int mtk_wdt_boot_check(void)
{
unsigned int wdt_sta = mtk_wdt_check_status();
#if 0
if (wdt_sta == MTK_WDT_STATUS_HWWDT_RST) { /* For E1 bug, that SW reset value is 0xC000, we using "==" to check */
/* Time out reboot always by pass power key */
print ("TO reset, need bypass power key\n");
return WDT_BY_PASS_PWK_REBOOT;
} else if (wdt_sta & MTK_WDT_STATUS_SWWDT_RST) {
#endif
/*
* For DA download hope to timeout reboot, and boot to u-boot/kernel configurable reason,
* we set both timeout reboot and software reboot can check whether bypass power key.
*/
if (wdt_sta & (MTK_WDT_STATUS_HWWDT_RST|MTK_WDT_STATUS_SWWDT_RST|MTK_WDT_STATUS_PCMWDT_RST|MTK_WDT_STATUS_SPMWDT_RST)) {
if (rgu_mode & MTK_WDT_MODE_AUTO_RESTART) {
/* HW/SW reboot, and auto restart is set, means bypass power key */
print ("SW RST with bypass power key\n");
return WDT_BY_PASS_PWK_REBOOT;
} else {
print ("SW RST without bypass power key\n");
return WDT_NORMAL_REBOOT;
}
}
return WDT_NOT_WDT_REBOOT;
}
void mtk_wdt_init(void)
{
#if defined(CONFIG_EMULATION_EARLY_PORTING)
print("==== Dump RGU Reg ========\n");
print("RGU MODE: %x\n", DRV_Reg32(MTK_WDT_MODE));
print("RGU LENGTH: %x\n", DRV_Reg32(MTK_WDT_LENGTH));
print("RGU STA: %x\n", DRV_Reg32(MTK_WDT_STATUS));
print("RGU INTERVAL: %x\n", DRV_Reg32(MTK_WDT_INTERVAL));
print("==== Dump RGU Reg End ====\n");
DRV_WriteReg32(0x10007000, 0x22000000); //mt6572 emulation
#else
unsigned wdt_sta;
/* Dump RGU regisers */
print("==== Dump RGU Reg ========\n");
print("RGU MODE: %x\n", DRV_Reg32(MTK_WDT_MODE));
print("RGU EN_FAST: %x\n", DRV_Reg32(MTK_WDT_EN_FAST));
print("RGU LENGTH: %x\n", DRV_Reg32(MTK_WDT_LENGTH));
print("RGU STA: %x\n", DRV_Reg32(MTK_WDT_STATUS));
print("RGU DRAM_CTL: %x\n", DRV_Reg32(MTK_WDT_DRAMC_CTL));
print("RGU INTERVAL: %x\n", DRV_Reg32(MTK_WDT_INTERVAL));
print("RGU FAST_SWSYSRST: %x\n", DRV_Reg32(MTK_WDT_FAST_SWSYSRST));
print("==== Dump RGU Reg End ====\n");
rgu_mode = DRV_Reg32(MTK_WDT_MODE);
wdt_sta = mtk_wdt_check_status(); // This function will store the reset reason: Time out/ SW trigger
if (((wdt_sta & MTK_WDT_STATUS_HWWDT_RST) || (wdt_sta & MTK_WDT_STATUS_PCMWDT_RST))
&& (rgu_mode&MTK_WDT_MODE_AUTO_RESTART))
{ /* For E1 bug, that SW reset value is 0xC000, we using "==" to check */
/* Time out reboot always by pass power key */
g_rgu_status = RE_BOOT_BY_WDT_HW;
}
else if (wdt_sta & MTK_WDT_STATUS_SWWDT_RST)
{
g_rgu_status = RE_BOOT_BY_WDT_SW;
