Py::Object TopoShapeSolidPy::getMass(void) const
{
GProp_GProps props;
BRepGProp::VolumeProperties(getTopoShapePtr()->_Shape, props);
double c = props.Mass();
return Py::Float(c);
}
//=======================================================================
//function : ShapeToDouble
//purpose : used by CompareShapes::operator()
//=======================================================================
std::pair<double, double> GEOMUtils::ShapeToDouble (const TopoDS_Shape& S, bool isOldSorting)
{
// Computing of CentreOfMass
gp_Pnt GPoint;
double Len;
if (S.ShapeType() == TopAbs_VERTEX) {
GPoint = BRep_Tool::Pnt(TopoDS::Vertex(S));
Len = (double)S.Orientation();
}
else {
GProp_GProps GPr;
// BEGIN: fix for Mantis issue 0020842
if (isOldSorting) {
BRepGProp::LinearProperties(S, GPr);
}
else {
if (S.ShapeType() == TopAbs_EDGE || S.ShapeType() == TopAbs_WIRE) {
BRepGProp::LinearProperties(S, GPr);
}
else if (S.ShapeType() == TopAbs_FACE || S.ShapeType() == TopAbs_SHELL) {
BRepGProp::SurfaceProperties(S, GPr);
}
else {
BRepGProp::VolumeProperties(S, GPr);
}
}
// END: fix for Mantis issue 0020842
GPoint = GPr.CentreOfMass();
Len = GPr.Mass();
}
double dMidXYZ = GPoint.X() * 999.0 + GPoint.Y() * 99.0 + GPoint.Z() * 0.9;
return std::make_pair(dMidXYZ, Len);
}
Py::Object TopoShapeFacePy::getMass(void) const
{
GProp_GProps props;
BRepGProp::SurfaceProperties(getTopoShapePtr()->getShape(), props);
double c = props.Mass();
return Py::Float(c);
}
void CShape::CalculateVolumeAndCentre()
{
GProp_GProps System;
BRepGProp::VolumeProperties(m_shape, System);
m_volume = System.Mass();
m_centre_of_mass = System.CentreOfMass();
m_volume_found = true;
}
// Returns the surface area of this fuselage
double CCPACSFuselage::GetSurfaceArea(void)
{
const TopoDS_Shape& fusedSegments = GetLoft()->Shape();
// Calculate surface area
GProp_GProps System;
BRepGProp::SurfaceProperties(fusedSegments, System);
double myArea = System.Mass();
return myArea;
}
// Returns the volume of this fuselage
double CCPACSFuselage::GetVolume(void)
{
const TopoDS_Shape& fusedSegments = GetLoft()->Shape();
// Calculate volume
GProp_GProps System;
BRepGProp::VolumeProperties(fusedSegments, System);
double myVolume = System.Mass();
return myVolume;
}
TEST(BRepGPropTestSuite, testComputeBoxSurface)
{
// create a box, mixing integers and floats
BRepPrimAPI_MakeBox my_box(10.,10.,10.);
my_box.Build();
ASSERT_TRUE(my_box.IsDone());
// compute shape properties
GProp_GProps prop;
// the surface should be 6 faces*10*10=600
BRepGProp::SurfaceProperties(my_box.Shape(), prop);
ASSERT_GT(prop.Mass(),600.-Precision::Confusion());
ASSERT_LT(prop.Mass(),600.+Precision::Confusion());
}
TEST(BRepGPropTestSuite, testComputeBoxVolume)
{
// create a box, mixing integers and floats
BRepPrimAPI_MakeBox my_box(10.,10.,10.);
my_box.Build();
ASSERT_TRUE(my_box.IsDone());
// compute shape properties
GProp_GProps prop;
// a 10*10*10 cube should have a volume of 1000
BRepGProp::VolumeProperties(my_box.Shape(), prop);
ASSERT_GT(prop.Mass(),1000.-Precision::Confusion());
ASSERT_LT(prop.Mass(),1001.+Precision::Confusion());
}
TEST(BRepGPropTestSuite, testComputeSphereVolume)
{
// create a box, mixing integers and floats
BRepPrimAPI_MakeSphere sphere(20.);
sphere.Build();
ASSERT_TRUE(sphere.IsDone());
// compute shape properties
GProp_GProps prop;
// a sphere with a radius of 20 should have a volume of
// V = 4/3*pi*20*20*20 = 33510.321638291127
BRepGProp::VolumeProperties(sphere.Shape(), prop);
ASSERT_GT(prop.Mass(),33510.321638291127-Precision::Confusion());
ASSERT_LT(prop.Mass(),33510.321638291127+Precision::Confusion());
}
bool ChCascadeDoc::GetVolumeProperties(const TopoDS_Shape& mshape, ///< pass the shape here
const double density, ///< pass the density here
ChVector<>& center_position, ///< get the position center, respect to shape pos.
