void ValueEnumerator::incorporateFunction(const Function &F) {
InstructionCount = 0;
NumModuleValues = Values.size();
NumModuleMDs = MDs.size();
// Adding function arguments to the value table.
for (Function::const_arg_iterator I = F.arg_begin(), E = F.arg_end();
I != E; ++I)
EnumerateValue(I);
FirstFuncConstantID = Values.size();
// Add all function-level constants to the value table.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I)
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if ((isa<Constant>(*OI) && !isa<GlobalValue>(*OI)) ||
isa<InlineAsm>(*OI))
EnumerateValue(*OI);
}
BasicBlocks.push_back(BB);
ValueMap[BB] = BasicBlocks.size();
}
// Optimize the constant layout.
OptimizeConstants(FirstFuncConstantID, Values.size());
// Add the function's parameter attributes so they are available for use in
// the function's instruction.
EnumerateAttributes(F.getAttributes());
FirstInstID = Values.size();
SmallVector<LocalAsMetadata *, 8> FnLocalMDVector;
// Add all of the instructions.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if (auto *MD = dyn_cast<MetadataAsValue>(&*OI))
if (auto *Local = dyn_cast<LocalAsMetadata>(MD->getMetadata()))
// Enumerate metadata after the instructions they might refer to.
FnLocalMDVector.push_back(Local);
}
if (!I->getType()->isVoidTy())
EnumerateValue(I);
}
}
// Add all of the function-local metadata.
for (unsigned i = 0, e = FnLocalMDVector.size(); i != e; ++i)
EnumerateFunctionLocalMetadata(FnLocalMDVector[i]);
}
void NaClValueEnumerator::incorporateFunction(const Function &F) {
InstructionCount = 0;
NumModuleValues = Values.size();
// Make sure no insertions outside of a function.
assert(FnForwardTypeRefs.empty());
// Adding function arguments to the value table.
for (Function::const_arg_iterator I = F.arg_begin(), E = F.arg_end();
I != E; ++I)
EnumerateValue(I);
FirstFuncConstantID = Values.size();
// Add all function-level constants to the value table.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
if (const SwitchInst *SI = dyn_cast<SwitchInst>(I)) {
// Handle switch instruction specially, so that we don't write
// out unnecessary vector/array constants used to model case selectors.
if (isa<Constant>(SI->getCondition())) {
EnumerateValue(SI->getCondition());
}
} else {
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if ((isa<Constant>(*OI) && !isa<GlobalValue>(*OI)) ||
isa<InlineAsm>(*OI))
EnumerateValue(*OI);
}
}
}
BasicBlocks.push_back(BB);
ValueMap[BB] = BasicBlocks.size();
}
// Optimize the constant layout.
OptimizeConstants(FirstFuncConstantID, Values.size());
FirstInstID = Values.size();
// Add all of the instructions.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
if (!I->getType()->isVoidTy())
EnumerateValue(I);
}
}
}
// Collect allocas
void AllocaManager::collectMarkedAllocas() {
NamedRegionTimer Timer("Collect Marked Allocas", "AllocaManager",
TimePassesIsEnabled);
// Weird semantics: If an alloca *ever* appears in a lifetime start or end
// within the same function, its lifetime begins only at the explicit lifetime
// starts and ends only at the explicit lifetime ends and function exit
// points. Otherwise, its lifetime begins in the entry block and it is live
// everywhere.
//
// And so, instead of just walking the entry block to find all the static
// allocas, we walk the whole body to find the intrinsics so we can find the
// set of static allocas referenced in the intrinsics.
for (Function::const_iterator FI = F->begin(), FE = F->end();
FI != FE; ++FI) {
for (BasicBlock::const_iterator BI = FI->begin(), BE = FI->end();
BI != BE; ++BI) {
const CallInst *CI = dyn_cast<CallInst>(BI);
if (!CI) continue;
const Value *Callee = CI->getCalledValue();
if (Callee == LifetimeStart || Callee == LifetimeEnd) {
if (const Value *Ptr = getPointerFromIntrinsic(CI)) {
if (const AllocaInst *AI = isFavorableAlloca(Ptr))
Allocas.insert(std::make_pair(AI, 0));
} else if (isa<Instruction>(CI->getArgOperand(1)->stripPointerCasts())) {
// Oh noes, There's a lifetime intrinsics with something that
// doesn't appear to resolve to an alloca. This means that it's
// possible that it may be declaring a lifetime for some escaping
// alloca. Look out!
Allocas.clear();
assert(AllocasByIndex.empty());
return;
}
}
}
}
// All that said, we still want the intrinsics in the order they appear in the
// block, so that we can represent later ones with earlier ones and skip
// worrying about dominance, so run through the entry block and index those
// allocas which we identified above.
AllocasByIndex.reserve(Allocas.size());
const BasicBlock *EntryBB = &F->getEntryBlock();
for (BasicBlock::const_iterator BI = EntryBB->begin(), BE = EntryBB->end();
BI != BE; ++BI) {
const AllocaInst *AI = dyn_cast<AllocaInst>(BI);
if (!AI || !AI->isStaticAlloca()) continue;
AllocaMap::iterator I = Allocas.find(AI);
if (I != Allocas.end()) {
I->second = AllocasByIndex.size();
AllocasByIndex.push_back(getInfo(AI));
}
}
assert(AllocasByIndex.size() == Allocas.size());
}
void ValueEnumerator::incorporateFunction(const Function &F) {
NumModuleValues = Values.size();
// Adding function arguments to the value table.
for(Function::const_arg_iterator I = F.arg_begin(), E = F.arg_end();
I != E; ++I)
EnumerateValue(I);
FirstFuncConstantID = Values.size();
// Add all function-level constants to the value table.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I)
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if ((isa<Constant>(*OI) && !isa<GlobalValue>(*OI)) ||
isa<InlineAsm>(*OI))
EnumerateValue(*OI);
}
BasicBlocks.push_back(BB);
ValueMap[BB] = BasicBlocks.size();
}
// Optimize the constant layout.
OptimizeConstants(FirstFuncConstantID, Values.size());
// Add the function's parameter attributes so they are available for use in
// the function's instruction.
EnumerateAttributes(F.getAttributes());
FirstInstID = Values.size();
// Add all of the instructions.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB) {
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E; ++I) {
if (I->getType() != Type::getVoidTy(F.getContext()))
EnumerateValue(I);
}
}
}
set<Strator::StratorWorker::LockSet>& Strator::StratorWorker::traverseFunction(const Function& f, LockSet lockSet){
#ifdef DETAILED_DEBUG
cerr << " Traversing: " << f.getName().str() << endl;
#endif
if("signal_threads" == f.getName().str())
cerr << "signal" << endl;
/// This should be OK even if not thread safe
//TODO: Ali: why OK if not thread safe ?!
parent->functionMap[f.getName().str()] = true;
/// If the size of a basic block is 0, then we are in a function declaration.
if (f.size() == 0){
set<StratorWorker::LockSet>* emptySet = new set<StratorWorker::LockSet>();
return *emptySet;
}
StratorFunction* sFunc = getStratorFunction(&f);
/// Check if the function is in the cache
vector<FunctionCacheEntry>::iterator it;
for(it = sFunc->functionCache.functionCacheEntries.begin();
it != sFunc->functionCache.functionCacheEntries.end(); ++it){
if(it->entryLockSet == lockSet){
return it->exitLockSets;
}
}
/// Simply ignore recursion
if(sFunc->onStack){
set<StratorWorker::LockSet>* emptySet = new set<StratorWorker::LockSet>();
return *emptySet;
}
sFunc->onStack= true;
/// The function was not in the cache, so a new cache entry is being created for it
FunctionCacheEntry* functionCacheEntry = new FunctionCacheEntry();
functionCacheEntry->entryLockSet = lockSet;
/// Start traversing the statements with the beginning statement of the function
Function::const_iterator firstBB = f.begin();
BasicBlock::const_iterator firstInstr = firstBB->begin();
functionCacheEntry->exitLockSets = traverseStatement(f, firstInstr, lockSet, lockSet);
/// We processes the current function, it is no longer on the stack
sFunc->onStack= false;
/// Add the exit lockset to the summary cache
sFunc->functionCache.functionCacheEntries.push_back(*functionCacheEntry);
return functionCacheEntry->exitLockSets;
}
void TypeFinder::Run(const Module &M) {
AddModuleTypesToPrinter(TP,&M);
// Get types from the type symbol table. This gets opaque types referened
// only through derived named types.
const TypeSymbolTable &ST = M.getTypeSymbolTable();
for (TypeSymbolTable::const_iterator TI = ST.begin(), E = ST.end();
TI != E; ++TI)
IncorporateType(TI->second);
// Get types from global variables.
for (Module::const_global_iterator I = M.global_begin(),
E = M.global_end(); I != E; ++I) {
IncorporateType(I->getType());
if (I->hasInitializer())
IncorporateValue(I->getInitializer());
}
// Get types from aliases.
for (Module::const_alias_iterator I = M.alias_begin(),
E = M.alias_end(); I != E; ++I) {
IncorporateType(I->getType());
IncorporateValue(I->getAliasee());
}
// Get types from functions.
for (Module::const_iterator FI = M.begin(), E = M.end(); FI != E; ++FI) {
IncorporateType(FI->getType());
for (Function::const_iterator BB = FI->begin(), E = FI->end();
BB != E;++BB)
for (BasicBlock::const_iterator II = BB->begin(),
E = BB->end(); II != E; ++II) {
const Instruction &I = *II;
// Incorporate the type of the instruction and all its operands.
IncorporateType(I.getType());
for (User::const_op_iterator OI = I.op_begin(), OE = I.op_end();
OI != OE; ++OI)
IncorporateValue(*OI);
}
}
}
void buildCallMaps(Module const& M, FunctionsMap& F,
CallsMap& C) {
for (Module::const_iterator f = M.begin(); f != M.end(); ++f) {
if (!f->isDeclaration())
F.insert(std::make_pair(f->getFunctionType(), &*f));
for (Function::const_iterator b = f->begin(); b != f->end(); ++b) {
for (BasicBlock::const_iterator i = b->begin(); i != b->end(); ++i)
if (const CallInst *CI = dyn_cast<CallInst>(&*i)) {
if (!isInlineAssembly(CI) && !callToMemoryManStuff(CI))
C.insert(std::make_pair(getCalleePrototype(CI), CI));
} else if (const StoreInst *SI = dyn_cast<StoreInst>(&*i)) {
const Value *r = SI->getValueOperand();
if (hasExtraReference(r) && memoryManStuff(r)) {
const Function *fn = dyn_cast<Function>(r);
F.insert(std::make_pair(fn->getFunctionType(), fn));
}
}
}
}
}
void ModuleSummaryIndexBuilder::computeFunctionSummary(
const Function &F, BlockFrequencyInfo *BFI) {
// Summary not currently supported for anonymous functions, they must
// be renamed.
if (!F.hasName())
return;
unsigned NumInsts = 0;
// Map from callee ValueId to profile count. Used to accumulate profile
// counts for all static calls to a given callee.
DenseMap<const Value *, CalleeInfo> CallGraphEdges;
DenseSet<const Value *> RefEdges;
SmallPtrSet<const User *, 8> Visited;
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E;
++I) {
if (!isa<DbgInfoIntrinsic>(I))
++NumInsts;
if (auto CS = ImmutableCallSite(&*I)) {
auto *CalledFunction = CS.getCalledFunction();
if (CalledFunction && CalledFunction->hasName() &&
!CalledFunction->isIntrinsic()) {
auto ScaledCount = BFI ? BFI->getBlockProfileCount(&*BB) : None;
auto *CalleeId =
M->getValueSymbolTable().lookup(CalledFunction->getName());
CallGraphEdges[CalleeId] +=
(ScaledCount ? ScaledCount.getValue() : 0);
}
}
findRefEdges(&*I, RefEdges, Visited);
}
GlobalValueSummary::GVFlags Flags(F);
std::unique_ptr<FunctionSummary> FuncSummary =
llvm::make_unique<FunctionSummary>(Flags, NumInsts);
FuncSummary->addCallGraphEdges(CallGraphEdges);
FuncSummary->addRefEdges(RefEdges);
Index->addGlobalValueSummary(F.getName(), std::move(FuncSummary));
}
/// WriteFunction - Emit a function body to the module stream.
static void WriteFunction(const Function &F, NaClValueEnumerator &VE,
NaClBitstreamWriter &Stream) {
Stream.EnterSubblock(naclbitc::FUNCTION_BLOCK_ID);
VE.incorporateFunction(F);
SmallVector<unsigned, 64> Vals;
// Emit the number of basic blocks, so the reader can create them ahead of
// time.
