void FindClippingDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Leland Lucius"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.TieTextBox(_("Start threshold (samples):"),
mEffect->mStart,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
S.TieTextBox(_("Stop threshold (samples):"),
mEffect->mStop,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
/// Populates more complex dialog that has a chirp.
void ToneGenDialog::PopulateOrExchangeExtended( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
S.AddFixedText(wxT(""));
S.AddTitle( _("Start"));
S.AddTitle( _("End") );
S.TieTextBox( _("Frequency / Hz"),frequency[0], 10);
S.TieTextBox( wxT(""),frequency[1], 10);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 10);
S.TieTextBox( wxT(""),amplitude[1], 10);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.TieTextBox( _("Length (seconds)"),length, 10 );
}
S.EndMultiColumn();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
S.TieTextBox( _("Frequency / Hz"),frequency[0], 5);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 5);
S.TieTextBox( _("Length (seconds)"),length, 5 );
}
S.EndMultiColumn();
}
void FindClippingDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.TieTextBox(_("Start threshold (samples):"),
mEffect->mStart,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
S.TieTextBox(_("Stop threshold (samples):"),
mEffect->mStop,
10)->SetValidator(wxTextValidator(wxFILTER_NUMERIC));
}
S.EndMultiColumn();
}
/// Add a compound control made up from a choice and an edit
/// box.
void QualityPrefs::DefineSampleRateControl( ShuttleGui & S )
{
// We use a sizer within a sizer to get the effect we want.
// We also use the SetIfCreated idiom to get pointers to
// the controls, so that we can drive them from
// our own code.
S.SetBorder(2);
S.StartHorizontalLay(wxALIGN_LEFT );
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector( mmSampleRateNames.GetCount()-1 );
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id( ID_SAMPLE_RATE_CHOICE );
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice( wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mmSampleRateNames, mmSampleRateLabels );
// Now do the edit box...
mOtherSampleRate = S.TieTextBox(wxT(""),
mOtherSampleRateValue, 9);
S.EndHorizontalLay();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duration"), false);
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.TieChoice(_("Noise type"), nType, nTypeList);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieChoice(_("Noise type") + wxString(wxT(":")), nType, nTypeList);
S.TieTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("Choose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieTextBox(_("Minimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.TieTextBox(_("Amplitude (0-1)"), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
void TracksPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Update display while playing"),
wxT("/GUI/AutoScroll"),
true);
S.TieCheckBox(_("Automatically &fit tracks vertically zoomed"),
wxT("/GUI/TracksFitVerticallyZoomed"),
false);
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Default &view mode:"),
wxT("/GUI/DefaultViewModeNew"),
0,
mViewChoices,
mViewCodes);
S.SetSizeHints(mViewChoices);
S.TieTextBox(_("Default audio track &name:"),
wxT("/GUI/TrackNames/DefaultTrackName"),
_("Audio Track"),
30);
}
S.EndMultiColumn();
S.TieCheckBox(_("Sho&w audio track name as overlay"),
wxT("/GUI/ShowTrackNameInWaveform"),
false);
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Select all audio in project, if none selected"),
wxT("/GUI/SelectAllOnNone"),
true);
/* i18n-hint: cut-lines are a lines indicating where to cut.*/
S.TieCheckBox(_("Enable cu&t lines"),
wxT("/GUI/EnableCutLines"),
false);
S.TieCheckBox(_("Enable &dragging of left and right selection edges"),
wxT("/GUI/AdjustSelectionEdges"),
true);
S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
wxT("/GUI/CircularTrackNavigation"),
false);
S.TieCheckBox(_("Editing a clip can &move other clips"),
wxT("/GUI/EditClipCanMove"),
true);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
S.TieCheckBox(_("Enable scrolling left of &zero"),
wxT("/GUI/ScrollBeyondZero"),
false);
#endif
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Solo &Button:"),
wxT("/GUI/Solo"),
wxT("Standard"),
mSoloChoices,
mSoloCodes);
S.SetSizeHints(mSoloChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void AudioIOPrefs::PopulateOrExchange( ShuttleGui & S )
{
/// \todo
/// JKC: I think setting paths in gPrefs is bad practice.
/// Suppose we are using gPrefs from elsewhere at the same time?
