#define WMT_PIN_UART2CTS WMT_PIN(5, 26)
#define WMT_PIN_UART2RXD WMT_PIN(5, 27)
#define WMT_PIN_UART3RTS WMT_PIN(5, 28)
#define WMT_PIN_UART3TXD WMT_PIN(5, 29)
#define WMT_PIN_UART3CTS WMT_PIN(5, 30)
#define WMT_PIN_UART3RXD WMT_PIN(5, 31)
#define WMT_PIN_KPADROW0 WMT_PIN(6, 16)
#define WMT_PIN_KPADROW1 WMT_PIN(6, 17)
#define WMT_PIN_KPADCOL0 WMT_PIN(6, 18)
#define WMT_PIN_KPADCOL1 WMT_PIN(6, 19)
#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
#define WMT_PIN_SD1WP WMT_PIN(7, 13)
static const struct pinctrl_pin_desc wm8650_pins[] = {
PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
PINCTRL_PIN(WMT_PIN_SD1CD, "sd1_cd"),
PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
* edges of the silicon, finger by finger. LTCORNER upper left is pad 0.
* Data taken from the PadRing chart, arranged like this:
*
* 0 ..... 104
* 466 105
* . .
* . .
* 358 224
* 357 .... 225
*/
#define U300_NUM_PADS 467
/* Pad names for the pinmux subsystem */
static const struct pinctrl_pin_desc u300_pads[] = {
/* Pads along the top edge of the chip */
PINCTRL_PIN(0, "P PAD VDD 28"),
PINCTRL_PIN(1, "P PAD GND 28"),
PINCTRL_PIN(2, "PO SIM RST N"),
PINCTRL_PIN(3, "VSSIO 25"),
PINCTRL_PIN(4, "VSSA ADDA ESDSUB"),
PINCTRL_PIN(5, "PWR VSSCOMMON"),
PINCTRL_PIN(6, "PI ADC I1 POS"),
PINCTRL_PIN(7, "PI ADC I1 NEG"),
PINCTRL_PIN(8, "PWR VSSAD0"),
PINCTRL_PIN(9, "PWR VCCAD0"),
PINCTRL_PIN(10, "PI ADC Q1 NEG"),
PINCTRL_PIN(11, "PI ADC Q1 POS"),
PINCTRL_PIN(12, "PWR VDDAD"),
PINCTRL_PIN(13, "PWR GNDAD"),
PINCTRL_PIN(14, "PI ADC I2 POS"),
PINCTRL_PIN(15, "PI ADC I2 NEG"),
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-msm.h"
static const struct pinctrl_pin_desc apq8064_pins[] = {
PINCTRL_PIN(0, "GPIO_0"),
PINCTRL_PIN(1, "GPIO_1"),
PINCTRL_PIN(2, "GPIO_2"),
PINCTRL_PIN(3, "GPIO_3"),
PINCTRL_PIN(4, "GPIO_4"),
PINCTRL_PIN(5, "GPIO_5"),
PINCTRL_PIN(6, "GPIO_6"),
PINCTRL_PIN(7, "GPIO_7"),
PINCTRL_PIN(8, "GPIO_8"),
PINCTRL_PIN(9, "GPIO_9"),
PINCTRL_PIN(10, "GPIO_10"),
PINCTRL_PIN(11, "GPIO_11"),
PINCTRL_PIN(12, "GPIO_12"),
PINCTRL_PIN(13, "GPIO_13"),
PINCTRL_PIN(14, "GPIO_14"),
PINCTRL_PIN(15, "GPIO_15"),
#define BXT_GPI_IE 0x110
#define BXT_COMMUNITY(s, e) \
{ \
.padown_offset = BXT_PAD_OWN, \
.padcfglock_offset = BXT_PADCFGLOCK, \
.hostown_offset = BXT_HOSTSW_OWN, \
.ie_offset = BXT_GPI_IE, \
.gpp_size = 32, \
.pin_base = (s), \
.npins = ((e) - (s) + 1), \
}
/* BXT */
static const struct pinctrl_pin_desc bxt_north_pins[] = {
PINCTRL_PIN(0, "GPIO_0"),
PINCTRL_PIN(1, "GPIO_1"),
PINCTRL_PIN(2, "GPIO_2"),
PINCTRL_PIN(3, "GPIO_3"),
PINCTRL_PIN(4, "GPIO_4"),
PINCTRL_PIN(5, "GPIO_5"),
PINCTRL_PIN(6, "GPIO_6"),
PINCTRL_PIN(7, "GPIO_7"),
PINCTRL_PIN(8, "GPIO_8"),
PINCTRL_PIN(9, "GPIO_9"),
PINCTRL_PIN(10, "GPIO_10"),
PINCTRL_PIN(11, "GPIO_11"),
PINCTRL_PIN(12, "GPIO_12"),
PINCTRL_PIN(13, "GPIO_13"),
PINCTRL_PIN(14, "GPIO_14"),
PINCTRL_PIN(15, "GPIO_15"),
static const struct of_device_id omap_rtc_of_match[] = {
{
.compatible = "ti,am3352-rtc",
.data = &omap_rtc_am3352_type,
}, {
.compatible = "ti,da830-rtc",
