void MethodHandles::jump_to_lambda_form(MacroAssembler* _masm,
Register recv, Register method_temp,
Register temp2,
bool for_compiler_entry) {
BLOCK_COMMENT("jump_to_lambda_form {");
// This is the initial entry point of a lazy method handle.
// After type checking, it picks up the invoker from the LambdaForm.
assert_different_registers(recv, method_temp, temp2);
assert(recv != noreg, "required register");
assert(method_temp == rmethod, "required register for loading method");
//NOT_PRODUCT({ FlagSetting fs(TraceMethodHandles, true); trace_method_handle(_masm, "LZMH"); });
// Load the invoker, as MH -> MH.form -> LF.vmentry
__ verify_oop(recv);
__ load_heap_oop(method_temp, Address(recv, NONZERO(java_lang_invoke_MethodHandle::form_offset_in_bytes())));
__ verify_oop(method_temp);
__ load_heap_oop(method_temp, Address(method_temp, NONZERO(java_lang_invoke_LambdaForm::vmentry_offset_in_bytes())));
__ verify_oop(method_temp);
// the following assumes that a Method* is normally compressed in the vmtarget field:
__ ldr(method_temp, Address(method_temp, NONZERO(java_lang_invoke_MemberName::vmtarget_offset_in_bytes())));
if (VerifyMethodHandles && !for_compiler_entry) {
// make sure recv is already on stack
__ ldr(temp2, Address(method_temp, Method::const_offset()));
__ load_sized_value(temp2,
Address(temp2, ConstMethod::size_of_parameters_offset()),
sizeof(u2), /*is_signed*/ false);
// assert(sizeof(u2) == sizeof(Method::_size_of_parameters), "");
Label L;
__ ldr(rscratch1, __ argument_address(temp2, -1));
__ cmp(recv, rscratch1);
__ br(Assembler::EQ, L);
__ ldr(r0, __ argument_address(temp2, -1));
__ hlt(0);
__ BIND(L);
}
jump_from_method_handle(_masm, method_temp, temp2, for_compiler_entry);
BLOCK_COMMENT("} jump_to_lambda_form");
}
void MethodHandles::verify_ref_kind(MacroAssembler* _masm, int ref_kind, Register member_reg, Register temp) {
Label L;
BLOCK_COMMENT("verify_ref_kind {");
__ load_sized_value(temp, NONZERO(java_lang_invoke_MemberName::flags_offset_in_bytes()), member_reg,
sizeof(u4), /*is_signed*/ false);
// assert(sizeof(u4) == sizeof(java.lang.invoke.MemberName.flags), "");
__ srwi( temp, temp, java_lang_invoke_MemberName::MN_REFERENCE_KIND_SHIFT);
__ andi(temp, temp, java_lang_invoke_MemberName::MN_REFERENCE_KIND_MASK);
__ cmpwi(CCR1, temp, ref_kind);
__ beq(CCR1, L);
{ char* buf = NEW_C_HEAP_ARRAY(char, 100, mtInternal);
jio_snprintf(buf, 100, "verify_ref_kind expected %x", ref_kind);
if (ref_kind == JVM_REF_invokeVirtual ||
ref_kind == JVM_REF_invokeSpecial)
// could do this for all ref_kinds, but would explode assembly code size
trace_method_handle(_masm, buf);
__ stop(buf);
}
BLOCK_COMMENT("} verify_ref_kind");
__ BIND(L);
}
void MethodHandles::jump_to_lambda_form(MacroAssembler* _masm,
Register recv, Register method_temp,
Register temp2, Register temp3,
bool for_compiler_entry) {
BLOCK_COMMENT("jump_to_lambda_form {");
// This is the initial entry point of a lazy method handle.
// After type checking, it picks up the invoker from the LambdaForm.
assert_different_registers(recv, method_temp, temp2); // temp3 is only passed on
assert(method_temp == R19_method, "required register for loading method");
// Load the invoker, as MH -> MH.form -> LF.vmentry
__ verify_oop(recv);
__ load_heap_oop_not_null(method_temp, NONZERO(java_lang_invoke_MethodHandle::form_offset_in_bytes()), recv, temp2);
__ verify_oop(method_temp);
__ load_heap_oop_not_null(method_temp, NONZERO(java_lang_invoke_LambdaForm::vmentry_offset_in_bytes()), method_temp, temp2);
__ verify_oop(method_temp);
// The following assumes that a Method* is normally compressed in the vmtarget field:
__ ld(method_temp, NONZERO(java_lang_invoke_MemberName::vmtarget_offset_in_bytes()), method_temp);
if (VerifyMethodHandles && !for_compiler_entry) {
// Make sure recv is already on stack.
__ ld(temp2, in_bytes(Method::const_offset()), method_temp);
__ load_sized_value(temp2, in_bytes(ConstMethod::size_of_parameters_offset()), temp2,
sizeof(u2), /*is_signed*/ false);
// assert(sizeof(u2) == sizeof(ConstMethod::_size_of_parameters), "");
Label L;
__ ld(temp2, __ argument_offset(temp2, temp2, 0), CC_INTERP_ONLY(R17_tos) NOT_CC_INTERP(R15_esp));
__ cmpd(CCR1, temp2, recv);
__ beq(CCR1, L);
__ stop("receiver not on stack");
__ BIND(L);
}
jump_from_method_handle(_masm, method_temp, temp2, temp3, for_compiler_entry);
BLOCK_COMMENT("} jump_to_lambda_form");
}
// Code generation
address MethodHandles::generate_method_handle_interpreter_entry(MacroAssembler* _masm,
vmIntrinsics::ID iid) {
const bool not_for_compiler_entry = false; // this is the interpreter entry
assert(is_signature_polymorphic(iid), "expected invoke iid");
if (iid == vmIntrinsics::_invokeGeneric ||
iid == vmIntrinsics::_compiledLambdaForm) {
// Perhaps surprisingly, the symbolic references visible to Java are not directly used.
