bool acceptMatch( const QgsPointLocator::Match& match ) { return match.point() != mPoint; }
QgsPoint QgsMeasureTool::snapPoint( const QPoint& p )
{
QgsPointLocator::Match m = mCanvas->snappingUtils()->snapToMap( p );
return m.isValid() ? m.point() : mCanvas->getCoordinateTransform()->toMapCoordinates( p );
}
void testLayerUpdates()
{
QgsPointLocator loc( mVL );
QgsPointLocator::Match mAddV0 = loc.nearestVertex( QgsPoint( 12, 12 ), 999 );
QVERIFY( mAddV0.isValid() );
QCOMPARE( mAddV0.point(), QgsPoint( 1, 1 ) );
mVL->startEditing();
// add a new feature
QgsFeature ff( 0 );
QgsPolygon polygon;
QgsPolyline polyline;
polyline << QgsPoint( 10, 11 ) << QgsPoint( 11, 10 ) << QgsPoint( 11, 11 ) << QgsPoint( 10, 11 );
polygon << polyline;
ff.setGeometry( QgsGeometry::fromPolygon( polygon ) );
QgsFeatureList flist;
flist << ff;
bool resA = mVL->addFeature( ff );
QVERIFY( resA );
// verify it is added in the point locator
QgsPointLocator::Match mAddV = loc.nearestVertex( QgsPoint( 12, 12 ), 999 );
QVERIFY( mAddV.isValid() );
QCOMPARE( mAddV.point(), QgsPoint( 11, 11 ) );
QgsPointLocator::Match mAddE = loc.nearestEdge( QgsPoint( 11.1, 10.5 ), 999 );
QVERIFY( mAddE.isValid() );
QCOMPARE( mAddE.point(), QgsPoint( 11, 10.5 ) );
QgsPointLocator::MatchList mAddA = loc.pointInPolygon( QgsPoint( 10.8, 10.8 ) );
QVERIFY( mAddA.count() == 1 );
// change geometry
QgsGeometry* newGeom = new QgsGeometry( *ff.constGeometry() );
newGeom->moveVertex( 10, 10, 2 ); // change 11,11 to 10,10
mVL->changeGeometry( ff.id(), newGeom );
delete newGeom;
// verify it is changed in the point locator
QgsPointLocator::Match mChV = loc.nearestVertex( QgsPoint( 12, 12 ), 999 );
QVERIFY( mChV.isValid() );
QVERIFY( mChV.point() != QgsPoint( 11, 11 ) ); // that point does not exist anymore
mChV = loc.nearestVertex( QgsPoint( 9, 9 ), 999 );
QVERIFY( mChV.isValid() );
QVERIFY( mChV.point() == QgsPoint( 10, 10 ) ); // updated point
// delete feature
bool resD = mVL->deleteFeature( ff.id() );
QVERIFY( resD );
// verify it is deleted from the point locator
QgsPointLocator::Match mDelV = loc.nearestVertex( QgsPoint( 12, 12 ), 999 );
QVERIFY( mDelV.isValid() );
QCOMPARE( mDelV.point(), QgsPoint( 1, 1 ) );
mVL->rollBack();
}
bool acceptMatch( const QgsPointLocator::Match& m ) override {
return m.hasEdge();
}
QgsCadUtils::AlignMapPointOutput QgsCadUtils::alignMapPoint( const QgsPointXY &originalMapPoint, const QgsCadUtils::AlignMapPointContext &ctx )
{
QgsCadUtils::AlignMapPointOutput res;
res.valid = true;
res.softLockCommonAngle = -1;
// try to snap to anything
QgsPointLocator::Match snapMatch = ctx.snappingUtils->snapToMap( originalMapPoint );
QgsPointXY point = snapMatch.isValid() ? snapMatch.point() : originalMapPoint;
// try to snap explicitly to a segment - useful for some constraints
QgsPointXY edgePt0, edgePt1;
EdgesOnlyFilter edgesOnlyFilter;
QgsPointLocator::Match edgeMatch = ctx.snappingUtils->snapToMap( originalMapPoint, &edgesOnlyFilter );
if ( edgeMatch.hasEdge() )
edgeMatch.edgePoints( edgePt0, edgePt1 );