.data = &omap_rtc_da830_type,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
static const struct pinctrl_pin_desc rtc_pins_desc[] = {
PINCTRL_PIN(0, "ext_wakeup0"),
PINCTRL_PIN(1, "ext_wakeup1"),
PINCTRL_PIN(2, "ext_wakeup2"),
PINCTRL_PIN(3, "ext_wakeup3"),
};
static int rtc_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
return 0;
}
static const char *rtc_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
return NULL;
}
PXA168_MUX_SSP3,
PXA168_MUX_SSP3_TX,
PXA168_MUX_SSP4,
PXA168_MUX_SSP4_TX,
PXA168_MUX_SSP5,
PXA168_MUX_SSP5_TX,
PXA168_MUX_USB,
PXA168_MUX_JTAG,
PXA168_MUX_RESET,
PXA168_MUX_WAKEUP,
PXA168_MUX_EXT_32K_IN,
PXA168_MUX_NONE = 0xffff,
};
static struct pinctrl_pin_desc pxa168_pads[] = {
PINCTRL_PIN(GPIO0, "GPIO0"),
PINCTRL_PIN(GPIO1, "GPIO1"),
PINCTRL_PIN(GPIO2, "GPIO2"),
PINCTRL_PIN(GPIO3, "GPIO3"),
PINCTRL_PIN(GPIO4, "GPIO4"),
PINCTRL_PIN(GPIO5, "GPIO5"),
PINCTRL_PIN(GPIO6, "GPIO6"),
PINCTRL_PIN(GPIO7, "GPIO7"),
PINCTRL_PIN(GPIO8, "GPIO8"),
PINCTRL_PIN(GPIO9, "GPIO9"),
PINCTRL_PIN(GPIO10, "GPIO10"),
PINCTRL_PIN(GPIO11, "GPIO11"),
PINCTRL_PIN(GPIO12, "GPIO12"),
PINCTRL_PIN(GPIO13, "GPIO13"),
PINCTRL_PIN(GPIO14, "GPIO14"),
PINCTRL_PIN(GPIO15, "GPIO15"),
ZYNQ_PMUX_smc0_nor,
ZYNQ_PMUX_smc0_nor_cs1,
ZYNQ_PMUX_smc0_nor_addr25,
ZYNQ_PMUX_smc0_nand,
ZYNQ_PMUX_ttc0,
ZYNQ_PMUX_ttc1,
ZYNQ_PMUX_uart0,
ZYNQ_PMUX_uart1,
ZYNQ_PMUX_usb0,
ZYNQ_PMUX_usb1,
ZYNQ_PMUX_swdt0,
ZYNQ_PMUX_MAX_FUNC
};
static const struct pinctrl_pin_desc zynq_pins[] = {
PINCTRL_PIN(0, "MIO0"),
PINCTRL_PIN(1, "MIO1"),
PINCTRL_PIN(2, "MIO2"),
PINCTRL_PIN(3, "MIO3"),
PINCTRL_PIN(4, "MIO4"),
PINCTRL_PIN(5, "MIO5"),
PINCTRL_PIN(6, "MIO6"),
PINCTRL_PIN(7, "MIO7"),
PINCTRL_PIN(8, "MIO8"),
PINCTRL_PIN(9, "MIO9"),
PINCTRL_PIN(10, "MIO10"),
PINCTRL_PIN(11, "MIO11"),
PINCTRL_PIN(12, "MIO12"),
PINCTRL_PIN(13, "MIO13"),
PINCTRL_PIN(14, "MIO14"),
PINCTRL_PIN(15, "MIO15"),
/*
* Pinctrl Driver for ADI GPIO2 controller
*
* Copyright 2007-2013 Analog Devices Inc.
*
* Licensed under the GPLv2 or later
*/
#include <asm/portmux.h>
#include "pinctrl-adi2.h"
static const struct pinctrl_pin_desc adi_pads[] = {
PINCTRL_PIN(0, "PA0"),
PINCTRL_PIN(1, "PA1"),
PINCTRL_PIN(2, "PA2"),
PINCTRL_PIN(3, "PG3"),
PINCTRL_PIN(4, "PA4"),
PINCTRL_PIN(5, "PA5"),
PINCTRL_PIN(6, "PA6"),
PINCTRL_PIN(7, "PA7"),
PINCTRL_PIN(8, "PA8"),
PINCTRL_PIN(9, "PA9"),
PINCTRL_PIN(10, "PA10"),
PINCTRL_PIN(11, "PA11"),
PINCTRL_PIN(12, "PA12"),
PINCTRL_PIN(13, "PA13"),
PINCTRL_PIN(14, "PA14"),
PINCTRL_PIN(15, "PA15"),
PINCTRL_PIN(16, "PB0"),
PINCTRL_PIN(17, "PB1"),
PINCTRL_PIN(18, "PB2"),
#define AB9540_PIN_G12 ABX500_GPIO(51)
#define AB9540_PIN_E17 ABX500_GPIO(52)
#define AB9540_PIN_D11 ABX500_GPIO(53)
#define AB9540_PIN_M18 ABX500_GPIO(54)
/* indicates the highest GPIO number */
#define AB9540_GPIO_MAX_NUMBER 54
/*
* The names of the pins are denoted by GPIO number and ball name, even
* though they can be used for other things than GPIO, this is the first
* column in the table of the data sheet and often used on schematics and
* such.
