Exemplo n.º 1
0
QT_BEGIN_NAMESPACE

QQuickItem *QQuickTextUtil::createCursor(
    QQmlComponent *component, QQuickItem *parent, const QRectF &rectangle, const char *className)
{
    QQuickItem *item = 0;
    if (component->isReady()) {
        QQmlContext *creationContext = component->creationContext();

        if (QObject *object = component->beginCreate(creationContext
                              ? creationContext
                              : qmlContext(parent))) {
            if ((item = qobject_cast<QQuickItem *>(object))) {
                QQml_setParent_noEvent(item, parent);
                item->setParentItem(parent);
                item->setPosition(rectangle.topLeft());
                item->setHeight(rectangle.height());
            } else {
                qmlInfo(parent) << tr("%1 does not support loading non-visual cursor delegates.")
                                .arg(QString::fromUtf8(className));
            }
            component->completeCreate();
            return item;
        }
    } else if (component->isLoading()) {
        QObject::connect(component, SIGNAL(statusChanged(QQmlComponent::Status)),
                         parent, SLOT(createCursor()), Qt::UniqueConnection);
        return item;
    }
    qmlInfo(parent, component->errors()) << tr("Could not load cursor delegate");
    return item;
}
Exemplo n.º 2
0
void QQuickLoaderPrivate::setInitialState(QObject *obj)
{
    Q_Q(QQuickLoader);

    QQuickItem *item = qmlobject_cast<QQuickItem*>(obj);
    if (item) {
        // If the item doesn't have an explicit size, but the Loader
        // does, then set the item's size now before bindings are
        // evaluated, otherwise we will end up resizing the item
        // later and triggering any affected bindings/anchors.
        if (widthValid && !QQuickItemPrivate::get(item)->widthValid)
            item->setWidth(q->width());
        if (heightValid && !QQuickItemPrivate::get(item)->heightValid)
            item->setHeight(q->height());
        item->setParentItem(q);
    }
    if (obj) {
        QQml_setParent_noEvent(itemContext, obj);
        QQml_setParent_noEvent(obj, q);
        itemContext = 0;
    }

    if (initialPropertyValues.isUndefined())
        return;

    QQmlComponentPrivate *d = QQmlComponentPrivate::get(component);
    Q_ASSERT(d && d->engine);
    QV4::ExecutionEngine *v4 = qmlGlobalForIpv.engine();
    Q_ASSERT(v4);
    QV4::Scope scope(v4);
    QV4::ScopedValue ipv(scope, initialPropertyValues.value());
    d->initializeObjectWithInitialProperties(qmlGlobalForIpv, ipv, obj);
}
Exemplo n.º 3
0
QQuickItem * DataSetView::createColumnHeader(int col)
{
	//std::cout << "createColumnHeader("<<col<<") called!\n" << std::flush;


	if(_columnHeaderDelegate == NULL)
	{
		_columnHeaderDelegate = new QQmlComponent(qmlEngine(this));
		_columnHeaderDelegate->setData("import QtQuick 2.10\nItem {\n"
			"property alias text: tekst.text\n"
		   "Rectangle	{ color: \"lightGrey\";	anchors.fill: parent }\n"
		   "Text		{ id: tekst; anchors.centerIn: parent }\n"
		"}", QUrl());
	}

	QQuickItem * columnHeader = NULL;

	if(_columnHeaderItems.count(col) == 0  || _columnHeaderItems[col] == NULL)
	{

		if(_columnHeaderStorage.size() > 0)
		{
#ifdef DEBUG_VIEWPORT
			std::cout << "createColumnHeader("<<col<<") from storage!\n" << std::flush;
#endif
			columnHeader = _columnHeaderStorage.top();
			_columnHeaderStorage.pop();
		}
		else
		{
#ifdef DEBUG_VIEWPORT
			std::cout << "createColumnHeader("<<col<<") ex nihilo!\n" << std::flush;
#endif
			columnHeader = qobject_cast<QQuickItem*>(_columnHeaderDelegate->create());
			columnHeader->setParent(this);
			columnHeader->setParentItem(this);
		}

		columnHeader->setProperty("z", 10);
		columnHeader->setProperty("text", _model->headerData(col, Qt::Orientation::Horizontal).toString());

		columnHeader->setZ(-3);
		columnHeader->setHeight(_dataRowsMaxHeight);
		columnHeader->setWidth(_dataColsMaxWidth[col]);

		columnHeader->setVisible(true);

