Exemplo n.º 1
0
void ValueEnumerator::incorporateFunction(const Function &F) {
  InstructionCount = 0;
  NumModuleValues = Values.size();
  NumModuleMDs = MDs.size();

  // Adding function arguments to the value table.
  for (Function::const_arg_iterator I = F.arg_begin(), E = F.arg_end();
       I != E; ++I)
    EnumerateValue(I);

  FirstFuncConstantID = Values.size();

  // Add all function-level constants to the value table.
  for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
    for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I)
      for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
           OI != E; ++OI) {
        if ((isa<Constant>(*OI) && !isa<GlobalValue>(*OI)) ||
            isa<InlineAsm>(*OI))
          EnumerateValue(*OI);
      }
    BasicBlocks.push_back(BB);
    ValueMap[BB] = BasicBlocks.size();
  }

  // Optimize the constant layout.
  OptimizeConstants(FirstFuncConstantID, Values.size());

  // Add the function's parameter attributes so they are available for use in
  // the function's instruction.
  EnumerateAttributes(F.getAttributes());

  FirstInstID = Values.size();

  SmallVector<LocalAsMetadata *, 8> FnLocalMDVector;
  // Add all of the instructions.
  for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
    for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
      for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
           OI != E; ++OI) {
        if (auto *MD = dyn_cast<MetadataAsValue>(&*OI))
          if (auto *Local = dyn_cast<LocalAsMetadata>(MD->getMetadata()))
            // Enumerate metadata after the instructions they might refer to.
            FnLocalMDVector.push_back(Local);
      }

      if (!I->getType()->isVoidTy())
        EnumerateValue(I);
    }
  }

  // Add all of the function-local metadata.
  for (unsigned i = 0, e = FnLocalMDVector.size(); i != e; ++i)
    EnumerateFunctionLocalMetadata(FnLocalMDVector[i]);
}
Exemplo n.º 2
0
/// isUsedInBasicBlock - Return true if this value is used in the specified
/// basic block.
bool Value::isUsedInBasicBlock(const BasicBlock *BB) const {
  // This can be computed either by scanning the instructions in BB, or by
  // scanning the use list of this Value. Both lists can be very long, but
  // usually one is quite short.
  //
  // Scan both lists simultaneously until one is exhausted. This limits the
  // search to the shorter list.
  BasicBlock::const_iterator BI = BB->begin(), BE = BB->end();
  const_user_iterator UI = user_begin(), UE = user_end();
  for (; BI != BE && UI != UE; ++BI, ++UI) {
    // Scan basic block: Check if this Value is used by the instruction at BI.
    if (std::find(BI->op_begin(), BI->op_end(), this) != BI->op_end())
      return true;
    // Scan use list: Check if the use at UI is in BB.
    const Instruction *User = dyn_cast<Instruction>(*UI);
    if (User && User->getParent() == BB)
      return true;
  }
  return false;
}
Exemplo n.º 3
0
/// isUsedInBasicBlock - Return true if this value is used in the specified
/// basic block.
bool Value::isUsedInBasicBlock(const BasicBlock *BB) const {
  // Start by scanning over the instructions looking for a use before we start
  // the expensive use iteration.
  unsigned MaxBlockSize = 3;
  for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E; ++I) {
    if (std::find(I->op_begin(), I->op_end(), this) != I->op_end())
      return true;
    if (MaxBlockSize-- == 0) // If the block is larger fall back to use_iterator
      break;
  }

  if (MaxBlockSize != 0) // We scanned the entire block and found no use.
    return false;

  for (const_use_iterator I = use_begin(), E = use_end(); I != E; ++I) {
    const Instruction *User = dyn_cast<Instruction>(*I);
    if (User && User->getParent() == BB)
      return true;
  }
  return false;
}
void NaClValueEnumerator::incorporateFunction(const Function &F) {
  InstructionCount = 0;
  NumModuleValues = Values.size();

  // Make sure no insertions outside of a function.
  assert(FnForwardTypeRefs.empty());

  // Adding function arguments to the value table.
  for (Function::const_arg_iterator I = F.arg_begin(), E = F.arg_end();
       I != E; ++I)
    EnumerateValue(I);

  FirstFuncConstantID = Values.size();