// They are linked to Java-generated adapters via MethodHandleNatives.linkMethod.
// They all allow an appendix argument.
__ stop("Should not reach here"); // empty stubs make SG sick
return NULL;
}
Register argbase = CC_INTERP_ONLY(R17_tos) NOT_CC_INTERP(R15_esp); // parameter (preserved)
Register argslot = R3;
Register temp1 = R6;
Register param_size = R7;
// here's where control starts out:
__ align(CodeEntryAlignment);
address entry_point = __ pc();
if (VerifyMethodHandles) {
Label L;
BLOCK_COMMENT("verify_intrinsic_id {");
__ load_sized_value(temp1, Method::intrinsic_id_offset_in_bytes(), R19_method,
sizeof(u1), /*is_signed*/ false);
// assert(sizeof(u1) == sizeof(Method::_intrinsic_id), "");
__ cmpwi(CCR1, temp1, (int) iid);
__ beq(CCR1, L);
if (iid == vmIntrinsics::_linkToVirtual ||
iid == vmIntrinsics::_linkToSpecial) {
// could do this for all kinds, but would explode assembly code size
trace_method_handle(_masm, "bad Method*:intrinsic_id");
}
__ stop("bad Method*::intrinsic_id");
__ BIND(L);
BLOCK_COMMENT("} verify_intrinsic_id");
}
// First task: Find out how big the argument list is.
int ref_kind = signature_polymorphic_intrinsic_ref_kind(iid);
assert(ref_kind != 0 || iid == vmIntrinsics::_invokeBasic, "must be _invokeBasic or a linkTo intrinsic");
if (ref_kind == 0 || MethodHandles::ref_kind_has_receiver(ref_kind)) {
__ ld(param_size, in_bytes(Method::const_offset()), R19_method);
__ load_sized_value(param_size, in_bytes(ConstMethod::size_of_parameters_offset()), param_size,
sizeof(u2), /*is_signed*/ false);
// assert(sizeof(u2) == sizeof(ConstMethod::_size_of_parameters), "");
} else {
DEBUG_ONLY(param_size = noreg);
}
Register tmp_mh = noreg;
if (!is_signature_polymorphic_static(iid)) {
__ ld(tmp_mh = temp1, __ argument_offset(param_size, param_size, 0), argbase);
DEBUG_ONLY(param_size = noreg);
}
if (TraceMethodHandles) {
if (tmp_mh != noreg) {
__ mr(R23_method_handle, tmp_mh); // make stub happy
}
trace_method_handle_interpreter_entry(_masm, iid);
}
if (iid == vmIntrinsics::_invokeBasic) {
generate_method_handle_dispatch(_masm, iid, tmp_mh, noreg, not_for_compiler_entry);
} else {
// Adjust argument list by popping the trailing MemberName argument.
Register tmp_recv = noreg;
if (MethodHandles::ref_kind_has_receiver(ref_kind)) {
// Load the receiver (not the MH; the actual MemberName's receiver) up from the interpreter stack.
__ ld(tmp_recv = temp1, __ argument_offset(param_size, param_size, 0), argbase);
DEBUG_ONLY(param_size = noreg);
}
Register R19_member = R19_method; // MemberName ptr; incoming method ptr is dead now
__ ld(R19_member, RegisterOrConstant((intptr_t)8), argbase);
__ add(argbase, Interpreter::stackElementSize, argbase);
generate_method_handle_dispatch(_masm, iid, tmp_recv, R19_member, not_for_compiler_entry);
}
return entry_point;
}
// Code generation
address MethodHandles::generate_method_handle_interpreter_entry(MacroAssembler* _masm,
vmIntrinsics::ID iid) {
const bool not_for_compiler_entry = false; // this is the interpreter entry
assert(is_signature_polymorphic(iid), "expected invoke iid");
if (iid == vmIntrinsics::_invokeGeneric ||
iid == vmIntrinsics::_compiledLambdaForm) {
// Perhaps surprisingly, the symbolic references visible to Java are not directly used.
// They are linked to Java-generated adapters via MethodHandleNatives.linkMethod.
// They all allow an appendix argument.
__ hlt(0); // empty stubs make SG sick
return NULL;
}
// r13: sender SP (must preserve; see prepare_to_jump_from_interpreted)
// rmethod: Method*
// r3: argument locator (parameter slot count, added to rsp)
// r1: used as temp to hold mh or receiver
// r0, r11: garbage temps, blown away
Register argp = r3; // argument list ptr, live on error paths
Register temp = r0;
Register mh = r1; // MH receiver; dies quickly and is recycled
// here's where control starts out:
__ align(CodeEntryAlignment);
address entry_point = __ pc();
if (VerifyMethodHandles) {
assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2");
Label L;
BLOCK_COMMENT("verify_intrinsic_id {");
__ ldrh(rscratch1, Address(rmethod, Method::intrinsic_id_offset_in_bytes()));
__ cmp(rscratch1, (int) iid);
__ br(Assembler::EQ, L);
if (iid == vmIntrinsics::_linkToVirtual ||
iid == vmIntrinsics::_linkToSpecial) {
// could do this for all kinds, but would explode assembly code size
trace_method_handle(_masm, "bad Method*::intrinsic_id");
}
__ hlt(0);
__ bind(L);
BLOCK_COMMENT("} verify_intrinsic_id");
}
// First task: Find out how big the argument list is.