*/
static const struct pinctrl_pin_desc ab9540_pins[] = {
PINCTRL_PIN(AB9540_PIN_R4, "GPIO1_R4"),
PINCTRL_PIN(AB9540_PIN_V3, "GPIO2_V3"),
PINCTRL_PIN(AB9540_PIN_T4, "GPIO3_T4"),
PINCTRL_PIN(AB9540_PIN_T5, "GPIO4_T5"),
/* hole */
PINCTRL_PIN(AB9540_PIN_B18, "GPIO10_B18"),
PINCTRL_PIN(AB9540_PIN_C18, "GPIO11_C18"),
/* hole */
PINCTRL_PIN(AB9540_PIN_D18, "GPIO13_D18"),
PINCTRL_PIN(AB9540_PIN_B19, "GPIO14_B19"),
PINCTRL_PIN(AB9540_PIN_C19, "GPIO15_C19"),
PINCTRL_PIN(AB9540_PIN_D19, "GPIO16_D19"),
PINCTRL_PIN(AB9540_PIN_R3, "GPIO17_R3"),
PINCTRL_PIN(AB9540_PIN_T2, "GPIO18_T2"),
PINCTRL_PIN(AB9540_PIN_U2, "GPIO19_U2"),
PINCTRL_PIN(AB9540_PIN_V2, "GPIO20_V2"),
{
P_PERIPHS_PIN_MUX_0,
P_PERIPHS_PIN_MUX_1,
P_PERIPHS_PIN_MUX_2,
P_PERIPHS_PIN_MUX_3,
P_PERIPHS_PIN_MUX_4,
P_PERIPHS_PIN_MUX_5,
P_PERIPHS_PIN_MUX_6,
P_PERIPHS_PIN_MUX_7,
P_PERIPHS_PIN_MUX_8,
P_PERIPHS_PIN_MUX_9,
P_AO_RTI_PIN_MUX_REG,
};
/* Pad names for the pinmux subsystem */
const static struct pinctrl_pin_desc amlogic_pads[] = {
PINCTRL_PIN(GPIOY_0,"GPIOY_0"),
PINCTRL_PIN(GPIOY_1,"GPIOY_1"),
PINCTRL_PIN(GPIOY_2,"GPIOY_2"),
PINCTRL_PIN(GPIOY_3,"GPIOY_3"),
PINCTRL_PIN(GPIOY_4,"GPIOY_4"),
PINCTRL_PIN(GPIOY_5,"GPIOY_5"),
PINCTRL_PIN(GPIOY_6,"GPIOY_6"),
PINCTRL_PIN(GPIOY_7,"GPIOY_7"),
PINCTRL_PIN(GPIOY_8,"GPIOY_8"),
PINCTRL_PIN(GPIOY_9,"GPIOY_9"),
PINCTRL_PIN(GPIOY_10,"GPIOY_10"),
PINCTRL_PIN(GPIOY_11,"GPIOY_11"),
PINCTRL_PIN(GPIOY_12,"GPIOY_12"),
PINCTRL_PIN(GPIOY_13,"GPIOY_13"),
PINCTRL_PIN(GPIOY_14,"GPIOY_14"),
PINCTRL_PIN(GPIOY_15,"GPIOY_15"),
#define DNV_COMMUNITY(b, s, e, g) \
{ \
.barno = (b), \
.padown_offset = DNV_PAD_OWN, \
.padcfglock_offset = DNV_PADCFGLOCK, \
.hostown_offset = DNV_HOSTSW_OWN, \
.ie_offset = DNV_GPI_IE, \
.pin_base = (s), \
.npins = ((e) - (s) + 1), \
.gpps = (g), \
.ngpps = ARRAY_SIZE(g), \
}
static const struct pinctrl_pin_desc dnv_pins[] = {
/* North ALL */
PINCTRL_PIN(0, "GBE0_SDP0"),
PINCTRL_PIN(1, "GBE1_SDP0"),
PINCTRL_PIN(2, "GBE0_SDP1"),
PINCTRL_PIN(3, "GBE1_SDP1"),
PINCTRL_PIN(4, "GBE0_SDP2"),
PINCTRL_PIN(5, "GBE1_SDP2"),
PINCTRL_PIN(6, "GBE0_SDP3"),
PINCTRL_PIN(7, "GBE1_SDP3"),
PINCTRL_PIN(8, "GBE2_LED0"),
PINCTRL_PIN(9, "GBE2_LED1"),
PINCTRL_PIN(10, "GBE0_I2C_CLK"),
PINCTRL_PIN(11, "GBE0_I2C_DATA"),
PINCTRL_PIN(12, "GBE1_I2C_CLK"),
PINCTRL_PIN(13, "GBE1_I2C_DATA"),
PINCTRL_PIN(14, "NCSI_RXD0"),
PINCTRL_PIN(15, "NCSI_CLK_IN"),
#define AB8505_PIN_L4 ABX500_GPIO(50)
/* hole */
#define AB8505_PIN_D16 ABX500_GPIO(52)
#define AB8505_PIN_D15 ABX500_GPIO(53)
/* indicates the higher GPIO number */
#define AB8505_GPIO_MAX_NUMBER 53
/*
* The names of the pins are denoted by GPIO number and ball name, even
* though they can be used for other things than GPIO, this is the first
* column in the table of the data sheet and often used on schematics and
* such.