ChVector<>& inertiaXX, ///< get the inertia diagonal terms
ChVector<>& inertiaXY, ///< get the inertia extradiagonal terms
double& volume, ///< get the volume
double& mass ///< get the mass
)
{
if (mshape.IsNull())
return false;
GProp_GProps mprops;
GProp_GProps vprops;
BRepGProp::VolumeProperties(mshape,mprops);
BRepGProp::VolumeProperties(mshape,vprops);
mprops.Add(mprops, density);
mass = mprops.Mass();
volume = vprops.Mass();
gp_Pnt G = mprops.CentreOfMass ();
gp_Mat I = mprops.MatrixOfInertia();
center_position.x = G.X();
center_position.y = G.Y();
center_position.z = G.Z();
inertiaXX.x = I(1,1);
inertiaXX.y = I(2,2);
inertiaXX.z = I(3,3);
inertiaXY.x = I(1,2);
inertiaXY.y = I(1,3);
inertiaXY.z = I(2,3);
return true;
}
int main(int argc, char **argv){
TopoDS_Shape shape;
BRep_Builder builder;
GProp_GProps prop;
if (argc < 2)
{
std::cerr << "Usage: computeSurface file.brep" << std::endl;
exit(1);
}
BRepTools::Read(shape, argv[1], builder);
BRepGProp::SurfaceProperties(shape, prop);
std::cout << "Total surface of all shapes: " << prop.Mass() << std::endl;
return 0;
}
bool DrawUtil::isZeroEdge(TopoDS_Edge e)
{
TopoDS_Vertex vStart = TopExp::FirstVertex(e);
TopoDS_Vertex vEnd = TopExp::LastVertex(e);
bool result = isSamePoint(vStart,vEnd);
if (result) {
//closed edge will have same V's but non-zero length
GProp_GProps props;
BRepGProp::LinearProperties(e, props);
double len = props.Mass();
if (len > Precision::Confusion()) {
result = false;
}
}
return result;
}
//-------------------------------------------------------------------------
// Purpose : Find centroid and volume for lumps and shells
//
// Special Notes :
//
// Author : Jane Hu
//
// Creation Date : 11/30/07
//-------------------------------------------------------------------------
CubitStatus OCCBody::mass_properties( CubitVector& centroid,
double& volume )
{
if( myShells.size() == 0 && myLumps.size() == 0)
return CUBIT_FAILURE;
GProp_GProps myProps;
TopoDS_Shape* pshape = myTopoDSShape;
if(!pshape || pshape->IsNull())//single lump or shell or surface
{
DLIList<Lump*> lumps = this->lumps();
if (lumps.size() > 0)
pshape = CAST_TO(lumps.get(), OCCLump)->get_TopoDS_Solid();
}
if(!pshape || pshape->IsNull())
return CUBIT_FAILURE;
BRepGProp::VolumeProperties(*pshape, myProps);
volume = myProps.Mass();
gp_Pnt pt = myProps.CentreOfMass();
centroid.set(pt.X(), pt.Y(), pt.Z());
return CUBIT_SUCCESS;
}
//=======================================================================
//function : SortShapes
//purpose :
//=======================================================================
void GEOMUtils::SortShapes (TopTools_ListOfShape& SL,
const Standard_Boolean isOldSorting)
{
#ifdef STD_SORT_ALGO
std::vector<TopoDS_Shape> aShapesVec;
aShapesVec.reserve(SL.Extent());
TopTools_ListIteratorOfListOfShape it (SL);
for (; it.More(); it.Next()) {
aShapesVec.push_back(it.Value());
}
SL.Clear();
CompareShapes shComp (isOldSorting);
std::stable_sort(aShapesVec.begin(), aShapesVec.end(), shComp);
//std::sort(aShapesVec.begin(), aShapesVec.end(), shComp);
std::vector<TopoDS_Shape>::const_iterator anIter = aShapesVec.begin();
for (; anIter != aShapesVec.end(); ++anIter) {
SL.Append(*anIter);
}
#else
// old implementation
Standard_Integer MaxShapes = SL.Extent();
TopTools_Array1OfShape aShapes (1,MaxShapes);
TColStd_Array1OfInteger OrderInd(1,MaxShapes);
TColStd_Array1OfReal MidXYZ (1,MaxShapes); //X,Y,Z;
TColStd_Array1OfReal Length (1,MaxShapes); //X,Y,Z;
// Computing of CentreOfMass
Standard_Integer Index;
GProp_GProps GPr;
gp_Pnt GPoint;
TopTools_ListIteratorOfListOfShape it(SL);
for (Index=1; it.More(); Index++)
{
TopoDS_Shape S = it.Value();
SL.Remove( it ); // == it.Next()
aShapes(Index) = S;
OrderInd.SetValue (Index, Index);
if (S.ShapeType() == TopAbs_VERTEX) {
GPoint = BRep_Tool::Pnt( TopoDS::Vertex( S ));
Length.SetValue( Index, (Standard_Real) S.Orientation());
}
else {
// BEGIN: fix for Mantis issue 0020842
if (isOldSorting) {
BRepGProp::LinearProperties (S, GPr);
}
else {
if (S.ShapeType() == TopAbs_EDGE || S.ShapeType() == TopAbs_WIRE) {
BRepGProp::LinearProperties (S, GPr);
}
else if (S.ShapeType() == TopAbs_FACE || S.ShapeType() == TopAbs_SHELL) {
BRepGProp::SurfaceProperties(S, GPr);
}
else {
BRepGProp::VolumeProperties(S, GPr);
}
}
// END: fix for Mantis issue 0020842
GPoint = GPr.CentreOfMass();
Length.SetValue(Index, GPr.Mass());
}
MidXYZ.SetValue(Index, GPoint.X()*999.0 + GPoint.Y()*99.0 + GPoint.Z()*0.9);
//cout << Index << " L: " << Length(Index) << "CG: " << MidXYZ(Index) << endl;
}
// Sorting
Standard_Integer aTemp;
Standard_Boolean exchange, Sort = Standard_True;
Standard_Real tol = Precision::Confusion();
while (Sort)
{
Sort = Standard_False;
for (Index=1; Index < MaxShapes; Index++)
{
exchange = Standard_False;
Standard_Real dMidXYZ = MidXYZ(OrderInd(Index)) - MidXYZ(OrderInd(Index+1));
Standard_Real dLength = Length(OrderInd(Index)) - Length(OrderInd(Index+1));
if ( dMidXYZ >= tol ) {
// cout << "MidXYZ: " << MidXYZ(OrderInd(Index))<< " > " <<MidXYZ(OrderInd(Index+1))
// << " d: " << dMidXYZ << endl;
exchange = Standard_True;
}
else if ( Abs(dMidXYZ) < tol && dLength >= tol ) {
// cout << "Length: " << Length(OrderInd(Index))<< " > " <<Length(OrderInd(Index+1))
// << " d: " << dLength << endl;
exchange = Standard_True;
}
else if ( Abs(dMidXYZ) < tol && Abs(dLength) < tol &&
aShapes(OrderInd(Index)).ShapeType() <= TopAbs_FACE) {
// PAL17233
// equal values possible on shapes such as two halves of a sphere and
// a membrane inside the sphere
Bnd_Box box1,box2;
BRepBndLib::Add( aShapes( OrderInd(Index) ), box1 );
if ( box1.IsVoid() ) continue;
BRepBndLib::Add( aShapes( OrderInd(Index+1) ), box2 );
Standard_Real dSquareExtent = box1.SquareExtent() - box2.SquareExtent();
if ( dSquareExtent >= tol ) {
// cout << "SquareExtent: " << box1.SquareExtent()<<" > "<<box2.SquareExtent() << endl;
exchange = Standard_True;
}
else if ( Abs(dSquareExtent) < tol ) {
Standard_Real aXmin, aYmin, aZmin, aXmax, aYmax, aZmax, val1, val2;
box1.Get(aXmin, aYmin, aZmin, aXmax, aYmax, aZmax);
val1 = (aXmin+aXmax)*999 + (aYmin+aYmax)*99 + (aZmin+aZmax)*0.9;
box2.Get(aXmin, aYmin, aZmin, aXmax, aYmax, aZmax);
val2 = (aXmin+aXmax)*999 + (aYmin+aYmax)*99 + (aZmin+aZmax)*0.9;
//exchange = val1 > val2;
if ((val1 - val2) >= tol) {
exchange = Standard_True;
}
//cout << "box: " << val1<<" > "<<val2 << endl;
}
}
if (exchange)
{
// cout << "exchange " << Index << " & " << Index+1 << endl;
aTemp = OrderInd(Index);
OrderInd(Index) = OrderInd(Index+1);
OrderInd(Index+1) = aTemp;
Sort = Standard_True;
}
}
}
for (Index=1; Index <= MaxShapes; Index++)
SL.Append( aShapes( OrderInd(Index) ));
#endif
}
double IfcGeom::face_area(const TopoDS_Face& f) {
GProp_GProps prop;
BRepGProp::SurfaceProperties(f,prop);
return prop.Mass();
}
//----------------------------------------------------------------
// Function: TopoDS_Shape level function to update the core Body
// for any Boolean operation of the body.