  // Add all function-level constants to the value table.
  for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
    for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
      if (const SwitchInst *SI = dyn_cast<SwitchInst>(I)) {
        // Handle switch instruction specially, so that we don't write
        // out unnecessary vector/array constants used to model case selectors.
        if (isa<Constant>(SI->getCondition())) {
          EnumerateValue(SI->getCondition());
        }
      } else {
        for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
             OI != E; ++OI) {
          if ((isa<Constant>(*OI) && !isa<GlobalValue>(*OI)) ||
              isa<InlineAsm>(*OI))
            EnumerateValue(*OI);
        }
      }
    }
    BasicBlocks.push_back(BB);
    ValueMap[BB] = BasicBlocks.size();
  }

  // Optimize the constant layout.
  OptimizeConstants(FirstFuncConstantID, Values.size());

  FirstInstID = Values.size();

  // Add all of the instructions.
  for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
    for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
      if (!I->getType()->isVoidTy())
        EnumerateValue(I);
    }
  }
}
Exemplo n.º 5
0
void ValueEnumerator::incorporateFunction(const Function &F) {
  NumModuleValues = Values.size();

  // Adding function arguments to the value table.
  for(Function::const_arg_iterator I = F.arg_begin(), E = F.arg_end();
      I != E; ++I)
    EnumerateValue(I);

  FirstFuncConstantID = Values.size();

  // Add all function-level constants to the value table.
  for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
    for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I)
      for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
           OI != E; ++OI) {
        if ((isa<Constant>(*OI) && !isa<GlobalValue>(*OI)) ||
            isa<InlineAsm>(*OI))
          EnumerateValue(*OI);
      }
    BasicBlocks.push_back(BB);
    ValueMap[BB] = BasicBlocks.size();
  }

  // Optimize the constant layout.
  OptimizeConstants(FirstFuncConstantID, Values.size());

  // Add the function's parameter attributes so they are available for use in
  // the function's instruction.
  EnumerateAttributes(F.getAttributes());

  FirstInstID = Values.size();

  // Add all of the instructions.
  for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
    for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
      if (I->getType() != Type::getVoidTy(F.getContext()))
        EnumerateValue(I);
    }
  }
}
/// NaClValueEnumerator - Enumerate module-level information.
NaClValueEnumerator::NaClValueEnumerator(const Module *M) {
  // Create map for counting frequency of types, and set field
  // TypeCountMap accordingly.  Note: Pointer field TypeCountMap is
  // used to deal with the fact that types are added through various
  // method calls in this routine. Rather than pass it as an argument,
  // we use a field. The field is a pointer so that the memory
  // footprint of count_map can be garbage collected when this
  // constructor completes.
  TypeCountMapType count_map;
  TypeCountMap = &count_map;

  IntPtrType = IntegerType::get(M->getContext(), PNaClIntPtrTypeBitSize);

  // Enumerate the functions. Note: We do this before global
  // variables, so that global variable initializations can refer to
  // the functions without a forward reference.
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
    EnumerateValue(I);
  }

  // Enumerate the global variables.
  FirstGlobalVarID = Values.size();
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    EnumerateValue(I);
  NumGlobalVarIDs = Values.size() - FirstGlobalVarID;

  // Enumerate the aliases.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I);

  // Remember what is the cutoff between globalvalue's and other constants.
  unsigned FirstConstant = Values.size();

  // Skip global variable initializers since they are handled within
  // WriteGlobalVars of file NaClBitcodeWriter.cpp.

  // Enumerate the aliasees.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I->getAliasee());

  // Insert constants that are named at module level into the slot
  // pool so that the module symbol table can refer to them...
  EnumerateValueSymbolTable(M->getValueSymbolTable());

  // Enumerate types used by function bodies and argument lists.
  for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {

    for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
         I != E; ++I)
      EnumerateType(I->getType());

    for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
      for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
        // Don't generate types for elided pointer casts!
        if (IsElidedCast(I))
          continue;

        if (const SwitchInst *SI = dyn_cast<SwitchInst>(I)) {
          // Handle switch instruction specially, so that we don't
          // write out unnecessary vector/array types used to model case
          // selectors.
          EnumerateOperandType(SI->getCondition());
        } else {
          for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
               OI != E; ++OI) {
            EnumerateOperandType(*OI);
          }
        }
        EnumerateType(I->getType());
      }
  }

  // Optimized type indicies to put "common" expected types in with small
  // indices.
  OptimizeTypes(M);
  TypeCountMap = NULL;