*/
static const struct pinctrl_pin_desc ab8505_pins[] = {
PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
/* hole */
PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
/* hole */
PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
/* hole */
PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
/* hole */
PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
/* All non-GPIO pins follow */
#define NUM_GPIOS (TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5 + 1)
#define _PIN(offset) (NUM_GPIOS + (offset))
/* Non-GPIO pins */
#define TEGRA_PIN_CORE_PWR_REQ _PIN(0)
#define TEGRA_PIN_CPU_PWR_REQ _PIN(1)
#define TEGRA_PIN_PWR_INT_N _PIN(2)
#define TEGRA_PIN_RESET_OUT_N _PIN(3)
#define TEGRA_PIN_OWR _PIN(4)
#define TEGRA_PIN_JTAG_RTCK _PIN(5)
#define TEGRA_PIN_CLK_32K_IN _PIN(6)
#define TEGRA_PIN_GMI_CLK_LB _PIN(7)
static const struct pinctrl_pin_desc tegra114_pins[] = {
PINCTRL_PIN(TEGRA_PIN_CLK_32K_OUT_PA0, "CLK_32K_OUT PA0"),
PINCTRL_PIN(TEGRA_PIN_UART3_CTS_N_PA1, "UART3_CTS_N PA1"),
PINCTRL_PIN(TEGRA_PIN_DAP2_FS_PA2, "DAP2_FS PA2"),
PINCTRL_PIN(TEGRA_PIN_DAP2_SCLK_PA3, "DAP2_SCLK PA3"),
PINCTRL_PIN(TEGRA_PIN_DAP2_DIN_PA4, "DAP2_DIN PA4"),
PINCTRL_PIN(TEGRA_PIN_DAP2_DOUT_PA5, "DAP2_DOUT PA5"),
PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_PA6, "SDMMC3_CLK PA6"),
PINCTRL_PIN(TEGRA_PIN_SDMMC3_CMD_PA7, "SDMMC3_CMD PA7"),
PINCTRL_PIN(TEGRA_PIN_GMI_A17_PB0, "GMI_A17 PB0"),
PINCTRL_PIN(TEGRA_PIN_GMI_A18_PB1, "GMI_A18 PB1"),
PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT3_PB4, "SDMMC3_DAT3 PB4"),
PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT2_PB5, "SDMMC3_DAT2 PB5"),
PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT1_PB6, "SDMMC3_DAT1 PB6"),
PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT0_PB7, "SDMMC3_DAT0 PB7"),
PINCTRL_PIN(TEGRA_PIN_UART3_RTS_N_PC0, "UART3_RTS_N PC0"),
PINCTRL_PIN(TEGRA_PIN_UART2_TXD_PC2, "UART2_TXD PC2"),
#define TB10X_PORT3 (32)
#define TB10X_PORT4 (48)
#define TB10X_PORT5 (128)
#define TB10X_PORT6 (64)
#define TB10X_PORT7 (80)
#define TB10X_PORT8 (96)
#define TB10X_PORT9 (112)
#define TB10X_GPIOS (256)
#define PCFG_PORT_BITWIDTH (2)
#define PCFG_PORT_MASK(PORT) \
(((1 << PCFG_PORT_BITWIDTH) - 1) << (PCFG_PORT_BITWIDTH * (PORT)))
static const struct pinctrl_pin_desc tb10x_pins[] = {
/* Port 1 */
PINCTRL_PIN(TB10X_PORT1 + 0, "MICLK_S0"),
PINCTRL_PIN(TB10X_PORT1 + 1, "MISTRT_S0"),
PINCTRL_PIN(TB10X_PORT1 + 2, "MIVAL_S0"),
PINCTRL_PIN(TB10X_PORT1 + 3, "MDI_S0"),
PINCTRL_PIN(TB10X_PORT1 + 4, "GPIOA0"),
PINCTRL_PIN(TB10X_PORT1 + 5, "GPIOA1"),
PINCTRL_PIN(TB10X_PORT1 + 6, "GPIOA2"),
PINCTRL_PIN(TB10X_PORT1 + 7, "MDI_S1"),
PINCTRL_PIN(TB10X_PORT1 + 8, "MIVAL_S1"),
PINCTRL_PIN(TB10X_PORT1 + 9, "MISTRT_S1"),
PINCTRL_PIN(TB10X_PORT1 + 10, "MICLK_S1"),
/* Port 2 */
PINCTRL_PIN(TB10X_PORT2 + 0, "MICLK_S2"),
PINCTRL_PIN(TB10X_PORT2 + 1, "MISTRT_S2"),
PINCTRL_PIN(TB10X_PORT2 + 2, "MIVAL_S2"),
PINCTRL_PIN(TB10X_PORT2 + 3, "MDI_S2"),
#define LBG_COMMUNITY(b, s, e) \
{ \
.barno = (b), \
.padown_offset = LBG_PAD_OWN, \
.padcfglock_offset = LBG_PADCFGLOCK, \
.hostown_offset = LBG_HOSTSW_OWN, \
.ie_offset = LBG_GPI_IE, \
.gpp_size = 24, \
.pin_base = (s), \
.npins = ((e) - (s) + 1), \
}
static const struct pinctrl_pin_desc lbg_pins[] = {
/* GPP_A */
PINCTRL_PIN(0, "RCINB"),
PINCTRL_PIN(1, "LAD_0"),
PINCTRL_PIN(2, "LAD_1"),
