FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString, wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() ) { m_showBorderAndTitleBlock = false; // true to show the frame references m_showAxis = true; // true to show X and Y axis on screen m_showGridAxis = true; // show the grid origin axis m_hotkeysDescrList = g_Module_Editor_Hokeys_Descr; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) ); SetIcon( icon ); // Show a title (frame title + footprint name): updateTitle(); // Create GAL canvas PCB_BASE_FRAME* parentFrame = static_cast<PCB_BASE_FRAME*>( Kiway().Player( FRAME_PCB, true ) ); PCB_DRAW_PANEL_GAL* drawPanel = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize, parentFrame->GetGalCanvas()->GetBackend() ); SetGalCanvas( drawPanel ); SetBoard( new BOARD() ); // In modedit, the default net clearance is not known. // (it depends on the actual board) // So we do not show the default clearance, by setting it to 0 // The footprint or pad specific clearance will be shown GetBoard()->GetDesignSettings().GetDefault()->SetClearance(0); // restore the last footprint from the project, if any restoreLastFootprint(); // Ensure all layers and items are visible: // In footprint editor, some layers have no meaning or // cannot be used, but we show all of them, at least to be able // to edit a bad layer GetBoard()->SetVisibleAlls(); wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), font.GetPointSize(), true ); LoadSettings( config() ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax ); GetScreen()->SetCurItem( NULL ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); // In modedit, set the default paper size to A4: // this should be OK for all footprint to plot/print SetPageSettings( PAGE_INFO( PAGE_INFO::A4 ) ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg_pane; mesg_pane.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 2 ) ); // Layers manager is visible m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( true ); // The left vertical toolbar (fast acces to display options) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); // Create the manager and dispatcher & route draw panel events to the dispatcher setupTools(); UseGalCanvas( parentFrame->IsGalCanvasActive() ); if( m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).IsShown() ) { m_Layers->ReFill(); m_Layers->ReFillRender(); GetScreen()->m_Active_Layer = F_SilkS; m_Layers->SelectLayer( F_SilkS ); m_Layers->OnLayerSelected(); } m_auimgr.Update(); Raise(); // On some window managers, this is needed Show( true ); Zoom_Automatique( false ); }
PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB, wxT( "Pcbnew" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PCB_EDIT_FRAME_NAME ) { m_showBorderAndTitleBlock = true; // true to display sheet references m_showAxis = false; // true to display X and Y axis m_showOriginAxis = true; m_showGridAxis = true; m_SelTrackWidthBox = NULL; m_SelViaSizeBox = NULL; m_SelLayerBox = NULL; m_show_microwave_tools = false; m_show_layer_manager_tools = true; m_hotkeysDescrList = g_Board_Editor_Hokeys_Descr; m_hasAutoSave = true; m_microWaveToolBar = NULL; m_rotationAngle = 900; // Create GAL canvas EDA_DRAW_PANEL_GAL* galCanvas = new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize, GetGalDisplayOptions(), EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE ); SetGalCanvas( galCanvas ); SetBoard( new BOARD() ); // Create the PCB_LAYER_WIDGET *after* SetBoard(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); // printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize ); m_drc = new DRC( this ); // these 2 objects point to each other wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) ); SetIcon( icon ); // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings( config() ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax ); // PCB drawings start in the upper left corner. GetScreen()->m_Center = false; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); ReCreateMicrowaveVToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); lyrs.TopDockable( false ).BottomDockable( false ); if( m_mainToolBar ) // The main horizontal toolbar { m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); } if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...) { m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); } if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools) m_auimgr.AddPane( m_microWaveToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ). Right().Layer( 1 ).Position(1).Hide() ); if( m_drawToolBar ) // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) ); if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew) { m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) ); m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools ); m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools ); } if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( GetGalCanvas() ) m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); ReFillLayerWidget(); // this