  // Optimize constant ordering.
  OptimizeConstants(FirstConstant, Values.size());
}
Exemplo n.º 7
0
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
  // Enumerate the global variables.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    EnumerateValue(I);

  // Enumerate the functions.
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
    EnumerateValue(I);
    EnumerateAttributes(cast<Function>(I)->getAttributes());
  }

  // Enumerate the aliases.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I);

  // Remember what is the cutoff between globalvalue's and other constants.
  unsigned FirstConstant = Values.size();

  // Enumerate the global variable initializers.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    if (I->hasInitializer())
      EnumerateValue(I->getInitializer());

  // Enumerate the aliasees.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I->getAliasee());

  // Insert constants and metadata that are named at module level into the slot
  // pool so that the module symbol table can refer to them...
  EnumerateValueSymbolTable(M->getValueSymbolTable());
  EnumerateNamedMetadata(M);

  SmallVector<std::pair<unsigned, MDNode*>, 8> MDs;

  // Enumerate types used by function bodies and argument lists.
  for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {

    for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
         I != E; ++I)
      EnumerateType(I->getType());

    for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
      for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
        for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
             OI != E; ++OI) {
          if (MDNode *MD = dyn_cast<MDNode>(*OI))
            if (MD->isFunctionLocal() && MD->getFunction())
              // These will get enumerated during function-incorporation.
              continue;
          EnumerateOperandType(*OI);
        }
        EnumerateType(I->getType());
        if (const CallInst *CI = dyn_cast<CallInst>(I))
          EnumerateAttributes(CI->getAttributes());
        else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
          EnumerateAttributes(II->getAttributes());

        // Enumerate metadata attached with this instruction.
        MDs.clear();
        I->getAllMetadataOtherThanDebugLoc(MDs);
        for (unsigned i = 0, e = MDs.size(); i != e; ++i)
          EnumerateMetadata(MDs[i].second);

        if (!I->getDebugLoc().isUnknown()) {
          MDNode *Scope, *IA;
          I->getDebugLoc().getScopeAndInlinedAt(Scope, IA, I->getContext());
          if (Scope) EnumerateMetadata(Scope);
          if (IA) EnumerateMetadata(IA);
        }
      }
  }

  // Optimize constant ordering.
  OptimizeConstants(FirstConstant, Values.size());
}
Exemplo n.º 8
0
/// NaClValueEnumerator - Enumerate module-level information.
NaClValueEnumerator::NaClValueEnumerator(const Module *M) {
  // Create map for counting frequency of types, and set field
  // TypeCountMap accordingly.  Note: Pointer field TypeCountMap is
  // used to deal with the fact that types are added through various
  // method calls in this routine. Rather than pass it as an argument,
  // we use a field. The field is a pointer so that the memory
  // footprint of count_map can be garbage collected when this
  // constructor completes.
  TypeCountMapType count_map;
  TypeCountMap = &count_map;
  // Enumerate the global variables.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    EnumerateValue(I);

  // Enumerate the functions.
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
    EnumerateValue(I);
    EnumerateAttributes(cast<Function>(I)->getAttributes());
  }

  // Enumerate the aliases.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I);

  // Remember what is the cutoff between globalvalue's and other constants.
  unsigned FirstConstant = Values.size();

  // Enumerate the global variable initializers.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    if (I->hasInitializer())
      EnumerateValue(I->getInitializer());

  // Enumerate the aliasees.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I->getAliasee());

  // Insert constants and metadata that are named at module level into the slot
  // pool so that the module symbol table can refer to them...
  EnumerateValueSymbolTable(M->getValueSymbolTable());
  EnumerateNamedMetadata(M);

  SmallVector<std::pair<unsigned, MDNode*>, 8> MDs;

  // Enumerate types used by function bodies and argument lists.
  for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {

    for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
         I != E; ++I)
      EnumerateType(I->getType());

    for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
      for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
        for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
             OI != E; ++OI) {
          if (MDNode *MD = dyn_cast<MDNode>(*OI))
            if (MD->isFunctionLocal() && MD->getFunction())
              // These will get enumerated during function-incorporation.
              continue;
          EnumerateOperandType(*OI);
        }
        EnumerateType(I->getType());
        if (const CallInst *CI = dyn_cast<CallInst>(I))
          EnumerateAttributes(CI->getAttributes());
        else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
          EnumerateAttributes(II->getAttributes());