}
else
{
g_rgu_status = RE_BOOT_REASON_UNKNOW;
}
if(wdt_sta & MTK_WDT_STATUS_IRQWDT_RST)
{
g_rgu_status |= RE_BOOT_WITH_INTTERUPT;
}
if(wdt_sta & MTK_WDT_STATUS_SPMWDT_RST)
{
g_rgu_status |= RE_BOOT_WITH_THERMAL;
}
if(wdt_sta & MTK_WDT_STATUS_PCMWDT_RST)
{
g_rgu_status |= RE_BOOT_BY_SPM;
}
print ("g_rgu_satus:%d\n", g_rgu_status);
mtk_wdt_mode_config(FALSE, FALSE, FALSE, FALSE, FALSE); // Wirte Mode register will clear status register
mtk_wdt_check_trig_reboot_reason();
/* Setting timeout 10s */
mtk_wdt_set_time_out_value(16);
#ifdef CFG_APWDT_DISABLE
/* Config HW reboot mode */
mtk_wdt_mode_config(TRUE, FALSE, TRUE, FALSE, TRUE);
mtk_wdt_restart();
#endif
mtk_wdt_reset_deglitch_enable();
#endif
}
int mtk_wdt_boot_check(void)
{
unsigned int wdt_sta = mtk_wdt_check_status();
#if 0
if (wdt_sta == MTK_WDT_STATUS_HWWDT_RST) { /* For E1 bug, that SW reset value is 0xC000, we using "==" to check */
/* Time out reboot always by pass power key */
print ("TO reset, need bypass power key\n");
return WDT_BY_PASS_PWK_REBOOT;
} else if (wdt_sta & MTK_WDT_STATUS_SWWDT_RST) {
#endif
/*
* For DA download hope to timeout reboot, and boot to u-boot/kernel configurable reason,
* we set both timeout reboot and software reboot can check whether bypass power key.
*/
if (wdt_sta & (MTK_WDT_STATUS_HWWDT_RST|MTK_WDT_STATUS_SWWDT_RST|
MTK_WDT_STATUS_SPM_THERMAL_RST|MTK_WDT_STATUS_SPMWDT_RST|
MTK_WDT_STATUS_THERMAL_DIRECT_RST|MTK_WDT_STATUS_SECURITY_RST
|MTK_WDT_STATUS_DEBUGWDT_RST)) {
if (rgu_mode & MTK_WDT_MODE_AUTO_RESTART) {
/* HW/SW reboot, and auto restart is set, means bypass power key */
print ("SW reset with bypass power key flag\n");
return WDT_BY_PASS_PWK_REBOOT;
} else {
print ("SW reset without bypass power key flag\n");
return WDT_NORMAL_REBOOT;
}
}
return WDT_NOT_WDT_REBOOT;
}
void mtk_wdt_init(void)
{
unsigned wdt_sta;
unsigned int wdt_dbg_ctrl;
unsigned int nonrst;
/* Dump RGU regisers */
print("==== Dump RGU Reg ========\n");
print("RGU MODE: %x\n", DRV_Reg32(MTK_WDT_MODE));
print("RGU LENGTH: %x\n", DRV_Reg32(MTK_WDT_LENGTH));
print("RGU STA: %x\n", DRV_Reg32(MTK_WDT_STATUS));
print("RGU INTERVAL: %x\n", DRV_Reg32(MTK_WDT_INTERVAL));
print("RGU SWSYSRST: %x\n", DRV_Reg32(MTK_WDT_SWSYSRST));
print("==== Dump RGU Reg End ====\n");
rgu_mode = DRV_Reg32(MTK_WDT_MODE);
wdt_sta = mtk_wdt_check_status(); // This function will store the reset reason: Time out/ SW trigger