Address r3_first_arg_addr;
int ref_kind = signature_polymorphic_intrinsic_ref_kind(iid);
assert(ref_kind != 0 || iid == vmIntrinsics::_invokeBasic, "must be _invokeBasic or a linkTo intrinsic");
if (ref_kind == 0 || MethodHandles::ref_kind_has_receiver(ref_kind)) {
__ ldr(argp, Address(rmethod, Method::const_offset()));
__ load_sized_value(argp,
Address(argp, ConstMethod::size_of_parameters_offset()),
sizeof(u2), /*is_signed*/ false);
// assert(sizeof(u2) == sizeof(Method::_size_of_parameters), "");
r3_first_arg_addr = __ argument_address(argp, -1);
} else {
DEBUG_ONLY(argp = noreg);
}
if (!is_signature_polymorphic_static(iid)) {
__ ldr(mh, r3_first_arg_addr);
DEBUG_ONLY(argp = noreg);
}
// r3_first_arg_addr is live!
trace_method_handle_interpreter_entry(_masm, iid);
if (iid == vmIntrinsics::_invokeBasic) {
generate_method_handle_dispatch(_masm, iid, mh, noreg, not_for_compiler_entry);
} else {
// Adjust argument list by popping the trailing MemberName argument.
Register recv = noreg;
if (MethodHandles::ref_kind_has_receiver(ref_kind)) {
// Load the receiver (not the MH; the actual MemberName's receiver) up from the interpreter stack.
__ ldr(recv = r2, r3_first_arg_addr);
}
DEBUG_ONLY(argp = noreg);
Register rmember = rmethod; // MemberName ptr; incoming method ptr is dead now
__ pop(rmember); // extract last argument
generate_method_handle_dispatch(_masm, iid, recv, rmember, not_for_compiler_entry);
}
return entry_point;
}
//------------------------------------------------------------------------------
// MethodHandles::generate_method_handle_stub
//
// Generate an "entry" field for a method handle.
// This determines how the method handle will respond to calls.
void MethodHandles::generate_method_handle_stub(MacroAssembler* _masm, MethodHandles::EntryKind ek) {
// Here is the register state during an interpreted call,
// as set up by generate_method_handle_interpreter_entry():
// - rbx: garbage temp (was MethodHandle.invoke methodOop, unused)
// - rcx: receiver method handle
// - rax: method handle type (only used by the check_mtype entry point)
// - rsi/r13: sender SP (must preserve; see prepare_to_jump_from_interpreted)
// - rdx: garbage temp, can blow away
const Register rcx_recv = rcx;
const Register rax_argslot = rax;
const Register rbx_temp = rbx;
const Register rdx_temp = rdx;
// This guy is set up by prepare_to_jump_from_interpreted (from interpreted calls)
// and gen_c2i_adapter (from compiled calls):
const Register saved_last_sp = LP64_ONLY(r13) NOT_LP64(rsi);
// Argument registers for _raise_exception.
// 32-bit: Pass first two oop/int args in registers ECX and EDX.
const Register rarg0_code = LP64_ONLY(j_rarg0) NOT_LP64(rcx);
const Register rarg1_actual = LP64_ONLY(j_rarg1) NOT_LP64(rdx);
const Register rarg2_required = LP64_ONLY(j_rarg2) NOT_LP64(rdi);
assert_different_registers(rarg0_code, rarg1_actual, rarg2_required, saved_last_sp);
guarantee(java_lang_invoke_MethodHandle::vmentry_offset_in_bytes() != 0, "must have offsets");
// some handy addresses
Address rbx_method_fie( rbx, methodOopDesc::from_interpreted_offset() );
Address rbx_method_fce( rbx, methodOopDesc::from_compiled_offset() );
Address rcx_mh_vmtarget( rcx_recv, java_lang_invoke_MethodHandle::vmtarget_offset_in_bytes() );
Address rcx_dmh_vmindex( rcx_recv, java_lang_invoke_DirectMethodHandle::vmindex_offset_in_bytes() );
Address rcx_bmh_vmargslot( rcx_recv, java_lang_invoke_BoundMethodHandle::vmargslot_offset_in_bytes() );
Address rcx_bmh_argument( rcx_recv, java_lang_invoke_BoundMethodHandle::argument_offset_in_bytes() );
Address rcx_amh_vmargslot( rcx_recv, java_lang_invoke_AdapterMethodHandle::vmargslot_offset_in_bytes() );
Address rcx_amh_argument( rcx_recv, java_lang_invoke_AdapterMethodHandle::argument_offset_in_bytes() );
Address rcx_amh_conversion( rcx_recv, java_lang_invoke_AdapterMethodHandle::conversion_offset_in_bytes() );
Address vmarg; // __ argument_address(vmargslot)
const int java_mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
if (have_entry(ek)) {
__ nop(); // empty stubs make SG sick
return;
}
address interp_entry = __ pc();
trace_method_handle(_masm, entry_name(ek));
BLOCK_COMMENT(entry_name(ek));
switch ((int) ek) {
case _raise_exception:
{
// Not a real MH entry, but rather shared code for raising an
// exception. Since we use the compiled entry, arguments are
// expected in compiler argument registers.