Vals.push_back(VE.getBasicBlocks().size());
Stream.EmitRecord(naclbitc::FUNC_CODE_DECLAREBLOCKS, Vals);
Vals.clear();
// If there are function-local constants, emit them now.
unsigned CstStart, CstEnd;
VE.getFunctionConstantRange(CstStart, CstEnd);
WriteConstants(CstStart, CstEnd, VE, Stream);
// Keep a running idea of what the instruction ID is.
unsigned InstID = CstEnd;
// Finally, emit all the instructions, in order.
for (Function::const_iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end();
I != E; ++I) {
if (WriteInstruction(*I, InstID, VE, Stream, Vals) &&
!I->getType()->isVoidTy())
++InstID;
}
// Emit names for instructions etc.
if (PNaClAllowLocalSymbolTables)
WriteValueSymbolTable(F.getValueSymbolTable(), VE, Stream);
VE.purgeFunction();
Stream.ExitBlock();
}
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
// Enumerate the global variables.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
EnumerateValue(I);
// Enumerate the functions.
for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
EnumerateValue(I);
EnumerateAttributes(cast<Function>(I)->getAttributes());
}
// Enumerate the aliases.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I);
// Remember what is the cutoff between globalvalue's and other constants.
unsigned FirstConstant = Values.size();
// Enumerate the global variable initializers.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
if (I->hasInitializer())
EnumerateValue(I->getInitializer());
// Enumerate the aliasees.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I->getAliasee());
// Insert constants and metadata that are named at module level into the slot
// pool so that the module symbol table can refer to them...
EnumerateValueSymbolTable(M->getValueSymbolTable());
EnumerateNamedMetadata(M);
SmallVector<std::pair<unsigned, MDNode*>, 8> MDs;
// Enumerate types used by function bodies and argument lists.
for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I)
EnumerateType(I->getType());
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if (MDNode *MD = dyn_cast<MDNode>(*OI))
if (MD->isFunctionLocal() && MD->getFunction())
// These will get enumerated during function-incorporation.
continue;
EnumerateOperandType(*OI);
}
EnumerateType(I->getType());
if (const CallInst *CI = dyn_cast<CallInst>(I))
EnumerateAttributes(CI->getAttributes());
else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
EnumerateAttributes(II->getAttributes());
// Enumerate metadata attached with this instruction.
MDs.clear();
I->getAllMetadataOtherThanDebugLoc(MDs);
for (unsigned i = 0, e = MDs.size(); i != e; ++i)
EnumerateMetadata(MDs[i].second);
if (!I->getDebugLoc().isUnknown()) {
MDNode *Scope, *IA;
I->getDebugLoc().getScopeAndInlinedAt(Scope, IA, I->getContext());
if (Scope) EnumerateMetadata(Scope);
if (IA) EnumerateMetadata(IA);
}
}
}
// Optimize constant ordering.
OptimizeConstants(FirstConstant, Values.size());
}
static Error ReduceInsts(BugDriver &BD,
bool (*TestFn)(const BugDriver &, Module *)) {
// Attempt to delete instructions using bisection. This should help out nasty
// cases with large basic blocks where the problem is at one end.
if (!BugpointIsInterrupted) {
std::vector<const Instruction *> Insts;
for (const Function &F : *BD.getProgram())
for (const BasicBlock &BB : F)
for (const Instruction &I : BB)
if (!isa<TerminatorInst>(&I))
Insts.push_back(&I);
Expected<bool> Result =
ReduceCrashingInstructions(BD, TestFn).reduceList(Insts);
if (Error E = Result.takeError())
return E;
}
unsigned Simplification = 2;
do {
if (BugpointIsInterrupted)
// TODO: Should we distinguish this with an "interrupted error"?
return Error::success();
--Simplification;
outs() << "\n*** Attempting to reduce testcase by deleting instruc"
<< "tions: Simplification Level #" << Simplification << '\n';
// Now that we have deleted the functions that are unnecessary for the
// program, try to remove instructions that are not necessary to cause the
// crash. To do this, we loop through all of the instructions in the
// remaining functions, deleting them (replacing any values produced with
// nulls), and then running ADCE and SimplifyCFG. If the transformed input
// still triggers failure, keep deleting until we cannot trigger failure
// anymore.
//
unsigned InstructionsToSkipBeforeDeleting = 0;
TryAgain:
// Loop over all of the (non-terminator) instructions remaining in the
// function, attempting to delete them.
unsigned CurInstructionNum = 0;
for (Module::const_iterator FI = BD.getProgram()->begin(),
E = BD.getProgram()->end();
FI != E; ++FI)
if (!FI->isDeclaration())
for (Function::const_iterator BI = FI->begin(), E = FI->end(); BI != E;
++BI)
for (BasicBlock::const_iterator I = BI->begin(), E = --BI->end();
I != E; ++I, ++CurInstructionNum) {
if (InstructionsToSkipBeforeDeleting) {
--InstructionsToSkipBeforeDeleting;
} else {
if (BugpointIsInterrupted)
// TODO: Should this be some kind of interrupted error?
return Error::success();
if (I->isEHPad() || I->getType()->isTokenTy())
continue;
outs() << "Checking instruction: " << *I;
std::unique_ptr<Module> M =
BD.deleteInstructionFromProgram(&*I, Simplification);
// Find out if the pass still crashes on this pass...
if (TestFn(BD, M.get())) {
// Yup, it does, we delete the old module, and continue trying
// to reduce the testcase...
BD.setNewProgram(M.release());
InstructionsToSkipBeforeDeleting = CurInstructionNum;
goto TryAgain; // I wish I had a multi-level break here!
}
}
}
if (InstructionsToSkipBeforeDeleting) {
InstructionsToSkipBeforeDeleting = 0;
goto TryAgain;
}
} while (Simplification);
BD.EmitProgressBitcode(BD.getProgram(), "reduced-instructions");
return Error::success();
}
void externalsAndGlobalsCheck(const Module *m) {
std::map<std::string, bool> externals;
std::set<std::string> modelled(modelledExternals,
modelledExternals+NELEMS(modelledExternals));
std::set<std::string> dontCare(dontCareExternals,
dontCareExternals+NELEMS(dontCareExternals));
std::set<std::string> unsafe(unsafeExternals,
unsafeExternals+NELEMS(unsafeExternals));
switch (Libc) {
case KleeLibc:
dontCare.insert(dontCareKlee, dontCareKlee+NELEMS(dontCareKlee));
break;
case UcLibc:
dontCare.insert(dontCareUclibc,
dontCareUclibc+NELEMS(dontCareUclibc));
break;
case NoLibc: /* silence compiler warning */
break;
}
if (WithPOSIXRuntime)
dontCare.insert("syscall");
for (Module::const_iterator fnIt = m->begin(), fn_ie = m->end();
fnIt != fn_ie; ++fnIt) {
if (fnIt->isDeclaration() && !fnIt->use_empty())
externals.insert(std::make_pair(fnIt->getName(), false));
for (Function::const_iterator bbIt = fnIt->begin(), bb_ie = fnIt->end();
bbIt != bb_ie; ++bbIt) {
for (BasicBlock::const_iterator it = bbIt->begin(), ie = bbIt->end();
it != ie; ++it) {
if (const CallInst *ci = dyn_cast<CallInst>(it)) {
if (isa<InlineAsm>(ci->getCalledValue())) {
klee_warning_once(&*fnIt,
"function \"%s\" has inline asm",
fnIt->getName().data());
}
}
}
}
}
for (Module::const_global_iterator
it = m->global_begin(), ie = m->global_end();
it != ie; ++it)
if (it->isDeclaration() && !it->use_empty())
externals.insert(std::make_pair(it->getName(), true));
// and remove aliases (they define the symbol after global
// initialization)
for (Module::const_alias_iterator
it = m->alias_begin(), ie = m->alias_end();
it != ie; ++it) {
std::map<std::string, bool>::iterator it2 =
externals.find(it->getName());
if (it2!=externals.end())
externals.erase(it2);
}
std::map<std::string, bool> foundUnsafe;
for (std::map<std::string, bool>::iterator
it = externals.begin(), ie = externals.end();
it != ie; ++it) {
const std::string &ext = it->first;
if (!modelled.count(ext) && (WarnAllExternals ||
!dontCare.count(ext))) {
if (unsafe.count(ext)) {
foundUnsafe.insert(*it);
} else {
klee_warning("undefined reference to %s: %s",
it->second ? "variable" : "function",
ext.c_str());
}
}
}
for (std::map<std::string, bool>::iterator
it = foundUnsafe.begin(), ie = foundUnsafe.end();
it != ie; ++it) {
const std::string &ext = it->first;
klee_warning("undefined reference to %s: %s (UNSAFE)!",
it->second ? "variable" : "function",
ext.c_str());
}
}
void FunctionLoweringInfo::set(const Function &fn, MachineFunction &mf,
SelectionDAG *DAG) {
const TargetLowering *TLI = TM.getTargetLowering();
Fn = &fn;
MF = &mf;
RegInfo = &MF->getRegInfo();
// Check whether the function can return without sret-demotion.
SmallVector<ISD::OutputArg, 4> Outs;
GetReturnInfo(Fn->getReturnType(), Fn->getAttributes(), Outs, *TLI);
CanLowerReturn = TLI->CanLowerReturn(Fn->getCallingConv(), *MF,
Fn->isVarArg(),
Outs, Fn->getContext());
// Initialize the mapping of values to registers. This is only set up for
// instruction values that are used outside of the block that defines
// them.
Function::const_iterator BB = Fn->begin(), EB = Fn->end();
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (const AllocaInst *AI = dyn_cast<AllocaInst>(I)) {
// Don't fold inalloca allocas or other dynamic allocas into the initial
// stack frame allocation, even if they are in the entry block.
if (!AI->isStaticAlloca())
continue;
if (const ConstantInt *CUI = dyn_cast<ConstantInt>(AI->getArraySize())) {
Type *Ty = AI->getAllocatedType();
uint64_t TySize = TLI->getDataLayout()->getTypeAllocSize(Ty);
unsigned Align =
std::max((unsigned)TLI->getDataLayout()->getPrefTypeAlignment(Ty),
AI->getAlignment());
TySize *= CUI->getZExtValue(); // Get total allocated size.
if (TySize == 0) TySize = 1; // Don't create zero-sized stack objects.
StaticAllocaMap[AI] =
MF->getFrameInfo()->CreateStackObject(TySize, Align, false, AI);
}
}
for (; BB != EB; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end();
I != E; ++I) {
// Look for dynamic allocas.
if (const AllocaInst *AI = dyn_cast<AllocaInst>(I)) {
if (!AI->isStaticAlloca()) {
unsigned Align = std::max(
(unsigned)TLI->getDataLayout()->getPrefTypeAlignment(
AI->getAllocatedType()),
AI->getAlignment());
unsigned StackAlign = TM.getFrameLowering()->getStackAlignment();
if (Align <= StackAlign)
Align = 0;
// Inform the Frame Information that we have variable-sized objects.
MF->getFrameInfo()->CreateVariableSizedObject(Align ? Align : 1, AI);
}
}
// Look for inline asm that clobbers the SP register.
if (isa<CallInst>(I) || isa<InvokeInst>(I)) {
ImmutableCallSite CS(I);
if (isa<InlineAsm>(CS.getCalledValue())) {
unsigned SP = TLI->getStackPointerRegisterToSaveRestore();
std::vector<TargetLowering::AsmOperandInfo> Ops =
TLI->ParseConstraints(CS);
for (size_t I = 0, E = Ops.size(); I != E; ++I) {
TargetLowering::AsmOperandInfo &Op = Ops[I];
if (Op.Type == InlineAsm::isClobber) {
// Clobbers don't have SDValue operands, hence SDValue().