// Author: Jane Hu
//----------------------------------------------------------------
CubitStatus OCCBody::update_OCC_entity(TopoDS_Shape& old_shape,
TopoDS_Shape& new_shape,
BRepBuilderAPI_MakeShape *op,
LocOpe_SplitShape* sp)
{
//set the Shells
TopTools_IndexedMapOfShape M;
TopExp::MapShapes(old_shape, TopAbs_SOLID, M);
TopTools_IndexedMapOfShape M_new;
TopExp::MapShapes(new_shape, TopAbs_SOLID, M_new);
TopTools_ListOfShape shapes;
TopoDS_Shape shape;
CubitBoolean updated = CUBIT_FALSE;
if(!old_shape.IsNull() && old_shape.ShapeType() == TopAbs_COMPOUND &&
!new_shape.IsNull() && new_shape.ShapeType() == TopAbs_COMPOUND &&
!old_shape.IsSame(new_shape))
{
//By updating underling solids, shells etc., the old_shape will get changed.
//trying to make sure the the number of each entity in the old and new
//shapes are the same, which means that nothing is delete, that we can
//update the map here. Otherwise, when deleting solids, it'll delete the
//the old body and create new body. This is Ok for general boolean operation //except imprint when booleans are called, usually the original body are
// supposed to be kept.
updated = CUBIT_TRUE;
OCCQueryEngine::instance()->update_OCC_map(old_shape, new_shape);
}
DLIList<int> new_solid_nums;
DLIList<int> unfound_nums;
for(int ii=1; ii<=M.Extent(); ii++)
{
TopoDS_Solid solid = TopoDS::Solid(M(ii));
TopTools_ListOfShape shapes;
if(op)
{
shapes.Assign(op->Modified(solid));
if(shapes.Extent() == 0)
shapes.Assign(op->Generated(solid));
}
else if(sp)
shapes.Assign(sp->DescendantShapes(solid));
if (shapes.Extent() == 1)
shape = shapes.First();
else if(shapes.Extent() > 1)
{
//update all attributes first.
TopTools_ListIteratorOfListOfShape it;
it.Initialize(shapes);
for(; it.More(); it.Next())
{
shape = it.Value();
OCCQueryEngine::instance()->copy_attributes(solid, shape);
}
shape = shapes.First();
}
else if(op->IsDeleted(solid))
{
if (M_new.Extent()== 1 && ii == 1)
shape = M_new(1);
else if(M_new.Extent()== 1 && ii > 1)
shape.Nullify();
else if(M_new.Extent() > 1)
{
GProp_GProps myProps;
BRepGProp::VolumeProperties(solid, myProps);
double bf_mass = myProps.Mass();
gp_Pnt old_center = myProps.CentreOfMass();
CubitBoolean found = CUBIT_FALSE;
for(int l = 1; l <= M_new.Extent(); l++)
{
BRepGProp::VolumeProperties(M_new(l), myProps);
double af_mass = myProps.Mass();
double dTol = OCCQueryEngine::instance()->get_sme_resabs_tolerance();
if(fabs(bf_mass-af_mass) < dTol) //unchanged
{
gp_Pnt new_center = myProps.CentreOfMass();
if(new_center.IsEqual(old_center, dTol))
{
found = CUBIT_TRUE;
shape = M_new(l);
new_solid_nums.append(l);
break;
}
}
}
if(!found)
{
unfound_nums.append(ii);
continue;
}
}
else
shape.Nullify();
}
else
{
shape = solid;
continue;
}
if(shapes.Extent() > 0 || (op && op->IsDeleted(solid)))
OCCLump::update_OCC_entity(solid, shape, op, sp);
}
if( unfound_nums.size() == 1 )
{
TopoDS_Solid solid = TopoDS::Solid(M(unfound_nums.get()));
for(int kk = 1; kk <= M_new.Extent(); kk++)
{
if(!new_solid_nums.move_to(kk))
{
shape = M_new(kk);
break;
}
}
OCCLump::update_OCC_entity(solid, shape, op, sp);
}
else if(unfound_nums.size() > 1)
{
shape.Nullify();
for(int kk = 1; kk <=unfound_nums.size(); kk++)
{
TopoDS_Solid solid = TopoDS::Solid(M(unfound_nums.get_and_step()));
OCCLump::update_OCC_entity(solid, shape, op, sp);
}
}
if(!old_shape.IsSame(new_shape) && !updated)
OCCQueryEngine::instance()->update_OCC_map(old_shape, new_shape);
return CUBIT_SUCCESS;
}
//----------------------------------------------------------------
// Function: TopoDS_Shape level function to update the core Surface
// for any movement or Boolean operation of the body.