assert(raise_exception_method(), "must be set");
assert(raise_exception_method()->from_compiled_entry(), "method must be linked");
const Register rdi_pc = rax;
__ pop(rdi_pc); // caller PC
__ mov(rsp, saved_last_sp); // cut the stack back to where the caller started
Register rbx_method = rbx_temp;
Label L_no_method;
// FIXME: fill in _raise_exception_method with a suitable java.lang.invoke method
__ movptr(rbx_method, ExternalAddress((address) &_raise_exception_method));
__ testptr(rbx_method, rbx_method);
__ jccb(Assembler::zero, L_no_method);
const int jobject_oop_offset = 0;
__ movptr(rbx_method, Address(rbx_method, jobject_oop_offset)); // dereference the jobject
__ testptr(rbx_method, rbx_method);
__ jccb(Assembler::zero, L_no_method);
__ verify_oop(rbx_method);
NOT_LP64(__ push(rarg2_required));
__ push(rdi_pc); // restore caller PC
__ jmp(rbx_method_fce); // jump to compiled entry
// Do something that is at least causes a valid throw from the interpreter.
__ bind(L_no_method);
__ push(rarg2_required);
__ push(rarg1_actual);
__ jump(ExternalAddress(Interpreter::throw_WrongMethodType_entry()));
}
break;
case _invokestatic_mh:
case _invokespecial_mh:
{
Register rbx_method = rbx_temp;
__ load_heap_oop(rbx_method, rcx_mh_vmtarget); // target is a methodOop
__ verify_oop(rbx_method);
// same as TemplateTable::invokestatic or invokespecial,
// minus the CP setup and profiling:
if (ek == _invokespecial_mh) {
// Must load & check the first argument before entering the target method.
__ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
__ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
__ null_check(rcx_recv);
__ verify_oop(rcx_recv);
}
__ jmp(rbx_method_fie);
}
break;
case _invokevirtual_mh:
{
// same as TemplateTable::invokevirtual,
// minus the CP setup and profiling:
// pick out the vtable index and receiver offset from the MH,
// and then we can discard it:
__ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
Register rbx_index = rbx_temp;
__ movl(rbx_index, rcx_dmh_vmindex);
// Note: The verifier allows us to ignore rcx_mh_vmtarget.
__ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
__ null_check(rcx_recv, oopDesc::klass_offset_in_bytes());
// get receiver klass
Register rax_klass = rax_argslot;
__ load_klass(rax_klass, rcx_recv);
__ verify_oop(rax_klass);
// get target methodOop & entry point
const int base = instanceKlass::vtable_start_offset() * wordSize;
assert(vtableEntry::size() * wordSize == wordSize, "adjust the scaling in the code below");
Address vtable_entry_addr(rax_klass,
rbx_index, Address::times_ptr,
base + vtableEntry::method_offset_in_bytes());
Register rbx_method = rbx_temp;
__ movptr(rbx_method, vtable_entry_addr);
__ verify_oop(rbx_method);
__ jmp(rbx_method_fie);
}
break;
case _invokeinterface_mh:
{
// same as TemplateTable::invokeinterface,
// minus the CP setup and profiling:
// pick out the interface and itable index from the MH.
__ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
Register rdx_intf = rdx_temp;
Register rbx_index = rbx_temp;
__ load_heap_oop(rdx_intf, rcx_mh_vmtarget);
__ movl(rbx_index, rcx_dmh_vmindex);
__ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
__ null_check(rcx_recv, oopDesc::klass_offset_in_bytes());
// get receiver klass
Register rax_klass = rax_argslot;
__ load_klass(rax_klass, rcx_recv);
__ verify_oop(rax_klass);
Register rdi_temp = rdi;
Register rbx_method = rbx_index;
// get interface klass
Label no_such_interface;
__ verify_oop(rdx_intf);
__ lookup_interface_method(rax_klass, rdx_intf,
// note: next two args must be the same:
rbx_index, rbx_method,
rdi_temp,
no_such_interface);
__ verify_oop(rbx_method);
__ jmp(rbx_method_fie);
__ hlt();
__ bind(no_such_interface);
// Throw an exception.
// For historical reasons, it will be IncompatibleClassChangeError.
