int PCB_EDITOR_CONTROL::ZoneUnfillAll( const TOOL_EVENT& aEvent )
{
    BOARD* board = getModel<BOARD>();
    RN_DATA* ratsnest = board->GetRatsnest();

    BOARD_COMMIT commit( this );

    for( int i = 0; i < board->GetAreaCount(); ++i )
    {
        ZONE_CONTAINER* zone = board->GetArea( i );

        commit.Modify( zone );

        zone->SetIsFilled( false );
        zone->ClearFilledPolysList();
        ratsnest->Update( zone );
        getView()->Update( zone );
    }

    commit.Push( _( "Unfill All Zones" ) );

    ratsnest->Recalculate();

    return 0;
}
int PCB_EDITOR_CONTROL::ZoneUnfill( const TOOL_EVENT& aEvent )
{
    auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
    const auto& selection = selTool->GetSelection();
    RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();

    BOARD_COMMIT commit( this );

    for( auto item : selection )
    {
        assert( item->Type() == PCB_ZONE_AREA_T );

        ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );

        commit.Modify( zone );

        zone->SetIsFilled( false );
        zone->ClearFilledPolysList();
        ratsnest->Update( zone );
        getView()->Update( zone );
    }

    commit.Push( _( "Unfill Zone" ) );

    ratsnest->Recalculate();

    return 0;
}
int PCB_EDITOR_CONTROL::ZoneUnfillAll( const TOOL_EVENT& aEvent )
{
    BOARD* board = getModel<BOARD>();

    for( int i = 0; i < board->GetAreaCount(); ++i )
    {
        ZONE_CONTAINER* zone = board->GetArea( i );
        zone->SetIsFilled( false );
        zone->ClearFilledPolysList();
        zone->ViewUpdate();
    }

    setTransitions();

    return 0;
}
int PCB_EDITOR_CONTROL::ZoneUnfillAll( const TOOL_EVENT& aEvent )
{
    BOARD* board = getModel<BOARD>();
    RN_DATA* ratsnest = board->GetRatsnest();

    for( int i = 0; i < board->GetAreaCount(); ++i )
    {
        ZONE_CONTAINER* zone = board->GetArea( i );
        zone->SetIsFilled( false );
        zone->ClearFilledPolysList();
        ratsnest->Update( zone );
        zone->ViewUpdate();
    }

    ratsnest->Recalculate();

    return 0;
}
int PCB_EDITOR_CONTROL::ZoneUnfill( TOOL_EVENT& aEvent )
{
    SELECTION_TOOL* selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
    const SELECTION& selection = selTool->GetSelection();

    for( int i = 0; i < selection.Size(); ++i )
    {
        assert( selection.Item<BOARD_ITEM>( i )->Type() == PCB_ZONE_AREA_T );

        ZONE_CONTAINER* zone = selection.Item<ZONE_CONTAINER>( i );
        zone->SetIsFilled( false );
        zone->ClearFilledPolysList();
        zone->ViewUpdate();
    }

    setTransitions();

    return 0;
}
int PCB_EDITOR_CONTROL::ZoneUnfill( const TOOL_EVENT& aEvent )
{
    SELECTION_TOOL* selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
    const SELECTION& selection = selTool->GetSelection();
    RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest();

    for( int i = 0; i < selection.Size(); ++i )
    {
        assert( selection.Item<BOARD_ITEM>( i )->Type() == PCB_ZONE_AREA_T );

        ZONE_CONTAINER* zone = selection.Item<ZONE_CONTAINER>( i );
        zone->SetIsFilled( false );
        zone->ClearFilledPolysList();
        ratsnest->Update( zone );
        zone->ViewUpdate();
    }

    ratsnest->Recalculate();

    return 0;
}
Exemplo n.º 7
0
void POINT_EDITOR::updateItem() const
{
    EDA_ITEM* item = m_editPoints->GetParent();

    switch( item->Type() )
    {
    case PCB_LINE_T:
    case PCB_MODULE_EDGE_T:
    {
        DRAWSEGMENT* segment = static_cast<DRAWSEGMENT*>( item );
        switch( segment->GetShape() )
        {
        case S_SEGMENT:
            if( isModified( m_editPoints->Point( SEG_START ) ) )
                segment->SetStart( wxPoint( m_editPoints->Point( SEG_START ).GetPosition().x,
                                            m_editPoints->Point( SEG_START ).GetPosition().y ) );

            else if( isModified( m_editPoints->Point( SEG_END ) ) )
                segment->SetEnd( wxPoint( m_editPoints->Point( SEG_END ).GetPosition().x,
                                          m_editPoints->Point( SEG_END ).GetPosition().y ) );

            break;

        case S_ARC:
        {
            const VECTOR2I& center = m_editPoints->Point( ARC_CENTER ).GetPosition();
            const VECTOR2I& start = m_editPoints->Point( ARC_START ).GetPosition();
            const VECTOR2I& end = m_editPoints->Point( ARC_END ).GetPosition();

            if( center != segment->GetCenter() )
            {
                wxPoint moveVector = wxPoint( center.x, center.y ) - segment->GetCenter();
                segment->Move( moveVector );

                m_editPoints->Point( ARC_START ).SetPosition( segment->GetArcStart() );
                m_editPoints->Point( ARC_END ).SetPosition( segment->GetArcEnd() );
            }

            else
            {
                segment->SetArcStart( wxPoint( start.x, start.y ) );

