void FOOTPRINT_VIEWER_FRAME::SelectCurrentFootprint( wxCommandEvent& event )
{
PCB_EDIT_FRAME* parent = (PCB_EDIT_FRAME*) GetParent();
wxString libname = m_libraryName + wxT( "." ) + LegacyFootprintLibPathExtension;
MODULE* oldmodule = GetBoard()->m_Modules;
MODULE* module = LoadModuleFromLibrary( libname, parent->FootprintLibs(),
false );
if( module )
{
module->SetPosition( wxPoint( 0, 0 ) );
// Only one footprint allowed: remove the previous footprint (if exists)
if( oldmodule )
{
GetBoard()->Remove( oldmodule );
delete oldmodule;
}
m_footprintName = FROM_UTF8( module->GetFPID().GetFootprintName().c_str() );
module->ClearFlags();
SetCurItem( NULL );
Zoom_Automatique( false );
m_canvas->Refresh();
Update3D_Frame();
m_footprintList->SetStringSelection( m_footprintName );
}
}
/**
* Abort text move in progress.
*
* If a text is selected, its initial coordinates are regenerated.
*/
static void AbortMoveTextModule( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
BASE_SCREEN* screen = Panel->GetScreen();
TEXTE_MODULE* Text = static_cast<TEXTE_MODULE*>( screen->GetCurItem() );
MODULE* Module;
Panel->SetMouseCapture( NULL, NULL );
if( Text == NULL )
return;
Module = static_cast<MODULE*>( Text->GetParent() );
Text->DrawUmbilical( Panel, DC, GR_XOR, -MoveVector );
Text->Draw( Panel, DC, GR_XOR, MoveVector );
// If the text was moved (the move does not change internal data)
// it could be rotated while moving. So set old value for orientation
if( Text->IsMoving() )
Text->SetTextAngle( TextInitialOrientation );
// Redraw the text
Panel->RefreshDrawingRect( Text->GetBoundingBox() );
// leave it at (0,0) so we can use it Rotate when not moving.
MoveVector.x = MoveVector.y = 0;
Text->ClearFlags();
Module->ClearFlags();
screen->SetCurItem( NULL );
}
void PCB_EDIT_FRAME::Block_Delete()
{
OnModify();
SetCurItem( NULL );
PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems();
itemsList->m_Status = UR_DELETED;
// unlink items and clear flags
for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ )
{
BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii );
itemsList->SetPickedItemStatus( UR_DELETED, ii );
GetBoard()->GetConnectivity()->Remove( item );
switch( item->Type() )
{
case PCB_MODULE_T:
{
MODULE* module = (MODULE*) item;
module->ClearFlags();
module->UnLink();
m_Pcb->m_Status_Pcb = 0;
}
break;
case PCB_ZONE_AREA_T: // a zone area
m_Pcb->Remove( item );
break;
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
item->UnLink();
break;
// These items are deleted, but not put in undo list
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
item->UnLink();
itemsList->RemovePicker( ii );
ii--;
item->DeleteStructure();
break;
default:
wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Delete( ) error: unexpected type" ) );
break;
}
}
SaveCopyInUndoList( *itemsList, UR_DELETED );
Compile_Ratsnest( NULL, true );
m_canvas->Refresh( true );
}
bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
{
MODULE* newModule;
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( frame == NULL ) // happens if no board editor opened
return false;
if( aModule == NULL )
{
if( ! frame->GetBoard() || ! frame->GetBoard()->m_Modules )
return false;
aModule = SelectFootprint( frame->GetBoard() );
}
if( aModule == NULL )
return false;
SetCurItem( NULL );
Clear_Pcb( false );
GetBoard()->m_Status_Pcb = 0;
newModule = new MODULE( *aModule );
newModule->SetParent( GetBoard() );
newModule->SetLink( aModule->GetTimeStamp() );
aModule = newModule;
GetBoard()->Add( newModule );
newModule->ClearFlags();
// Clear references to net info, because the footprint editor
// does know any thing about nets handled by the current edited board.
// Morever the main board can change or the net info relative to this main board
// can change while editing this footprint in the footprint editor
for( D_PAD* pad = newModule->Pads(); pad; pad = pad->Next() )
pad->SetNetCode( NETINFO_LIST::UNCONNECTED );
SetCrossHairPosition( wxPoint( 0, 0 ) );
PlaceModule( newModule, NULL );
// Put it on FRONT layer,
// because this is the default in ModEdit, and in libs
if( newModule->GetLayer() != LAYER_N_FRONT )
newModule->Flip( newModule->GetPosition() );
// Put it in orientation 0,
// because this is the default orientation in ModEdit, and in libs
Rotate_Module( NULL, newModule, 0, false );
GetScreen()->ClrModify();
Zoom_Automatique( false );
return true;
}
void PCB_BASE_FRAME::PlaceTexteModule( TEXTE_MODULE* Text, wxDC* DC )
{
if( Text != NULL )
{
m_canvas->RefreshDrawingRect( Text->GetBoundingBox() );
Text->DrawUmbilical( m_canvas, DC, GR_XOR, -MoveVector );
// Update the coordinates for anchor.
