/* RP helper function to attach a device to an adaptor. */
void rp_device_attach(Object *adaptor, Object *dev,
int rp_nr, int dev_nr,
Error **errp)
{
Error *err = NULL;
uint32_t nr_devs;
char *name;
int i;
assert(adaptor);
assert(dev);
/* Verify that the adaptor is of Remote Port type. */
if (!object_dynamic_cast(adaptor, TYPE_REMOTE_PORT)) {
error_setg(errp, "%s is not a Remote-Port adaptor!\n",
object_get_canonical_path(adaptor));
return;
}
name = g_strdup_printf("rp-adaptor%d", rp_nr);
object_property_set_link(dev, adaptor, name, &err);
g_free(name);
if (err != NULL) {
error_propagate(errp, err);
return;
}
name = g_strdup_printf("rp-chan%d", rp_nr);
object_property_set_int(dev, dev_nr, name, &err);
g_free(name);
if (err != NULL
&& !object_dynamic_cast(dev, TYPE_REMOTE_PORT_DEVICE)) {
/*
* RP devices that only receive requests may not need to
* know their channel/dev number. If not, treat this as
* an error.
*/
error_propagate(errp, err);
return;
}
err = NULL;
nr_devs = object_property_get_int(dev, "nr-devs", &err);
if (err) {
nr_devs = 1;
err = NULL;
}
/* Multi-channel devs use consecutive numbering. */
for (i = 0; i < nr_devs; i++) {
name = g_strdup_printf("remote-port-dev%d", dev_nr + i);
object_property_set_link(adaptor, dev, name, &err);
g_free(name);
if (err != NULL) {
error_propagate(errp, err);
return;
}
}
}
static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size)
{
PL080State *dma = opaque;
int i = dma - &mms->dma[0];
SysBusDevice *s;
char *mscname = g_strdup_printf("%s-msc", name);
TZMSC *msc = &mms->msc[i];
DeviceState *iotkitdev = DEVICE(&mms->iotkit);
MemoryRegion *msc_upstream;
MemoryRegion *msc_downstream;
/*
* Each DMA device is a PL081 whose transaction master interface
* is guarded by a Master Security Controller. The downstream end of
* the MSC connects to the IoTKit AHB Slave Expansion port, so the
* DMA devices can see all devices and memory that the CPU does.
*/
sysbus_init_child_obj(OBJECT(mms), mscname, msc, sizeof(*msc), TYPE_TZ_MSC);
msc_downstream = sysbus_mmio_get_region(SYS_BUS_DEVICE(&mms->iotkit), 0);
object_property_set_link(OBJECT(msc), OBJECT(msc_downstream),
"downstream", &error_fatal);
object_property_set_link(OBJECT(msc), OBJECT(mms),
"idau", &error_fatal);
object_property_set_bool(OBJECT(msc), true, "realized", &error_fatal);
qdev_connect_gpio_out_named(DEVICE(msc), "irq", 0,
qdev_get_gpio_in_named(iotkitdev,
"mscexp_status", i));
qdev_connect_gpio_out_named(iotkitdev, "mscexp_clear", i,
qdev_get_gpio_in_named(DEVICE(msc),
"irq_clear", 0));
qdev_connect_gpio_out_named(iotkitdev, "mscexp_ns", i,
qdev_get_gpio_in_named(DEVICE(msc),
"cfg_nonsec", 0));
qdev_connect_gpio_out(DEVICE(&mms->sec_resp_splitter),
ARRAY_SIZE(mms->ppc) + i,
qdev_get_gpio_in_named(DEVICE(msc),
"cfg_sec_resp", 0));
msc_upstream = sysbus_mmio_get_region(SYS_BUS_DEVICE(msc), 0);
sysbus_init_child_obj(OBJECT(mms), name, dma, sizeof(*dma), TYPE_PL081);
object_property_set_link(OBJECT(dma), OBJECT(msc_upstream),
"downstream", &error_fatal);
object_property_set_bool(OBJECT(dma), true, "realized", &error_fatal);
s = SYS_BUS_DEVICE(dma);
/* Wire up DMACINTR, DMACINTERR, DMACINTTC */
sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 58 + i * 3));
sysbus_connect_irq(s, 1, get_sse_irq_in(mms, 56 + i * 3));
sysbus_connect_irq(s, 2, get_sse_irq_in(mms, 57 + i * 3));
g_free(mscname);
return sysbus_mmio_get_region(s, 0);
}
static void virtio_gpu_pci_base_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
{
VirtIOGPUPCIBase *vgpu = VIRTIO_GPU_PCI_BASE(vpci_dev);
VirtIOGPUBase *g = vgpu->vgpu;
DeviceState *vdev = DEVICE(g);
int i;
Error *local_error = NULL;
qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
if (!virtio_pci_force_virtio_1(vpci_dev, errp)) {
return;
}
object_property_set_bool(OBJECT(vdev), true, "realized", &local_error);
if (local_error) {
error_propagate(errp, local_error);
return;
}
for (i = 0; i < g->conf.max_outputs; i++) {
object_property_set_link(OBJECT(g->scanout[i].con),
OBJECT(vpci_dev),
"device", errp);
}
}
static void microbit_init(MachineState *machine)
{
MicrobitMachineState *s = MICROBIT_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *mr;
Object *soc = OBJECT(&s->nrf51);
Object *i2c = OBJECT(&s->i2c);
sysbus_init_child_obj(OBJECT(machine), "nrf51", soc, sizeof(s->nrf51),
TYPE_NRF51_SOC);
qdev_prop_set_chr(DEVICE(&s->nrf51), "serial0", serial_hd(0));
object_property_set_link(soc, OBJECT(system_memory), "memory",
&error_fatal);
object_property_set_bool(soc, true, "realized", &error_fatal);
/*
* Overlap the TWI stub device into the SoC. This is a microbit-specific
* hack until we implement the nRF51 TWI controller properly and the
* magnetometer/accelerometer devices.
*/
sysbus_init_child_obj(OBJECT(machine), "microbit.twi", i2c,
sizeof(s->i2c), TYPE_MICROBIT_I2C);
object_property_set_bool(i2c, true, "realized", &error_fatal);
mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(i2c), 0);
memory_region_add_subregion_overlap(&s->nrf51.container, NRF51_TWI_BASE,
mr, -1);
armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
NRF51_SOC(soc)->flash_size);
}
/* VGA device wrapper around PCI device around virtio GPU */
static void virtio_vga_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
{
VirtIOVGA *vvga = VIRTIO_VGA(vpci_dev);
VirtIOGPU *g = &vvga->vdev;
VGACommonState *vga = &vvga->vga;
Error *err = NULL;
uint32_t offset;
int i;
/* init vga compat bits */
vga->vram_size_mb = 8;
vga_common_init(vga, OBJECT(vpci_dev), false);
vga_init(vga, OBJECT(vpci_dev), pci_address_space(&vpci_dev->pci_dev),
pci_address_space_io(&vpci_dev->pci_dev), true);
pci_register_bar(&vpci_dev->pci_dev, 0,
PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram);
/*
* Configure virtio bar and regions
*
* We use bar #2 for the mmio regions, to be compatible with stdvga.
* virtio regions are moved to the end of bar #2, to make room for
* the stdvga mmio registers at the start of bar #2.
*/
vpci_dev->modern_mem_bar = 2;
vpci_dev->msix_bar = 4;
offset = memory_region_size(&vpci_dev->modern_bar);
offset -= vpci_dev->notify.size;
vpci_dev->notify.offset = offset;
offset -= vpci_dev->device.size;
vpci_dev->device.offset = offset;
offset -= vpci_dev->isr.size;
vpci_dev->isr.offset = offset;
offset -= vpci_dev->common.size;
vpci_dev->common.offset = offset;
/* init virtio bits */
qdev_set_parent_bus(DEVICE(g), BUS(&vpci_dev->bus));
/* force virtio-1.0 */
vpci_dev->flags &= ~VIRTIO_PCI_FLAG_DISABLE_MODERN;
vpci_dev->flags |= VIRTIO_PCI_FLAG_DISABLE_LEGACY;
object_property_set_bool(OBJECT(g), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
/* add stdvga mmio regions */
pci_std_vga_mmio_region_init(vga, &vpci_dev->modern_bar,
vvga->vga_mrs, true);
vga->con = g->scanout[0].con;
graphic_console_set_hwops(vga->con, &virtio_vga_ops, vvga);
for (i = 0; i < g->conf.max_outputs; i++) {
object_property_set_link(OBJECT(g->scanout[i].con),
OBJECT(vpci_dev),
"device", errp);
}
}
static void pmc_sss_realize(DeviceState *dev, Error **errp)
{
PMCSSS *s = PMC_SSS(dev);
SSSBase *p = SSS_BASE(dev);
Error *local_errp = NULL;
int r, i;
for (i = 0; i < R_MAX; ++i) {
DepRegisterInfo *r = &s->regs_info[i];
*r = (DepRegisterInfo) {
.data = (uint8_t *)&s->regs[i],
.data_size = sizeof(uint32_t),
.access = &pmc_sss_regs_info[i],
.debug = PMC_SSS_ERR_DEBUG,
.prefix = object_get_canonical_path(OBJECT(dev)),
.opaque = s,
};
memory_region_init_io(&r->mem, OBJECT(dev), &sss_ops, r,
"sss-regs", 4);
memory_region_add_subregion(&s->iomem, i * 4, &r->mem);
}
for (r = 0; r < NO_REMOTE; ++r) {
SSSStream *ss = SSS_STREAM(&p->rx_devs[r]);
object_property_add_link(OBJECT(ss), "sss", TYPE_PMC_SSS,
(Object **)&ss->sss,
qdev_prop_allow_set_link_before_realize,
OBJ_PROP_LINK_UNREF_ON_RELEASE,
&local_errp);
if (local_errp) {
goto pmc_sss_realize_fail;
}
object_property_set_link(OBJECT(ss), OBJECT(s), "sss", &local_errp);
if (local_errp) {
goto pmc_sss_realize_fail;
}
}
return;
pmc_sss_realize_fail:
if (!*errp) {
*errp = local_errp;
}
}
static void sss_reset(DeviceState *dev)
{
PMCSSS *s = PMC_SSS(dev);
SSSBase *p = SSS_BASE(dev);
int i;
for (i = 0; i < R_MAX; ++i) {
dep_register_reset(&s->regs_info[i]);
}
sss_notify_all(p);
}
static void virtio_rng_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIORNG *vrng = VIRTIO_RNG(dev);
Error *local_err = NULL;
if (vrng->conf.period_ms <= 0) {
error_setg(errp, "'period' parameter expects a positive integer");
return;
}
/* Workaround: Property parsing does not enforce unsigned integers,
* So this is a hack to reject such numbers. */
if (vrng->conf.max_bytes > INT64_MAX) {
error_setg(errp, "'max-bytes' parameter must be non-negative, "
"and less than 2^63");
return;
}
if (vrng->conf.rng == NULL) {
vrng->conf.default_backend = RNG_RANDOM(object_new(TYPE_RNG_RANDOM));
user_creatable_complete(OBJECT(vrng->conf.default_backend),
&local_err);
if (local_err) {
error_propagate(errp, local_err);
object_unref(OBJECT(vrng->conf.default_backend));
return;
}
object_property_add_child(OBJECT(dev),
"default-backend",
OBJECT(vrng->conf.default_backend),
NULL);
/* The child property took a reference, we can safely drop ours now */
object_unref(OBJECT(vrng->conf.default_backend));
object_property_set_link(OBJECT(dev),
OBJECT(vrng->conf.default_backend),
"rng", NULL);
}
vrng->rng = vrng->conf.rng;
if (vrng->rng == NULL) {
error_setg(errp, "'rng' parameter expects a valid object");
return;
}
virtio_init(vdev, "virtio-rng", VIRTIO_ID_RNG, 0);
vrng->vq = virtio_add_queue(vdev, 8, handle_input);
vrng->quota_remaining = vrng->conf.max_bytes;
vrng->rate_limit_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
check_rate_limit, vrng);
vrng->activate_timer = true;
register_savevm(dev, "virtio-rng", -1, 1, virtio_rng_save,
virtio_rng_load, vrng);
}
static void s390_cpu_plug(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
gchar *name;
S390CPU *cpu = S390_CPU(dev);
CPUState *cs = CPU(dev);
name = g_strdup_printf("cpu[%i]", cpu->env.cpu_num);