res.edgeMatch = edgeMatch;
QgsPointXY previousPt, penultimatePt;
if ( ctx.cadPointList.count() >= 2 )
previousPt = ctx.cadPointList.at( 1 );
if ( ctx.cadPointList.count() >= 3 )
penultimatePt = ctx.cadPointList.at( 2 );
// *****************************
// ---- X constraint
if ( ctx.xConstraint.locked )
{
if ( !ctx.xConstraint.relative )
{
point.setX( ctx.xConstraint.value );
}
else if ( ctx.cadPointList.count() >= 2 )
{
point.setX( previousPt.x() + ctx.xConstraint.value );
}
if ( edgeMatch.hasEdge() && !ctx.yConstraint.locked )
{
// intersect with snapped segment line at X ccordinate
const double dx = edgePt1.x() - edgePt0.x();
if ( dx == 0 )
{
point.setY( edgePt0.y() );
}
else
{
const double dy = edgePt1.y() - edgePt0.y();
point.setY( edgePt0.y() + ( dy * ( point.x() - edgePt0.x() ) ) / dx );
}
}
}
// *****************************
// ---- Y constraint
if ( ctx.yConstraint.locked )
{
if ( !ctx.yConstraint.relative )
{
point.setY( ctx.yConstraint.value );
}
else if ( ctx.cadPointList.count() >= 2 )
{
point.setY( previousPt.y() + ctx.yConstraint.value );
}
if ( edgeMatch.hasEdge() && !ctx.xConstraint.locked )
{
// intersect with snapped segment line at Y ccordinate
const double dy = edgePt1.y() - edgePt0.y();
if ( dy == 0 )
{
point.setX( edgePt0.x() );
}
else
{
const double dx = edgePt1.x() - edgePt0.x();
point.setX( edgePt0.x() + ( dx * ( point.y() - edgePt0.y() ) ) / dy );
}
}
}
// *****************************
// ---- Common Angle constraint
if ( !ctx.angleConstraint.locked && ctx.cadPointList.count() >= 2 && ctx.commonAngleConstraint.locked && ctx.commonAngleConstraint.value != 0 )
{
double commonAngle = ctx.commonAngleConstraint.value * M_PI / 180;
// see if soft common angle constraint should be performed
// only if not in HardLock mode
double softAngle = std::atan2( point.y() - previousPt.y(),
point.x() - previousPt.x() );
double deltaAngle = 0;
if ( ctx.commonAngleConstraint.relative && ctx.cadPointList.count() >= 3 )
{
// compute the angle relative to the last segment (0° is aligned with last segment)
deltaAngle = std::atan2( previousPt.y() - penultimatePt.y(),
previousPt.x() - penultimatePt.x() );
softAngle -= deltaAngle;
}
int quo = std::round( softAngle / commonAngle );
if ( std::fabs( softAngle - quo * commonAngle ) * 180.0 * M_1_PI <= SOFT_CONSTRAINT_TOLERANCE_DEGREES )
{
// also check the distance in pixel to the line, otherwise it's too sticky at long ranges
softAngle = quo * commonAngle;
// http://mathworld.wolfram.com/Point-LineDistance2-Dimensional.html
// use the direction vector (cos(a),sin(a)) from previous point. |x2-x1|=1 since sin2+cos2=1
const double dist = std::fabs( std::cos( softAngle + deltaAngle ) * ( previousPt.y() - point.y() )
- std::sin( softAngle + deltaAngle ) * ( previousPt.x() - point.x() ) );
if ( dist / ctx.mapUnitsPerPixel < SOFT_CONSTRAINT_TOLERANCE_PIXEL )
{
res.softLockCommonAngle = 180.0 / M_PI * softAngle;
}
}
}
// angle can be locked in one of the two ways:
// 1. "hard" lock defined by the user