// Author: Jane Hu
//----------------------------------------------------------------
CubitStatus OCCSurface::update_OCC_entity(TopoDS_Face& old_surface,
TopoDS_Shape& new_surface,
BRepBuilderAPI_MakeShape *op,
TopoDS_Vertex* removed_vertex,
LocOpe_SplitShape* sp)
{
//set the Wires
TopTools_IndexedMapOfShape M, M2;
TopoDS_Shape shape, shape2, shape_edge, shape_vertex;
TopExp::MapShapes(old_surface, TopAbs_WIRE, M);
TopTools_ListOfShape shapes;
BRepFilletAPI_MakeFillet2d* test_op = NULL;
for (int ii=1; ii<=M.Extent(); ii++)
{
TopoDS_Wire wire = TopoDS::Wire(M(ii));
TopTools_ListOfShape shapes;
if(op)
{
test_op = dynamic_cast<BRepFilletAPI_MakeFillet2d*>(op);
if(!test_op)
shapes.Assign(op->Modified(wire));
if(shapes.Extent() == 0)
shapes.Assign(op->Generated(wire));
if(!new_surface.IsNull())
TopExp::MapShapes(new_surface,TopAbs_WIRE, M2);
}
else if(sp)
shapes.Assign(sp->DescendantShapes(wire));
if (shapes.Extent() == 1)
{
shape = shapes.First();
if(M2.Extent() == 1)
{
shape2 = TopoDS::Wire(M2(1));
if(!shape.IsSame(shape2))
shape = shape2;
}
else if(M2.Extent() > 1)
shape.Nullify();
}
else if(shapes.Extent() > 1)
shape.Nullify();
else if(op->IsDeleted(wire) || shapes.Extent() == 0)
{
TopTools_IndexedMapOfShape M_new;
TopExp::MapShapes(new_surface, TopAbs_WIRE, M_new);
if (M_new.Extent()== 1)
shape = M_new(1);
else
shape.Nullify();
}
else
{
shape = wire;
continue;
}
//set curves
BRepTools_WireExplorer Ex;
for(Ex.Init(wire); Ex.More();Ex.Next())
{
TopoDS_Edge edge = Ex.Current();
if(op && !test_op)
{
shapes.Assign(op->Modified(edge));
if(shapes.Extent() == 0)
shapes.Assign(op->Generated(edge));
}
else if(sp)
shapes.Assign(sp->DescendantShapes(edge));
if (shapes.Extent() == 1)
{
//in fillet creating mothod, one edge could generated a face, so check
//it here.
TopAbs_ShapeEnum type = shapes.First().TShape()->ShapeType();
if(type != TopAbs_EDGE)
shape_edge.Nullify();
else
shape_edge = shapes.First();
}
else if (shapes.Extent() > 1)
{
//update all attributes first.
TopTools_ListIteratorOfListOfShape it;
it.Initialize(shapes);
for(; it.More(); it.Next())
{
shape_edge = it.Value();
OCCQueryEngine::instance()->copy_attributes(edge, shape_edge);
}
shape_edge.Nullify();
}
else if (op->IsDeleted(edge))
shape_edge.Nullify();
else if (test_op)
{
if(!test_op->IsModified(edge))
shape_edge = edge;
else
shape_edge = (test_op->Modified(edge)).First();
}
else
shape_edge = edge;
//update vertex
TopoDS_Vertex vertex = Ex.CurrentVertex();
shapes.Clear();
if(test_op)
assert(removed_vertex != NULL);
if(op && ! test_op )
shapes.Assign(op->Modified(vertex));
else if(sp)
shapes.Assign(sp->DescendantShapes(vertex));
if (shapes.Extent() == 1)
shape_vertex = shapes.First();
else if(shapes.Extent() > 1)
{
//update all attributes first.
TopTools_ListIteratorOfListOfShape it;
it.Initialize(shapes);
for(; it.More(); it.Next())
{
shape_vertex = it.Value();
OCCQueryEngine::instance()->copy_attributes(vertex, shape_vertex);
}
shape_vertex.Nullify() ;
}
else if(op->IsDeleted(vertex) || (test_op && vertex.IsSame( *removed_vertex)))
shape_vertex.Nullify() ;
else
shape_vertex = vertex;
if(!vertex.IsSame(shape_vertex) )
OCCQueryEngine::instance()->update_OCC_map(vertex, shape_vertex);
if (!edge.IsSame(shape_edge))
OCCQueryEngine::instance()->update_OCC_map(edge, shape_edge);
}
if (!wire.IsSame(shape))
OCCQueryEngine::instance()->update_OCC_map(wire, shape);
}
double dTOL = OCCQueryEngine::instance()->get_sme_resabs_tolerance();
if (!old_surface.IsSame(new_surface))
{
TopAbs_ShapeEnum shapetype = TopAbs_SHAPE;
if(!new_surface.IsNull())
shapetype = new_surface.TShape()->ShapeType();
if(shapetype == TopAbs_FACE || new_surface.IsNull())
OCCQueryEngine::instance()->update_OCC_map(old_surface, new_surface);
else
{
TopTools_IndexedMapOfShape M;
TopExp::MapShapes(new_surface, TopAbs_FACE, M);
TopoDS_Shape new_shape;
if(M.Extent() == 1)
new_shape = M(1);
else if(M.Extent() > 1)
{
for(int i = 1; i <= M.Extent(); i++)
{
GProp_GProps myProps;
BRepGProp::SurfaceProperties(old_surface, myProps);
double orig_mass = myProps.Mass();
gp_Pnt orig_pnt = myProps.CentreOfMass();
BRepGProp::SurfaceProperties(M(i), myProps);
double after_mass = myProps.Mass();
gp_Pnt after_pnt = myProps.CentreOfMass();
if(fabs(-after_mass + orig_mass) <= dTOL &&
orig_pnt.IsEqual(after_pnt, dTOL))
{
new_shape = M(i);
break;
}
}
}
OCCQueryEngine::instance()->update_OCC_map(old_surface, new_shape);
}
}
return CUBIT_SUCCESS;
}
double OCCFace::area() {
GProp_GProps prop;
BRepGProp::SurfaceProperties(this->getShape(), prop);
return prop.Mass();
}
bool Constraint::getPoints(std::vector<Base::Vector3d> &points, std::vector<Base::Vector3d> &normals, int * scale) const
{
std::vector<App::DocumentObject*> Objects = References.getValues();
std::vector<std::string> SubElements = References.getSubValues();
// Extract geometry from References
TopoDS_Shape sh;
for (std::size_t i = 0; i < Objects.size(); i++) {
App::DocumentObject* obj = Objects[i];
Part::Feature* feat = static_cast<Part::Feature*>(obj);
const Part::TopoShape& toposhape = feat->Shape.getShape();
if (toposhape.isNull())
return false;
sh = toposhape.getSubShape(SubElements[i].c_str());
if (sh.ShapeType() == TopAbs_VERTEX) {
const TopoDS_Vertex& vertex = TopoDS::Vertex(sh);
gp_Pnt p = BRep_Tool::Pnt(vertex);
points.push_back(Base::Vector3d(p.X(), p.Y(), p.Z()));
normals.push_back(NormalDirection.getValue());
//OvG: Scale by whole object mass in case of a vertex
GProp_GProps props;
BRepGProp::VolumeProperties(toposhape.getShape(), props);
double lx = props.Mass();
*scale = this->calcDrawScaleFactor(sqrt(lx)*0.5); //OvG: setup draw scale for constraint
}
else if (sh.ShapeType() == TopAbs_EDGE) {
BRepAdaptor_Curve curve(TopoDS::Edge(sh));
double fp = curve.FirstParameter();
double lp = curve.LastParameter();
GProp_GProps props;
BRepGProp::LinearProperties(TopoDS::Edge(sh), props);
double l = props.Mass();
// Create points with 10 units distance, but at least one at the beginning and end of the edge
int steps;
if (l >= 30) //OvG: Increase 10 units distance proportionately to l for larger objects.