TLI->ComputeConstraintToUse(Op, SDValue(), DAG);
std::pair<unsigned, const TargetRegisterClass*> PhysReg =
TLI->getRegForInlineAsmConstraint(Op.ConstraintCode,
Op.ConstraintVT);
if (PhysReg.first == SP)
MF->getFrameInfo()->setHasInlineAsmWithSPAdjust(true);
}
}
}
}
// Mark values used outside their block as exported, by allocating
// a virtual register for them.
if (isUsedOutsideOfDefiningBlock(I))
if (!isa<AllocaInst>(I) ||
!StaticAllocaMap.count(cast<AllocaInst>(I)))
InitializeRegForValue(I);
// Collect llvm.dbg.declare information. This is done now instead of
// during the initial isel pass through the IR so that it is done
// in a predictable order.
if (const DbgDeclareInst *DI = dyn_cast<DbgDeclareInst>(I)) {
MachineModuleInfo &MMI = MF->getMMI();
DIVariable DIVar(DI->getVariable());
assert((!DIVar || DIVar.isVariable()) &&
"Variable in DbgDeclareInst should be either null or a DIVariable.");
if (MMI.hasDebugInfo() &&
DIVar &&
!DI->getDebugLoc().isUnknown()) {
// Don't handle byval struct arguments or VLAs, for example.
// Non-byval arguments are handled here (they refer to the stack
// temporary alloca at this point).
const Value *Address = DI->getAddress();
if (Address) {
if (const BitCastInst *BCI = dyn_cast<BitCastInst>(Address))
Address = BCI->getOperand(0);
if (const AllocaInst *AI = dyn_cast<AllocaInst>(Address)) {
DenseMap<const AllocaInst *, int>::iterator SI =
StaticAllocaMap.find(AI);
if (SI != StaticAllocaMap.end()) { // Check for VLAs.
int FI = SI->second;
MMI.setVariableDbgInfo(DI->getVariable(),
FI, DI->getDebugLoc());
}
}
}
}
}
}
// Create an initial MachineBasicBlock for each LLVM BasicBlock in F. This
// also creates the initial PHI MachineInstrs, though none of the input
// operands are populated.
for (BB = Fn->begin(); BB != EB; ++BB) {
MachineBasicBlock *MBB = mf.CreateMachineBasicBlock(BB);
MBBMap[BB] = MBB;
MF->push_back(MBB);
// Transfer the address-taken flag. This is necessary because there could
// be multiple MachineBasicBlocks corresponding to one BasicBlock, and only
// the first one should be marked.
if (BB->hasAddressTaken())
MBB->setHasAddressTaken();
// Create Machine PHI nodes for LLVM PHI nodes, lowering them as
// appropriate.
for (BasicBlock::const_iterator I = BB->begin();
const PHINode *PN = dyn_cast<PHINode>(I); ++I) {
if (PN->use_empty()) continue;
// Skip empty types
if (PN->getType()->isEmptyTy())
continue;
DebugLoc DL = PN->getDebugLoc();
unsigned PHIReg = ValueMap[PN];
assert(PHIReg && "PHI node does not have an assigned virtual register!");
SmallVector<EVT, 4> ValueVTs;
ComputeValueVTs(*TLI, PN->getType(), ValueVTs);
for (unsigned vti = 0, vte = ValueVTs.size(); vti != vte; ++vti) {
EVT VT = ValueVTs[vti];
unsigned NumRegisters = TLI->getNumRegisters(Fn->getContext(), VT);
const TargetInstrInfo *TII = MF->getTarget().getInstrInfo();
for (unsigned i = 0; i != NumRegisters; ++i)
BuildMI(MBB, DL, TII->get(TargetOpcode::PHI), PHIReg + i);
PHIReg += NumRegisters;
}
}
}
// Mark landing pad blocks.
for (BB = Fn->begin(); BB != EB; ++BB)
if (const InvokeInst *Invoke = dyn_cast<InvokeInst>(BB->getTerminator()))
MBBMap[Invoke->getSuccessor(1)]->setIsLandingPad();
}
void TypeFinder::run(const Module &M, bool onlyNamed) {
OnlyNamed = onlyNamed;
// Get types from global variables.
for (Module::const_global_iterator I = M.global_begin(),
E = M.global_end(); I != E; ++I) {
incorporateType(I->getType());
if (I->hasInitializer())
incorporateValue(I->getInitializer());
}
// Get types from aliases.
for (Module::const_alias_iterator I = M.alias_begin(),
E = M.alias_end(); I != E; ++I) {
incorporateType(I->getType());
if (const Value *Aliasee = I->getAliasee())
incorporateValue(Aliasee);
}
// Get types from functions.
SmallVector<std::pair<unsigned, MDNode *>, 4> MDForInst;
for (Module::const_iterator FI = M.begin(), E = M.end(); FI != E; ++FI) {
incorporateType(FI->getType());
if (FI->hasPrefixData())
incorporateValue(FI->getPrefixData());
if (FI->hasPrologueData())
incorporateValue(FI->getPrologueData());
if (FI->hasPersonalityFn())
incorporateValue(FI->getPersonalityFn());
// First incorporate the arguments.
for (Function::const_arg_iterator AI = FI->arg_begin(),
AE = FI->arg_end(); AI != AE; ++AI)
incorporateValue(AI);
for (Function::const_iterator BB = FI->begin(), E = FI->end();
BB != E; ++BB)
for (BasicBlock::const_iterator II = BB->begin(),
E = BB->end(); II != E; ++II) {
const Instruction &I = *II;
// Incorporate the type of the instruction.
incorporateType(I.getType());
// Incorporate non-instruction operand types. (We are incorporating all
// instructions with this loop.)
for (User::const_op_iterator OI = I.op_begin(), OE = I.op_end();
OI != OE; ++OI)
if (*OI && !isa<Instruction>(OI))
incorporateValue(*OI);
// Incorporate types hiding in metadata.
I.getAllMetadataOtherThanDebugLoc(MDForInst);
for (unsigned i = 0, e = MDForInst.size(); i != e; ++i)
incorporateMDNode(MDForInst[i].second);
MDForInst.clear();
}
}
for (Module::const_named_metadata_iterator I = M.named_metadata_begin(),
E = M.named_metadata_end(); I != E; ++I) {
const NamedMDNode *NMD = I;
for (unsigned i = 0, e = NMD->getNumOperands(); i != e; ++i)
incorporateMDNode(NMD->getOperand(i));
}
}
void FunctionLoweringInfo::set(const Function &fn, MachineFunction &mf) {
Fn = &fn;
MF = &mf;
RegInfo = &MF->getRegInfo();
// Check whether the function can return without sret-demotion.
SmallVector<ISD::OutputArg, 4> Outs;
GetReturnInfo(Fn->getReturnType(),
Fn->getAttributes().getRetAttributes(), Outs, TLI);
CanLowerReturn = TLI.CanLowerReturn(Fn->getCallingConv(), *MF,
Fn->isVarArg(),
Outs, Fn->getContext());
// Initialize the mapping of values to registers. This is only set up for
// instruction values that are used outside of the block that defines
// them.
Function::const_iterator BB = Fn->begin(), EB = Fn->end();
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (const AllocaInst *AI = dyn_cast<AllocaInst>(I))
if (const ConstantInt *CUI = dyn_cast<ConstantInt>(AI->getArraySize())) {
const Type *Ty = AI->getAllocatedType();
uint64_t TySize = TLI.getTargetData()->getTypeAllocSize(Ty);
unsigned Align =
std::max((unsigned)TLI.getTargetData()->getPrefTypeAlignment(Ty),
AI->getAlignment());
TySize *= CUI->getZExtValue(); // Get total allocated size.
if (TySize == 0) TySize = 1; // Don't create zero-sized stack objects.
// The object may need to be placed onto the stack near the stack
// protector if one exists. Determine here if this object is a suitable
// candidate. I.e., it would trigger the creation of a stack protector.
bool MayNeedSP =
(AI->isArrayAllocation() ||
(TySize > 8 && isa<ArrayType>(Ty) &&
cast<ArrayType>(Ty)->getElementType()->isIntegerTy(8)));
StaticAllocaMap[AI] =
MF->getFrameInfo()->CreateStackObject(TySize, Align, false, MayNeedSP);
}
for (; BB != EB; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E; ++I) {
// Mark values used outside their block as exported, by allocating
// a virtual register for them.
if (isUsedOutsideOfDefiningBlock(I))
if (!isa<AllocaInst>(I) ||
!StaticAllocaMap.count(cast<AllocaInst>(I)))
InitializeRegForValue(I);
// Collect llvm.dbg.declare information. This is done now instead of
// during the initial isel pass through the IR so that it is done
// in a predictable order.
if (const DbgDeclareInst *DI = dyn_cast<DbgDeclareInst>(I)) {
MachineModuleInfo &MMI = MF->getMMI();
if (MMI.hasDebugInfo() &&
DIVariable(DI->getVariable()).Verify() &&
!DI->getDebugLoc().isUnknown()) {
// Don't handle byval struct arguments or VLAs, for example.
// Non-byval arguments are handled here (they refer to the stack
// temporary alloca at this point).
const Value *Address = DI->getAddress();
if (Address) {
if (const BitCastInst *BCI = dyn_cast<BitCastInst>(Address))
Address = BCI->getOperand(0);
if (const AllocaInst *AI = dyn_cast<AllocaInst>(Address)) {
DenseMap<const AllocaInst *, int>::iterator SI =
StaticAllocaMap.find(AI);
if (SI != StaticAllocaMap.end()) { // Check for VLAs.
int FI = SI->second;
MMI.setVariableDbgInfo(DI->getVariable(),
FI, DI->getDebugLoc());
}
}
}
}
}
}
// Create an initial MachineBasicBlock for each LLVM BasicBlock in F. This
// also creates the initial PHI MachineInstrs, though none of the input
// operands are populated.
for (BB = Fn->begin(); BB != EB; ++BB) {
MachineBasicBlock *MBB = mf.CreateMachineBasicBlock(BB);
MBBMap[BB] = MBB;
MF->push_back(MBB);
// Transfer the address-taken flag. This is necessary because there could
// be multiple MachineBasicBlocks corresponding to one BasicBlock, and only
// the first one should be marked.
if (BB->hasAddressTaken())
MBB->setHasAddressTaken();
// Create Machine PHI nodes for LLVM PHI nodes, lowering them as
// appropriate.
for (BasicBlock::const_iterator I = BB->begin();
const PHINode *PN = dyn_cast<PHINode>(I); ++I) {
if (PN->use_empty()) continue;
// Skip empty types
if (PN->getType()->isEmptyTy())
continue;
DebugLoc DL = PN->getDebugLoc();
unsigned PHIReg = ValueMap[PN];
assert(PHIReg && "PHI node does not have an assigned virtual register!");
SmallVector<EVT, 4> ValueVTs;
ComputeValueVTs(TLI, PN->getType(), ValueVTs);
for (unsigned vti = 0, vte = ValueVTs.size(); vti != vte; ++vti) {
EVT VT = ValueVTs[vti];
unsigned NumRegisters = TLI.getNumRegisters(Fn->getContext(), VT);
const TargetInstrInfo *TII = MF->getTarget().getInstrInfo();
for (unsigned i = 0; i != NumRegisters; ++i)
BuildMI(MBB, DL, TII->get(TargetOpcode::PHI), PHIReg + i);
PHIReg += NumRegisters;
}
}
}
// Mark landing pad blocks.
for (BB = Fn->begin(); BB != EB; ++BB)
if (const InvokeInst *Invoke = dyn_cast<InvokeInst>(BB->getTerminator()))
MBBMap[Invoke->getSuccessor(1)]->setIsLandingPad();
}
/// NaClValueEnumerator - Enumerate module-level information.
NaClValueEnumerator::NaClValueEnumerator(const Module *M) {
// Create map for counting frequency of types, and set field
// TypeCountMap accordingly. Note: Pointer field TypeCountMap is
// used to deal with the fact that types are added through various
// method calls in this routine. Rather than pass it as an argument,
// we use a field. The field is a pointer so that the memory
// footprint of count_map can be garbage collected when this
// constructor completes.
TypeCountMapType count_map;
TypeCountMap = &count_map;
// Enumerate the global variables.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
EnumerateValue(I);
// Enumerate the functions.
for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
EnumerateValue(I);
EnumerateAttributes(cast<Function>(I)->getAttributes());
}
// Enumerate the aliases.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I);
// Remember what is the cutoff between globalvalue's and other constants.
unsigned FirstConstant = Values.size();
// Enumerate the global variable initializers.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
if (I->hasInitializer())
EnumerateValue(I->getInitializer());
// Enumerate the aliasees.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I->getAliasee());
// Insert constants and metadata that are named at module level into the slot
// pool so that the module symbol table can refer to them...