// 2. "soft" lock from common angle (e.g. 45 degrees)
bool angleLocked = false, angleRelative = false;
int angleValueDeg = 0;
if ( ctx.angleConstraint.locked )
{
angleLocked = true;
angleRelative = ctx.angleConstraint.relative;
angleValueDeg = ctx.angleConstraint.value;
}
else if ( res.softLockCommonAngle != -1 )
{
angleLocked = true;
angleRelative = ctx.commonAngleConstraint.relative;
angleValueDeg = res.softLockCommonAngle;
}
// *****************************
// ---- Angle constraint
// input angles are in degrees
if ( angleLocked )
{
double angleValue = angleValueDeg * M_PI / 180;
if ( angleRelative && ctx.cadPointList.count() >= 3 )
{
// compute the angle relative to the last segment (0° is aligned with last segment)
angleValue += std::atan2( previousPt.y() - penultimatePt.y(),
previousPt.x() - penultimatePt.x() );
}
double cosa = std::cos( angleValue );
double sina = std::sin( angleValue );
double v = ( point.x() - previousPt.x() ) * cosa + ( point.y() - previousPt.y() ) * sina;
if ( ctx.xConstraint.locked && ctx.yConstraint.locked )
{
// do nothing if both X,Y are already locked
}
else if ( ctx.xConstraint.locked )
{
if ( qgsDoubleNear( cosa, 0.0 ) )
{
res.valid = false;
}
else
{
double x = ctx.xConstraint.value;
if ( !ctx.xConstraint.relative )
{
x -= previousPt.x();
}
point.setY( previousPt.y() + x * sina / cosa );
}
}
else if ( ctx.yConstraint.locked )
{
if ( qgsDoubleNear( sina, 0.0 ) )
{
res.valid = false;
}
else
{
double y = ctx.yConstraint.value;
if ( !ctx.yConstraint.relative )
{
y -= previousPt.y();
}
point.setX( previousPt.x() + y * cosa / sina );
}
}
else
{
point.setX( previousPt.x() + cosa * v );
point.setY( previousPt.y() + sina * v );
}
if ( edgeMatch.hasEdge() && !ctx.distanceConstraint.locked )
{
// magnetize to the intersection of the snapped segment and the lockedAngle
// line of previous point + locked angle
const double x1 = previousPt.x();
const double y1 = previousPt.y();
const double x2 = previousPt.x() + cosa;
const double y2 = previousPt.y() + sina;
// line of snapped segment
const double x3 = edgePt0.x();
const double y3 = edgePt0.y();
const double x4 = edgePt1.x();
const double y4 = edgePt1.y();
const double d = ( x1 - x2 ) * ( y3 - y4 ) - ( y1 - y2 ) * ( x3 - x4 );
// do not compute intersection if lines are almost parallel
// this threshold might be adapted
if ( std::fabs( d ) > 0.01 )
{
point.setX( ( ( x3 - x4 ) * ( x1 * y2 - y1 * x2 ) - ( x1 - x2 ) * ( x3 * y4 - y3 * x4 ) ) / d );
point.setY( ( ( y3 - y4 ) * ( x1 * y2 - y1 * x2 ) - ( y1 - y2 ) * ( x3 * y4 - y3 * x4 ) ) / d );
}
}
}
// *****************************
// ---- Distance constraint
if ( ctx.distanceConstraint.locked && ctx.cadPointList.count() >= 2 )
{
if ( ctx.xConstraint.locked || ctx.yConstraint.locked )
{
// perform both to detect errors in constraints
if ( ctx.xConstraint.locked )
{
QgsPointXY verticalPt0( ctx.xConstraint.value, point.y() );
QgsPointXY verticalPt1( ctx.xConstraint.value, point.y() + 1 );
res.valid &= lineCircleIntersection( previousPt, ctx.distanceConstraint.value, verticalPt0, verticalPt1, point );