MODULE* Module = static_cast<MODULE*>( Text->GetParent() );
if( Module )
{
// Prepare undo command (a rotation can be made while moving)
double tmp = Text->GetTextAngle();
Text->SetTextAngle( TextInitialOrientation );
if( IsType( FRAME_PCB ) )
SaveCopyInUndoList( Module, UR_CHANGED );
else
SaveCopyInUndoList( Module, UR_CHANGED );
Text->SetTextAngle( tmp );
// Set the new position for text.
Text->SetTextPos( GetCrossHairPosition() );
wxPoint textRelPos = Text->GetTextPos() - Module->GetPosition();
RotatePoint( &textRelPos, -Module->GetOrientation() );
Text->SetPos0( textRelPos );
Text->ClearFlags();
Module->ClearFlags();
Module->SetLastEditTime();
OnModify();
// Redraw text.
m_canvas->RefreshDrawingRect( Text->GetBoundingBox() );
}
else
{
Text->SetTextPos( GetCrossHairPosition() );
}
}
// leave it at (0,0) so we can use it Rotate when not moving.
MoveVector.x = MoveVector.y = 0;
m_canvas->SetMouseCapture( NULL, NULL );
}
void EDIT_TOOL::remove( BOARD_ITEM* aItem )
{
BOARD* board = getModel<BOARD>();
switch( aItem->Type() )
{
case PCB_MODULE_T:
{
MODULE* module = static_cast<MODULE*>( aItem );
module->ClearFlags();
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, getView(), _1 ) );
// Module itself is deleted after the switch scope is finished
// list of pads is rebuild by BOARD::BuildListOfNets()
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
// Default removal procedure
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( aItem );
switch( text->GetType() )
{
case TEXTE_MODULE::TEXT_is_REFERENCE:
DisplayError( getEditFrame<PCB_BASE_FRAME>(), _( "Cannot delete component reference." ) );
return;
case TEXTE_MODULE::TEXT_is_VALUE:
DisplayError( getEditFrame<PCB_BASE_FRAME>(), _( "Cannot delete component value." ) );
return;
case TEXTE_MODULE::TEXT_is_DIVERS: // suppress warnings
break;
}
if( m_editModules )
{
MODULE* module = static_cast<MODULE*>( aItem->GetParent() );
module->SetLastEditTime();
board->m_Status_Pcb = 0; // it is done in the legacy view
aItem->DeleteStructure();
}
return;
}
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
{
MODULE* module = static_cast<MODULE*>( aItem->GetParent() );
module->SetLastEditTime();
board->m_Status_Pcb = 0; // it is done in the legacy view
if( !m_editModules )
{
getView()->Remove( aItem );
board->Remove( aItem );
}
aItem->DeleteStructure();
return;
}
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
case PCB_ZONE_AREA_T:
break;
default: // other types do not need to (or should not) be handled
assert( false );
return;
}
getView()->Remove( aItem );
board->Remove( aItem );
}
/*
* Function GlobalChange_PadSettings
* Function to change pad caracteristics for the given footprint
* or alls footprints which look like the given footprint
* aPad is the pattern. The given footprint is the parent of this pad
* aSameFootprints: if true, make changes on all identical footprints
* aPadShapeFilter: if true, make changes only on pads having the same shape as aPad
* aPadOrientFilter: if true, make changes only on pads having the same orientation as aPad
* aPadLayerFilter: if true, make changes only on pads having the same layers as aPad
* aRedraw: if true: redraws the footprint
* aSaveForUndo: if true: create an entry in the Undo/Redo list
* (usually: true in Schematic editor, false in Module editor)
*/
void PCB_BASE_FRAME::GlobalChange_PadSettings( D_PAD* aPad,
bool aSameFootprints,
bool aPadShapeFilter,
bool aPadOrientFilter,
bool aPadLayerFilter,
bool aRedraw, bool aSaveForUndo )
{
if( aPad == NULL )
aPad = &GetDesignSettings().m_Pad_Master;
MODULE* module = aPad->GetParent();
if( module == NULL )
{
DisplayError( this, wxT( "Global_Import_Pad_Settings() Error: NULL module" ) );
return;
}
// Search and copy the name of library reference.
MODULE* Module_Ref = module;
double pad_orient = aPad->GetOrientation() - Module_Ref->GetOrientation();
// Prepare an undo list:
if( aSaveForUndo )
{
PICKED_ITEMS_LIST itemsList;
for( module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
bool saveMe = false;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Filters changes prohibited.
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
double currpad_orient = pad->GetOrientation() - module->GetOrientation();
if( aPadOrientFilter && ( currpad_orient != pad_orient ) )
continue;
if( aPadLayerFilter && pad->GetLayerSet() != aPad->GetLayerSet() )
continue;
saveMe = true;
}
if( saveMe )
{
ITEM_PICKER itemWrapper( module, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
}
SaveCopyInUndoList( itemsList, UR_CHANGED );
}
// Update the current module and same others modules if requested.
for( module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
// Erase module on screen
if( aRedraw )
{
module->SetFlags( DO_NOT_DRAW );
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
module->ClearFlags( DO_NOT_DRAW );
}
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Filters changes prohibited.