                VECTOR2D startLine = start - center;
                VECTOR2I endLine = end - center;
                double newAngle = RAD2DECIDEG( endLine.Angle() - startLine.Angle() );

                // Adjust the new angle to (counter)clockwise setting
                bool clockwise = ( segment->GetAngle() > 0 );

                if( clockwise && newAngle < 0.0 )
                    newAngle += 3600.0;
                else if( !clockwise && newAngle > 0.0 )
                    newAngle -= 3600.0;

                segment->SetAngle( newAngle );
            }

            break;
        }

        case S_CIRCLE:
        {
            const VECTOR2I& center = m_editPoints->Point( CIRC_CENTER ).GetPosition();
            const VECTOR2I& end = m_editPoints->Point( CIRC_END ).GetPosition();

            if( isModified( m_editPoints->Point( CIRC_CENTER ) ) )
            {
                wxPoint moveVector = wxPoint( center.x, center.y ) - segment->GetCenter();
                segment->Move( moveVector );
            }
            else
            {
                segment->SetEnd( wxPoint( end.x, end.y ) );
            }

            break;
        }

        default:        // suppress warnings
            break;
        }

        // Update relative coordinates for module edges
        if( EDGE_MODULE* edge = dyn_cast<EDGE_MODULE*>( item ) )
            edge->SetLocalCoord();

        break;
    }

    case PCB_ZONE_AREA_T:
    {
        ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
        zone->ClearFilledPolysList();
        CPolyLine* outline = zone->Outline();

        for( int i = 0; i < outline->GetCornersCount(); ++i )
        {
            VECTOR2I point = m_editPoints->Point( i ).GetPosition();
            outline->SetX( i, point.x );
            outline->SetY( i, point.y );
        }

        break;
    }

    case PCB_DIMENSION_T:
    {
        DIMENSION* dimension = static_cast<DIMENSION*>( item );

        // Check which point is currently modified and updated dimension's points respectively
        if( isModified( m_editPoints->Point( DIM_CROSSBARO ) ) )
        {
            VECTOR2D featureLine( m_editedPoint->GetPosition() - dimension->GetOrigin() );
            VECTOR2D crossBar( dimension->GetEnd() - dimension->GetOrigin() );

            if( featureLine.Cross( crossBar ) > 0 )
                dimension->SetHeight( -featureLine.EuclideanNorm() );
            else
                dimension->SetHeight( featureLine.EuclideanNorm() );
        }

        else if( isModified( m_editPoints->Point( DIM_CROSSBARF ) ) )
        {
            VECTOR2D featureLine( m_editedPoint->GetPosition() - dimension->GetEnd() );
            VECTOR2D crossBar( dimension->GetEnd() - dimension->GetOrigin() );

            if( featureLine.Cross( crossBar ) > 0 )
                dimension->SetHeight( -featureLine.EuclideanNorm() );
            else
                dimension->SetHeight( featureLine.EuclideanNorm() );
        }

        else if( isModified( m_editPoints->Point( DIM_FEATUREGO ) ) )
        {
            dimension->SetOrigin( wxPoint( m_editedPoint->GetPosition().x, m_editedPoint->GetPosition().y ) );
            m_editPoints->Point( DIM_CROSSBARO ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARO ),
                                                                             m_editPoints->Point( DIM_FEATUREGO ) ) );
            m_editPoints->Point( DIM_CROSSBARF ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARF ),
                                                                             m_editPoints->Point( DIM_FEATUREDO ) ) );
        }

        else if( isModified( m_editPoints->Point( DIM_FEATUREDO ) ) )
        {
            dimension->SetEnd( wxPoint( m_editedPoint->GetPosition().x, m_editedPoint->GetPosition().y ) );
            m_editPoints->Point( DIM_CROSSBARO ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARO ),
                                                                             m_editPoints->Point( DIM_FEATUREGO ) ) );
            m_editPoints->Point( DIM_CROSSBARF ).SetConstraint( new EC_LINE( m_editPoints->Point( DIM_CROSSBARF ),
                                                                             m_editPoints->Point( DIM_FEATUREDO ) ) );
        }

        break;
    }

    default:
        break;
    }
}