EnumerateValueSymbolTable(M->getValueSymbolTable());
EnumerateNamedMetadata(M);
SmallVector<std::pair<unsigned, MDNode*>, 8> MDs;
// Enumerate types used by function bodies and argument lists.
for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I)
EnumerateType(I->getType());
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if (MDNode *MD = dyn_cast<MDNode>(*OI))
if (MD->isFunctionLocal() && MD->getFunction())
// These will get enumerated during function-incorporation.
continue;
EnumerateOperandType(*OI);
}
EnumerateType(I->getType());
if (const CallInst *CI = dyn_cast<CallInst>(I))
EnumerateAttributes(CI->getAttributes());
else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
EnumerateAttributes(II->getAttributes());
// Enumerate metadata attached with this instruction.
MDs.clear();
I->getAllMetadataOtherThanDebugLoc(MDs);
for (unsigned i = 0, e = MDs.size(); i != e; ++i)
EnumerateMetadata(MDs[i].second);
if (!I->getDebugLoc().isUnknown()) {
MDNode *Scope, *IA;
I->getDebugLoc().getScopeAndInlinedAt(Scope, IA, I->getContext());
if (Scope) EnumerateMetadata(Scope);
if (IA) EnumerateMetadata(IA);
}
}
}
// Optimized type indicies to put "common" expected types in with small
// indices.
OptimizeTypes(M);
TypeCountMap = NULL;
// Optimize constant ordering.
OptimizeConstants(FirstConstant, Values.size());
}
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
InstructionCount = 0;
// Enumerate the global variables.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
EnumerateValue(I);
// Enumerate the functions.
for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
EnumerateValue(I);
EnumerateAttributes(cast<Function>(I)->getAttributes());
}
// Enumerate the aliases.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I);
// Remember what is the cutoff between globalvalue's and other constants.
unsigned FirstConstant = Values.size();
// Enumerate the global variable initializers.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
if (I->hasInitializer())
EnumerateValue(I->getInitializer());
// Enumerate the aliasees.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I->getAliasee());
// Enumerate types used by the type symbol table.
EnumerateTypeSymbolTable(M->getTypeSymbolTable());
// Insert constants that are named at module level into the slot pool so that
// the module symbol table can refer to them...
EnumerateValueSymbolTable(M->getValueSymbolTable());
// Enumerate types used by function bodies and argument lists.
for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I)
EnumerateType(I->getType());
MetadataContext &TheMetadata = F->getContext().getMetadata();
typedef SmallVector<std::pair<unsigned, TrackingVH<MDNode> >, 2> MDMapTy;
MDMapTy MDs;
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI)
EnumerateOperandType(*OI);
EnumerateType(I->getType());
if (const CallInst *CI = dyn_cast<CallInst>(I))
EnumerateAttributes(CI->getAttributes());
else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
EnumerateAttributes(II->getAttributes());
// Enumerate metadata attached with this instruction.
MDs.clear();
TheMetadata.getMDs(I, MDs);
for (MDMapTy::const_iterator MI = MDs.begin(), ME = MDs.end(); MI != ME;
++MI)
EnumerateMetadata(MI->second);
}
}
// Optimize constant ordering.
OptimizeConstants(FirstConstant, Values.size());
// Sort the type table by frequency so that most commonly used types are early
// in the table (have low bit-width).
std::stable_sort(Types.begin(), Types.end(), CompareByFrequency);
// Partition the Type ID's so that the single-value types occur before the
// aggregate types. This allows the aggregate types to be dropped from the
// type table after parsing the global variable initializers.
std::partition(Types.begin(), Types.end(), isSingleValueType);
// Now that we rearranged the type table, rebuild TypeMap.
for (unsigned i = 0, e = Types.size(); i != e; ++i)
TypeMap[Types[i].first] = i+1;
}
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
// Enumerate the global variables.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
EnumerateValue(I);
// Enumerate the functions.
for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
EnumerateValue(I);
EnumerateParamAttrs(cast<Function>(I)->getParamAttrs());
}
// Enumerate the aliases.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I);
// Remember what is the cutoff between globalvalue's and other constants.
unsigned FirstConstant = Values.size();
// Enumerate the global variable initializers.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
if (I->hasInitializer())
EnumerateValue(I->getInitializer());
// Enumerate the aliasees.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I->getAliasee());
// Enumerate types used by the type symbol table.
EnumerateTypeSymbolTable(M->getTypeSymbolTable());
// Insert constants that are named at module level into the slot pool so that
// the module symbol table can refer to them...
EnumerateValueSymbolTable(M->getValueSymbolTable());
// Enumerate types used by function bodies and argument lists.
for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I)
EnumerateType(I->getType());
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI)
EnumerateOperandType(*OI);
EnumerateType(I->getType());
if (const CallInst *CI = dyn_cast<CallInst>(I))
EnumerateParamAttrs(CI->getParamAttrs());
else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
EnumerateParamAttrs(II->getParamAttrs());
}
}
// Optimize constant ordering.
OptimizeConstants(FirstConstant, Values.size());
// Sort the type table by frequency so that most commonly used types are early
// in the table (have low bit-width).
std::stable_sort(Types.begin(), Types.end(), CompareByFrequency);
// Partition the Type ID's so that the first-class types occur before the
// aggregate types. This allows the aggregate types to be dropped from the
// type table after parsing the global variable initializers.
std::partition(Types.begin(), Types.end(), isFirstClassType);
// Now that we rearranged the type table, rebuild TypeMap.
for (unsigned i = 0, e = Types.size(); i != e; ++i)
TypeMap[Types[i].first] = i+1;
}
void FunctionLoweringInfo::set(const Function &fn, MachineFunction &mf,
SelectionDAG *DAG) {
Fn = &fn;
MF = &mf;
TLI = MF->getSubtarget().getTargetLowering();
RegInfo = &MF->getRegInfo();
MachineModuleInfo &MMI = MF->getMMI();
// Check whether the function can return without sret-demotion.
SmallVector<ISD::OutputArg, 4> Outs;
GetReturnInfo(Fn->getReturnType(), Fn->getAttributes(), Outs, *TLI);
CanLowerReturn = TLI->CanLowerReturn(Fn->getCallingConv(), *MF,
Fn->isVarArg(), Outs, Fn->getContext());
// Initialize the mapping of values to registers. This is only set up for
// instruction values that are used outside of the block that defines
// them.
Function::const_iterator BB = Fn->begin(), EB = Fn->end();
for (; BB != EB; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end();
I != E; ++I) {
if (const AllocaInst *AI = dyn_cast<AllocaInst>(I)) {
// Static allocas can be folded into the initial stack frame adjustment.
if (AI->isStaticAlloca()) {
const ConstantInt *CUI = cast<ConstantInt>(AI->getArraySize());
Type *Ty = AI->getAllocatedType();
uint64_t TySize = TLI->getDataLayout()->getTypeAllocSize(Ty);
unsigned Align =
std::max((unsigned)TLI->getDataLayout()->getPrefTypeAlignment(Ty),
AI->getAlignment());
TySize *= CUI->getZExtValue(); // Get total allocated size.
if (TySize == 0) TySize = 1; // Don't create zero-sized stack objects.
StaticAllocaMap[AI] =
MF->getFrameInfo()->CreateStackObject(TySize, Align, false, AI);
} else {
unsigned Align = std::max(
(unsigned)TLI->getDataLayout()->getPrefTypeAlignment(
AI->getAllocatedType()),
AI->getAlignment());
unsigned StackAlign =
MF->getSubtarget().getFrameLowering()->getStackAlignment();
if (Align <= StackAlign)
Align = 0;
// Inform the Frame Information that we have variable-sized objects.
MF->getFrameInfo()->CreateVariableSizedObject(Align ? Align : 1, AI);
}
}
// Look for inline asm that clobbers the SP register.
if (isa<CallInst>(I) || isa<InvokeInst>(I)) {
ImmutableCallSite CS(I);
if (isa<InlineAsm>(CS.getCalledValue())) {
unsigned SP = TLI->getStackPointerRegisterToSaveRestore();
const TargetRegisterInfo *TRI = MF->getSubtarget().getRegisterInfo();
std::vector<TargetLowering::AsmOperandInfo> Ops =
TLI->ParseConstraints(TRI, CS);
for (size_t I = 0, E = Ops.size(); I != E; ++I) {
TargetLowering::AsmOperandInfo &Op = Ops[I];
if (Op.Type == InlineAsm::isClobber) {
// Clobbers don't have SDValue operands, hence SDValue().
TLI->ComputeConstraintToUse(Op, SDValue(), DAG);
std::pair<unsigned, const TargetRegisterClass *> PhysReg =
TLI->getRegForInlineAsmConstraint(TRI, Op.ConstraintCode,
Op.ConstraintVT);
if (PhysReg.first == SP)
MF->getFrameInfo()->setHasInlineAsmWithSPAdjust(true);
}
}
}
}
// Look for calls to the @llvm.va_start intrinsic. We can omit some
// prologue boilerplate for variadic functions that don't examine their
// arguments.
if (const auto *II = dyn_cast<IntrinsicInst>(I)) {
if (II->getIntrinsicID() == Intrinsic::vastart)
MF->getFrameInfo()->setHasVAStart(true);
}
// If we have a musttail call in a variadic funciton, we need to ensure we
// forward implicit register parameters.
if (const auto *CI = dyn_cast<CallInst>(I)) {
if (CI->isMustTailCall() && Fn->isVarArg())
MF->getFrameInfo()->setHasMustTailInVarArgFunc(true);
}
// Mark values used outside their block as exported, by allocating
// a virtual register for them.
if (isUsedOutsideOfDefiningBlock(I))
if (!isa<AllocaInst>(I) ||
!StaticAllocaMap.count(cast<AllocaInst>(I)))
InitializeRegForValue(I);
// Collect llvm.dbg.declare information. This is done now instead of
// during the initial isel pass through the IR so that it is done
// in a predictable order.
if (const DbgDeclareInst *DI = dyn_cast<DbgDeclareInst>(I)) {
assert(DI->getVariable() && "Missing variable");
assert(DI->getDebugLoc() && "Missing location");
if (MMI.hasDebugInfo()) {
// Don't handle byval struct arguments or VLAs, for example.
// Non-byval arguments are handled here (they refer to the stack
// temporary alloca at this point).
const Value *Address = DI->getAddress();
if (Address) {
if (const BitCastInst *BCI = dyn_cast<BitCastInst>(Address))
Address = BCI->getOperand(0);
if (const AllocaInst *AI = dyn_cast<AllocaInst>(Address)) {
DenseMap<const AllocaInst *, int>::iterator SI =
StaticAllocaMap.find(AI);
if (SI != StaticAllocaMap.end()) { // Check for VLAs.
int FI = SI->second;
MMI.setVariableDbgInfo(DI->getVariable(), DI->getExpression(),
FI, DI->getDebugLoc());
}
}
}
}
}
// Decide the preferred extend type for a value.
PreferredExtendType[I] = getPreferredExtendForValue(I);
}
// Create an initial MachineBasicBlock for each LLVM BasicBlock in F. This
// also creates the initial PHI MachineInstrs, though none of the input
// operands are populated.
for (BB = Fn->begin(); BB != EB; ++BB) {
MachineBasicBlock *MBB = mf.CreateMachineBasicBlock(BB);
MBBMap[BB] = MBB;
MF->push_back(MBB);
// Transfer the address-taken flag. This is necessary because there could
// be multiple MachineBasicBlocks corresponding to one BasicBlock, and only
// the first one should be marked.
if (BB->hasAddressTaken())
MBB->setHasAddressTaken();
// Create Machine PHI nodes for LLVM PHI nodes, lowering them as
// appropriate.
for (BasicBlock::const_iterator I = BB->begin();
const PHINode *PN = dyn_cast<PHINode>(I); ++I) {
if (PN->use_empty()) continue;
// Skip empty types
if (PN->getType()->isEmptyTy())
continue;
DebugLoc DL = PN->getDebugLoc();
unsigned PHIReg = ValueMap[PN];
assert(PHIReg && "PHI node does not have an assigned virtual register!");
SmallVector<EVT, 4> ValueVTs;
ComputeValueVTs(*TLI, PN->getType(), ValueVTs);
for (unsigned vti = 0, vte = ValueVTs.size(); vti != vte; ++vti) {
EVT VT = ValueVTs[vti];
unsigned NumRegisters = TLI->getNumRegisters(Fn->getContext(), VT);
const TargetInstrInfo *TII = MF->getSubtarget().getInstrInfo();
for (unsigned i = 0; i != NumRegisters; ++i)
BuildMI(MBB, DL, TII->get(TargetOpcode::PHI), PHIReg + i);
PHIReg += NumRegisters;
}
}
}
// Mark landing pad blocks.
