static void OnPaintComboPopupListItem(WindowControl * Sender, LKSurface& Surface) {
if (Sender) {
if (ComboListPopup->ComboPopupDrawListIndex >= 0 &&
ComboListPopup->ComboPopupDrawListIndex < ComboListPopup->ComboPopupItemCount) {
// Fill Background with Highlight color if Selected Item
if (!Sender->HasFocus() && ComboListPopup->ComboPopupItemIndex == ComboListPopup->ComboPopupDrawListIndex) {
RECT rc = Sender->GetClientRect();
Surface.FillRect(&rc, LKBrush_Higlighted);
}
const int w = Sender->GetWidth();
const int h = Sender->GetHeight();
const TCHAR* szText = ComboListPopup->ComboPopupItemList[ComboListPopup->ComboPopupDrawListIndex]->StringValueFormatted;
Surface.SetBackgroundTransparent();
Surface.SetTextColor(RGB_BLACK);
const int xText = 3 * ScreenScale;
const int yText = (h - Surface.GetTextHeight(szText)) / 2;
Surface.DrawTextClip(xText, yText, szText, w - ScreenScale * 5);
}
}
}
static void OnProgressPaint(WindowControl * Sender, LKSurface& Surface) {
RECT PrintAreaR = Sender->GetClientRect();
const auto oldFont = Surface.SelectObject(MapWindowBoldFont);
Surface.FillRect(&PrintAreaR, LKBrush_Petrol);
// Create text area
// we cannot use LKPen here because they are not still initialised for startup menu. no problem
LKPen hP(PEN_SOLID,NIBLSCALE(1),RGB_GREEN);
auto ohP = Surface.SelectObject(hP);
const auto ohB = Surface.SelectObject(LKBrush_Petrol);
Surface.Rectangle(PrintAreaR.left,PrintAreaR.top,PrintAreaR.right,PrintAreaR.bottom);
Surface.SelectObject(ohP);
hP.Release();
hP.Create(PEN_SOLID,NIBLSCALE(1),RGB_BLACK);
ohP = Surface.SelectObject(hP);
Surface.SelectObject(LK_HOLLOW_BRUSH);
InflateRect(&PrintAreaR, -NIBLSCALE(2), -NIBLSCALE(2));
Surface.Rectangle(PrintAreaR.left,PrintAreaR.top,PrintAreaR.right,PrintAreaR.bottom);
Surface.SetTextColor(RGB_WHITE);
Surface.SetBackgroundTransparent();
InflateRect(&PrintAreaR, -NIBLSCALE(2), -NIBLSCALE(2));
const TCHAR* text = Sender->GetCaption();
Surface.DrawText(text, &PrintAreaR, DT_VCENTER|DT_SINGLELINE);
Surface.SelectObject(ohB);
Surface.SelectObject(ohP);
Surface.SelectObject(oldFont);
}
int MapWindow::SharedTopView(LKSurface& Surface, DiagrammStruct* psDia , double fAS_Bearing, double fWP_Bearing)
{
int iOldDisplayOrientation = DisplayOrientation;
DiagrammStruct m_Dia = *psDia;
const RECT& rct = m_Dia.rc;
unsigned short getsideviewpage=GetSideviewPage();
LKASSERT(getsideviewpage<NUMBER_OF_SHARED_MULTIMAPS);
LKASSERT(Current_Multimap_SizeY!=SIZE0);
DisplayOrientation = GetMMNorthUp(getsideviewpage);
switch(GetMMNorthUp(getsideviewpage))
{
case TRACKUP:
break;
case NORTHUP:
default:
m_Dia.fXMin = -m_Dia.fXMax;
break;
}
double fOldScale = zoom.Scale();
const auto hfOld = Surface.SelectObject(LK8PanelUnitFont);
if(zoom.AutoZoom())
zoom.AutoZoom(false);
double fFact = 1.25 ;
#ifdef INIT_CASE
switch(ScreenSize) {
case ss800x480:
fFact=0.750;
break;
case ss640x480:
fFact=0.938;
break;
case ss480x272:
fFact=0.708;
break;
case ss400x240:
fFact=0.750;
break;
case ss320x240:
fFact=0.938;
break;
case ss480x800:
fFact=1.250;
break;
case ss480x640:
fFact=1.250;
break;
case ss272x480:
fFact=1.250;
break;
case ss240x400:
fFact=1.250;
break;
case ss240x320:
fFact=1.250;
break;
default:
fFact=1.000;
break;
}
#endif
if((ScreenSizeX > 0) && (ScreenSizeY > 0))
{
if(ScreenSizeX > ScreenSizeY)
fFact = (double)ScreenSizeY/(double)ScreenSizeX * 1.250;
}
PanLatitude = DrawInfo.Latitude;
PanLongitude = DrawInfo.Longitude;
switch(GetMMNorthUp(getsideviewpage))
{
case TRACKUP:
DisplayAngle = AngleLimit360(fAS_Bearing +270.0);
DisplayAircraftAngle = AngleLimit360(fWP_Bearing);
break;
case NORTHUP:
default:
DisplayAngle = 0;
if( getsideviewpage == IM_HEADING || getsideviewpage==IM_VISUALGLIDE)
DisplayAircraftAngle = AngleLimit360(fAS_Bearing);
else
DisplayAircraftAngle = AngleLimit360(DrawInfo.TrackBearing);
break;
}
int iOldLocator = EnableThermalLocator;
EnableThermalLocator =0;
/*******/
#warning "wrong place for do that, always bad idea to change layout inside drawing fonctions !"
MapWindow::ChangeDrawRect(rct); // set new area for terrain and topology
/*******/
zoom.RequestedScale((m_Dia.fXMax -m_Dia.fXMin) * fFact * (DISTANCEMODIFY)/10.0f);
POINT Orig = { CalcDistanceCoordinat(0.0, (DiagrammStruct*) &m_Dia),(rct.bottom-rct.top)/2};
POINT Orig_Aircraft= {0,0};
zoom.ModifyMapScale();
zoom.UpdateMapScale();
const ScreenProjection _Proj = CalculateScreenPositions( Orig, rct, &Orig_Aircraft);
CalculateScreenPositionsAirspace(rct, _Proj);
bool terrainpainted=false;
if (IsMultimapTerrain() && DerivedDrawInfo.TerrainValid && RasterTerrain::isTerrainLoaded() ) {
LKTextBlack=false;
BlackScreen=false;
LockTerrainDataGraphics();
DrawTerrain(Surface, rct, _Proj, GetAzimuth(), 40.0);
UnlockTerrainDataGraphics();
terrainpainted=true;
} else {
// We fill up the background wity chosen empty map color
Surface.FillRect(&rct, hInvBackgroundBrush[BgMapColor]);
// We force LK painting black values on screen depending on the background color in use
// blackscreen would force everything to be painted white, instead
LKTextBlack=BgMapColorTextBlack[BgMapColor];
if (BgMapColor>6 ) BlackScreen=true;
else BlackScreen=false;
}
ResetLabelDeclutter();
// We reduce screen cluttering for some cases..
short olddecluttermode=DeclutterMode;
if (Current_Multimap_SizeY==SIZE4) goto _nomoredeclutter;
if (Current_Multimap_SizeY<SIZE3) {
DeclutterMode+=2;
} else {
if (Current_Multimap_SizeY==SIZE3)
DeclutterMode++;
}
if (DeclutterMode>dmVeryHigh) DeclutterMode=dmVeryHigh;
_nomoredeclutter:
if (IsMultimapTopology()) {
// Do not print topology labels, to be used with another config later!
// SaturateLabelDeclutter();
DrawTopology(Surface, rct, _Proj);
} else {
// No topology is desired, but terrain requires water areas nevertheless
if (terrainpainted) {
DrawTopology(Surface, rct, _Proj, true); // water only!
}
}
if (IsMultimapAirspace()) {
DrawAirSpace(Surface, rct, _Proj); // full screen, to hide clipping effect on low border
}
if (Flags_DrawTask && MapSpaceMode!=MSM_MAPASP && ValidTaskPoint(ActiveTaskPoint) && ValidTaskPoint(1)) {
DrawTaskAAT(Surface, rct);
DrawTask(Surface, rct, _Proj, Orig_Aircraft);
}
if (IsMultimapWaypoints()) {
DrawWaypointsNew(Surface,rct);
}
if (Flags_DrawFAI)
DrawFAIOptimizer(Surface, rct, _Proj, Orig_Aircraft);
DeclutterMode=olddecluttermode; // set it back correctly
/* THIS STUFF DOES NOT WORK IN SHARED MAPS, YET
NEED FIXING LatLon2Screen for shared maps using Sideview
#ifdef GTL2
if (((FinalGlideTerrain == 2) || (FinalGlideTerrain == 4)) &&
DerivedDrawInfo.TerrainValid)
DrawTerrainAbove(hdc, rct);
#endif
*/
//
// Stuff for MAPTRK only (M1)
if (MapSpaceMode==MSM_MAPTRK) {
if(IsMultimapTerrain() || IsMultimapTopology() ) {
if (FinalGlideTerrain && DerivedDrawInfo.TerrainValid)
DrawGlideThroughTerrain(Surface, rct, _Proj);
}
if (extGPSCONNECT)
DrawBearing(Surface, rct, _Proj);
// Wind arrow
if (IsMultimapOverlaysGauges())
DrawWindAtAircraft2(Surface, Orig_Aircraft, rct);
}
if (MapSpaceMode==MSM_MAPWPT) {
if (extGPSCONNECT)
DrawBearing(Surface, rct, _Proj);
}
switch(GetMMNorthUp(getsideviewpage)) {
case NORTHUP:
default:
DrawCompass( Surface, rct, 0);
break;
case TRACKUP:
if(getsideviewpage == IM_HEADING || getsideviewpage == IM_VISUALGLIDE)
DrawCompass( Surface, rct, DrawInfo.TrackBearing-90.0);
else
DrawCompass( Surface, rct, DisplayAngle);
break;
}
/****************************************************************************************************
* draw vertical line
****************************************************************************************************/
POINT line[2];
line[0].x = rct.left;
line[0].y = Orig_Aircraft.y-1;
line[1].x = rct.right;
line[1].y = line[0].y;
switch(GetMMNorthUp(getsideviewpage))
{
case TRACKUP:
// Are we are not topview fullscreen?
if (Current_Multimap_SizeY<SIZE4 && !(MapSpaceMode==MSM_VISUALGLIDE)) {
Surface.DrawDashLine(NIBLSCALE(1), line[0], line[1], Sideview_TextColor, rct);
} else {
if (TrackBar) {
DrawHeadUpLine(Surface, Orig, rct, psDia->fXMin ,psDia->fXMax);
if (ISGAAIRCRAFT) DrawFuturePos(Surface, Orig, rct, true);
}
}
break;
case NORTHUP:
default:
if (TrackBar) {
DrawHeadUpLine(Surface, Orig, rct, psDia->fXMin ,psDia->fXMax);
if (ISGAAIRCRAFT) DrawFuturePos(Surface, Orig, rct, true);
}
break;
}
DrawAircraft(Surface, Orig_Aircraft);
// M3 has sideview always on, so wont apply here, and no need to check
if (Current_Multimap_SizeY==SIZE4) {
DrawMapScale(Surface,rct,0);
}
MapWindow::zoom.RequestedScale(fOldScale);
EnableThermalLocator = iOldLocator;
DisplayOrientation = iOldDisplayOrientation;
Surface.SelectObject(hfOld);
return 0;
}
void MapWindow::DrawVisualGlide(LKSurface& Surface, const DiagrammStruct& sDia) {
const RECT& rci = sDia.rc;
unsigned short numboxrows = 1;
#if BUGSTOP
LKASSERT(Current_Multimap_SizeY < SIZE4);
#endif
switch (Current_Multimap_SizeY) {
case SIZE0:
case SIZE1:
numboxrows = 3;
break;
case SIZE2:
numboxrows = 2;
break;
case SIZE3:
numboxrows = 1;
break;
case SIZE4:
return;
default:
LKASSERT(0);
break;
}
if (!ScreenLandscape) {
numboxrows++;
if (numboxrows > 3) numboxrows = 3;
}
TCHAR tmpT[30];
line1Font = LK8VisualTopFont;
line2Font = LK8VisualBotFont;
SIZE textSizeTop, textSizeBot;
Surface.SelectObject(line1Font);
_stprintf(tmpT, _T("MMMM"));
Surface.GetTextSize(tmpT, &textSizeTop);
Surface.SelectObject(line2Font);
_stprintf(tmpT, _T("55.5%s 79%s%s "), Units::GetDistanceName(), MsgToken(2179), MsgToken(2183));
Surface.GetTextSize(tmpT, &textSizeBot);
// we can cut the waypoint name, but not the value data, so we use the second row of data
// to size the box for everything.
