Exemplo n.º 1
0
void main()
{
    //SETUP VIDEO BUFFER
    static VideoBuffer vid; //create video buffer for each cube
    vid.initMode(BG0_SPR_BG1); //set video buffer to BG0_SPR_BG1 mode
    vid.attach(0); //attach video buffer to cube with ID 0

    //BACKGROUND LAYER
    vid.bg0.image(vec(0,0), MyBG0Image); //Set the image `Background` defined in assets.lua to the VideoBuffer's BG0 layer

    //SPRITES LAYER
    vid.sprites[0].setImage(MyRedSprite); //assign our first sprite
    vid.sprites[0].move(15,15); //move it to where we want it

    vid.sprites[1].setImage(MyBlueSprite);
    vid.sprites[1].move(93, 60); 

    //FOREGROUND LAYER
    vid.bg1.setMask(BG1Mask::filled(vec(4,4), vec(8,8))); //Mask an area in the location and size of our BG1 image
    vid.bg1.image(vec(4,4), MyBG1Image); //Place a BG1 image in the same space as the mask. 

    while (1) { //game looop
        System::paint();
    }
}
Exemplo n.º 2
0
void main()
{
    unsigned fg = BG0ROMDrawable::SOLID_FG ^ BG0ROMDrawable::BLUE;
    unsigned bg = BG0ROMDrawable::SOLID_FG ^ BG0ROMDrawable::BLACK;

    vid.initMode(BG0_ROM);
    vid.attach(cube);
    vid.bg0rom.erase(bg);
    vid.bg0rom.fill(vec(0,0), vec(3,3), fg);

    synthInit();

    float hz = 0;

    while (1) {
        // Scale to [-1, 1]
        auto accel = cube.accel() / 128.f;

        // Glide to the target note (half-steps above or below middle C)
        float note = 261.6f * pow(1.05946f, 8 + round(accel.y * 24.f));
        hz += (note - hz) * 0.4f;

        synthesize(hz, accel.x - 0.2f,
            clamp(accel.x + 0.5f, 0.f, 1.f));

        const Int2 center = LCD_center - vec(24,24)/2;
        vid.bg0rom.setPanning(-(center + accel.xy() * 60.f));
        System::paint();
    }
}
Exemplo n.º 3
0
void main()
{
    CubeID cube(0);

    VideoBuffer vid;
    vid.initMode(BG0);
    vid.attach(cube);

    for (int x = -1; x < 17; x++) {
        drawColumn(vid, x);
    }

    /*
     * Scroll horizontally through our background based on the accelerometer's X axis.
     *
     * We can scroll with pixel accuracy within a column of tiles via bg0.setPanning().
     * When we get to either edge of the currently plotted tiles, draw a new column
     * of tiles from the source image.
     *
     * Because BG0 is 1 tile wider and taller than the viewport itself, we can pre-load
     * the next column of tiles into the column at the edge before it comes into view.
     */

    float x = 0;
    int prev_xt = 0;

    for (;;) {
        // Scroll based on accelerometer tilt
        Int2 accel = vid.physicalAccel().xy();

        // Floating point pixels
        x += accel.x * (40.0f / 128.0f);

        // Integer pixels
        int xi = x + 0.5f;

        // Integer tiles
        int xt = x / 8;

        while (prev_xt < xt) {
            // Fill in new tiles, just past the right edge of the screen
            drawColumn(vid, prev_xt + 17);
            prev_xt++;
        }

        while (prev_xt > xt) {
            // Fill in new tiles, just past the left edge
            drawColumn(vid, prev_xt - 2);
            prev_xt--;
        }

        // pixel-level scrolling within the current column
        vid.bg0.setPanning(vec(xi, 0));

        System::paint();
    }
}
Exemplo n.º 4
0
void main()
{
	vid.initMode(BG0_ROM);
    vid.attach(0);
	
	String <128> text;
	text << "Hello World" << "\n";
	
	vid.bg0rom.text(vec(0,0),text);
	
	playSfx (CountSound);

//	AudioTracker::play(Count);

	while (1)
        System::paint();
}
Exemplo n.º 5
0
void main()
{
    const CubeID cube(0);
    static VideoBuffer vid;
    vid.attach(cube);

    /*
     * Blank the screen. This also blanks the one-pixel region between
     * the bottom of the fractal and the top of the elapsed time indicator
     * below.
     */

    vid.initMode(SOLID_MODE);
    vid.colormap[0] = RGB565::fromRGB(0xFFFFFF);
    System::paint();

