//==== Insert Wing Sect ====//
void WingGeom::SplitWingSect( int index )
{
WingSect* ws = GetWingSect( index );
if ( ws )
{
double span = ws->m_Span();
double rc = ws->m_RootChord();
double ac = ws->m_AvgChord();
double tc = ws->m_TipChord();
double twist = 0.5*ws->m_Twist();
int curve_type = ws->GetXSecCurve()->GetType();
string ins_id = m_XSecSurf.InsertXSec( curve_type, index );
ws->ForceSpanRcTc( span*0.5, rc, ac );
ws->m_Twist = twist;
ws->Update();
XSec* xs = m_XSecSurf.FindXSec( ins_id );
if ( xs )
{
WingSect* ins_ws = dynamic_cast< WingSect* >(xs);
ins_ws->CopyFrom( ws );
ins_ws->ForceSpanRcTc( span*0.5, ac, tc );
ins_ws->m_Twist = twist;
ins_ws->Update();
}
}
}
//==== Update Wing And Cross Section Placement ====//
void WingGeom::UpdateSurf()
{
//==== Check If Total Span/Chord/Area Has Changed ====//
bool total_change_flag = false;
if ( UpdatedParm( m_TotalSpan.GetID() ) )
{
UpdateTotalSpan();
total_change_flag = true;
}
if ( UpdatedParm( m_TotalProjSpan.GetID() ) )
{
UpdateTotalProjSpan();
total_change_flag = true;
}
if ( UpdatedParm( m_TotalChord.GetID() ) )
{
UpdateTotalChord();
total_change_flag = true;
}
if ( UpdatedParm( m_TotalArea.GetID() ) )
{
UpdateTotalArea();
total_change_flag = true;
}
int active_sect = GetActiveXSecIndex(); // Save Active Section
//==== Set Temp Active XSec Based On Updated Parms ====//
if ( total_change_flag )
SetActiveXSecIndex(1);
else
SetTempActiveXSec();
//==== Make Sure Chord Match For Adjacent Wing Sections ====//
MatchWingSections();
SetActiveXSecIndex(active_sect); // Restore Active Section
// clear the u tessellation vector
m_TessUVec.clear();
vector< VspCurve > crv_vec( m_XSecSurf.NumXSec() );
//==== Compute Parameters For Each Section ====//
double total_span = 0.0;
double total_sweep_offset = 0.0;
double total_dihed_offset = 0.0;
double total_twist = 0.0;
//==== Load End Points for Each Section ====//
for ( int i = 0 ; i < m_XSecSurf.NumXSec() ; i++ )
{
WingSect* ws = ( WingSect* ) m_XSecSurf.FindXSec( i );
if ( ws )
{
//==== Reset Group Names ====//
ws->SetGroupDisplaySuffix( i );
double rad = ws->m_Span();
double ty = rad*cos(GetSumDihedral(i)*DEG_2_RAD);
double tz = rad*sin(GetSumDihedral(i)*DEG_2_RAD);
double tan_le = ws->GetTanSweepAt( ws->m_Sweep(), 0.0 );
double toff = tan_le*rad; // Tip X Offset
if ( i == 0 )
{
ty = 0;
tz = 0;
toff = 0;
}
total_dihed_offset += tz;
total_span += ty;
total_sweep_offset += toff;
if ( m_RelativeTwistFlag() )
total_twist += ws->m_Twist();
else
total_twist = ws->m_Twist();
ws->SetProjectedSpan( ty );
//==== Find Width Parm ====//
string width_id = ws->GetXSecCurve()->GetWidthParmID();
Parm* width_parm = ParmMgr.FindParm( width_id );
if ( width_parm )
{
width_parm->Deactivate();
width_parm->Set( ws->m_TipChord() );
}
double dihead_rot = 0.0;
if ( m_RotateAirfoilMatchDiedralFlag() )
{
if ( i == 0 )
{