}
if ( ctx.yConstraint.locked )
{
QgsPointXY horizontalPt0( point.x(), ctx.yConstraint.value );
QgsPointXY horizontalPt1( point.x() + 1, ctx.yConstraint.value );
res.valid &= lineCircleIntersection( previousPt, ctx.distanceConstraint.value, horizontalPt0, horizontalPt1, point );
}
}
else
{
const double dist = std::sqrt( point.sqrDist( previousPt ) );
if ( dist == 0 )
{
// handle case where mouse is over origin and distance constraint is enabled
// take arbitrary horizontal line
point.set( previousPt.x() + ctx.distanceConstraint.value, previousPt.y() );
}
else
{
const double vP = ctx.distanceConstraint.value / dist;
point.set( previousPt.x() + ( point.x() - previousPt.x() ) * vP,
previousPt.y() + ( point.y() - previousPt.y() ) * vP );
}
if ( edgeMatch.hasEdge() && !ctx.angleConstraint.locked )
{
// we will magnietize to the intersection of that segment and the lockedDistance !
res.valid &= lineCircleIntersection( previousPt, ctx.distanceConstraint.value, edgePt0, edgePt1, point );
}
}
}
// *****************************
// ---- calculate CAD values
QgsDebugMsgLevel( QString( "point: %1 %2" ).arg( point.x() ).arg( point.y() ), 4 );
QgsDebugMsgLevel( QString( "previous point: %1 %2" ).arg( previousPt.x() ).arg( previousPt.y() ), 4 );
QgsDebugMsgLevel( QString( "penultimate point: %1 %2" ).arg( penultimatePt.x() ).arg( penultimatePt.y() ), 4 );
//QgsDebugMsg( QString( "dx: %1 dy: %2" ).arg( point.x() - previousPt.x() ).arg( point.y() - previousPt.y() ) );
//QgsDebugMsg( QString( "ddx: %1 ddy: %2" ).arg( previousPt.x() - penultimatePt.x() ).arg( previousPt.y() - penultimatePt.y() ) );
res.finalMapPoint = point;
return res;
}
bool acceptMatch( const QgsPointLocator::Match& match )
{
QgsPoint p1, p2;
match.edgePoints( p1, p2 );
return !( p1 == mP1 && p2 == mP2 ) && !( p1 == mP2 && p2 == mP1 );
}
QgsGeometry QgsMapToolDeletePart::partUnderPoint( QPoint point, QgsFeatureId &fid, int &partNum )
{
QgsFeature f;
QgsGeometry geomPart;
switch ( vlayer->geometryType() )
{
case QgsWkbTypes::PointGeometry:
case QgsWkbTypes::LineGeometry:
{
QgsPointLocator::Match match = mCanvas->snappingUtils()->snapToCurrentLayer( point, QgsPointLocator::Types( QgsPointLocator::Vertex | QgsPointLocator::Edge ) );
if ( !match.isValid() )
return geomPart;
int snapVertex = match.vertexIndex();
vlayer->getFeatures( QgsFeatureRequest().setFilterFid( match.featureId() ) ).nextFeature( f );
QgsGeometry g = f.geometry();
if ( !g.isMultipart() )
{
fid = match.featureId();
return QgsGeometry::fromPointXY( match.point() );
}
if ( g.wkbType() == QgsWkbTypes::MultiPoint || g.wkbType() == QgsWkbTypes::MultiPoint25D )
{
fid = match.featureId();
partNum = snapVertex;
return QgsGeometry::fromPointXY( match.point() );
}
if ( g.wkbType() == QgsWkbTypes::MultiLineString || g.wkbType() == QgsWkbTypes::MultiLineString25D )
{
QgsMultiPolylineXY mline = g.asMultiPolyline();
for ( int part = 0; part < mline.count(); part++ )
{
if ( snapVertex < mline[part].count() )
{
fid = match.featureId();