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
if( aPadOrientFilter && (pad->GetOrientation() - module->GetOrientation()) != pad_orient )
continue;
if( aPadLayerFilter )
{
if( pad->GetLayerSet() != aPad->GetLayerSet() )
continue;
else
m_Pcb->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK);
}
// Change characteristics:
pad->SetAttribute( aPad->GetAttribute() );
pad->SetShape( aPad->GetShape() );
pad->SetLayerSet( aPad->GetLayerSet() );
pad->SetSize( aPad->GetSize() );
pad->SetDelta( aPad->GetDelta() );
pad->SetOffset( aPad->GetOffset() );
pad->SetDrillSize( aPad->GetDrillSize() );
pad->SetDrillShape( aPad->GetDrillShape() );
pad->SetOrientation( pad_orient + module->GetOrientation() );
// copy also local mask margins, because these parameters usually depend on
// pad sizes and layers
pad->SetLocalSolderMaskMargin( aPad->GetLocalSolderMaskMargin() );
pad->SetLocalSolderPasteMargin( aPad->GetLocalSolderPasteMargin() );
pad->SetLocalSolderPasteMarginRatio( aPad->GetLocalSolderPasteMarginRatio() );
if( pad->GetShape() != PAD_TRAPEZOID )
{
pad->SetDelta( wxSize( 0, 0 ) );
}
if( pad->GetShape() == PAD_CIRCLE )
{
// Ensure pad size.y = pad size.x
int size = pad->GetSize().x;
pad->SetSize( wxSize( size, size ) );
}
switch( pad->GetAttribute() )
{
case PAD_SMD:
case PAD_CONN:
pad->SetDrillSize( wxSize( 0, 0 ) );
pad->SetOffset( wxPoint( 0, 0 ) );
break;
default:
break;
}
}
module->CalculateBoundingBox();
if( aRedraw )
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
}
OnModify();
}
bool FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD( MODULE* aModule )
{
MODULE* newModule;
PCB_EDIT_FRAME* frame = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( frame == NULL ) // happens if no board editor opened
return false;
if( aModule == NULL )
{
if( ! frame->GetBoard() || ! frame->GetBoard()->m_Modules )
return false;
aModule = SelectFootprint( frame->GetBoard() );
}
if( aModule == NULL )
return false;
SetCurItem( NULL );
Clear_Pcb( false );
GetBoard()->m_Status_Pcb = 0;
newModule = new MODULE( *aModule );
newModule->SetParent( GetBoard() );
newModule->SetLink( aModule->GetTimeStamp() );
aModule = newModule;
newModule->ClearFlags();
newModule->RunOnChildren( boost::bind( &clearModuleItemFlags, _1 ) );
GetBoard()->Add( newModule );
// Clear references to any net info, because the footprint editor
// does know any thing about nets handled by the current edited board.
// Morever we do not want to save any reference to an unknown net when
// saving the footprint in lib cache
// so we force the ORPHANED dummy net info for all pads
newModule->ClearAllNets();
SetCrossHairPosition( wxPoint( 0, 0 ) );
PlaceModule( newModule, NULL );
newModule->SetPosition( wxPoint( 0, 0 ) ); // cursor in GAL may not be initialized at the moment
// Put it on FRONT layer,
// because this is the default in ModEdit, and in libs
if( newModule->GetLayer() != F_Cu )
newModule->Flip( newModule->GetPosition() );
// Put it in orientation 0,
// because this is the default orientation in ModEdit, and in libs
Rotate_Module( NULL, newModule, 0, false );
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( IsGalCanvasActive() )
updateView();
return true;
}
void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos )
{
BOARD_ITEM* item = GetCurItem();
m_canvas->CrossHairOff( DC );
if( GetToolId() == ID_NO_TOOL_SELECTED )
{
if( item && item->GetFlags() ) // Move item command in progress
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
PlaceTexteModule( (TEXTE_MODULE*) item, DC );
break;
case PCB_MODULE_EDGE_T:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Place_EdgeMod( (EDGE_MODULE*) item );
break;
case PCB_PAD_T:
PlacePad( (D_PAD*) item, DC );
break;
default:
{
wxString msg;
msg.Printf( wxT( "WinEDA_ModEditFrame::OnLeftClick err:Struct %d, m_Flag %X" ),
item->Type(), item->GetFlags() );
DisplayError( this, msg );
item->ClearFlags();
break;
}
}
}
else
{
if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT )
&& !wxGetKeyState( WXK_CONTROL ) )
item = ModeditLocateAndDisplay();
SetCurItem( item );
}
}
item = GetCurItem();
bool no_item_edited = item == NULL || item->GetFlags() == 0;
switch( GetToolId() )
{
case ID_NO_TOOL_SELECTED:
break;
case ID_MODEDIT_CIRCLE_TOOL:
case ID_MODEDIT_ARC_TOOL:
case ID_MODEDIT_LINE_TOOL:
if( no_item_edited )
{
STROKE_T shape = S_SEGMENT;
if( GetToolId() == ID_MODEDIT_CIRCLE_TOOL )
shape = S_CIRCLE;
if( GetToolId() == ID_MODEDIT_ARC_TOOL )
shape = S_ARC;
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) NULL, DC, shape ) );
}
else if( item->IsNew() )
{
if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC )
{
