QString UnitsSchemaMKS::schemaTranslate(Base::Quantity quant,double &factor,QString &unitString)
{
double UnitValue = std::abs(quant.getValue());
Unit unit = quant.getUnit();
// now do special treatment on all cases seams nececarry:
if(unit == Unit::Length){ // Length handling ============================
if(UnitValue < 0.000000001){// smaller then 0.001 nm -> scientific notation
unitString = QString::fromLatin1("mm");
factor = 1.0;
}else if(UnitValue < 0.001){
unitString = QString::fromLatin1("nm");
factor = 0.000001;
}else if(UnitValue < 0.1){
unitString = QString::fromUtf8("\xC2\xB5m");
factor = 0.001;
}else if(UnitValue < 100.0){
unitString = QString::fromLatin1("mm");
factor = 1.0;
}else if(UnitValue < 10000000.0){
unitString = QString::fromLatin1("m");
factor = 1000.0;
}else if(UnitValue < 100000000000.0 ){
unitString = QString::fromLatin1("km");
factor = 1000000.0;
}else{ // bigger then 1000 km -> scientific notation
unitString = QString::fromLatin1("mm");
factor = 1.0;
}
}else if (unit == Unit::Area){
// TODO Cascade for the Areas
// default action for all cases without special treatment:
unitString = quant.getUnit().getString();
factor = 1.0;
}else if (unit == Unit::Mass){
// TODO Cascade for the wights
// default action for all cases without special treatment:
unitString = quant.getUnit().getString();
factor = 1.0;
}else if (unit == Unit::Pressure){
if(UnitValue < 10.0){// Pa is the smallest
unitString = QString::fromLatin1("Pa");
factor = 0.001;
}else if(UnitValue < 10000.0){
unitString = QString::fromLatin1("kPa");
factor = 1.0;
}else if(UnitValue < 10000000.0){
unitString = QString::fromLatin1("GPa");
factor = 1000.0;
}else{ // bigger then 1000 GPa -> scientific notation
unitString = QString::fromLatin1("Pa");
factor = 1.0;
}
}else{
// default action for all cases without special treatment:
unitString = quant.getUnit().getString();
factor = 1.0;
}
return QString::fromUtf8("%L1 %2").arg(quant.getValue() / factor).arg(unitString);
}
QString UnitsSchemaImperialDecimal::schemaTranslate(Base::Quantity quant,double &factor,QString &unitString)
{
double UnitValue = std::abs(quant.getValue());
Unit unit = quant.getUnit();
// for imperial user/programmer mind; UnitValue is in internal system, that means
// mm/kg/s. And all combined units have to be calculated from there!
// now do special treatment on all cases seems necessary:
if(unit == Unit::Length){ // Length handling ============================
if(UnitValue < 0.00000254){// smaller then 0.001 thou -> inch and scientific notation
unitString = QString::fromLatin1("in");
factor = 25.4;
//}else if(UnitValue < 2.54){ // smaller then 0.1 inch -> Thou (mil)
// unitString = QString::fromLatin1("thou");
// factor = 0.0254;
}else{ // bigger then 1000 mi -> scientific notation
unitString = QString::fromLatin1("in");
factor = 25.4;
}
}else if (unit == Unit::Area){
// TODO Cascade for the Areas
// default action for all cases without special treatment:
unitString = QString::fromLatin1("in^2");
factor = 645.16;
}else if (unit == Unit::Volume){
// TODO Cascade for the Volume
// default action for all cases without special treatment:
unitString = QString::fromLatin1("in^3");
factor = 16387.064;
}else if (unit == Unit::Mass){
// TODO Cascade for the wights
// default action for all cases without special treatment:
unitString = QString::fromLatin1("lb");
factor = 0.45359237;
}else if (unit == Unit::Pressure){
if(UnitValue < 145.038){// psi is the smallest
unitString = QString::fromLatin1("psi");
factor = 0.145038;
//}else if(UnitValue < 145038){
// unitString = QString::fromLatin1("ksi");
// factor = 145.038;
}else{ // bigger then 1000 ksi -> psi + scientific notation
unitString = QString::fromLatin1("psi");
factor = 0.145038;
}
}else{
// default action for all cases without special treatment:
unitString = quant.getUnit().getString();
factor = 1.0;
}
//return QString::fromLatin1("%L1 %2").arg(quant.getValue() / factor).arg(unitString);
QLocale Lc = QLocale::system();
Lc.setNumberOptions(Lc.OmitGroupSeparator | Lc.RejectGroupSeparator);
QString Ln = Lc.toString((quant.getValue() / factor), 'f', Base::UnitsApi::getDecimals());
return QString::fromUtf8("%1 %2").arg(Ln).arg(unitString);
}
/// sets the field with a quantity
void InputField::setValue(const Base::Quantity& quant)
{
actQuantity = quant;
if(!quant.getUnit().isEmpty())
actUnit = quant.getUnit();
double dFactor;
setText(quant.getUserString(dFactor,actUnitStr));
actUnitValue = quant.getValue()/dFactor;
}
void DlgExpressionInput::textChanged(const QString &text)
{
try {
//resize the input field according to text size
QFontMetrics fm(ui->expression->font());
