FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString,
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() )
{
m_showBorderAndTitleBlock = false; // true to show the frame references
m_showAxis = true; // true to show X and Y axis on screen
m_showGridAxis = true; // show the grid origin axis
m_hotkeysDescrList = g_Module_Editor_Hokeys_Descr;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) );
SetIcon( icon );
// Show a title (frame title + footprint name):
updateTitle();
// Create GAL canvas
PCB_BASE_FRAME* parentFrame = static_cast<PCB_BASE_FRAME*>( Kiway().Player( FRAME_PCB, true ) );
PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
parentFrame->GetGalCanvas()->GetBackend() );
SetGalCanvas( drawPanel );
SetBoard( new BOARD() );
// In modedit, the default net clearance is not known.
// (it depends on the actual board)
// So we do not show the default clearance, by setting it to 0
// The footprint or pad specific clearance will be shown
GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0);
// restore the last footprint from the project, if any
restoreLastFootprint();
// Ensure all layers and items are visible:
// In footprint editor, some layers have no meaning or
// cannot be used, but we show all of them, at least to be able
// to edit a bad layer
GetBoard()->SetVisibleAlls();
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), font.GetPointSize(), true );
LoadSettings( config() );
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
GetScreen()->SetCurItem( NULL );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// In modedit, set the default paper size to A4:
// this should be OK for all footprint to plot/print
SetPageSettings( PAGE_INFO( PAGE_INFO::A4 ) );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg_pane;
mesg_pane.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// LAYER_WIDGET is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget
lyrs.BestSize( m_Layers->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
// The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) );
// Add the layer manager ( most right side of pcbframe )
m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 2 ) );
// Layers manager is visible
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( true );
// The left vertical toolbar (fast acces to display options)
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
// Create the manager and dispatcher & route draw panel events to the dispatcher
setupTools();
UseGalCanvas( parentFrame->IsGalCanvasActive() );
if( m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).IsShown() )
{
m_Layers->ReFill();
m_Layers->ReFillRender();
GetScreen()->m_Active_Layer = F_SilkS;
m_Layers->SelectLayer( F_SilkS );
m_Layers->OnLayerSelected();
}
m_auimgr.Update();
Raise(); // On some window managers, this is needed
Show( true );
Zoom_Automatique( false );
}
PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB, wxT( "Pcbnew" ), wxDefaultPosition,
wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PCB_EDIT_FRAME_NAME )
{
m_showBorderAndTitleBlock = true; // true to display sheet references
m_showAxis = false; // true to display X and Y axis
m_showOriginAxis = true;
m_showGridAxis = true;
m_SelTrackWidthBox = NULL;
m_SelViaSizeBox = NULL;
m_SelLayerBox = NULL;
m_show_microwave_tools = false;
m_show_layer_manager_tools = true;
m_hotkeysDescrList = g_Board_Editor_Hokeys_Descr;
m_hasAutoSave = true;
m_microWaveToolBar = NULL;
m_rotationAngle = 900;
// Create GAL canvas
EDA_DRAW_PANEL_GAL* galCanvas = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ),
m_FrameSize,
GetGalDisplayOptions(),
EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE );
SetGalCanvas( galCanvas );
SetBoard( new BOARD() );
// Create the PCB_LAYER_WIDGET *after* SetBoard():
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
int pointSize = font.GetPointSize();
int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y );
// printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 );
if( screenHeight <= 900 )
pointSize = (pointSize * 8) / 10;
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize );
m_drc = new DRC( this ); // these 2 objects point to each other
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) );
SetIcon( icon );
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings( config() );
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
// PCB drawings start in the upper left corner.
GetScreen()->m_Center = false;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
ReCreateMicrowaveVToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// LAYER_WIDGET is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget
lyrs.BestSize( m_Layers->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
lyrs.TopDockable( false ).BottomDockable( false );
if( m_mainToolBar ) // The main horizontal toolbar
{
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
}
if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...)
{
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
}
if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools)
m_auimgr.AddPane( m_microWaveToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ).
