void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
msm_gpiomux_install(hs_uart_sw_configs, ARRAY_SIZE(hs_uart_sw_configs));
msm_gpiomux_sdc3_install();
msm_gpiomux_extovp_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via X5
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(gpio_func_sensor_configs, ARRAY_SIZE(gpio_func_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(gpio_func_i2c_configs, ARRAY_SIZE(gpio_func_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if(hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs));
printk(KERN_ERR "[Touch] synaptics msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
} else {
msm_gpiomux_install(msm_atmel_s540_configs, ARRAY_SIZE(msm_atmel_s540_configs));
printk(KERN_ERR "[Touch] atmel msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
}
// GPIO related function <<5.NFC>>
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
// GPIO related function <<6.LCD>>
msm_gpiomux_install(gpio_func_lcd_configs,
ARRAY_SIZE(gpio_func_lcd_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(gpio_func_battery_configs, ARRAY_SIZE(gpio_func_battery_configs));
// GPIO related function <<13.BT>>
msm_gpiomux_install(gpio_func_bt_configs, ARRAY_SIZE(gpio_func_bt_configs));
// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
// GPIO related function <<15.FM>>
msm_gpiomux_install(gpio_func_fm_configs, ARRAY_SIZE(gpio_func_fm_configs));
// GPIO related function <<16.WLC>>
msm_gpiomux_install(gpio_func_wlc_configs, ARRAY_SIZE(gpio_func_wlc_configs));
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<21.LOGIC>>
msm_gpiomux_install(gpio_func_logic_configs, ARRAY_SIZE(gpio_func_logic_configs));
#endif
#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [BT][[email protected]], 2013-05-13 */
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
/* LGE_CHANGE_E, [BT][[email protected]], 2013-05-13 */
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
#if 0//defined(CONFIG_TSPDRV)
msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif
msm_gpiomux_sdc3_install();
}
void __init msm_8974_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm_eth_configs, \
ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
#if !defined(CONFIG_BT_BCM4354)
msm_gpiomux_install(msm_blsp2_uart7_configs,
ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4354)
msm_gpiomux_btuart_install();
#endif
#if defined(CONFIG_WCNSS_CORE)
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
if (of_board_is_liquid())
msm_gpiomux_install_nowrite(ath_gpio_configs,
ARRAY_SIZE(ath_gpio_configs));
msm_gpiomux_install(msm8974_slimbus_config,
ARRAY_SIZE(msm8974_slimbus_config));
if (system_rev >= 4)
msm_gpiomux_install(es705_config, ARRAY_SIZE(es705_config));
msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(msm_sensor_configs_dragonboard, \
ARRAY_SIZE(msm_sensor_configs_dragonboard));
else
msm_gpiomux_install(msm_sensor_configs, \
ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(&sd_card_det, 1);
if (machine_is_apq8074() && (of_board_is_liquid() || \
of_board_is_dragonboard()))
msm_gpiomux_sdc3_install();
#if !defined(CONFIG_WCNSS_CORE)
msm_gpiomux_sdc3_install();
#endif
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_sdc4_install();
msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
if (system_rev < 4)
msm_gpiomux_install(msm_es705_config, ARRAY_SIZE(msm_es705_config));
#if !defined(CONFIG_TDMB)
msm_gpiomux_install(msm_hsic_hub_configs,
ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#ifdef CONFIG_GPIO_MC5587
msm_gpiomux_install(msm8974_gpioexpander_configs,
ARRAY_SIZE(msm8974_gpioexpander_configs));
#endif
msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#ifdef CONFIG_VIDEO_MHL_V2
msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#ifdef CONFIG_FB_MSM_MDSS_HDMI_MHL_SII8334
if (of_board_is_fluid())
msm_gpiomux_install(msm_mhl_configs,
ARRAY_SIZE(msm_mhl_configs));
#endif
if (of_board_is_liquid() ||
(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
else
msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
if (of_board_is_cdp())
msm_gpiomux_install(msm8974_sec_auxpcm_configs,
ARRAY_SIZE(msm8974_sec_auxpcm_configs));
else if (of_board_is_liquid() || of_board_is_fluid() ||
of_board_is_mtp())
msm_gpiomux_install(msm_epm_configs,
ARRAY_SIZE(msm_epm_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
#if !defined(CONFIG_BT_BCM4354)
if (of_board_is_rumi())
msm_gpiomux_install(msm_rumi_blsp_configs,
ARRAY_SIZE(msm_rumi_blsp_configs));
#endif
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(apq8074_dragonboard_ts_config,
ARRAY_SIZE(apq8074_dragonboard_ts_config));
msm_gpiomux_install(fuel_i2c_config,
ARRAY_SIZE(fuel_i2c_config));
#if defined(CONFIG_SENSORS_SSP)
msm_gpiomux_install(ssp_configs, ARRAY_SIZE(ssp_configs));
#endif
#ifdef CONFIG_SENSORS_VFS61XX
msm_gpiomux_install(msm8974_fingerprint_configs,
ARRAY_SIZE(msm8974_fingerprint_configs));
#endif
#if defined(CONFIG_NFC_PN547) || defined(CONFIG_BCM2079X_NFC_I2C)
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#endif
msm_gpiomux_install(msm_cis_spi_configs,
ARRAY_SIZE(msm_cis_spi_configs));
msm_gpiomux_install(msm_af_configs,
ARRAY_SIZE(msm_af_configs));
msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
//int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
// GPIO related function <<7.CAMERA>>
/* LGE_CHANGE_S, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
/* LGE_CHANGE_E, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs,
ARRAY_SIZE(gpio_func_flash_led_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
printk(KERN_ERR "[Touch] HW_REV_0 \n");
} else if (hw_rev == HW_REV_A) {
msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
printk(KERN_ERR "[Touch] HW_REV_A \n");
} else {
msm_gpiomux_install(msm_atmel_configs_rev_b, ARRAY_SIZE(msm_atmel_configs_rev_b));
printk(KERN_ERR "[Touch] HW_REV_B or above \n");
}
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
#if defined(CONFIG_TSPDRV)
msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
//--------------------------------------------
// MSM8X26 GPIO Confiuration via JAGUAR
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if (hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
printk(KERN_ERR "[Touch] HW_REV_0 configs \n");
} else {
msm_gpiomux_install(msm_synaptics_configs_rev_b, ARRAY_SIZE(msm_synaptics_configs_rev_b));
printk(KERN_ERR "[Touch] HW_REV_A.. configs \n");
}