SmallVector<const LandingPadInst *, 4> LPads;
for (BB = Fn->begin(); BB != EB; ++BB) {
if (const auto *Invoke = dyn_cast<InvokeInst>(BB->getTerminator()))
MBBMap[Invoke->getSuccessor(1)]->setIsLandingPad();
if (BB->isLandingPad())
LPads.push_back(BB->getLandingPadInst());
}
// If this is an MSVC EH personality, we need to do a bit more work.
EHPersonality Personality = EHPersonality::Unknown;
if (!LPads.empty())
Personality = classifyEHPersonality(LPads.back()->getPersonalityFn());
if (!isMSVCEHPersonality(Personality))
return;
if (Personality == EHPersonality::MSVC_Win64SEH ||
Personality == EHPersonality::MSVC_X86SEH) {
addSEHHandlersForLPads(LPads);
}
WinEHFuncInfo &EHInfo = MMI.getWinEHFuncInfo(&fn);
if (Personality == EHPersonality::MSVC_CXX) {
const Function *WinEHParentFn = MMI.getWinEHParent(&fn);
calculateWinCXXEHStateNumbers(WinEHParentFn, EHInfo);
}
// Copy the state numbers to LandingPadInfo for the current function, which
// could be a handler or the parent. This should happen for 32-bit SEH and
// C++ EH.
if (Personality == EHPersonality::MSVC_CXX ||
Personality == EHPersonality::MSVC_X86SEH) {
for (const LandingPadInst *LP : LPads) {
MachineBasicBlock *LPadMBB = MBBMap[LP->getParent()];
MMI.addWinEHState(LPadMBB, EHInfo.LandingPadStateMap[LP]);
}
}
}
/// analyzeFunction - Fill in the current structure with information gleaned
/// from the specified function.
void InlineCostAnalyzer::FunctionInfo::analyzeFunction(Function *F) {
unsigned NumInsts = 0, NumBlocks = 0, NumVectorInsts = 0;
// Look at the size of the callee. Each basic block counts as 20 units, and
// each instruction counts as 5.
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB) {
for (BasicBlock::const_iterator II = BB->begin(), E = BB->end();
II != E; ++II) {
if (isa<PHINode>(II)) continue; // PHI nodes don't count.
// Special handling for calls.
if (isa<CallInst>(II) || isa<InvokeInst>(II)) {
if (isa<DbgInfoIntrinsic>(II))
continue; // Debug intrinsics don't count as size.
CallSite CS = CallSite::get(const_cast<Instruction*>(&*II));
// If this function contains a call to setjmp or _setjmp, never inline
// it. This is a hack because we depend on the user marking their local
// variables as volatile if they are live across a setjmp call, and they
// probably won't do this in callers.
if (Function *F = CS.getCalledFunction())
if (F->isDeclaration() &&
(F->isName("setjmp") || F->isName("_setjmp"))) {
NeverInline = true;
return;
}
// Calls often compile into many machine instructions. Bump up their
// cost to reflect this.
if (!isa<IntrinsicInst>(II))
NumInsts += 5;
}
if (const AllocaInst *AI = dyn_cast<AllocaInst>(II)) {
if (!AI->isStaticAlloca())
this->usesDynamicAlloca = true;
}
if (isa<ExtractElementInst>(II) || isa<VectorType>(II->getType()))
++NumVectorInsts;
// Noop casts, including ptr <-> int, don't count.
if (const CastInst *CI = dyn_cast<CastInst>(II)) {
if (CI->isLosslessCast() || isa<IntToPtrInst>(CI) ||
isa<PtrToIntInst>(CI))
continue;
} else if (const GetElementPtrInst *GEPI =
dyn_cast<GetElementPtrInst>(II)) {
// If a GEP has all constant indices, it will probably be folded with
// a load/store.
bool AllConstant = true;
for (unsigned i = 1, e = GEPI->getNumOperands(); i != e; ++i)
if (!isa<ConstantInt>(GEPI->getOperand(i))) {
AllConstant = false;
break;
}
if (AllConstant) continue;
}
++NumInsts;
}
++NumBlocks;
}
this->NumBlocks = NumBlocks;
this->NumInsts = NumInsts;
this->NumVectorInsts = NumVectorInsts;
// Check out all of the arguments to the function, figuring out how much
// code can be eliminated if one of the arguments is a constant.
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(); I != E; ++I)
ArgumentWeights.push_back(ArgInfo(CountCodeReductionForConstant(I),
CountCodeReductionForAlloca(I)));
}
/// DebugACrash - Given a predicate that determines whether a component crashes
/// on a program, try to destructively reduce the program while still keeping
/// the predicate true.
static bool DebugACrash(BugDriver &BD,
bool (*TestFn)(const BugDriver &, Module *),
std::string &Error) {
// See if we can get away with nuking some of the global variable initializers
// in the program...
if (!NoGlobalRM &&
BD.getProgram()->global_begin() != BD.getProgram()->global_end()) {
// Now try to reduce the number of global variable initializers in the
// module to something small.
Module *M = CloneModule(BD.getProgram());
bool DeletedInit = false;
for (Module::global_iterator I = M->global_begin(), E = M->global_end();
I != E; ++I)
if (I->hasInitializer()) {
I->setInitializer(nullptr);
I->setLinkage(GlobalValue::ExternalLinkage);
DeletedInit = true;
}
if (!DeletedInit) {
delete M; // No change made...
} else {
// See if the program still causes a crash...
outs() << "\nChecking to see if we can delete global inits: ";
if (TestFn(BD, M)) { // Still crashes?
BD.setNewProgram(M);
outs() << "\n*** Able to remove all global initializers!\n";
} else { // No longer crashes?
outs() << " - Removing all global inits hides problem!\n";
delete M;
std::vector<GlobalVariable*> GVs;
for (Module::global_iterator I = BD.getProgram()->global_begin(),
E = BD.getProgram()->global_end(); I != E; ++I)
if (I->hasInitializer())
GVs.push_back(&*I);
if (GVs.size() > 1 && !BugpointIsInterrupted) {
outs() << "\n*** Attempting to reduce the number of global "
<< "variables in the testcase\n";
unsigned OldSize = GVs.size();
ReduceCrashingGlobalVariables(BD, TestFn).reduceList(GVs, Error);
if (!Error.empty())
return true;
if (GVs.size() < OldSize)
BD.EmitProgressBitcode(BD.getProgram(), "reduced-global-variables");
}
}
}
}
// Now try to reduce the number of functions in the module to something small.
std::vector<Function*> Functions;
for (Function &F : *BD.getProgram())
if (!F.isDeclaration())
Functions.push_back(&F);
if (Functions.size() > 1 && !BugpointIsInterrupted) {
outs() << "\n*** Attempting to reduce the number of functions "
"in the testcase\n";
unsigned OldSize = Functions.size();
ReduceCrashingFunctions(BD, TestFn).reduceList(Functions, Error);
if (Functions.size() < OldSize)
BD.EmitProgressBitcode(BD.getProgram(), "reduced-function");
}
// Attempt to delete entire basic blocks at a time to speed up
// convergence... this actually works by setting the terminator of the blocks
// to a return instruction then running simplifycfg, which can potentially
// shrinks the code dramatically quickly
//
if (!DisableSimplifyCFG && !BugpointIsInterrupted) {
std::vector<const BasicBlock*> Blocks;
for (Function &F : *BD.getProgram())
for (BasicBlock &BB : F)
Blocks.push_back(&BB);
unsigned OldSize = Blocks.size();
ReduceCrashingBlocks(BD, TestFn).reduceList(Blocks, Error);
if (Blocks.size() < OldSize)
BD.EmitProgressBitcode(BD.getProgram(), "reduced-blocks");
}
// Attempt to delete instructions using bisection. This should help out nasty
// cases with large basic blocks where the problem is at one end.
if (!BugpointIsInterrupted) {
std::vector<const Instruction*> Insts;
for (const Function &F : *BD.getProgram())
for (const BasicBlock &BB : F)
for (const Instruction &I : BB)
if (!isa<TerminatorInst>(&I))
Insts.push_back(&I);
ReduceCrashingInstructions(BD, TestFn).reduceList(Insts, Error);
}
// FIXME: This should use the list reducer to converge faster by deleting
// larger chunks of instructions at a time!
unsigned Simplification = 2;
do {
if (BugpointIsInterrupted) break;
--Simplification;
outs() << "\n*** Attempting to reduce testcase by deleting instruc"
<< "tions: Simplification Level #" << Simplification << '\n';
// Now that we have deleted the functions that are unnecessary for the
// program, try to remove instructions that are not necessary to cause the
// crash. To do this, we loop through all of the instructions in the
// remaining functions, deleting them (replacing any values produced with
// nulls), and then running ADCE and SimplifyCFG. If the transformed input
// still triggers failure, keep deleting until we cannot trigger failure
// anymore.
//
unsigned InstructionsToSkipBeforeDeleting = 0;
TryAgain:
// Loop over all of the (non-terminator) instructions remaining in the
// function, attempting to delete them.
unsigned CurInstructionNum = 0;
for (Module::const_iterator FI = BD.getProgram()->begin(),
E = BD.getProgram()->end(); FI != E; ++FI)
if (!FI->isDeclaration())
for (Function::const_iterator BI = FI->begin(), E = FI->end(); BI != E;
++BI)
for (BasicBlock::const_iterator I = BI->begin(), E = --BI->end();
I != E; ++I, ++CurInstructionNum) {
if (InstructionsToSkipBeforeDeleting) {
--InstructionsToSkipBeforeDeleting;
} else {
if (BugpointIsInterrupted) goto ExitLoops;
if (isa<LandingPadInst>(I))
continue;
outs() << "Checking instruction: " << *I;
std::unique_ptr<Module> M =
BD.deleteInstructionFromProgram(&*I, Simplification);
// Find out if the pass still crashes on this pass...
if (TestFn(BD, M.get())) {
// Yup, it does, we delete the old module, and continue trying
// to reduce the testcase...
BD.setNewProgram(M.release());
InstructionsToSkipBeforeDeleting = CurInstructionNum;
goto TryAgain; // I wish I had a multi-level break here!
}
}
}
if (InstructionsToSkipBeforeDeleting) {
InstructionsToSkipBeforeDeleting = 0;
goto TryAgain;
}
} while (Simplification);
ExitLoops:
// Try to clean up the testcase by running funcresolve and globaldce...
if (!BugpointIsInterrupted) {
outs() << "\n*** Attempting to perform final cleanups: ";
Module *M = CloneModule(BD.getProgram());
M = BD.performFinalCleanups(M, true).release();
// Find out if the pass still crashes on the cleaned up program...
if (TestFn(BD, M)) {
BD.setNewProgram(M); // Yup, it does, keep the reduced version...
} else {
delete M;
}
}
BD.EmitProgressBitcode(BD.getProgram(), "reduced-simplified");
return false;
}
/// NaClValueEnumerator - Enumerate module-level information.
NaClValueEnumerator::NaClValueEnumerator(const Module *M) {
// Create map for counting frequency of types, and set field
// TypeCountMap accordingly. Note: Pointer field TypeCountMap is
// used to deal with the fact that types are added through various
// method calls in this routine. Rather than pass it as an argument,
// we use a field. The field is a pointer so that the memory
// footprint of count_map can be garbage collected when this
// constructor completes.
TypeCountMapType count_map;
TypeCountMap = &count_map;
IntPtrType = IntegerType::get(M->getContext(), PNaClIntPtrTypeBitSize);
// Enumerate the functions. Note: We do this before global
// variables, so that global variable initializations can refer to
// the functions without a forward reference.
for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
EnumerateValue(I);
}
// Enumerate the global variables.
FirstGlobalVarID = Values.size();
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
EnumerateValue(I);
NumGlobalVarIDs = Values.size() - FirstGlobalVarID;
// Enumerate the aliases.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I);
// Remember what is the cutoff between globalvalue's and other constants.
unsigned FirstConstant = Values.size();
// Skip global variable initializers since they are handled within
// WriteGlobalVars of file NaClBitcodeWriter.cpp.