int width = fm.width(text) + 15;
if (width < minimumWidth)
ui->expression->setMinimumWidth(minimumWidth);
else
ui->expression->setMinimumWidth(width);
if(this->width() < ui->expression->minimumWidth())
setMinimumWidth(ui->expression->minimumWidth());
//now handle expression
boost::shared_ptr<Expression> expr(ExpressionParser::parse(path.getDocumentObject(), text.toUtf8().constData()));
if (expr) {
std::string error = path.getDocumentObject()->ExpressionEngine.validateExpression(path, expr);
if (error.size() > 0)
throw Base::Exception(error.c_str());
std::unique_ptr<Expression> result(expr->eval());
expression = expr;
ui->okBtn->setEnabled(true);
ui->msg->clear();
NumberExpression * n = Base::freecad_dynamic_cast<NumberExpression>(result.get());
if (n) {
Base::Quantity value = n->getQuantity();
if (!value.getUnit().isEmpty() && value.getUnit() != impliedUnit)
throw Base::Exception("Unit mismatch between result and required unit");
value.setUnit(impliedUnit);
ui->msg->setText(value.getUserString());
}
else
ui->msg->setText(Base::Tools::fromStdString(result->toString()));
//set default palette as we may have read text right now
ui->msg->setPalette(ui->okBtn->palette());
}
}
catch (Base::Exception & e) {
ui->msg->setText(QString::fromUtf8(e.what()));
QPalette p(ui->msg->palette());
p.setColor(QPalette::WindowText, Qt::red);
ui->msg->setPalette(p);
ui->okBtn->setDisabled(true);
}
}
QString UnitsSchemaInternal::schemaTranslate(Base::Quantity quant)
{
double UnitValue = quant.getValue();
Unit unit = quant.getUnit();
return QString::fromAscii("%1 %2").arg(UnitValue).arg(QString::fromAscii(unit.getString().c_str()));
}
void QuantitySpinBox::setValue(const Base::Quantity& value)
{
Q_D(QuantitySpinBox);
d->quantity = value;
// check limits
if (d->quantity.getValue() > d->maximum)
d->quantity.setValue(d->maximum);
if (d->quantity.getValue() < d->minimum)
d->quantity.setValue(d->minimum);
d->unit = value.getUnit();
updateText(value);
}
PyObject* SketchObjectPy::setDatum(PyObject *args)
{
double Datum;
int Index;
PyObject* object;
Base::Quantity Quantity;
if (PyArg_ParseTuple(args,"iO!", &Index, &(Base::QuantityPy::Type), &object)) {
Quantity = *(static_cast<Base::QuantityPy*>(object)->getQuantityPtr());
if (Quantity.getUnit() == Base::Unit::Angle)
//Datum = Quantity.getValueAs(Base::Quantity::Radian);
Datum = Base::toRadians<double>(Quantity.getValue());
else
Datum = Quantity.getValue();
}
else {
PyErr_Clear();
if (!PyArg_ParseTuple(args, "id", &Index, &Datum))
return 0;
Quantity.setValue(Datum);
}
int err=this->getSketchObjectPtr()->setDatum(Index, Datum);
if (err) {
std::stringstream str;
if (err == -1)
str << "Invalid constraint index: " << Index;
else if (err == -3)
str << "Cannot set the datum because the sketch contains conflicting constraints";
else if (err == -2)
str << "Datum " << (const char*)Quantity.getUserString().toUtf8() << " for the constraint with index " << Index << " is invalid";
else if (err == -4)
str << "Negative datum values are not valid for the constraint with index " << Index;
else if (err == -5)
str << "Zero is not a valid datum for the constraint with index " << Index;
else
str << "Unexpected problem at setting datum " << (const char*)Quantity.getUserString().toUtf8() << " for the constraint with index " << Index;
PyErr_SetString(PyExc_ValueError, str.str().c_str());
return 0;
}
Py_Return;
}
PyObject* SketchObjectPy::setDatum(PyObject *args)
{
double Datum;
int Index;
PyObject* object;
Base::Quantity Quantity;
do {
// handle (int,Quantity)
if (PyArg_ParseTuple(args,"iO!", &Index, &(Base::QuantityPy::Type), &object)) {
Quantity = *(static_cast<Base::QuantityPy*>(object)->getQuantityPtr());
if (Quantity.getUnit() == Base::Unit::Angle) {
Datum = Base::toRadians<double>(Quantity.getValue());
break;
}
else {
Datum = Quantity.getValue();
break;
}
}
// handle (int,double)
PyErr_Clear();
if (PyArg_ParseTuple(args, "id", &Index, &Datum)) {
Quantity.setValue(Datum);
break;
}
// handle (string,Quantity)
char* constrName;
PyErr_Clear();
if (PyArg_ParseTuple(args,"sO!", &constrName, &(Base::QuantityPy::Type), &object)) {
Quantity = *(static_cast<Base::QuantityPy*>(object)->getQuantityPtr());
if (Quantity.getUnit() == Base::Unit::Angle) {
Datum = Base::toRadians<double>(Quantity.getValue());
}
else {
Datum = Quantity.getValue();
}
int i = 0;
Index = -1;
const std::vector<Constraint*>& vals = this->getSketchObjectPtr()->Constraints.getValues();
for (std::vector<Constraint*>::const_iterator it = vals.begin(); it != vals.end(); ++it, ++i) {
if ((*it)->Name == constrName) {
Index = i;
break;
}
}
if (Index >= 0) {
break;
}
else {
std::stringstream str;