End_Edge_Module( (EDGE_MODULE*) item );
SetCurItem( NULL );
m_canvas->Refresh();
}
else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT )
{
SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, S_SEGMENT ) );
}
else
{
DisplayError( this, wxT( "ProcessCommand error: item flags error" ) );
}
}
break;
case ID_MODEDIT_DELETE_TOOL:
if( ! no_item_edited ) // Item in edit, cannot delete it
break;
item = ModeditLocateAndDisplay();
if( item->Type() != PCB_MODULE_T ) // Cannot delete the module itself
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
RemoveStruct( item );
SetCurItem( NULL );
}
break;
case ID_MODEDIT_ANCHOR_TOOL:
{
MODULE* module = GetBoard()->m_Modules;
if( module == NULL // No module loaded
|| (module->GetFlags() != 0) )
break;
module->ClearFlags();
SaveCopyInUndoList( module, UR_MODEDIT );
Place_Ancre( module ); // set the new relatives internal coordinates of items
RedrawScreen( wxPoint( 0, 0 ), true );
// Replace the module in position 0, to recalculate absolutes coordinates of items
module->SetPosition( wxPoint( 0, 0 ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
SetCurItem( NULL );
m_canvas->Refresh();
}
break;
case ID_MODEDIT_PLACE_GRID_COORD:
m_canvas->DrawGridAxis( DC, GR_XOR );
GetScreen()->m_GridOrigin = GetScreen()->GetCrossHairPosition();
m_canvas->DrawGridAxis( DC, GR_COPY );
GetScreen()->SetModify();
break;
case ID_MODEDIT_TEXT_TOOL:
if( GetBoard()->m_Modules == NULL )
break;
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
CreateTextModule( GetBoard()->m_Modules, DC );
break;
case ID_MODEDIT_PAD_TOOL:
if( GetBoard()->m_Modules )
{
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
AddPad( GetBoard()->m_Modules, true );
}
break;
default:
DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessCommand error" ) );
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
m_canvas->CrossHairOn( DC );
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( Self_On == 0 )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
Self_On = 0;
Mself.m_End = GetCrossHairPosition();
wxPoint pt = Mself.m_End - Mself.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
Mself.lng = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, Mself.lng );
wxTextEntryDialog dlg( this, _( "Length:" ), _( "Length" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
Mself.lng = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( Mself.lng < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
Mself.m_Width = GetBoard()->GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, Mself.m_Start, Mself.m_End, Mself.lng, Mself.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate module.
MODULE* module;
module = Create_1_Module( wxEmptyString );
if( module == NULL )
return NULL;
// here the module is already in the BOARD, Create_1_Module() does that.
module->SetFPID( FPID( std::string( "MuSelf" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( Mself.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( Mself.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( Mself.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( Mself.m_Width, Mself.m_Width ) );
pad->SetLayerMask( GetLayerMask( module->GetLayer() ) );
pad->SetAttribute( PAD_SMD );
pad->SetShape( PAD_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( Mself.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( Mself.m_Start.x + Mself.m_End.x ) / 2,
( Mself.m_Start.y + Mself.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetTextPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetTextPosition( valPos );
module->Reference().SetPos0( module->Reference().GetTextPosition() - module->GetPosition() );
module->Value().SetPos0( module->Value().GetTextPosition() - module->GetPosition() );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}
void BOARD_COMMIT::Push( const wxString& aMessage )
{
// Objects potentially interested in changes:
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) m_toolMgr->GetEditFrame();
RN_DATA* ratsnest = board->GetRatsnest();
std::set<EDA_ITEM*> savedModules;
if( Empty() )
return;
for( COMMIT_LINE& ent : m_changes )
{
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
BOARD_ITEM* boardItem = static_cast<BOARD_ITEM*>( ent.m_item );
// Module items need to be saved in the undo buffer before modification
if( m_editModules )
{
// Be sure that we are storing a module
if( ent.m_item->Type() != PCB_MODULE_T )
ent.m_item = ent.m_item->GetParent();
// We have not saved the module yet, so let's create an entry
if( savedModules.count( ent.m_item ) == 0 )
{
if( !ent.m_copy )
{
assert( changeType != CHT_MODIFY ); // too late to make a copy..