// Enumerate the aliasees.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I->getAliasee());
// Insert constants that are named at module level into the slot
// pool so that the module symbol table can refer to them...
EnumerateValueSymbolTable(M->getValueSymbolTable());
// Enumerate types used by function bodies and argument lists.
for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I)
EnumerateType(I->getType());
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
// Don't generate types for elided pointer casts!
if (IsElidedCast(I))
continue;
if (const SwitchInst *SI = dyn_cast<SwitchInst>(I)) {
// Handle switch instruction specially, so that we don't
// write out unnecessary vector/array types used to model case
// selectors.
EnumerateOperandType(SI->getCondition());
} else {
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
EnumerateOperandType(*OI);
}
}
EnumerateType(I->getType());
}
}
// Optimized type indicies to put "common" expected types in with small
// indices.
OptimizeTypes(M);
TypeCountMap = NULL;
// Optimize constant ordering.
OptimizeConstants(FirstConstant, Values.size());
}
void FunctionLoweringInfo::set(const Function &fn, MachineFunction &mf) {
Fn = &fn;
MF = &mf;
RegInfo = &MF->getRegInfo();
// Create a vreg for each argument register that is not dead and is used
// outside of the entry block for the function.
for (Function::const_arg_iterator AI = Fn->arg_begin(), E = Fn->arg_end();
AI != E; ++AI)
if (!isOnlyUsedInEntryBlock(AI, EnableFastISel))
InitializeRegForValue(AI);
// Initialize the mapping of values to registers. This is only set up for
// instruction values that are used outside of the block that defines
// them.
Function::const_iterator BB = Fn->begin(), EB = Fn->end();
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (const AllocaInst *AI = dyn_cast<AllocaInst>(I))
if (const ConstantInt *CUI = dyn_cast<ConstantInt>(AI->getArraySize())) {
const Type *Ty = AI->getAllocatedType();
uint64_t TySize = TLI.getTargetData()->getTypeAllocSize(Ty);
unsigned Align =
std::max((unsigned)TLI.getTargetData()->getPrefTypeAlignment(Ty),
AI->getAlignment());
TySize *= CUI->getZExtValue(); // Get total allocated size.
if (TySize == 0) TySize = 1; // Don't create zero-sized stack objects.
StaticAllocaMap[AI] =
MF->getFrameInfo()->CreateStackObject(TySize, Align, false);
}
for (; BB != EB; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I != E; ++I)
if (isUsedOutsideOfDefiningBlock(I))
if (!isa<AllocaInst>(I) ||
!StaticAllocaMap.count(cast<AllocaInst>(I)))
InitializeRegForValue(I);
// Create an initial MachineBasicBlock for each LLVM BasicBlock in F. This
// also creates the initial PHI MachineInstrs, though none of the input
// operands are populated.
for (BB = Fn->begin(); BB != EB; ++BB) {
MachineBasicBlock *MBB = mf.CreateMachineBasicBlock(BB);
MBBMap[BB] = MBB;
MF->push_back(MBB);
// Transfer the address-taken flag. This is necessary because there could
// be multiple MachineBasicBlocks corresponding to one BasicBlock, and only
// the first one should be marked.
if (BB->hasAddressTaken())
MBB->setHasAddressTaken();
// Create Machine PHI nodes for LLVM PHI nodes, lowering them as
// appropriate.
for (BasicBlock::const_iterator I = BB->begin();
const PHINode *PN = dyn_cast<PHINode>(I); ++I) {
if (PN->use_empty()) continue;
DebugLoc DL = PN->getDebugLoc();
unsigned PHIReg = ValueMap[PN];
assert(PHIReg && "PHI node does not have an assigned virtual register!");
SmallVector<EVT, 4> ValueVTs;
ComputeValueVTs(TLI, PN->getType(), ValueVTs);
for (unsigned vti = 0, vte = ValueVTs.size(); vti != vte; ++vti) {
EVT VT = ValueVTs[vti];
unsigned NumRegisters = TLI.getNumRegisters(Fn->getContext(), VT);
const TargetInstrInfo *TII = MF->getTarget().getInstrInfo();
for (unsigned i = 0; i != NumRegisters; ++i)
BuildMI(MBB, DL, TII->get(TargetOpcode::PHI), PHIReg + i);
PHIReg += NumRegisters;
}
}
}
// Mark landing pad blocks.
for (BB = Fn->begin(); BB != EB; ++BB)
if (const InvokeInst *Invoke = dyn_cast<InvokeInst>(BB->getTerminator()))
MBBMap[Invoke->getSuccessor(1)]->setIsLandingPad();
}
/// CloneAndPruneFunctionInto - This works exactly like CloneFunctionInto,
/// except that it does some simple constant prop and DCE on the fly. The
/// effect of this is to copy significantly less code in cases where (for
/// example) a function call with constant arguments is inlined, and those
/// constant arguments cause a significant amount of code in the callee to be
/// dead. Since this doesn't produce an exact copy of the input, it can't be
/// used for things like CloneFunction or CloneModule.
void llvm::CloneAndPruneFunctionInto(Function *NewFunc, const Function *OldFunc,
ValueToValueMapTy &VMap,
bool ModuleLevelChanges,
SmallVectorImpl<ReturnInst*> &Returns,
const char *NameSuffix,
ClonedCodeInfo *CodeInfo,
const DataLayout *DL,
Instruction *TheCall) {
assert(NameSuffix && "NameSuffix cannot be null!");
#ifndef NDEBUG
for (Function::const_arg_iterator II = OldFunc->arg_begin(),
E = OldFunc->arg_end(); II != E; ++II)
assert(VMap.count(II) && "No mapping from source argument specified!");
#endif
PruningFunctionCloner PFC(NewFunc, OldFunc, VMap, ModuleLevelChanges,
NameSuffix, CodeInfo, DL);
// Clone the entry block, and anything recursively reachable from it.
std::vector<const BasicBlock*> CloneWorklist;
CloneWorklist.push_back(&OldFunc->getEntryBlock());
while (!CloneWorklist.empty()) {
const BasicBlock *BB = CloneWorklist.back();
CloneWorklist.pop_back();
PFC.CloneBlock(BB, CloneWorklist);
}
// Loop over all of the basic blocks in the old function. If the block was
// reachable, we have cloned it and the old block is now in the value map:
// insert it into the new function in the right order. If not, ignore it.
//
// Defer PHI resolution until rest of function is resolved.
SmallVector<const PHINode*, 16> PHIToResolve;
for (Function::const_iterator BI = OldFunc->begin(), BE = OldFunc->end();
BI != BE; ++BI) {
Value *V = VMap[BI];
BasicBlock *NewBB = cast_or_null<BasicBlock>(V);
if (!NewBB) continue; // Dead block.
// Add the new block to the new function.
NewFunc->getBasicBlockList().push_back(NewBB);
// Handle PHI nodes specially, as we have to remove references to dead
// blocks.
for (BasicBlock::const_iterator I = BI->begin(), E = BI->end(); I != E; ++I)
if (const PHINode *PN = dyn_cast<PHINode>(I))
PHIToResolve.push_back(PN);
else
break;
// Finally, remap the terminator instructions, as those can't be remapped
// until all BBs are mapped.
RemapInstruction(NewBB->getTerminator(), VMap,
ModuleLevelChanges ? RF_None : RF_NoModuleLevelChanges);
}
// Defer PHI resolution until rest of function is resolved, PHI resolution
// requires the CFG to be up-to-date.
for (unsigned phino = 0, e = PHIToResolve.size(); phino != e; ) {
const PHINode *OPN = PHIToResolve[phino];
unsigned NumPreds = OPN->getNumIncomingValues();
const BasicBlock *OldBB = OPN->getParent();
BasicBlock *NewBB = cast<BasicBlock>(VMap[OldBB]);
// Map operands for blocks that are live and remove operands for blocks
// that are dead.
for (; phino != PHIToResolve.size() &&
PHIToResolve[phino]->getParent() == OldBB; ++phino) {
OPN = PHIToResolve[phino];
PHINode *PN = cast<PHINode>(VMap[OPN]);
for (unsigned pred = 0, e = NumPreds; pred != e; ++pred) {
Value *V = VMap[PN->getIncomingBlock(pred)];
if (BasicBlock *MappedBlock = cast_or_null<BasicBlock>(V)) {
Value *InVal = MapValue(PN->getIncomingValue(pred),
VMap,
ModuleLevelChanges ? RF_None : RF_NoModuleLevelChanges);
assert(InVal && "Unknown input value?");
PN->setIncomingValue(pred, InVal);
PN->setIncomingBlock(pred, MappedBlock);
} else {
PN->removeIncomingValue(pred, false);
--pred, --e; // Revisit the next entry.
}
}
}
// The loop above has removed PHI entries for those blocks that are dead
// and has updated others. However, if a block is live (i.e. copied over)
// but its terminator has been changed to not go to this block, then our
// phi nodes will have invalid entries. Update the PHI nodes in this
// case.
PHINode *PN = cast<PHINode>(NewBB->begin());
NumPreds = std::distance(pred_begin(NewBB), pred_end(NewBB));
if (NumPreds != PN->getNumIncomingValues()) {
assert(NumPreds < PN->getNumIncomingValues());
// Count how many times each predecessor comes to this block.
std::map<BasicBlock*, unsigned> PredCount;
for (pred_iterator PI = pred_begin(NewBB), E = pred_end(NewBB);
PI != E; ++PI)
--PredCount[*PI];
// Figure out how many entries to remove from each PHI.
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
++PredCount[PN->getIncomingBlock(i)];
// At this point, the excess predecessor entries are positive in the
// map. Loop over all of the PHIs and remove excess predecessor
// entries.
BasicBlock::iterator I = NewBB->begin();
for (; (PN = dyn_cast<PHINode>(I)); ++I) {
for (std::map<BasicBlock*, unsigned>::iterator PCI =PredCount.begin(),
E = PredCount.end(); PCI != E; ++PCI) {
BasicBlock *Pred = PCI->first;
for (unsigned NumToRemove = PCI->second; NumToRemove; --NumToRemove)
PN->removeIncomingValue(Pred, false);
}
}
}
// If the loops above have made these phi nodes have 0 or 1 operand,
// replace them with undef or the input value. We must do this for
// correctness, because 0-operand phis are not valid.
PN = cast<PHINode>(NewBB->begin());
if (PN->getNumIncomingValues() == 0) {
BasicBlock::iterator I = NewBB->begin();
BasicBlock::const_iterator OldI = OldBB->begin();
while ((PN = dyn_cast<PHINode>(I++))) {
Value *NV = UndefValue::get(PN->getType());
PN->replaceAllUsesWith(NV);
assert(VMap[OldI] == PN && "VMap mismatch");
VMap[OldI] = NV;
PN->eraseFromParent();
++OldI;
}
}
}
// Make a second pass over the PHINodes now that all of them have been
// remapped into the new function, simplifying the PHINode and performing any
// recursive simplifications exposed. This will transparently update the
// WeakVH in the VMap. Notably, we rely on that so that if we coalesce
// two PHINodes, the iteration over the old PHIs remains valid, and the
// mapping will just map us to the new node (which may not even be a PHI
// node).
for (unsigned Idx = 0, Size = PHIToResolve.size(); Idx != Size; ++Idx)
if (PHINode *PN = dyn_cast<PHINode>(VMap[PHIToResolve[Idx]]))
recursivelySimplifyInstruction(PN, DL);
// Now that the inlined function body has been fully constructed, go through
// and zap unconditional fall-through branches. This happen all the time when
// specializing code: code specialization turns conditional branches into
// uncond branches, and this code folds them.
Function::iterator Begin = cast<BasicBlock>(VMap[&OldFunc->getEntryBlock()]);
Function::iterator I = Begin;
while (I != NewFunc->end()) {
// Check if this block has become dead during inlining or other
// simplifications. Note that the first block will appear dead, as it has
// not yet been wired up properly.
if (I != Begin && (pred_begin(I) == pred_end(I) ||
I->getSinglePredecessor() == I)) {
BasicBlock *DeadBB = I++;
DeleteDeadBlock(DeadBB);
continue;
}
// We need to simplify conditional branches and switches with a constant
// operand. We try to prune these out when cloning, but if the
// simplification required looking through PHI nodes, those are only
// available after forming the full basic block. That may leave some here,
// and we still want to prune the dead code as early as possible.