object_property_set_link(OBJECT(hotplug_dev), OBJECT(cs), name,
errp);
g_free(name);
}
static void macio_realize_ide(MacIOState *s, MACIOIDEState *ide,
qemu_irq irq0, qemu_irq irq1, int dmaid,
Error **errp)
{
SysBusDevice *sysbus_dev;
sysbus_dev = SYS_BUS_DEVICE(ide);
sysbus_connect_irq(sysbus_dev, 0, irq0);
sysbus_connect_irq(sysbus_dev, 1, irq1);
qdev_prop_set_uint32(DEVICE(ide), "channel", dmaid);
object_property_set_link(OBJECT(ide), OBJECT(&s->dbdma), "dbdma", errp);
macio_ide_register_dma(ide);
object_property_set_bool(OBJECT(ide), true, "realized", errp);
}
static int virtio_ccw_rng_init(VirtioCcwDevice *ccw_dev)
{
VirtIORNGCcw *dev = VIRTIO_RNG_CCW(ccw_dev);
DeviceState *vdev = DEVICE(&dev->vdev);
qdev_set_parent_bus(vdev, BUS(&ccw_dev->bus));
if (qdev_init(vdev) < 0) {
return -1;
}
object_property_set_link(OBJECT(dev),
OBJECT(dev->vdev.conf.rng), "rng",
NULL);
return virtio_ccw_device_init(ccw_dev, VIRTIO_DEVICE(vdev));
}
static int virtio_ccw_rng_init(VirtioCcwDevice *dev)
{
VirtIODevice *vdev;
if (dev->rng.rng == NULL) {
dev->rng.default_backend = RNG_RANDOM(object_new(TYPE_RNG_RANDOM));
object_property_add_child(OBJECT(dev), "default-backend",
OBJECT(dev->rng.default_backend), NULL);
object_property_set_link(OBJECT(dev), OBJECT(dev->rng.default_backend),
"rng", NULL);
}
vdev = virtio_rng_init((DeviceState *)dev, &dev->rng);
if (!vdev) {
return -1;
}
return virtio_ccw_device_init(dev, vdev);
}
static void virtio_gpu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
{
VirtIOGPUPCI *vgpu = VIRTIO_GPU_PCI(vpci_dev);
VirtIOGPU *g = &vgpu->vdev;
DeviceState *vdev = DEVICE(&vgpu->vdev);
int i;
qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
virtio_pci_force_virtio_1(vpci_dev);
object_property_set_bool(OBJECT(vdev), true, "realized", errp);
for (i = 0; i < g->conf.max_outputs; i++) {
object_property_set_link(OBJECT(g->scanout[i].con),
OBJECT(vpci_dev),
"device", errp);
}
}
static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
{
NRF51State *s = NRF51_SOC(dev_soc);
Error *err = NULL;
if (!s->board_memory) {
error_setg(errp, "memory property was not set");
return;
}
object_property_set_link(OBJECT(&s->cpu), OBJECT(&s->container), "memory",
&err);
if (err) {
error_propagate(errp, err);
return;
}
object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1);
memory_region_init_rom(&s->flash, OBJECT(s), "nrf51.flash", s->flash_size,
&err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, FLASH_BASE, &s->flash);
memory_region_init_ram(&s->sram, NULL, "nrf51.sram", s->sram_size, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, SRAM_BASE, &s->sram);
create_unimplemented_device("nrf51_soc.io", IOMEM_BASE, IOMEM_SIZE);
create_unimplemented_device("nrf51_soc.ficr", FICR_BASE, FICR_SIZE);
create_unimplemented_device("nrf51_soc.private",
PRIVATE_BASE, PRIVATE_SIZE);
}
static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size)
{
TZMPC *mpc = opaque;
int i = mpc - &mms->ssram_mpc[0];
MemoryRegion *ssram = &mms->ssram[i];
MemoryRegion *upstream;
char *mpcname = g_strdup_printf("%s-mpc", name);
static uint32_t ramsize[] = { 0x00400000, 0x00200000, 0x00200000 };
static uint32_t rambase[] = { 0x00000000, 0x28000000, 0x28200000 };
memory_region_init_ram(ssram, NULL, name, ramsize[i], &error_fatal);
sysbus_init_child_obj(OBJECT(mms), mpcname, mpc, sizeof(mms->ssram_mpc[0]),
TYPE_TZ_MPC);
object_property_set_link(OBJECT(mpc), OBJECT(ssram),
"downstream", &error_fatal);
object_property_set_bool(OBJECT(mpc), true, "realized", &error_fatal);
/* Map the upstream end of the MPC into system memory */
upstream = sysbus_mmio_get_region(SYS_BUS_DEVICE(mpc), 1);
memory_region_add_subregion(get_system_memory(), rambase[i], upstream);
/* and connect its interrupt to the IoTKit */
qdev_connect_gpio_out_named(DEVICE(mpc), "irq", 0,
qdev_get_gpio_in_named(DEVICE(&mms->iotkit),
"mpcexp_status", i));
/* The first SSRAM is a special case as it has an alias; accesses to
* the alias region at 0x00400000 must also go to the MPC upstream.
*/
if (i == 0) {
make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", upstream, 0x00400000);
}
g_free(mpcname);
/* Return the register interface MR for our caller to map behind the PPC */
return sysbus_mmio_get_region(SYS_BUS_DEVICE(mpc), 0);
}
/* PC hardware initialisation */
static void pc_q35_init(MachineState *machine)
{
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
Q35PCIHost *q35_host;
PCIHostState *phb;
PCIBus *host_bus;
PCIDevice *lpc;
DeviceState *lpc_dev;
BusState *idebus[MAX_SATA_PORTS];
ISADevice *rtc_state;
MemoryRegion *system_io = get_system_io();
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
MemoryRegion *ram_memory;
GSIState *gsi_state;
ISABus *isa_bus;
qemu_irq *i8259;
int i;
ICH9LPCState *ich9_lpc;
PCIDevice *ahci;
ram_addr_t lowmem;
DriveInfo *hd[MAX_SATA_PORTS];
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory
* and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
* also known as MMCFG).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
*/
if (machine->ram_size >= 0xb0000000) {
lowmem = 0x80000000;
} else {
lowmem = 0xb0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (!pcms->max_ram_below_4g) {
pcms->max_ram_below_4g = 1ULL << 32; /* default: 4G */;
}
if (lowmem > pcms->max_ram_below_4g) {
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pcms->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
if (xen_enabled()) {
xen_hvm_init(pcms, &ram_memory);
}
pc_cpus_init(pcms);
kvmclock_create();
/* pci enabled */
if (pcmc->pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = get_system_memory();
}
pc_guest_info_init(pcms);
if (pcmc->smbios_defaults) {
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (Q35 + ICH9, 2009)",
mc->name, pcmc->smbios_legacy_mode,
pcmc->smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, get_system_memory(),
rom_memory, &ram_memory);
}
/* irq lines */
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pcmc->pci_enabled);
pcms->gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
pcms->gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
/* create pci host bus */
q35_host = Q35_HOST_DEVICE(qdev_create(NULL, TYPE_Q35_HOST_DEVICE));
object_property_add_child(qdev_get_machine(), "q35", OBJECT(q35_host), NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(ram_memory),
MCH_HOST_PROP_RAM_MEM, NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(pci_memory),
MCH_HOST_PROP_PCI_MEM, NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(get_system_memory()),
MCH_HOST_PROP_SYSTEM_MEM, NULL);
object_property_set_link(OBJECT(q35_host), OBJECT(system_io),
MCH_HOST_PROP_IO_MEM, NULL);
object_property_set_int(OBJECT(q35_host), pcms->below_4g_mem_size,
PCI_HOST_BELOW_4G_MEM_SIZE, NULL);
object_property_set_int(OBJECT(q35_host), pcms->above_4g_mem_size,
PCI_HOST_ABOVE_4G_MEM_SIZE, NULL);
/* pci */
qdev_init_nofail(DEVICE(q35_host));
phb = PCI_HOST_BRIDGE(q35_host);
host_bus = phb->bus;
/* create ISA bus */
lpc = pci_create_simple_multifunction(host_bus, PCI_DEVFN(ICH9_LPC_DEV,
ICH9_LPC_FUNC), true,
TYPE_ICH9_LPC_DEVICE);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(lpc),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
ich9_lpc = ICH9_LPC_DEVICE(lpc);
lpc_dev = DEVICE(lpc);
for (i = 0; i < GSI_NUM_PINS; i++) {
qdev_connect_gpio_out_named(lpc_dev, ICH9_GPIO_GSI, i, pcms->gsi[i]);
}
pci_bus_irqs(host_bus, ich9_lpc_set_irq, ich9_lpc_map_irq, ich9_lpc,
ICH9_LPC_NB_PIRQS);
pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
isa_bus = ich9_lpc->isa_bus;
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pcmc->pci_enabled) {
ioapic_init_gsi(gsi_state, "q35");
}
pc_register_ferr_irq(pcms->gsi[13]);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, pcms->gsi, &rtc_state, !mc->no_floppy,
(pcms->vmport != ON_OFF_AUTO_ON), 0xff0104);
/* connect pm stuff to lpc */
ich9_lpc_pm_init(lpc, pc_machine_is_smm_enabled(pcms));
/* ahci and SATA device, for q35 1 ahci controller is built-in */
ahci = pci_create_simple_multifunction(host_bus,
PCI_DEVFN(ICH9_SATA1_DEV,
ICH9_SATA1_FUNC),
true, "ich9-ahci");
idebus[0] = qdev_get_child_bus(&ahci->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&ahci->qdev, "ide.1");
g_assert(MAX_SATA_PORTS == ICH_AHCI(ahci)->ahci.ports);
ide_drive_get(hd, ICH_AHCI(ahci)->ahci.ports);
ahci_ide_create_devs(ahci, hd);
if (machine_usb(machine)) {
/* Should we create 6 UHCI according to ich9 spec? */
ehci_create_ich9_with_companions(host_bus, 0x1d);
}
/* TODO: Populate SPD eeprom data. */
smbus_eeprom_init(ich9_smb_init(host_bus,
PCI_DEVFN(ICH9_SMB_DEV, ICH9_SMB_FUNC),
0xb100),
8, NULL, 0);
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
/* the rest devices to which pci devfn is automatically assigned */
pc_vga_init(isa_bus, host_bus);
pc_nic_init(isa_bus, host_bus);
if (pcmc->pci_enabled) {
pc_pci_device_init(host_bus);
}
if (pcms->acpi_nvdimm_state.is_enabled) {
nvdimm_init_acpi_state(&pcms->acpi_nvdimm_state, system_io,
pcms->fw_cfg, OBJECT(pcms));
}
}
/* PC hardware initialisation */
static void pc_q35_init(MachineState *machine)
{
PCMachineState *pc_machine = PC_MACHINE(machine);
ram_addr_t below_4g_mem_size, above_4g_mem_size;
Q35PCIHost *q35_host;
PCIHostState *phb;
PCIBus *host_bus;
PCIDevice *lpc;
BusState *idebus[MAX_SATA_PORTS];
ISADevice *rtc_state;
ISADevice *floppy;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
MemoryRegion *ram_memory;
GSIState *gsi_state;
ISABus *isa_bus;
int pci_enabled = 1;
qemu_irq *cpu_irq;
qemu_irq *gsi;
qemu_irq *i8259;
int i;
ICH9LPCState *ich9_lpc;
PCIDevice *ahci;
DeviceState *icc_bridge;
PcGuestInfo *guest_info;
ram_addr_t lowmem;
DriveInfo *hd[MAX_SATA_PORTS];
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory
* and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
* also known as MMCFG).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
* For old machine types, use whatever split we used historically to avoid
* breaking migration.