		_columnHeaderItems[col] = columnHeader;
	}
	else
		columnHeader = _columnHeaderItems[col];

	columnHeader->setX(_colXPositions[col]);
	columnHeader->setY(_viewportY);

	return columnHeader;
}
Exemplo n.º 4
0
QQuickItem * DataSetView::createRowNumber(int row)
{
	//std::cout << "createRowNumber("<<row<<") called!\n" << std::flush;


	if(_rowNumberDelegate == NULL)
	{
		_rowNumberDelegate = new QQmlComponent(qmlEngine(this));
		_rowNumberDelegate->setData("import QtQuick 2.10\nItem {\n"
			"property alias text: tekst.text\n"
			"Rectangle	{ color: \"lightGrey\";	anchors.fill: parent }\n"
			"Text		{ id: tekst; anchors.centerIn: parent }\n"
		"}", QUrl());
	}

	QQuickItem * rowNumber = NULL;

	if(_rowNumberItems.count(row) == 0  || _rowNumberItems[row] == NULL)
	{

		if(_rowNumberStorage.size() > 0)
		{
#ifdef DEBUG_VIEWPORT
			std::cout << "createRowNumber("<<row<<") from storage!\n" << std::flush;
#endif
			rowNumber = _rowNumberStorage.top();
			_rowNumberStorage.pop();
		}
		else
		{
#ifdef DEBUG_VIEWPORT
			std::cout << "createRowNumber("<<row<<") ex nihilo!\n" << std::flush;
#endif
			rowNumber = qobject_cast<QQuickItem*>(_rowNumberDelegate->create());
			rowNumber->setParent(this);
			rowNumber->setParentItem(this);
		}

		rowNumber->setProperty("z", 10);
		rowNumber->setProperty("text", QString::fromStdString(std::to_string(row + 1))); //Nobody wants zero-based rows...

		rowNumber->setY(_dataRowsMaxHeight * (1 + row));
		rowNumber->setZ(-3);
		rowNumber->setHeight(_dataRowsMaxHeight);
		rowNumber->setWidth(_rowNumberMaxWidth);

		rowNumber->setVisible(true);

		_rowNumberItems[row] = rowNumber;
	}
	else
		rowNumber = _rowNumberItems[row];

	rowNumber->setX(_viewportX);

	return _rowNumberItems[row];
}
void QQuickStretchColumnContainer::updatePolish (void) {
    const QList<QQuickItem *> childrenList = childItems ();
    /// find items and stretchers
    qreal tmpW = 0;
    qreal tmpH = 0;
    int nbItems   = 0;
    int nbStretch = 0;
    for (QList<QQuickItem *>::const_iterator it = childrenList.constBegin (); it != childrenList.constEnd (); it++) {
        QQuickItem * child = (* it);
        if (child != Q_NULLPTR && !child->inherits ("QQuickRepeater") && child->isVisible ()) {
            if (child->implicitWidth () > tmpW) {
                tmpW = child->implicitWidth ();
            }
            if (child->implicitHeight () >= 0) {
                tmpH += child->implicitHeight ();
            }
            else {
                nbStretch++;
            }
            nbItems++;
        }
    }
    /// resize layout
    if (nbItems > 1) {
        tmpH += (m_spacing * (nbItems -1));
    }
    setImplicitWidth  (tmpW);
    setImplicitHeight (tmpH);
    const qreal layoutWidth  = width  ();
    const qreal layoutHeight = height ();
    const qreal autoSize = (nbStretch > 0 ? (layoutHeight - tmpH) / qreal (nbStretch) : 0);
    /// position children
    int currY = 0;
    for (QList<QQuickItem *>::const_iterator it = childrenList.constBegin (); it != childrenList.constEnd (); it++) {
        QQuickItem * child = (* it);
        if (child != Q_NULLPTR && !child->inherits ("QQuickRepeater") && child->isVisible ()) {
            if (currY) {
                currY += m_spacing;
            }
            child->setY (currY);
            child->setWidth (layoutWidth);
            child->setHeight (child->implicitHeight () >= 0 ? child->implicitHeight () : autoSize);
            currY += child->height ();
        }
    }
}
Exemplo n.º 6
0
void TestSimpleQmlLoad::compileAndLoadBinding1()
{
    QQmlEngine *engine = new QQmlEngine;
    const QString TEST_FILE(":/testqml/testbinding1.qml");
    QQmlComponent* component = compileAndLoad(engine, TEST_FILE);
    QVERIFY(component);
    QObject* myObject = component->create();
    QVERIFY(myObject);
    QQuickItem *item = qobject_cast<QQuickItem*>(myObject);
    int height = item->height();
    QVERIFY(height == 62);