// GPIO related function <<5.NFC>>
/* */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* */
// GPIO related function <<6.LCD>>
if (hw_rev <= HW_REV_A)
msm_gpiomux_install_nowrite(msm_lcd_configs_A,
ARRAY_SIZE(msm_lcd_configs_A));
else
msm_gpiomux_install_nowrite(msm_lcd_configs_B,
ARRAY_SIZE(msm_lcd_configs_B));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
msm_gpiomux_sdc3_install();
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* */
// GPIO related function <<14.WIFI>>
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
#else
if (hw_rev == HW_REV_0)
msm_gpiomux_install(wcnss_5wire_interface_zero,
ARRAY_SIZE(wcnss_5wire_interface_zero));
else
msm_gpiomux_install(wcnss_5wire_interface_A,
ARRAY_SIZE(wcnss_5wire_interface_A));
#endif
// GPIO related function <<15.FM>>
msm_gpiomux_install(msm_auxpcm_configs, ARRAY_SIZE(msm_auxpcm_configs));
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<21.LOGIC>>
logic_msm_gpiomux_install();
/* */
#if defined(CONFIG_LGE_BROADCAST_TDMB)
msm_gpiomux_install(msm8926_tdmb_configs, ARRAY_SIZE(msm8926_tdmb_configs));
#endif
/* */
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
#ifndef CONFIG_MACH_LGE
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
}
void __init msm_8974_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
pr_debug("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
socinfo_get_version());
if (socinfo_get_version() >= 0x20000)
msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm_eth_configs, \
ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(msm_blsp2_uart7_configs,
ARRAY_SIZE(msm_blsp2_uart7_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (of_board_is_liquid())
msm_gpiomux_install_nowrite(ath_gpio_configs,
ARRAY_SIZE(ath_gpio_configs));
msm_gpiomux_install(msm8974_slimbus_config,
ARRAY_SIZE(msm8974_slimbus_config));
msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
if (of_board_is_liquid())
msm_gpiomux_install(msm_touch_i2cmode_configs,
ARRAY_SIZE(msm_touch_i2cmode_configs));
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(msm_sensor_configs_dragonboard, \
ARRAY_SIZE(msm_sensor_configs_dragonboard));
else
msm_gpiomux_install(msm_sensor_configs, \
ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(&sd_card_det, 1);
if (machine_is_apq8074() && (of_board_is_liquid() || \
of_board_is_dragonboard()))
msm_gpiomux_sdc3_install();
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_sdc4_install();
msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
msm_gpiomux_install(msm_hsic_hub_configs,
ARRAY_SIZE(msm_hsic_hub_configs));
msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
if (of_board_is_fluid())
msm_gpiomux_install(msm_mhl_configs,
ARRAY_SIZE(msm_mhl_configs));
if (of_board_is_liquid() ||
(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
else
msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
if (of_board_is_cdp())
msm_gpiomux_install(msm8974_sec_auxpcm_configs,
ARRAY_SIZE(msm8974_sec_auxpcm_configs));
else if (of_board_is_liquid() || of_board_is_fluid() ||
of_board_is_mtp())
msm_gpiomux_install(msm_epm_configs,
ARRAY_SIZE(msm_epm_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
if (of_board_is_rumi())
msm_gpiomux_install(msm_rumi_blsp_configs,
ARRAY_SIZE(msm_rumi_blsp_configs));
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(apq8074_dragonboard_ts_config,
ARRAY_SIZE(apq8074_dragonboard_ts_config));
if ((socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_INTERPOSERV3)
&& of_board_is_cdp())
msm_gpiomux_install(apq8074_interposer_config,
ARRAY_SIZE(apq8074_interposer_config));
}
void __init msm_8974_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
socinfo_get_version());
if (socinfo_get_version() >= 0x20000)
msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm_eth_configs, \
ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
#ifdef CONFIG_MFD_MAX77888
msm_gpiomux_install(msm8974_muic_configs, ARRAY_SIZE(msm8974_muic_configs));
#endif
msm_gpiomux_install(msm_battery_configs, ARRAY_SIZE(msm_battery_configs));
#if !defined(CONFIG_MACH_LT03_LTE)
msm_gpiomux_install(msm_batteryotg_configs, ARRAY_SIZE(msm_batteryotg_configs));
#endif
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
msm_gpiomux_install(msm_blsp2_uart7_configs,
ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
msm_gpiomux_btuart_install();
msm_gpiomux_btwake_install();
#endif
if (of_board_is_liquid())
msm_gpiomux_install_nowrite(ath_gpio_configs,
ARRAY_SIZE(ath_gpio_configs));
msm_gpiomux_install(msm8974_slimbus_config,
ARRAY_SIZE(msm8974_slimbus_config));
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(msm_sensor_configs_dragonboard, \
ARRAY_SIZE(msm_sensor_configs_dragonboard));
else
msm_gpiomux_install(msm_sensor_configs, \
ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
msm_gpiomux_install(&sd_card_det, 1);
msm_gpiomux_sdc3_install();
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_sdc4_install();
msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));
#if defined(CONFIG_MACH_LT03_VZW) || defined(CONFIG_MACH_LT03_EUR) || defined(CONFIG_MACH_LT03_TMO) \
|| defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) || defined(CONFIG_MACH_LT03LGT)
msm_gpiomux_install(spk_ext_config, ARRAY_SIZE(spk_ext_config));
#endif
msm_gpiomux_install(msm_hsic_hub_configs,
ARRAY_SIZE(msm_hsic_hub_configs));
msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#ifdef CONFIG_VIDEO_MHL_V2
msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#if 0
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
if (of_board_is_liquid() ||
(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
else
msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */
#ifdef CONFIG_USB_SWITCH_FSA9485
if (system_rev >= 7)
msm_gpiomux_install(lt03_r04_muic_configs,
ARRAY_SIZE(lt03_r04_muic_configs));
else
msm_gpiomux_install(lt03_muic_configs,
ARRAY_SIZE(lt03_muic_configs));
#endif
if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
msm_gpiomux_install(msm8974_sec_auxpcm_configs,
ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
} else if (of_board_is_liquid() || of_board_is_fluid() ||
of_board_is_mtp())
msm_gpiomux_install(msm_epm_configs,
ARRAY_SIZE(msm_epm_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
if (of_board_is_rumi())
msm_gpiomux_install(msm_rumi_blsp_configs,
ARRAY_SIZE(msm_rumi_blsp_configs));
#endif
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(apq8074_dragonboard_ts_config,