{
*scale = this->calcDrawScaleFactor(l); //OvG: setup draw scale for constraint
steps = (int)round(l / (10*( *scale)));
steps = steps<3?3:steps;
}
else if (l >= 20)
{
steps = (int)round(l / 10);
*scale = this->calcDrawScaleFactor(); //OvG: setup draw scale for constraint
}
else
{
steps = 1;
*scale = this->calcDrawScaleFactor(); //OvG: setup draw scale for constraint
}
steps = steps>CONSTRAINTSTEPLIMIT?CONSTRAINTSTEPLIMIT:steps; //OvG: Place upper limit on number of steps
double step = (lp - fp) / steps;
for (int i = 0; i < steps + 1; i++) {
gp_Pnt p = curve.Value(i * step);
points.push_back(Base::Vector3d(p.X(), p.Y(), p.Z()));
normals.push_back(NormalDirection.getValue());
}
}
else if (sh.ShapeType() == TopAbs_FACE) {
TopoDS_Face face = TopoDS::Face(sh);
// Surface boundaries
BRepAdaptor_Surface surface(face);
double ufp = surface.FirstUParameter();
double ulp = surface.LastUParameter();
double vfp = surface.FirstVParameter();
double vlp = surface.LastVParameter();
double l;
double lv, lu;
// Surface normals
BRepGProp_Face props(face);
gp_Vec normal;
gp_Pnt center;
// Get an estimate for the number of arrows by finding the average length of curves
Handle(Adaptor3d_HSurface) hsurf;
hsurf = new BRepAdaptor_HSurface(surface);
Adaptor3d_IsoCurve isoc(hsurf);
try {
isoc.Load(GeomAbs_IsoU, ufp);
l = GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion());
}
catch (const Standard_Failure&) {
gp_Pnt p1 = hsurf->Value(ufp, vfp);
gp_Pnt p2 = hsurf->Value(ufp, vlp);
l = p1.Distance(p2);
}
try {
isoc.Load(GeomAbs_IsoU, ulp);
lv = (l + GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion()))/2.0;
}
catch (const Standard_Failure&) {
gp_Pnt p1 = hsurf->Value(ulp, vfp);
gp_Pnt p2 = hsurf->Value(ulp, vlp);
lv = (l + p1.Distance(p2))/2.0;
}
try {
isoc.Load(GeomAbs_IsoV, vfp);
l = GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion());
}
catch (const Standard_Failure&) {
gp_Pnt p1 = hsurf->Value(ufp, vfp);
gp_Pnt p2 = hsurf->Value(ulp, vfp);
l = p1.Distance(p2);
}
try {
isoc.Load(GeomAbs_IsoV, vlp);
lu = (l + GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion()))/2.0;
}
catch (const Standard_Failure&) {
gp_Pnt p1 = hsurf->Value(ufp, vlp);
gp_Pnt p2 = hsurf->Value(ulp, vlp);
lu = (l + p1.Distance(p2))/2.0;
}
int stepsv;
if (lv >= 30) //OvG: Increase 10 units distance proportionately to lv for larger objects.
{
*scale = this->calcDrawScaleFactor(lv,lu); //OvG: setup draw scale for constraint
stepsv = (int)round(lv / (10*( *scale)));
stepsv = stepsv<3?3:stepsv;
}
else if (lv >= 20.0)
{
stepsv = (int)round(lv / 10);
*scale = this->calcDrawScaleFactor(); //OvG: setup draw scale for constraint
}
else
{
stepsv = 2; // Minimum of three arrows to ensure (as much as possible) that at least one is displayed
*scale = this->calcDrawScaleFactor(); //OvG: setup draw scale for constraint
}
stepsv = stepsv>CONSTRAINTSTEPLIMIT?CONSTRAINTSTEPLIMIT:stepsv; //OvG: Place upper limit on number of steps
int stepsu;
if (lu >= 30) //OvG: Increase 10 units distance proportionately to lu for larger objects.
{
*scale = this->calcDrawScaleFactor(lv,lu); //OvG: setup draw scale for constraint
stepsu = (int)round(lu / (10*( *scale)));
stepsu = stepsu<3?3:stepsu;
}
else if (lu >= 20.0)
{
stepsu = (int)round(lu / 10);
*scale = this->calcDrawScaleFactor(); //OvG: setup draw scale for constraint
}
else
{
stepsu = 2;
*scale = this->calcDrawScaleFactor(); //OvG: setup draw scale for constraint
}
stepsu = stepsu>CONSTRAINTSTEPLIMIT?CONSTRAINTSTEPLIMIT:stepsu; //OvG: Place upper limit on number of steps
double stepv = (vlp - vfp) / stepsv;
double stepu = (ulp - ufp) / stepsu;
// Create points and normals
for (int i = 0; i < stepsv + 1; i++) {
for (int j = 0; j < stepsu + 1; j++) {
double v = vfp + i * stepv;
double u = ufp + j * stepu;
gp_Pnt p = surface.Value(u, v);
BRepClass_FaceClassifier classifier(face, p, Precision::Confusion());
if (classifier.State() != TopAbs_OUT) {
points.push_back(Base::Vector3d(p.X(), p.Y(), p.Z()));
props.Normal(u, v,center,normal);
normal.Normalize();
normals.push_back(Base::Vector3d(normal.X(), normal.Y(), normal.Z()));
}
}
}
}
}
return true;
}
double CFace::Area()const{
GProp_GProps System;
BRepGProp::SurfaceProperties(m_topods_face,System);
return System.Mass();
}
double GetVolume(TopoDS_Shape shape)
{
GProp_GProps System;
BRepGProp::VolumeProperties(shape, System);
return System.Mass();
}
double IfcGeom::shape_volume(const TopoDS_Shape& s) {
GProp_GProps prop;
BRepGProp::VolumeProperties(s, prop);
return prop.Mass();
}
std::vector<TopoDS_Wire> EdgeWalker::sortStrip(std::vector<TopoDS_Wire> fw, bool includeBiggest)
{
std::vector<TopoDS_Wire> sortedWires = sortWiresBySize(fw,false); //biggest 1st
if (!sortedWires.size()) {
Base::Console().Log("INFO - DVP::extractFaces - no sorted Wires!\n");
return sortedWires; // might happen in the middle of changes?