is near end because contents establish size m_Layers->ReFillRender(); // Update colors in Render after the config is read syncLayerWidgetLayer(); m_auimgr.Update(); setupTools(); Zoom_Automatique( false ); EDA_DRAW_PANEL_GAL::GAL_TYPE canvasType = LoadCanvasTypeSetting(); if( canvasType != EDA_DRAW_PANEL_GAL::GAL_TYPE_NONE ) { if( GetGalCanvas()->SwitchBackend( canvasType ) ) UseGalCanvas( true ); } enableGALSpecificMenus(); // disable Export STEP item if kicad2step does not exist wxString strK2S = Pgm().GetExecutablePath(); #ifdef __WXMAC__ strK2S += "Contents/MacOS/"; #endif wxFileName appK2S( strK2S, "kicad2step" ); #ifdef _WIN32 appK2S.SetExt( "exe" ); #endif if( !appK2S.FileExists() ) GetMenuBar()->FindItem( ID_GEN_EXPORT_FILE_STEP )->Enable( false ); }
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_FRAME( aKiway, aParent, FRAME_PCB_MODULE_EDITOR, wxEmptyString, wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetFootprintEditorFrameName() ) { m_FrameName = GetFootprintEditorFrameName(); m_showBorderAndTitleBlock = false; // true to show the frame references m_showAxis = true; // true to show X and Y axis on screen m_showGridAxis = true; // show the grid origin axis m_HotkeysZoomAndGridList = g_Module_Editor_Hokeys_Descr; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) ); SetIcon( icon ); // Show a title (frame title + footprint name): updateTitle(); if( !s_Pcb ) { s_Pcb = new BOARD(); // Ensure all layers and items are visible: s_Pcb->SetVisibleAlls(); } SetBoard( s_Pcb ); if( !s_screenModule ) s_screenModule = new PCB_SCREEN( GetPageSettings().GetSizeIU() ); SetScreen( s_screenModule ); GetScreen()->SetCurItem( NULL ); LoadSettings( config() ); GetBoard()->SetVisibleAlls(); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); // In modedit, set the default paper size to A4: // this should be OK for all footprint to plot/print SetPageSettings( PAGE_INFO::A4 ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg_pane; mesg_pane.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer(1) ); // The left vertical toolbar (fast acces to display options) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left().Layer(1) ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.Update(); }
GERBVIEW_FRAME::GERBVIEW_FRAME( KIWAY* aKiway, wxWindow* aParent ): EDA_DRAW_FRAME( aKiway, aParent, FRAME_GERBER, wxT( "GerbView" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GERBVIEW_FRAME_NAME ) { m_colorsSettings = &g_ColorsSettings; m_gerberLayout = NULL; m_zoomLevelCoeff = ZOOM_FACTOR( 110 ); // Adjusted to roughly displays zoom level = 1 // when the screen shows a 1:1 image // obviously depends on the monitor, // but this is an acceptable value PAGE_INFO pageInfo( wxT( "GERBER" ) ); SetPageSettings( pageInfo ); m_show_layer_manager_tools = true; m_showAxis = true; // true to show X and Y axis on screen m_showBorderAndTitleBlock = false; // true for reference drawings. m_HotkeysZoomAndGridList = GerbviewHokeysDescr; m_SelLayerBox = NULL; m_DCodeSelector = NULL; m_displayMode = 0; m_drillFileHistory.SetBaseId( ID_GERBVIEW_DRILL_FILE1 ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_gerbview_xpm ) ); SetIcon( icon ); SetLayout( new GBR_LAYOUT() ); SetVisibleLayers( -1 ); // All draw layers visible. SetScreen( new GBR_SCREEN( GetPageSettings().GetSizeIU() ) ); // Create the PCB_LAYER_WIDGET *after* SetLayout(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_LayersManager = new GERBER_LAYER_WIDGET( this, m_canvas, pointSize ); // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings( config() ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); if( m_LastGridSizeId < 0 ) m_LastGridSizeId = 0; if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateOptToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // the Layers Manager is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_LayersManager->GetBestSize() ); lyrs.BestSize( m_LayersManager->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); lyrs.TopDockable( false ).BottomDockable( false ); if( m_mainToolBar ) m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); if( m_drawToolBar ) m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) ); m_auimgr.AddPane( m_LayersManager, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 0 ) ); if( m_optionsToolBar ) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) ); ReFillLayerWidget(); // this is near end because contents establish size m_LayersManager->ReFillRender(); // Update colors in Render after the config is read m_auimgr.Update(); setActiveLayer( 0, true ); Zoom_Automatique( false ); // Gives a default zoom value }
LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_LIB_EDITOR, _( "Library Editor" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, LIB_EDIT_FRAME_NAME ) { m_showAxis = true; // true to draw axis SetShowDeMorgan( false ); m_drawSpecificConvert = true; m_drawSpecificUnit = false; m_hotkeysDescrList = g_Libedit_Hokeys_Descr; m_editPinsPerPartOrConvert = false; m_repeatPinStep = DEFAULT_REPEAT_OFFSET_PIN; m_my_part = NULL; m_tempCopyComponent = NULL; // Delayed initialization if( m_textSize == -1 ) m_textSize = GetDefaultTextSize(); // Initialize grid id to the default value 50 mils: m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; wxIcon icon; icon.CopyFromBitmap( KiBitmap( libedit_icon_xpm ) ); SetIcon( icon ); LoadSettings( config() ); SetScreen( new SCH_SCREEN( aKiway ) ); GetScreen()->m_Center = true; GetScreen()->SetMaxUndoItems( m_UndoRedoCountMax ); SetCrossHairPosition( wxPoint( 0, 0 ) ); // Ensure m_LastGridSizeId is an offset inside the allowed schematic range if( m_LastGridSizeId < ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateVToolbar(); // Ensure the current alias name is valid if a part is loaded // Sometimes it is not valid. This is the case // when a part value (the part lib name), or the alias list was modified // during a previous session and the modifications not saved in lib. // Reopen libedit in a new session gives a non valid m_aliasName // because the curr part is reloaded from the library (and this is the unmodified part) // and the old alias name (from the previous edition) can be invalid LIB_PART* part = GetCurPart(); if( part == NULL ) m_aliasName.Empty(); else if( m_aliasName != part->GetName() ) { LIB_ALIAS* alias = part->GetAlias( m_aliasName ); if( !alias ) m_aliasName = part->GetName(); } CreateOptionToolbar(); DisplayLibInfos(); DisplayCmpDoc(); UpdateAliasSelectList(); UpdatePartSelectList(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() ); m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.Update(); Raise(); Show( true ); wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED, ID_ZOOM_PAGE ); wxPostEvent( this, evt ); }
LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType, CMP_LIBRARY* aLibrary ) : SCH_BASE_FRAME( aKiway, aParent, aFrameType, _( "Library Browser" ), wxDefaultPosition, wxDefaultSize, aFrameType==FRAME_SCH_VIEWER ? KICAD_DEFAULT_DRAWFRAME_STYLE : KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT, GetLibViewerFrameName() ) { wxASSERT( aFrameType==FRAME_SCH_VIEWER || aFrameType==FRAME_SCH_VIEWER_MODAL ); if( aFrameType == FRAME_SCH_VIEWER_MODAL ) SetModal( true ); wxAcceleratorTable table( ACCEL_TABLE_CNT, accels ); m_FrameName = GetLibViewerFrameName(); m_configPath = wxT( "LibraryViewer" ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( library_browse_xpm ) ); SetIcon( icon ); m_HotkeysZoomAndGridList = s_Viewlib_Hokeys_Descr; m_cmpList = NULL; m_libList = NULL; SetScreen( new SCH_SCREEN() ); GetScreen()->m_Center = true; // Axis origin centered on screen. LoadSettings( config() ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); // Initialize grid id to the default value (50 mils): m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); ReCreateHToolbar(); ReCreateVToolbar(); wxSize size = GetClientSize(); size.y -= m_MsgFrameHeight + 2; wxPoint win_pos( 0, 0 ); if( !aLibrary ) { // Creates the libraries window display m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST, wxPoint( 0, 0 ), wxSize(m_libListWidth, -1), 0, NULL, wxLB_HSCROLL ); } else { m_libraryName = aLibrary->GetName(); m_entryName.Clear(); m_unit = 1; m_convert = 1; m_libListWidth = 0; } // Creates the component window display win_pos.x = m_libListWidth; m_cmpList = new wxListBox( this, ID_LIBVIEW_CMP_LIST, wxPoint( 0, 0 ), wxSize(m_cmpListWidth, -1), 0, NULL, wxLB_HSCROLL ); if( m_libList ) ReCreateListLib(); DisplayLibInfos(); if( m_canvas ) m_canvas->SetAcceleratorTable( table ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO info; info.InfoToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Manage main toolbal m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) ); // Manage the left window (list of libraries) if( m_libList ) m_auimgr.AddPane( m_libList, wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) ). Left().Row( 0 ) ); // Manage the list of components) m_auimgr.AddPane( m_cmpList, wxAuiPaneInfo( info ).Name( wxT( "m_cmpList" ) ). Left().Row( 1 ) ); // Manage the draw panel m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); // Manage the message panel m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); /* Now the minimum windows are fixed, set library list * and component list of the previous values from last viewlib use */ if( m_libList ) { m_auimgr.GetPane( m_libList ).MinSize( wxSize( 80, -1) ); m_auimgr.GetPane( m_libList ).BestSize( wxSize(m_libListWidth, -1) ); } m_auimgr.GetPane( m_cmpList ).MinSize( wxSize( 80, -1) ); m_auimgr.GetPane( m_cmpList ).BestSize(wxSize(m_cmpListWidth, -1) ); m_auimgr.Update(); // Now Drawpanel is sized, we can use BestZoom to show the component (if any) #ifdef USE_WX_GRAPHICS_CONTEXT GetScreen()->SetZoom( BestZoom() ); #else Zoom_Automatique( false ); #endif Show( true ); }