str << "Invalid constraint name: '" << constrName << "'";
PyErr_SetString(PyExc_ValueError, str.str().c_str());
return 0;
}
}
// handle (string,double)
PyErr_Clear();
if (PyArg_ParseTuple(args, "sd", &constrName, &Datum)) {
Quantity.setValue(Datum);
int i = 0;
Index = -1;
const std::vector<Constraint*>& vals = this->getSketchObjectPtr()->Constraints.getValues();
for (std::vector<Constraint*>::const_iterator it = vals.begin(); it != vals.end(); ++it, ++i) {
if ((*it)->Name == constrName) {
Index = i;
break;
}
}
if (Index >= 0) {
break;
}
else {
std::stringstream str;
str << "Invalid constraint name: '" << constrName << "'";
PyErr_SetString(PyExc_ValueError, str.str().c_str());
return 0;
}
}
// error handling
PyErr_SetString(PyExc_TypeError, "Wrong arguments");
return 0;
}
while (false);
int err=this->getSketchObjectPtr()->setDatum(Index, Datum);
if (err) {
std::stringstream str;
if (err == -1)
str << "Invalid constraint index: " << Index;
else if (err == -3)
str << "Cannot set the datum because the sketch contains conflicting constraints";
else if (err == -2)
str << "Datum " << (const char*)Quantity.getUserString().toUtf8() << " for the constraint with index " << Index << " is invalid";
else if (err == -4)
str << "Negative datum values are not valid for the constraint with index " << Index;
else if (err == -5)
str << "Zero is not a valid datum for the constraint with index " << Index;
else if (err == -6)
str << "Cannot set the datum because of invalid geometry";
else
str << "Unexpected problem at setting datum " << (const char*)Quantity.getUserString().toUtf8() << " for the constraint with index " << Index;
PyErr_SetString(PyExc_ValueError, str.str().c_str());
return 0;
}
Py_Return;
}
// constructor method
int ConstraintPy::PyInit(PyObject* args, PyObject* /*kwd*/)
{
if (PyArg_ParseTuple(args, "")) {
return 0;
}
PyErr_Clear();
char *ConstraintType;
int FirstIndex = Constraint::GeoUndef;
int FirstPos = none;
int SecondIndex= Constraint::GeoUndef;
int SecondPos = none;
int ThirdIndex = Constraint::GeoUndef;
int ThirdPos = none;
double Value = 0;
int intArg1, intArg2, intArg3, intArg4, intArg5;
// Note: In Python 2.x PyArg_ParseTuple prints a warning if a float is given but an integer is expected.
// This means we must use a PyObject and check afterwards if it's a float or integer.
PyObject* index_or_value;
PyObject* oNumArg4;
PyObject* oNumArg5;
int any_index;
// ConstraintType, GeoIndex
if (PyArg_ParseTuple(args, "si", &ConstraintType, &FirstIndex)) {
if (strcmp("Horizontal",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Horizontal;
this->getConstraintPtr()->First = FirstIndex;
return 0;
}
else if (strcmp("Vertical",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Vertical;
this->getConstraintPtr()->First = FirstIndex;
return 0;
}
}
PyErr_Clear();
if (PyArg_ParseTuple(args, "siO", &ConstraintType, &FirstIndex, &index_or_value)) {
// ConstraintType, GeoIndex1, GeoIndex2
if (PyInt_Check(index_or_value)) {
SecondIndex = PyInt_AsLong(index_or_value);
bool valid = false;
if (strcmp("Tangent",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Tangent;
valid = true;
}
else if (strcmp("Parallel",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Parallel;
valid = true;
}
else if (strcmp("Perpendicular",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Perpendicular;
valid = true;
}
else if (strcmp("Equal",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Equal;
valid = true;
}
else if (strstr(ConstraintType,"InternalAlignment") != NULL) {
this->getConstraintPtr()->Type = InternalAlignment;
valid = true;
if(strstr(ConstraintType,"EllipseMajorDiameter") != NULL)
this->getConstraintPtr()->AlignmentType=EllipseMajorDiameter;
else if(strstr(ConstraintType,"EllipseMinorDiameter") != NULL)
this->getConstraintPtr()->AlignmentType=EllipseMinorDiameter;
else {
this->getConstraintPtr()->AlignmentType=Undef;
valid = false;
}
}
if (valid) {
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->Second = SecondIndex;
return 0;
}
}
// ConstraintType, GeoIndex, Value
if (PyNumber_Check(index_or_value)) { // can be float or int
Value = PyFloat_AsDouble(index_or_value);
bool valid = false;
if (strcmp("Distance",ConstraintType) == 0 ) {
this->getConstraintPtr()->Type = Distance;
valid = true;
}
else if (strcmp("Angle",ConstraintType) == 0 ) {
if (PyObject_TypeCheck(index_or_value, &(Base::QuantityPy::Type))) {
Base::Quantity q = *(static_cast<Base::QuantityPy*>(index_or_value)->getQuantityPtr());
if (q.getUnit() == Base::Unit::Angle)
Value = q.getValueAs(Base::Quantity::Radian);
}
this->getConstraintPtr()->Type = Angle;
valid = true;
}