Right().Layer( 1 ).Position(1).Hide() );
if( m_drawToolBar ) // The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) );
// Add the layer manager ( most right side of pcbframe )
m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) );
if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew)
{
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) );
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
}
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( GetGalCanvas() )
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
ReFillLayerWidget(); // this is near end because contents establish size
m_Layers->ReFillRender(); // Update colors in Render after the config is read
syncLayerWidgetLayer();
m_auimgr.Update();
setupTools();
Zoom_Automatique( false );
EDA_DRAW_PANEL_GAL::GAL_TYPE canvasType = LoadCanvasTypeSetting();
if( canvasType != EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE )
{
if( GetGalCanvas()->SwitchBackend( canvasType ) )
UseGalCanvas( true );
}
enableGALSpecificMenus();
// disable Export STEP item if kicad2step does not exist
wxString strK2S = Pgm().GetExecutablePath();
#ifdef __WXMAC__
strK2S += "Contents/MacOS/";
#endif
wxFileName appK2S( strK2S, "kicad2step" );
#ifdef _WIN32
appK2S.SetExt( "exe" );
#endif
if( !appK2S.FileExists() )
GetMenuBar()->FindItem( ID_GEN_EXPORT_FILE_STEP )->Enable( false );
}
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString,
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() )
{
m_FrameName = GetFootprintEditorFrameName();
m_showBorderAndTitleBlock = false; // true to show the frame references
m_showAxis = true; // true to show X and Y axis on screen
m_showGridAxis = true; // show the grid origin axis
m_HotkeysZoomAndGridList = g_Module_Editor_Hokeys_Descr;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) );
SetIcon( icon );
// Show a title (frame title + footprint name):
updateTitle();
if( !s_Pcb )
{
s_Pcb = new BOARD();
// Ensure all layers and items are visible:
s_Pcb->SetVisibleAlls();
}
SetBoard( s_Pcb );
if( !s_screenModule )
s_screenModule = new PCB_SCREEN( GetPageSettings().GetSizeIU() );
SetScreen( s_screenModule );
GetScreen()->SetCurItem( NULL );
LoadSettings( config() );
GetBoard()->SetVisibleAlls();
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// In modedit, set the default paper size to A4:
// this should be OK for all footprint to plot/print
SetPageSettings( PAGE_INFO::A4 );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg_pane;
mesg_pane.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
// The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) );
// The left vertical toolbar (fast acces to display options)
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.Update();
}
GERBVIEW_FRAME::GERBVIEW_FRAME( KIWAY* aKiway, wxWindow* aParent ):
EDA_DRAW_FRAME( aKiway, aParent, FRAME_GERBER, wxT( "GerbView" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GERBVIEW_FRAME_NAME )
{
m_colorsSettings = &g_ColorsSettings;
m_gerberLayout = NULL;
m_zoomLevelCoeff = ZOOM_FACTOR( 110 ); // Adjusted to roughly displays zoom level = 1
// when the screen shows a 1:1 image
// obviously depends on the monitor,
// but this is an acceptable value
PAGE_INFO pageInfo( wxT( "GERBER" ) );
SetPageSettings( pageInfo );
m_show_layer_manager_tools = true;
m_showAxis = true; // true to show X and Y axis on screen
m_showBorderAndTitleBlock = false; // true for reference drawings.
m_HotkeysZoomAndGridList = GerbviewHokeysDescr;
m_SelLayerBox = NULL;
m_DCodeSelector = NULL;
m_displayMode = 0;
m_drillFileHistory.SetBaseId( ID_GERBVIEW_DRILL_FILE1 );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_gerbview_xpm ) );
SetIcon( icon );
SetLayout( new GBR_LAYOUT() );
SetVisibleLayers( -1 ); // All draw layers visible.
SetScreen( new GBR_SCREEN( GetPageSettings().GetSizeIU() ) );
// Create the PCB_LAYER_WIDGET *after* SetLayout():
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
int pointSize = font.GetPointSize();
int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y );
if( screenHeight <= 900 )
pointSize = (pointSize * 8) / 10;
m_LayersManager = new GERBER_LAYER_WIDGET( this, m_canvas, pointSize );
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
if( m_LastGridSizeId < 0 )
m_LastGridSizeId = 0;
if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateOptToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// the Layers Manager is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_LayersManager->GetBestSize() );
lyrs.BestSize( m_LayersManager->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
lyrs.TopDockable( false ).BottomDockable( false );
if( m_mainToolBar )
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
if( m_drawToolBar )
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) );
m_auimgr.AddPane( m_LayersManager,
lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 0 ) );
if( m_optionsToolBar )
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) );
ReFillLayerWidget(); // this is near end because contents establish size
m_LayersManager->ReFillRender(); // Update colors in Render after the config is read
m_auimgr.Update();
setActiveLayer( 0, true );
Zoom_Automatique( false ); // Gives a default zoom value
}
LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_LIB_EDITOR, _( "Library Editor" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, LIB_EDIT_FRAME_NAME )
{
m_showAxis = true; // true to draw axis
SetShowDeMorgan( false );
m_drawSpecificConvert = true;
m_drawSpecificUnit = false;
m_hotkeysDescrList = g_Libedit_Hokeys_Descr;
m_editPinsPerPartOrConvert = false;
m_repeatPinStep = DEFAULT_REPEAT_OFFSET_PIN;
m_my_part = NULL;
m_tempCopyComponent = NULL;
// Delayed initialization
if( m_textSize == -1 )
m_textSize = GetDefaultTextSize();
// Initialize grid id to the default value 50 mils:
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( libedit_icon_xpm ) );
SetIcon( icon );
LoadSettings( config() );
SetScreen( new SCH_SCREEN( aKiway ) );
GetScreen()->m_Center = true;
GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Ensure m_LastGridSizeId is an offset inside the allowed schematic range
if( m_LastGridSizeId < ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
// Ensure the current alias name is valid if a part is loaded
// Sometimes it is not valid. This is the case
// when a part value (the part lib name), or the alias list was modified
// during a previous session and the modifications not saved in lib.