dihead_rot = GetSumDihedral( i+1 );
}
else if ( i == m_XSecSurf.NumXSec()-1 )
{
dihead_rot = GetSumDihedral( i );
}
else
{
dihead_rot = 0.5*( GetSumDihedral( i ) + GetSumDihedral( i+1 ) );
}
}
//==== Load Transformations =====//
ws->m_YDelta = total_span;
ws->m_XDelta = total_sweep_offset;
ws->m_ZDelta = total_dihed_offset;
ws->m_YRotate = total_twist;
ws->m_XRotate = dihead_rot;
ws->m_XCenterRot = ws->m_XDelta + ws->m_TwistLoc()*ws->m_TipChord();
ws->m_YCenterRot = ws->m_YDelta;
ws->m_ZCenterRot = ws->m_ZDelta;
crv_vec[i] = ws->GetCurve();
if ( i > 0 )
{
m_TessUVec.push_back( ws->m_SectTessU() );
}
}
}
m_MainSurfVec[0].SkinC0( crv_vec, false );
if ( m_XSecSurf.GetFlipUD() )
{
m_MainSurfVec[0].FlipNormal();
}
m_MainSurfVec[0].SetSurfType( vsp::WING_SURF );
//==== Load Totals ====//
m_TotalSpan = ComputeTotalSpan();
m_TotalProjSpan = ComputeTotalProjSpan();
m_TotalChord = ComputeTotalChord();
m_TotalArea = ComputeTotalArea();
}
//==== Update Wing Screen ====//
bool WingScreen::Update()
{
assert( m_ScreenMgr );
char str[256];
Geom* geom_ptr = m_ScreenMgr->GetCurrGeom();
if ( !geom_ptr || geom_ptr->GetType().m_Type != MS_WING_GEOM_TYPE )
{
Hide();
return false;
}
GeomScreen::Update();
m_NumUSlider.Deactivate();
WingGeom* wing_ptr = dynamic_cast< WingGeom* >( geom_ptr );
assert( wing_ptr );
//==== Plan Parms ===//
m_PlanSpanSlider.Update( wing_ptr->m_TotalSpan.GetID() );
m_PlanProjSpanSlider.Update( wing_ptr->m_TotalProjSpan.GetID() );
m_PlanChordSlider.Update( wing_ptr->m_TotalChord.GetID() );
m_PlanAreaSlider.Update( wing_ptr->m_TotalArea.GetID() );
m_LEClusterSlider.Update( wing_ptr->m_LECluster.GetID() );
m_TEClusterSlider.Update( wing_ptr->m_TECluster.GetID() );
sprintf( str, "%6.4f", wing_ptr->m_TotalProjSpan() * wing_ptr->m_TotalProjSpan() / wing_ptr->m_TotalArea() );
m_PlanAROutput.Update( str );
m_RootCapTypeChoice.Update( wing_ptr->m_CapUMinOption.GetID() );
m_TipCapTypeChoice.Update( wing_ptr->m_CapUMaxOption.GetID() );
if ( wing_ptr->m_CapUMinOption() == VspSurf::NO_END_CAP &&
wing_ptr->m_CapUMaxOption() == VspSurf::NO_END_CAP )
{
m_CapTessSlider.Deactivate();
}
else
{
m_CapTessSlider.Update( wing_ptr->m_CapUMinTess.GetID() );
}
WingSect* root_sect = dynamic_cast<WingSect*>(wing_ptr->GetXSec( 0 ));
if ( root_sect )
{
m_IncidenceSlider.Update( root_sect->m_Twist.GetID() );
m_IncidenceLocSlider.Update( root_sect->m_TwistLoc.GetID() );
}
sprintf( str, " %d", wing_ptr->NumXSec()-1 );
m_NumSectOutput.Update( str );
////==== Wing Section Index Display ====//
int ws_index = wing_ptr->GetActiveXSecIndex();
m_SectIndexSelector.SetIndex( ws_index );
WingSect* wing_sect = dynamic_cast<WingSect*>(wing_ptr->GetXSec( ws_index ));
if ( wing_sect )
{
m_SectUTessSlider.Update( wing_sect->m_SectTessU.GetID() );
m_RootClusterSlider.Update( wing_sect->m_RootCluster.GetID() );
m_TipClusterSlider.Update( wing_sect->m_TipCluster.GetID() );