ARRAY_SIZE(apq8074_dragonboard_ts_config));
#ifdef CONFIG_FB_MSM_EDP_SAMSUNG
msm_gpiomux_install(msm8974_lcd_config,
ARRAY_SIZE(msm8974_lcd_config));
#endif
#ifdef CONFIG_INPUT_WACOM
msm_gpiomux_install(msm8974_wacom_configs,
ARRAY_SIZE(msm8974_wacom_configs));
#endif
msm_gpiomux_install(msm_grip_configs, ARRAY_SIZE(msm_grip_configs));
msm_gpiomux_install(msm_sensors_configs, ARRAY_SIZE(msm_sensors_configs));
#if defined(CONFIG_MACH_LT03_VZW) || defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) || defined(CONFIG_MACH_LT03LGT)
msm_gpiomux_install(ext_buck_configs, ARRAY_SIZE(ext_buck_configs));
#endif
#if defined(CONFIG_MACH_LT03_LTE)
msm_gpiomux_install(gpio_nc_configs,ARRAY_SIZE(gpio_nc_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
//--------------------------------------------
// MSM8X26 GPIO Confiuration via JAGUAR
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
#if 0
for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
#endif
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if (hw_rev >= HW_REV_A) {
msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
printk(KERN_ERR "[Touch] HW_REV_A configs \n");
}
// GPIO related function <<5.NFC>>
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN544_C3
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
// GPIO related function <<6.LCD>>
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
msm_gpiomux_sdc3_install();
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
// GPIO related function <<14.WIFI>>
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
// GPIO related function <<15.FM>>
msm_gpiomux_install(msm_auxpcm_configs, ARRAY_SIZE(msm_auxpcm_configs));
// GPIO related function <<16.WLC>>
msm_gpiomux_install(&gpio_func_wlc_config, 1);
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<21.LOGIC>>
msm_gpiomux_install(ext_ldo_en_configs, ARRAY_SIZE(ext_ldo_en_configs));
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
#ifndef CONFIG_MACH_LGE
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
#ifdef CONFIG_SND_BRCM_FM_RADIO
msm_gpiomux_install(msm_pri_mi2s_configs, ARRAY_SIZE(msm_pri_mi2s_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
/* Battery charging and BMS GPIO */
msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
msm_gpiomux_install(msm_hrm_configs,
ARRAY_SIZE(msm_hrm_configs));
msm_gpiomux_install(msm_sensorhub_configs,
ARRAY_SIZE(msm_sensorhub_configs));
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
/*
* gpio mux settings for the NC GPIOs
*/
msm_gpiomux_install(nc_gpio_cfgs,
ARRAY_SIZE(nc_gpio_cfgs));
msm_gpiomux_install(hw_chkbits_cfg, ARRAY_SIZE(hw_chkbits_cfg));
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via W7 Rev 0
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.SIM>>
// GPIO related function <<17.SLIMBUS>>
// GPIO related function <<18.RF>>
// GPIO related function <<19.KEY PAD>>
// GPIO related function <<20.LOGIC>>
/* Moved to the last of this function */
#if 0
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ) {
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
case HW_REV_C :
case HW_REV_D :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
#endif // 0
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(gpio_func_sensor_configs,
ARRAY_SIZE(gpio_func_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs,
ARRAY_SIZE(msm_hall_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(gpio_func_i2c_configs,
ARRAY_SIZE(gpio_func_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs,
ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
printk(KERN_ERR " [Touch] HW_REV for Atmel Touch IC \n");
// GPIO related function <<5.NFC>>
/* */
#ifdef CONFIG_LGE_NFC_PN547
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* */
// GPIO related function <<6.LCD>>
//msm_gpiomux_install(msm_lcd_configs_rev_0, ARRAY_SIZE(msm_lcd_configs_rev_0));
//msm_gpiomux_install(msm_bl_configs_rev_0, ARRAY_SIZE(msm_bl_configs_rev_0));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs,
ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
msm_gpiomux_install(gpio_func_audio_configs,
ARRAY_SIZE(gpio_func_audio_configs));
// GPIO related function <<11.SD CARD>>
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(gpio_func_battery_configs,
ARRAY_SIZE(gpio_func_battery_configs));
// GPIO related function <<13.BT>>
msm_gpiomux_install(gpio_func_bt_configs,
ARRAY_SIZE(gpio_func_bt_configs));
// GPIO related function <<14.WIFI>>
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
// GPIO related function <<15.FM>>
msm_gpiomux_install(gpio_func_fm_configs,
ARRAY_SIZE(gpio_func_fm_configs));
// GPIO related function <<16.SIM>>
msm_gpiomux_install(gpio_func_sim_configs,
ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<17.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs,
ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<18.RF>>
msm_gpiomux_install(gpio_func_rf_configs,
ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<19.KEY PAD>>
if ( hw_rev >= HW_REV_A )
msm_gpiomux_install(msm_keypad_configs_rev_a,
ARRAY_SIZE(msm_keypad_configs_rev_a));
else
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<20.LOGIC>>
msm_gpiomux_install(gpio_func_logic_configs,
ARRAY_SIZE(gpio_func_logic_configs));
#endif
#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* Applied Rev_E board changes */
if( hw_rev >= HW_REV_E )
{
msm_gpiomux_install(pcb_indicator_configs, ARRAY_SIZE(pcb_indicator_configs));
msm_gpiomux_install(radiation_pwr_ant_configs, ARRAY_SIZE(radiation_pwr_ant_configs));
msm_gpiomux_install(vt_maker_id_configs, ARRAY_SIZE(vt_maker_id_configs));
}
/* Moved from the top of this function */
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ) {
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
case HW_REV_C :
case HW_REV_D :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
msm_gpiomux_install(muic_gpio_config, ARRAY_SIZE(muic_gpio_config));
msm_gpiomux_install(tkey_led_gpio_configs, ARRAY_SIZE(tkey_led_gpio_configs));
/* Cover ID */
msm_gpiomux_install(msm_cover_id_configs,
ARRAY_SIZE(msm_cover_id_configs));
msm_gpiomux_install(hw_chk_bit_configs, ARRAY_SIZE(hw_chk_bit_configs));
msm_gpiomux_install(tsp_id_configs, ARRAY_SIZE(tsp_id_configs));
#if defined(CONFIG_NFC_PN547)
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*
* gpio mux settings for the NC GPIOs
*/
msm_gpiomux_install(gpio_nc_configs,
ARRAY_SIZE(gpio_nc_configs));