else if (strcmp("DistanceX",ConstraintType) == 0) {
this->getConstraintPtr()->Type = DistanceX;
valid = true;
}
else if (strcmp("DistanceY",ConstraintType) == 0) {
this->getConstraintPtr()->Type = DistanceY;
valid = true;
}
else if (strcmp("Radius",ConstraintType) == 0) {
this->getConstraintPtr()->Type = Radius;
// set a value that is out of range of result of atan2
// this value is handled in ViewProviderSketch
this->getConstraintPtr()->LabelPosition = 10;
valid = true;
}
if (valid) {
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->setValue(Value);
return 0;
}
}
}
PyErr_Clear();
if (PyArg_ParseTuple(args, "siiO", &ConstraintType, &FirstIndex, &any_index, &index_or_value)) {
// ConstraintType, GeoIndex1, PosIndex1, GeoIndex2
if (PyInt_Check(index_or_value)) {
FirstPos = any_index;
SecondIndex = PyInt_AsLong(index_or_value);
bool valid = false;
if (strcmp("Perpendicular", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Perpendicular;
valid = true;
}
else if (strcmp("Tangent", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Tangent;
valid = true;
}
else if (strcmp("PointOnObject", ConstraintType) == 0) {
this->getConstraintPtr()->Type = PointOnObject;
valid = true;
}
else if (strstr(ConstraintType,"InternalAlignment") != NULL) {
this->getConstraintPtr()->Type = InternalAlignment;
valid = true;
if(strstr(ConstraintType,"EllipseFocus1") != NULL)
this->getConstraintPtr()->AlignmentType=EllipseFocus1;
else if(strstr(ConstraintType,"EllipseFocus2") != NULL)
this->getConstraintPtr()->AlignmentType=EllipseFocus2;
else {
this->getConstraintPtr()->AlignmentType=Undef;
valid = false;
}
}
if (valid) {
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) FirstPos;
this->getConstraintPtr()->Second = SecondIndex;
return 0;
}
}
// ConstraintType, GeoIndex1, GeoIndex2, Value
// ConstraintType, GeoIndex, PosIndex, Value
if (PyNumber_Check(index_or_value)) { // can be float or int
SecondIndex = any_index;
Value = PyFloat_AsDouble(index_or_value);
//if (strcmp("Distance",ConstraintType) == 0) {
// this->getConstraintPtr()->Type = Distance;
// this->getConstraintPtr()->First = FirstIndex;
// this->getConstraintPtr()->Second = SecondIndex;
// this->getConstraintPtr()->Value = Value;
// return 0;
//}
//else
if (strcmp("Angle",ConstraintType) == 0) {
if (PyObject_TypeCheck(index_or_value, &(Base::QuantityPy::Type))) {
Base::Quantity q = *(static_cast<Base::QuantityPy*>(index_or_value)->getQuantityPtr());
if (q.getUnit() == Base::Unit::Angle)
Value = q.getValueAs(Base::Quantity::Radian);
}
this->getConstraintPtr()->Type = Angle;
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->Second = SecondIndex;
this->getConstraintPtr()->setValue(Value);
return 0;
}
else if (strcmp("DistanceX",ConstraintType) == 0) {
FirstPos = SecondIndex;
SecondIndex = -1;
this->getConstraintPtr()->Type = DistanceX;
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) FirstPos;
this->getConstraintPtr()->setValue(Value);
return 0;
}
else if (strcmp("DistanceY",ConstraintType) == 0) {
FirstPos = SecondIndex;
SecondIndex = -1;
this->getConstraintPtr()->Type = DistanceY;
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) FirstPos;
this->getConstraintPtr()->setValue(Value);
return 0;
}
}
}
PyErr_Clear();
if (PyArg_ParseTuple(args, "siiiO", &ConstraintType, &intArg1, &intArg2, &intArg3, &oNumArg4)) {
// Value, ConstraintType, GeoIndex1, PosIndex1, GeoIndex2, PosIndex2
if (PyInt_Check(oNumArg4)) {
intArg4 = PyInt_AsLong(oNumArg4);
bool valid = false;
if (strcmp("Coincident", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Coincident;
valid = true;
}
else if (strcmp("Horizontal", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Horizontal;
valid = true;
}
else if (strcmp("Vertical", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Vertical;
valid = true;
}
else if (strcmp("Perpendicular", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Perpendicular;
valid = true;
}
else if (strcmp("Tangent", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Tangent;
valid = true;
}
else if (strcmp("TangentViaPoint", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Tangent;
//valid = true;//non-standard assignment
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = Sketcher::none;
this->getConstraintPtr()->Second = intArg2;
this->getConstraintPtr()->SecondPos = Sketcher::none;
this->getConstraintPtr()->Third = intArg3;
this->getConstraintPtr()->ThirdPos = (Sketcher::PointPos) intArg4;
return 0;
}
else if (strcmp("PerpendicularViaPoint", ConstraintType) == 0) {
this->getConstraintPtr()->Type = Perpendicular;
//valid = true;//non-standard assignment
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = Sketcher::none;