if ((wdt_sta & MTK_WDT_STATUS_HWWDT_RST)&&(rgu_mode&MTK_WDT_MODE_AUTO_RESTART))
{ /* For E1 bug, that SW reset value is 0xC000, we using "==" to check */
/* Time out reboot always by pass power key */
g_rgu_status = RE_BOOT_BY_WDT_HW;
}
else if (wdt_sta & MTK_WDT_STATUS_SWWDT_RST)
{
g_rgu_status = RE_BOOT_BY_WDT_SW;
}
else
{
g_rgu_status = RE_BOOT_REASON_UNKNOW;
}
if(wdt_sta & MTK_WDT_STATUS_IRQWDT_RST)
{
g_rgu_status |= RE_BOOT_WITH_INTTERUPT;
}
if(wdt_sta & MTK_WDT_STATUS_SPM_THERMAL_RST)
{
g_rgu_status |= RE_BOOT_BY_SPM_THERMAL;
}
if(wdt_sta & MTK_WDT_STATUS_SPMWDT_RST)
{
g_rgu_status |= RE_BOOT_BY_SPM;
}
if(wdt_sta & MTK_WDT_STATUS_THERMAL_DIRECT_RST)
{
g_rgu_status |= RE_BOOT_BY_THERMAL_DIRECT;
}
if(wdt_sta & MTK_WDT_STATUS_DEBUGWDT_RST)
{
g_rgu_status |= RE_BOOT_BY_DEBUG;
}
if(wdt_sta & MTK_WDT_STATUS_SECURITY_RST)
{
g_rgu_status |= RE_BOOT_BY_SECURITY;
}
print ("RGU: g_rgu_satus:%d\n", g_rgu_status);
mtk_wdt_mode_config(FALSE, FALSE, FALSE, FALSE, FALSE); // Wirte Mode register will clear status register
mtk_wdt_check_trig_reboot_reason();
/* Setting timeout 10s */
mtk_wdt_set_time_out_value(16);
#if (!CFG_APWDT_DISABLE)
/* Config HW reboot mode */
mtk_wdt_mode_config(TRUE, TRUE, TRUE, FALSE, TRUE);
mtk_wdt_restart();
#endif
/*
* E3 ECO
* reset will delay 2ms after set SW_WDT in register
*/
nonrst = READ_REG(MTK_WDT_NONRST_REG);
nonrst = (nonrst | (1<<29));
WRITE_REG(nonrst, MTK_WDT_NONRST_REG);
print("WDT NONRST=0x%x\n", READ_REG(MTK_WDT_NONRST_REG));
// set mcu_lath_en requir by pl owner confirmed by RGU DE
/*SW workaround close DEBUG IRQ for C2K*/
nonrst = READ_REG(MTK_WDT_REQ_IRQ_EN);
nonrst &= (~(1<<19));
nonrst |= MTK_WDT_REQ_IRQ_KEY;
WRITE_REG(nonrst, MTK_WDT_REQ_IRQ_EN);
/*disable spm_thermal bit, becaue spm_thermal had been remove from HW*/
nonrst = READ_REG(MTK_WDT_REQ_IRQ_EN);
nonrst &= (~(1<<0)); /*disale spm_thermal irq*/
nonrst |= MTK_WDT_REQ_IRQ_KEY;
WRITE_REG(nonrst, MTK_WDT_REQ_IRQ_EN);
print("WDT IRQ_EN=0x%x\n", READ_REG(MTK_WDT_REQ_IRQ_EN));
nonrst = READ_REG(MTK_WDT_REQ_MODE);
nonrst &= (~(1<<0)); /*disale spm_thermal reset*/
nonrst |= 0x33000000;
WRITE_REG(nonrst, MTK_WDT_REQ_MODE);
print("WDT REQ_EN=0x%x\n", READ_REG(MTK_WDT_REQ_MODE));
wdt_dbg_ctrl = READ_REG(MTK_WDT_DEBUG_CTL);
wdt_dbg_ctrl |= MTK_RG_MCU_LATH_EN;
wdt_dbg_ctrl |= MTK_DEBUG_CTL_KEY;
WRITE_REG(wdt_dbg_ctrl, MTK_WDT_DEBUG_CTL);
print("RGU %s:MTK_WDT_DEBUG_CTL(%x)\n", __func__,wdt_dbg_ctrl);
}