maxtSizeX = textSizeBot.cx;
int a = (rci.right-rci.left) / (textSizeBot.cx+BOXINTERVAL);
int b = (rci.right-rci.left) - a * (textSizeBot.cx)-(BOXINTERVAL * (a + 1));
boxSizeX = textSizeBot.cx + (b / (a + 1));
boxSizeY = textSizeTop.cy + 1; // single line (wp name) + distance from bottombar
if (numboxrows > 1) {
boxSizeY += (textSizeBot.cy * (numboxrows - 1)) - NIBLSCALE(2);
if (numboxrows > 2) boxSizeY -= NIBLSCALE(1);
}
#if DEBUG_SCR
StartupStore(_T("boxX=%d boxY=%d \n"), boxSizeX, boxSizeY);
#endif
#if DEBUG_SCR
StartupStore(_T("VG AREA LTRB: %d,%d %d,%d\n"), rci.left, rci.top, rci.right, rci.bottom);
#endif
const auto oldBrush = Surface.SelectObject(LKBrush_White);
const auto oldPen = Surface.SelectObject(LK_BLACK_PEN);
BrushReference brush_back;
if (!INVERTCOLORS) {
brush_back = LKBrush_Black;
} else {
brush_back = LKBrush_Nlight;
}
Surface.FillRect(&rci, brush_back);
POINT center, p1, p2;
center.y = rci.top + (rci.bottom - rci.top) / 2;
center.x = rci.left + (rci.right - rci.left) / 2;
// numSlotX is the number items we can print horizontally.
unsigned short numSlotX = (rci.right - rci.left) / (boxSizeX + BOXINTERVAL);
if (numSlotX > MAXBSLOT) numSlotX = MAXBSLOT;
#if BUGSTOP
LKASSERT(numSlotX > 0);
#endif
if (numSlotX == 0) return;
unsigned short boxInterval = ((rci.right - rci.left)-(boxSizeX * numSlotX)) / (numSlotX + 1);
unsigned short oddoffset = ( (rci.right-rci.left) - (boxSizeX * numSlotX) - boxInterval * (numSlotX + 1)) / 2;
/*
#if BUGSTOP
// not really harmful
LKASSERT(oddoffset<=boxInterval);
#endif
*/
#if DEBUG_SCR
StartupStore(_T("numSlotX=%d ScreenSizeX=%d boxSizeX=%d interval=%d offset=%d\n"), numSlotX, ScreenSizeX, boxSizeX, boxInterval, oddoffset);
#endif
unsigned int t;
// The horizontal grid
unsigned int slotCenterX[MAXBSLOT + 1];
for (t = 0; t < numSlotX; t++) {
slotCenterX[t] = (t * boxSizeX) + boxInterval * (t + 1)+(boxSizeX / 2) + oddoffset+rci.left;
#if DEBUG_SCR
StartupStore(_T("slotCenterX[%d]=%d\n"), t, slotCenterX[t]);
#endif
}
// Vertical coordinates of each up/down subwindow, excluding center line
int upYtop = rci.top;
#if MIDCENTER
int upYbottom = center.y + (boxSizeY / 2);
int downYtop = center.y - (boxSizeY / 2);
#else
int upYbottom = center.y - CENTERYSPACE;
int downYtop = center.y + CENTERYSPACE;
#endif
int upSizeY = upYbottom - upYtop - (boxSizeY);
;
int downYbottom = rci.bottom;
int downSizeY = downYbottom - downYtop - (boxSizeY);
;
#if 0
// Reassign dynamically the vertical scale for each subwindow size
double vscale = 1000 * (100 - Current_Multimap_SizeY) / 100;
#else
// Set the vertical range
double vscale;
if (Units::GetUserAltitudeUnit() == unFeet)
vscale = (1000 / TOFEET);
else
vscale = 300.0;
#endif
Surface.SetBackgroundTransparent();
RECT trc = rci;
// Top part of visual rect, target is over us=unreachable=red
trc.top = rci.top;
trc.bottom = center.y - 1;
#ifndef DITHER
RenderSky(Surface, trc, RGB_WHITE, LKColor(150, 255, 150), GC_NO_COLOR_STEPS / 2);
#else
RenderSky(Surface, trc, RGB_WHITE, RGB_WHITE, GC_NO_COLOR_STEPS / 2);
#endif
// Bottom part, target is below us=reachable=green
trc.top = center.y + 1;
trc.bottom = rci.bottom;
#ifndef DITHER
RenderSky(Surface, trc, LKColor(255, 150, 150), RGB_WHITE, GC_NO_COLOR_STEPS / 2);
#else
RenderSky(Surface, trc, RGB_WHITE, RGB_WHITE,GC_NO_COLOR_STEPS / 2);
#endif
// Draw center line
p1.x = rci.left + 1;
p1.y = center.y;
p2.x = rci.right - 1;
p2.y = center.y;
Surface.SelectObject(LKPen_Black_N1);
Surface.DrawSolidLine(p1, p2, rci);
#if DEBUG_SCR
StartupStore(_T("... Center line: Y=%d\n"), center.y);
#endif
Surface.SelectObject(line1Font);
Surface.SelectObject(LKPen_Black_N0);
ResetVisualGlideGlobals();
short res = GetVisualGlidePoints(numSlotX);
if (res == INVALID_VALUE) {
#if DEBUG_DVG
StartupStore(_T("...... GVGP says not ready, wait..\n"));
#endif
return;
}
if (res == 0) {
#if DEBUG_DVG
StartupStore(_T("...... GVGP says no data available!\n"));
#endif
return;
}
// Print them all!
int offset = (boxSizeY / 2) + CENTERYSPACE;
LKBrush bcolor;
LKColor rgbcolor, textcolor;
int wp;
unsigned short zeroslot = 0;
double minbrgdiff = 999.0;
double minabrgdiff = 999.0; // absolute never negative
for (unsigned short n = 0; n < numSlotX; n++) {
wp = slotWpIndex[n];
if (!ValidWayPoint(wp)) {
// empty slot nothing to print
continue;
}
double brgdiff = WayPointCalc[wp].Bearing - DrawInfo.TrackBearing;
// this check is worthless
if (brgdiff < -180.0) {
brgdiff += 360.0;
} else {
if (brgdiff > 180.0) brgdiff -= 360.0;
}
double abrgdiff = brgdiff;
if (abrgdiff < 0) abrgdiff *= -1;
if (abrgdiff < minabrgdiff) {
zeroslot = n;
minabrgdiff = abrgdiff;
minbrgdiff = brgdiff;
}
}
// Draw vertical line
#define DEGRANGE 10 // degrees left and right to perfect target
if (minabrgdiff < 1) {
p1.x = slotCenterX[zeroslot];
} else {
// set fullscale range
if (minabrgdiff > DEGRANGE) {
minabrgdiff = DEGRANGE;
if (minbrgdiff < 0)
minbrgdiff = -1 * DEGRANGE;
else
minbrgdiff = DEGRANGE;
}
// we shift of course in the opposite direction
p1.x = slotCenterX[zeroslot]-(int) ((boxSizeX / (DEGRANGE * 2)) * minbrgdiff);
}
p2.x = p1.x;
p1.y = rci.top + 1;
p2.y = rci.bottom - 1;
Surface.SelectObject(LKPen_Black_N1);
Surface.DrawSolidLine(p1, p2, rci);
for (unsigned short n = 0; n < numSlotX; n++) {
wp = slotWpIndex[n];
if (!ValidWayPoint(wp)) {
// empty slot nothing to print
continue;
}
#if DEBUG_DVG
StartupStore(_T("... DVG PRINT [%d]=%d <%s>\n"), n, wp, WayPointList[wp].Name);
#endif
Sideview_VGWpt[n] = wp;
double altdiff = WayPointCalc[wp].AltArriv[AltArrivMode];
int ty;
#if DEBUG_SCR
StartupStore(_T("... wp=<%s>\n"), WayPointList[wp].Name);
#endif
// Since terrain can be approximated due to low precision maps, or waypoint position or altitude error,
// we have a common problem: we get an obstacle to get to the waypoint because it is
// positioned "BELOW" the terrain itself. We try to reduce this problem here.
#define SAFETERRAIN 50
// Positive arrival altitude for the waypoint, upper window
if (altdiff >= 0) {
if (altdiff == 0)altdiff = 1;
double d = vscale / altdiff;
if (d == 0) d = 1;
ty = upYbottom - (int) ((double) upSizeY / d)-(boxSizeY / 2);
#if DEBUG_SCR
StartupStore(_T("... upYbottom=%d upSizeY=%d / (vscale=%f/altdiff=%f = %f) =- %d ty=%d offset=%d\n"),
upYbottom, upSizeY, vscale, altdiff, d, (int) ((double) upSizeY / d), ty, offset);
#endif
if ((ty - offset) < upYtop) ty = upYtop + offset;
if ((ty + offset) > upYbottom) ty = upYbottom - offset;
#if DEBUG_SCR
StartupStore(_T("... upYtop=%d upYbottom=%d final ty=%d\n"), upYtop, upYbottom, ty);
#endif
//
// This is too confusing. We want simple colors, not shaded
// rgbcolor = MixColors( LKColor(50,255,50), LKColor(230,255,230), altdiff/(vscale-50));
//
if (altdiff <= SAFETERRAIN) {
rgbcolor = RGB_LIGHTYELLOW;
} else {
if (!CheckLandableReachableTerrainNew(&DrawInfo, &DerivedDrawInfo,
WayPointCalc[wp].Distance, WayPointCalc[wp].Bearing)) {
rgbcolor = RGB_LIGHTRED;
} else {
#ifdef DITHER
rgbcolor = RGB_WHITE;
#else
rgbcolor = RGB_LIGHTGREEN;
#endif
}
}
bcolor.Create(rgbcolor);
} else {
double d = vscale / altdiff;
if (d == 0) d = -1;
ty = downYtop - (int) ((double) downSizeY / d)+(boxSizeY / 2); // - because the left part is negative, we are really adding.
if ((ty - offset) < downYtop) ty = downYtop + offset;
if ((ty + offset) > downYbottom) ty = downYbottom - offset;
#ifdef DITHER
rgbcolor = RGB_WHITE; // negative part, no need to render dark
#else
rgbcolor = RGB_LIGHTRED;
#endif
bcolor.Create(rgbcolor);
}
TCHAR line2[40], line3[40];
TCHAR value[40], unit[30];
TCHAR name[NAME_SIZE + 1];
double ar = (WayPointCalc[wp].AltArriv[AltArrivMode] * ALTITUDEMODIFY);
_tcscpy(name, WayPointList[wp].Name);
CharUpper(name);
if (IsSafetyAltitudeInUse(wp))
textcolor = RGB_DARKBLUE;
else
textcolor = RGB_BLACK;
switch (numboxrows) {
case 0:
#if BUGSTOP
LKASSERT(0);
#endif
return;
case 1:
// 1 line: waypoint name
VGTextInBox(Surface, n, 1, name, NULL, NULL, slotCenterX[n], ty, textcolor, bcolor);
break;
case 2:
// 2 lines: waypoint name + altdiff
LKFormatAltDiff(wp, false, value, unit);
// Should we print also the GR?