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98505
msm_gpiomux_install(msm8226_max98504_i2c_configs,ARRAY_SIZE(msm8226_max98504_i2c_configs));
#endif
#ifdef CONFIG_LEDS_KTD2026
msm_gpiomux_install(msm_ktd2026_i2c_configs,ARRAY_SIZE(msm_ktd2026_i2c_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
msm_gpiomux_install(msm_melfas_configs,
ARRAY_SIZE(msm_melfas_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
#endif
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_DEGASLTE_COMMON)
msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
msm_gpiomux_install(irled_i2c_scl_config, ARRAY_SIZE(irled_i2c_scl_config));
#endif
msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
#endif
msm_gpiomux_sdc3_install();
msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
if(!poweroff_charging)
msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
#endif
#if defined (CONFIG_MACH_DEGASLTE_SPR) || defined(CONFIG_MACH_DEGASLTE_VZW) || defined(CONFIG_MACH_DEGASLTE_SBM)
msm_gpiomux_install(degaslte_spr_nc_gpios, ARRAY_SIZE(degaslte_spr_nc_gpios));
msm_gpiomux_install(degasltespr_gpio_10, ARRAY_SIZE(degasltespr_gpio_10));
#endif
#if defined(CONFIG_MACH_DEGASLTE_SBM)
msm_gpiomux_install(degaslte_sbm_gpios, ARRAY_SIZE(degaslte_sbm_gpios));
#endif
}
void __init msm_8974_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
socinfo_get_version());
if (socinfo_get_version() >= 0x20000)
msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm_eth_configs, \
ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
msm_gpiomux_install(msm_blsp2_uart7_configs,
ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
msm_gpiomux_btuart_install();
#endif
if (of_board_is_liquid())
msm_gpiomux_install_nowrite(ath_gpio_configs,
ARRAY_SIZE(ath_gpio_configs));
msm_gpiomux_install(msm8974_slimbus_config,
ARRAY_SIZE(msm8974_slimbus_config));
#ifdef CONFIG_SENSORS_GP2A_IIO_PROX
msm_gpiomux_install(msm_proximity_configs, ARRAY_SIZE(msm_proximity_configs));
#endif
msm_gpiomux_install(msm_mag_sensor_configs, ARRAY_SIZE(msm_mag_sensor_configs));
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(msm_sensor_configs_dragonboard, \
ARRAY_SIZE(msm_sensor_configs_dragonboard));
else
msm_gpiomux_install(msm_sensor_configs, \
ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(&sd_card_det, 1);
msm_gpiomux_install(msm_disp_configs, ARRAY_SIZE(msm_disp_configs));
if (machine_is_apq8074() && (of_board_is_liquid() || \
of_board_is_dragonboard()))
msm_gpiomux_sdc3_install();
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_sdc4_install();
msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
msm_gpiomux_install(tx_gtr_thres_enable_config, ARRAY_SIZE(tx_gtr_thres_enable_config));
msm_gpiomux_install(speaker_enable_config, ARRAY_SIZE(speaker_enable_config));
msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));
msm_gpiomux_install(msm_hsic_hub_configs,
ARRAY_SIZE(msm_hsic_hub_configs));
msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
if (of_board_is_liquid() ||
(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
else
msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
msm_gpiomux_install(msm8974_sec_auxpcm_configs,
ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
} else if (of_board_is_liquid() || of_board_is_fluid() ||
of_board_is_mtp())
msm_gpiomux_install(msm_epm_configs,
ARRAY_SIZE(msm_epm_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
if (of_board_is_rumi())
msm_gpiomux_install(msm_rumi_blsp_configs,
ARRAY_SIZE(msm_rumi_blsp_configs));
#endif
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(apq8074_dragonboard_ts_config,
ARRAY_SIZE(apq8074_dragonboard_ts_config));
msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via W7 Rev 0
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.SIM>>
// GPIO related function <<17.SLIMBUS>>
// GPIO related function <<18.RF>>
// GPIO related function <<19.KEY PAD>>
// GPIO related function <<20.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(gpio_func_sensor_configs,
ARRAY_SIZE(gpio_func_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs,
ARRAY_SIZE(msm_hall_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(gpio_func_i2c_configs,
ARRAY_SIZE(gpio_func_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs,
ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
if(hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs));
printk(KERN_ERR "[Touch] below HW_REV_0 is using Synaptics \n");
}
else if(hw_rev == HW_REV_A) {
msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
printk(KERN_ERR "[Touch] HW_REV_A configs \n");
}
else if(hw_rev == HW_REV_B){
msm_gpiomux_install(msm_melfas_configs_rev_b, ARRAY_SIZE(msm_melfas_configs_rev_b));
printk(KERN_ERR "[Touch] HW_REV_B configs \n");
}
else if(hw_rev < HW_REV_E){
msm_gpiomux_install(msm_melfas_configs_rev_c, ARRAY_SIZE(msm_melfas_configs_rev_c));
printk(KERN_ERR "[Touch] HW_REV_C configs \n");
}
else {
msm_gpiomux_install(msm_atmel_configs_rev_e, ARRAY_SIZE(msm_atmel_configs_rev_e));
printk(KERN_ERR " [Touch] HW_REV_E or above use Atmel \n");
}
// GPIO related function <<5.NFC>>
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
// GPIO related function <<6.LCD>>
msm_gpiomux_install(gpio_func_lcd_configs,
ARRAY_SIZE(gpio_func_lcd_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
// GPIO related function <<7.CAMERA>>
/* LGE_CHANGE_S, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
if(hw_rev == HW_REV_0) {
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
printk(KERN_ERR " [Camera] below HW_REV_0 is using power source from PM\n");
}
else if(hw_rev == HW_REV_A) {
msm_gpiomux_install(msm_sensor_configs_rev_a, ARRAY_SIZE(msm_sensor_configs_rev_a));
printk(KERN_ERR " [Camera] greater than HW_REV_A is using power source from Ex-LDO used GPIO\n");
}
else if(hw_rev == HW_REV_B) {
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
}
else {
msm_gpiomux_install(msm_sensor_configs_rev_c, ARRAY_SIZE(msm_sensor_configs_rev_c));
printk(KERN_ERR " [Camera] In greater than HW_REV_C, GPIO_110 is used for HI707\n");
}
/* LGE_CHANGE_E, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs,
ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
msm_gpiomux_install(gpio_func_audio_configs,
ARRAY_SIZE(gpio_func_audio_configs));
// GPIO related function <<11.SD CARD>>
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(gpio_func_battery_configs,
ARRAY_SIZE(gpio_func_battery_configs));