*/
if (machine->ram_size >= 0xb0000000) {
lowmem = gigabyte_align ? 0x80000000 : 0xb0000000;
} else {
lowmem = 0xb0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pc_machine->max_ram_below_4g) {
lowmem = pc_machine->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pc_machine->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
above_4g_mem_size = machine->ram_size - lowmem;
below_4g_mem_size = lowmem;
} else {
above_4g_mem_size = 0;
below_4g_mem_size = machine->ram_size;
}
if (xen_enabled() && xen_hvm_init(&below_4g_mem_size, &above_4g_mem_size,
&ram_memory) != 0) {
fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
exit(1);
}
icc_bridge = qdev_create(NULL, TYPE_ICC_BRIDGE);
object_property_add_child(qdev_get_machine(), "icc-bridge",
OBJECT(icc_bridge), NULL);
pc_cpus_init(machine->cpu_model, icc_bridge);
pc_acpi_init("q35-acpi-dsdt.aml");
kvmclock_create();
/* pci enabled */
if (pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = get_system_memory();
}
guest_info = pc_guest_info_init(below_4g_mem_size, above_4g_mem_size);
guest_info->isapc_ram_fw = false;
guest_info->has_acpi_build = has_acpi_build;
guest_info->has_reserved_memory = has_reserved_memory;
guest_info->rsdp_in_ram = rsdp_in_ram;
/* Migration was not supported in 2.0 for Q35, so do not bother
* with this hack (see hw/i386/acpi-build.c).
*/
guest_info->legacy_acpi_table_size = 0;
if (smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (Q35 + ICH9, 2009)",
mc->name, smbios_legacy_mode, smbios_uuid_encoded);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(machine, get_system_memory(),
below_4g_mem_size, above_4g_mem_size,
rom_memory, &ram_memory, guest_info);
}
/* irq lines */
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_irqchip_in_kernel()) {
kvm_pc_setup_irq_routing(pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
/* create pci host bus */
q35_host = Q35_HOST_DEVICE(qdev_create(NULL, TYPE_Q35_HOST_DEVICE));
object_property_add_child(qdev_get_machine(), "q35", OBJECT(q35_host), NULL);
q35_host->mch.ram_memory = ram_memory;
q35_host->mch.pci_address_space = pci_memory;
q35_host->mch.system_memory = get_system_memory();
q35_host->mch.address_space_io = get_system_io();
q35_host->mch.below_4g_mem_size = below_4g_mem_size;
q35_host->mch.above_4g_mem_size = above_4g_mem_size;
q35_host->mch.guest_info = guest_info;
/* pci */
qdev_init_nofail(DEVICE(q35_host));
phb = PCI_HOST_BRIDGE(q35_host);
host_bus = phb->bus;
/* create ISA bus */
lpc = pci_create_simple_multifunction(host_bus, PCI_DEVFN(ICH9_LPC_DEV,
ICH9_LPC_FUNC), true,
TYPE_ICH9_LPC_DEVICE);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pc_machine->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(lpc),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
ich9_lpc = ICH9_LPC_DEVICE(lpc);
ich9_lpc->pic = gsi;
ich9_lpc->ioapic = gsi_state->ioapic_irq;
pci_bus_irqs(host_bus, ich9_lpc_set_irq, ich9_lpc_map_irq, ich9_lpc,
ICH9_LPC_NB_PIRQS);
pci_bus_set_route_irq_fn(host_bus, ich9_route_intx_pin_to_irq);
isa_bus = ich9_lpc->isa_bus;
/*end early*/
isa_bus_irqs(isa_bus, gsi);
if (kvm_irqchip_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
cpu_irq = pc_allocate_cpu_irq();
i8259 = i8259_init(isa_bus, cpu_irq[0]);
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
if (pci_enabled) {
ioapic_init_gsi(gsi_state, "q35");
}
qdev_init_nofail(icc_bridge);
pc_register_ferr_irq(gsi[13]);
assert(pc_machine->vmport != ON_OFF_AUTO_MAX);
if (pc_machine->vmport == ON_OFF_AUTO_AUTO) {
pc_machine->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, &floppy,
(pc_machine->vmport != ON_OFF_AUTO_ON), 0xff0104);
/* connect pm stuff to lpc */
ich9_lpc_pm_init(lpc);
/* ahci and SATA device, for q35 1 ahci controller is built-in */
ahci = pci_create_simple_multifunction(host_bus,
PCI_DEVFN(ICH9_SATA1_DEV,
ICH9_SATA1_FUNC),
true, "ich9-ahci");
idebus[0] = qdev_get_child_bus(&ahci->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&ahci->qdev, "ide.1");
g_assert(MAX_SATA_PORTS == ICH_AHCI(ahci)->ahci.ports);
ide_drive_get(hd, ICH_AHCI(ahci)->ahci.ports);
ahci_ide_create_devs(ahci, hd);
if (usb_enabled()) {
/* Should we create 6 UHCI according to ich9 spec? */
ehci_create_ich9_with_companions(host_bus, 0x1d);
}
/* TODO: Populate SPD eeprom data. */
smbus_eeprom_init(ich9_smb_init(host_bus,
PCI_DEVFN(ICH9_SMB_DEV, ICH9_SMB_FUNC),
0xb100),
8, NULL, 0);
pc_cmos_init(below_4g_mem_size, above_4g_mem_size, machine->boot_order,
machine, floppy, idebus[0], idebus[1], rtc_state);
/* the rest devices to which pci devfn is automatically assigned */
pc_vga_init(isa_bus, host_bus);
pc_nic_init(isa_bus, host_bus);
if (pci_enabled) {
pc_pci_device_init(host_bus);
}
}
static void sun4uv_init(MemoryRegion *address_space_mem,
MachineState *machine,
const struct hwdef *hwdef)
{
SPARCCPU *cpu;
Nvram *nvram;
unsigned int i;
uint64_t initrd_addr, initrd_size, kernel_addr, kernel_size, kernel_entry;
SabreState *sabre;
PCIBus *pci_bus, *pci_busA, *pci_busB;
PCIDevice *ebus, *pci_dev;
SysBusDevice *s;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
DeviceState *iommu, *dev;
FWCfgState *fw_cfg;
NICInfo *nd;
MACAddr macaddr;
bool onboard_nic;
/* init CPUs */
cpu = sparc64_cpu_devinit(machine->cpu_type, hwdef->prom_addr);
/* IOMMU */
iommu = qdev_create(NULL, TYPE_SUN4U_IOMMU);
qdev_init_nofail(iommu);
/* set up devices */
ram_init(0, machine->ram_size);
prom_init(hwdef->prom_addr, bios_name);
/* Init sabre (PCI host bridge) */
sabre = SABRE_DEVICE(qdev_create(NULL, TYPE_SABRE));
qdev_prop_set_uint64(DEVICE(sabre), "special-base", PBM_SPECIAL_BASE);
qdev_prop_set_uint64(DEVICE(sabre), "mem-base", PBM_MEM_BASE);
object_property_set_link(OBJECT(sabre), OBJECT(iommu), "iommu",
&error_abort);
qdev_init_nofail(DEVICE(sabre));
/* Wire up PCI interrupts to CPU */
for (i = 0; i < IVEC_MAX; i++) {
qdev_connect_gpio_out_named(DEVICE(sabre), "ivec-irq", i,
qdev_get_gpio_in_named(DEVICE(cpu), "ivec-irq", i));
}
pci_bus = PCI_HOST_BRIDGE(sabre)->bus;
pci_busA = pci_bridge_get_sec_bus(sabre->bridgeA);
pci_busB = pci_bridge_get_sec_bus(sabre->bridgeB);
/* Only in-built Simba APBs can exist on the root bus, slot 0 on busA is
reserved (leaving no slots free after on-board devices) however slots
0-3 are free on busB */
pci_bus->slot_reserved_mask = 0xfffffffc;
pci_busA->slot_reserved_mask = 0xfffffff1;
pci_busB->slot_reserved_mask = 0xfffffff0;
ebus = pci_create_multifunction(pci_busA, PCI_DEVFN(1, 0), true, TYPE_EBUS);
qdev_prop_set_uint64(DEVICE(ebus), "console-serial-base",
hwdef->console_serial_base);
qdev_init_nofail(DEVICE(ebus));
/* Wire up "well-known" ISA IRQs to PBM legacy obio IRQs */
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 7,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_LPT_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 6,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_FDD_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 1,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_KBD_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 12,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_MSE_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 4,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_SER_IRQ));
pci_dev = pci_create_simple(pci_busA, PCI_DEVFN(2, 0), "VGA");
memset(&macaddr, 0, sizeof(MACAddr));
onboard_nic = false;
for (i = 0; i < nb_nics; i++) {
nd = &nd_table[i];
if (!nd->model || strcmp(nd->model, "sunhme") == 0) {
if (!onboard_nic) {
pci_dev = pci_create_multifunction(pci_busA, PCI_DEVFN(1, 1),
true, "sunhme");
memcpy(&macaddr, &nd->macaddr.a, sizeof(MACAddr));
onboard_nic = true;
} else {
pci_dev = pci_create(pci_busB, -1, "sunhme");
}
} else {
pci_dev = pci_create(pci_busB, -1, nd->model);
}
dev = &pci_dev->qdev;
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
/* If we don't have an onboard NIC, grab a default MAC address so that
* we have a valid machine id */
if (!onboard_nic) {
qemu_macaddr_default_if_unset(&macaddr);
}
ide_drive_get(hd, ARRAY_SIZE(hd));
pci_dev = pci_create(pci_busA, PCI_DEVFN(3, 0), "cmd646-ide");
qdev_prop_set_uint32(&pci_dev->qdev, "secondary", 1);
qdev_init_nofail(&pci_dev->qdev);
pci_ide_create_devs(pci_dev, hd);
/* Map NVRAM into I/O (ebus) space */
nvram = m48t59_init(NULL, 0, 0, NVRAM_SIZE, 1968, 59);
s = SYS_BUS_DEVICE(nvram);
memory_region_add_subregion(pci_address_space_io(ebus), 0x2000,
sysbus_mmio_get_region(s, 0));
initrd_size = 0;
initrd_addr = 0;
kernel_size = sun4u_load_kernel(machine->kernel_filename,
machine->initrd_filename,
ram_size, &initrd_size, &initrd_addr,
&kernel_addr, &kernel_entry);
sun4u_NVRAM_set_params(nvram, NVRAM_SIZE, "Sun4u", machine->ram_size,
machine->boot_order,
kernel_addr, kernel_size,
machine->kernel_cmdline,
initrd_addr, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth,
(uint8_t *)&macaddr);
dev = qdev_create(NULL, TYPE_FW_CFG_IO);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(ebus), TYPE_FW_CFG, OBJECT(dev), NULL);
qdev_init_nofail(dev);
memory_region_add_subregion(pci_address_space_io(ebus), BIOS_CFG_IOPORT,
&FW_CFG_IO(dev)->comb_iomem);
fw_cfg = FW_CFG(dev);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_entry);
fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_DEPTH, graphic_depth);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
static int fdt_init_qdev(char *node_path, FDTMachineInfo *fdti, char *compat)
{
int err;
qemu_irq irq;
hwaddr base;
int offset;
DeviceState *dev;
char *dev_type = NULL;
int is_intc;
int i;
dev = fdt_create_qdev_from_compat(compat, &dev_type);
if (!dev) {
DB_PRINT("no match found for %s\n", compat);
return 1;
}
/* FIXME: attach to the sysbus instead */
object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
qemu_fdt_get_node_name(fdti->fdt, node_path),
OBJECT(dev), NULL);
fdt_init_set_opaque(fdti, node_path, dev);
/* connect nic if appropriate */
static int nics;
if (object_property_find(OBJECT(dev), "mac", NULL)) {
qdev_set_nic_properties(dev, &nd_table[nics]);
if (nd_table[nics].instantiated) {
DB_PRINT("NIC instantiated: %s\n", dev_type);
nics++;
}
}
offset = fdt_path_offset(fdti->fdt, node_path);
for (offset = fdt_first_property_offset(fdti->fdt, offset);
offset != -FDT_ERR_NOTFOUND;
offset = fdt_next_property_offset(fdti->fdt, offset)) {
const char *propname;
int len;
const void *val = fdt_getprop_by_offset(fdti->fdt, offset,
&propname, &len);
propname = trim_vendor(propname);
ObjectProperty *p = object_property_find(OBJECT(dev), propname, NULL);
if (p) {
DB_PRINT("matched property: %s of type %s, len %d\n",
propname, p->type, len);
}
if (!p) {
continue;
}
/* FIXME: handle generically using accessors and stuff */
if (!strcmp(p->type, "uint8") || !strcmp(p->type, "uint16") ||
!strcmp(p->type, "uint32") || !strcmp(p->type, "uint64")) {
uint64_t offset = (!strcmp(propname, "reg")) ?