// Reopen libedit in a new session gives a non valid m_aliasName
// because the curr part is reloaded from the library (and this is the unmodified part)
// and the old alias name (from the previous edition) can be invalid
LIB_PART* part = GetCurPart();
if( part == NULL )
m_aliasName.Empty();
else if( m_aliasName != part->GetName() )
{
LIB_ALIAS* alias = part->GetAlias( m_aliasName );
if( !alias )
m_aliasName = part->GetName();
}
CreateOptionToolbar();
DisplayLibInfos();
DisplayCmpDoc();
UpdateAliasSelectList();
UpdatePartSelectList();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() );
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.Update();
Raise();
Show( true );
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED, ID_ZOOM_PAGE );
wxPostEvent( this, evt );
}
LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType,
CMP_LIBRARY* aLibrary ) :
SCH_BASE_FRAME( aKiway, aParent, aFrameType, _( "Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType==FRAME_SCH_VIEWER ?
KICAD_DEFAULT_DRAWFRAME_STYLE :
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT,
GetLibViewerFrameName() )
{
wxASSERT( aFrameType==FRAME_SCH_VIEWER || aFrameType==FRAME_SCH_VIEWER_MODAL );
if( aFrameType == FRAME_SCH_VIEWER_MODAL )
SetModal( true );
wxAcceleratorTable table( ACCEL_TABLE_CNT, accels );
m_FrameName = GetLibViewerFrameName();
m_configPath = wxT( "LibraryViewer" );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( library_browse_xpm ) );
SetIcon( icon );
m_HotkeysZoomAndGridList = s_Viewlib_Hokeys_Descr;
m_cmpList = NULL;
m_libList = NULL;
SetScreen( new SCH_SCREEN() );
GetScreen()->m_Center = true; // Axis origin centered on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
// Initialize grid id to the default value (50 mils):
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateHToolbar();
ReCreateVToolbar();
wxSize size = GetClientSize();
size.y -= m_MsgFrameHeight + 2;
wxPoint win_pos( 0, 0 );
if( !aLibrary )
{
// Creates the libraries window display
m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST,
wxPoint( 0, 0 ), wxSize(m_libListWidth, -1),
0, NULL, wxLB_HSCROLL );
}
else
{
m_libraryName = aLibrary->GetName();
m_entryName.Clear();
m_unit = 1;
m_convert = 1;
m_libListWidth = 0;
}
// Creates the component window display
win_pos.x = m_libListWidth;
m_cmpList = new wxListBox( this, ID_LIBVIEW_CMP_LIST,
wxPoint( 0, 0 ), wxSize(m_cmpListWidth, -1),
0, NULL, wxLB_HSCROLL );
if( m_libList )
ReCreateListLib();
DisplayLibInfos();
if( m_canvas )
m_canvas->SetAcceleratorTable( table );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbal
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) );
// Manage the left window (list of libraries)
if( m_libList )
m_auimgr.AddPane( m_libList, wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) ).
Left().Row( 0 ) );
// Manage the list of components)
m_auimgr.AddPane( m_cmpList,
wxAuiPaneInfo( info ).Name( wxT( "m_cmpList" ) ).