    QList<QQuickItem *> childs = item->childItems();
    QVERIFY(childs.count() == 1);
    QQuickItem *child = childs[0];
    QVERIFY(child->height() == 62);

    item->setHeight(2);
    QVERIFY(child->height() == 2);
    delete component;
    delete engine;
}
void StretchRow::layoutChildrenWithDefaultSize() {
	//static int count = 0;
	//qDebug() << "Row Default Size" << ++count;
	Q_ASSERT(m_defaultSize != 0);

	const QList<QQuickItem *> childrenList = childItems();
	if (childrenList.isEmpty()) return;

    const int layoutHeight = height();
	qreal currX = m_leftMargin;
    for (QList<QQuickItem *>::const_iterator it = childrenList.constBegin(); it != childrenList.constEnd(); ++it) {
		QQuickItem* child = (*it);
		if (child == Q_NULLPTR || !child->isVisible()) {
			continue;
		}

		// add spacing if it is not the first item:
		if (currX > 0) {
			currX += m_spacing;
		}
		if (currX != child->x()) child->setX(currX);
		// check if item has a stretch proportion set:
		if (child->implicitWidth() < 0) {
			// yes -> set it to default size:
			qreal newWidth = m_defaultSize * child->implicitWidth() * -1;
			if (newWidth != child->width()) child->setWidth(newWidth);
		}
		// set height of all items to fill the layout:
		if (layoutHeight != child->height()) child->setHeight(layoutHeight);
		currX += child->width();
	}
	currX += m_rightMargin;

	// set implicit size to fit all items:
	if (currX != implicitWidth()) setImplicitWidth(currX);
}
void StretchColumn::layoutChildrenWithDefaultSize() {
	//static int count = 0;
	//qDebug() << "Column Default Size" << ++count;
    Q_ASSERT(m_defaultSize != 0);

	const QList<QQuickItem *> childrenList = childItems();
	if (childrenList.isEmpty()) return;

    const int contentWidth = width() - m_leftMargin - m_rightMargin;
    qreal currY = 0;
    for (QList<QQuickItem *>::const_iterator it = childrenList.constBegin(); it != childrenList.constEnd(); ++it) {
		QQuickItem* child = (*it);
		if (child == Q_NULLPTR || !child->isVisible()) {
			continue;
		}

		// add spacing if it is not the first item:
		if (currY > 0) {
			currY += m_spacing;
		}
		if (currY != child->y()) child->setY(currY);
		// check if item has a stretch proportion set:
		if (child->implicitHeight() < 0) {
			// yes -> set it to default size multiplied by relative size:
            qreal newHeight = m_defaultSize * child->implicitHeight() * -1;
            if (newHeight != child->height()) child->setHeight(newHeight);
		}
		// set width of all items to fill the layout:
        if (m_leftMargin != child->x()) child->setX(m_leftMargin);
		if (contentWidth != child->width()) child->setWidth(contentWidth);
		currY += child->height();
	}

	// set implicit size to fit all items:
	if (currY != implicitHeight()) setImplicitHeight(currY);
}
Exemplo n.º 9
0
void tst_qquickwidget::resizemodeitem()
{
    QWidget window;
    window.setGeometry(0, 0, 400, 400);

    QScopedPointer<QQuickWidget> view(new QQuickWidget);
    view->setParent(&window);
    view->setResizeMode(QQuickWidget::SizeRootObjectToView);
    QCOMPARE(QSize(0,0), view->initialSize());
    view->setSource(testFileUrl("resizemodeitem.qml"));
    QQuickItem* item = qobject_cast<QQuickItem*>(view->rootObject());
    QVERIFY(item);
    window.show();

    view->showNormal();
    // initial size from root object
    QCOMPARE(item->width(), 200.0);
    QCOMPARE(item->height(), 200.0);
    QCOMPARE(view->size(), QSize(200, 200));
    QCOMPARE(view->size(), view->sizeHint());
    QCOMPARE(view->size(), view->initialSize());

    // size update from view
    view->resize(QSize(80,100));

    QTRY_COMPARE(item->width(), 80.0);
    QCOMPARE(item->height(), 100.0);
    QCOMPARE(view->size(), QSize(80, 100));
    QCOMPARE(view->size(), view->sizeHint());

    view->setResizeMode(QQuickWidget::SizeViewToRootObject);

    // size update from view disabled
    view->resize(QSize(60,80));
    QCOMPARE(item->width(), 80.0);
    QCOMPARE(item->height(), 100.0);
    QTRY_COMPARE(view->size(), QSize(60, 80));