/// Change these all to full paths?
gPrefs->SetPath(wxT("/AudioIO"));
S.SetBorder( 2 );
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("Playback"),1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("PlaybackDevice"),
wxT(""), mmPlayNames, mmPlayLabels );
S.AddPrompt( _("Using:") );
wxString ver = _("Portaudio v");
#if USE_PORTAUDIO_V19
ver += wxT("19");
#else
ver += wxT("18");
#endif
S.AddFixedText( ver );
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic( _("Recording"), 1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("RecordingDevice"),
wxT(""), mmRecordNames, mmRecordLabels );
S.TieChoice( _("Channels") + wxString(wxT(":")), wxT("RecordChannels"),
2, mmChannelNames, mmChannelLabels );
S.EndMultiColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartStatic( _("Playthrough") );
{
S.TieCheckBox( _("&Play other tracks while recording new one"),
wxT("Duplex"),true);
#ifdef __MACOSX__
S.TieCheckBox( _("&Hardware Playthrough (Play new track while recording it)"),
wxT("Playthrough"),false);
#endif
S.TieCheckBox( _("&Software Playthrough (Play new track while recording it)"),
wxT("SWPlaythrough"),false);
}
S.EndStatic();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Cut Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play before cut region:"), wxT("CutPreviewBeforeLen"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Play after cut region:"),wxT("CutPreviewAfterLen"), 1.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Latency"),1 );
{
S.StartThreeColumn();
#if USE_PORTAUDIO_V19
// only show the following controls if we use Portaudio v19, because
// for Portaudio v19 we always use default buffer sizes
S.TieTextBox( _("Audio to buffer:"),wxT("LatencyDuration"),100.0,9);
S.AddUnits( _("milliseconds") );
#endif
S.TieTextBox( _("Latency correction:"),wxT("LatencyCorrection"),0.0,9);
S.AddUnits( _("milliseconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Seek Time"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Short period:"), wxT("SeekShortPeriod"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Long period:"),wxT("SeekLongPeriod"), 15.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Effects Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play when previewing:"), wxT("EffectsPreviewLen"), 3.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
gPrefs->SetPath(wxT("/"));
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("FFT Window"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Window size") + wxString(wxT(":")),
wxT("/Spectrum/FFTSize"),
256,
mSizeChoices,
mSizeCodes);
S.SetSizeHints(mSizeChoices);
S.TieChoice(_("Window type") + wxString(wxT(":")),
wxT("/Spectrum/WindowType"),
3,
mTypeChoices,
mTypeCodes);
S.SetSizeHints(mTypeChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_FFT_SKIP_POINTS
wxArrayString wskipn;
wxArrayInt wskipv;
for (size_t i = 0; i < 7; i++) {
wskipn.Add(wxString::Format(wxT("%d"), (1 << i) - 1));
wskipv.Add((1 << i) - 1);
}
S.StartStatic(_("FFT Skip Points"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Skip Points") + wxString(wxT(":")),
wxT("/Spectrum/FFTSkipPoints"),
0,
wskipn,
wskipv);
S.SetSizeHints(wskipn);
}
S.EndMultiColumn();
}
S.EndStatic();
#endif //EXPERIMENTAL_FFT_SKIP_POINTS
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
mMinFreq =
S.TieTextBox(_("Minimum Frequency (Hz):"),
wxT("/Spectrum/MinFreq"),
0,
12);
mMaxFreq =
S.TieTextBox(_("Maximum Frequency (Hz):"),
wxT("/Spectrum/MaxFreq"),
8000,
12);
mGain =
S.TieTextBox(_("Gain (dB):"),
wxT("/Spectrum/Gain"),
20,
8);
mRange =
S.TieTextBox(_("Range (dB):"),
wxT("/Spectrum/Range"),
80,
8);
mFrequencyGain =
S.TieTextBox(_("Frequency gain: (dB/dec)"),
wxT("/Spectrum/FrequencyGain"),
0,
4);
}
S.EndTwoColumn();
S.TieCheckBox(_("Show the spectrum using &grayscale colors"),
wxT("/Spectrum/Grayscale"),
false);
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
wxT("/Spectrum/FFTYGrid"),
false);
#endif //EXPERIMENTAL_FFT_Y_GRID
}
S.EndStatic();
#ifdef EXPERIMENTAL_FIND_NOTES
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieTextBox(_("Minimum Amplitude (dB):"),
wxT("/Spectrum/FindNotesMinA"),
-30L,
8);
mFindNotesN =
S.TieTextBox(_("Max. Number of Notes (1..128):"),
wxT("/Spectrum/FindNotesN"),
5L,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
wxT("/Spectrum/FFTFindNotes"),
false);
S.TieCheckBox(_("&Quantize Notes"),
wxT("/Spectrum/FindNotesQuantize"),
false);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
}
void QualityPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Sampling"));
{
S.StartMultiColumn(2);
{
S.AddPrompt(_("Default Sample Rate:"));
S.StartMultiColumn(2);
{
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector(mSampleRateNames.GetCount() - 1);
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id(ID_SAMPLE_RATE_CHOICE);
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice(wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mSampleRateNames,
mSampleRateLabels);
S.SetSizeHints(mSampleRateNames);
// Now do the edit box...