fdt_get_parent_base(node_path, fdti) : 0;
object_property_set_int(OBJECT(dev), get_int_be(val, len) + offset,
propname, &error_abort);
DB_PRINT("set property %s to %#llx\n", propname,
(long long unsigned int)get_int_be(val, len));
} else if (!strcmp(p->type, "bool")) {
object_property_set_bool(OBJECT(dev), !!get_int_be(val, len),
propname, &error_abort);
DB_PRINT("set property %s to %#llx\n", propname,
(long long unsigned int)get_int_be(val, len));
} else if (!strncmp(p->type, "link", 4)) {
char target_node_path[DT_PATH_LENGTH];
DeviceState *linked_dev;
if (qemu_fdt_get_node_by_phandle(fdti->fdt, target_node_path,
get_int_be(val, len))) {
abort();
}
while (!fdt_init_has_opaque(fdti, target_node_path)) {
fdt_init_yield(fdti);
}
linked_dev = fdt_init_get_opaque(fdti, target_node_path);
object_property_set_link(OBJECT(dev), OBJECT(linked_dev), propname,
&error_abort);
} else if (!strcmp(p->type, "string")) {
object_property_set_str(OBJECT(dev), strndup(val, len), propname, &error_abort);
}
}
qdev_init_nofail(dev);
/* map slave attachment */
base = qemu_fdt_getprop_cell(fdti->fdt, node_path, "reg", 0, false, &error_abort);
base += fdt_get_parent_base(node_path, fdti);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
{
int len;
fdt_get_property(fdti->fdt, fdt_path_offset(fdti->fdt, node_path),
"interrupt-controller", &len);
is_intc = len >= 0;
DB_PRINT("is interrupt controller: %c\n", is_intc ? 'y' : 'n');
}
/* connect irq */
for (i = 0; ; ++i) {
char irq_info[1024];
irq = fdt_get_irq_info(fdti, node_path, i, &err, irq_info);
/* INTCs inferr their top level, if no IRQ connection specified */
if (err && is_intc) {
irq = fdti->irq_base;
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
fprintf(stderr, "FDT: (%s) connected top level irq %s\n", dev_type,
irq_info);
break;
}
if (!err) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
fprintf(stderr, "FDT: (%s) connected irq %s\n", dev_type, irq_info);
} else {
break;
}
}
if (dev_type) {
g_free(dev_type);
}
return 0;
}
static void mips_cps_realize(DeviceState *dev, Error **errp)
{
MIPSCPSState *s = MIPS_CPS(dev);
CPUMIPSState *env;
MIPSCPU *cpu;
int i;
Error *err = NULL;
target_ulong gcr_base;
bool itu_present = false;
bool saar_present = false;
for (i = 0; i < s->num_vp; i++) {
cpu = MIPS_CPU(cpu_create(s->cpu_type));
/* Init internal devices */
cpu_mips_irq_init_cpu(cpu);
cpu_mips_clock_init(cpu);
env = &cpu->env;
if (cpu_mips_itu_supported(env)) {
itu_present = true;
/* Attach ITC Tag to the VP */
env->itc_tag = mips_itu_get_tag_region(&s->itu);
env->itu = &s->itu;
}
qemu_register_reset(main_cpu_reset, cpu);
}
cpu = MIPS_CPU(first_cpu);
env = &cpu->env;
saar_present = (bool)env->saarp;
/* Inter-Thread Communication Unit */
if (itu_present) {
object_initialize(&s->itu, sizeof(s->itu), TYPE_MIPS_ITU);
qdev_set_parent_bus(DEVICE(&s->itu), sysbus_get_default());
object_property_set_int(OBJECT(&s->itu), 16, "num-fifo", &err);
object_property_set_int(OBJECT(&s->itu), 16, "num-semaphores", &err);
object_property_set_bool(OBJECT(&s->itu), saar_present, "saar-present",
&err);
if (saar_present) {
qdev_prop_set_ptr(DEVICE(&s->itu), "saar", (void *)&env->CP0_SAAR);
}
object_property_set_bool(OBJECT(&s->itu), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, 0,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->itu), 0));
}
/* Cluster Power Controller */
object_initialize(&s->cpc, sizeof(s->cpc), TYPE_MIPS_CPC);
qdev_set_parent_bus(DEVICE(&s->cpc), sysbus_get_default());
object_property_set_int(OBJECT(&s->cpc), s->num_vp, "num-vp", &err);
object_property_set_int(OBJECT(&s->cpc), 1, "vp-start-running", &err);
object_property_set_bool(OBJECT(&s->cpc), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, 0,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->cpc), 0));
/* Global Interrupt Controller */
object_initialize(&s->gic, sizeof(s->gic), TYPE_MIPS_GIC);
qdev_set_parent_bus(DEVICE(&s->gic), sysbus_get_default());
object_property_set_int(OBJECT(&s->gic), s->num_vp, "num-vp", &err);
object_property_set_int(OBJECT(&s->gic), 128, "num-irq", &err);
object_property_set_bool(OBJECT(&s->gic), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, 0,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gic), 0));
/* Global Configuration Registers */
gcr_base = env->CP0_CMGCRBase << 4;
object_initialize(&s->gcr, sizeof(s->gcr), TYPE_MIPS_GCR);
qdev_set_parent_bus(DEVICE(&s->gcr), sysbus_get_default());
object_property_set_int(OBJECT(&s->gcr), s->num_vp, "num-vp", &err);
object_property_set_int(OBJECT(&s->gcr), 0x800, "gcr-rev", &err);
object_property_set_int(OBJECT(&s->gcr), gcr_base, "gcr-base", &err);
object_property_set_link(OBJECT(&s->gcr), OBJECT(&s->gic.mr), "gic", &err);
object_property_set_link(OBJECT(&s->gcr), OBJECT(&s->cpc.mr), "cpc", &err);
object_property_set_bool(OBJECT(&s->gcr), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(&s->container, gcr_base,
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gcr), 0));
}
static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
{
MSF2State *s = MSF2_SOC(dev_soc);
DeviceState *dev, *armv7m;
SysBusDevice *busdev;
Error *err = NULL;
int i;
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *nvm = g_new(MemoryRegion, 1);
MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size,
&error_fatal);
/*
* On power-on, the eNVM region 0x60000000 is automatically
* remapped to the Cortex-M3 processor executable region
* start address (0x0). We do not support remapping other eNVM,
* eSRAM and DDR regions by guest(via Sysreg) currently.
*/
memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM",
nvm, 0, s->envm_size);
memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
memory_region_add_subregion(system_memory, 0, nvm_alias);
memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
&error_fatal);
memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
armv7m = DEVICE(&s->armv7m);
qdev_prop_set_uint32(armv7m, "num-irq", 81);
qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()),
"memory", &error_abort);
object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
if (!s->m3clk) {
error_setg(errp, "Invalid m3clk value");
error_append_hint(errp, "m3clk can not be zero\n");
return;
}
qdev_connect_gpio_out_named(DEVICE(&s->armv7m.nvic), "SYSRESETREQ", 0,
qemu_allocate_irq(&do_sys_reset, NULL, 0));
system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;
for (i = 0; i < MSF2_NUM_UARTS; i++) {
if (serial_hd(i)) {
serial_mm_init(get_system_memory(), uart_addr[i], 2,
qdev_get_gpio_in(armv7m, uart_irq[i]),
115200, serial_hd(i), DEVICE_NATIVE_ENDIAN);
}
}
dev = DEVICE(&s->timer);
/* APB0 clock is the timer input clock */
qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div);
object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(armv7m, timer_irq[0]));
sysbus_connect_irq(busdev, 1,
qdev_get_gpio_in(armv7m, timer_irq[1]));
dev = DEVICE(&s->sysreg);
qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div);
qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div);
object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);
for (i = 0; i < MSF2_NUM_SPIS; i++) {
gchar *bus_name;
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
qdev_get_gpio_in(armv7m, spi_irq[i]));
/* Alias controller SPI bus to the SoC itself */
bus_name = g_strdup_printf("spi%d", i);
object_property_add_alias(OBJECT(s), bus_name,
OBJECT(&s->spi[i]), "spi",
&error_abort);
g_free(bus_name);
}
/* Below devices are not modelled yet. */
create_unimplemented_device("i2c_0", 0x40002000, 0x1000);
create_unimplemented_device("dma", 0x40003000, 0x1000);
create_unimplemented_device("watchdog", 0x40005000, 0x1000);
create_unimplemented_device("i2c_1", 0x40012000, 0x1000);
create_unimplemented_device("gpio", 0x40013000, 0x1000);
create_unimplemented_device("hs-dma", 0x40014000, 0x1000);
create_unimplemented_device("can", 0x40015000, 0x1000);
create_unimplemented_device("rtc", 0x40017000, 0x1000);
create_unimplemented_device("apb_config", 0x40020000, 0x10000);
create_unimplemented_device("emac", 0x40041000, 0x1000);
create_unimplemented_device("usb", 0x40043000, 0x1000);
}
static void
petalogix_ml605_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
MemoryRegion *address_space_mem = get_system_memory();
DeviceState *dev, *dma, *eth0;
Object *ds, *cs;
MicroBlazeCPU *cpu;
SysBusDevice *busdev;
DriveInfo *dinfo;
int i;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
/* init CPUs */
cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
/* Use FPU but don't use floating point conversion and square
* root instructions
*/
object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
&error_abort);
object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
LMB_BRAM_SIZE, &error_fatal);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
&error_fatal);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* 5th parameter 2 means bank-width
* 10th paremeter 0 means little-endian */
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_ml605.flash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
(64 * 1024), FLASH_SIZE >> 16,
2, 0x89, 0x18, 0x0000, 0x0, 0);
dev = qdev_create(NULL, "xlnx.xps-intc");
qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
irq[UART16550_IRQ], 115200, serial_hds[0],
DEVICE_LITTLE_ENDIAN);
/* 2 timers at irq 2 @ 100 Mhz. */
dev = qdev_create(NULL, "xlnx.xps-timer");
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
/* axi ethernet and dma initialization. */
qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
dma = qdev_create(NULL, "xlnx.axi-dma");
/* FIXME: attach to the sysbus instead */
object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
NULL);
object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
NULL);
ds = object_property_get_link(OBJECT(dma),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(dma),
"axistream-control-connected-target", NULL);
qdev_set_nic_properties(eth0, &nd_table[0]);
qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
qdev_prop_set_uint32(eth0, "txmem", 0x1000);
object_property_set_link(OBJECT(eth0), OBJECT(ds),
"axistream-connected", &error_abort);
object_property_set_link(OBJECT(eth0), OBJECT(cs),
"axistream-control-connected", &error_abort);
qdev_init_nofail(eth0);
sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
ds = object_property_get_link(OBJECT(eth0),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(eth0),
"axistream-control-connected-target", NULL);
qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
object_property_set_link(OBJECT(dma), OBJECT(ds),
"axistream-connected", &error_abort);
object_property_set_link(OBJECT(dma), OBJECT(cs),
"axistream-control-connected", &error_abort);
qdev_init_nofail(dma);
sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
{
SSIBus *spi;
dev = qdev_create(NULL, "xlnx.xps-spi");
qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
for (i = 0; i < NUM_SPI_FLASHES; i++) {
qemu_irq cs_line;
dev = ssi_create_slave(spi, "n25q128");
cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
/* setup PVR to match kernel settings */
cpu->env.pvr.regs[4] = 0xc56b8000;
cpu->env.pvr.regs[5] = 0xc56be000;
cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
machine->initrd_filename,
BINARY_DEVICE_TREE_FILE,
NULL);
}
static void mps2_common_init(MachineState *machine)
{
MPS2MachineState *mms = MPS2_MACHINE(machine);
MPS2MachineClass *mmc = MPS2_MACHINE_GET_CLASS(machine);
MemoryRegion *system_memory = get_system_memory();
MachineClass *mc = MACHINE_GET_CLASS(machine);
DeviceState *armv7m, *sccdev;
if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
error_report("This board can only be used with CPU %s",
mc->default_cpu_type);
exit(1);
}
/* The FPGA images have an odd combination of different RAMs,
* because in hardware they are different implementations and
* connected to different buses, giving varying performance/size
* tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
* call the 16MB our "system memory", as it's the largest lump.