        // Enumerate metadata attached with this instruction.
        MDs.clear();
        I->getAllMetadataOtherThanDebugLoc(MDs);
        for (unsigned i = 0, e = MDs.size(); i != e; ++i)
          EnumerateMetadata(MDs[i].second);

        if (!I->getDebugLoc().isUnknown()) {
          MDNode *Scope, *IA;
          I->getDebugLoc().getScopeAndInlinedAt(Scope, IA, I->getContext());
          if (Scope) EnumerateMetadata(Scope);
          if (IA) EnumerateMetadata(IA);
        }
      }
  }

  // Optimized type indicies to put "common" expected types in with small
  // indices.
  OptimizeTypes(M);
  TypeCountMap = NULL;

  // Optimize constant ordering.
  OptimizeConstants(FirstConstant, Values.size());
}
Exemplo n.º 9
0
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
  InstructionCount = 0;

  // Enumerate the global variables.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    EnumerateValue(I);

  // Enumerate the functions.
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
    EnumerateValue(I);
    EnumerateAttributes(cast<Function>(I)->getAttributes());
  }

  // Enumerate the aliases.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I);

  // Remember what is the cutoff between globalvalue's and other constants.
  unsigned FirstConstant = Values.size();

  // Enumerate the global variable initializers.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    if (I->hasInitializer())
      EnumerateValue(I->getInitializer());

  // Enumerate the aliasees.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I->getAliasee());

  // Enumerate types used by the type symbol table.
  EnumerateTypeSymbolTable(M->getTypeSymbolTable());

  // Insert constants that are named at module level into the slot pool so that
  // the module symbol table can refer to them...
  EnumerateValueSymbolTable(M->getValueSymbolTable());

  // Enumerate types used by function bodies and argument lists.
  for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {

    for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
         I != E; ++I)
      EnumerateType(I->getType());

    MetadataContext &TheMetadata = F->getContext().getMetadata();
    typedef SmallVector<std::pair<unsigned, TrackingVH<MDNode> >, 2> MDMapTy;
    MDMapTy MDs;
    for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
      for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
        for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
             OI != E; ++OI)
          EnumerateOperandType(*OI);
        EnumerateType(I->getType());
        if (const CallInst *CI = dyn_cast<CallInst>(I))
          EnumerateAttributes(CI->getAttributes());
        else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
          EnumerateAttributes(II->getAttributes());

        // Enumerate metadata attached with this instruction.
        MDs.clear();
        TheMetadata.getMDs(I, MDs);
        for (MDMapTy::const_iterator MI = MDs.begin(), ME = MDs.end(); MI != ME;
             ++MI)
          EnumerateMetadata(MI->second);
      }
  }

  // Optimize constant ordering.
  OptimizeConstants(FirstConstant, Values.size());

  // Sort the type table by frequency so that most commonly used types are early
  // in the table (have low bit-width).
  std::stable_sort(Types.begin(), Types.end(), CompareByFrequency);

  // Partition the Type ID's so that the single-value types occur before the
  // aggregate types.  This allows the aggregate types to be dropped from the
  // type table after parsing the global variable initializers.
  std::partition(Types.begin(), Types.end(), isSingleValueType);

  // Now that we rearranged the type table, rebuild TypeMap.
  for (unsigned i = 0, e = Types.size(); i != e; ++i)
    TypeMap[Types[i].first] = i+1;
}
Exemplo n.º 10
0
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
  // Enumerate the global variables.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    EnumerateValue(I);

  // Enumerate the functions.
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
    EnumerateValue(I);
    EnumerateParamAttrs(cast<Function>(I)->getParamAttrs());
  }

  // Enumerate the aliases.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I);
  
  // Remember what is the cutoff between globalvalue's and other constants.
  unsigned FirstConstant = Values.size();
  
  // Enumerate the global variable initializers.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    if (I->hasInitializer())
      EnumerateValue(I->getInitializer());

  // Enumerate the aliasees.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I->getAliasee());
  
  // Enumerate types used by the type symbol table.
  EnumerateTypeSymbolTable(M->getTypeSymbolTable());

  // Insert constants that are named at module level into the slot pool so that
  // the module symbol table can refer to them...
  EnumerateValueSymbolTable(M->getValueSymbolTable());
  