}
//find the largest wire (OuterWire of graph) using bbox
Bnd_Box bigBox;
if (sortedWires.size() && !sortedWires.front().IsNull()) {
BRepBndLib::Add(sortedWires.front(), bigBox);
bigBox.SetGap(0.0);
}
std::vector<std::size_t> toBeChecked;
std::vector<TopoDS_Wire>::iterator it = sortedWires.begin() + 1;
for (; it != sortedWires.end(); it++) {
if (!(*it).IsNull()) {
Bnd_Box littleBox;
BRepBndLib::Add((*it), littleBox);
littleBox.SetGap(0.0);
if (bigBox.SquareExtent() > littleBox.SquareExtent()) {
break;
} else {
auto position = std::distance( sortedWires.begin(), it ); //get an index from iterator
toBeChecked.push_back(position);
}
}
}
//unfortuneately, faces can have same bbox, but not be same size. need to weed out biggest
if (toBeChecked.size() == 0) {
//nobody had as big a bbox as first element of sortedWires
if (!includeBiggest) {
sortedWires.erase(sortedWires.begin());
}
} else if (toBeChecked.size() > 0) {
BRepBuilderAPI_MakeFace mkFace(sortedWires.front());
const TopoDS_Face& face = mkFace.Face();
GProp_GProps props;
BRepGProp::SurfaceProperties(face, props);
double bigArea = props.Mass();
unsigned int bigIndex = 0;
for (unsigned int idx = 0; idx < toBeChecked.size(); idx++) {
int iCheck = toBeChecked.at(idx);
BRepBuilderAPI_MakeFace mkFace2(sortedWires.at(iCheck));
const TopoDS_Face& face2 = mkFace2.Face();
BRepGProp::SurfaceProperties(face2, props);
double area = props.Mass();
if (area > bigArea) {
bigArea = area;
bigIndex = iCheck;
}
}
if (bigIndex == 0) { //first wire is the biggest
if (!includeBiggest) {
sortedWires.erase(sortedWires.begin());
}
} else { //first wire is not the biggest
TopoDS_Wire bigWire = *(sortedWires.begin() + bigIndex);
sortedWires.erase(sortedWires.begin() + bigIndex);
if (includeBiggest) {
sortedWires.insert(sortedWires.begin(),bigWire); //doesn't happen often
}
}
}
return sortedWires;
}
const bool Constraint::getPoints(std::vector<Base::Vector3d> &points, std::vector<Base::Vector3d> &normals) const
{
std::vector<App::DocumentObject*> Objects = References.getValues();
std::vector<std::string> SubElements = References.getSubValues();
// Extract geometry from References
TopoDS_Shape sh;
for (std::size_t i = 0; i < Objects.size(); i++) {
App::DocumentObject* obj = Objects[i];
Part::Feature* feat = static_cast<Part::Feature*>(obj);
const Part::TopoShape& toposhape = feat->Shape.getShape();
if (toposhape.isNull())
return false;
sh = toposhape.getSubShape(SubElements[i].c_str());
if (sh.ShapeType() == TopAbs_VERTEX) {
const TopoDS_Vertex& vertex = TopoDS::Vertex(sh);
gp_Pnt p = BRep_Tool::Pnt(vertex);
points.push_back(Base::Vector3d(p.X(), p.Y(), p.Z()));
normals.push_back(NormalDirection.getValue());
} else if (sh.ShapeType() == TopAbs_EDGE) {
BRepAdaptor_Curve curve(TopoDS::Edge(sh));
double fp = curve.FirstParameter();
double lp = curve.LastParameter();
GProp_GProps props;
BRepGProp::LinearProperties(TopoDS::Edge(sh), props);
double l = props.Mass();
// Create points with 10 units distance, but at least one at the beginning and end of the edge
int steps;
if (l >= 20)
steps = (int)round(l / 10);
else
steps = 1;
double step = (lp - fp) / steps;
for (int i = 0; i < steps + 1; i++) {
gp_Pnt p = curve.Value(i * step);
points.push_back(Base::Vector3d(p.X(), p.Y(), p.Z()));
normals.push_back(NormalDirection.getValue());
}
} else if (sh.ShapeType() == TopAbs_FACE) {
TopoDS_Face face = TopoDS::Face(sh);
// Surface boundaries
BRepAdaptor_Surface surface(face);
double ufp = surface.FirstUParameter();
double ulp = surface.LastUParameter();
double vfp = surface.FirstVParameter();
double vlp = surface.LastVParameter();
// Surface normals
BRepGProp_Face props(face);
gp_Vec normal;
gp_Pnt center;
// Get an estimate for the number of arrows by finding the average length of curves
Handle(Adaptor3d_HSurface) hsurf;
hsurf = new BRepAdaptor_HSurface(surface);
Adaptor3d_IsoCurve isoc(hsurf, GeomAbs_IsoU, vfp);
double l = GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion());
isoc.Load(GeomAbs_IsoU, vlp);
double lv = (l + GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion()))/2.0;
isoc.Load(GeomAbs_IsoV, ufp);
l = GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion());
isoc.Load(GeomAbs_IsoV, ulp);
double lu = (l + GCPnts_AbscissaPoint::Length(isoc, Precision::Confusion()))/2.0;
int stepsv;
if (lv >= 20.0)
stepsv = (int)round(lv / 10);
else
stepsv = 2; // Minimum of three arrows to ensure (as much as possible) that at least one is displayed
int stepsu;
if (lu >= 20.0)
stepsu = (int)round(lu / 10);
else
stepsu = 2;
double stepv = (vlp - vfp) / stepsv;
double stepu = (ulp - ufp) / stepsu;
// Create points and normals
for (int i = 0; i < stepsv + 1; i++) {
for (int j = 0; j < stepsu + 1; j++) {
double v = vfp + i * stepv;
double u = ufp + j * stepu;
gp_Pnt p = surface.Value(u, v);
BRepClass_FaceClassifier classifier(face, p, Precision::Confusion());
if (classifier.State() != TopAbs_OUT) {