if ((ar >= -9999 && ar <= 9999) && (WayPointCalc[wp].GR < MAXEFFICIENCYSHOW)) {
if (ar >= -999 && ar <= 999)
_stprintf(line2, _T("%s "), value);
else
_stprintf(line2, _T("%s "), value);
LKFormatGR(wp, false, value, unit);
_tcscat(line2, value);
} else {
_stprintf(line2, _T("%s ---"), value);
}
VGTextInBox(Surface, n, 2, name, line2, NULL, slotCenterX[n], ty, textcolor, bcolor);
break;
case 3:
// 3 lines: waypoint name + dist + altdiff
LKFormatDist(wp, false, value, unit);
_stprintf(line2, _T("%s%s"), value, unit);
LKFormatBrgDiff(wp, false, value, unit);
_stprintf(tmpT, _T(" %s%s"), value, unit);
_tcscat(line2, tmpT);
LKFormatAltDiff(wp, false, value, unit);
// Should we print also the GR?
if ((ar >= -9999 && ar <= 9999) && (WayPointCalc[wp].GR < MAXEFFICIENCYSHOW)) {
if (ar >= -999 && ar <= 999)
_stprintf(line3, _T("%s "), value);
else
_stprintf(line3, _T("%s "), value);
LKFormatGR(wp, false, value, unit);
_tcscat(line3, value);
} else {
_stprintf(line3, _T("%s ---"), value);
}
VGTextInBox(Surface, n, 3, name, line2, line3, slotCenterX[n], ty, textcolor, bcolor);
break;
default:
#if BUGSTOP
LKASSERT(0);
#endif
return;
}
} // for numSlotX
// Cleanup and return
Surface.SelectObject(oldBrush);
Surface.SelectObject(oldPen);
return;
}
void MapWindow::RenderMapWindowBg(LKSurface& Surface, const RECT& rc) {
if ( (LKSurface::AlphaBlendSupported() && BarOpacity < 100) || mode.AnyPan() ) {
RECT newRect = {0, 0, ScreenSizeX, ScreenSizeY};
MapWindow::ChangeDrawRect(newRect);
} else {
RECT newRect = {0, 0, ScreenSizeX, ScreenSizeY - BottomSize - (ScreenSizeY-MapRect.bottom)-1};
MapWindow::ChangeDrawRect(newRect);
}
if (QUICKDRAW) {
goto _skip_calcs;
}
// Here we calculate arrival altitude, GD etc for map waypoints. Splitting with multicalc will result in delayed
// updating of visible landables, for example. The nearest pages do this separately, with their own sorting.
// Basically we assume -like for nearest- that values will not change that much in the multicalc split time.
// Target and tasks are recalculated in real time in any case. Nearest too.
LKCalculateWaypointReachable(false);
_skip_calcs:
if (PGZoomTrigger) {
if (!mode.Is(Mode::MODE_PANORAMA)) {
mode.Special(Mode::MODE_SPECIAL_PANORAMA, true);
LastZoomTrigger = DrawInfo.Time;
Message::AddMessage(1000, 3, gettext(TEXT("_@M872_"))); // LANDSCAPE ZOOM FOR 20s
LKSound(TEXT("LK_TONEUP.WAV"));
} else {
// previously called, see if time has passed
if (DrawInfo.Time > (LastZoomTrigger + 20.0)) {
// time has passed, lets go back
LastZoomTrigger = 0; // just for safety
mode.Special(Mode::MODE_SPECIAL_PANORAMA, false);
PGZoomTrigger = false;
Message::AddMessage(1500, 3, gettext(TEXT("_@M873_"))); // BACK TO NORMAL ZOOM
LKSound(TEXT("LK_TONEDOWN.WAV"));
}
}
}
//
// "Checkpoint Charlie"
// This is were we process stuff for anything else but main map.
// We let the calculations run also for MapSpace modes.
// But for multimaps, we can also draw some more stuff..
// We are also sent back here from next code, when we detect that
// the MapSpace mode has changed from MAP to something else while we
// were rendering.
//
QuickRedraw:
//
if (DONTDRAWTHEMAP) {
const bool isMultimap = IsMultiMapShared(); // DrawMapSpace can change "MapSpaceMode", get this before.
DrawMapSpace(Surface, rc);
// Is this a "shared map" environment?
if (isMultimap) {
// Shared map, of course not MSN_MAP, since dontdrawthemap was checked
//
if (IsMultimapOverlaysGauges()) {
RenderOverlayGauges(Surface, rc);
}
if (IsMultimapOverlaysText()) {
DrawLook8000(Surface, rc);
}
} else {
// Not in map painting environment
// ex. nearest pages, but also MAPRADAR..
}
//
DrawBottomBar(Surface, rc);
#ifdef DRAWDEBUG
DrawDebug(hdc, rc);
#endif
// no need to do SelectObject as at the bottom of function
return;
}
POINT Orig, Orig_Aircraft;
CalculateOrigin(rc, &Orig);
const ScreenProjection _Proj = CalculateScreenPositions(Orig, rc, &Orig_Aircraft);
// When no terrain is painted, set a background0
// Remember that in this case we have plenty of cpu time to spend for best result
if (!IsMultimapTerrain() || !DerivedDrawInfo.TerrainValid || !RasterTerrain::isTerrainLoaded()) {
// We force LK painting black values on screen depending on the background color in use
// TODO make it an array once settled
// blackscreen would force everything to be painted white, instead
LKTextBlack = BgMapColorTextBlack[BgMapColor];
if (BgMapColor > 6) BlackScreen = true;
else BlackScreen = false;
} else {
LKTextBlack = false;
BlackScreen = false;
}
// Logic of DONTDRAWTHEMAP is the following:
// We are rendering the screen page here. If we are here, we passed Checkpoint Charlie.
// So we were, at charlie, in MSM_MAP: preparing the main map stuff.
// If we detect that MapSpace has CHANGED while we were doing our job here,
// it means that the user has clicked meanwhile. He desires another page, so let's
// reset our intentions and go back to beginning, or nearby..
// We have a new job to do, for another MapSpace, no more MAP.
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
bool terrainpainted = false;
if ((IsMultimapTerrain() && (DerivedDrawInfo.TerrainValid)
&& RasterTerrain::isTerrainLoaded())
) {
// sunelevation is never used, it is still a todo in Terrain
double sunelevation = 40.0;
double sunazimuth = GetAzimuth();
LockTerrainDataGraphics();
if (DONTDRAWTHEMAP) { // 100318
UnlockTerrainDataGraphics();
goto QuickRedraw;
}
if(DrawTerrain(Surface, DrawRect, _Proj, sunazimuth, sunelevation)) {
terrainpainted = true;
}
if (DONTDRAWTHEMAP) {
UnlockTerrainDataGraphics();
goto QuickRedraw;
}
if (!QUICKDRAW) {
// SHADED terrain unreachable, aka glide amoeba. This is not the outlined perimeter!
#ifdef GTL2
if (((FinalGlideTerrain == 2) || (FinalGlideTerrain == 4)) &&
DerivedDrawInfo.TerrainValid) {
#else
if ((FinalGlideTerrain == 2) && DerivedDrawInfo.TerrainValid) {
#endif
DrawTerrainAbove(Surface, DrawRect);
}
}
UnlockTerrainDataGraphics();
}
//
// REMINDER: WE ARE IN MAIN MAP HERE: MSM_MAP ONLY, OR PANNING MODE!
// MAPSPACEMODE CAN STILL CHANGE, DUE TO USER INPUT. BUT WE GOT HERE IN
// EITHER PAN OR MSM_MAP.
//
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
if(!terrainpainted) {
// fill background..
Surface.FillRect(&rc, hInvBackgroundBrush[BgMapColor]);
}
if (IsMultimapTopology()) {
DrawTopology(Surface, DrawRect, _Proj);
} else {
// If no topology wanted, but terrain painted, we paint only water stuff
if (terrainpainted) DrawTopology(Surface, DrawRect, _Proj, true);
}
#if 0
StartupStore(_T("... Experimental1=%.0f\n"), Experimental1);
StartupStore(_T("... Experimental2=%.0f\n"), Experimental2);
Experimental1 = 0.0;
Experimental2 = 0.0;
#endif
// Topology labels are printed first, using OLD wps positions from previous run!
// Reset for topology labels decluttering engine occurs also in another place here!
ResetLabelDeclutter();
if ((Flags_DrawTask || TargetDialogOpen) && ValidTaskPoint(ActiveTaskPoint) && ValidTaskPoint(1)) {
DrawTaskAAT(Surface, DrawRect);
}
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
if (IsMultimapAirspace()) {
DrawAirSpace(Surface, rc, _Proj);
}
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
// In QUICKDRAW dont draw trail, thermals, glide terrain
if (QUICKDRAW) {
goto _skip_stuff;
}
DrawThermalEstimate(Surface, DrawRect, _Proj);
if (OvertargetMode == OVT_THER) DrawThermalEstimateMultitarget(Surface, DrawRect, _Proj);
// draw red cross on glide through terrain marker
if (FinalGlideTerrain && DerivedDrawInfo.TerrainValid) {
DrawGlideThroughTerrain(Surface, DrawRect, _Proj);
}
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
_skip_stuff:
if (IsMultimapAirspace() && AirspaceWarningMapLabels) {
DrawAirspaceLabels(Surface, DrawRect, _Proj, Orig_Aircraft);
if (DONTDRAWTHEMAP) { // 100319
goto QuickRedraw;
}
}
if (IsMultimapWaypoints()) {
DrawWaypointsNew(Surface, DrawRect);
}
if (TrailActive) {
LKDrawLongTrail(Surface, Orig_Aircraft, DrawRect);
// NEED REWRITING
LKDrawTrail(Surface, DrawRect, _Proj);
}
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
if ((Flags_DrawTask || TargetDialogOpen) && ValidTaskPoint(ActiveTaskPoint) && ValidTaskPoint(1)) {
DrawTask(Surface, DrawRect, _Proj, Orig_Aircraft);
}
if (Flags_DrawFAI) {
if (MapWindow::DerivedDrawInfo.Flying) { // FAI optimizer does not depend on tasks, being based on trace
DrawFAIOptimizer(Surface, DrawRect, _Proj, Orig_Aircraft);
} else { // not flying => show FAI sectors for the task
if (ValidTaskPoint(ActiveTaskPoint) && ValidTaskPoint(1)) {
DrawTaskSectors(Surface, DrawRect, _Proj);
}
}
}
// In QUICKDRAW do not paint other useless stuff
if (QUICKDRAW) {
if (extGPSCONNECT) DrawBearing(Surface, DrawRect, _Proj);
goto _skip_2;
}
// ---------------------------------------------------
DrawTeammate(Surface, rc, _Proj);
if (extGPSCONNECT) {
DrawBestCruiseTrack(Surface, Orig_Aircraft);
DrawBearing(Surface, DrawRect, _Proj);
}
// draw wind vector at aircraft
if (NOTANYPAN) {
DrawWindAtAircraft2(Surface, Orig_Aircraft, DrawRect);
} else if (mode.Is(Mode::MODE_TARGET_PAN)) {
DrawWindAtAircraft2(Surface, Orig, rc);
}
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
// Draw traffic and other specifix LK gauges
LKDrawFLARMTraffic(Surface, DrawRect, _Proj, Orig_Aircraft);
// ---------------------------------------------------
_skip_2:
if (NOTANYPAN) {
if (IsMultimapOverlaysGauges()) {
RenderOverlayGauges(Surface, rc);
}
if (TrackBar) {
DrawHeading(Surface, Orig, DrawRect);
if (ISGAAIRCRAFT) {
DrawFuturePos(Surface, Orig, DrawRect);
}
}
if (ISGAAIRCRAFT) {
DrawHSIarc(Surface, Orig, DrawRect);
}
if (IsMultimapOverlaysText()) {
DrawLook8000(Surface, rc);
}
DrawBottomBar(Surface, rc);
}
if (DONTDRAWTHEMAP) {
goto QuickRedraw;
}
// Draw glider or paraglider
if (extGPSCONNECT) {
DrawAircraft(Surface, Orig_Aircraft);
}
#if USETOPOMARKS
// marks on top...