this->getConstraintPtr()->Second = intArg2;
this->getConstraintPtr()->SecondPos = Sketcher::none;
this->getConstraintPtr()->Third = intArg3;
this->getConstraintPtr()->ThirdPos = (Sketcher::PointPos) intArg4;
return 0;
}
if (valid) {
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) intArg2;
this->getConstraintPtr()->Second = intArg3;
this->getConstraintPtr()->SecondPos = (Sketcher::PointPos) intArg4;
return 0;
}
}
// ConstraintType, GeoIndex1, PosIndex1, GeoIndex2, Value
if (PyNumber_Check(oNumArg4)) { // can be float or int
Value = PyFloat_AsDouble(oNumArg4);
if (strcmp("Distance",ConstraintType) == 0 ) {
this->getConstraintPtr()->Type = Distance;
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) intArg2;
this->getConstraintPtr()->Second = intArg3;
this->getConstraintPtr()->setValue(Value);
return 0;
}
}
}
PyErr_Clear();
if (PyArg_ParseTuple(args, "siiiiO", &ConstraintType, &intArg1, &intArg2, &intArg3, &intArg4, &oNumArg5)) {
// ConstraintType, GeoIndex1, PosIndex1, GeoIndex2, PosIndex2, GeoIndex3
if (PyInt_Check(oNumArg5)) {
intArg5 = PyInt_AsLong(oNumArg5);
if (strcmp("Symmetric",ConstraintType) == 0 ) {
this->getConstraintPtr()->Type = Symmetric;
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) intArg2;
this->getConstraintPtr()->Second = intArg3;
this->getConstraintPtr()->SecondPos = (Sketcher::PointPos) intArg4;
this->getConstraintPtr()->Third = intArg5;
return 0;
}
}
// ConstraintType, GeoIndex1, PosIndex1, GeoIndex2, PosIndex2, Value
if (PyNumber_Check(oNumArg5)) { // can be float or int
Value = PyFloat_AsDouble(oNumArg5);
bool valid=false;
if (strcmp("Distance",ConstraintType) == 0 ) {
this->getConstraintPtr()->Type = Distance;
valid = true;
}
else if (strcmp("DistanceX",ConstraintType) == 0) {
this->getConstraintPtr()->Type = DistanceX;
valid = true;
}
else if (strcmp("DistanceY",ConstraintType) == 0) {
this->getConstraintPtr()->Type = DistanceY;
valid = true;
}
else if (strcmp("Angle",ConstraintType) == 0 ) {
if (PyObject_TypeCheck(oNumArg5, &(Base::QuantityPy::Type))) {
Base::Quantity q = *(static_cast<Base::QuantityPy*>(oNumArg5)->getQuantityPtr());
if (q.getUnit() == Base::Unit::Angle)
Value = q.getValueAs(Base::Quantity::Radian);
}
this->getConstraintPtr()->Type = Angle;
valid = true;
}
else if (strcmp("AngleViaPoint",ConstraintType) == 0 ) {
if (PyObject_TypeCheck(oNumArg5, &(Base::QuantityPy::Type))) {
Base::Quantity q = *(static_cast<Base::QuantityPy*>(oNumArg5)->getQuantityPtr());
if (q.getUnit() == Base::Unit::Angle)
Value = q.getValueAs(Base::Quantity::Radian);
}
this->getConstraintPtr()->Type = Angle;
//valid = true;//non-standard assignment
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = Sketcher::none;
this->getConstraintPtr()->Second = intArg2; //let's goof up all the terminology =)
this->getConstraintPtr()->SecondPos = Sketcher::none;
this->getConstraintPtr()->Third = intArg3;
this->getConstraintPtr()->ThirdPos = (Sketcher::PointPos) intArg4;
this->getConstraintPtr()->setValue(Value);
return 0;
}
if (valid) {
this->getConstraintPtr()->First = intArg1;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) intArg2;
this->getConstraintPtr()->Second = intArg3;
this->getConstraintPtr()->SecondPos = (Sketcher::PointPos) intArg4;
this->getConstraintPtr()->setValue(Value);
return 0;
}
}
}
PyErr_Clear();
if (PyArg_ParseTuple(args, "siiiiiO", &ConstraintType, &FirstIndex, &FirstPos, &SecondIndex, &SecondPos, &ThirdIndex, &index_or_value)) {
if (PyInt_Check(index_or_value)) {
ThirdPos = PyInt_AsLong(index_or_value);
// ConstraintType, GeoIndex1, PosIndex1, GeoIndex2, PosIndex2, GeoIndex3, PosIndex3
if (strcmp("Symmetric",ConstraintType) == 0 ) {
this->getConstraintPtr()->Type = Symmetric;
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) FirstPos;
this->getConstraintPtr()->Second = SecondIndex;
this->getConstraintPtr()->SecondPos = (Sketcher::PointPos) SecondPos;
this->getConstraintPtr()->Third = ThirdIndex;
this->getConstraintPtr()->ThirdPos = (Sketcher::PointPos) ThirdPos;
return 0;
}
}
if (PyNumber_Check(index_or_value)) { // can be float or int
Value = PyFloat_AsDouble(index_or_value);
if (strcmp("SnellsLaw",ConstraintType) == 0 ) {
this->getConstraintPtr()->Type = SnellsLaw;
this->getConstraintPtr()->First = FirstIndex;
this->getConstraintPtr()->FirstPos = (Sketcher::PointPos) FirstPos;
this->getConstraintPtr()->Second = SecondIndex;
this->getConstraintPtr()->SecondPos = (Sketcher::PointPos) SecondPos;
this->getConstraintPtr()->Third = ThirdIndex;
this->getConstraintPtr()->ThirdPos = none;
this->getConstraintPtr()->setValue(Value);
return 0;
}
}
}
std::stringstream str;