FOOTPRINT_EDIT_FRAME::FOOTPRINT_EDIT_FRAME( PCB_EDIT_FRAME* aParent, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : PCB_BASE_FRAME( aParent, MODULE_EDITOR_FRAME, wxEmptyString, pos, size, style ) { m_FrameName = wxT( "ModEditFrame" ); m_showBorderAndTitleBlock = false; // true to show the frame references m_showAxis = true; // true to show X and Y axis on screen m_showGridAxis = true; // show the grid origin axis m_HotkeysZoomAndGridList = g_Module_Editor_Hokeys_Descr; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_modedit_xpm ) ); SetIcon( icon ); UpdateTitle(); if( !s_Pcb ) { s_Pcb = new BOARD(); // Ensure all layers and items are visible: s_Pcb->SetVisibleAlls(); } SetBoard( s_Pcb ); if( !s_screenModule ) s_screenModule = new PCB_SCREEN( GetPageSettings().GetSizeIU() ); SetScreen( s_screenModule ); GetScreen()->SetCurItem( NULL ); LoadSettings(); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg_pane; mesg_pane.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() ); m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ). Left() ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg_pane ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.Update(); }
DISPLAY_FOOTPRINTS_FRAME::DISPLAY_FOOTPRINTS_FRAME( KIWAY* aKiway, CVPCB_MAINFRAME* aParent ) : PCB_BASE_FRAME( aKiway, aParent, FRAME_CVPCB_DISPLAY, _( "Footprint Viewer" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, FOOTPRINTVIEWER_FRAME_NAME ) { m_showAxis = true; // true to draw axis. // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_cvpcb_xpm ) ); SetIcon( icon ); SetBoard( new BOARD() ); SetScreen( new PCB_SCREEN( GetPageSizeIU() ) ); LoadSettings( config() ); // Initialize grid id to a default value if not found in config or incorrect: if( !( GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) ) ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_500 - ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ); // Initialize some display options DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions(); displ_opts->m_DisplayPadIsol = false; // Pad clearance has no meaning here // Track and via clearance has no meaning here. displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); ReCreateHToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top(). Row( 0 ) ); if( m_drawToolBar ) // Currently, no vertical right toolbar. m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right() ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DisplayFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); m_auimgr.Update(); Show( true ); }
GERBVIEW_FRAME::GERBVIEW_FRAME( wxWindow* aParent, const wxString& aTitle, const wxPoint& aPosition, const wxSize& aSize, long aStyle ) : EDA_DRAW_FRAME( aParent, GERBER_FRAME_TYPE, aTitle, aPosition, aSize, aStyle, GERBVIEW_FRAME_NAME ) { m_colorsSettings = &g_ColorsSettings; m_gerberLayout = NULL; m_FrameName = GERBVIEW_FRAME_NAME; m_show_layer_manager_tools = true; m_showAxis = true; // true to show X and Y axis on screen m_showBorderAndTitleBlock = false; // true for reference drawings. m_HotkeysZoomAndGridList = s_Gerbview_Hokeys_Descr; m_SelLayerBox = NULL; m_DCodeSelector = NULL; m_displayMode = 0; m_drillFileHistory.SetBaseId( ID_GERBVIEW_DRILL_FILE1 ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_gerbview_xpm ) ); SetIcon( icon ); SetLayout( new GBR_LAYOUT() ); SetVisibleLayers( FULL_LAYERS ); // All 32 layers visible. SetScreen( new GBR_SCREEN( GetGerberLayout()->GetPageSettings().GetSizeIU() ) ); // Create the PCB_LAYER_WIDGET *after* SetLayout(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_LayersManager = new GERBER_LAYER_WIDGET( this, m_canvas, pointSize ); // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings(); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); if( m_LastGridSizeId < 0 ) m_LastGridSizeId = 0; if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_0_0_1MM-ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateOptToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_LayersManager->GetBestSize() ); lyrs.BestSize( m_LayersManager->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); if( m_mainToolBar ) m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); if( m_drawToolBar ) m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) ); m_auimgr.AddPane( m_LayersManager, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 0 ) ); if( m_optionsToolBar ) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) ); ReFillLayerWidget(); // this is near end because contents establish size m_LayersManager->ReFillRender(); // Update colors in Render after the config is read m_auimgr.Update(); }