    /*
     * We use STAMP mode in a special way here, to do (slow) true-color
     * rendering: The framebuffer is simply set up as an identity mapping
     * that shows each of the 16 colors in our colormap. Now we can put
     * a row of 16 pixels directly into the colormap, and render the screen
     * using 1024 of these little 16x1 pixel "frames".
     *
     * Clearly this is really slow, and this technique is unlikely to be
     * frequently useful, but it's a fun parlour trick :)
     */

    SystemTime startTime = SystemTime::now();

    vid.initMode(STAMP);
    vid.stamp.disableKey();

    auto &fb = vid.stamp.initFB<16,1>();
    for (unsigned i = 0; i < 16; i++)
        fb.plot(vec(i, 0U), i);

    for (unsigned y = 0; y < LCD_height - 9; y++)
        for (unsigned x = 0; x < LCD_width; x += 16) {

            /*
             * Render 16 pixels at a time, into a buffer in RAM.
             */

            static RGB565 pixels[16];

            for (unsigned i = 0; i < 16; i++)
                pixels[i] = calculateMandelbrot(vec(x+i, y));

            /*
             * Now copy to VRAM and start painting. By waiting until
             * now to call finish(), we're allowing the calculation above
             * to run concurrently with the cube's paint operation.
             *
             * Note that our "frames" are actually just tiny pieces of the
             * screen, so we need to avoid the default frame rate limits
             * in order to render at an at all reasonable rate. This is
             * where paintUnlimited() comes into play.
             */

            System::finish();
            vid.stamp.setBox(vec(x,y), vec(16,1));
            vid.colormap.set(pixels);
            System::paintUnlimited();
        }

    /*
     * Use BG0_ROM mode to draw the elapsed time at the bottom of the screen.
     */

    TimeDelta elapsed = SystemTime::now() - startTime;

    String<16> message;
    message << (elapsed.milliseconds() / 1000) << "."
        << Fixed(elapsed.milliseconds() % 1000, 3) << " sec";
    LOG("Elapsed time: %s\n", message.c_str());

    vid.initMode(BG0_ROM);
    vid.bg0rom.text(vec(1,0), message);
    vid.setWindow(LCD_height - 8, 8);

    // Kill time (efficiently)
    while (1)
        System::paint();
}
Exemplo n.º 6
0
void main()
{
    /*
     * Display text in BG0_ROM mode on Cube 0
     */

    CubeID cube = 0;
    vid.initMode(BG0_ROM);
    vid.attach(cube);
    vid.bg0rom.text(vec(0,0), " USB Demo ", vid.bg0rom.WHITE_ON_TEAL);

    // Zero out our counters
    usbCounters.reset();

    /*
     * When we transmit packets in this example, we'll fill them with our
     * cube's accelerometer state. When we receive packets, they'll
     * be hex-dumped to the screen. We also keep counters that show how many
     * packets have been processed.
     *
     * If possible, applications are encouraged to use event handlers so that
     * they only try to read packets when packets are available, and they only
     * write packets when buffer space is available. In this example, we always
     * want to read packets when they arrive, so we keep an onRead() handler
     * registered at all times. We also want to write as long as there's buffer
     * space, but only when a peer is connected. So we'll register and unregister
     * our onWrite() handler in onConnect() and onDisconnect(), respectively.
     *
     * Note that attach() will empty our transmit and receive queues. If we want
     * to enqueue write packets in onConnct(), we need to be sure the pipe is
     * attached before we set up onConnect/onDisconnect.
     */

    Events::usbReadAvailable.set(onReadAvailable);
    usbPipe.attach();
    updatePacketCounts(0, 0);

    /*
     * Watch for incoming connections, and display some text on the screen to
     * indicate connection state.
     */

    Events::usbConnect.set(onConnect);
    Events::usbDisconnect.set(onDisconnect);

    if (Usb::isConnected()) {
        onConnect();
    } else {
        onDisconnect();
    }

    /*
     * Everything else happens in event handlers, nothing to do in our main loop.
     */

    while (1) {

        for (unsigned n = 0; n < 60; n++) {
            readPacket();
            writePacket();
            System::paint();
        }

        /*
         * For debugging, periodically log the USB packet counters.
         */

        usbCounters.capture();
        LOG("USB-Counters: rxPackets=%d txPackets=%d rxBytes=%d txBytes=%d rxUserDropped=%d\n",
            usbCounters.receivedPackets(), usbCounters.sentPackets(),
            usbCounters.receivedBytes(), usbCounters.sentBytes(),
            usbCounters.userPacketsDropped());
    }
}