Left().Row( 1 ) );
// Manage the draw panel
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
// Manage the message panel
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
/* Now the minimum windows are fixed, set library list
* and component list of the previous values from last viewlib use
*/
if( m_libList )
{
m_auimgr.GetPane( m_libList ).MinSize( wxSize( 80, -1) );
m_auimgr.GetPane( m_libList ).BestSize( wxSize(m_libListWidth, -1) );
}
m_auimgr.GetPane( m_cmpList ).MinSize( wxSize( 80, -1) );
m_auimgr.GetPane( m_cmpList ).BestSize(wxSize(m_cmpListWidth, -1) );
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
Show( true );
}
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( PCB_EDIT_FRAME* aParent,
const wxString& title,
const wxPoint& pos,
const wxSize& size,
long style ) :
PCB_BASE_FRAME( aParent, MODULE_EDITOR_FRAME, wxEmptyString, pos, size, style )
{
m_FrameName = wxT( "ModEditFrame" );
m_showBorderAndTitleBlock = false; // true to show the frame references
m_showAxis = true; // true to show X and Y axis on screen
m_showGridAxis = true; // show the grid origin axis
m_HotkeysZoomAndGridList = g_Module_Editor_Hokeys_Descr;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) );
SetIcon( icon );
UpdateTitle();
if( !s_Pcb )
{
s_Pcb = new BOARD();
// Ensure all layers and items are visible:
s_Pcb->SetVisibleAlls();
}
SetBoard( s_Pcb );
if( !s_screenModule )
s_screenModule = new PCB_SCREEN( GetPageSettings().GetSizeIU() );
SetScreen( s_screenModule );
GetScreen()->SetCurItem( NULL );
LoadSettings();
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg_pane;
mesg_pane.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() );
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left() );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.Update();
}
DISPLAY_FOOTPRINTS_FRAME::DISPLAY_FOOTPRINTS_FRAME( KIWAY* aKiway, CVPCB_MAINFRAME* aParent ) :
PCB_BASE_FRAME( aKiway, aParent, FRAME_CVPCB_DISPLAY, _( "Footprint Viewer" ),
wxDefaultPosition, wxDefaultSize,
KICAD_DEFAULT_DRAWFRAME_STYLE, FOOTPRINTVIEWER_FRAME_NAME )
{
m_showAxis = true; // true to draw axis.
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_cvpcb_xpm ) );
SetIcon( icon );
SetBoard( new BOARD() );
SetScreen( new PCB_SCREEN( GetPageSizeIU() ) );
LoadSettings( config() );
// Initialize grid id to a default value if not found in config or incorrect:
if( !( GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) ) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
// Initialize some display options
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
displ_opts->m_DisplayPadIsol = false; // Pad clearance has no meaning here
// Track and via clearance has no meaning here.
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) );
if( m_drawToolBar ) // Currently, no vertical right toolbar.
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right() );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DisplayFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
m_auimgr.Update();
Show( true );
}
GERBVIEW_FRAME::GERBVIEW_FRAME( wxWindow* aParent, const wxString& aTitle,
const wxPoint& aPosition, const wxSize& aSize,
long aStyle ) :
EDA_DRAW_FRAME( aParent, GERBER_FRAME_TYPE, aTitle, aPosition, aSize,
aStyle, GERBVIEW_FRAME_NAME )
{
m_colorsSettings = &g_ColorsSettings;
m_gerberLayout = NULL;
m_FrameName = GERBVIEW_FRAME_NAME;
m_show_layer_manager_tools = true;
m_showAxis = true; // true to show X and Y axis on screen
m_showBorderAndTitleBlock = false; // true for reference drawings.
m_HotkeysZoomAndGridList = s_Gerbview_Hokeys_Descr;
m_SelLayerBox = NULL;
m_DCodeSelector = NULL;
m_displayMode = 0;
m_drillFileHistory.SetBaseId( ID_GERBVIEW_DRILL_FILE1 );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_gerbview_xpm ) );
SetIcon( icon );
SetLayout( new GBR_LAYOUT() );
SetVisibleLayers( FULL_LAYERS ); // All 32 layers visible.
SetScreen( new GBR_SCREEN( GetGerberLayout()->GetPageSettings().GetSizeIU() ) );
// Create the PCB_LAYER_WIDGET *after* SetLayout():
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
int pointSize = font.GetPointSize();
int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y );
if( screenHeight <= 900 )
pointSize = (pointSize * 8) / 10;
m_LayersManager = new GERBER_LAYER_WIDGET( this, m_canvas, pointSize );
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings();
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
if( m_LastGridSizeId < 0 )
m_LastGridSizeId = 0;
if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateOptToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_LayersManager->GetBestSize() );
lyrs.BestSize( m_LayersManager->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
if( m_mainToolBar )
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
if( m_drawToolBar )
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) );
m_auimgr.AddPane( m_LayersManager,
lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 0 ) );
if( m_optionsToolBar )
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) );
ReFillLayerWidget(); // this is near end because contents establish size
m_LayersManager->ReFillRender(); // Update colors in Render after the config is read
m_auimgr.Update();
}
PL_EDITOR_FRAME::PL_EDITOR_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
EDA_DRAW_FRAME( aKiway, aParent, FRAME_PL_EDITOR, wxT( "PlEditorFrame" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PL_EDITOR_FRAME_NAME )
{
m_zoomLevelCoeff = 290.0; // Adjusted to roughly displays zoom level = 1
// when the screen shows a 1:1 image
// obviously depends on the monitor,
// but this is an acceptable value
m_showAxis = false; // true to show X and Y axis on screen
m_showGridAxis = true;
m_showBorderAndTitleBlock = true; // true for reference drawings.
m_hotkeysDescrList = PlEditorHokeysDescr;
m_originSelectChoice = 0;
SetDrawBgColor( WHITE ); // default value, user option (WHITE/BLACK)
SetShowPageLimits( true );
m_designTreeWidth = 150;
m_propertiesFrameWidth = 200;
if( m_canvas )
m_canvas->SetEnableBlockCommands( false );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pagelayout_editor_xpm ) );
SetIcon( icon );
wxSize pageSizeIU = GetPageLayout().GetPageSettings().GetSizeIU();
SetScreen( new PL_EDITOR_SCREEN( pageSizeIU ) );
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
if( ! GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1MM - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateOptToolbar();
wxWindow* stsbar = GetStatusBar();
int dims[] = {
// balance of status bar on far left is set to a default or whatever is left over.