str << "Invalid parameters: ";
Py::Tuple tuple(args);
str << tuple.as_string() << std::endl;
str << "Constraint constructor accepts:" << std::endl
<< "-- empty parameter list" << std::endl
<< "-- Constraint type and index" << std::endl;
PyErr_SetString(PyExc_TypeError, str.str().c_str());
return -1;
}
QString UnitsSchemaImperialBuilding::schemaTranslate(Base::Quantity quant,double &factor,QString &unitString)
{
// this schema expresses distances in feet + inches + fractions
// ex: 3'- 4 1/4"
Unit unit = quant.getUnit();
if(unit == Unit::Length){
unitString = QString::fromLatin1("in");
factor = 25.4;
double inchValue = std::abs(quant.getValue())/25.4;
int feet = inchValue/12;
double inchPart = inchValue - (double)feet*12;
int inches = (int)inchPart;
double fraction = inchPart - (int)inchPart;
if (fraction > 0.9375) {
inches++;
fraction = 0.0;
}
// if the quantity is too small it is rounded to zero
if (std::abs(quant.getValue()) <= 1.5875)
return QString::fromLatin1("0");
// build representation
std::stringstream output;
if (quant.getValue() < 0)
output << "-";
// feet
if (feet > 0) {
output << feet << "'";
if ( (inches > 0) || (fraction > 0.0625) )
output << " ";
}
// inches
if (inches > 0) {
output << inches;
if (fraction > 0.0625)
output << "+";
else
output << "\"";
}
// fraction
if (fraction <= 0.0625) {}
else if (fraction > 0.8125)
output << "7/8\"";
else if (fraction > 0.6875)
output << "3/4\"";
else if (fraction > 0.5625)
output << "5/8\"";
else if (fraction > 0.4375)
output << "1/2\"";
else if (fraction > 0.3125)
output << "3/8\"";
else if (fraction > 0.1875)
output << "1/4\"";
else
output << "1/8\"";
return QString::fromLatin1(output.str().c_str());
}else if (unit == Unit::Area){
unitString = QString::fromLatin1("sqft");
factor = 92903.04;
}else if (unit == Unit::Volume){
unitString = QString::fromLatin1("cuft");
factor = 28316846.592;
}else{
unitString = quant.getUnit().getString();
factor = 1.0;
}
QLocale Lc = QLocale::system();
Lc.setNumberOptions(Lc.OmitGroupSeparator | Lc.RejectGroupSeparator);
QString Ln = Lc.toString((quant.getValue() / factor), 'f', Base::UnitsApi::getDecimals());
return QString::fromUtf8("%1 %2").arg(Ln).arg(unitString);
}
void EditDatumDialog::exec(bool atCursor)
{
// Return if constraint doesn't have editable value
if (Constr->Type == Sketcher::Distance ||
Constr->Type == Sketcher::DistanceX || Constr->Type == Sketcher::DistanceY ||
Constr->Type == Sketcher::Radius || Constr->Type == Sketcher::Angle) {
if (sketch->hasConflicts()) {
QMessageBox::critical(qApp->activeWindow(), QObject::tr("Distance constraint"),
QObject::tr("Not allowed to edit the datum because the sketch contains conflicting constraints"));
return;
}
Gui::MDIView *mdi = Gui::Application::Instance->activeDocument()->getActiveView();
Gui::View3DInventorViewer *viewer = static_cast<Gui::View3DInventor *>(mdi)->getViewer();
QDialog dlg(viewer->getGLWidget());
Ui::InsertDatum ui_ins_datum;
ui_ins_datum.setupUi(&dlg);
double datum = Constr->Value;
Base::Quantity init_val;
if (Constr->Type == Sketcher::Angle) {
datum = Base::toDegrees<double>(datum);
dlg.setWindowTitle(tr("Insert angle"));
init_val.setUnit(Base::Unit::Angle);
ui_ins_datum.label->setText(tr("Angle:"));
ui_ins_datum.labelEdit->setParamGrpPath(QByteArray("User parameter:BaseApp/History/SketcherAngle"));
}
else if (Constr->Type == Sketcher::Radius) {
dlg.setWindowTitle(tr("Insert radius"));
init_val.setUnit(Base::Unit::Length);
ui_ins_datum.label->setText(tr("Radius:"));
ui_ins_datum.labelEdit->setParamGrpPath(QByteArray("User parameter:BaseApp/History/SketcherLength"));
}
else {
dlg.setWindowTitle(tr("Insert length"));
init_val.setUnit(Base::Unit::Length);
ui_ins_datum.label->setText(tr("Length:"));
ui_ins_datum.labelEdit->setParamGrpPath(QByteArray("User parameter:BaseApp/History/SketcherLength"));
}
//ui_ins_datum.lineEdit->setParamGrpPath("User parameter:History/Sketcher/SetDatum");
if (Constr->Type == Sketcher::Angle ||
((Constr->Type == Sketcher::DistanceX || Constr->Type == Sketcher::DistanceY) &&
Constr->FirstPos == Sketcher::none || Constr->Second != Sketcher::Constraint::GeoUndef))
// hide negative sign
init_val.setValue(std::abs(datum));
else // show negative sign
init_val.setValue(datum);
ui_ins_datum.labelEdit->setValue(init_val);
ui_ins_datum.labelEdit->selectNumber();
if (atCursor)
dlg.setGeometry(QCursor::pos().x() - dlg.geometry().width() / 2, QCursor::pos().y(), dlg.geometry().width(), dlg.geometry().height());
if (dlg.exec()) {
Base::Quantity newQuant = ui_ins_datum.labelEdit->getQuantity();
if (newQuant.isQuantity()) {
// save the value for the history