ent.m_copy = ent.m_item->Clone();
}
assert( ent.m_item->Type() == PCB_MODULE_T );
assert( ent.m_copy->Type() == PCB_MODULE_T );
ITEM_PICKER itemWrapper( ent.m_item, UR_CHANGED );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
frame->SaveCopyInUndoList( undoList, UR_CHANGED );
savedModules.insert( ent.m_item );
static_cast<MODULE*>( ent.m_item )->SetLastEditTime();
}
}
switch( changeType )
{
case CHT_ADD:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_NEW ) );
if( !( changeFlags & CHT_DONE ) )
board->Add( boardItem );
//ratsnest->Add( boardItem ); // TODO currently done by BOARD::Add()
if( boardItem->Type() == PCB_MODULE_T )
{
MODULE* mod = static_cast<MODULE*>( boardItem );
mod->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) );
}
}
else
{
// modules inside modules are not supported yet
assert( boardItem->Type() != PCB_MODULE_T );
if( !( changeFlags & CHT_DONE ) )
board->m_Modules->Add( boardItem );
}
view->Add( boardItem );
break;
}
case CHT_REMOVE:
{
if( !m_editModules )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
}
switch( boardItem->Type() )
{
// Module items
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
case PCB_MODULE_TEXT_T:
{
// Do not allow footprint text removal when not editing a module
if( !m_editModules )
break;
bool remove = true;
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );
switch( text->GetType() )
{
case TEXTE_MODULE::TEXT_is_REFERENCE:
//DisplayError( frame, _( "Cannot delete component reference." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_VALUE:
//DisplayError( frame, _( "Cannot delete component value." ) );
remove = false;
break;
case TEXTE_MODULE::TEXT_is_DIVERS: // suppress warnings
break;
default:
assert( false );
break;
}
}
if( remove )
{
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
{
MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
assert( module && module->Type() == PCB_MODULE_T );
module->Delete( boardItem );
}
board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
}
break;
}
// Board items
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_T: // SEG_ZONE items are now deprecated
case PCB_ZONE_AREA_T:
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
board->Remove( boardItem );
//ratsnest->Remove( boardItem ); // currently done by BOARD::Remove()
break;
case PCB_MODULE_T:
{
// There are no modules inside a module yet
assert( !m_editModules );
MODULE* module = static_cast<MODULE*>( boardItem );
module->ClearFlags();
module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) );
view->Remove( module );
if( !( changeFlags & CHT_DONE ) )
board->Remove( module );
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
default: // other types do not need to (or should not) be handled
assert( false );
break;
}
break;
}
case CHT_MODIFY:
{
if( !m_editModules )
{
ITEM_PICKER itemWrapper( boardItem, UR_CHANGED );
assert( ent.m_copy );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
}
boardItem->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
ratsnest->Update( boardItem );
break;
}
default:
assert( false );
break;
}
}
if( !m_editModules )
frame->SaveCopyInUndoList( undoList, UR_UNSPECIFIED );
frame->OnModify();
ratsnest->Recalculate();
clear();
}
/*
* Function DoPushPadProperties
* Function to change pad properties for the given footprint or all identical footprints
* aPad is the pattern. The given footprint is the parent of this pad
* aSameFootprints: if true, make changes on all identical footprints
* aPadShapeFilter: if true, make changes only on pads having the same shape as aPad
* aPadOrientFilter: if true, make changes only on pads having the same orientation as aPad
* aPadLayerFilter: if true, make changes only on pads having the same layers as aPad
* aSaveForUndo: if true: create an entry in the Undo/Redo list
* (usually: true in Schematic editor, false in Module editor)
*/
void PCB_BASE_FRAME::DoPushPadProperties( D_PAD* aPad, bool aSameFootprints,
bool aPadShapeFilter,
bool aPadOrientFilter,
bool aPadLayerFilter,
bool aSaveForUndo )
{
MODULE* Module_Ref = aPad->GetParent();
double pad_orient = aPad->GetOrientation() - Module_Ref->GetOrientation();
// Prepare an undo list:
if( aSaveForUndo )
{
PICKED_ITEMS_LIST itemsList;
if( aSameFootprints )
{
for( MODULE* module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( module->GetFPID() == Module_Ref->GetFPID() )
{
ITEM_PICKER itemWrapper( module, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
}
}
else
{
ITEM_PICKER itemWrapper( Module_Ref, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
SaveCopyInUndoList( itemsList, UR_CHANGED );
}
// Update the current module and same others modules if requested.
for( MODULE* module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
// Erase module on screen
module->SetFlags( DO_NOT_DRAW );
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
module->ClearFlags( DO_NOT_DRAW );
for( D_PAD* pad = module->PadsList(); pad; pad = pad->Next() )
{
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
double currpad_orient = pad->GetOrientation() - module->GetOrientation();
if( aPadOrientFilter && ( currpad_orient != pad_orient ) )
continue;
if( aPadLayerFilter && ( pad->GetLayerSet() != aPad->GetLayerSet() ) )
continue;
// Do not copy pad to itself, it can create issues with custom pad primitives.
if( pad == aPad )
continue;
pad->ImportSettingsFromMaster( *aPad );
}
module->CalculateBoundingBox();
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
}
OnModify();
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( s_inductor_pattern.m_Flag == false )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
s_inductor_pattern.m_Flag = false;
s_inductor_pattern.m_End = GetCrossHairPosition();
wxPoint pt = s_inductor_pattern.m_End - s_inductor_pattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
s_inductor_pattern.m_lenght = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, s_inductor_pattern.m_lenght );
wxTextEntryDialog dlg( this, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
s_inductor_pattern.m_lenght = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( s_inductor_pattern.m_lenght < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
s_inductor_pattern.m_Width = GetDesignSettings().GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, s_inductor_pattern.m_Start,
s_inductor_pattern.m_End, s_inductor_pattern.m_lenght,
s_inductor_pattern.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate footprint. the value is also used as footprint name.
msg.Empty();
wxTextEntryDialog cmpdlg( this, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return NULL; // Aborted by user
MODULE* module = CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( FPID( std::string( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( s_inductor_pattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( s_inductor_pattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( s_inductor_pattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( s_inductor_pattern.m_Width, s_inductor_pattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( s_inductor_pattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( s_inductor_pattern.m_Start.x + s_inductor_pattern.m_End.x ) / 2,
( s_inductor_pattern.m_Start.y + s_inductor_pattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}
MODULE* MWAVE::CreateMicrowaveInductor( INDUCTOR_PATTERN& inductorPattern,
PCB_EDIT_FRAME* aPcbFrame, wxString& aErrorMessage )
{
/* Build a microwave inductor footprint.