mOtherSampleRate = S.TieTextBox(wxT(""),
mOtherSampleRateValue,
15);
}
S.EndHorizontalLay();
S.TieChoice(_("Default Sample Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample,
mSampleFormatNames,
mSampleFormatLabels);
S.SetSizeHints(mSampleFormatNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Real-time Conversion"));
{
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(2);
S.TieChoice(_("Sample Rate Converter:"),
Resample::GetFastMethodKey(),
Resample::GetFastMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("Dither"),
wxT("/Quality/DitherAlgorithm"),
Dither::none,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("High-quality Conversion"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Sample Rate Converter:"),
Resample::GetBestMethodKey(),
Resample::GetBestMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("Dither"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void RecordingPrefs::PopulateOrExchange(ShuttleGui & S)
{
wxTextCtrl *w;
S.SetBorder(2);
S.StartStatic(_("Playthrough"));
{
S.TieCheckBox(_("Overdub: &Play other tracks while recording new one"),
wxT("/AudioIO/Duplex"),
true);
#if defined(__WXMAC__)
S.TieCheckBox(_("&Hardware Playthrough: Listen while recording or monitoring new track"),
wxT("/AudioIO/Playthrough"),
false);
#endif
S.TieCheckBox(_("&Software Playthrough: Listen while recording or monitoring new track"),
wxT("/AudioIO/SWPlaythrough"),
false);
#if !defined(__WXMAC__)
S.AddUnits(wxString(wxT(" ")) + _("(uncheck when recording \"stereo mix\")"));
#endif
}
S.EndStatic();
S.StartStatic( _("Latency"));
{
S.StartThreeColumn();
{
// only show the following controls if we use Portaudio v19, because
// for Portaudio v18 we always use default buffer sizes
w = S.TieNumericTextBox(_("Audio to &buffer:"),
wxT("/AudioIO/LatencyDuration"),
DEFAULT_LATENCY_DURATION,
9);
S.AddUnits(_("milliseconds (higher = more latency)"));
w->SetName(w->GetName() + wxT(" ") + _("milliseconds (higher = more latency)"));
w = S.TieNumericTextBox(_("L&atency correction:"),
wxT("/AudioIO/LatencyCorrection"),
DEFAULT_LATENCY_CORRECTION,
9);
S.AddUnits(_("milliseconds (negative = backwards)"));
w->SetName(w->GetName() + wxT(" ") + _("milliseconds (negative = backwards)"));
}
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic(_("Sound Activated Recording"));
{
S.TieCheckBox(_("Sound Activated &Recording"),
wxT("/AudioIO/SoundActivatedRecord"),
false);
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
int dBRange = gPrefs->Read(ENV_DB_KEY, ENV_DB_RANGE);
S.TieSlider(_("Sound Activation Le&vel (dB):"),
wxT("/AudioIO/SilenceLevel"),
-50,
0,
-dBRange);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Naming newly recorded tracks"));
{
S.StartMultiColumn(3);
{
S.Id(UseCustomTrackNameID).TieCheckBox(_("Use Custom Track &Name"),
wxT("/GUI/TrackNames/RecordingNameCustom"),
mUseCustomTrackName ? true : false);
mToggleCustomName = S.TieTextBox(wxT(""),
wxT("/GUI/TrackNames/RecodingTrackName"),
_("Recorded_Audio"),
30);
mToggleCustomName->SetName(_("Custom name text"));
mToggleCustomName->Enable(mUseCustomTrackName);
}
S.EndMultiColumn();
S.TieCheckBox(_("Add &Track Number"),
wxT("/GUI/TrackNames/TrackNumber"),
false);
S.TieCheckBox(_("Add System &Date"),
wxT("/GUI/TrackNames/DateStamp"),
false);
S.TieCheckBox(_("Add System T&ime"),
wxT("/GUI/TrackNames/TimeStamp"),
false);
}
S.EndStatic();
#ifdef EXPERIMENTAL_AUTOMATED_INPUT_LEVEL_ADJUSTMENT
S.StartStatic(_("Automated Recording Level Adjustment"));
{
S.TieCheckBox(_("Enable Automated Recording Level Adjustment."),
wxT("/AudioIO/AutomatedInputLevelAdjustment"),
false);
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
/* i18n-hint: Desired maximum (peak) volume for sound */
S.TieSlider(_("Target Peak:"),
wxT("/AudioIO/TargetPeak"),
AILA_DEF_TARGET_PEAK,
100,
0);
S.TieSlider(_("Within:"),
wxT("/AudioIO/DeltaPeakVolume"),
AILA_DEF_DELTA_PEAK,
100,
0);
}
S.EndMultiColumn();
S.StartThreeColumn();
{
S.TieNumericTextBox(_("Analysis Time:"),
wxT("/AudioIO/AnalysisTime"),
AILA_DEF_ANALYSIS_TIME,
9);
S.AddUnits(_("milliseconds (time of one analysis)"));
S.TieNumericTextBox(_("Number of consecutive analysis:"),
wxT("/AudioIO/NumberAnalysis"),
AILA_DEF_NUMBER_ANALYSIS,
2);
S.AddUnits(_("0 means endless"));
}
S.EndThreeColumn();
}
S.EndStatic();
#endif
}