*
* Common to both boards:
* 0x21000000..0x21ffffff : PSRAM (16MB)
* AN385 only:
* 0x00000000 .. 0x003fffff : ZBT SSRAM1
* 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
* 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
* 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3
* 0x01000000 .. 0x01003fff : block RAM (16K)
* 0x01004000 .. 0x01007fff : mirror of above
* 0x01008000 .. 0x0100bfff : mirror of above
* 0x0100c000 .. 0x0100ffff : mirror of above
* AN511 only:
* 0x00000000 .. 0x0003ffff : FPGA block RAM
* 0x00400000 .. 0x007fffff : ZBT SSRAM1
* 0x20000000 .. 0x2001ffff : SRAM
* 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
*
* The AN385 has a feature where the lowest 16K can be mapped
* either to the bottom of the ZBT SSRAM1 or to the block RAM.
* This is of no use for QEMU so we don't implement it (as if
* zbt_boot_ctrl is always zero).
*/
memory_region_allocate_system_memory(&mms->psram,
NULL, "mps.ram", 0x1000000);
memory_region_add_subregion(system_memory, 0x21000000, &mms->psram);
switch (mmc->fpga_type) {
case FPGA_AN385:
make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
make_ram_alias(&mms->ssram23_m, "mps.ssram23_m",
&mms->ssram23, 0x20400000);
make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000);
make_ram_alias(&mms->blockram_m1, "mps.blockram_m1",
&mms->blockram, 0x01004000);
make_ram_alias(&mms->blockram_m2, "mps.blockram_m2",
&mms->blockram, 0x01008000);
make_ram_alias(&mms->blockram_m3, "mps.blockram_m3",
&mms->blockram, 0x0100c000);
break;
case FPGA_AN511:
make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000);
make_ram(&mms->ssram1, "mps.ssram1", 0x00400000, 0x00800000);
make_ram(&mms->sram, "mps.sram", 0x20000000, 0x20000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20400000, 0x400000);
break;
default:
g_assert_not_reached();
}
sysbus_init_child_obj(OBJECT(mms), "armv7m", &mms->armv7m,
sizeof(mms->armv7m), TYPE_ARMV7M);
armv7m = DEVICE(&mms->armv7m);
switch (mmc->fpga_type) {
case FPGA_AN385:
qdev_prop_set_uint32(armv7m, "num-irq", 32);
break;
case FPGA_AN511:
qdev_prop_set_uint32(armv7m, "num-irq", 64);
break;
default:
g_assert_not_reached();
}
qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory),
"memory", &error_abort);
object_property_set_bool(OBJECT(&mms->armv7m), true, "realized",
&error_fatal);
create_unimplemented_device("zbtsmram mirror", 0x00400000, 0x00400000);
create_unimplemented_device("RESERVED 1", 0x00800000, 0x00800000);
create_unimplemented_device("Block RAM", 0x01000000, 0x00010000);
create_unimplemented_device("RESERVED 2", 0x01010000, 0x1EFF0000);
create_unimplemented_device("RESERVED 3", 0x20800000, 0x00800000);
create_unimplemented_device("PSRAM", 0x21000000, 0x01000000);
/* These three ranges all cover multiple devices; we may implement
* some of them below (in which case the real device takes precedence
* over the unimplemented-region mapping).
*/
create_unimplemented_device("CMSDK APB peripheral region @0x40000000",
0x40000000, 0x00010000);
create_unimplemented_device("CMSDK peripheral region @0x40010000",
0x40010000, 0x00010000);
create_unimplemented_device("Extra peripheral region @0x40020000",
0x40020000, 0x00010000);
create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000);
create_unimplemented_device("VGA", 0x41000000, 0x0200000);
switch (mmc->fpga_type) {
case FPGA_AN385:
{
/* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
* Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
*/
Object *orgate;
DeviceState *orgate_dev;
int i;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, 6, "num-lines", &error_fatal);
object_property_set_bool(orgate, true, "realized", &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));
for (i = 0; i < 5; i++) {
static const hwaddr uartbase[] = {0x40004000, 0x40005000,
0x40006000, 0x40007000,
0x40009000};
/* RX irq number; TX irq is always one greater */
static const int uartirq[] = {0, 2, 4, 18, 20};
qemu_irq txovrint = NULL, rxovrint = NULL;
if (i < 3) {
txovrint = qdev_get_gpio_in(orgate_dev, i * 2);
rxovrint = qdev_get_gpio_in(orgate_dev, i * 2 + 1);
}
cmsdk_apb_uart_create(uartbase[i],
qdev_get_gpio_in(armv7m, uartirq[i] + 1),
qdev_get_gpio_in(armv7m, uartirq[i]),
txovrint, rxovrint,
NULL,
serial_hd(i), SYSCLK_FRQ);
}
break;
}
case FPGA_AN511:
{
/* The overflow IRQs for all UARTs are ORed together.
* Tx and Rx IRQs for each UART are ORed together.
*/
Object *orgate;
DeviceState *orgate_dev;
int i;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, 10, "num-lines", &error_fatal);
object_property_set_bool(orgate, true, "realized", &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));
for (i = 0; i < 5; i++) {
/* system irq numbers for the combined tx/rx for each UART */
static const int uart_txrx_irqno[] = {0, 2, 45, 46, 56};
static const hwaddr uartbase[] = {0x40004000, 0x40005000,
0x4002c000, 0x4002d000,
0x4002e000};
Object *txrx_orgate;
DeviceState *txrx_orgate_dev;
txrx_orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(txrx_orgate, 2, "num-lines", &error_fatal);
object_property_set_bool(txrx_orgate, true, "realized",
&error_fatal);
txrx_orgate_dev = DEVICE(txrx_orgate);
qdev_connect_gpio_out(txrx_orgate_dev, 0,
qdev_get_gpio_in(armv7m, uart_txrx_irqno[i]));
cmsdk_apb_uart_create(uartbase[i],
qdev_get_gpio_in(txrx_orgate_dev, 0),
qdev_get_gpio_in(txrx_orgate_dev, 1),
qdev_get_gpio_in(orgate_dev, i * 2),
qdev_get_gpio_in(orgate_dev, i * 2 + 1),
NULL,
serial_hd(i), SYSCLK_FRQ);
}
break;
}
default:
g_assert_not_reached();
}
cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ);
cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ);
sysbus_init_child_obj(OBJECT(mms), "dualtimer", &mms->dualtimer,
sizeof(mms->dualtimer), TYPE_CMSDK_APB_DUALTIMER);
qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ);
object_property_set_bool(OBJECT(&mms->dualtimer), true, "realized",
&error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
qdev_get_gpio_in(armv7m, 10));
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000);
sysbus_init_child_obj(OBJECT(mms), "scc", &mms->scc,
sizeof(mms->scc), TYPE_MPS2_SCC);
sccdev = DEVICE(&mms->scc);
qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2);
qdev_prop_set_uint32(sccdev, "scc-aid", 0x00200008);
qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id);
object_property_set_bool(OBJECT(&mms->scc), true, "realized",
&error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000);
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
lan9118_init(&nd_table[0], 0x40200000,
qdev_get_gpio_in(armv7m,
mmc->fpga_type == FPGA_AN385 ? 13 : 47));
system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
0x400000);
}
static void zynq_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
A9MPPrivState *mpcore;
ObjectClass *cpu_oc;
ARMCPU *cpu[MAX_CPUS];
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq pic[64];
Error *err = NULL;
int n;
if (machine->cpu_model) {
error_report("Zynq does not support CPU model override!\n");
exit(1);
}
if (!cpu_model) {
cpu_model = "cortex-a9";
}
cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
for (n = 0; n < smp_cpus; n++) {
cpu[n] = ARM_CPU(object_new(object_class_get_name(cpu_oc)));
/* By default A9 CPUs have EL3 enabled. This board does not
* currently support EL3 so the CPU EL3 property is disabled before
* realization.