* - Length Mself.lng
* - Extremities Mself.m_Start and Mself.m_End
* We must determine:
* Mself.nbrin = number of segments perpendicular to the direction
* (The coil nbrin will demicercles + 1 + 2 1 / 4 circle)
* Mself.lbrin = length of a strand
* Mself.radius = radius of rounded parts of the coil
* Mself.delta = segments extremities connection between him and the coil even
*
* The equations are
* Mself.m_Size.x = 2 * Mself.radius + Mself.lbrin
* Mself.m_Size.y * Mself.delta = 2 + 2 * Mself.nbrin * Mself.radius
* Mself.lng = 2 * Mself.delta / / connections to the coil
+ (Mself.nbrin-2) * Mself.lbrin / / length of the strands except 1st and last
+ (Mself.nbrin 1) * (PI * Mself.radius) / / length of rounded
* Mself.lbrin + / 2 - Melf.radius * 2) / / length of 1st and last bit
*
* The constraints are:
* Nbrin >= 2
* Mself.radius < Mself.m_Size.x
* Mself.m_Size.y = Mself.radius * 4 + 2 * Mself.raccord
* Mself.lbrin> Mself.radius * 2
*
* The calculation is conducted in the following way:
* Initially:
* Nbrin = 2
* Radius = 4 * m_Size.x (arbitrarily fixed value)
* Then:
* Increasing the number of segments to the desired length
* (Radius decreases if necessary)
*/
D_PAD* pad;
int ll;
wxString msg;
auto pt = inductorPattern.m_End - inductorPattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
inductorPattern.m_length = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, inductorPattern.m_length );
wxTextEntryDialog dlg( nullptr, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return nullptr; // canceled by user
msg = dlg.GetValue();
inductorPattern.m_length = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( inductorPattern.m_length < min_len )
{
aErrorMessage = _( "Requested length < minimum length" );
return nullptr;
}
// Calculate the elements.
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, inductorPattern.m_Start,
inductorPattern.m_End, inductorPattern.m_length,
inductorPattern.m_Width );
if( !ll )
{
aErrorMessage = _( "Requested length too large" );
return nullptr;
}
// Generate footprint. the value is also used as footprint name.
msg = "L";
wxTextEntryDialog cmpdlg( nullptr, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return nullptr; // Aborted by user
MODULE* module = aPcbFrame->CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( LIB_ID( wxString( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( inductorPattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( inductorPattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItemsList().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->PadsList().PushFront( pad );
pad->SetName( "1" );
pad->SetPosition( inductorPattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( inductorPattern.m_Width, inductorPattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->PadsList().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetName( "2" );
pad->SetPosition( inductorPattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
wxPoint refPos( ( inductorPattern.m_Start.x + inductorPattern.m_End.x ) / 2,
( inductorPattern.m_Start.y + inductorPattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetTextSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetTextSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
return module;
}
void BOARD_COMMIT::Push( const wxString& aMessage, bool aCreateUndoEntry, bool aSetDirtyBit )
{
// Objects potentially interested in changes:
PICKED_ITEMS_LIST undoList;
KIGFX::VIEW* view = m_toolMgr->GetView();
BOARD* board = (BOARD*) m_toolMgr->GetModel();
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) m_toolMgr->GetEditFrame();
auto connectivity = board->GetConnectivity();
std::set<EDA_ITEM*> savedModules;
std::vector<BOARD_ITEM*> itemsToDeselect;
if( Empty() )
return;
for( COMMIT_LINE& ent : m_changes )
{
int changeType = ent.m_type & CHT_TYPE;
int changeFlags = ent.m_type & CHT_FLAGS;
BOARD_ITEM* boardItem = static_cast<BOARD_ITEM*>( ent.m_item );
// Module items need to be saved in the undo buffer before modification
if( m_editModules )
{
// Be sure that we are storing a module
if( ent.m_item->Type() != PCB_MODULE_T )
ent.m_item = ent.m_item->GetParent();
// We have not saved the module yet, so let's create an entry
if( savedModules.count( ent.m_item ) == 0 )
{
if( !ent.m_copy )
{
wxASSERT( changeType != CHT_MODIFY ); // too late to make a copy..