m_WingDriverGroupBank.SetDriverGroup( &wing_sect->m_DriverGroup );
vector< string > parm_ids = wing_sect->GetDriverParms();
wing_sect->m_DriverGroup.UpdateGroup( parm_ids );
m_WingDriverGroupBank.Update( parm_ids );
m_SweepSlider.Update( wing_sect->m_Sweep.GetID() );
m_SweepLocSlider.Update( wing_sect->m_SweepLoc.GetID() );
m_SecSweepLocSlider.Update( wing_sect->m_SecSweepLoc.GetID() );
m_TwistSlider.Update( wing_sect->m_Twist.GetID() );
m_TwistLocSlider.Update( wing_sect->m_TwistLoc.GetID() );
m_DihedralSlider.Update( wing_sect->m_Dihedral.GetID() );
m_DihedralAbsRelToggle.Update( wing_ptr->m_RelativeDihedralFlag.GetID() );
m_TwistAbsRelToggle.Update( wing_ptr->m_RelativeTwistFlag.GetID() );
m_RotateFoilMatchDihedral.Update( wing_ptr->m_RotateAirfoilMatchDiedralFlag.GetID() );
sprintf( str, " %6.4f", wing_sect->GetProjectedSpan() );
m_SectProjSpanOutput.Update( str );
}
//==== XSec Index Display ===//
int xsid = wing_ptr->GetActiveAirfoilIndex();
m_AfIndexSelector.SetIndex( xsid );
m_AfModIndexSelector.SetIndex( xsid );
WingSect* ws = ( WingSect* ) wing_ptr->GetXSec( xsid );
if ( ws )
{
XSecCurve* xsc = ws->GetXSecCurve();
if ( xsc )
{
m_AfTypeChoice.SetVal( xsc->GetType() );
if ( xsc->GetType() == XS_POINT )
{
DisplayGroup( NULL );
}
else if ( xsc->GetType() == XS_SUPER_ELLIPSE )
{
DisplayGroup( &m_SuperGroup );
SuperXSec* super_xs = dynamic_cast< SuperXSec* >( xsc );
assert( super_xs );
m_SuperHeightSlider.Update( super_xs->m_Height.GetID() );
m_SuperWidthSlider.Update( super_xs->m_Width.GetID() );
m_SuperMSlider.Update( super_xs->m_M.GetID() );
m_SuperNSlider.Update( super_xs->m_N.GetID() );
}
else if ( xsc->GetType() == XS_CIRCLE )
{
DisplayGroup( &m_CircleGroup );
CircleXSec* circle_xs = dynamic_cast< CircleXSec* >( xsc );
assert( circle_xs );
m_DiameterSlider.Update( circle_xs->m_Diameter.GetID() );
}
else if ( xsc->GetType() == XS_ELLIPSE )
{
DisplayGroup( & m_EllipseGroup );
EllipseXSec* ellipse_xs = dynamic_cast< EllipseXSec* >( xsc );
m_EllipseHeightSlider.Update( ellipse_xs->m_Height.GetID() );
m_EllipseWidthSlider.Update( ellipse_xs->m_Width.GetID() );
}
else if ( xsc->GetType() == XS_ROUNDED_RECTANGLE )
{
DisplayGroup( & m_RoundedRectGroup );
RoundedRectXSec* rect_xs = dynamic_cast< RoundedRectXSec* >( xsc );
assert( rect_xs );
m_RRHeightSlider.Update( rect_xs->m_Height.GetID() );
m_RRWidthSlider.Update( rect_xs->m_Width.GetID() );
m_RRRadiusSlider.Update( rect_xs->m_Radius.GetID() );
}
else if ( xsc->GetType() == XS_GENERAL_FUSE )
{
DisplayGroup( &m_GenGroup );
GeneralFuseXSec* gen_xs = dynamic_cast< GeneralFuseXSec* >( xsc );
assert( gen_xs );
m_GenHeightSlider.Update( gen_xs->m_Height.GetID() );
m_GenWidthSlider.Update( gen_xs->m_Width.GetID() );
m_GenMaxWidthLocSlider.Update( gen_xs->m_MaxWidthLoc.GetID() );
m_GenCornerRadSlider.Update( gen_xs->m_CornerRad.GetID() );