ConstantFoldTerminator(I);
BranchInst *BI = dyn_cast<BranchInst>(I->getTerminator());
if (!BI || BI->isConditional()) { ++I; continue; }
BasicBlock *Dest = BI->getSuccessor(0);
if (!Dest->getSinglePredecessor()) {
++I; continue;
}
// We shouldn't be able to get single-entry PHI nodes here, as instsimplify
// above should have zapped all of them..
assert(!isa<PHINode>(Dest->begin()));
// We know all single-entry PHI nodes in the inlined function have been
// removed, so we just need to splice the blocks.
BI->eraseFromParent();
// Make all PHI nodes that referred to Dest now refer to I as their source.
Dest->replaceAllUsesWith(I);
// Move all the instructions in the succ to the pred.
I->getInstList().splice(I->end(), Dest->getInstList());
// Remove the dest block.
Dest->eraseFromParent();
// Do not increment I, iteratively merge all things this block branches to.
}
// Make a final pass over the basic blocks from theh old function to gather
// any return instructions which survived folding. We have to do this here
// because we can iteratively remove and merge returns above.
for (Function::iterator I = cast<BasicBlock>(VMap[&OldFunc->getEntryBlock()]),
E = NewFunc->end();
I != E; ++I)
if (ReturnInst *RI = dyn_cast<ReturnInst>(I->getTerminator()))
Returns.push_back(RI);
}
/// ValueEnumerator - Enumerate module-level information.
ValueEnumerator::ValueEnumerator(const Module *M) {
// Enumerate the global variables.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
EnumerateValue(I);
// Enumerate the functions.
for (Module::const_iterator I = M->begin(), E = M->end(); I != E; ++I) {
EnumerateValue(I);
EnumerateAttributes(cast<Function>(I)->getAttributes());
}
// Enumerate the aliases.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I);
// Remember what is the cutoff between globalvalue's and other constants.
unsigned FirstConstant = Values.size();
// Enumerate the global variable initializers.
for (Module::const_global_iterator I = M->global_begin(),
E = M->global_end(); I != E; ++I)
if (I->hasInitializer())
EnumerateValue(I->getInitializer());
// Enumerate the aliasees.
for (Module::const_alias_iterator I = M->alias_begin(), E = M->alias_end();
I != E; ++I)
EnumerateValue(I->getAliasee());
// Enumerate types used by the type symbol table.
EnumerateTypeSymbolTable(M->getTypeSymbolTable());
// Insert constants and metadata that are named at module level into the slot
// pool so that the module symbol table can refer to them...
EnumerateValueSymbolTable(M->getValueSymbolTable());
EnumerateNamedMetadata(M);
SmallVector<std::pair<unsigned, MDNode*>, 8> MDs;
// Enumerate types used by function bodies and argument lists.
for (Module::const_iterator F = M->begin(), E = M->end(); F != E; ++F) {
for (Function::const_arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I)
EnumerateType(I->getType());
for (Function::const_iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end(); I!=E;++I){
for (User::const_op_iterator OI = I->op_begin(), E = I->op_end();
OI != E; ++OI) {
if (MDNode *MD = dyn_cast<MDNode>(*OI))
if (MD->isFunctionLocal() && MD->getFunction())
// These will get enumerated during function-incorporation.
continue;
EnumerateOperandType(*OI);
}
EnumerateType(I->getType());
if (const CallInst *CI = dyn_cast<CallInst>(I))
EnumerateAttributes(CI->getAttributes());
else if (const InvokeInst *II = dyn_cast<InvokeInst>(I))
EnumerateAttributes(II->getAttributes());
// Enumerate metadata attached with this instruction.
MDs.clear();
I->getAllMetadataOtherThanDebugLoc(MDs);
for (unsigned i = 0, e = MDs.size(); i != e; ++i)
EnumerateMetadata(MDs[i].second);
if (!I->getDebugLoc().isUnknown()) {
MDNode *Scope, *IA;
I->getDebugLoc().getScopeAndInlinedAt(Scope, IA, I->getContext());
if (Scope) EnumerateMetadata(Scope);
if (IA) EnumerateMetadata(IA);
}
}
}
// Optimize constant ordering.
OptimizeConstants(FirstConstant, Values.size());
// Sort the type table by frequency so that most commonly used types are early
// in the table (have low bit-width).
std::stable_sort(Types.begin(), Types.end(), CompareByFrequency);
// Partition the Type ID's so that the single-value types occur before the
// aggregate types. This allows the aggregate types to be dropped from the
// type table after parsing the global variable initializers.
std::partition(Types.begin(), Types.end(), isSingleValueType);
// Now that we rearranged the type table, rebuild TypeMap.
for (unsigned i = 0, e = Types.size(); i != e; ++i)
TypeMap[Types[i].first] = i+1;
}
/// CloneAndPruneFunctionInto - This works exactly like CloneFunctionInto,
/// except that it does some simple constant prop and DCE on the fly. The
/// effect of this is to copy significantly less code in cases where (for
/// example) a function call with constant arguments is inlined, and those
/// constant arguments cause a significant amount of code in the callee to be
/// dead. Since this doesn't produce an exact copy of the input, it can't be
/// used for things like CloneFunction or CloneModule.
void llvm::CloneAndPruneFunctionInto(Function *NewFunc, const Function *OldFunc,
ValueToValueMapTy &VMap,
bool ModuleLevelChanges,
SmallVectorImpl<ReturnInst*> &Returns,
const char *NameSuffix,
ClonedCodeInfo *CodeInfo,
const TargetData *TD,
Instruction *TheCall) {
assert(NameSuffix && "NameSuffix cannot be null!");
#ifndef NDEBUG
for (Function::const_arg_iterator II = OldFunc->arg_begin(),
E = OldFunc->arg_end(); II != E; ++II)
assert(VMap.count(II) && "No mapping from source argument specified!");
#endif
PruningFunctionCloner PFC(NewFunc, OldFunc, VMap, ModuleLevelChanges,
Returns, NameSuffix, CodeInfo, TD);
// Clone the entry block, and anything recursively reachable from it.
std::vector<const BasicBlock*> CloneWorklist;
CloneWorklist.push_back(&OldFunc->getEntryBlock());
while (!CloneWorklist.empty()) {
const BasicBlock *BB = CloneWorklist.back();
CloneWorklist.pop_back();
PFC.CloneBlock(BB, CloneWorklist);
}
// Loop over all of the basic blocks in the old function. If the block was
// reachable, we have cloned it and the old block is now in the value map:
// insert it into the new function in the right order. If not, ignore it.
//
// Defer PHI resolution until rest of function is resolved.
SmallVector<const PHINode*, 16> PHIToResolve;
for (Function::const_iterator BI = OldFunc->begin(), BE = OldFunc->end();
BI != BE; ++BI) {
Value *V = VMap[BI];
BasicBlock *NewBB = cast_or_null<BasicBlock>(V);
if (NewBB == 0) continue; // Dead block.
// Add the new block to the new function.
NewFunc->getBasicBlockList().push_back(NewBB);
// Loop over all of the instructions in the block, fixing up operand
// references as we go. This uses VMap to do all the hard work.
//
BasicBlock::iterator I = NewBB->begin();
DebugLoc TheCallDL;
if (TheCall)
TheCallDL = TheCall->getDebugLoc();
// Handle PHI nodes specially, as we have to remove references to dead
// blocks.
if (PHINode *PN = dyn_cast<PHINode>(I)) {
// Skip over all PHI nodes, remembering them for later.
BasicBlock::const_iterator OldI = BI->begin();
for (; (PN = dyn_cast<PHINode>(I)); ++I, ++OldI)
PHIToResolve.push_back(cast<PHINode>(OldI));
}
// Otherwise, remap the rest of the instructions normally.
for (; I != NewBB->end(); ++I)
RemapInstruction(I, VMap,
ModuleLevelChanges ? RF_None : RF_NoModuleLevelChanges);
}
// Defer PHI resolution until rest of function is resolved, PHI resolution
// requires the CFG to be up-to-date.
for (unsigned phino = 0, e = PHIToResolve.size(); phino != e; ) {
const PHINode *OPN = PHIToResolve[phino];
unsigned NumPreds = OPN->getNumIncomingValues();
const BasicBlock *OldBB = OPN->getParent();
BasicBlock *NewBB = cast<BasicBlock>(VMap[OldBB]);
// Map operands for blocks that are live and remove operands for blocks
// that are dead.
for (; phino != PHIToResolve.size() &&
PHIToResolve[phino]->getParent() == OldBB; ++phino) {
OPN = PHIToResolve[phino];
PHINode *PN = cast<PHINode>(VMap[OPN]);
for (unsigned pred = 0, e = NumPreds; pred != e; ++pred) {
Value *V = VMap[PN->getIncomingBlock(pred)];
if (BasicBlock *MappedBlock = cast_or_null<BasicBlock>(V)) {
Value *InVal = MapValue(PN->getIncomingValue(pred),
VMap,
ModuleLevelChanges ? RF_None : RF_NoModuleLevelChanges);
assert(InVal && "Unknown input value?");
PN->setIncomingValue(pred, InVal);
PN->setIncomingBlock(pred, MappedBlock);
} else {
PN->removeIncomingValue(pred, false);
--pred, --e; // Revisit the next entry.
}
}
}
// The loop above has removed PHI entries for those blocks that are dead
// and has updated others. However, if a block is live (i.e. copied over)
// but its terminator has been changed to not go to this block, then our
// phi nodes will have invalid entries. Update the PHI nodes in this
// case.
PHINode *PN = cast<PHINode>(NewBB->begin());
NumPreds = std::distance(pred_begin(NewBB), pred_end(NewBB));
if (NumPreds != PN->getNumIncomingValues()) {
assert(NumPreds < PN->getNumIncomingValues());
// Count how many times each predecessor comes to this block.
std::map<BasicBlock*, unsigned> PredCount;
for (pred_iterator PI = pred_begin(NewBB), E = pred_end(NewBB);
PI != E; ++PI)
--PredCount[*PI];
// Figure out how many entries to remove from each PHI.
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
++PredCount[PN->getIncomingBlock(i)];
// At this point, the excess predecessor entries are positive in the
// map. Loop over all of the PHIs and remove excess predecessor
// entries.
BasicBlock::iterator I = NewBB->begin();
for (; (PN = dyn_cast<PHINode>(I)); ++I) {
for (std::map<BasicBlock*, unsigned>::iterator PCI =PredCount.begin(),
E = PredCount.end(); PCI != E; ++PCI) {
BasicBlock *Pred = PCI->first;
for (unsigned NumToRemove = PCI->second; NumToRemove; --NumToRemove)
PN->removeIncomingValue(Pred, false);
}
}
}
// If the loops above have made these phi nodes have 0 or 1 operand,
// replace them with undef or the input value. We must do this for
// correctness, because 0-operand phis are not valid.
PN = cast<PHINode>(NewBB->begin());
if (PN->getNumIncomingValues() == 0) {
BasicBlock::iterator I = NewBB->begin();
BasicBlock::const_iterator OldI = OldBB->begin();
while ((PN = dyn_cast<PHINode>(I++))) {
Value *NV = UndefValue::get(PN->getType());
PN->replaceAllUsesWith(NV);
assert(VMap[OldI] == PN && "VMap mismatch");
VMap[OldI] = NV;
PN->eraseFromParent();
++OldI;
}
}
// NOTE: We cannot eliminate single entry phi nodes here, because of
// VMap. Single entry phi nodes can have multiple VMap entries
// pointing at them. Thus, deleting one would require scanning the VMap
// to update any entries in it that would require that. This would be
// really slow.
}
// Now that the inlined function body has been fully constructed, go through
// and zap unconditional fall-through branches. This happen all the time when
// specializing code: code specialization turns conditional branches into
// uncond branches, and this code folds them.
Function::iterator I = cast<BasicBlock>(VMap[&OldFunc->getEntryBlock()]);
while (I != NewFunc->end()) {
BranchInst *BI = dyn_cast<BranchInst>(I->getTerminator());
if (!BI || BI->isConditional()) { ++I; continue; }
// Note that we can't eliminate uncond branches if the destination has
// single-entry PHI nodes. Eliminating the single-entry phi nodes would
// require scanning the VMap to update any entries that point to the phi
// node.