    // size update from root object
    item->setWidth(250);
    item->setHeight(350);
    QCOMPARE(item->width(), 250.0);
    QCOMPARE(item->height(), 350.0);
    QTRY_COMPARE(view->size(), QSize(250, 350));
    QCOMPARE(view->size(), QSize(250, 350));
    QCOMPARE(view->size(), view->sizeHint());

    // reset window
    window.hide();
    view.reset(new QQuickWidget(&window));
    view->setResizeMode(QQuickWidget::SizeViewToRootObject);
    view->setSource(testFileUrl("resizemodeitem.qml"));
    item = qobject_cast<QQuickItem*>(view->rootObject());
    QVERIFY(item);
    window.show();

    view->showNormal();

    // initial size for root object
    QCOMPARE(item->width(), 200.0);
    QCOMPARE(item->height(), 200.0);
    QCOMPARE(view->size(), view->sizeHint());
    QCOMPARE(view->size(), view->initialSize());

    // size update from root object
    item->setWidth(80);
    item->setHeight(100);
    QCOMPARE(item->width(), 80.0);
    QCOMPARE(item->height(), 100.0);
    QTRY_COMPARE(view->size(), QSize(80, 100));
    QCOMPARE(view->size(), view->sizeHint());

    // size update from root object disabled
    view->setResizeMode(QQuickWidget::SizeRootObjectToView);
    item->setWidth(60);
    item->setHeight(80);
    QCOMPARE(view->width(), 80);
    QCOMPARE(view->height(), 100);
    QCOMPARE(QSize(item->width(), item->height()), view->sizeHint());

    // size update from view
    view->resize(QSize(200,300));
    QTRY_COMPARE(item->width(), 200.0);
    QCOMPARE(item->height(), 300.0);
    QCOMPARE(view->size(), QSize(200, 300));
    QCOMPARE(view->size(), view->sizeHint());

    window.hide();

    // if we set a specific size for the view then it should keep that size
    // for SizeRootObjectToView mode.
    view.reset(new QQuickWidget(&window));
    view->resize(300, 300);
    view->setResizeMode(QQuickWidget::SizeRootObjectToView);
    QCOMPARE(QSize(0,0), view->initialSize());
    view->setSource(testFileUrl("resizemodeitem.qml"));
    view->resize(300, 300);
    item = qobject_cast<QQuickItem*>(view->rootObject());
    QVERIFY(item);
    window.show();

    view->showNormal();

    // initial size from root object
    QCOMPARE(item->width(), 300.0);
    QCOMPARE(item->height(), 300.0);
    QTRY_COMPARE(view->size(), QSize(300, 300));
    QCOMPARE(view->size(), view->sizeHint());
    QCOMPARE(view->initialSize(), QSize(200, 200)); // initial object size
}
void StretchRow::layoutChildrenWithProportions() {
	//static int count = 0;
	//qDebug() << "Row Proportions" << ++count;
	const QList<QQuickItem*> childrenList = childItems();
	if (childrenList.isEmpty()) return;
	if (width() <= 0) return;
	int visibleItems = 0;
    qreal availableForStretch = width() - m_leftMargin - m_rightMargin;
	qreal sumStretchProportions = 0.0;

	// iterate over all children and calculate available size to stretch items:
    for (QList<QQuickItem *>::const_iterator it = childrenList.constBegin(); it != childrenList.constEnd(); ++it) {
		QQuickItem* child = (*it);
		if (child == Q_NULLPTR || !child->isVisible()) {
			continue;
		}

		if (child->implicitWidth() >= 0) {
			// no stretch proportion set -> leave size and remove it from available space:
			availableForStretch -= child->width();
		} else {
			// a stretch proportion is set -> add it to sum:
			sumStretchProportions += (child->implicitWidth() * -1);
		}
		visibleItems++;
	}
	// remove spacing from available space:
	availableForStretch -= m_spacing * (visibleItems - 1);

    const int layoutHeight = height();
    QPointer<QQuickItem> lastStretchItem = nullptr;
    qreal currX = m_leftMargin;
    for (QList<QQuickItem *>::const_iterator it = childrenList.constBegin(); it != childrenList.constEnd(); ++it) {
		QQuickItem* child = (*it);
		if (child == Q_NULLPTR || !child->isVisible()) {
			continue;
		}