ui_ins_datum.labelEdit->pushToHistory();
double newDatum = newQuant.getValue();
if (Constr->Type == Sketcher::Angle ||
((Constr->Type == Sketcher::DistanceX || Constr->Type == Sketcher::DistanceY) &&
Constr->FirstPos == Sketcher::none || Constr->Second != Sketcher::Constraint::GeoUndef)) {
// Permit negative values to flip the sign of the constraint
if (newDatum >= 0) // keep the old sign
newDatum = ((datum >= 0) ? 1 : -1) * std::abs(newDatum);
else // flip sign
newDatum = ((datum >= 0) ? -1 : 1) * std::abs(newDatum);
}
try {
Gui::Command::openCommand("Modify sketch constraints");
Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.setDatum(%i,App.Units.Quantity('%f %s'))",
sketch->getNameInDocument(),
ConstrNbr, newDatum, (const char*)newQuant.getUnit().getString().toUtf8());
Gui::Command::commitCommand();
Gui::Command::updateActive();
}
catch (const Base::Exception& e) {
QMessageBox::critical(qApp->activeWindow(), QObject::tr("Dimensional constraint"), QString::fromUtf8(e.what()));
Gui::Command::abortCommand();
}
}
}
}
}
Base::Quantity validateAndInterpret(QString& input, int& pos, QValidator::State& state) const
{
Base::Quantity res;
const double max = this->maximum;
const double min = this->minimum;
QString copy = input;
int len = copy.size();
const bool plus = max >= 0;
const bool minus = min <= 0;
switch (len) {
case 0:
state = max != min ? QValidator::Intermediate : QValidator::Invalid;
goto end;
case 1:
if (copy.at(0) == locale.decimalPoint()) {
state = QValidator::Intermediate;
copy.prepend(QLatin1Char('0'));
pos++;
len++;
goto end;
}
else if (copy.at(0) == QLatin1Char('+')) {
// the quantity parser doesn't allow numbers of the form '+1.0'
state = QValidator::Invalid;
goto end;
}
else if (copy.at(0) == QLatin1Char('-')) {
if (minus)
state = QValidator::Intermediate;
else
state = QValidator::Invalid;
goto end;
}
break;
case 2:
if (copy.at(1) == locale.decimalPoint()
&& (plus && copy.at(0) == QLatin1Char('+'))) {
state = QValidator::Intermediate;
goto end;
}
if (copy.at(1) == locale.decimalPoint()
&& (minus && copy.at(0) == QLatin1Char('-'))) {
state = QValidator::Intermediate;
copy.insert(1, QLatin1Char('0'));
pos++;
len++;
goto end;
}
break;
default:
break;
}
{
if (copy.at(0) == locale.groupSeparator()) {
state = QValidator::Invalid;
goto end;
}
else if (len > 1) {
const int dec = copy.indexOf(locale.decimalPoint());
if (dec != -1) {
if (dec + 1 < copy.size() && copy.at(dec + 1) == locale.decimalPoint() && pos == dec + 1) {
copy.remove(dec + 1, 1);
}
else if (copy.indexOf(locale.decimalPoint(), dec + 1) != -1) {
// trying to add a second decimal point is not allowed
state = QValidator::Invalid;
goto end;
}
for (int i=dec + 1; i<copy.size(); ++i) {
// a group separator after the decimal point is not allowed
if (copy.at(i) == locale.groupSeparator()) {
state = QValidator::Invalid;
goto end;
}
}
}
}
bool ok = false;
double value = min;
if (locale.negativeSign() != QLatin1Char('-'))
copy.replace(locale.negativeSign(), QLatin1Char('-'));
if (locale.positiveSign() != QLatin1Char('+'))
copy.replace(locale.positiveSign(), QLatin1Char('+'));
try {
QString copy2 = copy;
copy2.remove(locale.groupSeparator());
res = Base::Quantity::parse(copy2);
value = res.getValue();
ok = true;
}
catch (Base::Exception&) {
}
if (!ok) {
// input may not be finished
state = QValidator::Intermediate;
}
else if (value >= min && value <= max) {
if (copy.endsWith(locale.decimalPoint())) {
// input shouldn't end with a decimal point
state = QValidator::Intermediate;
}
else if (res.getUnit().isEmpty() && !this->unit.isEmpty()) {
// if not dimensionless the input should have a dimension
state = QValidator::Intermediate;
}
else if (res.getUnit() != this->unit) {
state = QValidator::Invalid;
}
else {
state = QValidator::Acceptable;
}
}
else if (max == min) { // when max and min is the same the only non-Invalid input is max (or min)
state = QValidator::Invalid;
}
else {
if ((value >= 0 && value > max) || (value < 0 && value < min)) {
state = QValidator::Invalid;
}
else {
state = QValidator::Intermediate;
}
}
}
end:
if (state != QValidator::Acceptable) {
res.setValue(max > 0 ? min : max);
}
input = copy;
return res;
}
void QuantitySpinBox::setUnitText(const QString& str)
{
Base::Quantity quant = Base::Quantity::parse(str);
setUnit(quant.getUnit());
}
QString UnitsSchemaImperialDecimal::schemaTranslate(const Base::Quantity& quant, double &factor, QString &unitString)
{
double UnitValue = std::abs(quant.getValue());
Unit unit = quant.getUnit();
// for imperial user/programmer mind; UnitValue is in internal system, that means
// mm/kg/s. And all combined units have to be calculated from there!
