void Etherform::interpolateTick(F32 dt)
{
Parent::interpolateTick(dt);
if(dt != 0.0f)
{
Point3F pos = delta.pos + delta.posVec * dt;
Point3F rot = delta.rot + delta.rotVec * dt;
this->setRenderPosition(pos, rot, dt);
// update laser trails...
for( S32 i=0; i < NUM_ETHERFORM_LASERTRAILS; i++ )
{
if(mLaserTrailList[i])
mLaserTrailList[i]->setLastNodePos(pos);
}
// apply camera effects - is this the best place? - bramage
GameConnection* connection = GameConnection::getConnectionToServer();
if(connection->isFirstPerson())
{
GameBase* obj = connection->getControlObject();
if( obj == this )
{
MatrixF curTrans = this->getRenderTransform();
curTrans.mul( gCamFXMgr.getTrans() );
Parent::setRenderTransform( curTrans );
}
}
}
else
{
this->setRenderPosition(delta.pos, delta.rot, 0);
}
// Save last interpolation delta value.
delta.dt = dt;
}
bool LightFlareData::_testVisibility(const SceneRenderState *state, LightFlareState *flareState, U32 *outVisDelta, F32 *outOcclusionFade, Point3F *outLightPosSS)
{
// Reflections use the results from the last forward
// render so we don't need multiple queries.
if ( state->isReflectPass() )
{
*outOcclusionFade = flareState->occlusion;
*outVisDelta = Sim::getCurrentTime() - flareState->visChangedTime;
return flareState->visible;
}
// Initialize it to something first.
*outOcclusionFade = 0;
// First check to see if the flare point
// is on scren at all... if not then return
// the last result.
const Point3F &lightPos = flareState->lightMat.getPosition();
const RectI &viewport = GFX->getViewport();
MatrixF projMatrix;
state->getCameraFrustum().getProjectionMatrix(&projMatrix);
if( state->isReflectPass() )
projMatrix = state->getSceneManager()->getNonClipProjection();
bool onScreen = MathUtils::mProjectWorldToScreen( lightPos, outLightPosSS, viewport, GFX->getWorldMatrix(), projMatrix );
// It is onscreen, so raycast as a simple occlusion test.
const LightInfo *lightInfo = flareState->lightInfo;
const bool isVectorLight = lightInfo->getType() == LightInfo::Vector;
const bool useOcclusionQuery = isVectorLight ? flareState->worldRadius > 0.0f : mOcclusionRadius > 0.0f;
bool needsRaycast = true;
// NOTE: if hardware does not support HOQ it will return NULL
// and we will retry every time but there is not currently a good place
// for one-shot initialization of LightFlareState
if ( useOcclusionQuery )
{
// Always treat light as onscreen if using HOQ
// it will be faded out if offscreen anyway.
onScreen = true;
needsRaycast = false;
// Test the hardware queries for rendered pixels.
U32 pixels = 0, fullPixels = 0;
GFXOcclusionQuery::OcclusionQueryStatus status;
flareState->occlusionQuery.getLastStatus( false, &status, &pixels );
flareState->fullPixelQuery.getLastStatus( false, NULL, &fullPixels );
if ( status == GFXOcclusionQuery::NotOccluded && fullPixels != 0 )
*outOcclusionFade = mClampF( (F32)pixels / (F32)fullPixels, 0.0f, 1.0f );
if( !flareState->occlusionQuery.isWaiting() )
{
// Setup the new queries.
RenderPassManager *rpm = state->getRenderPass();
OccluderRenderInst *ri = rpm->allocInst<OccluderRenderInst>();
ri->type = RenderPassManager::RIT_Occluder;
ri->query = flareState->occlusionQuery.getQuery();
ri->query2 = flareState->fullPixelQuery.getQuery();
ri->isSphere = true;
ri->position = lightPos;
if ( isVectorLight && flareState->worldRadius > 0.0f )
ri->scale.set( flareState->worldRadius );
else
ri->scale.set( mOcclusionRadius );
ri->orientation = rpm->allocUniqueXform( lightInfo->getTransform() );
// Submit the queries.
state->getRenderPass()->addInst( ri );
}
}
const Point3F &camPos = state->getCameraPosition();
if ( needsRaycast )
{
// Use a raycast to determine occlusion.