m_GenTopTanAngleSlider.Update( gen_xs->m_TopTanAngle.GetID() );
m_GenBotTanAngleSlider.Update( gen_xs->m_BotTanAngle.GetID() );
m_GenTopStrSlider.Update( gen_xs->m_TopStr.GetID() );
m_GenBotStrSlider.Update( gen_xs->m_BotStr.GetID() );
m_GenUpStrSlider.Update( gen_xs->m_UpStr.GetID() );
m_GenLowStrSlider.Update( gen_xs->m_LowStr.GetID() );
}
else if ( xsc->GetType() == XS_FOUR_SERIES )
{
DisplayGroup( &m_FourSeriesGroup );
FourSeries* fs_xs = dynamic_cast< FourSeries* >( xsc );
assert( fs_xs );
m_FourChordSlider.Update( fs_xs->m_Chord.GetID() );
m_FourThickChordSlider.Update( fs_xs->m_ThickChord.GetID() );
m_FourCamberSlider.Update( fs_xs->m_Camber.GetID() );
m_FourCamberLocSlider.Update( fs_xs->m_CamberLoc.GetID() );
m_FourInvertButton.Update( fs_xs->m_Invert.GetID() );
m_FourNameOutput.Update( fs_xs->GetAirfoilName() );
m_FourDegreeCounter.Update( fs_xs->m_FitDegree.GetID() );
m_FourEqArcLenButton.Update( fs_xs->m_EqArcLen.GetID() );
}
else if ( xsc->GetType() == XS_SIX_SERIES )
{
DisplayGroup( &m_SixSeriesGroup );
SixSeries* ss_xs = dynamic_cast< SixSeries* >( xsc );
assert( ss_xs );
m_SixChordSlider.Update( ss_xs->m_Chord.GetID() );
m_SixThickChordSlider.Update( ss_xs->m_ThickChord.GetID() );
m_SixIdealClSlider.Update( ss_xs->m_IdealCl.GetID() );
m_SixASlider.Update( ss_xs->m_A.GetID() );
m_SixInvertButton.Update( ss_xs->m_Invert.GetID() );
m_SixNameOutput.Update( ss_xs->GetAirfoilName() );
m_SixSeriesChoice.Update( ss_xs->m_Series.GetID() );
m_SixDegreeCounter.Update( ss_xs->m_FitDegree.GetID() );
}
else if ( xsc->GetType() == XS_BICONVEX )
{
DisplayGroup( &m_BiconvexGroup );
Biconvex* bi_xs = dynamic_cast< Biconvex* >( xsc );
assert( bi_xs );
m_BiconvexChordSlider.Update( bi_xs->m_Chord.GetID() );
m_BiconvexThickChordSlider.Update( bi_xs->m_ThickChord.GetID() );
}
else if ( xsc->GetType() == XS_WEDGE )
{
DisplayGroup( &m_WedgeGroup );
Wedge* we_xs = dynamic_cast< Wedge* >( xsc );
assert( we_xs );
m_WedgeChordSlider.Update( we_xs->m_Chord.GetID() );
m_WedgeThickChordSlider.Update( we_xs->m_ThickChord.GetID() );
m_WedgeThickLocSlider.Update( we_xs->m_ThickLoc.GetID() );
}
else if ( xsc->GetType() == XS_FILE_FUSE )
{
DisplayGroup( &m_FuseFileGroup );
FileXSec* file_xs = dynamic_cast< FileXSec* >( xsc );
assert( file_xs );
m_FileHeightSlider.Update( file_xs->m_Height.GetID() );
m_FileWidthSlider.Update( file_xs->m_Width.GetID() );
}
else if ( xsc->GetType() == XS_FILE_AIRFOIL )
{
DisplayGroup( &m_AfFileGroup );
FileAirfoil* affile_xs = dynamic_cast< FileAirfoil* >( xsc );
assert( affile_xs );
m_AfFileChordSlider.Update( affile_xs->m_Chord.GetID() );
m_AfFileInvertButton.Update( affile_xs->m_Invert.GetID() );
m_AfFileNameOutput.Update( affile_xs->GetAirfoilName() );
m_AfFileDegreeCounter.Update( affile_xs->m_FitDegree.GetID() );
}
else if ( xsc->GetType() == XS_CST_AIRFOIL )
{
DisplayGroup( &m_CSTAirfoilGroup );