DrawMarks(hdc, rc);
#endif
if (!INPAN) {
DrawMapScale(Surface, rc, zoom.BigZoom()); // unused BigZoom
DrawCompass(Surface, rc, DisplayAngle);
}
#ifdef DRAWDEBUG
DrawDebug(hdc, rc);
#endif
}
void MapWindow::LKDrawVario(LKSurface& Surface, const RECT& rc) {
static PixelRect vrc, mrc, hrc, htrc, hbrc;
static BrushReference greenBrush, darkyellowBrush, orangeBrush, redBrush;
static BrushReference lakeBrush, blueBrush, indigoBrush;
static PenReference borderPen; // Pen for border of vario bar and vario bricks ( white or black)
static BrushReference forgroundBrush; // Brush used for draw middle thick or monochrome brick ( same color of borderPen )
/*
* this array define vario Value for each brick, ( positive value )
* Number of brick for positive value is defined by this array size.
*/
static const double positive_vario_step[] = {0.05, 0.25, 0.50, 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00, 3.50, 4.50, 5.00, 6.00, 7.00};
static const unsigned positive_brick_count = array_size(positive_vario_step);
static BrushReference positiveBrush[positive_brick_count];
static PixelRect positiveBricks[positive_brick_count];
/*
* this array define vario Value for each brick, ( negative value )
* Number of brick for negative value is defined by this array size.
*/
static const double negative_vario_step[] = {-0.05, -0.25, -0.50, -0.75, -1.00, -1.25, -1.50, -1.75, -2.00, -2.50, -3.00, -3.50, -4.50, -5.00, -6.00, -7.00};
static const unsigned negative_brick_count = array_size(negative_vario_step);
static BrushReference negativeBrush[negative_brick_count];
static PixelRect negativeBricks[negative_brick_count];
static short startInitCounter = 0;
static bool dogaugeinit = true;
static double max_positiveGload;
static double max_negativeGload;
if (DoInit[MDI_DRAWVARIO]) {
const int boxthick = IBLSCALE(BOXTHICK);
const int hpixelseparate = (LKVarioBar > vBarVarioGR) ? 0 : IBLSCALE(PIXELSEPARATE);
const int vpixelseparate = IBLSCALE(PIXELSEPARATE);
const int variowidth = LKVarioSize;
startInitCounter = 0;
dogaugeinit = true;
// initial fullscale G loads for 2D driving.
// These values are then rescaled (only increased) automatically.
max_positiveGload = 0.1;
max_negativeGload = -0.1;
borderPen = (BgMapColor > POSCOLOR) ? LKPen_White_N0 : LKPen_Black_N0;
forgroundBrush = (BgMapColor > POSCOLOR) ? LKBrush_White : LKBrush_Black;
greenBrush = LKBrush_Green;
darkyellowBrush = LKBrush_DarkYellow2;
orangeBrush = LKBrush_Orange;
redBrush = LKBrush_Red;
lakeBrush = LKBrush_Lake;
blueBrush = LKBrush_Blue;
indigoBrush = LKBrush_Indigo;
const short lkvariobar = (LKVarioBar > vBarVarioGR) ? LKVarioBar - vBarVarioGR : LKVarioBar;
switch (lkvariobar) {
default:
LKASSERT(false); // wrong config value or disabled, in any case, it's BUG
// no break; for avoid to have unitialized Brush array.
case vBarVarioColor:
// set default background in case of missing values
std::fill(std::begin(positiveBrush), std::end(positiveBrush), forgroundBrush);
std::fill(std::begin(negativeBrush), std::end(negativeBrush), forgroundBrush);
static_assert(array_size(positiveBrush)> 15, "\"positiveBrush\" size must be greater than 15, check \"positive_vario_step\" size");
positiveBrush[15] = redBrush;
positiveBrush[14] = redBrush;
positiveBrush[13] = redBrush;
positiveBrush[12] = redBrush;
positiveBrush[11] = orangeBrush;
positiveBrush[10] = orangeBrush;
positiveBrush[9] = orangeBrush;
positiveBrush[8] = orangeBrush;
positiveBrush[7] = darkyellowBrush;
positiveBrush[6] = darkyellowBrush;
positiveBrush[5] = darkyellowBrush;
positiveBrush[4] = darkyellowBrush;
positiveBrush[3] = greenBrush;
positiveBrush[2] = greenBrush;
positiveBrush[1] = greenBrush;
positiveBrush[0] = greenBrush;
negativeBrush[0] = lakeBrush;
negativeBrush[1] = lakeBrush;
negativeBrush[2] = lakeBrush;
negativeBrush[3] = lakeBrush;
negativeBrush[4] = blueBrush;
negativeBrush[5] = blueBrush;
negativeBrush[6] = blueBrush;
negativeBrush[7] = blueBrush;
negativeBrush[8] = indigoBrush;
negativeBrush[9] = indigoBrush;
negativeBrush[10] = indigoBrush;
negativeBrush[11] = indigoBrush;
negativeBrush[12] = forgroundBrush;
negativeBrush[13] = forgroundBrush;
negativeBrush[14] = forgroundBrush;
negativeBrush[15] = forgroundBrush;
static_assert(array_size(negativeBrush)> 15, "\"negativeBrush\" size must be greater than 15, check \"negative_vario_step\" size");
break;
case vBarVarioMono:
std::fill(std::begin(positiveBrush), std::end(positiveBrush), forgroundBrush);
std::fill(std::begin(negativeBrush), std::end(negativeBrush), forgroundBrush);
break;
case vBarVarioRB:
std::fill(std::begin(positiveBrush), std::end(positiveBrush), redBrush);
std::fill(std::begin(negativeBrush), std::end(negativeBrush), blueBrush);
break;
case vBarVarioGR:
std::fill(std::begin(positiveBrush), std::end(positiveBrush), greenBrush);
std::fill(std::begin(negativeBrush), std::end(negativeBrush), redBrush);
break;
}
// vario paint area
vrc.left = rc.left;
vrc.top = rc.top;
vrc.right = vrc.left + variowidth;
vrc.bottom = rc.bottom - BottomSize;
// meter area
mrc.left = vrc.left + hpixelseparate;
mrc.top = vrc.top + vpixelseparate;
mrc.right = vrc.right - hpixelseparate;
mrc.bottom = vrc.bottom - vpixelseparate;
// half vario separator for positive and negative values
const double vmiddle_height = NIBLSCALE(2) - ((mrc.bottom - mrc.top) % 2);
const double vmiddle = ((mrc.bottom - mrc.top) / 2.0) + mrc.top;
hrc.top = vrc.top + vmiddle - (vmiddle_height / 2);
hrc.bottom = vrc.top + vmiddle + (vmiddle_height / 2);
hrc.left = vrc.left;
hrc.right = vrc.right;
// half top meter area
htrc.left = mrc.left;
htrc.right = mrc.right;
htrc.bottom = hrc.top - vpixelseparate;
htrc.top = mrc.top + vpixelseparate;
// half bottom meter area
hbrc.left = mrc.left;
hbrc.right = mrc.right;
hbrc.top = hrc.bottom + vpixelseparate;
hbrc.bottom = mrc.bottom - vpixelseparate;
// pixel height of each positive brick
const int positive_brick_size = (htrc.bottom - htrc.top - (boxthick * (positive_brick_count - 1))) / positive_brick_count;
const int positive_brick_advance = positive_brick_size + boxthick;
// Pre-calculate brick positions for half top
for (unsigned i = 0; i < positive_brick_count; ++i) {
RECT& brc = positiveBricks[i];
brc.left = htrc.left;
brc.right = htrc.right - NIBLSCALE(4);
brc.bottom = htrc.bottom - (i * positive_brick_advance);
brc.top = brc.bottom - positive_brick_size;
}
// update last box for hide rounding artefact
positiveBricks[positive_brick_count - 1].top = htrc.top;
// pixel height of each negative brick
const int negative_brick_size = (hbrc.bottom - hbrc.top - (boxthick * (negative_brick_count - 1))) / negative_brick_count;
const int negative_brick_advance = negative_brick_size + boxthick;
// Pre-calculate brick positions for half bottom
for (unsigned i = 0; i < negative_brick_count; ++i) {
RECT& brc = negativeBricks[i];
brc.left = hbrc.left;
brc.right = hbrc.right - NIBLSCALE(4);
brc.top = hbrc.top + (i * negative_brick_advance);
brc.bottom = brc.top + negative_brick_size;
}
// update last box for hide rounding artefact
negativeBricks[negative_brick_count - 1].bottom = hbrc.bottom;
DoInit[MDI_DRAWVARIO] = false;
} // END of INIT
double vario_value = 0; // can be vario, vario netto or STF offset, depending of config and map mode
double mc_value = 0; // current MacCready value, used only for Vario or VarioNetto.
if (ISCAR && DrawInfo.Speed > 0) {
// Heading is setting Gload, but Heading is not calculated while steady!
// For this case, we force vario_value to 0.
//
// Since we use currently a scale 0-6 for vario, we can use 0-2 for cars.
// This accounts for an acceleration topscale of 0-100kmh in 13.9 seconds.
// Not a big acceleration, but very good for normal car usage.
// We make this concept dynamical, and different for positive and negative accelerations.
// Because negative accelerations are much higher, on a car. Of course!
//
if (DerivedDrawInfo.Gload > 0) {
if (DerivedDrawInfo.Gload > max_positiveGload) {
max_positiveGload = DerivedDrawInfo.Gload;
StartupStore(_T("..... NEW MAXPOSITIVE G=%f\n"), max_positiveGload);
}
LKASSERT(max_positiveGload > 0);
vario_value = (DerivedDrawInfo.Gload / max_positiveGload)*6;
//StartupStore(_T("Speed=%f G=%f max=%f val=%f\n"),DrawInfo.Speed, DerivedDrawInfo.Gload, max_positiveGload,vario_value);
}
if (DerivedDrawInfo.Gload < 0) {
if (DerivedDrawInfo.Gload < max_negativeGload) {
max_negativeGload = DerivedDrawInfo.Gload;
StartupStore(_T("..... NEW MAXNEGATIVE G=%f\n"), max_negativeGload);
}
LKASSERT(max_negativeGload < 0);
vario_value = (DerivedDrawInfo.Gload / max_negativeGload)*-6;
//StartupStore(_T("Speed=%f G=%f max=%f val=%f\n"),DrawInfo.Speed, DerivedDrawInfo.Gload, max_negativeGload,vario_value);
}
} else if (MapWindow::mode.Is(MapWindow::Mode::MODE_CIRCLING) || LKVarioVal == vValVarioVario) {
if (DrawInfo.VarioAvailable) {
// UHM. I think we are not painting values correctly for knots &c.