GameConnection *conn = GameConnection::getConnectionToServer();
if ( !conn )
return false;
const bool fps = conn->isFirstPerson();
GameBase *control = conn->getControlObject();
if ( control && fps )
control->disableCollision();
RayInfo rayInfo;
if ( !gClientContainer.castRay( camPos, lightPos, LosMask, &rayInfo ) )
*outOcclusionFade = 1.0f;
if ( control && fps )
control->enableCollision();
}
// The raycast and hardware occlusion query only calculate if
// the flare is on screen... if does not account for being
// partially offscreen.
//
// The code here clips a box against the viewport to
// get an approximate percentage of onscreen area.
//
F32 worldRadius = flareState->worldRadius > 0 ? flareState->worldRadius : mOcclusionRadius;
if ( worldRadius > 0.0f )
{
F32 dist = ( camPos - lightPos ).len();
F32 pixelRadius = state->projectRadius(dist, worldRadius);
RectI visRect( outLightPosSS->x - pixelRadius, outLightPosSS->y - pixelRadius,
pixelRadius * 2.0f, pixelRadius * 2.0f );
F32 fullArea = visRect.area();
if ( visRect.intersect( viewport ) )
{
F32 visArea = visRect.area();
*outOcclusionFade *= visArea / fullArea;
onScreen = true;
}
else
*outOcclusionFade = 0.0f;
}
const bool lightVisible = onScreen && *outOcclusionFade > 0.0f;
// To perform a fade in/out when we gain or lose visibility
// we must update/store the visibility state and time.
const U32 currentTime = Sim::getCurrentTime();
if ( lightVisible != flareState->visible )
{
flareState->visible = lightVisible;
flareState->visChangedTime = currentTime;
}
// Return the visibility delta for time fading.
*outVisDelta = currentTime - flareState->visChangedTime;
// Store the final occlusion fade so that it can
// be used in reflection rendering later.
flareState->occlusion = *outOcclusionFade;
return lightVisible;
}
void LightFlareData::prepRender( SceneState *state, LightFlareState *flareState )
{
PROFILE_SCOPE( LightFlareData_prepRender );
// No elements then nothing to render.
if ( mElementCount == 0 )
return;
// We need these all over the place later.
const Point3F &camPos = state->getCameraPosition();
const RectI &viewport = GFX->getViewport();
const Point3F &lightPos = flareState->lightMat.getPosition();
LightInfo *lightInfo = flareState->lightInfo;
bool isVectorLight = lightInfo->getType() == LightInfo::Vector;
// Perform visibility testing on the light...
// Project the light position from world to screen space, we need this
// position later, and it tells us if it is actually onscreen.
Point3F lightPosSS;
bool onscreen = MathUtils::mProjectWorldToScreen( lightPos, &lightPosSS, viewport, GFX->getWorldMatrix(), gClientSceneGraph->getNonClipProjection() );
U32 visDelta = U32_MAX;
U32 fadeOutTime = 20;
U32 fadeInTime = 125;
// Fade factor based on amount of occlusion.
F32 occlusionFade = 1.0f;
bool lightVisible = true;
if ( !state->isReflectPass() )
{
// It is onscreen, so raycast as a simple occlusion test.