*/
if (object_property_find(OBJECT(cpu[n]), "has_el3", NULL)) {
object_property_set_bool(OBJECT(cpu[n]), false, "has_el3", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
object_property_set_int(OBJECT(cpu[n]), ZYNQ_BOARD_MIDR, "midr", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
object_property_set_int(OBJECT(cpu[n]), MPCORE_PERIPHBASE,
"reset-cbar", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
object_property_set_bool(OBJECT(cpu[n]), true, "realized", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
/* max 2GB ram */
if (ram_size > 0x80000000) {
ram_size = 0x80000000;
}
/* pl353 */
dev = qdev_create(NULL, "arm.pl35x");
/* FIXME: handle this somewhere central */
object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
"pl353", OBJECT(dev), NULL);
qdev_prop_set_uint8(dev, "x", 3);
{
DriveInfo *dinfo = drive_get_next(IF_PFLASH);
BlockBackend *blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
DeviceState *att_dev = qdev_create(NULL, "cfi.pflash02");
Error *errp = NULL;
if (blk && qdev_prop_set_drive(att_dev, "drive", blk)) {
abort();
}
qdev_prop_set_uint32(att_dev, "num-blocks",
FLASH_SIZE/FLASH_SECTOR_SIZE);
qdev_prop_set_uint32(att_dev, "sector-length", FLASH_SECTOR_SIZE);
qdev_prop_set_uint8(att_dev, "width", 1);
qdev_prop_set_uint8(att_dev, "mappings", 1);
qdev_prop_set_uint8(att_dev, "big-endian", 0);
qdev_prop_set_uint16(att_dev, "id0", 0x0066);
qdev_prop_set_uint16(att_dev, "id1", 0x0022);
qdev_prop_set_uint16(att_dev, "id2", 0x0000);
qdev_prop_set_uint16(att_dev, "id3", 0x0000);
qdev_prop_set_uint16(att_dev, "unlock-addr0", 0x0aaa);
qdev_prop_set_uint16(att_dev, "unlock-addr1", 0x0555);
qdev_prop_set_string(att_dev, "name", "pl353.pflash");
qdev_init_nofail(att_dev);
object_property_set_link(OBJECT(dev), OBJECT(att_dev), "dev0", &errp);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
dinfo = drive_get_next(IF_PFLASH);
att_dev = nand_init(dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
NAND_MFR_STMICRO, 0xaa);
object_property_set_link(OBJECT(dev), OBJECT(att_dev), "dev1", &errp);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xe000e000);
sysbus_mmio_map(busdev, 1, 0xe2000000);
sysbus_mmio_map(busdev, 2, 0xe1000000);
/* DDR remapped to address zero. */
memory_region_allocate_system_memory(ext_ram, NULL, "zynq.ext_ram",
ram_size);
memory_region_add_subregion(address_space_mem, 0, ext_ram);
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10,
&error_abort);
vmstate_register_ram_global(ocm_ram);
memory_region_add_subregion(address_space_mem, OCM_BASE, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
/* AMD */
pflash_cfi02_register(0xe2000000, NULL, "zynq.pflash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
FLASH_SECTOR_SIZE,
FLASH_SIZE/FLASH_SECTOR_SIZE, 1,
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
dev = qdev_create(NULL, "xilinx,zynq_slcr");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
for (n = 0; n < smp_cpus; n++) {
qdev_connect_gpio_out(dev, n,
qdev_get_gpio_in(DEVICE(cpu[n]), 0));
}
mpcore = A9MPCORE_PRIV(object_new("a9mpcore_priv"));
qdev_prop_set_uint32(DEVICE(mpcore), "num-cpu", smp_cpus);
object_property_set_bool(OBJECT(mpcore), true, "realized", &err);
if (err != NULL) {
error_report("Couldn't realize the Zynq A9MPCore: %s",
error_get_pretty(err));
exit(1);
}
busdev = SYS_BUS_DEVICE(DEVICE(mpcore));
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n,
qdev_get_gpio_in(DEVICE(cpu[n]), ARM_CPU_IRQ));
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
zynq_init_zc70x_i2c(0xE0004000, pic[57-IRQ_OFFSET]);
zynq_init_zc70x_i2c(0xE0005000, pic[80-IRQ_OFFSET]);
dev = qdev_create(NULL, "xlnx,ps7-usb");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xE0002000);
sysbus_connect_irq(busdev, 0, pic[53-IRQ_OFFSET]);
dev = qdev_create(NULL, "xlnx,ps7-usb");
busdev = SYS_BUS_DEVICE(dev);
qdev_init_nofail(dev);
sysbus_mmio_map(busdev, 0, 0xE0003000);
sysbus_connect_irq(busdev, 0, pic[76-IRQ_OFFSET]);
zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true);
sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]);
gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
dev = qdev_create(NULL, TYPE_ZYNQ_XADC);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]);
dev = qdev_create(NULL, "pl330");
qdev_prop_set_uint8(dev, "num_chnls", 8);
qdev_prop_set_uint8(dev, "num_periph_req", 4);
qdev_prop_set_uint8(dev, "num_events", 16);
qdev_prop_set_uint8(dev, "data_width", 64);
qdev_prop_set_uint8(dev, "wr_cap", 8);
qdev_prop_set_uint8(dev, "wr_q_dep", 16);
qdev_prop_set_uint8(dev, "rd_cap", 8);
qdev_prop_set_uint8(dev, "rd_q_dep", 16);
qdev_prop_set_uint16(dev, "data_buffer_dep", 256);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xF8003000);
sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
for (n = 0; n < 8; ++n) { /* event irqs */
sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
}
dev = qdev_create(NULL, "xlnx.ps7-dev-cfg");
object_property_add_child(qdev_get_machine(), "xilinx-devcfg", OBJECT(dev),
NULL);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(busdev, 0, pic[40-IRQ_OFFSET]);
sysbus_mmio_map(busdev, 0, 0xF8007000);
zynq_binfo.ram_size = ram_size;
zynq_binfo.kernel_filename = kernel_filename;
zynq_binfo.kernel_cmdline = kernel_cmdline;
zynq_binfo.initrd_filename = initrd_filename;
zynq_binfo.nb_cpus = smp_cpus;
zynq_binfo.write_secondary_boot = zynq_write_secondary_boot;
zynq_binfo.secondary_cpu_reset_hook = zynq_reset_secondary;
zynq_binfo.smp_loader_start = SMP_BOOT_ADDR;
zynq_binfo.board_id = 0xd32;
zynq_binfo.loader_start = 0;
arm_load_kernel(ARM_CPU(first_cpu), &zynq_binfo);
}
static void versal_virt_init(MachineState *machine)
{
VersalVirt *s = XLNX_VERSAL_VIRT_MACHINE(machine);
int psci_conduit = QEMU_PSCI_CONDUIT_DISABLED;
/*
* If the user provides an Operating System to be loaded, we expect them
* to use the -kernel command line option.
*
* Users can load firmware or boot-loaders with the -device loader options.
*
* When loading an OS, we generate a dtb and let arm_load_kernel() select
* where it gets loaded. This dtb will be passed to the kernel in x0.
*
* If there's no -kernel option, we generate a DTB and place it at 0x1000
* for the bootloaders or firmware to pick up.
*
* If users want to provide their own DTB, they can use the -dtb option.
* These dtb's will have their memory nodes modified to match QEMU's
* selected ram_size option before they get passed to the kernel or fw.
*
* When loading an OS, we turn on QEMU's PSCI implementation with SMC
* as the PSCI conduit. When there's no -kernel, we assume the user
* provides EL3 firmware to handle PSCI.
*/
if (machine->kernel_filename) {
psci_conduit = QEMU_PSCI_CONDUIT_SMC;
}
memory_region_allocate_system_memory(&s->mr_ddr, NULL, "ddr",
machine->ram_size);
sysbus_init_child_obj(OBJECT(machine), "xlnx-ve", &s->soc,
sizeof(s->soc), TYPE_XLNX_VERSAL);
object_property_set_link(OBJECT(&s->soc), OBJECT(&s->mr_ddr),
"ddr", &error_abort);
object_property_set_int(OBJECT(&s->soc), psci_conduit,
"psci-conduit", &error_abort);
object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal);
fdt_create(s);
create_virtio_regions(s);
fdt_add_gem_nodes(s);
fdt_add_uart_nodes(s);
fdt_add_gic_nodes(s);
fdt_add_timer_nodes(s);
fdt_add_cpu_nodes(s, psci_conduit);
fdt_add_clk_node(s, "/clk125", 125000000, s->phandle.clk_125Mhz);
fdt_add_clk_node(s, "/clk25", 25000000, s->phandle.clk_25Mhz);
/* Make the APU cpu address space visible to virtio and other
* modules unaware of muliple address-spaces. */
memory_region_add_subregion_overlap(get_system_memory(),
0, &s->soc.fpd.apu.mr, 0);
s->binfo.ram_size = machine->ram_size;
s->binfo.kernel_filename = machine->kernel_filename;
s->binfo.kernel_cmdline = machine->kernel_cmdline;
s->binfo.initrd_filename = machine->initrd_filename;
s->binfo.loader_start = 0x0;
s->binfo.get_dtb = versal_virt_get_dtb;
s->binfo.modify_dtb = versal_virt_modify_dtb;
if (machine->kernel_filename) {
arm_load_kernel(s->soc.fpd.apu.cpu[0], &s->binfo);
} else {
AddressSpace *as = arm_boot_address_space(s->soc.fpd.apu.cpu[0],
&s->binfo);
/* Some boot-loaders (e.g u-boot) don't like blobs at address 0 (NULL).
* Offset things by 4K. */
s->binfo.loader_start = 0x1000;
s->binfo.dtb_limit = 0x1000000;
if (arm_load_dtb(s->binfo.loader_start,
&s->binfo, s->binfo.dtb_limit, as) < 0) {
exit(EXIT_FAILURE);
}
}
}
static void ppc_heathrow_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
const char *boot_device = machine->boot_order;
MemoryRegion *sysmem = get_system_memory();
PowerPCCPU *cpu = NULL;
CPUPPCState *env = NULL;
char *filename;
int linux_boot, i;
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *bios = g_new(MemoryRegion, 1);
uint32_t kernel_base, initrd_base, cmdline_base = 0;
int32_t kernel_size, initrd_size;
PCIBus *pci_bus;
OldWorldMacIOState *macio;
MACIOIDEState *macio_ide;
SysBusDevice *s;
DeviceState *dev, *pic_dev;
BusState *adb_bus;
int bios_size;
uint16_t ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
uint64_t tbfreq;
linux_boot = (kernel_filename != NULL);
/* init CPUs */
for (i = 0; i < smp_cpus; i++) {
cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
/* Set time-base frequency to 16.6 Mhz */
cpu_ppc_tb_init(env, TBFREQ);
qemu_register_reset(ppc_heathrow_reset, cpu);
}
/* allocate RAM */
if (ram_size > 2047 * MiB) {
error_report("Too much memory for this machine: %" PRId64 " MB, "
"maximum 2047 MB", ram_size / MiB);
exit(1);
}
memory_region_allocate_system_memory(ram, NULL, "ppc_heathrow.ram",
ram_size);
memory_region_add_subregion(sysmem, 0, ram);
/* allocate and load BIOS */
memory_region_init_ram(bios, NULL, "ppc_heathrow.bios", BIOS_SIZE,
&error_fatal);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
memory_region_set_readonly(bios, true);
memory_region_add_subregion(sysmem, PROM_ADDR, bios);
/* Load OpenBIOS (ELF) */
if (filename) {
bios_size = load_elf(filename, NULL, 0, NULL, NULL, NULL, NULL,
1, PPC_ELF_MACHINE, 0, 0);
g_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_size > BIOS_SIZE) {
error_report("could not load PowerPC bios '%s'", bios_name);
exit(1);
}
if (linux_boot) {
uint64_t lowaddr = 0;
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_base = KERNEL_LOAD_ADDR;
kernel_size = load_elf(kernel_filename, NULL,
translate_kernel_address, NULL,
NULL, &lowaddr, NULL, 1, PPC_ELF_MACHINE,
0, 0);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, kernel_base,
ram_size - kernel_base, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
} else {
initrd_base = 0;
initrd_size = 0;
cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
for (i = 0; boot_device[i] != '\0'; i++) {
/* TOFIX: for now, the second IDE channel is not properly
* used by OHW. The Mac floppy disk are not emulated.
* For now, OHW cannot boot from the network.