-1,
// When using GetTextSize() remember the width of '1' is not the same
// as the width of '0' unless the font is fixed width, and it usually won't be.
// zoom:
GetTextSize( wxT( "Z 762000" ), stsbar ).x + 10,
// cursor coords
GetTextSize( wxT( "X 0234.567 Y 0234.567" ), stsbar ).x + 10,
// delta distances
GetTextSize( wxT( "dx 0234.567 dx 0234.567" ), stsbar ).x + 10,
// Coord origin (use the bigger message)
GetTextSize( _( "coord origin: Right Bottom page corner" ), stsbar ).x + 10,
// units display, Inches is bigger than mm
GetTextSize( _( "Inches" ), stsbar ).x + 10
};
SetStatusWidths( DIM( dims ), dims );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_propertiesPagelayout = new PROPERTIES_FRAME( this );
EDA_PANEINFO props;
props.LayersToolbarPane();
props.MinSize( m_propertiesPagelayout->GetMinSize() );
props.BestSize( m_propertiesFrameWidth, -1 );
props.Caption( _( "Properties" ) );
m_treePagelayout = new DESIGN_TREE_FRAME( this );
EDA_PANEINFO tree;
tree.LayersToolbarPane();
tree.MinSize( m_treePagelayout->GetMinSize() );
tree.BestSize( m_designTreeWidth, -1 );
tree.Caption( _( "Design" ) );
if( m_mainToolBar )
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
if( m_drawToolBar )
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) );
m_auimgr.AddPane( m_propertiesPagelayout,
props.Name( wxT( "m_propertiesPagelayout" ) ).Right().Layer( 1 ) );
m_auimgr.AddPane( m_treePagelayout,
tree.Name( wxT( "m_treePagelayout" ) ).Left().Layer( 0 ) );
if( m_optionsToolBar )
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane().Layer( 5 ) );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) );
m_auimgr.Update();
// Initialize the current page layout
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
#if 0 //start with empty layout
pglayout.AllowVoidList( true );
pglayout.ClearList();
#else // start with the default Kicad layout
pglayout.SetPageLayout();
#endif
OnNewPageLayout();
}
SCH_EDIT_FRAME::SCH_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ):
SCH_BASE_FRAME( aKiway, aParent, SCHEMATIC_FRAME_TYPE, wxT( "Eeschema" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, SCH_EDIT_FRAME_NAME ),
m_item_to_repeat( 0 )
{
m_FrameName = SCH_EDIT_FRAME_NAME;
m_showAxis = false; // true to show axis
m_showBorderAndTitleBlock = true; // true to show sheet references
m_CurrentSheet = new SCH_SHEET_PATH();
m_TextFieldSize = DEFAULT_SIZE_TEXT;
m_DefaultSchematicFileName = NAMELESS_PROJECT;
m_DefaultSchematicFileName += wxT( ".sch" );
m_showAllPins = false;
m_previewPosition = wxDefaultPosition;
m_previewSize = wxDefaultSize;
m_printMonochrome = true;
m_printSheetReference = true;
m_HotkeysZoomAndGridList = s_Schematic_Hokeys_Descr;
m_dlgFindReplace = NULL;
m_findReplaceData = new wxFindReplaceData( wxFR_DOWN );
m_undoItem = NULL;
m_hasAutoSave = true;
SetForceHVLines( true );
SetDefaultLabelSize( DEFAULT_SIZE_TEXT );
CreateScreens();
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_eeschema_xpm ) );
SetIcon( icon );
// Initialize grid id to the default value (50 mils):
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
LoadSettings( config() );
// Ensure m_LastGridSizeId is an offset inside the allowed schematic range
if( m_LastGridSizeId < ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
// Initialize common print setup dialog settings.
m_pageSetupData.GetPrintData().SetPrintMode( wxPRINT_MODE_PRINTER );
m_pageSetupData.GetPrintData().SetQuality( wxPRINT_QUALITY_MEDIUM );
m_pageSetupData.GetPrintData().SetBin( wxPRINTBIN_AUTO );
m_pageSetupData.GetPrintData().SetNoCopies( 1 );
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
if( m_mainToolBar )
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
if( m_drawToolBar )
m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right() );
if( m_optionsToolBar )
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
if( m_canvas )
m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().