ent.m_copy = ent.m_item->Clone();
}
wxASSERT( ent.m_item->Type() == PCB_MODULE_T );
wxASSERT( ent.m_copy->Type() == PCB_MODULE_T );
if( aCreateUndoEntry )
{
ITEM_PICKER itemWrapper( ent.m_item, UR_CHANGED );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
frame->SaveCopyInUndoList( undoList, UR_CHANGED );
}
savedModules.insert( ent.m_item );
static_cast<MODULE*>( ent.m_item )->SetLastEditTime();
}
}
switch( changeType )
{
case CHT_ADD:
{
if( !m_editModules )
{
if( aCreateUndoEntry )
{
undoList.PushItem( ITEM_PICKER( boardItem, UR_NEW ) );
}
if( !( changeFlags & CHT_DONE ) )
board->Add( boardItem ); // handles connectivity
}
else
{
// modules inside modules are not supported yet
wxASSERT( boardItem->Type() != PCB_MODULE_T );
boardItem->SetParent( board->m_Modules.GetFirst() );
if( !( changeFlags & CHT_DONE ) )
board->m_Modules->Add( boardItem );
}
view->Add( boardItem );
break;
}
case CHT_REMOVE:
{
if( !m_editModules && aCreateUndoEntry )
undoList.PushItem( ITEM_PICKER( boardItem, UR_DELETED ) );
switch( boardItem->Type() )
{
// Module items
case PCB_PAD_T:
case PCB_MODULE_EDGE_T:
case PCB_MODULE_TEXT_T:
// This level can only handle module items when editing modules
if( !m_editModules )
break;
if( boardItem->Type() == PCB_MODULE_TEXT_T )
{
TEXTE_MODULE* text = static_cast<TEXTE_MODULE*>( boardItem );
// don't allow deletion of Reference or Value
if( text->GetType() != TEXTE_MODULE::TEXT_is_DIVERS )
break;
}
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
{
MODULE* module = static_cast<MODULE*>( boardItem->GetParent() );
wxASSERT( module && module->Type() == PCB_MODULE_T );
module->Delete( boardItem );
}
board->m_Status_Pcb = 0; // it is done in the legacy view (ratsnest perhaps?)
break;
// Board items
case PCB_LINE_T: // a segment not on copper layers
case PCB_TEXT_T: // a text on a layer
case PCB_TRACE_T: // a track segment (segment on a copper layer)
case PCB_VIA_T: // a via (like track segment on a copper layer)
case PCB_DIMENSION_T: // a dimension (graphic item)
case PCB_TARGET_T: // a target (graphic item)
case PCB_MARKER_T: // a marker used to show something
case PCB_ZONE_AREA_T:
itemsToDeselect.push_back( boardItem );
view->Remove( boardItem );
if( !( changeFlags & CHT_DONE ) )
board->Remove( boardItem );
break;
case PCB_MODULE_T:
{
itemsToDeselect.push_back( boardItem );
// There are no modules inside a module yet
wxASSERT( !m_editModules );
MODULE* module = static_cast<MODULE*>( boardItem );
view->Remove( module );
module->ClearFlags();
if( !( changeFlags & CHT_DONE ) )
board->Remove( module ); // handles connectivity
// Clear flags to indicate, that the ratsnest, list of nets & pads are not valid anymore
board->m_Status_Pcb = 0;
}
break;
default: // other types do not need to (or should not) be handled
wxASSERT( false );
break;
}
break;
}
case CHT_MODIFY:
{
if( !m_editModules && aCreateUndoEntry )
{
ITEM_PICKER itemWrapper( boardItem, UR_CHANGED );
wxASSERT( ent.m_copy );
itemWrapper.SetLink( ent.m_copy );
undoList.PushItem( itemWrapper );
}
if( ent.m_copy )
connectivity->MarkItemNetAsDirty( static_cast<BOARD_ITEM*>( ent.m_copy ) );
connectivity->Update( boardItem );
view->Update( boardItem );
// if no undo entry is needed, the copy would create a memory leak
if( !aCreateUndoEntry )
delete ent.m_copy;
break;
}
default:
wxASSERT( false );
break;
}
}
// Removing an item should trigger the unselect action
// but only after all items are removed otherwise we can get
// flickering depending on the system
if( itemsToDeselect.size() > 0 )
m_toolMgr->RunAction( PCB_ACTIONS::unselectItems, true, &itemsToDeselect );
if( !m_editModules && aCreateUndoEntry )
frame->SaveCopyInUndoList( undoList, UR_UNSPECIFIED );
if( TOOL_MANAGER* toolMgr = frame->GetToolManager() )
toolMgr->PostEvent( { TC_MESSAGE, TA_MODEL_CHANGE, AS_GLOBAL } );
if ( !m_editModules )
{
auto panel = static_cast<PCB_DRAW_PANEL_GAL*>( frame->GetGalCanvas() );
connectivity->RecalculateRatsnest();
connectivity->ClearDynamicRatsnest();
panel->RedrawRatsnest();
}
if( aSetDirtyBit )
frame->OnModify();
frame->UpdateMsgPanel();
clear();
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_APPLY_PAD_SETTINGS:
case ID_POPUP_PCB_COPY_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
{
wxString library = SelectLibrary( GetCurrentLib() );
if( library.size() )
{
Prj().SetRString( PROJECT::PCB_LIB_NICKNAME, library );
updateTitle();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
// On Windows, Raise() does not bring the window on screen, when iconized
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
if( !Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = CreateNewModule( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
updateView();
m_canvas->Refresh();
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
if( GetScreen()->IsModify() && !GetBoard()->IsEmpty() )
{
if( !IsOK( this,
_( "Current Footprint will be lost and this operation cannot be undone. Continue ?" ) ) )
break;
}
FOOTPRINT_WIZARD_FRAME* wizard = (FOOTPRINT_WIZARD_FRAME*) Kiway().Player(
FRAME_PCB_FOOTPRINT_WIZARD_MODAL, true, this );
if( wizard->ShowModal( NULL, this ) )
{
// Creates the new footprint from python script wizard
MODULE* module = wizard->GetBuiltFootprint();
if( module == NULL ) // i.e. if create module command aborted
break;
Clear_Pcb( false );