// GPIO related function <<13.BT>>
msm_gpiomux_install(gpio_func_bt_configs,
ARRAY_SIZE(gpio_func_bt_configs));
// GPIO related function <<14.WIFI>>
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
// GPIO related function <<15.FM>>
msm_gpiomux_install(gpio_func_fm_configs,
ARRAY_SIZE(gpio_func_fm_configs));
// GPIO related function <<16.SIM>>
msm_gpiomux_install(gpio_func_sim_configs,
ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<17.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs,
ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<18.RF>>
msm_gpiomux_install(gpio_func_rf_configs,
ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<19.KEY PAD>>
if ( hw_rev >= HW_REV_A )
msm_gpiomux_install(msm_keypad_configs_rev_a,
ARRAY_SIZE(msm_keypad_configs_rev_a));
else
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<20.LOGIC>>
msm_gpiomux_install(gpio_func_logic_configs,
ARRAY_SIZE(gpio_func_logic_configs));
#endif
#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* Applied Rev_E board changes */
if( hw_rev >= HW_REV_E )
{
msm_gpiomux_install(pcb_indicator_configs, ARRAY_SIZE(pcb_indicator_configs));
msm_gpiomux_install(radiation_pwr_ant_configs, ARRAY_SIZE(radiation_pwr_ant_configs));
msm_gpiomux_install(vt_maker_id_configs, ARRAY_SIZE(vt_maker_id_configs));
}
}
void __init msm8226_init_gpiomux(void)
{
int rc;
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
//--------------------------------------------
// MSM8X26 GPIO Confiuration via JAGUAR
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch (hw_rev) {
case HW_REV_0:
case HW_REV_A:
for (gpio_index = 0;
gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END;
gpio_index++) {
gpio_func_reserved_pin_config.gpio =
gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B :
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default:
break;
}
msm_gpiomux_install(wcnss_5wire_interface, ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
// GPIO related function <<5.NFC>>
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
// GPIO related function <<6.LCD>>
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
//msm_gpiomux_sdc3_install();
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
// GPIO related function <<15.FM>>
msm_gpiomux_install(msm_auxpcm_configs, ARRAY_SIZE(msm_auxpcm_configs));
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<18.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<19.RF>>
msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<20.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_pp2106_keypad_configs, ARRAY_SIZE(msm_pp2106_keypad_configs));
// GPIO related function <<21.LOGIC>>
logic_msm_gpiomux_install();
/* LGE_CHANGE_S, [TDMB][[email protected]], TDMB Bring Up */
#if defined(CONFIG_LGE_BROADCAST_TDMB)
msm_gpiomux_install(msm8926_tdmb_configs, ARRAY_SIZE(msm8926_tdmb_configs));
#endif
/* LGE_CHANGE_E, [TDMB][[email protected]], TDMB Bring Up */
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
#ifndef CONFIG_MACH_LGE
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
// Device Tree Initailize
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via W7 Rev 0
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.SIM>>
// GPIO related function <<17.SLIMBUS>>
// GPIO related function <<18.RF>>
// GPIO related function <<19.KEY PAD>>
// GPIO related function <<20.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch (hw_rev) {
case HW_REV_A:
for (gpio_index = 0; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END; gpio_index++) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_B:
default:
for (gpio_index = 0; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END; gpio_index++) {
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
// GPIO related function <<1.SENSOR>>
msm_gpiomux_install(gpio_func_sensor_configs,
ARRAY_SIZE(gpio_func_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs,
ARRAY_SIZE(msm_hall_ic_configs));
// GPIO related function <<2.I2C>>
msm_gpiomux_install(gpio_func_i2c_configs,
ARRAY_SIZE(gpio_func_i2c_configs));
// GPIO related function <<3.UART>>
msm_gpiomux_install(gpio_func_uart_configs,
ARRAY_SIZE(gpio_func_uart_configs));
// GPIO related function <<4.TOUCH>>
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
// GPIO related function <<5.NFC>>
/* */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* */
// GPIO related function <<6.LCD>>
msm_gpiomux_install(gpio_func_lcd_configs,
ARRAY_SIZE(gpio_func_lcd_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
// GPIO related function <<7.CAMERA>>
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs,
ARRAY_SIZE(gpio_func_flash_led_configs));
// GPIO related function <<10.AUDIO>>
msm_gpiomux_install(gpio_func_audio_configs,
ARRAY_SIZE(gpio_func_audio_configs));
// GPIO related function <<11.SD CARD>>
msm_gpiomux_install(&sd_card_det, 1);
// GPIO related function <<12.BATTERY>>
msm_gpiomux_install(gpio_func_battery_configs,
ARRAY_SIZE(gpio_func_battery_configs));
// GPIO related function <<13.BT>>
/*msm_gpiomux_install(gpio_func_bt_configs,
ARRAY_SIZE(gpio_func_bt_configs)); */
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
#endif /* */
// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
// GPIO related function <<15.FM>>
msm_gpiomux_install(gpio_func_fm_configs,
ARRAY_SIZE(gpio_func_fm_configs));
// GPIO related function <<16.SIM>>
msm_gpiomux_install(gpio_func_sim_configs,
ARRAY_SIZE(gpio_func_sim_configs));
// GPIO related function <<17.SLIMBUS>>
msm_gpiomux_install(gpio_func_slimbus_configs,
ARRAY_SIZE(gpio_func_slimbus_configs));
// GPIO related function <<18.RF>>
msm_gpiomux_install(gpio_func_rf_configs,
ARRAY_SIZE(gpio_func_rf_configs));
// GPIO related function <<19.KEY PAD>>
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
// GPIO related function <<20.LOGIC>>
msm_gpiomux_install(gpio_func_logic_configs,
ARRAY_SIZE(gpio_func_logic_configs));
#endif
#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
#if defined(CONFIG_TSPDRV)
msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif
msm_gpiomux_sdc3_install();
#ifdef CONFIG_SND_BRCM_FM_RADIO
msm_gpiomux_install(msm_pri_mi2s_configs, ARRAY_SIZE(msm_pri_mi2s_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT)
msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#endif
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_BERLUTI3G_EUR)
if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