//vario_value = LIFTMODIFY*DrawInfo.Vario;
vario_value = DrawInfo.Vario;
} else {
vario_value = DerivedDrawInfo.Vario;
}
mc_value = MACCREADY;
} else {
switch (LKVarioVal) {
default:
case vValVarioNetto:
vario_value = DerivedDrawInfo.NettoVario;
// simple hack for avoid to used polar curve : glider_sink_rate = Vario - NettoVario;
mc_value = MACCREADY + (DerivedDrawInfo.Vario - DerivedDrawInfo.NettoVario);
break;
case vValVarioSoll:
double ias;
if (DrawInfo.AirspeedAvailable && DrawInfo.VarioAvailable)
ias = DrawInfo.IndicatedAirspeed;
else
ias = DerivedDrawInfo.IndicatedAirspeedEstimated;
// m/s 0-nnn autolimit to 20m/s full scale (72kmh diff)
vario_value = clamp(DerivedDrawInfo.VOpt - ias, -20., 20.);
vario_value /= 3.3333; // 0-20 -> 0-6
vario_value *= -1; // if up, push down
break;
}
}
// Backup selected Brush & Pen
LKSurface::OldPen oldPen = Surface.SelectObject(LK_NULL_PEN);
LKSurface::OldBrush oldBrush = Surface.SelectObject(LKBrush_Hollow);
// draw Vario box ( only if not transparent )
if (LKVarioBar <= vBarVarioGR) {
Surface.SelectObject(borderPen);
Surface.SelectObject(hInvBackgroundBrush[BgMapColor]);
Surface.Rectangle(vrc.left, vrc.top, vrc.right, vrc.bottom);
}
// draw middle separator for 0 scale indicator
Surface.FillRect(&hrc, forgroundBrush);
Surface.SelectObject(borderPen);
if (dogaugeinit) {
// this is causing problems on emulators and condor and most of the times when the gps has no valid date
// so we don't use seconds, but loop counter
if (startInitCounter++ > 2) {
dogaugeinit = false;
}
// Demo show all bricks
for (unsigned i = 0; i < positive_brick_count; ++i) {
const RECT& brc = positiveBricks[i];
Surface.SelectObject(positiveBrush[i]);
Surface.Rectangle(brc.left, brc.top, brc.right, brc.bottom);
}
for (unsigned i = 0; i < negative_brick_count; ++i) {
const RECT& brc = negativeBricks[i];
Surface.SelectObject(negativeBrush[i]);
Surface.Rectangle(brc.left, brc.top, brc.right, brc.bottom);
}
} else {
// Draw Real Vario Data
// Draw Positive Brick
for (unsigned i = 0; i < positive_brick_count && vario_value >= positive_vario_step[i]; ++i) {
const RECT& brc = positiveBricks[i];
Surface.SelectObject(positiveBrush[i]);
Surface.Rectangle(brc.left, brc.top, brc.right, brc.bottom);
}
// Draw Negative Brick
for (unsigned i = 0; i < negative_brick_count && vario_value <= negative_vario_step[i]; ++i) {
const RECT& brc = negativeBricks[i];
Surface.SelectObject(negativeBrush[i]);
Surface.Rectangle(brc.left, brc.top, brc.right, brc.bottom);
}
// Draw MacCready Indicator
const auto step_iterator = std::upper_bound(std::begin(positive_vario_step), std::end(positive_vario_step), mc_value);
size_t mc_brick_idx = std::distance(std::begin(positive_vario_step), step_iterator);
if (mc_brick_idx > 1) {
const PixelRect& brc_next = positiveBricks[mc_brick_idx];
const PixelRect& brc_Prev = positiveBricks[mc_brick_idx-1];
const PixelSize IconSize = hMcVario.GetSize();
const PixelSize DrawSize = {
vrc.GetSize().cx,
IconSize.cy * vrc.GetSize().cx / IconSize.cx
};
const RasterPoint DrawPos = {
vrc.left,
brc_Prev.top + ((brc_next.bottom - brc_Prev.top) / 2) + (IconSize.cy / 2)
};
hMcVario.Draw(Surface, DrawPos.x, DrawPos.y, DrawSize.cx, DrawSize.cy);
}
}
// cleanup
Surface.SelectObject(oldPen);
Surface.SelectObject(oldBrush);
}
void MapWindow::DrawAspNearest(LKSurface& Surface, const RECT& rc) {
SIZE ASPTextSize, DSTextSize, BETextSize, TYTextSize, ACTextSize, HLTextSize, MITextSize;
SIZE phdrTextSize;
TCHAR Buffer[LKSIZEBUFFERLARGE];
static RECT s_sortBox[6];
static TCHAR Buffer1[MAXNEARAIRSPACES][MAXAIRSPACENUMPAGES][30], Buffer2[MAXNEARAIRSPACES][MAXAIRSPACENUMPAGES][12];
static TCHAR Buffer3[MAXNEARAIRSPACES][MAXAIRSPACENUMPAGES][12];
static TCHAR Buffer4[MAXNEARAIRSPACES][MAXAIRSPACENUMPAGES][12], Buffer5[MAXNEARAIRSPACES][MAXAIRSPACENUMPAGES][12];
static short s_maxnlname;
static TCHAR s_trailspace[3];
short i, j, k, iRaw, wlen, rli=0, curpage, drawn_items_onpage;
double value;
LKColor rcolor;
// column0 starts after writing 1:2 (ModeIndex:CURTYPE+1) with a different font..
static short Column0;
static short Column1, Column2, Column3, Column4, Column5;
static POINT p1, p2;
static short s_rawspace;
static unsigned short lincr;
// Printable area for live nearest values
static short left,right,bottom;
// one for each mapspace, no matter if 0 and 1 are unused
// we lock to current mapspace for this drawing
short curmapspace=MapSpaceMode;
static int AspNumraws=0;
static bool usetwolines=0;
// Vertical and horizontal spaces
#define INTERRAW 1
#define HEADRAW NIBLSCALE(6)
BrushReference sortbrush;
RECT invsel;
if (INVERTCOLORS) {
sortbrush=LKBrush_LightGreen;
} else {
sortbrush=LKBrush_DarkGreen;
}
if (DoInit[MDI_DRAWASPNEAREST]) {
usetwolines=UseTwoLines;
// Set screen borders to avoid writing on extreme pixels
if ( !ScreenLandscape ) {
// Portrait mode can work on two rows
left=rc.left+NIBLSCALE(1);
right=rc.right-NIBLSCALE(1);
bottom=rc.bottom-BottomSize-NIBLSCALE(2);
s_maxnlname=7;
_stprintf(Buffer,TEXT("AKSJSMMMM"));
} else {
left=rc.left+NIBLSCALE(5);
right=rc.right-NIBLSCALE(5);
bottom=rc.bottom-BottomSize;
s_maxnlname=15;
_stprintf(Buffer,TEXT("ABCDEF GHIJK-LM"));
// now resize for tuning on resolutions
if (ScreenSize == ss320x240) s_maxnlname=9;
if (ScreenSize == ss400x240) s_maxnlname=10;
}
Buffer[s_maxnlname]='\0';
/// WPT is now AIRSPACE name
Surface.SelectObject(LK8InfoBigFont); // Text font for Nearest was LK8Title
Surface.GetTextSize(Buffer, _tcslen(Buffer), &ASPTextSize);
// DST is always distance
_stprintf(Buffer,TEXT("000.0"));
Surface.GetTextSize(Buffer, _tcslen(Buffer), &DSTextSize);
// Bearing
_stprintf(Buffer,TEXT("<<123"));
Surface.GetTextSize(Buffer, _tcslen(Buffer), &BETextSize);
// TYPE, 4 letters printed
#define LKASP_TYPE_LEN 4
_stprintf(Buffer,TEXT("CTRA"));
Surface.GetTextSize(Buffer, _tcslen(Buffer), &TYTextSize);
// Flags can be SFE, three chars
_stprintf(Buffer,TEXT("SFE"));
Surface.GetTextSize(Buffer, _tcslen(Buffer), &ACTextSize);
Surface.SelectObject(LK8InfoNormalFont);
_stprintf(Buffer,TEXT("MMMM"));
Surface.GetTextSize(Buffer, _tcslen(Buffer), &HLTextSize);
Surface.SelectObject(LK8PanelMediumFont);
_stprintf(Buffer,TEXT("1.1"));
Surface.GetTextSize(Buffer, _tcslen(Buffer), &MITextSize);
short afterwpname=left+ASPTextSize.cx+NIBLSCALE(5);
short intercolumn=(right-afterwpname- DSTextSize.cx-BETextSize.cx-TYTextSize.cx-ACTextSize.cx)/3;
// Col0 is where ASP 1/3 can be written, after ModeIndex:Curtype
Column0=MITextSize.cx+LEFTLIMITER+NIBLSCALE(5);
Column1=left; // WP align left
if (ScreenLandscape || !usetwolines) {
Column2=afterwpname+TYTextSize.cx; // TY align right
Column3=Column2+intercolumn+DSTextSize.cx; // DS align right
Column4=Column3+intercolumn+BETextSize.cx; // BE align right
Column5=Column4+intercolumn+ACTextSize.cx; // AC align right
} else {
Surface.SelectObject(LK8PanelMediumFont);
Surface.GetTextSize(_T("2.4_ASP_3/3_"), 12, &phdrTextSize);
int s=(rc.right - phdrTextSize.cx)/4;
Column5= right - NIBLSCALE(2);
Column4= Column5 - s;
Column3= Column4 - s;
Column2= Column3 - s;
}
if ( !ScreenLandscape ) {
if (usetwolines) {
lincr=2;
TopSize=rc.top+HEADRAW*2+ASPTextSize.cy;
} else {
lincr=1;
TopSize=rc.top+HEADRAW*2+HLTextSize.cy;
}
p1.x=0; p1.y=TopSize; p2.x=rc.right; p2.y=p1.y;
TopSize+=HEADRAW;
AspNumraws=(bottom - TopSize) / (ASPTextSize.cy+(INTERRAW*2));
if (AspNumraws>MAXNEARAIRSPACES) AspNumraws=MAXNEARAIRSPACES;
s_rawspace=(ASPTextSize.cy+INTERRAW);
Column5=rc.right-NIBLSCALE(1)-1;
_tcscpy(s_trailspace,_T(""));
} else {
lincr=1;
TopSize=rc.top+HEADRAW*2+HLTextSize.cy;
p1.x=0; p1.y=TopSize; p2.x=rc.right; p2.y=p1.y;
TopSize+=HEADRAW/2;
AspNumraws=(bottom - TopSize) / (ASPTextSize.cy+INTERRAW);
if (AspNumraws>MAXNEARAIRSPACES) AspNumraws=MAXNEARAIRSPACES;
s_rawspace=(ASPTextSize.cy+INTERRAW);
_tcscpy(s_trailspace,_T(" "));
}
#define INTERBOX intercolumn/2
s_sortBox[0].left=Column0;
if (!ScreenLandscape && usetwolines) {
s_sortBox[0].right=phdrTextSize.cx;
} else {
if ( !ScreenLandscape ) s_sortBox[0].right= left+ASPTextSize.cx-NIBLSCALE(2);
else s_sortBox[0].right=left+ASPTextSize.cx-NIBLSCALE(10);
}
s_sortBox[0].top=2;
s_sortBox[0].bottom=p1.y;
SortBoxX[MSM_AIRSPACES][0]=s_sortBox[0].right;
if (!ScreenLandscape && usetwolines) {
s_sortBox[1].left=s_sortBox[0].right;
} else {
if ( !ScreenLandscape ) s_sortBox[1].left=Column1+afterwpname-INTERBOX;
else s_sortBox[1].left=Column1+afterwpname-INTERBOX-NIBLSCALE(2);
}
if (!ScreenLandscape && usetwolines) s_sortBox[1].right=Column2+NIBLSCALE(2);
else s_sortBox[1].right=Column2+INTERBOX;
s_sortBox[1].top=2;
s_sortBox[1].bottom=p1.y;
SortBoxX[MSM_AIRSPACES][1]=s_sortBox[1].right;
if (!ScreenLandscape && usetwolines) {
s_sortBox[2].left=Column2+NIBLSCALE(2);
s_sortBox[2].right=Column3+NIBLSCALE(2);
} else {
s_sortBox[2].left=Column2+INTERBOX;
s_sortBox[2].right=Column3+INTERBOX;
}
s_sortBox[2].top=2;
s_sortBox[2].bottom=p1.y;
SortBoxX[MSM_AIRSPACES][2]=s_sortBox[2].right;
if (!ScreenLandscape && usetwolines) {
s_sortBox[3].left=Column3+NIBLSCALE(2);
s_sortBox[3].right=Column4+NIBLSCALE(2);
} else {
s_sortBox[3].left=Column3+INTERBOX;
s_sortBox[3].right=Column4+INTERBOX;
}
s_sortBox[3].top=2;
s_sortBox[3].bottom=p1.y;
SortBoxX[MSM_AIRSPACES][3]=s_sortBox[3].right;
if (!ScreenLandscape && usetwolines) {
s_sortBox[4].left=Column4+NIBLSCALE(2);
s_sortBox[4].right=rc.right-1;
} else {
s_sortBox[4].left=Column4+INTERBOX;
s_sortBox[4].right=rc.right-1;
}
s_sortBox[4].top=2;
s_sortBox[4].bottom=p1.y;
SortBoxX[MSM_AIRSPACES][4]=s_sortBox[4].right;
SortBoxY[MSM_AIRSPACES]=p1.y;
AspNumpages=roundupdivision(MAXNEARAIRSPACES*lincr, AspNumraws);
if (AspNumpages>MAXAIRSPACENUMPAGES) AspNumpages=MAXAIRSPACENUMPAGES;
else if (AspNumpages<1) AspNumpages=1;
SelectedRaw[MSM_AIRSPACES]=0;
SelectedPage[MSM_AIRSPACES]=0;
DoInit[MDI_DRAWASPNEAREST]=false;
return;
} // doinit
bool ndr;
ndr=DoAirspaces(&DrawInfo, &DerivedDrawInfo);
AspNumpages=roundupdivision(LKNumAirspaces*lincr, AspNumraws);
if (AspNumpages>MAXAIRSPACENUMPAGES) AspNumpages=MAXAIRSPACENUMPAGES;
else if (AspNumpages<1) AspNumpages=1;
curpage=SelectedPage[curmapspace];
if (curpage<0||curpage>=MAXAIRSPACENUMPAGES) { // TODO also >Numpages
SelectedPage[curmapspace]=0;
LKevent=LKEVENT_NONE;
return;
}
switch (LKevent) {
case LKEVENT_NONE:
