Exemplo n.º 1
0
/// Normally in classes derived from PrefsPanel this function 
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);

   S.StartStatic(_("Key Bindings"), 1);
   {
      S.StartHorizontalLay(wxALIGN_CENTRE, false);
      {
         S.Id(CategoryID);
         mCat = S.AddChoice(_("C&ategory:"),
                            mCats[0],
                            &mCats);
      }
      S.EndHorizontalLay();
                                    
      mList = S.Id(CommandsListID).AddListControlReportMode();
      mList->SetName(_("Key Bindings"));

      S.StartThreeColumn();
      {
         if (!mKey) {
            mKey = new wxTextCtrl(this,
                                  CurrentComboID,
                                  wxT(""),
                                  wxDefaultPosition,
#if defined(__WXMAC__)                                  
                                  wxSize(300, -1));
#else
                                  wxSize(210, -1));
#endif
            mKey->Connect(wxEVT_KEY_DOWN,
                          wxKeyEventHandler(KeyConfigPrefs::OnCaptureKeyDown));
            mKey->Connect(wxEVT_CHAR,
                          wxKeyEventHandler(KeyConfigPrefs::OnCaptureChar));
         }
         S.AddWindow(mKey);

         /* i18n-hint: (verb)*/
         S.Id(SetButtonID).AddButton(_("Set"));
         S.Id(ClearButtonID).AddButton(_("Cl&ear"));
      }
      S.EndThreeColumn();

#if defined(__WXMAC__)
      S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif

      S.StartThreeColumn();
      {
         S.Id(ImportButtonID).AddButton(_("&Import..."));
         S.Id(ExportButtonID).AddButton(_("&Export..."));
         S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
      }
      S.EndThreeColumn();
   }
Exemplo n.º 2
0
void AudioIOPrefs::PopulateOrExchange( ShuttleGui & S )
{
   /// \todo
   /// JKC: I think setting paths in gPrefs is bad practice.
   /// Suppose we are using gPrefs from elsewhere at the same time?
   /// Change these all to full paths?
   gPrefs->SetPath(wxT("/AudioIO"));

   S.SetBorder( 2 );

   S.StartHorizontalLay(wxEXPAND, 0 );
   S.StartStatic( _("Playback"),1 );
   {
      S.StartMultiColumn(2, wxEXPAND);
      S.SetStretchyCol(1);
      S.TieChoice( _("Device") + wxString(wxT(":")), wxT("PlaybackDevice"), 
         wxT(""), mmPlayNames, mmPlayLabels );

      S.AddPrompt( _("Using:") );
      wxString ver = _("Portaudio v");
#if USE_PORTAUDIO_V19
      ver += wxT("19");
#else
      ver += wxT("18");
#endif
      S.AddFixedText( ver );
      S.EndMultiColumn();
   }                              
   S.EndStatic();
   S.StartStatic( _("Recording"), 1 );
   {
      S.StartMultiColumn(2, wxEXPAND);
      S.SetStretchyCol(1);
      S.TieChoice( _("Device") + wxString(wxT(":")), wxT("RecordingDevice"), 
         wxT(""), mmRecordNames, mmRecordLabels );
      S.TieChoice( _("Channels") + wxString(wxT(":")), wxT("RecordChannels"), 
         2, mmChannelNames, mmChannelLabels );
      S.EndMultiColumn();
   }
   S.EndStatic();
   S.EndHorizontalLay();
   S.StartStatic( _("Playthrough") );
   {
      S.TieCheckBox( _("&Play other tracks while recording new one"),
         wxT("Duplex"),true);
#ifdef __MACOSX__
      S.TieCheckBox( _("&Hardware Playthrough (Play new track while recording it)"),
         wxT("Playthrough"),false);
#endif
      S.TieCheckBox( _("&Software Playthrough (Play new track while recording it)"),
         wxT("SWPlaythrough"),false);
   }
   S.EndStatic();
   S.StartHorizontalLay( wxEXPAND, 0 );
   S.StartStatic( _("Cut Preview"),1 );
   {
      S.StartThreeColumn();
      S.TieTextBox( _("Play before cut region:"), wxT("CutPreviewBeforeLen"),1.0,9);
      S.AddUnits(  _("seconds") );
      S.TieTextBox( _("Play after cut region:"),wxT("CutPreviewAfterLen"), 1.0,9);
      S.AddUnits(  _("seconds") );
      S.EndThreeColumn();
   }
   S.EndStatic();
   S.StartStatic( _("Latency"),1 );
   {
      S.StartThreeColumn();
#if USE_PORTAUDIO_V19
      // only show the following controls if we use Portaudio v19, because
      // for Portaudio v19 we always use default buffer sizes
      S.TieTextBox( _("Audio to buffer:"),wxT("LatencyDuration"),100.0,9);
      S.AddUnits(  _("milliseconds") );
#endif
      S.TieTextBox( _("Latency correction:"),wxT("LatencyCorrection"),0.0,9);
      S.AddUnits(  _("milliseconds") );
      S.EndThreeColumn();
   }
   S.EndStatic();
   S.EndHorizontalLay();
   S.StartHorizontalLay( wxEXPAND, 0 );
   S.StartStatic( _("Seek Time"),1 );
   {
      S.StartThreeColumn();
      S.TieTextBox( _("Short period:"), wxT("SeekShortPeriod"),1.0,9);
      S.AddUnits(  _("seconds") );
      S.TieTextBox( _("Long period:"),wxT("SeekLongPeriod"), 15.0,9);
      S.AddUnits(  _("seconds") );
      S.EndThreeColumn();
   }
   S.EndStatic();
   S.StartStatic( _("Effects Preview"),1 );
   {
      S.StartThreeColumn();
      S.TieTextBox( _("Play when previewing:"), wxT("EffectsPreviewLen"), 3.0,9);
      S.AddUnits( _("seconds") );
      S.EndThreeColumn();
   }

