bool BOARD_NETLIST_UPDATER::testConnectivity( NETLIST& aNetlist )
{
// Last step: Some tests:
// verify all pads found in netlist:
// They should exist in footprints, otherwise the footprint is wrong
// note also references or time stamps are updated, so we use only
// the reference to find a footprint
//
// Also verify if zones have acceptable nets, i.e. nets with pads.
// Zone with no pad belongs to a "dead" net which happens after changes in schematic
// when no more pad use this net name.
wxString msg;
wxString padname;
for( int i = 0; i < (int) aNetlist.GetCount(); i++ )
{
const COMPONENT* component = aNetlist.GetComponent( i );
MODULE* footprint = m_board->FindModuleByReference( component->GetReference() );
if( footprint == NULL ) // It can be missing in partial designs
continue;
// Explore all pins/pads in component
for( unsigned jj = 0; jj < component->GetNetCount(); jj++ )
{
COMPONENT_NET net = component->GetNet( jj );
padname = net.GetPinName();
if( footprint->FindPadByName( padname ) )
continue; // OK, pad found
// not found: bad footprint, report error
msg.Printf( _( "Component %s pad %s not found in footprint %s\n" ),
GetChars( component->GetReference() ),
GetChars( padname ),
GetChars( footprint->GetFPID().Format() ) );
m_reporter->Report( msg, REPORTER::RPT_ERROR );
++m_errorCount;
}
}
// Test copper zones to detect "dead" nets (nets without any pad):
for( int i = 0; i < m_board->GetAreaCount(); i++ )
{
ZONE_CONTAINER* zone = m_board->GetArea( i );
if( !zone->IsOnCopperLayer() || zone->GetIsKeepout() )
continue;
int nc = zone->GetNet()->GetNodesCount();
if( nc == 0 )
{
msg.Printf( _( "Copper zone (net name %s): net has no pads connected." ),
GetChars( zone->GetNet()->GetNetname() ) );
m_reporter->Report( msg, REPORTER::RPT_WARNING );
++m_warningCount;
}
}
return true;
}
/* Execute a remote command send by Eeschema via a socket,
* port KICAD_PCB_PORT_SERVICE_NUMBER
* cmdline = received command from Eeschema
* Commands are
* $PART: "reference" put cursor on component
* $PIN: "pin name" $PART: "reference" put cursor on the footprint pin
*/
void PCB_EDIT_FRAME::ExecuteRemoteCommand( const char* cmdline )
{
char line[1024];
wxString msg;
wxString modName;
char* idcmd;
char* text;
MODULE* module = 0;
BOARD* pcb = GetBoard();
wxPoint pos;
strncpy( line, cmdline, sizeof(line) - 1 );
idcmd = strtok( line, " \n\r" );
text = strtok( NULL, " \n\r" );
if( !idcmd || !text )
return;
if( strcmp( idcmd, "$PART:" ) == 0 )
{
modName = FROM_UTF8( text );
module = pcb->FindModuleByReference( modName );
if( module )
msg.Printf( _( "%s found" ), GetChars( modName ) );
else
msg.Printf( _( "%s not found" ), GetChars( modName ) );
SetStatusText( msg );
if( module )
pos = module->GetPosition();
}
else if( strcmp( idcmd, "$PIN:" ) == 0 )
{
wxString pinName;
D_PAD* pad = NULL;
int netcode = -1;
pinName = FROM_UTF8( text );
text = strtok( NULL, " \n\r" );
if( text && strcmp( text, "$PART:" ) == 0 )
text = strtok( NULL, "\n\r" );
modName = FROM_UTF8( text );
module = pcb->FindModuleByReference( modName );
if( module )
pad = module->FindPadByName( pinName );
if( pad )
{
netcode = pad->GetNetCode();
// put cursor on the pad:
pos = pad->GetPosition();
}
if( netcode > 0 ) // highlight the pad net
{
pcb->HighLightON();
pcb->SetHighLightNet( netcode );
}
else
{
pcb->HighLightOFF();
pcb->SetHighLightNet( -1 );
}
if( module == NULL )
{
msg.Printf( _( "%s not found" ), GetChars( modName ) );
}
else if( pad == NULL )
{
msg.Printf( _( "%s pin %s not found" ), GetChars( modName ), GetChars( pinName ) );
SetCurItem( module );
}
else
{
msg.Printf( _( "%s pin %s found" ), GetChars( modName ), GetChars( pinName ) );
SetCurItem( pad );
}
SetStatusText( msg );
}
if( module ) // if found, center the module on screen, and redraw the screen.
{
SetCrossHairPosition( pos );
RedrawScreen( pos, false );
}
}