U32 losMask = STATIC_COLLISION_MASK |
ShapeBaseObjectType |
StaticTSObjectType |
ItemObjectType |
PlayerObjectType;
GameConnection *conn = GameConnection::getConnectionToServer();
if ( !conn )
return;
bool needsRaycast = true;
// NOTE: if hardware does not support HOQ it will return NULL
// and we will retry every time but there is not currently a good place
// for one-shot initialization of LightFlareState
if ( flareState->occlusionQuery == NULL )
flareState->occlusionQuery = GFX->createOcclusionQuery();
if ( flareState->fullPixelQuery == NULL )
flareState->fullPixelQuery = GFX->createOcclusionQuery();
if ( flareState->occlusionQuery &&
( ( isVectorLight && flareState->worldRadius > 0.0f ) ||
( !isVectorLight && mOcclusionRadius > 0.0f ) ) )
{
// Always treat light as onscreen if using HOQ
// it will be faded out if offscreen anyway.
onscreen = true;
U32 pixels = -1;
GFXOcclusionQuery::OcclusionQueryStatus status = flareState->occlusionQuery->getStatus( true, &pixels );
String str = flareState->occlusionQuery->statusToString( status );
Con::setVariable( "$Flare::OcclusionStatus", str.c_str() );
Con::setIntVariable( "$Flare::OcclusionVal", pixels );
if ( status == GFXOcclusionQuery::Occluded )
occlusionFade = 0.0f;
if ( status != GFXOcclusionQuery::Unset )
needsRaycast = false;
RenderPassManager *pass = state->getRenderPass();
OccluderRenderInst *ri = pass->allocInst<OccluderRenderInst>();
Point3F scale( Point3F::One );
if ( isVectorLight && flareState->worldRadius > 0.0f )
scale *= flareState->worldRadius;
else
scale *= mOcclusionRadius;
ri->type = RenderPassManager::RIT_Occluder;
ri->query = flareState->occlusionQuery;
ri->query2 = flareState->fullPixelQuery;
ri->position = lightPos;
ri->scale = scale;
ri->orientation = pass->allocUniqueXform( lightInfo->getTransform() );
ri->isSphere = true;
state->getRenderPass()->addInst( ri );
if ( status == GFXOcclusionQuery::NotOccluded )
{
U32 fullPixels;
flareState->fullPixelQuery->getStatus( true, &fullPixels );
occlusionFade = (F32)pixels / (F32)fullPixels;
// Approximation of the full pixel count rather than doing
// two queries, but it is not very accurate.
/*
F32 dist = ( camPos - lightPos ).len();
F32 radius = scale.x;
radius = ( radius / dist ) * state->getWorldToScreenScale().y;
occlusionFade = (F32)pixels / (4.0f * radius * radius);
occlusionFade = mClampF( occlusionFade, 0.0f, 1.0f );
*/
}
}
Con::setFloatVariable( "$Flare::OcclusionFade", occlusionFade );
if ( needsRaycast )
{
// Use a raycast to determine occlusion.
bool fps = conn->isFirstPerson();
GameBase *control = conn->getControlObject();
if ( control && fps )
control->disableCollision();
RayInfo rayInfo;
if ( gClientContainer.castRayRendered( camPos, lightPos, losMask, &rayInfo ) )
occlusionFade = 0.0f;
if ( control && fps )
control->enableCollision();
}
lightVisible = onscreen && occlusionFade > 0.0f;
// To perform a fade in/out when we gain or lose visibility
// we must update/store the visibility state and time.
U32 currentTime = Sim::getCurrentTime();
if ( lightVisible != flareState->visible )
{
flareState->visible = lightVisible;
flareState->visChangedTime = currentTime;
}
// Save this in the state so that we have it during the reflect pass.
flareState->occlusion = occlusionFade;
visDelta = currentTime - flareState->visChangedTime;
}
else // state->isReflectPass()
{
occlusionFade = flareState->occlusion;
lightVisible = flareState->visible;
visDelta = Sim::getCurrentTime() - flareState->visChangedTime;
}
// We can only skip rendering if the light is not visible, and it
// has elapsed the fadeOutTime.
if ( !lightVisible && visDelta > fadeOutTime )
return;
// In a reflection we only render the elements with zero distance.