   gPrefs->SetPath(wxT("/"));
}
Exemplo n.º 3
0
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);

   S.StartStatic(_("Key Bindings"), 1);
   {
      S.StartMultiColumn(3, wxEXPAND);
      {
         S.SetStretchyCol(1);

         S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
         {
            S.AddTitle(_("View by:"));
            S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
            {
               mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
               mViewByTree->SetName(_("View by tree"));
               mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
               mViewByName->SetName(_("View by name"));
               mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
               mViewByKey->SetName(_("View by key"));
            }
            S.EndRadioButtonGroup();
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
         {
            // just a spacer
         }
         S.EndHorizontalLay();

         S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
         {
            mFilterLabel = S.AddVariableText(_("Searc&h:"));

            if (!mFilter) {
               mFilter = safenew wxTextCtrl(this,
                                        FilterID,
                                        wxT(""),
                                        wxDefaultPosition,
#if defined(__WXMAC__)
                                        wxSize(300, -1),
#else
                                        wxSize(210, -1),
#endif
                                        wxTE_PROCESS_ENTER);
               mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
               mFilter->Connect(wxEVT_KEY_DOWN,
                                wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
                                NULL,
                                this);
               mFilter->Connect(wxEVT_CHAR,
                                wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
                                NULL,
                                this);
            }
            S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
         }
         S.EndHorizontalLay();
      }
      S.EndThreeColumn();
      S.AddSpace(-1, 2);

      S.StartHorizontalLay(wxEXPAND, 1);
      {
         if (!mView) {
            mView = safenew KeyView(this, CommandsListID);
            mView->SetName(_("Bindings"));
         }
         S.Prop(true);
         S.AddWindow(mView, wxEXPAND);
      }
      S.EndHorizontalLay();

      S.StartThreeColumn();
      {
         if (!mKey) {
            mKey = safenew wxTextCtrl(this,
                                  CurrentComboID,
                                  wxT(""),
                                  wxDefaultPosition,
#if defined(__WXMAC__)
                                  wxSize(300, -1),
#else
                                  wxSize(210, -1),
#endif
                                  wxTE_PROCESS_ENTER);

            mKey->SetName(_("Short cut"));
            mKey->Connect(wxEVT_KEY_DOWN,
                          wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
                          NULL,
                          this);
            mKey->Connect(wxEVT_CHAR,
                          wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
                          NULL,
                          this);
            mKey->Connect(wxEVT_KILL_FOCUS,
                          wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
                          NULL,
                          this);
         }
         S.AddWindow(mKey);

         /* i18n-hint: (verb)*/
         mSet = S.Id(SetButtonID).AddButton(_("&Set"));
         mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
      }
      S.EndThreeColumn();

#if defined(__WXMAC__)
      S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif

      S.StartThreeColumn();
      {
         S.Id(ImportButtonID).AddButton(_("&Import..."));
         S.Id(ExportButtonID).AddButton(_("&Export..."));
         S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
      }
      S.EndThreeColumn();
   }
   S.EndStatic();


   // Need to layout so that the KeyView is properly sized before populating.
   // Otherwise, the initial selection is not scrolled into view.
   Layout();
}
Exemplo n.º 4
0
void RecordingPrefs::PopulateOrExchange(ShuttleGui & S)
{
   wxTextCtrl *w;

   S.SetBorder(2);

   S.StartStatic(_("Playthrough"));
   {
      S.TieCheckBox(_("Overdub: &Play other tracks while recording new one"),
                    wxT("/AudioIO/Duplex"),
                    true);
#if defined(__WXMAC__)
      S.TieCheckBox(_("&Hardware Playthrough: Listen while recording or monitoring new track"),
                    wxT("/AudioIO/Playthrough"),
                    false);
#endif
      S.TieCheckBox(_("&Software Playthrough: Listen while recording or monitoring new track"),
                    wxT("/AudioIO/SWPlaythrough"),
                    false);
#if !defined(__WXMAC__)
      S.AddUnits(wxString(wxT("     ")) + _("(uncheck when recording \"stereo mix\")"));
#endif
   }
   S.EndStatic();

   S.StartStatic( _("Latency"));
   {
      S.StartThreeColumn();
      {
         // only show the following controls if we use Portaudio v19, because
         // for Portaudio v18 we always use default buffer sizes
         w = S.TieNumericTextBox(_("Audio to &buffer:"),
                                 wxT("/AudioIO/LatencyDuration"),
                                 DEFAULT_LATENCY_DURATION,
                                 9);
         S.AddUnits(_("milliseconds (higher = more latency)"));
         w->SetName(w->GetName() + wxT(" ") + _("milliseconds (higher = more latency)"));

         w = S.TieNumericTextBox(_("L&atency correction:"),
                                 wxT("/AudioIO/LatencyCorrection"),
                                 DEFAULT_LATENCY_CORRECTION,
                                 9);
         S.AddUnits(_("milliseconds (negative = backwards)"));
         w->SetName(w->GetName() + wxT(" ") + _("milliseconds (negative = backwards)"));
      }
      S.EndThreeColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Sound Activated Recording"));
   {
      S.TieCheckBox(_("Sound Activated &Recording"),
                    wxT("/AudioIO/SoundActivatedRecord"),
                    false);

      S.StartMultiColumn(2, wxEXPAND);
      {
         S.SetStretchyCol(1);

         int dBRange = gPrefs->Read(wxT("/GUI/EnvdBRange"), ENV_DB_RANGE);
         S.TieSlider(_("Sound Activation Le&vel (dB):"),
                     wxT("/AudioIO/SilenceLevel"),
                     -50,
                     0,
                     -dBRange);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   #ifdef AUTOMATED_INPUT_LEVEL_ADJUSTMENT
      S.StartStatic(_("AutomatedRecording Level Adjustment"));
      {
         S.TieCheckBox(_("Enable Automated Recordingt Level Adjustment."),
                       wxT("/AudioIO/AutomatedInputLevelAdjustment"),
                       false);

         S.StartMultiColumn(2, wxEXPAND);
         {
            S.SetStretchyCol(1);

            /* i18n-hint: Desired maximum (peak) volume for sound */
            S.TieSlider(_("Target Peak:"),
                        wxT("/AudioIO/TargetPeak"),
                        AILA_DEF_TARGET_PEAK,
                        100,
                        0);

            S.TieSlider(_("Within:"),
                     wxT("/AudioIO/DeltaPeakVolume"),
                     AILA_DEF_DELTA_PEAK,
                     100,
                     0);
         }
         S.EndMultiColumn();

         S.StartThreeColumn();
         {
            S.TieNumericTextBox(_("Analysis Time:"),
                                wxT("/AudioIO/AnalysisTime"),
                                AILA_DEF_ANALYSIS_TIME,
                                9);
            S.AddUnits(_("milliseconds (time of one analysis)"));

            S.TieNumericTextBox(_("Number of consecutive analysis:"),
                                wxT("/AudioIO/NumberAnalysis"),
                                AILA_DEF_NUMBER_ANALYSIS,
                                2);
            S.AddUnits(_("0 means endless"));
          }
          S.EndThreeColumn();
      }
      S.EndStatic();
   #endif
}