*/
#if 0
if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
#else
if (boot_device[i] >= 'c' && boot_device[i] <= 'd') {
ppc_boot_device = boot_device[i];
break;
}
#endif
}
if (ppc_boot_device == '\0') {
error_report("No valid boot device for G3 Beige machine");
exit(1);
}
}
/* XXX: we register only 1 output pin for heathrow PIC */
pic_dev = qdev_create(NULL, TYPE_HEATHROW);
qdev_init_nofail(pic_dev);
/* Connect the heathrow PIC outputs to the 6xx bus */
for (i = 0; i < smp_cpus; i++) {
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
qdev_connect_gpio_out(pic_dev, 0,
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT]);
break;
default:
error_report("Bus model not supported on OldWorld Mac machine");
exit(1);
}
}
/* Timebase Frequency */
if (kvm_enabled()) {
tbfreq = kvmppc_get_tbfreq();
} else {
tbfreq = TBFREQ;
}
/* init basic PC hardware */
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
error_report("Only 6xx bus is supported on heathrow machine");
exit(1);
}
/* Grackle PCI host bridge */
dev = qdev_create(NULL, TYPE_GRACKLE_PCI_HOST_BRIDGE);
qdev_prop_set_uint32(dev, "ofw-addr", 0x80000000);
object_property_set_link(OBJECT(dev), OBJECT(pic_dev), "pic",
&error_abort);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, GRACKLE_BASE);
sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000);
/* PCI hole */
memory_region_add_subregion(get_system_memory(), 0x80000000ULL,
sysbus_mmio_get_region(s, 2));
/* Register 2 MB of ISA IO space */
memory_region_add_subregion(get_system_memory(), 0xfe000000,
sysbus_mmio_get_region(s, 3));
pci_bus = PCI_HOST_BRIDGE(dev)->bus;
pci_vga_init(pci_bus);
for (i = 0; i < nb_nics; i++) {
pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
}
ide_drive_get(hd, ARRAY_SIZE(hd));
/* MacIO */
macio = OLDWORLD_MACIO(pci_create(pci_bus, -1, TYPE_OLDWORLD_MACIO));
dev = DEVICE(macio);
qdev_prop_set_uint64(dev, "frequency", tbfreq);
object_property_set_link(OBJECT(macio), OBJECT(pic_dev), "pic",
&error_abort);
qdev_init_nofail(dev);
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[0]"));
macio_ide_init_drives(macio_ide, hd);
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[1]"));
macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]);
dev = DEVICE(object_resolve_path_component(OBJECT(macio), "cuda"));
adb_bus = qdev_get_child_bus(dev, "adb.0");
dev = qdev_create(adb_bus, TYPE_ADB_KEYBOARD);
qdev_init_nofail(dev);
dev = qdev_create(adb_bus, TYPE_ADB_MOUSE);
qdev_init_nofail(dev);
if (machine_usb(machine)) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
/* No PCI init: the BIOS will do it */
dev = qdev_create(NULL, TYPE_FW_CFG_MEM);
fw_cfg = FW_CFG(dev);
qdev_prop_set_uint32(dev, "data_width", 1);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
OBJECT(fw_cfg), NULL);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, CFG_ADDR);
sysbus_mmio_map(s, 1, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE, kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
if (kvm_enabled()) {
#ifdef CONFIG_KVM
uint8_t *hypercall;
hypercall = g_malloc(16);
kvmppc_get_hypercall(env, hypercall, 16);
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
#endif
}
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq);
/* Mac OS X requires a "known good" clock-frequency value; pass it one. */
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ);
/* MacOS NDRV VGA driver */
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME);
if (filename) {
gchar *ndrv_file;
gsize ndrv_size;
if (g_file_get_contents(filename, &ndrv_file, &ndrv_size, NULL)) {
fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size);
}
g_free(filename);
}
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *gsi;
qemu_irq *i8259;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
PcGuestInfo *guest_info;
ram_addr_t lowmem;
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
* For old machine types, use whatever split we used historically to avoid
* breaking migration.
*/
if (machine->ram_size >= 0xe0000000) {
lowmem = gigabyte_align ? 0xc0000000 : 0xe0000000;
} else {
lowmem = 0xe0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pcms->max_ram_below_4g) {
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pcms->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
if (xen_enabled() && xen_hvm_init(pcms, &ram_memory) != 0) {
fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
exit(1);
}
pc_cpus_init(pcms);
if (kvm_enabled() && kvmclock_enabled) {
kvmclock_create();
}
if (pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
guest_info = pc_guest_info_init(pcms);
guest_info->has_acpi_build = has_acpi_build;
guest_info->legacy_acpi_table_size = legacy_acpi_table_size;
guest_info->isapc_ram_fw = !pci_enabled;
guest_info->has_reserved_memory = has_reserved_memory;
guest_info->rsdp_in_ram = rsdp_in_ram;
if (smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, smbios_legacy_mode, smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory, guest_info);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms, guest_info);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
if (pci_enabled) {
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state, &piix3_devfn, &isa_bus, gsi,
system_memory, system_io, machine->ram_size,
pcms->below_4g_mem_size,
pcms->above_4g_mem_size,
pci_memory, ram_memory);
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, gsi);
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
pc_register_ferr_irq(gsi[13]);
pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), 0x4);
pc_nic_init(isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
if (pci_enabled && usb_enabled()) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
I2CBus *smbus;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (pci_enabled) {
pc_pci_device_init(pci_bus);
}
}
static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine)
{
int i;
uint64_t ram_size = machine->ram_size;
/* Create the memory region to pass to the SoC */
if (ram_size > XLNX_ZYNQMP_MAX_RAM_SIZE) {
error_report("ERROR: RAM size 0x%" PRIx64 " above max supported of "
"0x%llx", ram_size,
XLNX_ZYNQMP_MAX_RAM_SIZE);
exit(1);
}
if (ram_size < 0x08000000) {
qemu_log("WARNING: RAM size 0x%" PRIx64 " is small for ZCU102",
ram_size);
}
memory_region_allocate_system_memory(&s->ddr_ram, NULL, "ddr-ram",
ram_size);
object_initialize(&s->soc, sizeof(s->soc), TYPE_XLNX_ZYNQMP);
object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
&error_abort);
object_property_set_link(OBJECT(&s->soc), OBJECT(&s->ddr_ram),
"ddr-ram", &error_abort);
object_property_set_bool(OBJECT(&s->soc), s->secure, "secure",
&error_fatal);
object_property_set_bool(OBJECT(&s->soc), s->virt, "virtualization",
&error_fatal);
object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal);
/* Create and plug in the SD cards */
for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) {
BusState *bus;
DriveInfo *di = drive_get_next(IF_SD);
BlockBackend *blk = di ? blk_by_legacy_dinfo(di) : NULL;
DeviceState *carddev;
char *bus_name;
bus_name = g_strdup_printf("sd-bus%d", i);
bus = qdev_get_child_bus(DEVICE(&s->soc), bus_name);
g_free(bus_name);
if (!bus) {
error_report("No SD bus found for SD card %d", i);
exit(1);
}
carddev = qdev_create(bus, TYPE_SD_CARD);
qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
object_property_set_bool(OBJECT(carddev), true, "realized",
&error_fatal);
}
for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
SSIBus *spi_bus;
DeviceState *flash_dev;
qemu_irq cs_line;
DriveInfo *dinfo = drive_get_next(IF_MTD);
gchar *bus_name = g_strdup_printf("spi%d", i);
spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(&s->soc), bus_name);
g_free(bus_name);
flash_dev = ssi_create_slave_no_init(spi_bus, "sst25wf080");
if (dinfo) {
qdev_prop_set_drive(flash_dev, "drive", blk_by_legacy_dinfo(dinfo),
&error_fatal);
}
qdev_init_nofail(flash_dev);
cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi[i]), 1, cs_line);
}
for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_FLASH; i++) {
SSIBus *spi_bus;
DeviceState *flash_dev;
qemu_irq cs_line;
DriveInfo *dinfo = drive_get_next(IF_MTD);
int bus = i / XLNX_ZYNQMP_NUM_QSPI_BUS_CS;
gchar *bus_name = g_strdup_printf("qspi%d", bus);
spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(&s->soc), bus_name);
g_free(bus_name);
flash_dev = ssi_create_slave_no_init(spi_bus, "n25q512a11");
if (dinfo) {
qdev_prop_set_drive(flash_dev, "drive", blk_by_legacy_dinfo(dinfo),
&error_fatal);
}
qdev_init_nofail(flash_dev);
cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.qspi), i + 1, cs_line);
}
/* TODO create and connect IDE devices for ide_drive_get() */
xlnx_zcu102_binfo.ram_size = ram_size;
xlnx_zcu102_binfo.kernel_filename = machine->kernel_filename;
xlnx_zcu102_binfo.kernel_cmdline = machine->kernel_cmdline;
xlnx_zcu102_binfo.initrd_filename = machine->initrd_filename;
xlnx_zcu102_binfo.loader_start = 0;
arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo);
}
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *gsi;
qemu_irq *i8259;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
ram_addr_t lowmem;
/*
* Calculate ram split, for memory below and above 4G. It's a bit
* complicated for backward compatibility reasons ...
*
* - Traditional split is 3.5G (lowmem = 0xe0000000). This is the
* default value for max_ram_below_4g now.
*
* - Then, to gigabyte align the memory, we move the split to 3G
* (lowmem = 0xc0000000). But only in case we have to split in
* the first place, i.e. ram_size is larger than (traditional)
* lowmem. And for new machine types (gigabyte_align = true)
* only, for live migration compatibility reasons.
*
* - Next the max-ram-below-4g option was added, which allowed to
* reduce lowmem to a smaller value, to allow a larger PCI I/O
* window below 4G. qemu doesn't enforce gigabyte alignment here,
* but prints a warning.
*
* - Finally max-ram-below-4g got updated to also allow raising lowmem,
* so legacy non-PAE guests can get as much memory as possible in
* the 32bit address space below 4G.
*
* - Note that Xen has its own ram setp code in xen_ram_init(),
* called via xen_hvm_init().
*
* Examples:
* qemu -M pc-1.7 -m 4G (old default) -> 3584M low, 512M high
* qemu -M pc -m 4G (new default) -> 3072M low, 1024M high
* qemu -M pc,max-ram-below-4g=2G -m 4G -> 2048M low, 2048M high
* qemu -M pc,max-ram-below-4g=4G -m 3968M -> 3968M low (=4G-128M)
*/
if (xen_enabled()) {
xen_hvm_init(pcms, &ram_memory);
} else {
if (!pcms->max_ram_below_4g) {
pcms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
}
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size >= pcms->max_ram_below_4g) {
if (pcmc->gigabyte_align) {
if (lowmem > 0xc0000000) {
lowmem = 0xc0000000;
}
if (lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g "
"(%" PRIu64 ") not a multiple of 1G; "
"possible bad performance.",
pcms->max_ram_below_4g);
}
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
}
pc_cpus_init(pcms);
if (kvm_enabled() && pcmc->kvmclock_enabled) {
kvmclock_create();
}
if (pcmc->pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
pc_guest_info_init(pcms);
if (pcmc->smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, pcmc->smbios_legacy_mode,
pcmc->smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pcmc->pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
if (pcmc->pci_enabled) {
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state, &piix3_devfn, &isa_bus, gsi,
system_memory, system_io, machine->ram_size,
pcms->below_4g_mem_size,
pcms->above_4g_mem_size,
pci_memory, ram_memory);
pcms->bus = pci_bus;
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io,
&error_abort);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, gsi);
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pcmc->pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
pc_register_ferr_irq(gsi[13]);
pc_vga_init(isa_bus, pcmc->pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), 0x4);
pc_nic_init(isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pcmc->pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
if (pcmc->pci_enabled && machine_usb(machine)) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pcmc->pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
I2CBus *smbus;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (pcmc->pci_enabled) {
pc_pci_device_init(pci_bus);
}
if (pcms->acpi_nvdimm_state.is_enabled) {
nvdimm_init_acpi_state(&pcms->acpi_nvdimm_state, system_io,
pcms->fw_cfg, OBJECT(pcms));
}
}
static void mps2tz_common_init(MachineState *machine)
{
MPS2TZMachineState *mms = MPS2TZ_MACHINE(machine);
MachineClass *mc = MACHINE_GET_CLASS(machine);
MemoryRegion *system_memory = get_system_memory();
DeviceState *iotkitdev;
DeviceState *dev_splitter;
int i;
if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
error_report("This board can only be used with CPU %s",
mc->default_cpu_type);
exit(1);
}
sysbus_init_child_obj(OBJECT(machine), "iotkit", &mms->iotkit,
sizeof(mms->iotkit), TYPE_IOTKIT);
iotkitdev = DEVICE(&mms->iotkit);
object_property_set_link(OBJECT(&mms->iotkit), OBJECT(system_memory),
"memory", &error_abort);
qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", 92);
qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ);
object_property_set_bool(OBJECT(&mms->iotkit), true, "realized",
&error_fatal);
/* The sec_resp_cfg output from the IoTKit must be split into multiple
* lines, one for each of the PPCs we create here.