// now do special treatment on all cases seems necessary:
if (unit == Unit::Length) { // Length handling ============================
if (UnitValue < 0.00000254) {// smaller then 0.001 thou -> inch and scientific notation
unitString = QString::fromLatin1("in");
factor = 25.4;
//}else if(UnitValue < 2.54){ // smaller then 0.1 inch -> Thou (mil)
// unitString = QString::fromLatin1("thou");
// factor = 0.0254;
}
else { // bigger then 1000 mi -> scientific notation
unitString = QString::fromLatin1("in");
factor = 25.4;
}
}
else if (unit == Unit::Area) {
// TODO Cascade for the Areas
// default action for all cases without special treatment:
unitString = QString::fromLatin1("in^2");
factor = 645.16;
}
else if (unit == Unit::Volume) {
// TODO Cascade for the Volume
// default action for all cases without special treatment:
unitString = QString::fromLatin1("in^3");
factor = 16387.064;
}
else if (unit == Unit::Mass) {
// TODO Cascade for the weights
// default action for all cases without special treatment:
unitString = QString::fromLatin1("lb");
factor = 0.45359237;
}
else if (unit == Unit::Pressure) {
if (UnitValue < 6894.744) {// psi is the smallest
unitString = QString::fromLatin1("psi");
factor = 6.894744825494;
}
else { // bigger then 1000 ksi -> psi + scientific notation
unitString = QString::fromLatin1("psi");
factor = 6.894744825494;
}
}
else if (unit == Unit::Velocity) {
unitString = QString::fromLatin1("in/min");
factor = 25.4/60;
}
else {
// default action for all cases without special treatment:
unitString = quant.getUnit().getString();
factor = 1.0;
}
return toLocale(quant, factor, unitString);
}
QString UnitsSchemaImperial1::schemaTranslate(Base::Quantity quant,double &factor,QString &unitString)
{
double UnitValue = std::abs(quant.getValue());
Unit unit = quant.getUnit();
// for imperial user/programmer mind; UnitValue is in internal system, that means
// mm/kg/s. And all combined units have to be calculated from there!
// now do special treatment on all cases seems necessary:
if(unit == Unit::Length){ // Length handling ============================
if(UnitValue < 0.00000254){// smaller then 0.001 thou -> inch and scientific notation
unitString = QString::fromLatin1("in");
factor = 25.4;
}else if(UnitValue < 2.54){ // smaller then 0.1 inch -> Thou (mil)
unitString = QString::fromLatin1("thou");
factor = 0.0254;
}else if(UnitValue < 304.8){
unitString = QString::fromLatin1("\"");
factor = 25.4;
}else if(UnitValue < 914.4){
unitString = QString::fromLatin1("\'");
factor = 304.8;
}else if(UnitValue < 1609344.0){
unitString = QString::fromLatin1("yd");
factor = 914.4;
}else if(UnitValue < 1609344000.0 ){
unitString = QString::fromLatin1("mi");
factor = 1609344.0;
}else{ // bigger then 1000 mi -> scientific notation
unitString = QString::fromLatin1("in");
factor = 25.4;
}
}else if (unit == Unit::Area){
// TODO Cascade for the Areas
// default action for all cases without special treatment:
unitString = QString::fromLatin1("in^2");
factor = 645.16;
}else if (unit == Unit::Volume){
// TODO Cascade for the Volume
// default action for all cases without special treatment:
unitString = QString::fromLatin1("in^3");
factor = 16387.064;
}else if (unit == Unit::Mass){
// TODO Cascade for the wights
// default action for all cases without special treatment:
unitString = QString::fromLatin1("lb");
factor = 0.45359237;
}else if (unit == Unit::Pressure){
if(UnitValue < 145.038){// psi is the smallest
unitString = QString::fromLatin1("psi");
factor = 0.145038;
}else if(UnitValue < 145038){
unitString = QString::fromLatin1("ksi");
factor = 145.038;
}else{ // bigger then 1000 ksi -> psi + scientific notation
unitString = QString::fromLatin1("psi");
factor = 0.145038;
}
}else{
// default action for all cases without special treatment:
unitString = quant.getUnit().getString();
factor = 1.0;
}
return QString::fromLatin1("%L1 %2").arg(quant.getValue() / factor).arg(unitString);
}