break;
case LKEVENT_ENTER:
LKevent=LKEVENT_NONE;
i=LKSortedAirspaces[SelectedRaw[curmapspace] + (curpage*AspNumraws/lincr)];
if ( ValidAirspace(i)) {
CCriticalSection::CGuard guard(CAirspaceManager::Instance().MutexRef());
CAirspaceManager::Instance().PopupAirspaceDetail(LKAirspaces[i].Pointer);
}
LKevent=LKEVENT_NONE;
return;
break;
case LKEVENT_DOWN:
if (++SelectedRaw[curmapspace] >=AspNumraws) SelectedRaw[curmapspace]=0;
break;
case LKEVENT_UP:
if (--SelectedRaw[curmapspace] <0) SelectedRaw[curmapspace]=AspNumraws-1;
break;
case LKEVENT_PAGEUP:
LKevent=LKEVENT_NONE;
break;
case LKEVENT_PAGEDOWN:
LKevent=LKEVENT_NONE;
break;
case LKEVENT_NEWRUN:
for (i=0; i<MAXNEARAIRSPACES; i++) {
for (k=0; k<MAXAIRSPACENUMPAGES; k++) {
_stprintf(Buffer1[i][k], _T("----------------------------")); // max 30
Buffer1[i][k][s_maxnlname+7]='\0'; // some more dashes
_stprintf(Buffer2[i][k],_T("----"));
_stprintf(Buffer3[i][k],_T("----"));
_stprintf(Buffer4[i][k],_T("----"));
_stprintf(Buffer5[i][k],_T(" "));
}
}
break;
case LKEVENT_NEWPAGE:
break;
default:
LKevent=LKEVENT_NONE;
break;
}
if (INVERTCOLORS)
Surface.DrawLine(PEN_SOLID, NIBLSCALE(1), p1, p2, RGB_GREEN, rc);
else
Surface.DrawLine(PEN_SOLID, NIBLSCALE(1), p1, p2, RGB_DARKGREEN, rc);
Surface.SelectObject(LK8InfoNormalFont); // Heading line
short cursortbox=SortedMode[curmapspace];
if ( !ScreenLandscape ) { // portrait mode
Surface.FillRect(&s_sortBox[cursortbox], sortbrush);
_stprintf(Buffer,TEXT("%d.%d"),ModeIndex,CURTYPE+1);
Surface.SelectObject(LK8PanelMediumFont);
LKWriteText(Surface, Buffer, LEFTLIMITER, rc.top+TOPLIMITER , 0, WTMODE_NORMAL, WTALIGN_LEFT, RGB_LIGHTGREEN, false);
Surface.SelectObject(LK8InfoNormalFont);
_stprintf(Buffer,TEXT("%s %d/%d"), gettext(TEXT("_@M1642_")), curpage+1, AspNumpages); // ASP
if (cursortbox == 0)
LKWriteText(Surface, Buffer, Column0, HEADRAW-NIBLSCALE(1) , 0, WTMODE_NORMAL, WTALIGN_LEFT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column0, HEADRAW-NIBLSCALE(1) , 0, WTMODE_NORMAL, WTALIGN_LEFT, RGB_LIGHTGREEN, false);
_tcscpy(Buffer,gettext(TEXT("_@M752_"))); // Type
if (cursortbox==1)
LKWriteText(Surface, Buffer, Column2, HEADRAW , 0, WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column2, HEADRAW , 0, WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
_tcscpy(Buffer,gettext(TEXT("_@M1300_"))); // Dist
if (cursortbox==2)
LKWriteText(Surface, Buffer, Column3, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column3, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
_tcscpy(Buffer,gettext(TEXT("_@M1301_"))); // Dir
if (cursortbox==3)
LKWriteText(Surface, Buffer, Column4, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column4, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
// Active mode
_tcscpy(Buffer,TEXT("*"));
if (cursortbox==4)
LKWriteText(Surface, Buffer, Column5, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column5, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
} else {
Surface.FillRect(&s_sortBox[cursortbox], sortbrush);
_stprintf(Buffer,TEXT("%d.%d"),ModeIndex,CURTYPE+1);
Surface.SelectObject(LK8PanelMediumFont);
LKWriteText(Surface, Buffer, LEFTLIMITER, rc.top+TOPLIMITER , 0, WTMODE_NORMAL, WTALIGN_LEFT, RGB_LIGHTGREEN, false);
Surface.SelectObject(LK8InfoNormalFont);
_stprintf(Buffer,TEXT("%s %d/%d"), gettext(TEXT("_@M1642_")), curpage+1, AspNumpages); // ASP
if (cursortbox==0)
LKWriteText(Surface, Buffer, Column0, HEADRAW-NIBLSCALE(1) , 0,WTMODE_NORMAL, WTALIGN_LEFT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column0, HEADRAW-NIBLSCALE(1) , 0,WTMODE_NORMAL, WTALIGN_LEFT, RGB_LIGHTGREEN, false);
_tcscpy(Buffer,gettext(TEXT("_@M752_"))); // Type
if (cursortbox==1)
LKWriteText(Surface, Buffer, Column2, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column2, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
_tcscpy(Buffer,gettext(TEXT("_@M1300_"))); // Dist
if (cursortbox==2)
LKWriteText(Surface, Buffer, Column3, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column3, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
_tcscpy(Buffer,gettext(TEXT("_@M1301_"))); // dir
if (cursortbox==3)
LKWriteText(Surface, Buffer, Column4, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column4, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
_stprintf(Buffer,TEXT("*"));
if (cursortbox==4)
LKWriteText(Surface, Buffer, Column5, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_BLACK, false);
else
LKWriteText(Surface, Buffer, Column5, HEADRAW , 0,WTMODE_NORMAL, WTALIGN_RIGHT, RGB_WHITE, false);
} // landscape mode
Surface.SelectObject(LK8InfoBigFont); // Text font for Nearest
int *psortedindex;
psortedindex=LKSortedAirspaces;
for (i=0, j=0, drawn_items_onpage=0; i<AspNumraws; j++, i+=lincr) {
iRaw=TopSize+(s_rawspace*i);
short curraw=(curpage*AspNumraws);
if (!ScreenLandscape && usetwolines) {
curraw/=2;
curraw+=j;
} else {
curraw+=i;
}
if (curraw>=MAXNEARAIRSPACES) break;
rli=*(psortedindex+curraw);
if (!ndr) {
goto KeepOldValues;
}
if ( ValidAirspace(rli) ) {
//
// AIRSPACE NAME
//
wlen=_tcslen(LKAirspaces[rli].Name);
if (!ScreenLandscape && usetwolines) {
LK_tcsncpy(Buffer, LKAirspaces[rli].Name, 15);
} else {
if (wlen>s_maxnlname) {
LK_tcsncpy(Buffer, LKAirspaces[rli].Name, s_maxnlname);
} else {
LK_tcsncpy(Buffer, LKAirspaces[rli].Name, wlen);
}
}
CharUpper(Buffer);
_tcscpy(Buffer1[i][curpage],Buffer);
//
// AIRSPACE TYPE
//
wlen=_tcslen(LKAirspaces[rli].Type);
if (wlen>LKASP_TYPE_LEN) {
LK_tcsncpy(Buffer, LKAirspaces[rli].Type, LKASP_TYPE_LEN);
}
else {
LK_tcsncpy(Buffer, LKAirspaces[rli].Type, wlen);
}
CharUpper(Buffer);
_tcscpy(Buffer2[i][curpage],Buffer);
//
// AIRSPACE DISTANCE
//
switch(LKAirspaces[rli].WarningLevel) {
case awYellow:
value=LKAirspaces[rli].Distance*DISTANCEMODIFY;
if (!ScreenLandscape && usetwolines)
_stprintf(Buffer3[i][curpage],TEXT("%0.1lf%s!"),value,Units::GetDistanceName());
else
_stprintf(Buffer3[i][curpage],TEXT("%0.1lf!"),value);
break;
case awRed:
_stprintf(Buffer3[i][curpage],TEXT("IN"));
break;
default:
value=LKAirspaces[rli].Distance*DISTANCEMODIFY;
if (!ScreenLandscape && usetwolines)
_stprintf(Buffer3[i][curpage],TEXT("%0.1lf%s"),value,Units::GetDistanceName());
else
_stprintf(Buffer3[i][curpage],TEXT("%0.1lf"),value);
break;
}
//
// AIRSPACE BEARING DIFFERENCE, OR BEARING IF CIRCLING
//
if (!MapWindow::mode.Is(MapWindow::Mode::MODE_CIRCLING)) {
value = LKAirspaces[rli].Bearing - DrawInfo.TrackBearing;
if (value < -180.0)
value += 360.0;
else
if (value > 180.0)
value -= 360.0;
if (value > 1)
_stprintf(Buffer4[i][curpage], TEXT("%2.0f%s%s"), value, gettext(_T("_@M2179_")), gettext(_T("_@M2183_")));
else if (value < -1)
_stprintf(Buffer4[i][curpage], TEXT("%s%2.0f%s"), gettext(_T("_@M2182_")), -value, gettext(_T("_@M2179_")));
else
_stprintf(Buffer4[i][curpage], TEXT("%s%s"), gettext(_T("_@M2182_")), gettext(_T("_@M2183_")));
} else
_stprintf(Buffer4[i][curpage], TEXT("%2.0f%s"), LKAirspaces[rli].Bearing, gettext(_T("_@M2179_")));
//
// AIRSPACE FLAGS
//
TCHAR aspflags[5];
_stprintf(aspflags,_T("%s%s%s%s"),
LKAirspaces[rli].Selected ? _T("S") : _T(""),
LKAirspaces[rli].Flyzone ? _T("F") : _T(" "),
LKAirspaces[rli].Enabled ? _T("E") : _T("D"), s_trailspace);
if (!ScreenLandscape && usetwolines) _stprintf(Buffer5[i][curpage], TEXT("*%s"), aspflags);
else _stprintf(Buffer5[i][curpage], TEXT("%s"), aspflags);
} else {
_stprintf(Buffer1[i][curpage], _T("----------------------------")); // max 30
Buffer1[i][curpage][s_maxnlname+7]='\0'; // some more dashes
_stprintf(Buffer2[i][curpage],_T("----"));
_stprintf(Buffer3[i][curpage],_T("----"));
_stprintf(Buffer4[i][curpage],_T("----"));
_stprintf(Buffer5[i][curpage],_T(" "));
}
KeepOldValues:
if ( ValidAirspace(rli) ) {
drawn_items_onpage++;
switch(LKAirspaces[rli].WarningLevel) {
case awYellow:
rcolor=RGB_LIGHTYELLOW;
Surface.SelectObject(LK8InfoBigItalicFont);
break;
case awRed:
rcolor=RGB_LIGHTRED;
Surface.SelectObject(LK8InfoBigItalicFont);
break;
case awNone:
default:
rcolor=RGB_WHITE;
Surface.SelectObject(LK8InfoBigFont);
break;
}
} else {
rcolor=RGB_GREY;
}
if (ScreenLandscape || !usetwolines) {
LKWriteText(Surface, Buffer1[i][curpage], Column1, iRaw , 0, WTMODE_NORMAL, WTALIGN_LEFT, rcolor, false);
LKWriteText(Surface, Buffer2[i][curpage], Column2, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
LKWriteText(Surface, Buffer3[i][curpage], Column3, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
LKWriteText(Surface, Buffer4[i][curpage], Column4, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
LKWriteText(Surface, Buffer5[i][curpage], Column5, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
} else {
LKWriteText(Surface, Buffer1[i][curpage], Column1, iRaw , 0, WTMODE_NORMAL, WTALIGN_LEFT, rcolor, false);
LKWriteText(Surface, Buffer2[i][curpage], Column5, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
iRaw+=s_rawspace;
unsigned int iCol=ScreenSizeX/3;
LKWriteText(Surface, Buffer3[i][curpage], iCol, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
LKWriteText(Surface, Buffer4[i][curpage], iCol*2, iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
LKWriteText(Surface, Buffer5[i][curpage], right-IBLSCALE(2), iRaw , 0, WTMODE_NORMAL, WTALIGN_RIGHT, rcolor, false);
}
}
if (LKevent==LKEVENT_NEWRUN || LKevent==LKEVENT_NEWPAGE ) {
LKevent=LKEVENT_NONE;
return;
}
if (drawn_items_onpage>0) {
if (SelectedRaw[curmapspace] <0 || SelectedRaw[curmapspace]>(AspNumraws-1)) {
return;
}
if (SelectedRaw[curmapspace] >= drawn_items_onpage) {
if (LKevent==LKEVENT_DOWN) SelectedRaw[curmapspace]=0;
else
if (LKevent==LKEVENT_UP) SelectedRaw[curmapspace]=drawn_items_onpage-1;
else {
// DoStatusMessage(_T("Cant find valid raw")); not needed anymore
SelectedRaw[curmapspace]=0;
}
}
invsel.left=left;
invsel.right=right;
if (!ScreenLandscape && usetwolines) invsel.top=TopSize+(s_rawspace*SelectedRaw[curmapspace]*lincr);
else invsel.top=TopSize+(s_rawspace*SelectedRaw[curmapspace])+NIBLSCALE(2);
invsel.bottom=TopSize+(s_rawspace*(SelectedRaw[curmapspace]*lincr+1))-NIBLSCALE(1);
if (!ScreenLandscape && usetwolines) invsel.bottom+=s_rawspace;
Surface.InvertRect(invsel);
}
LKevent=LKEVENT_NONE;
return;
}
//
// Called by LKDrawLook8000, this is what happens when we change mapspace mode, advancing through types.