PINCTRL_PIN(3, "LAD_2"),
PINCTRL_PIN(4, "LAD_3"),
PINCTRL_PIN(5, "LFRAMEB"),
PINCTRL_PIN(6, "SERIRQ"),
PINCTRL_PIN(7, "PIRQAB"),
PINCTRL_PIN(8, "CLKRUNB"),
PINCTRL_PIN(9, "CLKOUT_LPC_0"),
PINCTRL_PIN(10, "CLKOUT_LPC_1"),
PINCTRL_PIN(11, "PMEB"),
PINCTRL_PIN(12, "BM_BUSYB"),
PINCTRL_PIN(13, "SUSWARNB_SUSPWRDNACK"),
PINCTRL_PIN(14, "ESPI_RESETB"),
PINCTRL_PIN(15, "SUSACKB"),
.barno = (b), \
.padown_offset = CDF_PAD_OWN, \
.padcfglock_offset = CDF_PADCFGLOCK, \
.hostown_offset = CDF_HOSTSW_OWN, \
.is_offset = CDF_GPI_IS, \
.ie_offset = CDF_GPI_IE, \
.pin_base = (s), \
.npins = ((e) - (s) + 1), \
.gpps = (g), \
.ngpps = ARRAY_SIZE(g), \
}
/* Cedar Fork PCH */
static const struct pinctrl_pin_desc cdf_pins[] = {
/* WEST2 */
PINCTRL_PIN(0, "GBE_SDP_TIMESYNC0_S2N"),
PINCTRL_PIN(1, "GBE_SDP_TIMESYNC1_S2N"),
PINCTRL_PIN(2, "GBE_SDP_TIMESYNC2_S2N"),
PINCTRL_PIN(3, "GBE_SDP_TIMESYNC3_S2N"),
PINCTRL_PIN(4, "GBE0_I2C_CLK"),
PINCTRL_PIN(5, "GBE0_I2C_DATA"),
PINCTRL_PIN(6, "GBE1_I2C_CLK"),
PINCTRL_PIN(7, "GBE1_I2C_DATA"),
PINCTRL_PIN(8, "GBE2_I2C_CLK"),
PINCTRL_PIN(9, "GBE2_I2C_DATA"),
PINCTRL_PIN(10, "GBE3_I2C_CLK"),
PINCTRL_PIN(11, "GBE3_I2C_DATA"),
PINCTRL_PIN(12, "GBE0_LED0"),
PINCTRL_PIN(13, "GBE0_LED1"),
PINCTRL_PIN(14, "GBE0_LED2"),
PINCTRL_PIN(15, "GBE1_LED0"),
{ \
.barno = (b), \
.padown_offset = ICL_PAD_OWN, \
.padcfglock_offset = ICL_PADCFGLOCK, \
.hostown_offset = ICL_HOSTSW_OWN, \
.ie_offset = ICL_GPI_IE, \
.pin_base = (s), \
.npins = ((e) - (s) + 1), \
.gpps = (g), \
.ngpps = ARRAY_SIZE(g), \
}
/* Ice Lake-LP */
static const struct pinctrl_pin_desc icllp_pins[] = {
/* GPP_G */
PINCTRL_PIN(0, "SD3_CMD"),
PINCTRL_PIN(1, "SD3_D0"),
PINCTRL_PIN(2, "SD3_D1"),
PINCTRL_PIN(3, "SD3_D2"),
PINCTRL_PIN(4, "SD3_D3"),
PINCTRL_PIN(5, "SD3_CDB"),
PINCTRL_PIN(6, "SD3_CLK"),
PINCTRL_PIN(7, "SD3_WP"),
/* GPP_B */
PINCTRL_PIN(8, "CORE_VID_0"),
PINCTRL_PIN(9, "CORE_VID_1"),
PINCTRL_PIN(10, "VRALERTB"),
PINCTRL_PIN(11, "CPU_GP_2"),
PINCTRL_PIN(12, "CPU_GP_3"),
PINCTRL_PIN(13, "ISH_I2C0_SDA"),
PINCTRL_PIN(14, "ISH_I2C0_SCL"),
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include "pinctrl-spear.h"
#define DRIVER_NAME "spear1340-pinmux"
/* pins */
static const struct pinctrl_pin_desc spear1340_pins[] = {
SPEAR_PIN_0_TO_101,
SPEAR_PIN_102_TO_245,
PINCTRL_PIN(246, "PLGPIO246"),
PINCTRL_PIN(247, "PLGPIO247"),
PINCTRL_PIN(248, "PLGPIO248"),
PINCTRL_PIN(249, "PLGPIO249"),
PINCTRL_PIN(250, "PLGPIO250"),
PINCTRL_PIN(251, "PLGPIO251"),
};
/* In SPEAr1340 there are two levels of pad muxing */
/* - pads as gpio OR peripherals */
#define PAD_FUNCTION_EN_1 0x668
#define PAD_FUNCTION_EN_2 0x66C
#define PAD_FUNCTION_EN_3 0x670
#define PAD_FUNCTION_EN_4 0x674
#define PAD_FUNCTION_EN_5 0x690
#define PAD_FUNCTION_EN_6 0x694
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/bitops.h>
#define DRIVER_NAME "pinmux-sirf"
#define SIRFSOC_NUM_PADS 622
#define SIRFSOC_GPIO_PAD_EN(g) ((g)*0x100 + 0x84)
#define SIRFSOC_RSC_PIN_MUX 0x4
static const struct pinctrl_pin_desc sirfsoc_pads[] = {
PINCTRL_PIN(4, "pwm0"),
PINCTRL_PIN(5, "pwm1"),
PINCTRL_PIN(6, "pwm2"),
PINCTRL_PIN(7, "pwm3"),
PINCTRL_PIN(8, "warm_rst_b"),
PINCTRL_PIN(9, "odo_0"),
PINCTRL_PIN(10, "odo_1"),
PINCTRL_PIN(11, "dr_dir"),
PINCTRL_PIN(13, "scl_1"),
PINCTRL_PIN(15, "sda_1"),
PINCTRL_PIN(16, "x_ldd[16]"),
PINCTRL_PIN(17, "x_ldd[17]"),
PINCTRL_PIN(18, "x_ldd[18]"),