CSTAirfoil* cst_xs = dynamic_cast< CSTAirfoil* >( xsc );
assert( cst_xs );
int num_up = cst_xs->m_UpDeg() + 1;
int num_low = cst_xs->m_LowDeg() + 1;
char str[255];
sprintf( str, "%d", cst_xs->m_UpDeg() );
m_UpDegreeOutput.Update( str );
sprintf( str, "%d", cst_xs->m_LowDeg() );
m_LowDegreeOutput.Update( str );
m_CSTInvertButton.Update( cst_xs->m_Invert.GetID() );
m_CSTContLERadButton.Update( cst_xs->m_ContLERad.GetID() );
m_CSTEqArcLenButton.Update( cst_xs->m_EqArcLen.GetID() );
if ( ( m_UpCoeffSliderVec.size() != num_up ) || ( m_LowCoeffSliderVec.size() != num_low ) )
{
RebuildCSTGroup( cst_xs );
}
for ( int i = 0; i < num_up; i++ )
{
Parm *p = cst_xs->m_UpCoeffParmVec[i];
if ( p )
{
m_UpCoeffSliderVec[i].Update( p->GetID() );
}
}
for ( int i = 0; i < num_low; i++ )
{
Parm *p = cst_xs->m_LowCoeffParmVec[i];
if ( p )
{
m_LowCoeffSliderVec[i].Update( p->GetID() );
}
}
if ( cst_xs->m_ContLERad() && num_low > 0 )
{
m_LowCoeffSliderVec[0].Deactivate();
}
}
m_TECloseChoice.Update( xsc->m_TECloseType.GetID() );
m_TECloseGroup.Update( xsc->m_TECloseAbsRel.GetID() );
m_CloseThickSlider.Update( xsc->m_TECloseThick.GetID() );
m_CloseThickChordSlider.Update( xsc->m_TECloseThickChord.GetID() );
if ( xsc->m_TECloseType() != CLOSE_NONE )
{
m_TECloseABSButton.Activate();
m_TECloseRELButton.Activate();
if ( xsc->m_TECloseAbsRel() == ABS )
{
m_CloseThickSlider.Activate();
m_CloseThickChordSlider.Deactivate();
}
else
{
m_CloseThickSlider.Deactivate();
m_CloseThickChordSlider.Activate();
}
}
else
{
m_CloseThickSlider.Deactivate();
m_CloseThickChordSlider.Deactivate();
m_TECloseABSButton.Deactivate();
m_TECloseRELButton.Deactivate();
}
m_TETrimChoice.Update( xsc->m_TETrimType.GetID() );
m_TETrimGroup.Update( xsc->m_TETrimAbsRel.GetID() );
m_TrimXSlider.Update( xsc->m_TETrimX.GetID() );
m_TrimXChordSlider.Update( xsc->m_TETrimXChord.GetID() );
m_TrimThickSlider.Update( xsc->m_TETrimThick.GetID() );
m_TrimThickChordSlider.Update( xsc->m_TETrimThickChord.GetID() );
m_TrimXSlider.Deactivate();
m_TrimXChordSlider.Deactivate();
m_TrimThickSlider.Deactivate();
m_TrimThickChordSlider.Deactivate();
m_TETrimABSButton.Deactivate();
m_TETrimRELButton.Deactivate();
if ( xsc->m_TETrimType() != TRIM_NONE )
{
m_TETrimABSButton.Activate();
m_TETrimRELButton.Activate();
}
if ( xsc->m_TETrimType() == TRIM_X )
{
if ( xsc->m_TETrimAbsRel() == ABS )
{
m_TrimXSlider.Activate();
}
else
{
m_TrimXChordSlider.Activate();
}
}
else if ( xsc->m_TETrimType() == TRIM_THICK )
{
if ( xsc->m_TETrimAbsRel() == ABS )
{
m_TrimThickSlider.Activate();
}
else
{
m_TrimThickChordSlider.Activate();
}
}
m_AFThetaSlider.Update( xsc->m_Theta.GetID() );
m_AFScaleSlider.Update( xsc->m_Scale.GetID() );
m_AFDeltaXSlider.Update( xsc->m_DeltaX.GetID() );
m_AFDeltaYSlider.Update( xsc->m_DeltaY.GetID() );
m_AFShiftLESlider.Update( xsc->m_ShiftLE.GetID() );
}
}
return true;
}