// We paint infopages, nearest, tri, etc.etc.
// Normally there is plenty of cpu available because the map is not even calculated.
// This is why we bring to the Draw thread, in the nearest pages case, also calculations.
//
void MapWindow::DrawMapSpace(LKSurface& Surface, const RECT& rc) {
BrushReference hB;
TextInBoxMode_t TextDisplayMode = {0};
TCHAR Buffer[LKSIZEBUFFERLARGE*2];
#ifdef DRAWLKSTATUS
bool dodrawlkstatus=false;
#endif
#ifndef DITHER
if (MapSpaceMode==MSM_WELCOME) {
if (INVERTCOLORS)
hB=LKBrush_Petrol;
else
hB=LKBrush_Mlight;
} else {
if (INVERTCOLORS)
hB=LKBrush_Mdark;
else
hB=LKBrush_Mlight;
}
#else
if (INVERTCOLORS)
hB=LKBrush_Black;
else
hB=LKBrush_White;
#endif
const auto oldfont = Surface.SelectObject(LKINFOFONT); // save font
if (MapSpaceMode==MSM_WELCOME) {
LKBitmap WelcomeBitmap = LoadSplash(_T("LKPROFILE"));
if(WelcomeBitmap) {
DrawSplash(Surface, WelcomeBitmap);
}
} else {
Surface.FillRect(&rc, hB);
}
// Paint borders in green, but only in nearest pages and welcome, and not in DITHER mode
// In case we want it in dithered mode, some changes are ready to be used.
#ifndef DITHER
if (MapSpaceMode==MSM_WELCOME || (!IsMultiMap() && MapSpaceMode!=MSM_MAP) )
{
#ifdef DITHER
LKPen BorderPen(PEN_SOLID, ScreenThinSize, INVERTCOLORS?RGB_WHITE:RGB_BLACK);
#else
LKPen BorderPen(PEN_SOLID, ScreenThinSize, INVERTCOLORS?RGB_GREEN:RGB_DARKGREEN);
#endif
auto OldPen = Surface.SelectObject(BorderPen);
auto OldBrush = Surface.SelectObject(LK_HOLLOW_BRUSH);
Surface.Rectangle(rc.left, rc.top, rc.right, rc.bottom - BottomSize);
Surface.SelectObject(OldPen);
Surface.SelectObject(OldBrush);
}
#endif
#ifdef DRAWLKSTATUS
if (LKevent==LKEVENT_NEWRUN) dodrawlkstatus=true;
#endif
// We are entering mapspacemodes with no initial check on configured subpages.
// Thus we need to ensure that the page is really available, or find the first valid.
// However, this will prevent direct customkey access to pages!
// Instead, we do it when we call next page from InfoPageChange
// if (!ConfIP[ModeIndex][CURTYPE]) NextModeType();
switch (MapSpaceMode) {
case MSM_WELCOME:
#if 0
SetModeType(LKMODE_MAP,MP_MOVING);
RefreshMap();
break;
#endif
#if (1)
if (!DrawInfo.NAVWarning) {
static double firsttime=DrawInfo.Time;
// delayed automatic exit from welcome mode
if ( DrawInfo.Time > (firsttime+3.0) ) {
SetModeType(LKMODE_MAP,MP_MOVING);
LKevent=LKEVENT_NONE;
LKSound(_T("LK_BEEP1.WAV"));
RefreshMap();
break;
}
}
#endif
if(GlobalModelType==MODELTYPE_PNA_MINIMAP)
{
SetModeType(LKMODE_MAP,MP_MOVING);
LKevent=LKEVENT_NONE;
break;
}
DrawWelcome8000(Surface, rc);
break;
case MSM_MAPTRK:
SetSideviewPage(IM_HEADING);
LKDrawMultimap_Asp(Surface,rc);
break;
case MSM_MAPWPT:
#if 0
// If there is no destination, force jump to the map
if (GetOvertargetIndex()<0) {
SetModeType(LKMODE_MAP,MP_MOVING);
LKevent=LKEVENT_NONE;
break;
}
#endif
SetSideviewPage(IM_NEXT_WP);
LKDrawMultimap_Asp(Surface,rc);
break;
case MSM_MAPASP:
SetSideviewPage(IM_NEAR_AS);
LKDrawMultimap_Asp(Surface,rc);
break;
case MSM_MAPRADAR:
LKDrawMultimap_Radar(Surface,rc);
break;
case MSM_VISUALGLIDE:
SetSideviewPage(IM_VISUALGLIDE);
LKDrawMultimap_Asp(Surface,rc);
break;
case MSM_MAPTEST:
LKDrawMultimap_Test(Surface,rc);
break;
case MSM_LANDABLE:
case MSM_NEARTPS:
case MSM_AIRPORTS:
case MSM_COMMON:
case MSM_RECENT:
case MSM_AIRSPACES:
case MSM_THERMALS:
case MSM_TRAFFIC:
DrawNearest(Surface, rc);
break;
case MSM_MAP:
break;
case MSM_INFO_THERMAL:
case MSM_INFO_CRUISE:
case MSM_INFO_TASK:
case MSM_INFO_AUX:
case MSM_INFO_TRI:
case MSM_INFO_HSI:
case MSM_INFO_TRF:
case MSM_INFO_TARGET:
case MSM_INFO_CONTEST:
DrawInfoPage(Surface,rc, false);
break;
default:
memset((void*)&TextDisplayMode, 0, sizeof(TextDisplayMode));
TextDisplayMode.Color = RGB_WHITE;
TextDisplayMode.NoSetFont = 1;
TextDisplayMode.AlligneCenter = 1;
Surface.SelectObject(LK8TargetFont);
_stprintf(Buffer,TEXT("MapSpaceMode=%d"),MapSpaceMode);
TextInBox(Surface, &rc, Buffer, (rc.right+rc.left)/2, NIBLSCALE(50) , &TextDisplayMode, false);
break;
}
#ifdef DRAWLKSTATUS
// no need to clear dodrawlkstatus, it is already reset at each run
if (dodrawlkstatus) DrawLKStatus(hdc, rc);
#endif
Surface.SelectObject(oldfont);
}
void RenderAirspaceTerrain(LKSurface& Surface, double PosLat, double PosLon, double brg, DiagrammStruct* psDiag) {
RECT rc = psDiag->rc;
//rc.bottom +=BORDER_Y;
double range = psDiag->fXMax - psDiag->fXMin; // km
double hmax = psDiag->fYMax;
double lat, lon;
int i, j;
if (!IsDithered() && IsMultimapTerrain()) {
RenderSky(Surface, rc, SKY_HORIZON_COL, SKY_SPACE_COL, GC_NO_COLOR_STEPS);
} else {
Surface.FillRect(&rc, MapWindow::hInvBackgroundBrush[BgMapColor]);
}
FindLatitudeLongitude(PosLat, PosLon, brg, psDiag->fXMin, &lat, &lon);
POINT apTerrainPolygon[AIRSPACE_SCANSIZE_X + 4] = {};
double d_lat[AIRSPACE_SCANSIZE_X] = {};
double d_lon[AIRSPACE_SCANSIZE_X] = {};
double d_h[AIRSPACE_SCANSIZE_X] = {};
#define FRAMEWIDTH 2
RasterTerrain::Lock(); // want most accurate rounding here
RasterTerrain::SetTerrainRounding(0, 0);
double fj;
for (j = 0; j < AIRSPACE_SCANSIZE_X; j++) { // scan range
fj = (double) j * 1.0 / (double) (AIRSPACE_SCANSIZE_X - 1);
FindLatitudeLongitude(lat, lon, brg, range*fj, &d_lat[j], &d_lon[j]);
d_h[j] = RasterTerrain::GetTerrainHeight(d_lat[j], d_lon[j]);
if (d_h[j] == TERRAIN_INVALID) d_h[j] = 0; //@ 101027 BUGFIX
hmax = max(hmax, d_h[j]);
}
RasterTerrain::Unlock();
/********************************************************************************
* scan line
********************************************************************************/
if (IsMultimapAirspace())
Sideview_iNoHandeldSpaces = CAirspaceManager::Instance().ScanAirspaceLineList(d_lat, d_lon, d_h, Sideview_pHandeled, MAX_NO_SIDE_AS); // Sideview_pHandeled[GC_MAX_NO];
else
Sideview_iNoHandeldSpaces = 0;
#if BUGSTOP
LKASSERT(Sideview_iNoHandeldSpaces < MAX_NO_SIDE_AS);
#endif
if (Sideview_iNoHandeldSpaces >= MAX_NO_SIDE_AS) Sideview_iNoHandeldSpaces = MAX_NO_SIDE_AS - 1;
/********************************************************************************
* bubble sort to start with biggest airspaces
********************************************************************************/
int iSizeLookupTable[MAX_NO_SIDE_AS];
for (i = 0; i < Sideview_iNoHandeldSpaces; i++)
iSizeLookupTable[i] = i;
for (i = 0; i < Sideview_iNoHandeldSpaces; i++) {
#if BUGSTOP
LKASSERT(iSizeLookupTable[i] < MAX_NO_SIDE_AS);
#endif
for (j = i; j < Sideview_iNoHandeldSpaces; j++) {
#if BUGSTOP
LKASSERT(iSizeLookupTable[j] < MAX_NO_SIDE_AS);
#endif
if (iSizeLookupTable[i] >= MAX_NO_SIDE_AS) continue;
if (iSizeLookupTable[j] >= MAX_NO_SIDE_AS) continue;
if (Sideview_pHandeled[iSizeLookupTable[i]].iAreaSize < Sideview_pHandeled[iSizeLookupTable[j]].iAreaSize) {
int iTmp = iSizeLookupTable[i];
iSizeLookupTable[i] = iSizeLookupTable[j];
iSizeLookupTable[j] = iTmp;
}
}
}
/**********************************************************************************
* transform into diagram coordinates
**********************************************************************************/
double dx1 = (double) (rc.right) / (double) (AIRSPACE_SCANSIZE_X - 1);
int x0 = rc.left;
LKASSERT(Sideview_iNoHandeldSpaces < MAX_NO_SIDE_AS);
for (i = 0; i < Sideview_iNoHandeldSpaces; i++) {
Sideview_pHandeled[i].rc.left = (long) ((Sideview_pHandeled[i].rc.left) * dx1) + x0 - FRAMEWIDTH / 2;
Sideview_pHandeled[i].rc.right = (long) ((Sideview_pHandeled[i].rc.right) * dx1) + x0 + FRAMEWIDTH / 2;
Sideview_pHandeled[i].rc.bottom = CalcHeightCoordinat((double) Sideview_pHandeled[i].rc.bottom, psDiag) + FRAMEWIDTH / 2;
