Пример #1
0
/**
  * @brief	Configure CPU clock.
  * @param	None
  * @retval None
  */
void ClockConfigure ( void )
{
	/* Enable HSE (High Speed External) clock */
	RST_CLK_HSEconfig(RST_CLK_HSE_ON);
	if (RST_CLK_HSEstatus() == ERROR) {
		while (1);
	}

	/* Configures the CPU_PLL clock source */
	RST_CLK_CPU_PLLconfig(RST_CLK_CPU_PLLsrcHSEdiv1, RST_CLK_CPU_PLLmul10);

	/* Enables the CPU_PLL */
	RST_CLK_CPU_PLLcmd(ENABLE);
	if (RST_CLK_CPU_PLLstatus() == ERROR) {
		while (1);
	}

	/* Enables the RST_CLK_PCLK_EEPROM */
	RST_CLK_PCLKcmd(RST_CLK_PCLK_EEPROM, ENABLE);
	/* Sets the code latency value */
	EEPROM_SetLatency(EEPROM_Latency_3);

	/* Select the CPU_PLL output as input for CPU_C3_SEL */
	RST_CLK_CPU_PLLuse(ENABLE);
	/* Set CPUClk Prescaler */
	RST_CLK_CPUclkPrescaler(RST_CLK_CPUclkDIV1);

	/* Select the CPU clock source */
	RST_CLK_CPUclkSelection(RST_CLK_CPUclkCPU_C3);
}
Пример #2
0
void BRD_Clock_Init_HSE_PLL(uint32_t PLL_Mul_sub1)
{
  uint32_t freqCPU;
  
	RST_CLK_DeInit();
	
	/* Enable HSE (High Speed External) clock */
	RST_CLK_HSEconfig(RST_CLK_HSE_ON);
	while (RST_CLK_HSEstatus() != SUCCESS);

//	/* Configures the CPU_PLL clock source */
	RST_CLK_CPU_PLLconfig(RST_CLK_CPU_PLLsrcHSEdiv1, PLL_Mul_sub1);

	/* Enables the CPU_PLL */
	RST_CLK_CPU_PLLcmd(ENABLE);
	while (RST_CLK_CPU_PLLstatus() == ERROR);		
	
	/* Enables the RST_CLK_PCLK_EEPROM */
	RST_CLK_PCLKcmd(RST_CLK_PCLK_EEPROM, ENABLE);

	/* Sets the code latency value */
  freqCPU = HSE_Value * (PLL_Mul_sub1 + 1);
	if (freqCPU < 25E+6)
		EEPROM_SetLatency(EEPROM_Latency_0);
	else if (freqCPU < 50E+6)
		EEPROM_SetLatency(EEPROM_Latency_1);
	else if (freqCPU < 75E+6)
		EEPROM_SetLatency(EEPROM_Latency_2);
	else if (freqCPU < 100E+6)
		EEPROM_SetLatency(EEPROM_Latency_3);
	else if (freqCPU < 125E+6)
		EEPROM_SetLatency(EEPROM_Latency_4);
	else //if (PLL_Mul * HSE_Value <= 150E+6)
		EEPROM_SetLatency(EEPROM_Latency_5);

	//	Additional Supply Power
	if (freqCPU < 40E+6)
		SetSelectRI(RI_till_40MHz);
	else if (freqCPU < 80E+6)
		SetSelectRI(RI_till_80MHz);
	else 
		SetSelectRI(RI_over_80MHz);	
		
	/* Select the CPU_PLL output as input for CPU_C3_SEL */
	RST_CLK_CPU_PLLuse(ENABLE);
	/* Set CPUClk Prescaler */
	RST_CLK_CPUclkPrescaler(RST_CLK_CPUclkDIV1);

	/* Select the CPU clock source */
	RST_CLK_CPUclkSelection(RST_CLK_CPUclkCPU_C3);
  
  //  Update System Clock
  BRD_CPU_CLK = freqCPU;  
}