partNum = part;
return QgsGeometry::fromPolylineXY( mline[part] );
}
snapVertex -= mline[part].count();
}
}
break;
}
case QgsWkbTypes::PolygonGeometry:
{
QgsPointXY layerCoords = toLayerCoordinates( vlayer, point );
double searchRadius = QgsTolerance::vertexSearchRadius( mCanvas->currentLayer(), mCanvas->mapSettings() );
QgsRectangle selectRect( layerCoords.x() - searchRadius, layerCoords.y() - searchRadius,
layerCoords.x() + searchRadius, layerCoords.y() + searchRadius );
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( selectRect ) );
fit.nextFeature( f );
QgsGeometry g = f.geometry();
if ( g.isNull() )
return geomPart;
if ( !g.isMultipart() )
{
fid = f.id();
return geomPart;
}
QgsMultiPolygonXY mpolygon = g.asMultiPolygon();
for ( int part = 0; part < mpolygon.count(); part++ ) // go through the polygons
{
const QgsPolygonXY &polygon = mpolygon[part];
QgsGeometry partGeo = QgsGeometry::fromPolygonXY( polygon );
if ( partGeo.contains( &layerCoords ) )
{
fid = f.id();
partNum = part;
return partGeo;
}
}
break;
}
default:
{
break;
}
}
return geomPart;
}
void QgsMapToolOffsetCurve::canvasReleaseEvent( QgsMapMouseEvent* e )
{
if ( !mCanvas )
{
return;
}
QgsVectorLayer* layer = currentVectorLayer();
if ( !layer )
{
deleteRubberBandAndGeometry();
notifyNotVectorLayer();
return;
}
if ( e->button() == Qt::RightButton )
{
deleteRubberBandAndGeometry();
deleteDistanceWidget();
return;
}
if ( !mOriginalGeometry )
{
deleteRubberBandAndGeometry();
mGeometryModified = false;
mForceCopy = false;
if ( e->button() == Qt::RightButton )
{
return;
}
QgsSnappingUtils* snapping = mCanvas->snappingUtils();
// store previous settings
int oldType;
double oldSearchRadius;
QgsTolerance::UnitType oldSearchRadiusUnit;
QgsSnappingUtils::SnapToMapMode oldMode = snapping->snapToMapMode();
snapping->defaultSettings( oldType, oldSearchRadius, oldSearchRadiusUnit );
// setup new settings (temporary)
QSettings settings;
snapping->setSnapToMapMode( QgsSnappingUtils::SnapAllLayers );
snapping->setDefaultSettings( QgsPointLocator::Edge,
settings.value( "/qgis/digitizing/search_radius_vertex_edit", 10 ).toDouble(),
( QgsTolerance::UnitType ) settings.value( "/qgis/digitizing/search_radius_vertex_edit_unit", QgsTolerance::Pixels ).toInt() );
QgsPointLocator::Match match = snapping->snapToMap( e->pos() );
// restore old settings
snapping->setSnapToMapMode( oldMode );
snapping->setDefaultSettings( oldType, oldSearchRadius, oldSearchRadiusUnit );
if ( match.hasEdge() && match.layer() )
{
mSourceLayerId = match.layer()->id();
QgsFeature fet;
if ( match.layer()->getFeatures( QgsFeatureRequest( match.featureId() ) ).nextFeature( fet ) )
{
mForceCopy = ( e->modifiers() & Qt::ControlModifier ); //no geometry modification if ctrl is pressed
mOriginalGeometry = createOriginGeometry( match.layer(), match, fet );
mRubberBand = createRubberBand();
if ( mRubberBand )
{
mRubberBand->setToGeometry( mOriginalGeometry, layer );
}
mModifiedFeature = fet.id();
createDistanceWidget();
}
}
return;
}
applyOffset();
}