PL_EDITOR_FRAME::PL_EDITOR_FRAME( KIWAY* aKiway, wxWindow* aParent ) : EDA_DRAW_FRAME( aKiway, aParent, FRAME_PL_EDITOR, wxT( "PlEditorFrame" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PL_EDITOR_FRAME_NAME ) { m_zoomLevelCoeff = 290.0; // Adjusted to roughly displays zoom level = 1 // when the screen shows a 1:1 image // obviously depends on the monitor, // but this is an acceptable value m_showAxis = false; // true to show X and Y axis on screen m_showGridAxis = true; m_showBorderAndTitleBlock = true; // true for reference drawings. m_hotkeysDescrList = PlEditorHokeysDescr; m_originSelectChoice = 0; SetDrawBgColor( WHITE ); // default value, user option (WHITE/BLACK) SetShowPageLimits( true ); m_designTreeWidth = 150; m_propertiesFrameWidth = 200; if( m_canvas ) m_canvas->SetEnableBlockCommands( false ); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_pagelayout_editor_xpm ) ); SetIcon( icon ); wxSize pageSizeIU = GetPageLayout().GetPageSettings().GetSizeIU(); SetScreen( new PL_EDITOR_SCREEN( pageSizeIU ) ); LoadSettings( config() ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); if( ! GetScreen()->GridExists( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ) ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1MM - ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( m_LastGridSizeId + ID_POPUP_GRID_LEVEL_1000 ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateOptToolbar(); wxWindow* stsbar = GetStatusBar(); int dims[] = { // balance of status bar on far left is set to a default or whatever is left over. -1, // When using GetTextSize() remember the width of '1' is not the same // as the width of '0' unless the font is fixed width, and it usually won't be. // zoom: GetTextSize( wxT( "Z 762000" ), stsbar ).x + 10, // cursor coords GetTextSize( wxT( "X 0234.567 Y 0234.567" ), stsbar ).x + 10, // delta distances GetTextSize( wxT( "dx 0234.567 dx 0234.567" ), stsbar ).x + 10, // Coord origin (use the bigger message) GetTextSize( _( "coord origin: Right Bottom page corner" ), stsbar ).x + 10, // units display, Inches is bigger than mm GetTextSize( _( "Inches" ), stsbar ).x + 10 }; SetStatusWidths( DIM( dims ), dims ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); m_propertiesPagelayout = new PROPERTIES_FRAME( this ); EDA_PANEINFO props; props.LayersToolbarPane(); props.MinSize( m_propertiesPagelayout->GetMinSize() ); props.BestSize( m_propertiesFrameWidth, -1 ); props.Caption( _( "Properties" ) ); m_treePagelayout = new DESIGN_TREE_FRAME( this ); EDA_PANEINFO tree; tree.LayersToolbarPane(); tree.MinSize( m_treePagelayout->GetMinSize() ); tree.BestSize( m_designTreeWidth, -1 ); tree.Caption( _( "Design" ) ); if( m_mainToolBar ) m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); if( m_drawToolBar ) m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right().Row( 1 ) ); m_auimgr.AddPane( m_propertiesPagelayout, props.Name( wxT( "m_propertiesPagelayout" ) ).Right().Layer( 1 ) ); m_auimgr.AddPane( m_treePagelayout, tree.Name( wxT( "m_treePagelayout" ) ).Left().Layer( 0 ) ); if( m_optionsToolBar ) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane().Layer( 5 ) ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer( 10 ) ); m_auimgr.Update(); // Initialize the current page layout WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance(); #if 0 //start with empty layout pglayout.AllowVoidList( true ); pglayout.ClearList(); #else // start with the default Kicad layout pglayout.SetPageLayout(); #endif OnNewPageLayout(); }
SCH_EDIT_FRAME::SCH_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ): SCH_BASE_FRAME( aKiway, aParent, SCHEMATIC_FRAME_TYPE, wxT( "Eeschema" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, SCH_EDIT_FRAME_NAME ), m_item_to_repeat( 0 ) { m_FrameName = SCH_EDIT_FRAME_NAME; m_showAxis = false; // true to show axis m_showBorderAndTitleBlock = true; // true to show sheet references m_CurrentSheet = new SCH_SHEET_PATH(); m_TextFieldSize = DEFAULT_SIZE_TEXT; m_DefaultSchematicFileName = NAMELESS_PROJECT; m_DefaultSchematicFileName += wxT( ".sch" ); m_showAllPins = false; m_previewPosition = wxDefaultPosition; m_previewSize = wxDefaultSize; m_printMonochrome = true; m_printSheetReference = true; m_HotkeysZoomAndGridList = s_Schematic_Hokeys_Descr; m_dlgFindReplace = NULL; m_findReplaceData = new wxFindReplaceData( wxFR_DOWN ); m_undoItem = NULL; m_hasAutoSave = true; SetForceHVLines( true ); SetDefaultLabelSize( DEFAULT_SIZE_TEXT ); CreateScreens(); // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_eeschema_xpm ) ); SetIcon( icon ); // Initialize grid id to the default value (50 mils): m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; LoadSettings( config() ); // Ensure m_LastGridSizeId is an offset inside the allowed schematic range if( m_LastGridSizeId < ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); // Initialize common print setup dialog settings. m_pageSetupData.GetPrintData().SetPrintMode( wxPRINT_MODE_PRINTER ); m_pageSetupData.GetPrintData().SetQuality( wxPRINT_QUALITY_MEDIUM ); m_pageSetupData.GetPrintData().SetBin( wxPRINTBIN_AUTO ); m_pageSetupData.GetPrintData().SetNoCopies( 1 ); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); if( m_mainToolBar ) m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); if( m_drawToolBar ) m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_drawToolBar" ) ).Right() ); if( m_optionsToolBar ) m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom(). Layer(10) ); m_auimgr.Update(); // Now Drawpanel is sized, we can use BestZoom to show the component (if any) GetScreen()->SetZoom( BestZoom() ); }