__ mov(rbx_temp, rcx_recv); // rarg2_required might be RCX
assert_different_registers(rarg2_required, rbx_temp);
__ movptr(rarg2_required, Address(rdx_intf, java_mirror_offset)); // required interface
__ mov( rarg1_actual, rbx_temp); // bad receiver
__ movl( rarg0_code, (int) Bytecodes::_invokeinterface); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
}
break;
case _bound_ref_mh:
case _bound_int_mh:
case _bound_long_mh:
case _bound_ref_direct_mh:
case _bound_int_direct_mh:
case _bound_long_direct_mh:
{
bool direct_to_method = (ek >= _bound_ref_direct_mh);
BasicType arg_type = T_ILLEGAL;
int arg_mask = _INSERT_NO_MASK;
int arg_slots = -1;
get_ek_bound_mh_info(ek, arg_type, arg_mask, arg_slots);
// make room for the new argument:
__ movl(rax_argslot, rcx_bmh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
insert_arg_slots(_masm, arg_slots * stack_move_unit(), arg_mask, rax_argslot, rbx_temp, rdx_temp);
// store bound argument into the new stack slot:
__ load_heap_oop(rbx_temp, rcx_bmh_argument);
if (arg_type == T_OBJECT) {
__ movptr(Address(rax_argslot, 0), rbx_temp);
} else {
Address prim_value_addr(rbx_temp, java_lang_boxing_object::value_offset_in_bytes(arg_type));
const int arg_size = type2aelembytes(arg_type);
__ load_sized_value(rdx_temp, prim_value_addr, arg_size, is_signed_subword_type(arg_type), rbx_temp);
__ store_sized_value(Address(rax_argslot, 0), rdx_temp, arg_size, rbx_temp);
}
if (direct_to_method) {
Register rbx_method = rbx_temp;
__ load_heap_oop(rbx_method, rcx_mh_vmtarget);
__ verify_oop(rbx_method);
__ jmp(rbx_method_fie);
} else {
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ verify_oop(rcx_recv);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
}
break;
case _adapter_retype_only:
case _adapter_retype_raw:
// immediately jump to the next MH layer:
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ verify_oop(rcx_recv);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
// This is OK when all parameter types widen.
// It is also OK when a return type narrows.
break;
case _adapter_check_cast:
{
// temps:
Register rbx_klass = rbx_temp; // interesting AMH data
// check a reference argument before jumping to the next layer of MH:
__ movl(rax_argslot, rcx_amh_vmargslot);
vmarg = __ argument_address(rax_argslot);
// What class are we casting to?
__ load_heap_oop(rbx_klass, rcx_amh_argument); // this is a Class object!
__ load_heap_oop(rbx_klass, Address(rbx_klass, java_lang_Class::klass_offset_in_bytes()));
Label done;
__ movptr(rdx_temp, vmarg);
__ testptr(rdx_temp, rdx_temp);
__ jcc(Assembler::zero, done); // no cast if null
__ load_klass(rdx_temp, rdx_temp);
// live at this point:
// - rbx_klass: klass required by the target method
// - rdx_temp: argument klass to test
// - rcx_recv: adapter method handle
__ check_klass_subtype(rdx_temp, rbx_klass, rax_argslot, done);
// If we get here, the type check failed!
// Call the wrong_method_type stub, passing the failing argument type in rax.
Register rax_mtype = rax_argslot;
__ movl(rax_argslot, rcx_amh_vmargslot); // reload argslot field
__ movptr(rdx_temp, vmarg);
assert_different_registers(rarg2_required, rdx_temp);
__ load_heap_oop(rarg2_required, rcx_amh_argument); // required class
__ mov( rarg1_actual, rdx_temp); // bad object
__ movl( rarg0_code, (int) Bytecodes::_checkcast); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
__ bind(done);
// get the new MH:
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_prim_to_prim:
case _adapter_ref_to_prim:
// handled completely by optimized cases
__ stop("init_AdapterMethodHandle should not issue this");
break;
case _adapter_opt_i2i: // optimized subcase of adapt_prim_to_prim
//case _adapter_opt_f2i: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_l2i: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_unboxi: // optimized subcase of adapt_ref_to_prim
{
// perform an in-place conversion to int or an int subword
__ movl(rax_argslot, rcx_amh_vmargslot);
vmarg = __ argument_address(rax_argslot);
switch (ek) {
case _adapter_opt_i2i:
__ movl(rdx_temp, vmarg);
break;
case _adapter_opt_l2i:
{
// just delete the extra slot; on a little-endian machine we keep the first
__ lea(rax_argslot, __ argument_address(rax_argslot, 1));
remove_arg_slots(_masm, -stack_move_unit(),
rax_argslot, rbx_temp, rdx_temp);
vmarg = Address(rax_argslot, -Interpreter::stackElementSize);
__ movl(rdx_temp, vmarg);
}
break;
case _adapter_opt_unboxi:
{
// Load the value up from the heap.
__ movptr(rdx_temp, vmarg);
int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_INT);
#ifdef ASSERT
for (int bt = T_BOOLEAN; bt < T_INT; bt++) {
if (is_subword_type(BasicType(bt)))
assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(BasicType(bt)), "");
}
#endif
__ null_check(rdx_temp, value_offset);
__ movl(rdx_temp, Address(rdx_temp, value_offset));
// We load this as a word. Because we are little-endian,
// the low bits will be correct, but the high bits may need cleaning.
// The vminfo will guide us to clean those bits.
}
break;
default:
ShouldNotReachHere();
}
// Do the requested conversion and store the value.