points.push_back(Base::Vector3d(p.X(), p.Y(), p.Z()));
props.Normal(u, v,center,normal);
normal.Normalize();
normals.push_back(Base::Vector3d(normal.X(), normal.Y(), normal.Z()));
}
}
}
}
}
return true;
}
bool NETGENPlugin_NETGEN_3D::Evaluate(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape,
MapShapeNbElems& aResMap)
{
int nbtri = 0, nbqua = 0;
double fullArea = 0.0;
for (TopExp_Explorer exp(aShape, TopAbs_FACE); exp.More(); exp.Next()) {
TopoDS_Face F = TopoDS::Face( exp.Current() );
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
MapShapeNbElemsItr anIt = aResMap.find(sm);
if( anIt==aResMap.end() ) {
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nbtri += Max(aVec[SMDSEntity_Triangle],aVec[SMDSEntity_Quad_Triangle]);
nbqua += Max(aVec[SMDSEntity_Quadrangle],aVec[SMDSEntity_Quad_Quadrangle]);
GProp_GProps G;
BRepGProp::SurfaceProperties(F,G);
double anArea = G.Mass();
fullArea += anArea;
}
// collect info from edges
int nb0d_e = 0, nb1d_e = 0;
bool IsQuadratic = false;
bool IsFirst = true;
TopTools_MapOfShape tmpMap;
for (TopExp_Explorer exp(aShape, TopAbs_EDGE); exp.More(); exp.Next()) {
TopoDS_Edge E = TopoDS::Edge(exp.Current());
if( tmpMap.Contains(E) )
continue;
tmpMap.Add(E);
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
if( anIt==aResMap.end() ) {
SMESH_ComputeErrorPtr& smError = aSubMesh->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,
"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nb0d_e += aVec[SMDSEntity_Node];
nb1d_e += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
if(IsFirst) {
IsQuadratic = (aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]);
IsFirst = false;
}
}
tmpMap.Clear();
double ELen_face = sqrt(2.* ( fullArea/(nbtri+nbqua*2) ) / sqrt(3.0) );
double ELen_vol = pow( 72, 1/6. ) * pow( _maxElementVolume, 1/3. );
double ELen = Min(ELen_vol,ELen_face*2);
GProp_GProps G;
BRepGProp::VolumeProperties(aShape,G);
double aVolume = G.Mass();
double tetrVol = 0.1179*ELen*ELen*ELen;
double CoeffQuality = 0.9;
int nbVols = (int)aVolume/tetrVol/CoeffQuality;
int nb1d_f = (nbtri*3 + nbqua*4 - nb1d_e) / 2;
int nb1d_in = (int) ( nbVols*6 - nb1d_e - nb1d_f ) / 5;
std::vector<int> aVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
if( IsQuadratic ) {
aVec[SMDSEntity_Node] = nb1d_in/6 + 1 + nb1d_in;
aVec[SMDSEntity_Quad_Tetra] = nbVols - nbqua*2;
aVec[SMDSEntity_Quad_Pyramid] = nbqua;
}
else {
aVec[SMDSEntity_Node] = nb1d_in/6 + 1;
aVec[SMDSEntity_Tetra] = nbVols - nbqua*2;
aVec[SMDSEntity_Pyramid] = nbqua;
}
SMESH_subMesh *sm = aMesh.GetSubMesh(aShape);
aResMap.insert(std::make_pair(sm,aVec));
return true;
}
//=============================================================================
bool NETGENPlugin_Mesher::Evaluate(MapShapeNbElems& aResMap)
{
#ifdef WNT
netgen::MeshingParameters& mparams = netgen::GlobalMeshingParameters();
#else
netgen::MeshingParameters& mparams = netgen::mparam;
#endif
// -------------------------
// Prepare OCC geometry
// -------------------------
netgen::OCCGeometry occgeo;
list< SMESH_subMesh* > meshedSM;
PrepareOCCgeometry( occgeo, _shape, *_mesh, &meshedSM );
bool tooManyElems = false;
const int hugeNb = std::numeric_limits<int>::max() / 100;
// ----------------
// evaluate 1D
// ----------------
// pass 1D simple parameters to NETGEN
int nbs = 0;
if ( _simpleHyp ) {
if ( int nbSeg = _simpleHyp->GetNumberOfSegments() ) {
nbs = nbSeg;
// nb of segments
mparams.segmentsperedge = nbSeg + 0.1;
mparams.maxh = occgeo.boundingbox.Diam();
mparams.grading = 0.01;
}
else {
// segment length
mparams.segmentsperedge = 1;
mparams.maxh = _simpleHyp->GetLocalLength();
}
}
TopTools_DataMapOfShapeInteger EdgesMap;
double fullLen = 0.0;
double fullNbSeg = 0;
for (TopExp_Explorer exp(_shape, TopAbs_EDGE); exp.More(); exp.Next()) {
TopoDS_Edge E = TopoDS::Edge( exp.Current() );
if( EdgesMap.IsBound(E) )
continue;
SMESH_subMesh *sm = _mesh->GetSubMesh(E);
std::vector<int> aVec(SMDSEntity_Last, 0);
double aLen = SMESH_Algo::EdgeLength(E);
fullLen += aLen;
int nb1d = nbs;
tooManyElems = ( aLen/hugeNb > mparams.maxh );
if(nb1d==0 && !tooManyElems) {
nb1d = (int)( aLen/mparams.maxh + 1 );
}
if ( tooManyElems ) // avoid FPE
{
aVec[SMDSEntity_Node] = hugeNb;
aVec[ mparams.secondorder > 0 ? SMDSEntity_Quad_Edge : SMDSEntity_Edge] = hugeNb;
}
else
{
fullNbSeg += nb1d;
if( mparams.secondorder > 0 ) {
aVec[SMDSEntity_Node] = 2*nb1d - 1;
aVec[SMDSEntity_Quad_Edge] = nb1d;
}
else {
aVec[SMDSEntity_Node] = nb1d - 1;
aVec[SMDSEntity_Edge] = nb1d;
}
}
aResMap.insert(std::make_pair(sm,aVec));
EdgesMap.Bind(E,nb1d);
}
// ----------------
// evaluate 2D
// ----------------
if ( _simpleHyp ) {
if ( double area = _simpleHyp->GetMaxElementArea() ) {
// face area
mparams.maxh = sqrt(2. * area/sqrt(3.0));
mparams.grading = 0.4; // moderate size growth
}
else {
// length from edges
mparams.maxh = fullLen/fullNbSeg;
mparams.grading = 0.2; // slow size growth
}
mparams.maxh = min( mparams.maxh, occgeo.boundingbox.Diam()/2 );