LIB_EDIT_FRAME::LIB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : SCH_BASE_FRAME( aKiway, aParent, FRAME_SCH_LIB_EDITOR, _( "Library Editor" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, GetLibEditFrameName() ) { wxASSERT( aParent ); m_FrameName = GetLibEditFrameName(); m_showAxis = true; // true to draw axis m_configPath = wxT( "LibraryEditor" ); SetShowDeMorgan( false ); m_drawSpecificConvert = true; m_drawSpecificUnit = false; m_tempCopyComponent = NULL; m_HotkeysZoomAndGridList = s_Libedit_Hokeys_Descr; m_editPinsPerPartOrConvert = false; // Delayed initialization if( m_textSize == -1 ) m_textSize = GetDefaultTextSize(); // Initialize grid id to the default value 50 mils: m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; wxIcon icon; icon.CopyFromBitmap( KiBitmap( libedit_icon_xpm ) ); SetIcon( icon ); SetScreen( new SCH_SCREEN() ); GetScreen()->m_Center = true; SetCrossHairPosition( wxPoint( 0, 0 ) ); LoadSettings( config() ); // Ensure m_LastGridSizeId is an offset inside the allowed schematic range if( m_LastGridSizeId < ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; if( m_LastGridSizeId > ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000 ) m_LastGridSizeId = ID_POPUP_GRID_LEVEL_1 - ID_POPUP_GRID_LEVEL_1000; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); EnsureActiveLibExists(); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateVToolbar(); CreateOptionToolbar(); DisplayLibInfos(); DisplayCmpDoc(); UpdateAliasSelectList(); UpdatePartSelectList(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right() ); m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left() ); m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); m_auimgr.Update(); Show( true ); wxCommandEvent evt( wxEVT_COMMAND_MENU_SELECTED, ID_ZOOM_PAGE ); wxPostEvent( this, evt ); }
LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType, PART_LIB* aLibrary ) : SCH_BASE_FRAME( aKiway, aParent, aFrameType, _( "Library Browser" ), wxDefaultPosition, wxDefaultSize, aFrameType==FRAME_SCH_VIEWER_MODAL ? #ifdef __WINDOWS__ KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP #else aParent ? KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT : KICAD_DEFAULT_DRAWFRAME_STYLE | wxSTAY_ON_TOP #endif : KICAD_DEFAULT_DRAWFRAME_STYLE, aFrameType == FRAME_SCH_VIEWER_MODAL ? LIB_VIEW_FRAME_NAME_MODAL : LIB_VIEW_FRAME_NAME ) { wxASSERT( aFrameType == FRAME_SCH_VIEWER || aFrameType == FRAME_SCH_VIEWER_MODAL ); if( aFrameType == FRAME_SCH_VIEWER_MODAL ) SetModal( true ); // Force the frame name used in config. the lib viewer frame has a name // depending on aFrameType (needed to identify the frame by wxWidgets), // but only one configuration is preferable. m_configFrameName = LIB_VIEW_FRAME_NAME; // Give an icon wxIcon icon; icon.CopyFromBitmap( KiBitmap( library_browse_xpm ) ); SetIcon( icon ); m_hotkeysDescrList = g_Viewlib_Hokeys_Descr; m_cmpList = NULL; m_libList = NULL; m_listPowerCmpOnly = false; SetScreen( new SCH_SCREEN( aKiway ) ); GetScreen()->m_Center = true; // Axis origin centered on screen. LoadSettings( config() ); SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); // Initialize grid id to the default value (50 mils): m_LastGridSizeId = ID_POPUP_GRID_LEVEL_50 - ID_POPUP_GRID_LEVEL_1000; GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); // Menu bar is not mandatory: uncomment/comment the next line // to add/remove the menubar ReCreateMenuBar(); ReCreateHToolbar(); ReCreateVToolbar(); if( !aLibrary ) { // Creates the libraries window display m_libList = new wxListBox( this, ID_LIBVIEW_LIB_LIST, wxPoint( 0, 0 ), wxSize(m_libListWidth, -1), 0, NULL, wxLB_HSCROLL ); } else { m_libraryName = aLibrary->GetName(); m_entryName.Clear(); m_unit = 1; m_convert = 1; m_libListWidth = 0; } // Creates the component window display m_cmpList = new wxListBox( this, ID_LIBVIEW_CMP_LIST, wxPoint( 0, 0 ), wxSize(m_cmpListWidth, -1), 0, NULL, wxLB_HSCROLL ); if( m_libList ) ReCreateListLib(); DisplayLibInfos(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO info; info.InfoToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Manage main toolbal m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT ("m_mainToolBar" ) ).Top().Row( 0 ) ); // Manage the left window (list of libraries) if( m_libList ) m_auimgr.AddPane( m_libList, wxAuiPaneInfo( info ).Name( wxT( "m_libList" ) ). Left().Row( 0 ) ); // Manage the list of components) m_auimgr.AddPane( m_cmpList, wxAuiPaneInfo( info ).Name( wxT( "m_cmpList" ) ). Left().Row( 1 ) ); // Manage the draw panel m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); // Manage the message panel m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); /* Now the minimum windows are fixed, set library list * and component list of the previous values from last viewlib use */ if( m_libList ) { m_auimgr.GetPane( m_libList ).MinSize( wxSize( 80, -1) ); m_auimgr.GetPane( m_libList ).BestSize( wxSize(m_libListWidth, -1) ); } m_auimgr.GetPane( m_cmpList ).MinSize( wxSize( 80, -1) ); m_auimgr.GetPane( m_cmpList ).BestSize(wxSize(m_cmpListWidth, -1) ); m_auimgr.Update(); // Now Drawpanel is sized, we can use BestZoom to show the component (if any) #ifdef USE_WX_GRAPHICS_CONTEXT GetScreen()->SetZoom( BestZoom() ); #else Zoom_Automatique( false ); #endif if( !IsModal() ) // For modal mode, calling ShowModal() will show this frame { Raise(); Show( true ); } }