U32 elementCount = mElementCount;
if ( state->isReflectPass() )
{
elementCount = 0;
for ( ; elementCount < mElementCount; elementCount++ )
{
if ( mElementDist[elementCount] > 0.0f )
break;
}
}
if ( elementCount == 0 )
return;
// A bunch of preparatory math before generating verts...
const Point2I &vpExtent = viewport.extent;
Point3F viewportExtent( vpExtent.x, vpExtent.y, 1.0f );
Point2I halfViewportExtentI( viewport.extent / 2 );
Point3F halfViewportExtentF( (F32)halfViewportExtentI.x * 0.5f, (F32)halfViewportExtentI.y, 0.0f );
Point3F screenCenter( 0,0,0 );
Point3F oneOverViewportExtent( 1.0f / viewportExtent.x, 1.0f / viewportExtent.y, 1.0f );
lightPosSS.y -= viewport.point.y;
lightPosSS *= oneOverViewportExtent;
lightPosSS = ( lightPosSS * 2.0f ) - Point3F::One;
lightPosSS.y = -lightPosSS.y;
lightPosSS.z = 0.0f;
Point3F flareVec( screenCenter - lightPosSS );
F32 flareLength = flareVec.len();
flareVec.normalizeSafe();
Point3F basePoints[4];
basePoints[0] = Point3F( -0.5, 0.5, 0.0 );
basePoints[1] = Point3F( -0.5, -0.5, 0.0 );
basePoints[2] = Point3F( 0.5, -0.5, 0.0 );
basePoints[3] = Point3F( 0.5, 0.5, 0.0 );
Point3F rotatedBasePoints[4];
rotatedBasePoints[0] = basePoints[0];
rotatedBasePoints[1] = basePoints[1];
rotatedBasePoints[2] = basePoints[2];
rotatedBasePoints[3] = basePoints[3];
Point3F fvec( -1, 0, 0 );
F32 rot = mAcos( mDot( fvec, flareVec ) );
Point3F rvec( 0, -1, 0 );
rot *= mDot( rvec, flareVec ) > 0.0f ? 1.0f : -1.0f;
vectorRotateZAxis( rotatedBasePoints[0], rot );
vectorRotateZAxis( rotatedBasePoints[1], rot );
vectorRotateZAxis( rotatedBasePoints[2], rot );
vectorRotateZAxis( rotatedBasePoints[3], rot );
// Here we calculate a the light source's influence on the effect's size
// and brightness...
// Scale based on the current light brightness compared to its normal output.
F32 lightSourceBrightnessScale = lightInfo->getBrightness() / flareState->fullBrightness;
// Scale based on world space distance from camera to light source.
F32 lightSourceWSDistanceScale = ( isVectorLight ) ? 1.0f : getMin( 10.0f / ( lightPos - camPos ).len(), 1.5f );
// Scale based on screen space distance from screen position of light source to the screen center.
F32 lightSourceSSDistanceScale = ( 1.5f - ( lightPosSS - screenCenter ).len() ) / 1.5f;
// Scale based on recent visibility changes, fading in or out.
F32 fadeInOutScale = 1.0f;
if ( lightVisible && visDelta < fadeInTime && flareState->occlusion )
fadeInOutScale = (F32)visDelta / (F32)fadeInTime;
else if ( !lightVisible && visDelta < fadeOutTime )
fadeInOutScale = 1.0f - (F32)visDelta / (F32)fadeOutTime;
// This combined scale influences the size of all elements this effect renders.
// Note we also add in a scale that is user specified in the Light.
F32 lightSourceIntensityScale = lightSourceBrightnessScale *
lightSourceWSDistanceScale *
lightSourceSSDistanceScale *
fadeInOutScale *
flareState->scale *
occlusionFade;
// The baseColor which modulates the color of all elements.
ColorF baseColor;
if ( flareState->fullBrightness == 0.0f )
baseColor = ColorF::BLACK;
else
// These are the factors which affect the "alpha" of the flare effect.
