROLBUS_GET_CYCLES, &frameStart);
frameStart += cycles;
ControlBusTimer timer = { cycles + ceil(frameCycleNum / clockMultiplier), 0 };
controlBus->postMessage(this, CONTROLBUS_SCHEDULE_TIMER, &timer);
if (frameStartAddress.w.l != startAddress.w.l)
refreshVideo();
frameStartAddress.w = startAddress.w;
}
//--------------------------------------------------------------
void testApp::update(){
//Check for new text message
char textMessage[100000];
textMessageConnection.Receive(textMessage, 100000);
if (textMessage[0] != 0) {
string grt = textMessage;
messages.push_back(grt);
messageSent.push_back(0);
messagePositions.push_back(0);
}
//Check for new trigger message
char triggerInMessage[10];
triggerInConnection.Receive(triggerInMessage, 10);
int tm;
tm = atoi(triggerInMessage); //Char to Int
if (tm == 1 || tm == 3 || tm == 4 || tm == 5) { //Show State Trigger
//showState += 1;
showState = tm;
}
if (tm == 6){ //Record Trigger
record = 1;
}
if (tm == 7){
getBackground = true;
}
//Show management
if (showState > 4) { // Check at beginning of update because multiple functions use this
showState = 0;
}
if (showState == 0 ) {
hold = 0;
end = 0;
play = 0;
messages.clear();
messagePositions.clear();
messageSent.clear();
}
//Reset show variables
if (showState == 1) {
messages.clear();
messagePositions.clear();
for(int i = 0; i < flock.boids.size(); i ++){
flock.boids[i].setLoc(ofVec2f(ofRandom(-100, -700),ofRandom(200,700)));
}
if (showBoidsHead > nrDisplaySequences) {
showBoidsTail = showBoidsHead - nrDisplaySequences;
}
showBoids = true;
showState += 1;
}
//Bring flock of video onscreen
if (showState == 2) {
play = 1;
if (pan < 0) {
pan -= pan/100;
}
}
//Flock flies around
if (showState == 3) {
hold = 1;
}
//Flock leaves screen
if (showState == 4) {
if(pan < ofGetWidth()){
pan += pan/100;
}
if (pan > ofGetWidth()) {
showState+= 1;
}
showBoids = false;
}
updateVideo();
}
//--------------------------------------------------------------
void ofxThreadedVideo::threadedFunction(){
while (isThreadRunning()){
if(lock()){
// if there's a movie to load...
if(loadPath != ""){
loadVideoID = getNextLoadID();
paths[loadVideoID] = loadPath;
loadPath = "";
#ifdef TARGET_OSX
vector<string> pathParts = ofSplitString(paths[loadVideoID], "/");
#else
vector<string> pathParts = ofSplitString(paths[loadVideoID], "\\");
#endif
names[loadVideoID] = pathParts[pathParts.size() - 1];
// using a static mutex blocks all threads (including the main app) until we've loaded
ofxThreadedVideoMutex.lock();
// load that movie!
if(videos[loadVideoID].loadMovie(paths[loadVideoID])){
ofLogVerbose() << "Loaded" << names[loadVideoID] << " " << loadVideoID;
// start rolling if AutoPlay is true
if (bUseAutoPlay) videos[loadVideoID].play();
// set pixel refs
pixels[loadVideoID] = &videos[loadVideoID].getPixelsRef();
}else{
ofLogVerbose() << "Could not load video";
loadVideoID = VIDEO_NONE;
// send event notification
ofxThreadedVideoEvent videoEvent = ofxThreadedVideoEvent(paths[loadVideoID], VIDEO_EVENT_LOAD_FAIL, this);
ofNotifyEvent(threadedVideoEvent, videoEvent, this);
}
ofxThreadedVideoMutex.unlock();
}
// do threaded update of videos
updateVideo(currentVideoID);
updateVideo(loadVideoID);
unlock();
// sleep a bit so we don't thrash the cores!!
ofSleepMillis(1000/30); // TODO: implement target frame rate? US might need 30 here?
}
}
}
MainWindow::MainWindow(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::MainWindow)
{
ui->setupUi(this);
_marker_detector.setMinMaxSize(0.0001,0.5);
ui->cameraResolutionComboBox->addItem("640x480");
ui->cameraResolutionComboBox->addItem("1920x1080");
_serial_port = new QSerialPort();
refreshSerialPortOptions();
connect(ui->serialConnectButton,SIGNAL(clicked()),SLOT(updateSerialPort()));
connect(ui->serialDisconnectButton,SIGNAL(clicked()),SLOT(disconnectSerialPort()));
connect(_serial_port,SIGNAL(readyRead()),SLOT(receiveData()));
connect(ui->sendSerialDataButton,SIGNAL(clicked()),SLOT(sendTextEditSerialData()));
connect(ui->sendSerialDataLineEdit,SIGNAL(returnPressed()),SLOT(sendTextEditSerialData()));
connect(ui->refreshSerialOptionsButton,SIGNAL(clicked()),SLOT(refreshSerialPortOptions()));
loadDefaultSettings();
//applySettings();
//Timer connects to the kcamera object to call grabFrame every 30 milliseconds
_timer = new QTimer(this);
connect(_timer,SIGNAL(timeout()),SLOT(update()));
_timer->start(20);
//Update video every 20ms
QTimer* video_timer = new QTimer(this);
connect(video_timer,SIGNAL(timeout()),SLOT(updateVideo()));
video_timer->start(20);
connect(ui->applySettingsButton,SIGNAL(clicked()),SLOT(applySettings()));
QFileDialog* file_dialog = new QFileDialog();
connect(file_dialog,SIGNAL(fileSelected(QString)),ui->calibrationFileLineEdit,SLOT(setText(QString)));
connect(ui->browseCalibrationFileButton,SIGNAL(clicked()),file_dialog,SLOT(open()));
//Connections for selecting view (image/2D trace)
connect(ui->viewSelectComboBox,SIGNAL(currentIndexChanged(QString)),SLOT(selectView(QString)));
connect(ui->saveSentDataButton,SIGNAL(clicked()),SLOT(saveSentData()));
connect(ui->clearSentDataButton,SIGNAL(clicked()),SLOT(clearSentData()));
ui->markerTracePlot->addGraph();
ui->markerTracePlot->graph(0)->addData(1.5,1.5);
ui->markerTracePlot->graph(0)->addData(1.9,1.9);
ui->markerTracePlot->graph(0)->addData(1.5,1.9);
ui->markerTracePlot->graph(0)->setScatterStyle(QCPScatterStyle::ssCross);
ui->markerTracePlot->replot();
_running = false;
_frame_count = 0;
connect(ui->startRunButton,SIGNAL(clicked()),this,SLOT(startRun()));
connect(ui->stopRunButton,SIGNAL(clicked()),this,SLOT(stopRun()));
_received_data_max_length = 1000;
_sent_data_max_length = 1000;
//Camera Sliders
connect(ui->brightnessSlider, SIGNAL(valueChanged(int)), this, SLOT(updateBrightness(int)));
connect(ui->sharpnessSlider, SIGNAL(valueChanged(int)), this, SLOT(updateSharpness(int)));
connect(ui->autofocusCheckbox, SIGNAL(toggled(bool)), this, SLOT(updateAutoFocus(bool)));
connect(ui->focusSlider, SIGNAL(valueChanged(int)), this, SLOT(updateFocus(int)));
}
void MC6845::refreshVideo()
{
updateVideo();
pendingCycles = frameCycleNum;
}