PCB_EDIT_FRAME::PCB_EDIT_FRAME( wxWindow* parent, const wxString& title, const wxPoint& pos, const wxSize& size, long style ) : PCB_BASE_FRAME( parent, PCB_FRAME_TYPE, title, pos, size, style, PCB_EDIT_FRAME_NAME ) { m_FrameName = PCB_EDIT_FRAME_NAME; m_showBorderAndTitleBlock = true; // true to display sheet references m_showAxis = false; // true to display X and Y axis m_showOriginAxis = true; m_showGridAxis = true; m_SelTrackWidthBox = NULL; m_SelViaSizeBox = NULL; m_SelLayerBox = NULL; m_show_microwave_tools = false; m_show_layer_manager_tools = true; m_HotkeysZoomAndGridList = g_Board_Editor_Hokeys_Descr; m_hasAutoSave = true; m_RecordingMacros = -1; m_microWaveToolBar = NULL; m_useCmpFileForFpNames = true; m_footprintLibTable = NULL; m_globalFootprintTable = NULL; m_rotationAngle = 900; #ifdef KICAD_SCRIPTING_WXPYTHON m_pythonPanel = NULL; #endif for ( int i = 0; i < 10; i++ ) m_Macros[i].m_Record.clear(); SetBoard( new BOARD() ); if( GetGalCanvas() ) { ViewReloadBoard( m_Pcb ); // update the tool manager with the new board and its view. if( m_toolManager ) m_toolManager->SetEnvironment( m_Pcb, GetGalCanvas()->GetView(), GetGalCanvas()->GetViewControls(), this ); } // Create the PCB_LAYER_WIDGET *after* SetBoard(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); // printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize ); m_drc = new DRC( this ); // these 2 objects point to each other wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) ); SetIcon( icon ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); // PCB drawings start in the upper left corner. GetScreen()->m_Center = false; // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings(); // Be sure options are updated m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill; m_DisplayPadFill = DisplayOpt.DisplayPadFill; m_DisplayViaFill = DisplayOpt.DisplayViaFill; m_DisplayPadNum = DisplayOpt.DisplayPadNum; m_DisplayModEdge = DisplayOpt.DisplayModEdge; m_DisplayModText = DisplayOpt.DisplayModText; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); ReCreateMicrowaveVToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); if( m_mainToolBar ) // The main horizontal toolbar { m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); } if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...) { m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); } if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools) m_auimgr.AddPane( m_microWaveToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ).Right().Layer( 1 ).Position(1).Hide() ); if( m_drawToolBar ) // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) ); if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew) { m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) ); m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools ); m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools ); } if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( GetGalCanvas() ) m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); #ifdef KICAD_SCRIPTING_WXPYTHON // Add the scripting panel EDA_PANEINFO pythonAuiInfo; pythonAuiInfo.ScriptingToolbarPane(); pythonAuiInfo.Caption( wxT( "Python Scripting" ) ); pythonAuiInfo.MinSize( wxSize( 200, 100 ) ); pythonAuiInfo.BestSize( wxSize( GetClientSize().x/2, 200 ) ); pythonAuiInfo.Hide(); m_pythonPanel = CreatePythonShellWindow( this ); m_auimgr.AddPane( m_pythonPanel, pythonAuiInfo.Name( wxT( "PythonPanel" ) ).Bottom().Layer(9) ); m_pythonPanelHidden = true; #endif ReFillLayerWidget(); // this is near end because contents establish size m_Layers->ReFillRender(); // Update colors in Render after the config is read syncLayerWidgetLayer(); m_auimgr.Update(); if( m_globalFootprintTable == NULL ) { try { m_globalFootprintTable = new FP_LIB_TABLE(); if( !FP_LIB_TABLE::LoadGlobalTable( *m_globalFootprintTable ) ) { DisplayInfoMessage( this, wxT( "You have run Pcbnew for the first time using the " "new footprint library table method for finding " "footprints. Pcbnew has either copied the default " "table or created an empty table in your home " "folder. You must first configure the library " "table to include all footprint libraries not " "included with KiCad. See the \"Footprint Library " "Table\" section of the CvPcb documentation for " "more information." ) ); } } catch( IO_ERROR ioe ) { wxString msg; msg.Printf( _( "An error occurred attempting to load the global footprint library " "table:\n\n%s" ), GetChars( ioe.errorText ) ); DisplayError( this, msg ); } } setupTools(); }