// Modulate more in as appropriate.
baseColor = ColorF::WHITE * lightSourceBrightnessScale * occlusionFade;
// Fill in the vertex buffer...
const U32 vertCount = 4 * elementCount;
if ( flareState->vertBuffer.isNull() ||
flareState->vertBuffer->mNumVerts != vertCount )
flareState->vertBuffer.set( GFX, vertCount, GFXBufferTypeDynamic );
GFXVertexPCT *pVert = flareState->vertBuffer.lock();
const Point2I &widthHeightI = mFlareTexture.getWidthHeight();
Point2F oneOverTexSize( 1.0f / (F32)widthHeightI.x, 1.0f / (F32)widthHeightI.y );
for ( U32 i = 0; i < elementCount; i++ )
{
Point3F *basePos = mElementRotate[i] ? rotatedBasePoints : basePoints;
ColorF elementColor( baseColor * mElementTint[i] );
if ( mElementUseLightColor[i] )
elementColor *= lightInfo->getColor();
Point3F elementPos;
elementPos = lightPosSS + flareVec * mElementDist[i] * flareLength;
elementPos.z = 0.0f;
F32 maxDist = 1.5f;
F32 elementDist = mSqrt( ( elementPos.x * elementPos.x ) + ( elementPos.y * elementPos.y ) );
F32 distanceScale = ( maxDist - elementDist ) / maxDist;
distanceScale = 1.0f;
const RectF &elementRect = mElementRect[i];
Point3F elementSize( elementRect.extent.x, elementRect.extent.y, 1.0f );
elementSize *= mElementScale[i] * distanceScale * mScale * lightSourceIntensityScale;
if ( elementSize.x < 100.0f )
{
F32 alphaScale = mPow( elementSize.x / 100.0f, 2 );
elementColor *= alphaScale;
}
elementColor.clamp();
Point2F texCoordMin, texCoordMax;
texCoordMin = elementRect.point * oneOverTexSize;
texCoordMax = ( elementRect.point + elementRect.extent ) * oneOverTexSize;
pVert->color = elementColor;
pVert->point = ( basePos[0] * elementSize * oneOverViewportExtent ) + elementPos;
pVert->texCoord.set( texCoordMin.x, texCoordMax.y );
pVert++;
pVert->color = elementColor;
pVert->point = ( basePos[1] * elementSize * oneOverViewportExtent ) + elementPos;
pVert->texCoord.set( texCoordMax.x, texCoordMax.y );
pVert++;
pVert->color = elementColor;
pVert->point = ( basePos[2] * elementSize * oneOverViewportExtent ) + elementPos;
pVert->texCoord.set( texCoordMax.x, texCoordMin.y );
pVert++;
pVert->color = elementColor;
pVert->point = ( basePos[3] * elementSize * oneOverViewportExtent ) + elementPos;
pVert->texCoord.set( texCoordMin.x, texCoordMin.y );
pVert++;
}
flareState->vertBuffer.unlock();
// Create and submit the render instance...
RenderPassManager *renderManager = state->getRenderPass();
ParticleRenderInst *ri = renderManager->allocInst<ParticleRenderInst>();
ri->vertBuff = &flareState->vertBuffer;
ri->primBuff = &mFlarePrimBuffer;
ri->translucentSort = true;
ri->type = RenderPassManager::RIT_Particle;
ri->sortDistSq = ( lightPos - camPos ).lenSquared();
ri->modelViewProj = &MatrixF::Identity;
ri->bbModelViewProj = ri->modelViewProj;
ri->count = elementCount;
// Only draw the light flare in high-res mode, never off-screen mode
ri->systemState = ParticleRenderInst::AwaitingHighResDraw;
ri->blendStyle = ParticleRenderInst::BlendGreyscale;
ri->diffuseTex = &*(mFlareTexture);
ri->softnessDistance = 1.0f;
// Sort by texture too.
ri->defaultKey = ri->diffuseTex ? (U32)ri->diffuseTex : (U32)ri->vertBuff;
renderManager->addInst( ri );
}