Layer(10) );
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
GetScreen()->SetZoom( BestZoom() );
}
LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_LIB_EDITOR, _( "Library Editor" ),
wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetLibEditFrameName() )
{
wxASSERT( aParent );
m_FrameName = GetLibEditFrameName();
m_showAxis = true; // true to draw axis
m_configPath = wxT( "LibraryEditor" );
SetShowDeMorgan( false );
m_drawSpecificConvert = true;
m_drawSpecificUnit = false;
m_tempCopyComponent = NULL;
m_HotkeysZoomAndGridList = s_Libedit_Hokeys_Descr;
m_editPinsPerPartOrConvert = false;
// Delayed initialization
if( m_textSize == -1 )
m_textSize = GetDefaultTextSize();
// Initialize grid id to the default value 50 mils:
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( libedit_icon_xpm ) );
SetIcon( icon );
SetScreen( new SCH_SCREEN() );
GetScreen()->m_Center = true;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadSettings( config() );
// Ensure m_LastGridSizeId is an offset inside the allowed schematic range
if( m_LastGridSizeId < ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000 )
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
EnsureActiveLibExists();
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
CreateOptionToolbar();
DisplayLibInfos();
DisplayCmpDoc();
UpdateAliasSelectList();
UpdatePartSelectList();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() );
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() );
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
m_auimgr.Update();
Show( true );
wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED, ID_ZOOM_PAGE );
wxPostEvent( this, evt );
}
LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType,
PART_LIB* aLibrary ) :
SCH_BASE_FRAME( aKiway, aParent, aFrameType, _( "Library Browser" ),
wxDefaultPosition, wxDefaultSize,
aFrameType==FRAME_SCH_VIEWER_MODAL ?
#ifdef __WINDOWS__
KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP
#else
aParent ? KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT
: KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP
#endif
: KICAD_DEFAULT_DRAWFRAME_STYLE,
aFrameType == FRAME_SCH_VIEWER_MODAL ?
LIB_VIEW_FRAME_NAME_MODAL : LIB_VIEW_FRAME_NAME )
{
wxASSERT( aFrameType == FRAME_SCH_VIEWER || aFrameType == FRAME_SCH_VIEWER_MODAL );
if( aFrameType == FRAME_SCH_VIEWER_MODAL )
SetModal( true );
// Force the frame name used in config. the lib viewer frame has a name
// depending on aFrameType (needed to identify the frame by wxWidgets),
// but only one configuration is preferable.
m_configFrameName = LIB_VIEW_FRAME_NAME;
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( library_browse_xpm ) );
SetIcon( icon );
m_hotkeysDescrList = g_Viewlib_Hokeys_Descr;
m_cmpList = NULL;
m_libList = NULL;
m_listPowerCmpOnly = false;
SetScreen( new SCH_SCREEN( aKiway ) );
GetScreen()->m_Center = true; // Axis origin centered on screen.
LoadSettings( config() );
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
// Initialize grid id to the default value (50 mils):
m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000;
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
// Menu bar is not mandatory: uncomment/comment the next line
// to add/remove the menubar
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateVToolbar();
if( !aLibrary )
{
// Creates the libraries window display
m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST,
wxPoint( 0, 0 ), wxSize(m_libListWidth, -1),
0, NULL, wxLB_HSCROLL );
}
else
{
m_libraryName = aLibrary->GetName();
m_entryName.Clear();
m_unit = 1;
m_convert = 1;
m_libListWidth = 0;
}
// Creates the component window display
m_cmpList = new wxListBox( this, ID_LIBVIEW_CMP_LIST,
wxPoint( 0, 0 ), wxSize(m_cmpListWidth, -1),
0, NULL, wxLB_HSCROLL );
if( m_libList )
ReCreateListLib();
DisplayLibInfos();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO info;
info.InfoToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Manage main toolbal
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) );
// Manage the left window (list of libraries)
if( m_libList )
m_auimgr.AddPane( m_libList, wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) ).
Left().Row( 0 ) );
// Manage the list of components)
m_auimgr.AddPane( m_cmpList,
wxAuiPaneInfo( info ).Name( wxT( "m_cmpList" ) ).