BasicBlock *Dest = BI->getSuccessor(0);
if (!Dest->getSinglePredecessor() || isa<PHINode>(Dest->begin())) {
++I; continue;
}
// We know all single-entry PHI nodes in the inlined function have been
// removed, so we just need to splice the blocks.
BI->eraseFromParent();
// Make all PHI nodes that referred to Dest now refer to I as their source.
Dest->replaceAllUsesWith(I);
// Move all the instructions in the succ to the pred.
I->getInstList().splice(I->end(), Dest->getInstList());
// Remove the dest block.
Dest->eraseFromParent();
// Do not increment I, iteratively merge all things this block branches to.
}
}
void FunctionLoweringInfo::set(const Function &fn, MachineFunction &mf,
SelectionDAG *DAG) {
Fn = &fn;
MF = &mf;
TLI = MF->getSubtarget().getTargetLowering();
RegInfo = &MF->getRegInfo();
MachineModuleInfo &MMI = MF->getMMI();
const TargetFrameLowering *TFI = MF->getSubtarget().getFrameLowering();
unsigned StackAlign = TFI->getStackAlignment();
// Check whether the function can return without sret-demotion.
SmallVector<ISD::OutputArg, 4> Outs;
GetReturnInfo(Fn->getReturnType(), Fn->getAttributes(), Outs, *TLI,
mf.getDataLayout());
CanLowerReturn = TLI->CanLowerReturn(Fn->getCallingConv(), *MF,
Fn->isVarArg(), Outs, Fn->getContext());
// If this personality uses funclets, we need to do a bit more work.
DenseMap<const AllocaInst *, int *> CatchObjects;
EHPersonality Personality = classifyEHPersonality(
Fn->hasPersonalityFn() ? Fn->getPersonalityFn() : nullptr);
if (isFuncletEHPersonality(Personality)) {
// Calculate state numbers if we haven't already.
WinEHFuncInfo &EHInfo = *MF->getWinEHFuncInfo();
if (Personality == EHPersonality::MSVC_CXX)
calculateWinCXXEHStateNumbers(&fn, EHInfo);
else if (isAsynchronousEHPersonality(Personality))
calculateSEHStateNumbers(&fn, EHInfo);
else if (Personality == EHPersonality::CoreCLR)
calculateClrEHStateNumbers(&fn, EHInfo);
// Map all BB references in the WinEH data to MBBs.
for (WinEHTryBlockMapEntry &TBME : EHInfo.TryBlockMap) {
for (WinEHHandlerType &H : TBME.HandlerArray) {
if (const AllocaInst *AI = H.CatchObj.Alloca)
CatchObjects.insert({AI, &H.CatchObj.FrameIndex});
else
H.CatchObj.FrameIndex = INT_MAX;
}
}
}
// Initialize the mapping of values to registers. This is only set up for
// instruction values that are used outside of the block that defines
// them.
Function::const_iterator BB = Fn->begin(), EB = Fn->end();
for (; BB != EB; ++BB)
for (BasicBlock::const_iterator I = BB->begin(), E = BB->end();
I != E; ++I) {
if (const AllocaInst *AI = dyn_cast<AllocaInst>(I)) {
Type *Ty = AI->getAllocatedType();
unsigned Align =
std::max((unsigned)MF->getDataLayout().getPrefTypeAlignment(Ty),
AI->getAlignment());
// Static allocas can be folded into the initial stack frame
// adjustment. For targets that don't realign the stack, don't
// do this if there is an extra alignment requirement.
if (AI->isStaticAlloca() &&
(TFI->isStackRealignable() || (Align <= StackAlign))) {
const ConstantInt *CUI = cast<ConstantInt>(AI->getArraySize());
uint64_t TySize = MF->getDataLayout().getTypeAllocSize(Ty);
TySize *= CUI->getZExtValue(); // Get total allocated size.
if (TySize == 0) TySize = 1; // Don't create zero-sized stack objects.
int FrameIndex = INT_MAX;
auto Iter = CatchObjects.find(AI);
if (Iter != CatchObjects.end() && TLI->needsFixedCatchObjects()) {
FrameIndex = MF->getFrameInfo().CreateFixedObject(
TySize, 0, /*Immutable=*/false, /*isAliased=*/true);
MF->getFrameInfo().setObjectAlignment(FrameIndex, Align);
} else {
FrameIndex =
MF->getFrameInfo().CreateStackObject(TySize, Align, false, AI);
}
StaticAllocaMap[AI] = FrameIndex;
// Update the catch handler information.
if (Iter != CatchObjects.end())
*Iter->second = FrameIndex;
} else {
// FIXME: Overaligned static allocas should be grouped into
// a single dynamic allocation instead of using a separate
// stack allocation for each one.
if (Align <= StackAlign)
Align = 0;
// Inform the Frame Information that we have variable-sized objects.
MF->getFrameInfo().CreateVariableSizedObject(Align ? Align : 1, AI);
}
}
// Look for inline asm that clobbers the SP register.
if (isa<CallInst>(I) || isa<InvokeInst>(I)) {
ImmutableCallSite CS(&*I);
if (isa<InlineAsm>(CS.getCalledValue())) {
unsigned SP = TLI->getStackPointerRegisterToSaveRestore();
const TargetRegisterInfo *TRI = MF->getSubtarget().getRegisterInfo();
std::vector<TargetLowering::AsmOperandInfo> Ops =
TLI->ParseConstraints(Fn->getParent()->getDataLayout(), TRI, CS);
for (size_t I = 0, E = Ops.size(); I != E; ++I) {
TargetLowering::AsmOperandInfo &Op = Ops[I];
if (Op.Type == InlineAsm::isClobber) {
// Clobbers don't have SDValue operands, hence SDValue().
TLI->ComputeConstraintToUse(Op, SDValue(), DAG);
std::pair<unsigned, const TargetRegisterClass *> PhysReg =
TLI->getRegForInlineAsmConstraint(TRI, Op.ConstraintCode,
Op.ConstraintVT);
if (PhysReg.first == SP)
MF->getFrameInfo().setHasOpaqueSPAdjustment(true);
}
}
}
}
// Look for calls to the @llvm.va_start intrinsic. We can omit some
// prologue boilerplate for variadic functions that don't examine their
// arguments.
if (const auto *II = dyn_cast<IntrinsicInst>(I)) {
if (II->getIntrinsicID() == Intrinsic::vastart)
MF->getFrameInfo().setHasVAStart(true);
}
// If we have a musttail call in a variadic function, we need to ensure we
// forward implicit register parameters.
if (const auto *CI = dyn_cast<CallInst>(I)) {
if (CI->isMustTailCall() && Fn->isVarArg())
MF->getFrameInfo().setHasMustTailInVarArgFunc(true);
}
// Mark values used outside their block as exported, by allocating
// a virtual register for them.
if (isUsedOutsideOfDefiningBlock(&*I))
if (!isa<AllocaInst>(I) || !StaticAllocaMap.count(cast<AllocaInst>(I)))
InitializeRegForValue(&*I);
// Collect llvm.dbg.declare information. This is done now instead of
// during the initial isel pass through the IR so that it is done
// in a predictable order.
if (const DbgDeclareInst *DI = dyn_cast<DbgDeclareInst>(I)) {
assert(DI->getVariable() && "Missing variable");
assert(DI->getDebugLoc() && "Missing location");
if (MMI.hasDebugInfo()) {
// Don't handle byval struct arguments or VLAs, for example.
// Non-byval arguments are handled here (they refer to the stack
// temporary alloca at this point).
const Value *Address = DI->getAddress();
if (Address) {
if (const BitCastInst *BCI = dyn_cast<BitCastInst>(Address))
Address = BCI->getOperand(0);
if (const AllocaInst *AI = dyn_cast<AllocaInst>(Address)) {
DenseMap<const AllocaInst *, int>::iterator SI =
StaticAllocaMap.find(AI);
if (SI != StaticAllocaMap.end()) { // Check for VLAs.
int FI = SI->second;
MMI.setVariableDbgInfo(DI->getVariable(), DI->getExpression(),
FI, DI->getDebugLoc());
}
}
}
}
}
// Decide the preferred extend type for a value.
PreferredExtendType[&*I] = getPreferredExtendForValue(&*I);
}
// Create an initial MachineBasicBlock for each LLVM BasicBlock in F. This
// also creates the initial PHI MachineInstrs, though none of the input
// operands are populated.
for (BB = Fn->begin(); BB != EB; ++BB) {
// Don't create MachineBasicBlocks for imaginary EH pad blocks. These blocks
// are really data, and no instructions can live here.
if (BB->isEHPad()) {
const Instruction *I = BB->getFirstNonPHI();
// If this is a non-landingpad EH pad, mark this function as using
// funclets.
// FIXME: SEH catchpads do not create funclets, so we could avoid setting
// this in such cases in order to improve frame layout.
if (!isa<LandingPadInst>(I)) {
MMI.setHasEHFunclets(true);
MF->getFrameInfo().setHasOpaqueSPAdjustment(true);
}
if (isa<CatchSwitchInst>(I)) {
assert(&*BB->begin() == I &&
"WinEHPrepare failed to remove PHIs from imaginary BBs");
continue;
}
if (isa<FuncletPadInst>(I))
assert(&*BB->begin() == I && "WinEHPrepare failed to demote PHIs");
}
MachineBasicBlock *MBB = mf.CreateMachineBasicBlock(&*BB);
MBBMap[&*BB] = MBB;
MF->push_back(MBB);
// Transfer the address-taken flag. This is necessary because there could
// be multiple MachineBasicBlocks corresponding to one BasicBlock, and only
// the first one should be marked.
if (BB->hasAddressTaken())
MBB->setHasAddressTaken();
// Create Machine PHI nodes for LLVM PHI nodes, lowering them as
// appropriate.
for (BasicBlock::const_iterator I = BB->begin();
const PHINode *PN = dyn_cast<PHINode>(I); ++I) {
if (PN->use_empty()) continue;
// Skip empty types
if (PN->getType()->isEmptyTy())
continue;
DebugLoc DL = PN->getDebugLoc();
unsigned PHIReg = ValueMap[PN];
assert(PHIReg && "PHI node does not have an assigned virtual register!");
SmallVector<EVT, 4> ValueVTs;
ComputeValueVTs(*TLI, MF->getDataLayout(), PN->getType(), ValueVTs);
for (unsigned vti = 0, vte = ValueVTs.size(); vti != vte; ++vti) {
EVT VT = ValueVTs[vti];
unsigned NumRegisters = TLI->getNumRegisters(Fn->getContext(), VT);
const TargetInstrInfo *TII = MF->getSubtarget().getInstrInfo();
for (unsigned i = 0; i != NumRegisters; ++i)
BuildMI(MBB, DL, TII->get(TargetOpcode::PHI), PHIReg + i);
PHIReg += NumRegisters;
}
}
}
// Mark landing pad blocks.
SmallVector<const LandingPadInst *, 4> LPads;
for (BB = Fn->begin(); BB != EB; ++BB) {
const Instruction *FNP = BB->getFirstNonPHI();
if (BB->isEHPad() && MBBMap.count(&*BB))
MBBMap[&*BB]->setIsEHPad();
if (const auto *LPI = dyn_cast<LandingPadInst>(FNP))
LPads.push_back(LPI);
}
if (!isFuncletEHPersonality(Personality))
return;
WinEHFuncInfo &EHInfo = *MF->getWinEHFuncInfo();
// Map all BB references in the WinEH data to MBBs.
for (WinEHTryBlockMapEntry &TBME : EHInfo.TryBlockMap) {
for (WinEHHandlerType &H : TBME.HandlerArray) {
if (H.Handler)
H.Handler = MBBMap[H.Handler.get<const BasicBlock *>()];
}
}
for (CxxUnwindMapEntry &UME : EHInfo.CxxUnwindMap)
if (UME.Cleanup)
UME.Cleanup = MBBMap[UME.Cleanup.get<const BasicBlock *>()];
for (SEHUnwindMapEntry &UME : EHInfo.SEHUnwindMap) {
const BasicBlock *BB = UME.Handler.get<const BasicBlock *>();
UME.Handler = MBBMap[BB];
}
for (ClrEHUnwindMapEntry &CME : EHInfo.ClrEHUnwindMap) {
const BasicBlock *BB = CME.Handler.get<const BasicBlock *>();
CME.Handler = MBBMap[BB];
}
}