}
for (TopExp_Explorer exp(_shape, TopAbs_FACE); exp.More(); exp.Next())
{
TopoDS_Face F = TopoDS::Face( exp.Current() );
SMESH_subMesh *sm = _mesh->GetSubMesh(F);
GProp_GProps G;
BRepGProp::SurfaceProperties(F,G);
double anArea = G.Mass();
tooManyElems = tooManyElems || ( anArea/hugeNb > mparams.maxh*mparams.maxh );
int nb1d = 0;
if ( !tooManyElems )
for (TopExp_Explorer exp1(F,TopAbs_EDGE); exp1.More(); exp1.Next())
nb1d += EdgesMap.Find(exp1.Current());
int nbFaces = tooManyElems ? hugeNb : int( 4*anArea / mparams.maxh*mparams.maxh*sqrt(3.));
int nbNodes = tooManyElems ? hugeNb : (( nbFaces*3 - (nb1d-1)*2 ) / 6 + 1 );
std::vector<int> aVec(SMDSEntity_Last, 0);
if( mparams.secondorder > 0 ) {
int nb1d_in = (nbFaces*3 - nb1d) / 2;
aVec[SMDSEntity_Node] = nbNodes + nb1d_in;
aVec[SMDSEntity_Quad_Triangle] = nbFaces;
}
else {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Triangle] = nbFaces;
}
aResMap.insert(std::make_pair(sm,aVec));
}
// ----------------
// evaluate 3D
// ----------------
if(_isVolume) {
// pass 3D simple parameters to NETGEN
const NETGENPlugin_SimpleHypothesis_3D* simple3d =
dynamic_cast< const NETGENPlugin_SimpleHypothesis_3D* > ( _simpleHyp );
if ( simple3d ) {
if ( double vol = simple3d->GetMaxElementVolume() ) {
// max volume
mparams.maxh = pow( 72, 1/6. ) * pow( vol, 1/3. );
mparams.maxh = min( mparams.maxh, occgeo.boundingbox.Diam()/2 );
}
else {
// using previous length from faces
}
mparams.grading = 0.4;
}
GProp_GProps G;
BRepGProp::VolumeProperties(_shape,G);
double aVolume = G.Mass();
double tetrVol = 0.1179*mparams.maxh*mparams.maxh*mparams.maxh;
tooManyElems = tooManyElems || ( aVolume/hugeNb > tetrVol );
int nbVols = tooManyElems ? hugeNb : int(aVolume/tetrVol);
int nb1d_in = int(( nbVols*6 - fullNbSeg ) / 6 );
std::vector<int> aVec(SMDSEntity_Last, 0 );
if ( tooManyElems ) // avoid FPE
{
aVec[SMDSEntity_Node] = hugeNb;
aVec[ mparams.secondorder > 0 ? SMDSEntity_Quad_Tetra : SMDSEntity_Tetra] = hugeNb;
}
else
{
if( mparams.secondorder > 0 ) {
aVec[SMDSEntity_Node] = nb1d_in/3 + 1 + nb1d_in;
aVec[SMDSEntity_Quad_Tetra] = nbVols;
}
else {
aVec[SMDSEntity_Node] = nb1d_in/3 + 1;
aVec[SMDSEntity_Tetra] = nbVols;
}
}
SMESH_subMesh *sm = _mesh->GetSubMesh(_shape);
aResMap.insert(std::make_pair(sm,aVec));
}
return true;
}
double OCCWire::length() {
GProp_GProps prop;
BRepGProp::LinearProperties(this->getWire(), prop);
return prop.Mass();
}
//-------------------------------------------------------------------------
// Purpose : Returns the area of the Surface
//
//-------------------------------------------------------------------------
double OCCSurface::measure()
{
GProp_GProps myProps;
BRepGProp::SurfaceProperties(*myTopoDSFace, myProps);
return myProps.Mass();
}
bool NETGENPlugin_NETGEN_2D_ONLY::Evaluate(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape,
MapShapeNbElems& aResMap)
{
TopoDS_Face F = TopoDS::Face(aShape);
if(F.IsNull())
return false;
// collect info from edges
int nb0d = 0, nb1d = 0;
bool IsQuadratic = false;
bool IsFirst = true;
double fullLen = 0.0;
TopTools_MapOfShape tmpMap;
for (TopExp_Explorer exp(F, TopAbs_EDGE); exp.More(); exp.Next()) {
TopoDS_Edge E = TopoDS::Edge(exp.Current());
if( tmpMap.Contains(E) )
continue;
tmpMap.Add(E);
SMESH_subMesh *aSubMesh = aMesh.GetSubMesh(exp.Current());
MapShapeNbElemsItr anIt = aResMap.find(aSubMesh);
if( anIt==aResMap.end() ) {
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated",this));
return false;
}
std::vector<int> aVec = (*anIt).second;
nb0d += aVec[SMDSEntity_Node];
nb1d += Max(aVec[SMDSEntity_Edge],aVec[SMDSEntity_Quad_Edge]);
double aLen = SMESH_Algo::EdgeLength(E);
fullLen += aLen;
if(IsFirst) {
IsQuadratic = (aVec[SMDSEntity_Quad_Edge] > aVec[SMDSEntity_Edge]);
IsFirst = false;
}
}
tmpMap.Clear();
// compute edge length
double ELen = 0;
if (_hypLengthFromEdges || (!_hypLengthFromEdges && !_hypMaxElementArea)) {
if ( nb1d > 0 )
ELen = fullLen / nb1d;
}
if ( _hypMaxElementArea ) {
double maxArea = _hypMaxElementArea->GetMaxArea();
ELen = sqrt(2. * maxArea/sqrt(3.0));
}
GProp_GProps G;
BRepGProp::SurfaceProperties(F,G);
double anArea = G.Mass();
const int hugeNb = numeric_limits<int>::max()/10;
if ( anArea / hugeNb > ELen*ELen )
{
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
smError.reset( new SMESH_ComputeError(COMPERR_ALGO_FAILED,"Submesh can not be evaluated.\nToo small element length",this));
return false;
}
int nbFaces = (int) ( anArea / ( ELen*ELen*sqrt(3.) / 4 ) );
int nbNodes = (int) ( ( nbFaces*3 - (nb1d-1)*2 ) / 6 + 1 );
std::vector<int> aVec(SMDSEntity_Last);
for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
if( IsQuadratic ) {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Quad_Triangle] = nbFaces;
}
else {
aVec[SMDSEntity_Node] = nbNodes;
aVec[SMDSEntity_Triangle] = nbFaces;
}
SMESH_subMesh *sm = aMesh.GetSubMesh(F);
aResMap.insert(std::make_pair(sm,aVec));
return true;
}