PINCTRL_PIN(19, "x_ldd[19]"),
PINCTRL_PIN(20, "x_ldd[20]"),
PINCTRL_PIN(21, "x_ldd[21]"),
.pin_base = (s), \
.npins = (e) - (s) + 1, \
}
#define MRFLD_FAMILY_PROTECTED(b, s, e) \
{ \
.barno = (b), \
.pin_base = (s), \
.npins = (e) - (s) + 1, \
.protected = true, \
}
static const struct pinctrl_pin_desc mrfld_pins[] = {
/* Family 0: OCP2SSC (0 pins) */
/* Family 1: ULPI (13 pins) */
PINCTRL_PIN(0, "ULPI_CLK"),
PINCTRL_PIN(1, "ULPI_D0"),
PINCTRL_PIN(2, "ULPI_D1"),
PINCTRL_PIN(3, "ULPI_D2"),
PINCTRL_PIN(4, "ULPI_D3"),
PINCTRL_PIN(5, "ULPI_D4"),
PINCTRL_PIN(6, "ULPI_D5"),
PINCTRL_PIN(7, "ULPI_D6"),
PINCTRL_PIN(8, "ULPI_D7"),
PINCTRL_PIN(9, "ULPI_DIR"),
PINCTRL_PIN(10, "ULPI_NXT"),
PINCTRL_PIN(11, "ULPI_REFCLK"),
PINCTRL_PIN(12, "ULPI_STP"),
/* Family 2: eMMC (24 pins) */
PINCTRL_PIN(13, "EMMC_CLK"),
PINCTRL_PIN(14, "EMMC_CMD"),
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/mfd/madera/core.h>
#include <linux/mfd/madera/registers.h>
#include "../pinctrl-utils.h"
#include "pinctrl-madera.h"
/*
* Use pin GPIO names for consistency
* NOTE: IDs are zero-indexed for coding convenience
*/
static const struct pinctrl_pin_desc madera_pins[] = {
PINCTRL_PIN(0, "gpio1"),
PINCTRL_PIN(1, "gpio2"),
PINCTRL_PIN(2, "gpio3"),
PINCTRL_PIN(3, "gpio4"),
PINCTRL_PIN(4, "gpio5"),
PINCTRL_PIN(5, "gpio6"),
PINCTRL_PIN(6, "gpio7"),
PINCTRL_PIN(7, "gpio8"),
PINCTRL_PIN(8, "gpio9"),
PINCTRL_PIN(9, "gpio10"),
PINCTRL_PIN(10, "gpio11"),
PINCTRL_PIN(11, "gpio12"),
PINCTRL_PIN(12, "gpio13"),
PINCTRL_PIN(13, "gpio14"),
PINCTRL_PIN(14, "gpio15"),
PINCTRL_PIN(15, "gpio16"),
#define DB8500_PIN_AD26 _GPIO(261)
#define DB8500_PIN_AE26 _GPIO(262)
#define DB8500_PIN_AG29 _GPIO(263)
#define DB8500_PIN_AE27 _GPIO(264)
#define DB8500_PIN_AD27 _GPIO(265)
#define DB8500_PIN_AC28 _GPIO(266)
#define DB8500_PIN_AC27 _GPIO(267)
/*
* The names of the pins are denoted by GPIO number and ball name, even
* though they can be used for other things than GPIO, this is the first
* column in the table of the data sheet and often used on schematics and
* such.
*/
static const struct pinctrl_pin_desc nmk_db8500_pins[] = {
PINCTRL_PIN(DB8500_PIN_AJ5, "GPIO0_AJ5"),
PINCTRL_PIN(DB8500_PIN_AJ3, "GPIO1_AJ3"),
PINCTRL_PIN(DB8500_PIN_AH4, "GPIO2_AH4"),
PINCTRL_PIN(DB8500_PIN_AH3, "GPIO3_AH3"),
PINCTRL_PIN(DB8500_PIN_AH6, "GPIO4_AH6"),
PINCTRL_PIN(DB8500_PIN_AG6, "GPIO5_AG6"),
PINCTRL_PIN(DB8500_PIN_AF6, "GPIO6_AF6"),
PINCTRL_PIN(DB8500_PIN_AG5, "GPIO7_AG5"),
PINCTRL_PIN(DB8500_PIN_AD5, "GPIO8_AD5"),
PINCTRL_PIN(DB8500_PIN_AE4, "GPIO9_AE4"),
PINCTRL_PIN(DB8500_PIN_AF5, "GPIO10_AF5"),
PINCTRL_PIN(DB8500_PIN_AG4, "GPIO11_AG4"),
PINCTRL_PIN(DB8500_PIN_AC4, "GPIO12_AC4"),
PINCTRL_PIN(DB8500_PIN_AF3, "GPIO13_AF3"),
PINCTRL_PIN(DB8500_PIN_AE3, "GPIO14_AE3"),
PINCTRL_PIN(DB8500_PIN_AC3, "GPIO15_AC3"),
#define WMT_PIN_SD2DATA2 WMT_PIN(6, 5)
#define WMT_PIN_SD2CMD WMT_PIN(6, 6)
#define WMT_PIN_SD2CLK WMT_PIN(6, 7)
#define WMT_PIN_SD2PWR WMT_PIN(6, 9)
#define WMT_PIN_SD1CLK WMT_PIN(7, 0)
#define WMT_PIN_SD1CMD WMT_PIN(7, 1)
#define WMT_PIN_SD1PWR WMT_PIN(7, 10)
#define WMT_PIN_SD1WP WMT_PIN(7, 11)
#define WMT_PIN_SD1CD WMT_PIN(7, 12)
#define WMT_PIN_SPI0SS3 WMT_PIN(7, 24)
#define WMT_PIN_SPI0SS2 WMT_PIN(7, 25)
#define WMT_PIN_PWMOUT1 WMT_PIN(7, 26)
#define WMT_PIN_PWMOUT0 WMT_PIN(7, 27)
static const struct pinctrl_pin_desc wm8750_pins[] = {
PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
PINCTRL_PIN(WMT_PIN_SD0CD, "sd0_cd"),
PINCTRL_PIN(WMT_PIN_VDOUT0, "vdout0"),
PINCTRL_PIN(WMT_PIN_VDOUT1, "vdout1"),
PINCTRL_PIN(WMT_PIN_VDOUT2, "vdout2"),
PINCTRL_PIN(WMT_PIN_VDOUT3, "vdout3"),
PINCTRL_PIN(WMT_PIN_VDOUT4, "vdout4"),
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-msm.h"
static const struct pinctrl_pin_desc ipq8064_pins[] = {
PINCTRL_PIN(0, "GPIO_0"),
PINCTRL_PIN(1, "GPIO_1"),
PINCTRL_PIN(2, "GPIO_2"),
PINCTRL_PIN(3, "GPIO_3"),
PINCTRL_PIN(4, "GPIO_4"),
PINCTRL_PIN(5, "GPIO_5"),
PINCTRL_PIN(6, "GPIO_6"),
PINCTRL_PIN(7, "GPIO_7"),
PINCTRL_PIN(8, "GPIO_8"),
PINCTRL_PIN(9, "GPIO_9"),
PINCTRL_PIN(10, "GPIO_10"),
PINCTRL_PIN(11, "GPIO_11"),
PINCTRL_PIN(12, "GPIO_12"),
PINCTRL_PIN(13, "GPIO_13"),
PINCTRL_PIN(14, "GPIO_14"),
PINCTRL_PIN(15, "GPIO_15"),
#define WMT_PIN_UART2_TXD WMT_PIN(9, 9)
#define WMT_PIN_UART2_CTS WMT_PIN(9, 10)
#define WMT_PIN_UART2_RXD WMT_PIN(9, 11)
#define WMT_PIN_UART3_RTS WMT_PIN(9, 12)
#define WMT_PIN_UART3_TXD WMT_PIN(9, 13)
#define WMT_PIN_UART3_CTS WMT_PIN(9, 14)
#define WMT_PIN_UART3_RXD WMT_PIN(9, 15)
#define WMT_PIN_I2C0SCL WMT_PIN(10, 0)
#define WMT_PIN_I2C0SDA WMT_PIN(10, 1)
#define WMT_PIN_I2C1SCL WMT_PIN(10, 2)
#define WMT_PIN_I2C1SDA WMT_PIN(10, 3)
#define WMT_PIN_I2C2SCL WMT_PIN(10, 4)
#define WMT_PIN_I2C2SDA WMT_PIN(10, 5)
static const struct pinctrl_pin_desc wm8505_pins[] = {
PINCTRL_PIN(WMT_PIN_EXTGPIO0, "extgpio0"),
PINCTRL_PIN(WMT_PIN_EXTGPIO1, "extgpio1"),
PINCTRL_PIN(WMT_PIN_EXTGPIO2, "extgpio2"),
PINCTRL_PIN(WMT_PIN_EXTGPIO3, "extgpio3"),
PINCTRL_PIN(WMT_PIN_EXTGPIO4, "extgpio4"),
PINCTRL_PIN(WMT_PIN_EXTGPIO5, "extgpio5"),
PINCTRL_PIN(WMT_PIN_EXTGPIO6, "extgpio6"),
PINCTRL_PIN(WMT_PIN_EXTGPIO7, "extgpio7"),
PINCTRL_PIN(WMT_PIN_WAKEUP0, "wakeup0"),
PINCTRL_PIN(WMT_PIN_WAKEUP1, "wakeup1"),
PINCTRL_PIN(WMT_PIN_WAKEUP2, "wakeup2"),
PINCTRL_PIN(WMT_PIN_WAKEUP3, "wakeup3"),
PINCTRL_PIN(WMT_PIN_SUSGPIO0, "susgpio0"),
PINCTRL_PIN(WMT_PIN_SDDATA0, "sd_data0"),
PINCTRL_PIN(WMT_PIN_SDDATA1, "sd_data1"),
PINCTRL_PIN(WMT_PIN_SDDATA2, "sd_data2"),
#define SPT_COMMUNITY(b, s, e) \
{ \
.barno = (b), \
.padown_offset = SPT_PAD_OWN, \
.padcfglock_offset = SPT_PADCFGLOCK, \
.hostown_offset = SPT_HOSTSW_OWN, \
.ie_offset = SPT_GPI_IE, \
.gpp_size = 24, \
.pin_base = (s), \
.npins = ((e) - (s) + 1), \
}
/* Sunrisepoint-LP */
static const struct pinctrl_pin_desc sptlp_pins[] = {
/* GPP_A */
PINCTRL_PIN(0, "RCINB"),
PINCTRL_PIN(1, "LAD_0"),
PINCTRL_PIN(2, "LAD_1"),
PINCTRL_PIN(3, "LAD_2"),
PINCTRL_PIN(4, "LAD_3"),
PINCTRL_PIN(5, "LFRAMEB"),
PINCTRL_PIN(6, "SERIQ"),
PINCTRL_PIN(7, "PIRQAB"),
PINCTRL_PIN(8, "CLKRUNB"),
PINCTRL_PIN(9, "CLKOUT_LPC_0"),
PINCTRL_PIN(10, "CLKOUT_LPC_1"),
PINCTRL_PIN(11, "PMEB"),
PINCTRL_PIN(12, "BM_BUSYB"),
PINCTRL_PIN(13, "SUSWARNB_SUS_PWRDNACK"),
PINCTRL_PIN(14, "SUS_STATB"),
PINCTRL_PIN(15, "SUSACKB"),
#define STN8815_PIN_G22 _GPIO(118)
#define STN8815_PIN_U19 _GPIO(119)
#define STN8815_PIN_G19 _GPIO(120)
#define STN8815_PIN_M22 _GPIO(121)
#define STN8815_PIN_M19 _GPIO(122)
#define STN8815_PIN_J22 _GPIO(123)
/* GPIOs 124-127 not routed to pins */
/*
* The names of the pins are denoted by GPIO number and ball name, even
* though they can be used for other things than GPIO, this is the first
* column in the table of the data sheet and often used on schematics and
* such.