		// add spacing if it is not the first item:
		if (currX > 0) {
			currX += m_spacing;
        }
        if (currX != child->x()) child->setX(currX);
		// check if item has a stretch proportion set (if not do nothing):
		if (child->implicitWidth() < 0) {
			// get the stretch proportion:
			qreal stretchProportion = (child->implicitWidth() * -1);
			// calculate the relation of the total space available for stretched items
			// that this item will use:
			// (sumStretchProportion can not be 0 (in divison) because if this "if" is executed,
			// there has been at least one item with a stretch proportion set)
			qreal relationOfSpaceAvailableForStretch = stretchProportion / sumStretchProportions;
            qreal newWidth = qRound(availableForStretch * relationOfSpaceAvailableForStretch);
            if (newWidth != child->width()) child->setWidth(newWidth);
			lastStretchItem = child;
		}
        // set height of all items to fill the layout:
        if (layoutHeight != child->height()) child->setHeight(layoutHeight);
		currX += child->width();
	}
	currX += m_rightMargin;

	// check if last item fills whole remaining space in this layout:
	// (can happen because of rounding mistakes)
	if (lastStretchItem) {
		double pxMissing = width() - currX;
        if (pxMissing > 0.0001) {
            // qInfo() << "StretchRow layout mismatch: " << pxMissing;
			// it does not -> adjust it:
			lastStretchItem->setWidth(lastStretchItem->width() + pxMissing);
		}
	}
}
Exemplo n.º 11
0
void QQuickComponentsLinearLayout::reconfigureLayout()
{
    if (!isComponentComplete())
        return;

    const int count = m_items.count();

    if (count == 0)
        return;

    qreal totalSpacing = 0;
    qreal totalSizeHint = 0;
    qreal totalMinimumSize = 0;
    qreal totalMaximumSize = 0;

    QVector<QQuickComponentsLayoutInfo> itemData;

    for (int i = 0; i < count; i++) {
        QQuickItem *item = m_items.at(i);
        QObject *attached = qmlAttachedPropertiesObject<QQuickComponentsLayout>(item);
        QQuickComponentsLayoutAttached *info = static_cast<QQuickComponentsLayoutAttached *>(attached);

        QQuickComponentsLayoutInfo data;

        if (m_orientation == Horizontal) {
            data.sizeHint = item->implicitWidth();
            data.minimumSize = info->minimumWidth();
            data.maximumSize = info->maximumWidth();
            data.expansive = (info->horizontalSizePolicy() == QQuickComponentsLayout::Expanding);
            data.stretch = info->horizontalSizePolicy() == Expanding ? 1.0 : 0;
        } else {
            data.sizeHint = item->implicitHeight();
            data.minimumSize = info->minimumHeight();
            data.maximumSize = info->maximumHeight();
            data.expansive = (info->verticalSizePolicy() == QQuickComponentsLayout::Expanding);
            data.stretch = info->verticalSizePolicy() == Expanding ? 1.0 : 0;
        }

        itemData.append(data);

        // sum
        totalSizeHint += data.sizeHint;
        totalMinimumSize += data.minimumSize;
        totalMaximumSize += data.maximumSize;

        // don't count last spacing
        if (i < count - 1)
            totalSpacing += data.spacing + m_spacing;
    }

    if (m_orientation == Horizontal) {
        qDeclarativeLayoutCalculate(itemData, 0, count, 0, width(), m_spacing);

        for (int i = 0; i < count; i++) {
            QQuickItem *item = m_items.at(i);
            const QQuickComponentsLayoutInfo &data = itemData.at(i);

            item->setX(data.pos);
            item->setY(height()/2 - item->height()/2);
            item->setWidth(data.size);
        }
    } else {
        qDeclarativeLayoutCalculate(itemData, 0, count, 0, height(), m_spacing);

        for (int i = 0; i < count; i++) {
            QQuickItem *item = m_items.at(i);
            const QQuickComponentsLayoutInfo &data = itemData.at(i);

            item->setY(data.pos);
            item->setX(width()/2 - item->width()/2);
            item->setHeight(data.size);
        }
    }

    // propagate hints to upper levels
    QObject *attached = qmlAttachedPropertiesObject<QQuickComponentsLayout>(this);
    QQuickComponentsLayoutAttached *info = static_cast<QQuickComponentsLayoutAttached *>(attached);

    if (m_orientation == Horizontal) {
        setImplicitWidth(totalSizeHint);
        info->setMinimumWidth(totalMinimumSize + totalSpacing);
        info->setMaximumWidth(totalMaximumSize + totalSpacing);
    } else {
        setImplicitHeight(totalSizeHint);
        info->setMinimumHeight(totalMinimumSize + totalSpacing);
        info->setMaximumHeight(totalMaximumSize + totalSpacing);
    }
}