if ( system_rev >= 0 && system_rev < 5)
#endif
{
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
}
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined (CONFIG_MACH_MILLETLTE_VZW)
msm_gpiomux_install(milletltevzw_gpio_10, ARRAY_SIZE(milletltevzw_gpio_10));
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_goodix_configs,
ARRAY_SIZE(msm_skuf_goodix_configs));
else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
msm_gpiomux_install(msm_cypress_configs,
ARRAY_SIZE(msm_cypress_configs));
msm_gpiomux_install(msm_keyboad_cypress_configs,
ARRAY_SIZE(msm_keyboad_cypress_configs));
#elif defined(CONFIG_SEC_MILLET_PROJECT)
msm_gpiomux_install(msm_melfas_configs,
ARRAY_SIZE(msm_melfas_configs));
#else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
#endif
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
#if !defined (CONFIG_SEC_MILLET_PROJECT)
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
#endif
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT)
msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
if ( system_rev >= 0 && system_rev < 3) {
msm_gpiomux_install(light_prox_config, ARRAY_SIZE(light_prox_config));
msm_gpiomux_install(irled_i2c_scl_config,
ARRAY_SIZE(irled_i2c_scl_config));
} else {
msm_gpiomux_install(nc_light_prox_config, ARRAY_SIZE(nc_light_prox_config));
#if defined (CONFIG_MACH_MILLETLTE_VZW) || defined(CONFIG_SEC_MILLETWIFI_COMMON)
msm_gpiomux_install(irled_i2c_scl_config,
ARRAY_SIZE(irled_i2c_scl_config));
#endif
}
#endif
msm_gpiomux_sdc3_install();
msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
#if defined (CONFIG_SEC_MILLETLTE_COMMON)
if ( system_rev >= 3)
{
msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
}
#else
msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
#endif
#if defined (CONFIG_SEC_MILLETWIFI_COMMON)
msm_gpiomux_install(milletwifi_nc_gpio_cfgs, ARRAY_SIZE(milletwifi_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_OPEN)
msm_gpiomux_install(millet_nc_gpio_cfgs, ARRAY_SIZE(millet_nc_gpio_cfgs));
if ( system_rev >= 3){
msm_gpiomux_install(millet_nc3_gpio_cfgs, ARRAY_SIZE(millet_nc3_gpio_cfgs));
}
#endif
#if defined (CONFIG_MACH_MILLET3G_EUR)
if ( system_rev >= 2)
msm_gpiomux_install(millet3g_nc_gpio_cfgs, ARRAY_SIZE(millet3g_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_VZW)
if ( system_rev >= 1)
msm_gpiomux_install(milletltevzw_nc_gpio_cfgs, ARRAY_SIZE(milletltevzw_nc_gpio_cfgs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
if(!poweroff_charging)
msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR)
if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
if ( system_rev >= 0 && system_rev < 5)
#endif
{
msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
}
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif /* CONFIG_MACH_LGE */
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
#ifdef CONFIG_MACH_LGE
switch ( hw_rev ){
case HW_REV_0 :
case HW_REV_A :
case HW_REV_A2 :
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
}
break;
case HW_REV_B2 :
case HW_REV_C :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
}
break;
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio)); /* MAIN_CAM_ID */
}
break;
}
if(hw_rev < HW_REV_A2) {
msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
printk(KERN_ERR "[Touch] HW_REV_A configs \n");
} else if(hw_rev == HW_REV_A2) {
#if defined(CONFIG_TOUCHSCREEN_LGE_TS_MISC)
msm_gpiomux_install(msm_touch_configs_rev_a2, ARRAY_SIZE(msm_touch_configs_rev_a2));
printk(KERN_ERR "[Touch] HW_REV_A2 configs \n");
#endif /* CONFIG_TOUCHSCREEN_LGE_TS_MISC */
} else if(hw_rev >= HW_REV_B) {
#if defined (CONFIG_LGE_TOUCHSCREEN_SYNAPTIC) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)
msm_gpiomux_install(msm_touch_configs_rev_b, ARRAY_SIZE(msm_touch_configs_rev_b));
if(hw_rev == HW_REV_B) {
printk(KERN_ERR "[Touch] HW_REV_B configs \n");
} else if (hw_rev >= HW_REV_B2) {
printk(KERN_ERR "[Touch] over HW_REV_B2 configs \n");
} else {}
#endif /* CONFIG_LGE_TOUCHSCREEN_SYNAPTIC || CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 */
} else {}
#endif /* CONFIG_MACH_LGE */
#if defined(CONFIG_BU52061NVX)
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#endif /* CONFIG_BU52061NVX */
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via X5
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.WLC>>
// GPIO related function <<17.SIM>>
// GPIO related function <<18.SLIMBUS>>
// GPIO related function <<19.RF>>
// GPIO related function <<20.KEY PAD>>
// GPIO related function <<21.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
case HW_REV_A :
case HW_REV_B :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (hw_rev <= HW_REV_B) {
msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
printk(KERN_ERR "[Touch] HW_REV_0, A, B configs \n");
} else if (hw_rev == HW_REV_C) {
msm_gpiomux_install(msm_melfas_configs_rev_c, ARRAY_SIZE(msm_melfas_configs_rev_c));
printk(KERN_ERR "[Touch] HW_REV_C configs \n");
} else {
msm_gpiomux_install(msm_atmel_configs_rev_d, ARRAY_SIZE(msm_atmel_configs_rev_d));
printk(KERN_ERR "[Touch] HW_REV_D or above use Atmel \n");
}
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN544_C3
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}
/* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up*/ #if defined(CONFIG_BU52061NVX) static struct msm_gpiomux_config msm_hall_ic_configs[] __initdata = { { .gpio = 4, .settings = { [GPIOMUX_ACTIVE] = &hall_ic_sus_cfg, }, }, #ifdef CONFIG_BU52033NVX_CARKIT { .gpio = 5, .settings = { [GPIOMUX_ACTIVE] = &hall_ic_sus_cfg, }, }, #endif }; #endif /* CONFIG_BU52061NVX */ void __init msm8226_init_gpiomux(void) { int rc; #ifdef CONFIG_MACH_LGE hw_rev_type hw_rev; hw_rev = lge_get_board_revno(); #endif /* CONFIG_MACH_LGE */ rc = msm_gpiomux_init_dt(); if (rc) { pr_err("%s failed %d\n", __func__, rc); return; } #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE) msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs)); #endif msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs)); msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs)); msm_gpiomux_install(wcnss_5wire_interface, ARRAY_SIZE(wcnss_5wire_interface)); msm_gpiomux_install(&sd_card_det, 1); #ifdef CONFIG_MACH_LGE if(hw_rev < HW_REV_A2) { msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs)); printk(KERN_ERR "[Touch] HW_REV_A configs \n"); } else if(hw_rev == HW_REV_A2) { #if