*/
object_initialize(&mms->sec_resp_splitter, sizeof(mms->sec_resp_splitter),
TYPE_SPLIT_IRQ);
object_property_add_child(OBJECT(machine), "sec-resp-splitter",
OBJECT(&mms->sec_resp_splitter), &error_abort);
object_property_set_int(OBJECT(&mms->sec_resp_splitter), 5,
"num-lines", &error_fatal);
object_property_set_bool(OBJECT(&mms->sec_resp_splitter), true,
"realized", &error_fatal);
dev_splitter = DEVICE(&mms->sec_resp_splitter);
qdev_connect_gpio_out_named(iotkitdev, "sec_resp_cfg", 0,
qdev_get_gpio_in(dev_splitter, 0));
/* The IoTKit sets up much of the memory layout, including
* the aliases between secure and non-secure regions in the
* address space. The FPGA itself contains:
*
* 0x00000000..0x003fffff SSRAM1
* 0x00400000..0x007fffff alias of SSRAM1
* 0x28000000..0x283fffff 4MB SSRAM2 + SSRAM3
* 0x40100000..0x4fffffff AHB Master Expansion 1 interface devices
* 0x80000000..0x80ffffff 16MB PSRAM
*/
/* The FPGA images have an odd combination of different RAMs,
* because in hardware they are different implementations and
* connected to different buses, giving varying performance/size
* tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
* call the 16MB our "system memory", as it's the largest lump.
*/
memory_region_allocate_system_memory(&mms->psram,
NULL, "mps.ram", 0x01000000);
memory_region_add_subregion(system_memory, 0x80000000, &mms->psram);
/* The overflow IRQs for all UARTs are ORed together.
* Tx, Rx and "combined" IRQs are sent to the NVIC separately.
* Create the OR gate for this.
*/
object_initialize(&mms->uart_irq_orgate, sizeof(mms->uart_irq_orgate),
TYPE_OR_IRQ);
object_property_add_child(OBJECT(mms), "uart-irq-orgate",
OBJECT(&mms->uart_irq_orgate), &error_abort);
object_property_set_int(OBJECT(&mms->uart_irq_orgate), 10, "num-lines",
&error_fatal);
object_property_set_bool(OBJECT(&mms->uart_irq_orgate), true,
"realized", &error_fatal);
qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0,
qdev_get_gpio_in_named(iotkitdev, "EXP_IRQ", 15));
/* Most of the devices in the FPGA are behind Peripheral Protection
* Controllers. The required order for initializing things is:
* + initialize the PPC
* + initialize, configure and realize downstream devices
* + connect downstream device MemoryRegions to the PPC
* + realize the PPC
* + map the PPC's MemoryRegions to the places in the address map
* where the downstream devices should appear
* + wire up the PPC's control lines to the IoTKit object
*/
const PPCInfo ppcs[] = { {
.name = "apb_ppcexp0",
.ports = {
{ "ssram-0", make_mpc, &mms->ssram_mpc[0], 0x58007000, 0x1000 },
{ "ssram-1", make_mpc, &mms->ssram_mpc[1], 0x58008000, 0x1000 },
{ "ssram-2", make_mpc, &mms->ssram_mpc[2], 0x58009000, 0x1000 },
},
}, {
.name = "apb_ppcexp1",
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
const char *boot_device = machine->boot_order;
PowerPCCPU *cpu = NULL;
CPUPPCState *env = NULL;
char *filename;
qemu_irq *pic, **openpic_irqs;
MemoryRegion *isa = g_new(MemoryRegion, 1);
MemoryRegion *unin_memory = g_new(MemoryRegion, 1);
MemoryRegion *unin2_memory = g_new(MemoryRegion, 1);
int linux_boot, i, j, k;
MemoryRegion *ram = g_new(MemoryRegion, 1), *bios = g_new(MemoryRegion, 1);
hwaddr kernel_base, initrd_base, cmdline_base = 0;
long kernel_size, initrd_size;
PCIBus *pci_bus;
NewWorldMacIOState *macio;
MACIOIDEState *macio_ide;
BusState *adb_bus;
MacIONVRAMState *nvr;
int bios_size, ndrv_size;
uint8_t *ndrv_file;
int ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
int machine_arch;
SysBusDevice *s;
DeviceState *dev, *pic_dev;
int *token = g_new(int, 1);
hwaddr nvram_addr = 0xFFF04000;
uint64_t tbfreq;
linux_boot = (kernel_filename != NULL);
/* init CPUs */
for (i = 0; i < smp_cpus; i++) {
cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(env, TBFREQ);
qemu_register_reset(ppc_core99_reset, cpu);
}
/* allocate RAM */
memory_region_allocate_system_memory(ram, NULL, "ppc_core99.ram", ram_size);
memory_region_add_subregion(get_system_memory(), 0, ram);
/* allocate and load BIOS */
memory_region_init_ram(bios, NULL, "ppc_core99.bios", BIOS_SIZE,
&error_fatal);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
memory_region_set_readonly(bios, true);
memory_region_add_subregion(get_system_memory(), PROM_ADDR, bios);
/* Load OpenBIOS (ELF) */
if (filename) {
bios_size = load_elf(filename, NULL, NULL, NULL,
NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0);
g_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_size > BIOS_SIZE) {
error_report("could not load PowerPC bios '%s'", bios_name);
exit(1);
}
if (linux_boot) {
uint64_t lowaddr = 0;
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_base = KERNEL_LOAD_ADDR;
kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
NULL, &lowaddr, NULL, 1, PPC_ELF_MACHINE,
0, 0);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, kernel_base,
ram_size - kernel_base, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
error_report("could not load initial ram disk '%s'",
initrd_filename);
exit(1);
}
cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
} else {
initrd_base = 0;
initrd_size = 0;
cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
/* We consider that NewWorld PowerMac never have any floppy drive
* For now, OHW cannot boot from the network.
*/
for (i = 0; boot_device[i] != '\0'; i++) {
if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
}
if (ppc_boot_device == '\0') {
error_report("No valid boot device for Mac99 machine");
exit(1);
}
}
/* Register 8 MB of ISA IO space */
memory_region_init_alias(isa, NULL, "isa_mmio",
get_system_io(), 0, 0x00800000);
memory_region_add_subregion(get_system_memory(), 0xf2000000, isa);
/* UniN init: XXX should be a real device */
memory_region_init_io(unin_memory, NULL, &unin_ops, token, "unin", 0x1000);
memory_region_add_subregion(get_system_memory(), 0xf8000000, unin_memory);
memory_region_init_io(unin2_memory, NULL, &unin_ops, token, "unin", 0x1000);
memory_region_add_subregion(get_system_memory(), 0xf3000000, unin2_memory);
openpic_irqs = g_malloc0(smp_cpus * sizeof(qemu_irq *));
openpic_irqs[0] =
g_malloc0(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
for (i = 0; i < smp_cpus; i++) {
/* Mac99 IRQ connection between OpenPIC outputs pins
* and PowerPC input pins
*/
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
break;
#if defined(TARGET_PPC64)
case PPC_FLAGS_INPUT_970:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
break;
#endif /* defined(TARGET_PPC64) */
default:
error_report("Bus model not supported on mac99 machine");
exit(1);
}
}
pic = g_new0(qemu_irq, 64);
pic_dev = qdev_create(NULL, TYPE_OPENPIC);
qdev_prop_set_uint32(pic_dev, "model", OPENPIC_MODEL_KEYLARGO);
qdev_init_nofail(pic_dev);
s = SYS_BUS_DEVICE(pic_dev);
k = 0;
for (i = 0; i < smp_cpus; i++) {
for (j = 0; j < OPENPIC_OUTPUT_NB; j++) {
sysbus_connect_irq(s, k++, openpic_irqs[i][j]);
}
}
for (i = 0; i < 64; i++) {
pic[i] = qdev_get_gpio_in(pic_dev, i);
}
if (PPC_INPUT(env) == PPC_FLAGS_INPUT_970) {
/* 970 gets a U3 bus */
pci_bus = pci_pmac_u3_init(pic, get_system_memory(), get_system_io());
machine_arch = ARCH_MAC99_U3;
} else {
pci_bus = pci_pmac_init(pic, get_system_memory(), get_system_io());
machine_arch = ARCH_MAC99;
}
object_property_set_bool(OBJECT(pci_bus), true, "realized", &error_abort);
machine->usb |= defaults_enabled() && !machine->usb_disabled;
/* Timebase Frequency */
if (kvm_enabled()) {
tbfreq = kvmppc_get_tbfreq();
} else {
tbfreq = TBFREQ;
}
/* MacIO */
macio = NEWWORLD_MACIO(pci_create(pci_bus, -1, TYPE_NEWWORLD_MACIO));
dev = DEVICE(macio);
qdev_connect_gpio_out(dev, 0, pic[0x19]); /* CUDA */
qdev_connect_gpio_out(dev, 1, pic[0x24]); /* ESCC-B */
qdev_connect_gpio_out(dev, 2, pic[0x25]); /* ESCC-A */
qdev_connect_gpio_out(dev, 3, pic[0x0d]); /* IDE */
qdev_connect_gpio_out(dev, 4, pic[0x02]); /* IDE DMA */
qdev_connect_gpio_out(dev, 5, pic[0x0e]); /* IDE */
qdev_connect_gpio_out(dev, 6, pic[0x03]); /* IDE DMA */
qdev_prop_set_uint64(dev, "frequency", tbfreq);
object_property_set_link(OBJECT(macio), OBJECT(pic_dev), "pic",
&error_abort);
qdev_init_nofail(dev);
/* We only emulate 2 out of 3 IDE controllers for now */
ide_drive_get(hd, ARRAY_SIZE(hd));
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[0]"));
macio_ide_init_drives(macio_ide, hd);
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
"ide[1]"));
macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]);
dev = DEVICE(object_resolve_path_component(OBJECT(macio), "cuda"));
adb_bus = qdev_get_child_bus(dev, "adb.0");
dev = qdev_create(adb_bus, TYPE_ADB_KEYBOARD);
qdev_init_nofail(dev);
dev = qdev_create(adb_bus, TYPE_ADB_MOUSE);
qdev_init_nofail(dev);
if (machine->usb) {
pci_create_simple(pci_bus, -1, "pci-ohci");
/* U3 needs to use USB for input because Linux doesn't support via-cuda
on PPC64 */
if (machine_arch == ARCH_MAC99_U3) {
USBBus *usb_bus = usb_bus_find(-1);
usb_create_simple(usb_bus, "usb-kbd");
usb_create_simple(usb_bus, "usb-mouse");
}
}
pci_vga_init(pci_bus);
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8) {
graphic_depth = 15;
}
for (i = 0; i < nb_nics; i++) {
pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
}
/* The NewWorld NVRAM is not located in the MacIO device */
#ifdef CONFIG_KVM
if (kvm_enabled() && getpagesize() > 4096) {
/* We can't combine read-write and read-only in a single page, so
move the NVRAM out of ROM again for KVM */
nvram_addr = 0xFFE00000;
}
#endif
dev = qdev_create(NULL, TYPE_MACIO_NVRAM);
qdev_prop_set_uint32(dev, "size", 0x2000);
qdev_prop_set_uint32(dev, "it_shift", 1);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, nvram_addr);
nvr = MACIO_NVRAM(dev);
pmac_format_nvram_partition(nvr, 0x2000);
/* No PCI init: the BIOS will do it */
fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, machine_arch);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE, kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
if (kvm_enabled()) {
#ifdef CONFIG_KVM
uint8_t *hypercall;
hypercall = g_malloc(16);
kvmppc_get_hypercall(env, hypercall, 16);
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
#endif
}
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq);
/* Mac OS X requires a "known good" clock-frequency value; pass it one. */
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_NVRAM_ADDR, nvram_addr);
/* MacOS NDRV VGA driver */
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME);
if (filename) {
ndrv_size = get_image_size(filename);
if (ndrv_size != -1) {
ndrv_file = g_malloc(ndrv_size);
ndrv_size = load_image(filename, ndrv_file);
fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size);
}
g_free(filename);
}
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