Register rbx_vminfo = rbx_temp;
__ movl(rbx_vminfo, rcx_amh_conversion);
assert(CONV_VMINFO_SHIFT == 0, "preshifted");
// get the new MH:
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
// (now we are done with the old MH)
// original 32-bit vmdata word must be of this form:
// | MBZ:6 | signBitCount:8 | srcDstTypes:8 | conversionOp:8 |
__ xchgptr(rcx, rbx_vminfo); // free rcx for shifts
__ shll(rdx_temp /*, rcx*/);
Label zero_extend, done;
__ testl(rcx, CONV_VMINFO_SIGN_FLAG);
__ jccb(Assembler::zero, zero_extend);
// this path is taken for int->byte, int->short
__ sarl(rdx_temp /*, rcx*/);
__ jmpb(done);
__ bind(zero_extend);
// this is taken for int->char
__ shrl(rdx_temp /*, rcx*/);
__ bind(done);
__ movl(vmarg, rdx_temp); // Store the value.
__ xchgptr(rcx, rbx_vminfo); // restore rcx_recv
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_opt_i2l: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_unboxl: // optimized subcase of adapt_ref_to_prim
{
// perform an in-place int-to-long or ref-to-long conversion
__ movl(rax_argslot, rcx_amh_vmargslot);
// on a little-endian machine we keep the first slot and add another after
__ lea(rax_argslot, __ argument_address(rax_argslot, 1));
insert_arg_slots(_masm, stack_move_unit(), _INSERT_INT_MASK,
rax_argslot, rbx_temp, rdx_temp);
Address vmarg1(rax_argslot, -Interpreter::stackElementSize);
Address vmarg2 = vmarg1.plus_disp(Interpreter::stackElementSize);
switch (ek) {
case _adapter_opt_i2l:
{
#ifdef _LP64
__ movslq(rdx_temp, vmarg1); // Load sign-extended
__ movq(vmarg1, rdx_temp); // Store into first slot
#else
__ movl(rdx_temp, vmarg1);
__ sarl(rdx_temp, BitsPerInt - 1); // __ extend_sign()
__ movl(vmarg2, rdx_temp); // store second word
#endif
}
break;
case _adapter_opt_unboxl:
{
// Load the value up from the heap.
__ movptr(rdx_temp, vmarg1);
int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_LONG);
assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(T_DOUBLE), "");
__ null_check(rdx_temp, value_offset);
#ifdef _LP64
__ movq(rbx_temp, Address(rdx_temp, value_offset));
__ movq(vmarg1, rbx_temp);
#else
__ movl(rbx_temp, Address(rdx_temp, value_offset + 0*BytesPerInt));
__ movl(rdx_temp, Address(rdx_temp, value_offset + 1*BytesPerInt));
__ movl(vmarg1, rbx_temp);
__ movl(vmarg2, rdx_temp);
#endif
}
break;
default:
ShouldNotReachHere();
}
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_opt_f2d: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_d2f: // optimized subcase of adapt_prim_to_prim
{
// perform an in-place floating primitive conversion
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot, 1));
if (ek == _adapter_opt_f2d) {
insert_arg_slots(_masm, stack_move_unit(), _INSERT_INT_MASK,
rax_argslot, rbx_temp, rdx_temp);
}
Address vmarg(rax_argslot, -Interpreter::stackElementSize);
#ifdef _LP64
if (ek == _adapter_opt_f2d) {
__ movflt(xmm0, vmarg);
__ cvtss2sd(xmm0, xmm0);
__ movdbl(vmarg, xmm0);
} else {
__ movdbl(xmm0, vmarg);
__ cvtsd2ss(xmm0, xmm0);
__ movflt(vmarg, xmm0);
}
#else //_LP64
if (ek == _adapter_opt_f2d) {
__ fld_s(vmarg); // load float to ST0
__ fstp_s(vmarg); // store single
} else {
__ fld_d(vmarg); // load double to ST0
__ fstp_s(vmarg); // store single
}
#endif //_LP64
if (ek == _adapter_opt_d2f) {
remove_arg_slots(_masm, -stack_move_unit(),
rax_argslot, rbx_temp, rdx_temp);
}
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_prim_to_ref:
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
break;
case _adapter_swap_args:
case _adapter_rot_args:
// handled completely by optimized cases
__ stop("init_AdapterMethodHandle should not issue this");
break;
case _adapter_opt_swap_1:
case _adapter_opt_swap_2:
case _adapter_opt_rot_1_up:
case _adapter_opt_rot_1_down:
case _adapter_opt_rot_2_up:
case _adapter_opt_rot_2_down:
{
int swap_bytes = 0, rotate = 0;
get_ek_adapter_opt_swap_rot_info(ek, swap_bytes, rotate);
// 'argslot' is the position of the first argument to swap
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
// 'vminfo' is the second
Register rbx_destslot = rbx_temp;
__ movl(rbx_destslot, rcx_amh_conversion);
assert(CONV_VMINFO_SHIFT == 0, "preshifted");
__ andl(rbx_destslot, CONV_VMINFO_MASK);
__ lea(rbx_destslot, __ argument_address(rbx_destslot));
DEBUG_ONLY(verify_argslot(_masm, rbx_destslot, "swap point must fall within current frame"));
if (!rotate) {
for (int i = 0; i < swap_bytes; i += wordSize) {
__ movptr(rdx_temp, Address(rax_argslot , i));
__ push(rdx_temp);
__ movptr(rdx_temp, Address(rbx_destslot, i));
__ movptr(Address(rax_argslot, i), rdx_temp);
__ pop(rdx_temp);
__ movptr(Address(rbx_destslot, i), rdx_temp);
}
} else {
// push the first chunk, which is going to get overwritten
for (int i = swap_bytes; (i -= wordSize) >= 0; ) {
__ movptr(rdx_temp, Address(rax_argslot, i));
__ push(rdx_temp);
}
if (rotate > 0) {
// rotate upward
__ subptr(rax_argslot, swap_bytes);
#ifdef ASSERT
{
// Verify that argslot > destslot, by at least swap_bytes.