SetCrossHairPosition( wxPoint( 0, 0 ) );
// Add the new object to board
GetBoard()->Add( module, ADD_APPEND );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
module->SetPosition( wxPoint( 0, 0 ) );
module->ClearFlags();
Zoom_Automatique( false );
updateView();
m_canvas->Refresh();
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
GetScreen()->ClrModify();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && GetCurrentLib().size() )
{
SaveFootprintInLibrary( GetCurrentLib(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
wxMessageBox( _("No board currently edited" ) );
break;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
m_toolManager->RunAction( PCB_ACTIONS::selectionClear, true );
pcbframe->GetToolManager()->RunAction( PCB_ACTIONS::selectionClear, true );
BOARD_COMMIT commit( pcbframe );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
pcbframe->Exchange_Module( source_module, newmodule, commit );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
commit.Push( wxT( "Update module" ) );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
commit.Add( newmodule );
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
commit.Push( wxT( "Insert module" ) );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
// @todo LEGACY should be unnecessary
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
m_canvas->Refresh();
{
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
}
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
wxLogDebug( wxT( "Loading module from library " ) + getLibPath() );
if( ! Clear_Pcb( true ) )
break;
SetCrossHairPosition( wxPoint( 0, 0 ) );
LoadModuleFromLibrary( GetCurrentLib(), Prj().PcbFootprintLibs(), true );
if( GetBoard() && GetBoard()->m_Modules )
{
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
TEXTE_MODULE* ref = &GetBoard()->m_Modules->Reference();
TEXTE_MODULE* val = &GetBoard()->m_Modules->Value();
if( val && ref )
{
ref->SetType( TEXTE_MODULE::TEXT_is_REFERENCE ); // just in case ...
if( ref->GetLength() == 0 )
ref->SetText( wxT( "Ref**" ) );
val->SetType( TEXTE_MODULE::TEXT_is_VALUE ); // just in case ...
if( val->GetLength() == 0 )
val->SetText( wxT( "Val**" ) );
}
}
Zoom_Automatique( false );
{
EDA_3D_VIEWER* draw3DFrame = Get3DViewerFrame();
if( draw3DFrame )
draw3DFrame->NewDisplay();
}
GetScreen()->ClrModify();
updateView();
m_canvas->Refresh();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
// Currently: not implemented
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DUPLICATE_ITEM:
duplicateItems( false );
break;
case ID_POPUP_PCB_DUPLICATE_ITEM_AND_INCREMENT:
duplicateItems( true );
break;
case ID_POPUP_PCB_MOVE_EXACT:
moveExact();
break;
case ID_POPUP_PCB_CREATE_ARRAY:
createArray();
break;
case ID_POPUP_PCB_APPLY_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
DeleteTextModule( static_cast<TEXTE_MODULE*>( GetScreen()->GetCurItem() ) );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( static_cast<EDGE_MODULE*>( GetScreen()->GetCurItem() ), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
case ID_MODEDIT_MODULE_MOVE_EXACT:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_CHANGED );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
m_canvas->Refresh();
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MOVE_BLOCK_EXACT:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE_EXACT );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_GEN_IMPORT_DXF_FILE:
if( GetBoard()->m_Modules )
{
InvokeDXFDialogModuleImport( this, GetBoard()->m_Modules );
m_canvas->Refresh();
}
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
}
bool FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard( bool aAddNew )
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) Kiway().Player( FRAME_PCB, false );
if( pcbframe == NULL ) // happens when the board editor is not active (or closed)
{
DisplayErrorMessage( this, _("No board currently open." ) );
return false;
}
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->GetLink() ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = source_module->Next() )
{
if( module_in_edit->GetLink() == source_module->GetTimeStamp() )
break;
}
}
if( !aAddNew && source_module == NULL ) // source not found
{
DisplayError( this, _( "Unable to find the footprint on the main board.\nCannot save." ) );
return false;
}
if( aAddNew && source_module != NULL )
{
DisplayError( this, _( "Footprint already exists on board." ) );
return false;
}
m_toolManager->RunAction( PCB_ACTIONS::selectionClear, true );
pcbframe->GetToolManager()->RunAction( PCB_ACTIONS::selectionClear, true );
BOARD_COMMIT commit( pcbframe );
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->SetLink( 0 );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
pcbframe->Exchange_Module( source_module, newmodule, commit );
newmodule->SetTimeStamp( module_in_edit->GetLink() );
commit.Push( wxT( "Update module" ) );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetCrossHairPosition();
commit.Add( newmodule );
pcbframe->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
newmodule->SetPosition( wxPoint( 0, 0 ) );
pcbframe->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
commit.Push( wxT( "Insert module" ) );
}
newmodule->ClearFlags();
pcbframe->SetCurItem( NULL );
// @todo LEGACY should be unnecessary
mainpcb->m_Status_Pcb = 0;
return true;
}