defined(CONFIG_TOUCHSCREEN_LGE_TS_MISC) msm_gpiomux_install(msm_touch_configs_rev_a2, ARRAY_SIZE(msm_touch_configs_rev_a2)); printk(KERN_ERR "[Touch] HW_REV_A2 configs \n"); #endif /* CONFIG_TOUCHSCREEN_LGE_TS_MISC */ } else if(hw_rev >= HW_REV_B) { #if defined (CONFIG_LGE_TOUCHSCREEN_SYNAPTIC) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) msm_gpiomux_install(msm_touch_configs_rev_b, ARRAY_SIZE(msm_touch_configs_rev_b)); if(hw_rev == HW_REV_B) { printk(KERN_ERR "[Touch] HW_REV_B configs \n"); } else if (hw_rev >= HW_REV_B2) { printk(KERN_ERR "[Touch] over HW_REV_B2 configs \n"); } else {} #endif /* CONFIG_LGE_TOUCHSCREEN_SYNAPTIC || CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 */ } else {} #endif /* CONFIG_MACH_LGE */ #if defined(CONFIG_BU52061NVX) msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs)); #endif /* CONFIG_BU52061NVX */ msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs)); msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs)); #ifndef CONFIG_MACH_LGE msm_gpiomux_install(msm_auxpcm_configs, ARRAY_SIZE(msm_auxpcm_configs)); if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm()) msm_gpiomux_install(usb_otg_sw_configs, ARRAY_SIZE(usb_otg_sw_configs)); #endif /* LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */ #ifdef CONFIG_LGE_NFC_PN547 msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs)); #endif /* LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */ }
void __init msm8226_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_MS01_CHN_CTC) \
|| defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
msm_gpiomux_install(msm_hall_configs,
ARRAY_SIZE(msm_hall_configs));
#endif
if (of_board_is_qrd())
msm_gpiomux_install(msm_qrd_blsp_configs,
ARRAY_SIZE(msm_qrd_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MS01_CHN_CTC) \
|| defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
msm_gpiomux_install(msm8226_tx_gtr_configs,
ARRAY_SIZE(msm8226_tx_gtr_configs));
msm_gpiomux_install(muic_i2c_configs,
ARRAY_SIZE(muic_i2c_configs));
#endif
if (of_board_is_qrd())
msm_gpiomux_install(msm_qrd_goodix_configs,
ARRAY_SIZE(msm_qrd_goodix_configs));
else
#if defined(CONFIG_TOUCHSCREEN_ZINITIX_BT531)
msm_gpiomux_install(msm_zinitixs_configs,
ARRAY_SIZE(msm_zinitixs_configs));
#elif defined(CONFIG_TOUCHSCREEN_ATMEL_MXTS)
msm_gpiomux_install(msm_atmel_configs,
ARRAY_SIZE(msm_atmel_configs));
#elif defined(CONFIG_TOUCHSCREEN_MMS144)
msm_gpiomux_install(msm_melfas_configs,
ARRAY_SIZE(msm_melfas_configs));
#else
msm_gpiomux_install(msm_synaptics_configs,
ARRAY_SIZE(msm_synaptics_configs));
#endif
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
#if defined(CONFIG_FB_MSM_MDSS_SHARP_HD_PANEL)\
|| defined(CONFIG_MACH_MILLET3G_EUR)
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
#endif
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
/*
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
*/
#if defined(CONFIG_MACH_MILLET3G_EUR)
msm_gpiomux_install(msm_speaker_enable_gpio_configs, ARRAY_SIZE(msm_speaker_enable_gpio_configs));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#else
msm_gpiomux_install(msm_nc_configs,
ARRAY_SIZE(msm_nc_configs));
#endif
#if defined(CONFIG_YAS_ACC_DRIVER_BMA250) || defined(CONFIG_INPUT_MPU6500) || \
defined(CONFIG_PROXIMITY_SENSOR) || defined (CONFIG_SENSORS_HSCDTD008A)
msm_gpiomux_install(msm_sensors_configs,
ARRAY_SIZE(msm_sensors_configs));
#endif
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
msm_gpiomux_sdc3_install();
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
msm_gpiomux_install(an30259a_led_config,
ARRAY_SIZE(an30259a_led_config));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)||defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ)
msm_gpiomux_install(msm8226_nc_gpio_cfgs, ARRAY_SIZE(msm8226_nc_gpio_cfgs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#if defined(CONFIG_MACH_MS01_EUR_3G)
msm_gpiomux_install(ms01_nc_gpio_cfgs, ARRAY_SIZE(ms01_nc_gpio_cfgs));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
if ( system_rev >= 4 ) {
msm_gpiomux_install(ms01_ctc_nc_gpio_cfgs, ARRAY_SIZE(ms01_ctc_nc_gpio_cfgs));
}
#elif defined(CONFIG_MACH_CRATERQ)
msm_gpiomux_install(craterq_gpio_configs, ARRAY_SIZE(craterq_gpio_configs));
#endif
}
void __init msm_8974_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
socinfo_get_version());
if (socinfo_get_version() >= 0x20000)
msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm_eth_configs, \
ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
#ifdef CONFIG_MFD_MAX77888
#if 0 // MCU Pin
msm_gpiomux_install(msm8974_muic_configs, ARRAY_SIZE(msm8974_muic_configs));
#endif
#endif
#ifdef CONFIG_W1_SLAVE_DS28EL15
msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
#endif
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
msm_gpiomux_install(msm_blsp2_uart7_configs,
ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if 0//defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
msm_gpiomux_btuart_install();
#endif
if (of_board_is_liquid())
msm_gpiomux_install_nowrite(ath_gpio_configs,
ARRAY_SIZE(ath_gpio_configs));
msm_gpiomux_install(msm8974_slimbus_config,
ARRAY_SIZE(msm8974_slimbus_config));
msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));
#if 0//!defined(CONFIG_SENSORS_SSP)
msm_gpiomux_install(hap_lvl_shft_config,
ARRAY_SIZE(hap_lvl_shft_config));
#endif
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(msm_sensor_configs_dragonboard, \
ARRAY_SIZE(msm_sensor_configs_dragonboard));
else
msm_gpiomux_install(msm_sensor_configs, \
ARRAY_SIZE(msm_sensor_configs));
msm_gpiomux_install(&sd_card_det, 1);
msm_gpiomux_sdc3_install();
if (!(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_sdc4_install();
msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
msm_gpiomux_install(es325_config, ARRAY_SIZE(es325_config));
msm_gpiomux_install(msm8974_audio_configs, ARRAY_SIZE(msm8974_audio_configs));
msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
#if 0 // MCU pin
msm_gpiomux_install(msm_hsic_hub_configs,
ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
msm_gpiomux_install(ssp_configs,
ARRAY_SIZE(ssp_configs));
#endif
#if defined(CONFIG_SENSORS)
msm_gpiomux_install(msm_sensors_configs,
ARRAY_SIZE(msm_sensors_configs));
#endif
msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
if (system_rev > 5)
msm_gpiomux_install(msm_hdmi_ddc_configs,
ARRAY_SIZE(msm_hdmi_ddc_configs));
#ifdef CONFIG_VIDEO_MHL_V2