PCB_EDIT_FRAME::PCB_EDIT_FRAME( KIWAY* aKiway, wxWindow* aParent ) : PCB_BASE_EDIT_FRAME( aKiway, aParent, FRAME_PCB, wxT( "Pcbnew" ), wxDefaultPosition, wxDefaultSize, KICAD_DEFAULT_DRAWFRAME_STYLE, PCB_EDIT_FRAME_NAME ) { m_FrameName = PCB_EDIT_FRAME_NAME; m_showBorderAndTitleBlock = true; // true to display sheet references m_showAxis = false; // true to display X and Y axis m_showOriginAxis = true; m_showGridAxis = true; m_SelTrackWidthBox = NULL; m_SelViaSizeBox = NULL; m_SelLayerBox = NULL; m_show_microwave_tools = false; m_show_layer_manager_tools = true; m_HotkeysZoomAndGridList = g_Board_Editor_Hokeys_Descr; m_hasAutoSave = true; m_RecordingMacros = -1; m_microWaveToolBar = NULL; m_useCmpFileForFpNames = true; #if defined(KICAD_SCRIPTING_WXPYTHON) m_pythonPanel = NULL; m_pythonPanelShow = false; #endif m_rotationAngle = 900; for ( int i = 0; i < 10; i++ ) m_Macros[i].m_Record.clear(); // Create GAL canvas SetGalCanvas( new PCB_DRAW_PANEL_GAL( this, -1, wxPoint( 0, 0 ), m_FrameSize, PCB_DRAW_PANEL_GAL::GAL_TYPE_CAIRO ) ); SetBoard( new BOARD() ); // Create the PCB_LAYER_WIDGET *after* SetBoard(): wxFont font = wxSystemSettings::GetFont( wxSYS_DEFAULT_GUI_FONT ); int pointSize = font.GetPointSize(); int screenHeight = wxSystemSettings::GetMetric( wxSYS_SCREEN_Y ); // printf( "pointSize:%d 80%%:%d\n", pointSize, (pointSize*8)/10 ); if( screenHeight <= 900 ) pointSize = (pointSize * 8) / 10; m_Layers = new PCB_LAYER_WIDGET( this, GetCanvas(), pointSize ); m_drc = new DRC( this ); // these 2 objects point to each other wxIcon icon; icon.CopyFromBitmap( KiBitmap( icon_pcbnew_xpm ) ); SetIcon( icon ); SetScreen( new PCB_SCREEN( GetPageSettings().GetSizeIU() ) ); // PCB drawings start in the upper left corner. GetScreen()->m_Center = false; // LoadSettings() *after* creating m_LayersManager, because LoadSettings() // initialize parameters in m_LayersManager LoadSettings( config() ); // Be sure options are updated m_DisplayPcbTrackFill = DisplayOpt.DisplayPcbTrackFill; m_DisplayPadFill = DisplayOpt.DisplayPadFill; m_DisplayViaFill = DisplayOpt.DisplayViaFill; m_DisplayPadNum = DisplayOpt.DisplayPadNum; m_DisplayModEdge = DisplayOpt.DisplayModEdge; m_DisplayModText = DisplayOpt.DisplayModText; SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y ); GetScreen()->AddGrid( m_UserGridSize, m_UserGridUnit, ID_POPUP_GRID_USER ); GetScreen()->SetGrid( ID_POPUP_GRID_LEVEL_1000 + m_LastGridSizeId ); if( m_canvas ) m_canvas->SetEnableBlockCommands( true ); ReCreateMenuBar(); ReCreateHToolbar(); ReCreateAuxiliaryToolbar(); ReCreateVToolbar(); ReCreateOptToolbar(); ReCreateMicrowaveVToolbar(); m_auimgr.SetManagedWindow( this ); EDA_PANEINFO horiz; horiz.HorizontalToolbarPane(); EDA_PANEINFO vert; vert.VerticalToolbarPane(); EDA_PANEINFO mesg; mesg.MessageToolbarPane(); // Create a wxAuiPaneInfo for the Layers Manager, not derived from the template. // LAYER_WIDGET is floatable, but initially docked at far right EDA_PANEINFO lyrs; lyrs.LayersToolbarPane(); lyrs.MinSize( m_Layers->GetBestSize() ); // updated in ReFillLayerWidget lyrs.BestSize( m_Layers->GetBestSize() ); lyrs.Caption( _( "Visibles" ) ); lyrs.TopDockable( false ).BottomDockable( false ); if( m_mainToolBar ) // The main horizontal toolbar { m_auimgr.AddPane( m_mainToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_mainToolBar" ) ).Top().Row( 0 ) ); } if( m_auxiliaryToolBar ) // the auxiliary horizontal toolbar, that shows track and via sizes, zoom ...) { m_auimgr.AddPane( m_auxiliaryToolBar, wxAuiPaneInfo( horiz ).Name( wxT( "m_auxiliaryToolBar" ) ).Top().Row( 1 ) ); } if( m_microWaveToolBar ) // The auxiliary vertical right toolbar (currently microwave tools) m_auimgr.AddPane( m_microWaveToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_microWaveToolBar" ) ). Right().Layer( 1 ).Position(1).Hide() ); if( m_drawToolBar ) // The main right vertical toolbar m_auimgr.AddPane( m_drawToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_VToolBar" ) ).Right().Layer( 2 ) ); // Add the layer manager ( most right side of pcbframe ) m_auimgr.AddPane( m_Layers, lyrs.Name( wxT( "m_LayersManagerToolBar" ) ).Right().Layer( 3 ) ); if( m_optionsToolBar ) // The left vertical toolbar (fast acces display options of Pcbnew) { m_auimgr.AddPane( m_optionsToolBar, wxAuiPaneInfo( vert ).Name( wxT( "m_optionsToolBar" ) ).Left().Layer(1) ); m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools ); m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools ); } if( m_canvas ) m_auimgr.AddPane( m_canvas, wxAuiPaneInfo().Name( wxT( "DrawFrame" ) ).CentrePane() ); if( GetGalCanvas() ) m_auimgr.AddPane( (wxWindow*) GetGalCanvas(), wxAuiPaneInfo().Name( wxT( "DrawFrameGal" ) ).CentrePane().Hide() ); if( m_messagePanel ) m_auimgr.AddPane( m_messagePanel, wxAuiPaneInfo( mesg ).Name( wxT( "MsgPanel" ) ).Bottom().Layer(10) ); ReFillLayerWidget(); // this is near end because contents establish size m_Layers->ReFillRender(); // Update colors in Render after the config is read syncLayerWidgetLayer(); m_auimgr.Update(); setupTools(); Zoom_Automatique( true ); }