Left().Row( 1 ) );
// Manage the draw panel
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
// Manage the message panel
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
/* Now the minimum windows are fixed, set library list
* and component list of the previous values from last viewlib use
*/
if( m_libList )
{
m_auimgr.GetPane( m_libList ).MinSize( wxSize( 80, -1) );
m_auimgr.GetPane( m_libList ).BestSize( wxSize(m_libListWidth, -1) );
}
m_auimgr.GetPane( m_cmpList ).MinSize( wxSize( 80, -1) );
m_auimgr.GetPane( m_cmpList ).BestSize(wxSize(m_cmpListWidth, -1) );
m_auimgr.Update();
// Now Drawpanel is sized, we can use BestZoom to show the component (if any)
#ifdef USE_WX_GRAPHICS_CONTEXT
GetScreen()->SetZoom( BestZoom() );
#else
Zoom_Automatique( false );
#endif
if( !IsModal() ) // For modal mode, calling ShowModal() will show this frame
{
Raise();
Show( true );
}
}
PCB_EDIT_FRAME::PCB_EDIT_FRAME( wxWindow* parent, const wxString& title,
const wxPoint& pos, const wxSize& size,
long style ) :
PCB_BASE_FRAME( parent, PCB_FRAME_TYPE, title, pos, size,
style, PCB_EDIT_FRAME_NAME )
{
m_FrameName = PCB_EDIT_FRAME_NAME;
m_showBorderAndTitleBlock = true; // true to display sheet references
m_showAxis = false; // true to display X and Y axis
m_showOriginAxis = true;
m_showGridAxis = true;
m_SelTrackWidthBox = NULL;
m_SelViaSizeBox = NULL;
m_SelLayerBox = NULL;
m_show_microwave_tools = false;
m_show_layer_manager_tools = true;
m_HotkeysZoomAndGridList = g_Board_Editor_Hokeys_Descr;
m_hasAutoSave = true;
m_RecordingMacros = -1;
m_microWaveToolBar = NULL;
m_useCmpFileForFpNames = true;
m_footprintLibTable = NULL;
m_globalFootprintTable = NULL;
m_rotationAngle = 900;
#ifdef KICAD_SCRIPTING_WXPYTHON
m_pythonPanel = NULL;
#endif
for ( int i = 0; i < 10; i++ )
m_Macros[i].m_Record.clear();
SetBoard( new BOARD() );
if( GetGalCanvas() )
{
ViewReloadBoard( m_Pcb );
// update the tool manager with the new board and its view.
if( m_toolManager )
m_toolManager->SetEnvironment( m_Pcb, GetGalCanvas()->GetView(),
GetGalCanvas()->GetViewControls(), this );
}
// Create the PCB_LAYER_WIDGET *after* SetBoard():
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
int pointSize = font.GetPointSize();
int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y );
// printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 );
if( screenHeight <= 900 )
pointSize = (pointSize * 8) / 10;
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize );
m_drc = new DRC( this ); // these 2 objects point to each other
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) );
SetIcon( icon );
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
// PCB drawings start in the upper left corner.
GetScreen()->m_Center = false;
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings();
// Be sure options are updated
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum;
m_DisplayModEdge = DisplayOpt.DisplayModEdge;
m_DisplayModText = DisplayOpt.DisplayModText;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
ReCreateMicrowaveVToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// LAYER_WIDGET is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget
lyrs.BestSize( m_Layers->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
if( m_mainToolBar ) // The main horizontal toolbar
{
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
}
if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...)
{
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
}
if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools)
m_auimgr.AddPane( m_microWaveToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ).Right().Layer( 1 ).Position(1).Hide() );
if( m_drawToolBar ) // The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) );
// Add the layer manager ( most right side of pcbframe )
m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) );
if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew)
{
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) );
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
}
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( GetGalCanvas() )
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
#ifdef KICAD_SCRIPTING_WXPYTHON
// Add the scripting panel
EDA_PANEINFO pythonAuiInfo;
pythonAuiInfo.ScriptingToolbarPane();
pythonAuiInfo.Caption( wxT( "Python Scripting" ) );
pythonAuiInfo.MinSize( wxSize( 200, 100 ) );
pythonAuiInfo.BestSize( wxSize( GetClientSize().x/2, 200 ) );
pythonAuiInfo.Hide();
m_pythonPanel = CreatePythonShellWindow( this );
m_auimgr.AddPane( m_pythonPanel,
pythonAuiInfo.Name( wxT( "PythonPanel" ) ).Bottom().Layer(9) );
m_pythonPanelHidden = true;
#endif
ReFillLayerWidget(); // this is near end because contents establish size
m_Layers->ReFillRender(); // Update colors in Render after the config is read
syncLayerWidgetLayer();
m_auimgr.Update();
if( m_globalFootprintTable == NULL )
{
try
{
m_globalFootprintTable = new FP_LIB_TABLE();
if( !FP_LIB_TABLE::LoadGlobalTable( *m_globalFootprintTable ) )
{
DisplayInfoMessage( this, wxT( "You have run Pcbnew for the first time using the "