  // Enumerate types used by function bodies and argument lists.
  for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
    
    for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
         I != E; ++I)
      EnumerateType(I->getType());
    
    for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
      for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
        for (User::const_op_iterator OI = I->op_begin(), E = I->op_end(); 
             OI != E; ++OI)
          EnumerateOperandType(*OI);
        EnumerateType(I->getType());
        if (const CallInst *CI = dyn_cast<CallInst>(I))
          EnumerateParamAttrs(CI->getParamAttrs());
        else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
          EnumerateParamAttrs(II->getParamAttrs());
      }
  }
  
  // Optimize constant ordering.
  OptimizeConstants(FirstConstant, Values.size());
    
  // Sort the type table by frequency so that most commonly used types are early
  // in the table (have low bit-width).
  std::stable_sort(Types.begin(), Types.end(), CompareByFrequency);
    
  // Partition the Type ID's so that the first-class types occur before the
  // aggregate types.  This allows the aggregate types to be dropped from the
  // type table after parsing the global variable initializers.
  std::partition(Types.begin(), Types.end(), isFirstClassType);

  // Now that we rearranged the type table, rebuild TypeMap.
  for (unsigned i = 0, e = Types.size(); i != e; ++i)
    TypeMap[Types[i].first] = i+1;
}
Exemplo n.º 11
0
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
  // Enumerate the global variables.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    EnumerateValue(I);

  // Enumerate the functions.
  for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
    EnumerateValue(I);
    EnumerateAttributes(cast<Function>(I)->getAttributes());
  }

  // Enumerate the aliases.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I);

  // Remember what is the cutoff between globalvalue's and other constants.
  unsigned FirstConstant = Values.size();

  // Enumerate the global variable initializers.
  for (Module::const_global_iterator I = M->global_begin(),
         E = M->global_end(); I != E; ++I)
    if (I->hasInitializer())
      EnumerateValue(I->getInitializer());

  // Enumerate the aliasees.
  for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
       I != E; ++I)
    EnumerateValue(I->getAliasee());

  // Enumerate types used by the type symbol table.
  EnumerateTypeSymbolTable(M->getTypeSymbolTable());

  // Insert constants and metadata that are named at module level into the slot 
  // pool so that the module symbol table can refer to them...
  EnumerateValueSymbolTable(M->getValueSymbolTable());
  EnumerateNamedMetadata(M);

  SmallVector<std::pair<unsigned, MDNode*>, 8> MDs;

  // Enumerate types used by function bodies and argument lists.
  for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {

    for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
         I != E; ++I)
      EnumerateType(I->getType());

    for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
      for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
        for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
             OI != E; ++OI) {
          if (MDNode *MD = dyn_cast<MDNode>(*OI))
            if (MD->isFunctionLocal() && MD->getFunction())
              // These will get enumerated during function-incorporation.
              continue;
          EnumerateOperandType(*OI);
        }
        EnumerateType(I->getType());
        if (const CallInst *CI = dyn_cast<CallInst>(I))
          EnumerateAttributes(CI->getAttributes());
        else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
          EnumerateAttributes(II->getAttributes());

        // Enumerate metadata attached with this instruction.
        MDs.clear();
        I->getAllMetadataOtherThanDebugLoc(MDs);
        for (unsigned i = 0, e = MDs.size(); i != e; ++i)
          EnumerateMetadata(MDs[i].second);
        
        if (!I->getDebugLoc().isUnknown()) {
          MDNode *Scope, *IA;
          I->getDebugLoc().getScopeAndInlinedAt(Scope, IA, I->getContext());
          if (Scope) EnumerateMetadata(Scope);
          if (IA) EnumerateMetadata(IA);
        }
      }
  }

  // Optimize constant ordering.
  OptimizeConstants(FirstConstant, Values.size());

  // Sort the type table by frequency so that most commonly used types are early
  // in the table (have low bit-width).
  std::stable_sort(Types.begin(), Types.end(), CompareByFrequency);

  // Partition the Type ID's so that the single-value types occur before the
  // aggregate types.  This allows the aggregate types to be dropped from the
  // type table after parsing the global variable initializers.
  std::partition(Types.begin(), Types.end(), isSingleValueType);

  // Now that we rearranged the type table, rebuild TypeMap.
  for (unsigned i = 0, e = Types.size(); i != e; ++i)
    TypeMap[Types[i].first] = i+1;
}