if(system_rev > 1)
msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#if 0
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_NFC_PN547)
msm_gpiomux_install(msm_nfc_configs,
ARRAY_SIZE(msm_nfc_configs));
#endif
if (of_board_is_liquid() ||
(of_board_is_dragonboard() && machine_is_apq8074()))
msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
else
msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */
#ifdef CONFIG_USB_SWITCH_FSA9485
if (system_rev >= 10)
msm_gpiomux_install(vienna_r10_muic_configs,
ARRAY_SIZE(vienna_r10_muic_configs));
else
msm_gpiomux_install(vienna_muic_configs,
ARRAY_SIZE(vienna_muic_configs));
#endif
if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
msm_gpiomux_install(msm8974_sec_auxpcm_configs,
ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
} else if (of_board_is_liquid() || of_board_is_fluid() ||
of_board_is_mtp())
msm_gpiomux_install(msm_epm_configs,
ARRAY_SIZE(msm_epm_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
if (of_board_is_rumi())
msm_gpiomux_install(msm_rumi_blsp_configs,
ARRAY_SIZE(msm_rumi_blsp_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
msm_gpiomux_install(an30259a_led_config,
ARRAY_SIZE(an30259a_led_config));
#endif
#ifdef CONFIG_INPUT_WACOM_HL
msm_gpiomux_install(msm8974_wacom_configs,
ARRAY_SIZE(msm8974_wacom_configs));
#endif
if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
msm_gpiomux_install(mdm_configs,
ARRAY_SIZE(mdm_configs));
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(apq8074_dragonboard_ts_config,
ARRAY_SIZE(apq8074_dragonboard_ts_config));
}
void __init msm8226_htc_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_slimbus_config,
ARRAY_SIZE(msm_slimbus_config));
msm_gpiomux_install(msm_aud_configs,
ARRAY_SIZE(msm_aud_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
#if 0
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
msm_gpiomux_sdc3_install();
msm_gpiomux_install(debug_uart_configs, ARRAY_SIZE(debug_uart_configs));
msm_gpiomux_install(ncgpio_configs, ARRAY_SIZE(ncgpio_configs));
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119;
msm_hsic_configs[1].gpio = 120;
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}
void __init msm8226_init_gpiomux(void)
{
int rc;
#ifdef CONFIG_MACH_LGE
int gpio_index = 0;
hw_rev_type hw_rev;
hw_rev = lge_get_board_revno();
#endif
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#ifdef CONFIG_MACH_LGE
//--------------------------------------------
// MSM8X26 GPIO Confiuration via G2M
//--------------------------------------------
// GPIO related function <<0.Resreved Pin>>
// GPIO related function <<1.SENSOR>>
// GPIO related function <<2.I2C>>
// GPIO related function <<3.UART>>
// GPIO related function <<4.TOUCH>>
// GPIO related function <<5.NFC>>
// GPIO related function <<6.LCD>>
// GPIO related function <<7.CAMERA>>
// GPIO related function <<8.FLASH LED>>
// GPIO related function <<9.IRRC>>
// GPIO related function <<10.AUDIO>>
// GPIO related function <<11.SD CARD>>
// GPIO related function <<12.BATTERY>>
// GPIO related function <<13.BT>>
// GPIO related function <<14.WIFI>>
// GPIO related function <<15.FM>>
// GPIO related function <<16.SIM>>
// GPIO related function <<17.SLIMBUS>>
// GPIO related function <<18.RF>>
// GPIO related function <<19.KEY PAD>>
// GPIO related function <<20.LOGIC>>
// GPIO related function <<0.Resreved Pin>>
switch ( hw_rev ){
case HW_REV_0 :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
case HW_REV_A :
case HW_REV_B :
case HW_REV_C :
case HW_REV_D :
case HW_REV_E :
case HW_REV_1_0 :
case HW_REV_1_1 :
default :
for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
}
break;
}
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
msm_gpiomux_install(msm_keypad_configs,
ARRAY_SIZE(msm_keypad_configs));
msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
// GPIO related function <<7.CAMERA>>
/* */
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
/* */
// GPIO related function <<8.FLASH LED>>
msm_gpiomux_install(gpio_func_flash_led_configs,
ARRAY_SIZE(gpio_func_flash_led_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if(hw_rev < HW_REV_A) {
msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
printk(KERN_ERR "[Touch] HW_REV_0 configs .\n");
}
else{
msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
printk(KERN_ERR "[Touch] Greater than HW_REV_0 .\n");
}
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
msm_gpiomux_install(msm_auxpcm_configs,
ARRAY_SIZE(msm_auxpcm_configs));
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* */
#ifdef CONFIG_LGE_NFC_PN547_C2
msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/* */
}
void __init msm8226_htc_init_gpiomux(void)
{
int rc;
rc = msm_gpiomux_init_dt();
if (rc) {
pr_err("%s failed %d\n", __func__, rc);
return;
}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
//htc audio ++
msm_gpiomux_install(msm_slimbus_config,
ARRAY_SIZE(msm_slimbus_config));
msm_gpiomux_install(msm_aud_configs,
ARRAY_SIZE(msm_aud_configs));
//htc audio --
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_blsp_configs,
ARRAY_SIZE(msm_skuf_blsp_configs));
else
msm_gpiomux_install(msm_blsp_configs,
ARRAY_SIZE(msm_blsp_configs));
msm_gpiomux_install(wcnss_5wire_interface,
ARRAY_SIZE(wcnss_5wire_interface));
msm_gpiomux_install(&sd_card_det, 1);
if (of_board_is_skuf())
msm_gpiomux_install(msm_skuf_nfc_configs,
ARRAY_SIZE(msm_skuf_nfc_configs));
msm_gpiomux_install_nowrite(msm_lcd_configs,
ARRAY_SIZE(msm_lcd_configs));
msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
if (of_board_is_skuf())
msm_gpiomux_install(msm_sensor_configs_skuf_plus,
ARRAY_SIZE(msm_sensor_configs_skuf_plus));
#if 0 /* it will make gpio low and fail to get batt_id */
if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
msm_gpiomux_install(usb_otg_sw_configs,
ARRAY_SIZE(usb_otg_sw_configs));
#endif
msm_gpiomux_sdc3_install();
msm_gpiomux_install(debug_uart_configs, ARRAY_SIZE(debug_uart_configs));
msm_gpiomux_install(ncgpio_configs, ARRAY_SIZE(ncgpio_configs));
/*
* HSIC STROBE gpio is also used by the ethernet. Install HSIC
* gpio mux config only when HSIC is enabled. HSIC config will
* be disabled when ethernet config is enabled.
*/
#ifdef CONFIG_USB_EHCI_MSM_HSIC
if (machine_is_msm8926()) {
msm_hsic_configs[0].gpio = 119; /* STROBE */
msm_hsic_configs[1].gpio = 120; /* DATA */
}
msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}