Sideview_pHandeled[i].rc.top = CalcHeightCoordinat((double) Sideview_pHandeled[i].rc.top, psDiag) - FRAMEWIDTH / 2;
Sideview_pHandeled[i].iMaxBase = Sideview_pHandeled[i].rc.bottom;
Sideview_pHandeled[i].iMinTop = Sideview_pHandeled[i].rc.top;
int iN = Sideview_pHandeled[i].iNoPolyPts;
#if BUGSTOP
LKASSERT(iN < GC_MAX_POLYGON_PTS);
#endif
if (iN >= GC_MAX_POLYGON_PTS) iN = GC_MAX_POLYGON_PTS - 1;
if (Sideview_pHandeled[i].bRectAllowed == false) {
for (j = 0; j < iN; j++) {
Sideview_pHandeled[i].apPolygon[j].x = (long) (((Sideview_pHandeled[i].apPolygon[j].x) * dx1) + x0);
Sideview_pHandeled[i].apPolygon[j].y = CalcHeightCoordinat((double) Sideview_pHandeled[i].apPolygon[j].y, psDiag);
if (j != iN - 1) {
if ((j < iN / 2)) {
Sideview_pHandeled[i].iMaxBase = min((long) Sideview_pHandeled[i].iMaxBase, (long) Sideview_pHandeled[i].apPolygon[j].y);
} else {
Sideview_pHandeled[i].iMinTop = max((long) Sideview_pHandeled[i].iMinTop, (long) Sideview_pHandeled[i].apPolygon[j].y);
}
}
}
}
}
/**********************************************************************************
* draw airspaces
**********************************************************************************/
const auto oldpen = Surface.SelectObject(LK_NULL_PEN);
_TCHAR text [80];
LKASSERT(Sideview_iNoHandeldSpaces < MAX_NO_SIDE_AS);
for (int m = 0; m < Sideview_iNoHandeldSpaces; m++) {
int iSizeIdx = iSizeLookupTable[m];
#if BUGSTOP
LKASSERT(iSizeIdx < MAX_NO_SIDE_AS && iSizeIdx >= 0);
#endif
if (iSizeIdx >= MAX_NO_SIDE_AS) iSizeIdx = MAX_NO_SIDE_AS - 1;
int type = Sideview_pHandeled[iSizeIdx].iType;
RECT rcd = Sideview_pHandeled[iSizeIdx].rc;
LKColor FrameColor;
double fFrameColFact;
if (Sideview_pHandeled[iSizeIdx].bEnabled) {
Surface.SelectObject(MapWindow::GetAirspaceBrushByClass(type));
Surface.SetTextColor(MapWindow::GetAirspaceColourByClass(type));
fFrameColFact = 0.8;
FrameColor = MapWindow::GetAirspaceColourByClass(type);
} else {
Surface.SelectObject(LKBrush_Hollow);
Surface.SetTextColor(RGB_GGREY);
FrameColor = RGB_GGREY;
fFrameColFact = 1.2;
}
if (INVERTCOLORS)
fFrameColFact *= 0.8;
else
fFrameColFact *= 1.2;
LKColor Color = FrameColor.ChangeBrightness(fFrameColFact);
LKPen mpen2(PEN_SOLID, FRAMEWIDTH, Color);
const auto oldpen2 = Surface.SelectObject(mpen2);
if (Sideview_pHandeled[iSizeIdx].bRectAllowed == true)
Surface.Rectangle(rcd.left + 1, rcd.top, rcd.right, rcd.bottom);
else
Surface.Polygon(Sideview_pHandeled[iSizeIdx].apPolygon, Sideview_pHandeled[iSizeIdx].iNoPolyPts);
Surface.SelectObject(oldpen2);
if (Sideview_pHandeled[iSizeIdx].bEnabled)
Surface.SetTextColor(Sideview_TextColor); // RGB_MENUTITLEFG
else
Surface.SetTextColor(RGB_GGREY);
/***********************************************
* build view overlap for centering text
***********************************************/
rcd.bottom = min(rcd.bottom, Sideview_pHandeled[iSizeIdx].iMaxBase);
rcd.top = max(rcd.top, Sideview_pHandeled[iSizeIdx].iMinTop);
rcd.left = max(rcd.left, rc.left);
rcd.right = min(rcd.right, rc.right);
rcd.bottom = min(rcd.bottom, rc.bottom);
rcd.top = max(rcd.top, rc.top);
SIZE textsize;
SIZE aispacesize = {rcd.right - rcd.left, rcd.bottom - rcd.top};
LK_tcsncpy(text, Sideview_pHandeled[iSizeIdx].szAS_Name, NAME_SIZE - 1/* sizeof(text)/sizeof(text[0])*/);
Surface.GetTextSize(text, &textsize);
int x = rcd.left + aispacesize.cx / 2;
;
int y = rcd.top + aispacesize.cy / 2;
// int iTextheight = tsize.cy;
int iOffset = 0;
BOOL blongtext = false;
if (aispacesize.cy > (2 * textsize.cy) && (textsize.cx < aispacesize.cx)) {
iOffset = textsize.cy / 2;
}
if ((textsize.cx < aispacesize.cx) && (textsize.cy < aispacesize.cy)) {
Surface.DrawText(x - textsize.cx / 2, y - iOffset - textsize.cy / 2, text);
blongtext = true;
}
LK_tcsncpy(text, CAirspaceManager::Instance().GetAirspaceTypeShortText(Sideview_pHandeled[iSizeIdx].iType), NAME_SIZE);
Surface.GetTextSize(text, &textsize);
if (textsize.cx < aispacesize.cx) {
if (2 * textsize.cy < aispacesize.cy) {
Surface.DrawText(x - textsize.cx / 2, y + iOffset - textsize.cy / 2, text);
} else {
if ((textsize.cy < aispacesize.cy) && (!blongtext))
Surface.DrawText(x - textsize.cx / 2, y - iOffset - textsize.cy / 2, text);
}
}
}
Surface.SelectObject(oldpen);
/**********************************************************************************
* draw airspace frames in reversed order
**********************************************************************************/
#ifdef OUTLINE_2ND
for (int m = 0; m < Sideview_iNoHandeldSpaces; m++) {
int iSizeIdx = iSizeLookupTable[Sideview_iNoHandeldSpaces - m - 1];
if (Sideview_pHandeled[iSizeIdx].bEnabled) {
#if BUGSTOP
LKASSERT(iSizeIdx < MAX_NO_SIDE_AS);
#endif
if (iSizeIdx >= MAX_NO_SIDE_AS) iSizeIdx = MAX_NO_SIDE_AS - 1;
int type = Sideview_pHandeled[iSizeIdx].iType;
RECT rcd = Sideview_pHandeled[iSizeIdx].rc;
LKColor FrameColor = MapWindow::GetAirspaceColourByClass(type);
double fFrameColFact;
Surface.SelectObject(LKBrush_Hollow);
if (Sideview_pHandeled[iSizeIdx].bEnabled) {
// Surface.SelectObject(MapWindow::GetAirspaceBrushByClass(type));
Surface.SetTextColor(MapWindow::GetAirspaceColourByClass(type));
fFrameColFact = 0.8;
} else {
Surface.SetTextColor(RGB_GGREY);
FrameColor = RGB_GGREY;
fFrameColFact = 1.2;
}
if (INVERTCOLORS)
fFrameColFact *= 0.8;
else
fFrameColFact *= 1.2;
LKColor lColor = FrameColor.ChangeBrightness(fFrameColFact);
LKPen mpen2(PEN_SOLID, FRAMEWIDTH, lColor);
const auto oldpen2 = Surface.SelectObject(mpen2);
if (Sideview_pHandeled[iSizeIdx].bRectAllowed == true)
Surface.Rectangle(rcd.left + 1, rcd.top, rcd.right, rcd.bottom);
else
Surface.Polygon(Sideview_pHandeled[iSizeIdx].apPolygon, Sideview_pHandeled[iSizeIdx].iNoPolyPts);
Surface.SelectObject(oldpen2);
}
}
#endif
/*************************************************************
* draw ground
*************************************************************/
// draw ground
/*********************************************************************
* draw terrain
*********************************************************************/
LKPen hpHorizonGround(PEN_SOLID, IBLSCALE(1) + 1, LKColor(126, 62, 50));
LKBrush hbHorizonGround(GROUND_COLOUR);
const auto oldPen = Surface.SelectObject(hpHorizonGround);
const auto oldBrush = Surface.SelectObject(hbHorizonGround);
for (j = 0; j < AIRSPACE_SCANSIZE_X; j++) { // scan range
apTerrainPolygon[j].x = iround(j * dx1) + x0;
apTerrainPolygon[j].y = CalcHeightCoordinat(d_h[j], psDiag);
}
apTerrainPolygon[AIRSPACE_SCANSIZE_X].x = iround(AIRSPACE_SCANSIZE_X * dx1) + x0;
; // x0;
apTerrainPolygon[AIRSPACE_SCANSIZE_X].y = CalcHeightCoordinat(0, psDiag); //iBottom;
apTerrainPolygon[AIRSPACE_SCANSIZE_X + 1].x = iround(0 * dx1) + x0; //iround(j*dx1)+x0;
apTerrainPolygon[AIRSPACE_SCANSIZE_X + 1].y = CalcHeightCoordinat(0, psDiag); //iBottom;
apTerrainPolygon[AIRSPACE_SCANSIZE_X + 2] = apTerrainPolygon[0];
static_assert(array_size(apTerrainPolygon) >= AIRSPACE_SCANSIZE_X + 3, "wrong array size");
Surface.Polygon(apTerrainPolygon, AIRSPACE_SCANSIZE_X + 3);
Surface.SelectObject(oldPen);
Surface.SelectObject(oldBrush);
/*********************************************************************
* draw sea
*********************************************************************/
#ifdef MSL_SEA_DRAW
// draw sea
if (psDiag->fYMin < GC_SEA_LEVEL_TOLERANCE) {
RECT sea = {rc.left, rc.bottom, rc.right, rc.bottom + SV_BORDER_Y};
#ifndef UNDITHER
RenderSky(Surface, sea, RGB_STEEL_BLUE, RGB_ROYAL_BLUE, 7);
#else
RenderSky(Surface, sea, RGB_BLACK, RGB_BLACK, 2);
#endif
}
#else
if (psDiag->fYMin < GC_SEA_LEVEL_TOLERANCE)
Rectangle(hdc, rc.left, rc.bottom, rc.right, rc.bottom + BORDER_Y);
#endif
Surface.SetTextColor(Sideview_TextColor); // RGB_MENUTITLEFG
}
