void
close_and_advance(Ledger::pointer& ledger, Ledger::pointer& LCL)
{
std::shared_ptr<SHAMap> set = ledger->peekTransactionMap();
CanonicalTXSet retriableTransactions(set->getHash());
Ledger::pointer newLCL = std::make_shared<Ledger>(false, *LCL);
// Set up to write SHAMap changes to our database,
// perform updates, extract changes
applyTransactions(set, newLCL, newLCL, retriableTransactions, false);
newLCL->updateSkipList();
newLCL->setClosed();
newLCL->peekAccountStateMap()->flushDirty(
hotACCOUNT_NODE, newLCL->getLedgerSeq());
newLCL->peekTransactionMap()->flushDirty(
hotTRANSACTION_NODE, newLCL->getLedgerSeq());
using namespace std::chrono;
auto const epoch_offset = days(10957); // 2000-01-01
std::uint32_t closeTime = time_point_cast<seconds> // now
(system_clock::now() - epoch_offset).
time_since_epoch().count();
int closeResolution = seconds(LEDGER_TIME_ACCURACY).count();
bool closeTimeCorrect = true;
newLCL->setAccepted(closeTime, closeResolution, closeTimeCorrect);
LCL = newLCL;
ledger = std::make_shared<Ledger>(false, *LCL);
}
/**
* Instantiate an application and replay a ledger history out
* of the dump file `filename`.
*/
void
LedgerDump::loadTransactions (std::string const& filename)
{
std::ifstream in (filename);
require ((bool)in, "opening file");
std::unique_ptr <Application> app (make_Application ());
app->setup ();
auto &lm = app->getLedgerMaster ();
WriteLog (lsINFO, LedgerDump) << "Loading ledgers from " << filename;
auto nTxs = 0;
// app->setup() when called with START_UP == Config::FRESH calls
// ApplicationImp::startNewLedger(). Unfortunately it starts the new
// ledger at the wrong timestamp, so we call it again once we've read
// the first ledger we're going to apply. However, it's worth
// understanding that startNewLedger() establishes 3 ledgers:
//
// Ledger 0 is the genesis ledger, it's not a real ledger, just a
// number.
//
// Ledger 1 is the root-account deposit ledger, with a single pile of
// currency owned by a single account generated by the seed
// "masterpassword".
//
// Ledger 2 is created and closed immediately on start, not sure why.
//
// Ledger 3 is a new ledger chained to #2 and left open in
// ledgermaster.
//
// Ledger 3 is where replay should be starting, so (once we call
// startNewLedger() again) we pull out ledger #2 and use it as the
// parent of the new ledger 3 we're replaying, and throw away the #3
// that was made by startNewLedger().
Ledger::pointer parentLedger;
while (in)
{
if ((gLedgerSeq & 0xfff) == 0) {
Job j;
app->doSweep (j);
}
Json::Value j = loadJsonRecord (in);
Ledger::pointer deserializedLedger;
SHAMap::pointer txSet;
std::vector<uint256> txOrder;
std::tie (deserializedLedger, txSet, txOrder) =
loadLedgerAndTransactionsFromJSON (*app, j);
if (!parentLedger)
{
if (getConfig ().START_LEDGER.empty ())
{
require (deserializedLedger->getLedgerSeq () == 3,
"Initial ledger isn't seq #3");
// On first iteration, restart the app's view of the ledger
// history at the same instant as the parent close time of the
// first ledger (ledger #3).
app->startNewLedger (deserializedLedger->getParentCloseTimeNC ());
parentLedger = lm.getClosedLedger ();
require (parentLedger->getLedgerSeq () == 2,
"Initial ledger parent isn't seq #2");
}
else
{
// We're being invoked with --ledger, which is where we
// will start replay from.
require (app->loadOldLedger (getConfig ().START_LEDGER, false),
"Reloading old ledger failed.");
parentLedger = lm.getClosedLedger ();
}
auto const parentSeq = parentLedger->getLedgerSeq ();
auto seq = j["seq"].asUInt ();
while (parentSeq + 1 > seq)
{
// Fast-scan JSON records until we hit the right one.