Label L_ok;
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::aboveEqual, L_ok);
__ stop("source must be above destination (upward rotation)");
__ bind(L_ok);
}
#endif
// work argslot down to destslot, copying contiguous data upwards
// pseudo-code:
// rax = src_addr - swap_bytes
// rbx = dest_addr
// while (rax >= rbx) *(rax + swap_bytes) = *(rax + 0), rax--;
Label loop;
__ bind(loop);
__ movptr(rdx_temp, Address(rax_argslot, 0));
__ movptr(Address(rax_argslot, swap_bytes), rdx_temp);
__ addptr(rax_argslot, -wordSize);
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::aboveEqual, loop);
} else {
__ addptr(rax_argslot, swap_bytes);
#ifdef ASSERT
{
// Verify that argslot < destslot, by at least swap_bytes.
Label L_ok;
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::belowEqual, L_ok);
__ stop("source must be below destination (downward rotation)");
__ bind(L_ok);
}
#endif
// work argslot up to destslot, copying contiguous data downwards
// pseudo-code:
// rax = src_addr + swap_bytes
// rbx = dest_addr
// while (rax <= rbx) *(rax - swap_bytes) = *(rax + 0), rax++;
Label loop;
__ bind(loop);
__ movptr(rdx_temp, Address(rax_argslot, 0));
__ movptr(Address(rax_argslot, -swap_bytes), rdx_temp);
__ addptr(rax_argslot, wordSize);
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::belowEqual, loop);
}
// pop the original first chunk into the destination slot, now free
for (int i = 0; i < swap_bytes; i += wordSize) {
__ pop(rdx_temp);
__ movptr(Address(rbx_destslot, i), rdx_temp);
}
}
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_dup_args:
{
// 'argslot' is the position of the first argument to duplicate
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
// 'stack_move' is negative number of words to duplicate
Register rdx_stack_move = rdx_temp;
__ movl2ptr(rdx_stack_move, rcx_amh_conversion);
__ sarptr(rdx_stack_move, CONV_STACK_MOVE_SHIFT);
int argslot0_num = 0;
Address argslot0 = __ argument_address(RegisterOrConstant(argslot0_num));
assert(argslot0.base() == rsp, "");
int pre_arg_size = argslot0.disp();
assert(pre_arg_size % wordSize == 0, "");
assert(pre_arg_size > 0, "must include PC");
// remember the old rsp+1 (argslot[0])
Register rbx_oldarg = rbx_temp;
__ lea(rbx_oldarg, argslot0);
// move rsp down to make room for dups
__ lea(rsp, Address(rsp, rdx_stack_move, Address::times_ptr));
// compute the new rsp+1 (argslot[0])
Register rdx_newarg = rdx_temp;
__ lea(rdx_newarg, argslot0);
__ push(rdi); // need a temp
// (preceding push must be done after arg addresses are taken!)
// pull down the pre_arg_size data (PC)
for (int i = -pre_arg_size; i < 0; i += wordSize) {
__ movptr(rdi, Address(rbx_oldarg, i));
__ movptr(Address(rdx_newarg, i), rdi);
}
// copy from rax_argslot[0...] down to new_rsp[1...]
// pseudo-code:
// rbx = old_rsp+1
// rdx = new_rsp+1
// rax = argslot
// while (rdx < rbx) *rdx++ = *rax++
Label loop;
__ bind(loop);
__ movptr(rdi, Address(rax_argslot, 0));
__ movptr(Address(rdx_newarg, 0), rdi);
__ addptr(rax_argslot, wordSize);
__ addptr(rdx_newarg, wordSize);
__ cmpptr(rdx_newarg, rbx_oldarg);
__ jccb(Assembler::less, loop);
__ pop(rdi); // restore temp
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_drop_args:
{
// 'argslot' is the position of the first argument to nuke
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
__ push(rdi); // need a temp
// (must do previous push after argslot address is taken)
// 'stack_move' is number of words to drop
Register rdi_stack_move = rdi;
__ movl2ptr(rdi_stack_move, rcx_amh_conversion);
__ sarptr(rdi_stack_move, CONV_STACK_MOVE_SHIFT);
remove_arg_slots(_masm, rdi_stack_move,
rax_argslot, rbx_temp, rdx_temp);
__ pop(rdi); // restore temp
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_collect_args:
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
break;
case _adapter_spread_args:
// handled completely by optimized cases
__ stop("init_AdapterMethodHandle should not issue this");
break;
case _adapter_opt_spread_0:
case _adapter_opt_spread_1:
case _adapter_opt_spread_more:
{
// spread an array out into a group of arguments
int length_constant = get_ek_adapter_opt_spread_info(ek);
// find the address of the array argument
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
// grab some temps
{ __ push(rsi); __ push(rdi); }
// (preceding pushes must be done after argslot address is taken!)
#define UNPUSH_RSI_RDI \
{ __ pop(rdi); __ pop(rsi); }
// arx_argslot points both to the array and to the first output arg
vmarg = Address(rax_argslot, 0);
// Get the array value.