*/
static const struct pinctrl_pin_desc nmk_stn8815_pins[] = {
PINCTRL_PIN(STN8815_PIN_B4, "GPIO0_B4"),
PINCTRL_PIN(STN8815_PIN_D5, "GPIO1_D5"),
PINCTRL_PIN(STN8815_PIN_C5, "GPIO2_C5"),
PINCTRL_PIN(STN8815_PIN_A4, "GPIO3_A4"),
PINCTRL_PIN(STN8815_PIN_B5, "GPIO4_B5"),
PINCTRL_PIN(STN8815_PIN_D6, "GPIO5_D6"),
PINCTRL_PIN(STN8815_PIN_C6, "GPIO6_C6"),
PINCTRL_PIN(STN8815_PIN_B6, "GPIO7_B6"),
PINCTRL_PIN(STN8815_PIN_B10, "GPIO8_B10"),
PINCTRL_PIN(STN8815_PIN_A10, "GPIO9_A10"),
PINCTRL_PIN(STN8815_PIN_C11, "GPIO10_C11"),
PINCTRL_PIN(STN8815_PIN_B11, "GPIO11_B11"),
PINCTRL_PIN(STN8815_PIN_A11, "GPIO12_A11"),
PINCTRL_PIN(STN8815_PIN_C12, "GPIO13_C12"),
PINCTRL_PIN(STN8815_PIN_B12, "GPIO14_B12"),
PINCTRL_PIN(STN8815_PIN_A12, "GPIO15_A12"),
struct device *dev;
struct pinctrl_dev *pctl;
struct as3722 *as3722;
struct gpio_chip gpio_chip;
int pins_current_opt[AS3722_PIN_NUM];
const struct as3722_pin_function *functions;
unsigned num_functions;
const struct as3722_pingroup *pin_groups;
int num_pin_groups;
const struct pinctrl_pin_desc *pins;
unsigned num_pins;
struct as3722_gpio_pin_control gpio_control[AS3722_PIN_NUM];
};
static const struct pinctrl_pin_desc as3722_pins_desc[] = {
PINCTRL_PIN(AS3722_PIN_GPIO0, "gpio0"),
PINCTRL_PIN(AS3722_PIN_GPIO1, "gpio1"),
PINCTRL_PIN(AS3722_PIN_GPIO2, "gpio2"),
PINCTRL_PIN(AS3722_PIN_GPIO3, "gpio3"),
PINCTRL_PIN(AS3722_PIN_GPIO4, "gpio4"),
PINCTRL_PIN(AS3722_PIN_GPIO5, "gpio5"),
PINCTRL_PIN(AS3722_PIN_GPIO6, "gpio6"),
PINCTRL_PIN(AS3722_PIN_GPIO7, "gpio7"),
};
static const char * const gpio_groups[] = {
"gpio0",
"gpio1",
"gpio2",
"gpio3",
"gpio4",
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
#include "pinctrl-msm.h"
static const struct pinctrl_pin_desc msm8660_pins[] = {
PINCTRL_PIN(0, "GPIO_0"),
PINCTRL_PIN(1, "GPIO_1"),
PINCTRL_PIN(2, "GPIO_2"),
PINCTRL_PIN(3, "GPIO_3"),
PINCTRL_PIN(4, "GPIO_4"),
PINCTRL_PIN(5, "GPIO_5"),
PINCTRL_PIN(6, "GPIO_6"),
PINCTRL_PIN(7, "GPIO_7"),
PINCTRL_PIN(8, "GPIO_8"),
PINCTRL_PIN(9, "GPIO_9"),
PINCTRL_PIN(10, "GPIO_10"),
PINCTRL_PIN(11, "GPIO_11"),
PINCTRL_PIN(12, "GPIO_12"),
PINCTRL_PIN(13, "GPIO_13"),
PINCTRL_PIN(14, "GPIO_14"),
PINCTRL_PIN(15, "GPIO_15"),
#define AB8540_PIN_K8 ABX500_GPIO(53)
#define AB8540_PIN_J11 ABX500_GPIO(54)
#define AB8540_PIN_AC2 ABX500_GPIO(55)
#define AB8540_PIN_AB2 ABX500_GPIO(56)
/* indicates the highest GPIO number */
#define AB8540_GPIO_MAX_NUMBER 56
/*
* The names of the pins are denoted by GPIO number and ball name, even
* though they can be used for other things than GPIO, this is the first
* column in the table of the data sheet and often used on schematics and
* such.
*/
static const struct pinctrl_pin_desc ab8540_pins[] = {
PINCTRL_PIN(AB8540_PIN_J16, "GPIO1_J16"),
PINCTRL_PIN(AB8540_PIN_D17, "GPIO2_D17"),
PINCTRL_PIN(AB8540_PIN_C12, "GPIO3_C12"),
PINCTRL_PIN(AB8540_PIN_G12, "GPIO4_G12"),
/* hole */
PINCTRL_PIN(AB8540_PIN_D16, "GPIO14_D16"),
PINCTRL_PIN(AB8540_PIN_F15, "GPIO15_F15"),
PINCTRL_PIN(AB8540_PIN_J8, "GPIO16_J8"),
PINCTRL_PIN(AB8540_PIN_K16, "GPIO17_K16"),
PINCTRL_PIN(AB8540_PIN_G15, "GPIO18_G15"),
PINCTRL_PIN(AB8540_PIN_F17, "GPIO19_F17"),
PINCTRL_PIN(AB8540_PIN_E17, "GPIO20_E17"),
/* hole */
PINCTRL_PIN(AB8540_PIN_AA16, "GPIO27_AA16"),
PINCTRL_PIN(AB8540_PIN_W18, "GPIO28_W18"),
PINCTRL_PIN(AB8540_PIN_Y15, "GPIO29_Y15"),