"new footprint library table method for finding "
"footprints. Pcbnew has either copied the default "
"table or created an empty table in your home "
"folder. You must first configure the library "
"table to include all footprint libraries not "
"included with KiCad. See the \"Footprint Library "
"Table\" section of the CvPcb documentation for "
"more information." ) );
}
}
catch( IO_ERROR ioe )
{
wxString msg;
msg.Printf( _( "An error occurred attempting to load the global footprint library "
"table:\n\n%s" ), GetChars( ioe.errorText ) );
DisplayError( this, msg );
}
}
setupTools();
}
PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB, wxT( "Pcbnew" ), wxDefaultPosition,
wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PCB_EDIT_FRAME_NAME )
{
m_FrameName = PCB_EDIT_FRAME_NAME;
m_showBorderAndTitleBlock = true; // true to display sheet references
m_showAxis = false; // true to display X and Y axis
m_showOriginAxis = true;
m_showGridAxis = true;
m_SelTrackWidthBox = NULL;
m_SelViaSizeBox = NULL;
m_SelLayerBox = NULL;
m_show_microwave_tools = false;
m_show_layer_manager_tools = true;
m_HotkeysZoomAndGridList = g_Board_Editor_Hokeys_Descr;
m_hasAutoSave = true;
m_RecordingMacros = -1;
m_microWaveToolBar = NULL;
m_useCmpFileForFpNames = true;
#if defined(KICAD_SCRIPTING_WXPYTHON)
m_pythonPanel = NULL;
m_pythonPanelShow = false;
#endif
m_rotationAngle = 900;
for ( int i = 0; i < 10; i++ )
m_Macros[i].m_Record.clear();
// Create GAL canvas
SetGalCanvas( new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize,
PCB_DRAW_PANEL_GAL::GAL_TYPE_CAIRO ) );
SetBoard( new BOARD() );
// Create the PCB_LAYER_WIDGET *after* SetBoard():
wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT );
int pointSize = font.GetPointSize();
int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y );
// printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 );
if( screenHeight <= 900 )
pointSize = (pointSize * 8) / 10;
m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize );
m_drc = new DRC( this ); // these 2 objects point to each other
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) );
SetIcon( icon );
SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) );
// PCB drawings start in the upper left corner.
GetScreen()->m_Center = false;
// LoadSettings() *after* creating m_LayersManager, because LoadSettings()
// initialize parameters in m_LayersManager
LoadSettings( config() );
// Be sure options are updated
m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill;
m_DisplayPadFill = DisplayOpt.DisplayPadFill;
m_DisplayViaFill = DisplayOpt.DisplayViaFill;
m_DisplayPadNum = DisplayOpt.DisplayPadNum;
m_DisplayModEdge = DisplayOpt.DisplayModEdge;
m_DisplayModText = DisplayOpt.DisplayModText;
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER );
GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId );
if( m_canvas )
m_canvas->SetEnableBlockCommands( true );
ReCreateMenuBar();
ReCreateHToolbar();
ReCreateAuxiliaryToolbar();
ReCreateVToolbar();
ReCreateOptToolbar();
ReCreateMicrowaveVToolbar();
m_auimgr.SetManagedWindow( this );
EDA_PANEINFO horiz;
horiz.HorizontalToolbarPane();
EDA_PANEINFO vert;
vert.VerticalToolbarPane();
EDA_PANEINFO mesg;
mesg.MessageToolbarPane();
// Create a wxAuiPaneInfo for the Layers Manager, not derived from the template.
// LAYER_WIDGET is floatable, but initially docked at far right
EDA_PANEINFO lyrs;
lyrs.LayersToolbarPane();
lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget
lyrs.BestSize( m_Layers->GetBestSize() );
lyrs.Caption( _( "Visibles" ) );
lyrs.TopDockable( false ).BottomDockable( false );
if( m_mainToolBar ) // The main horizontal toolbar
{
m_auimgr.AddPane( m_mainToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) );
}
if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...)
{
m_auimgr.AddPane( m_auxiliaryToolBar,
wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) );
}
if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools)
m_auimgr.AddPane( m_microWaveToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ).
Right().Layer( 1 ).Position(1).Hide() );
if( m_drawToolBar ) // The main right vertical toolbar
m_auimgr.AddPane( m_drawToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) );
// Add the layer manager ( most right side of pcbframe )
m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) );
if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew)
{
m_auimgr.AddPane( m_optionsToolBar,
wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) );
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
}
if( m_canvas )
m_auimgr.AddPane( m_canvas,
wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() );
if( GetGalCanvas() )
m_auimgr.AddPane( (wxWindow*) GetGalCanvas(),
wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() );
if( m_messagePanel )
m_auimgr.AddPane( m_messagePanel,
wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) );
ReFillLayerWidget(); // this is near end because contents establish size
m_Layers->ReFillRender(); // Update colors in Render after the config is read
syncLayerWidgetLayer();
m_auimgr.Update();
setupTools();
Zoom_Automatique( true );
}