Register rsi_array = rsi;
Register rdx_array_klass = rdx_temp;
BasicType elem_type = T_OBJECT;
int length_offset = arrayOopDesc::length_offset_in_bytes();
int elem0_offset = arrayOopDesc::base_offset_in_bytes(elem_type);
__ movptr(rsi_array, vmarg);
Label skip_array_check;
if (length_constant == 0) {
__ testptr(rsi_array, rsi_array);
__ jcc(Assembler::zero, skip_array_check);
}
__ null_check(rsi_array, oopDesc::klass_offset_in_bytes());
__ load_klass(rdx_array_klass, rsi_array);
// Check the array type.
Register rbx_klass = rbx_temp;
__ load_heap_oop(rbx_klass, rcx_amh_argument); // this is a Class object!
__ load_heap_oop(rbx_klass, Address(rbx_klass, java_lang_Class::klass_offset_in_bytes()));
Label ok_array_klass, bad_array_klass, bad_array_length;
__ check_klass_subtype(rdx_array_klass, rbx_klass, rdi, ok_array_klass);
// If we get here, the type check failed!
__ jmp(bad_array_klass);
__ bind(ok_array_klass);
// Check length.
if (length_constant >= 0) {
__ cmpl(Address(rsi_array, length_offset), length_constant);
} else {
Register rbx_vminfo = rbx_temp;
__ movl(rbx_vminfo, rcx_amh_conversion);
assert(CONV_VMINFO_SHIFT == 0, "preshifted");
__ andl(rbx_vminfo, CONV_VMINFO_MASK);
__ cmpl(rbx_vminfo, Address(rsi_array, length_offset));
}
__ jcc(Assembler::notEqual, bad_array_length);
Register rdx_argslot_limit = rdx_temp;
// Array length checks out. Now insert any required stack slots.
if (length_constant == -1) {
// Form a pointer to the end of the affected region.
__ lea(rdx_argslot_limit, Address(rax_argslot, Interpreter::stackElementSize));
// 'stack_move' is negative number of words to insert
Register rdi_stack_move = rdi;
__ movl2ptr(rdi_stack_move, rcx_amh_conversion);
__ sarptr(rdi_stack_move, CONV_STACK_MOVE_SHIFT);
Register rsi_temp = rsi_array; // spill this
insert_arg_slots(_masm, rdi_stack_move, -1,
rax_argslot, rbx_temp, rsi_temp);
// reload the array (since rsi was killed)
__ movptr(rsi_array, vmarg);
} else if (length_constant > 1) {
int arg_mask = 0;
int new_slots = (length_constant - 1);
for (int i = 0; i < new_slots; i++) {
arg_mask <<= 1;
arg_mask |= _INSERT_REF_MASK;
}
insert_arg_slots(_masm, new_slots * stack_move_unit(), arg_mask,
rax_argslot, rbx_temp, rdx_temp);
} else if (length_constant == 1) {
// no stack resizing required
} else if (length_constant == 0) {
remove_arg_slots(_masm, -stack_move_unit(),
rax_argslot, rbx_temp, rdx_temp);
}
// Copy from the array to the new slots.
// Note: Stack change code preserves integrity of rax_argslot pointer.
// So even after slot insertions, rax_argslot still points to first argument.
if (length_constant == -1) {
// [rax_argslot, rdx_argslot_limit) is the area we are inserting into.
Register rsi_source = rsi_array;
__ lea(rsi_source, Address(rsi_array, elem0_offset));
Label loop;
__ bind(loop);
__ movptr(rbx_temp, Address(rsi_source, 0));
__ movptr(Address(rax_argslot, 0), rbx_temp);
__ addptr(rsi_source, type2aelembytes(elem_type));
__ addptr(rax_argslot, Interpreter::stackElementSize);
__ cmpptr(rax_argslot, rdx_argslot_limit);
__ jccb(Assembler::less, loop);
} else if (length_constant == 0) {
__ bind(skip_array_check);
// nothing to copy
} else {
int elem_offset = elem0_offset;
int slot_offset = 0;
for (int index = 0; index < length_constant; index++) {
__ movptr(rbx_temp, Address(rsi_array, elem_offset));
__ movptr(Address(rax_argslot, slot_offset), rbx_temp);
elem_offset += type2aelembytes(elem_type);
slot_offset += Interpreter::stackElementSize;
}
}
// Arguments are spread. Move to next method handle.
UNPUSH_RSI_RDI;
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
__ bind(bad_array_klass);
UNPUSH_RSI_RDI;
assert(!vmarg.uses(rarg2_required), "must be different registers");
__ movptr(rarg2_required, Address(rdx_array_klass, java_mirror_offset)); // required type
__ movptr(rarg1_actual, vmarg); // bad array
__ movl( rarg0_code, (int) Bytecodes::_aaload); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
__ bind(bad_array_length);
UNPUSH_RSI_RDI;
assert(!vmarg.uses(rarg2_required), "must be different registers");
__ mov (rarg2_required, rcx_recv); // AMH requiring a certain length
__ movptr(rarg1_actual, vmarg); // bad array
__ movl( rarg0_code, (int) Bytecodes::_arraylength); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
#undef UNPUSH_RSI_RDI
}
break;
case _adapter_flyby:
case _adapter_ricochet:
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
break;
default: ShouldNotReachHere();
}
__ hlt();
address me_cookie = MethodHandleEntry::start_compiled_entry(_masm, interp_entry);
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
init_entry(ek, MethodHandleEntry::finish_compiled_entry(_masm, me_cookie));
}