WriteLog (lsINFO, LedgerDump) << "scanning past ledger: "
<< seq;
j = loadJsonRecord (in);
seq = j["seq"].asUInt ();
if (parentSeq + 1 <= seq)
{
require (parentSeq + 1 == seq,
"Missing ledgers between loaded and replay-start");
std::tie (deserializedLedger, txSet, txOrder) =
loadLedgerAndTransactionsFromJSON (*app, j);
}
}
gLedgerSeq = parentSeq;
require(parentLedger->getLedgerSeq () + 1 ==
deserializedLedger->getLedgerSeq (),
"Mismatched ledger-sequence prefix.");
}
Ledger::pointer currentLedger =
boost::make_shared<Ledger> (true, *parentLedger);
currentLedger->setCloseTime (deserializedLedger->getCloseTimeNC ());
currentLedger->setCloseFlags (deserializedLedger->getCloseFlags ());
currentLedger->setParentHash (deserializedLedger->getParentHash ());
WriteLog (lsINFO, LedgerDump) << "loading ledger: "
<< currentLedger->getLedgerSeq();
if (ShouldLog (lsTRACE, LedgerDump))
{
WriteLog (lsTRACE, LedgerDump) << "expecting next ledger:";
WriteLog (lsTRACE, LedgerDump) << deserializedLedger->getJson (0);
WriteLog (lsTRACE, LedgerDump) << "synthetic next ledger:";
WriteLog (lsTRACE, LedgerDump) << currentLedger->getJson (0);
}
gLedgerSeq++;
// Apply transactions, transitioning from one ledger state to next.
WriteLog (lsDEBUG, LedgerDump)
<< "Applying set of " << txOrder.size() << " transactions";
CanonicalTXSet retriableTransactions (txSet->getHash ());
std::set<uint256> failedTransactions;
LedgerConsensus::applyTransactions (txSet, currentLedger, currentLedger,
retriableTransactions, failedTransactions,
false, txOrder);
require (retriableTransactions.empty (), "failed retriable tx set is not empty");
require (failedTransactions.empty (), "failed tx set is not empty");
currentLedger->updateSkipList ();
currentLedger->setClosed ();
currentLedger->setCloseTime (deserializedLedger->getCloseTimeNC ());
int asf = currentLedger->peekAccountStateMap ()->flushDirty (
hotACCOUNT_NODE, currentLedger->getLedgerSeq());
int tmf = currentLedger->peekTransactionMap ()->flushDirty (
hotTRANSACTION_NODE, currentLedger->getLedgerSeq());
nTxs += tmf;
WriteLog (lsDEBUG, LedgerDump) << "Flushed " << asf << " account "
<< "and " << tmf << "transaction nodes";
// Finalize with the LedgerMaster.
currentLedger->setAccepted ();
bool alreadyHadLedger = lm.storeLedger (currentLedger);
assert (! alreadyHadLedger);
lm.pushLedger (currentLedger);
WriteLog (lsTRACE, LedgerDump) << "parent ledger:";
traceLedgerContents (*parentLedger);
WriteLog (lsTRACE, LedgerDump) << "current ledger:";
traceLedgerContents (*currentLedger);
try
{
checkLedgersEqual (*deserializedLedger, *currentLedger);
}
catch (...)
{
WriteLog (lsINFO, LedgerDump) << "bad ledger:";
std::cerr << currentLedger->getJson (LEDGER_JSON_FULL);
throw;
}
parentLedger = currentLedger;
}
WriteLog (lsINFO, LedgerDump) << "Loaded "
<< gLedgerSeq << "ledgers, "
<< nTxs << " transactions from "
<< filename;
exit (0);
}
