Пример #1
0
static irqreturn_t vfio_intx_handler(int irq, void *dev_id)
{
	struct vfio_pci_device *vdev = dev_id;
	unsigned long flags;
	int ret = IRQ_NONE;

	spin_lock_irqsave(&vdev->irqlock, flags);

	if (!vdev->pci_2_3) {
		disable_irq_nosync(vdev->pdev->irq);
		vdev->ctx[0].masked = true;
		ret = IRQ_HANDLED;
	} else if (!vdev->ctx[0].masked &&  /* may be shared */
		   pci_check_and_mask_intx(vdev->pdev)) {
		vdev->ctx[0].masked = true;
		ret = IRQ_HANDLED;
	}

	spin_unlock_irqrestore(&vdev->irqlock, flags);

	if (ret == IRQ_HANDLED)
		vfio_send_intx_eventfd(vdev, NULL);

	return ret;
}
Пример #2
0
/**
 * This is interrupt handler which will check if the interrupt is for the right device.
 * If yes, disable it here and will be enable later.
 */
static irqreturn_t
igbuio_pci_irqhandler(int irq, struct uio_info *info)
{
	struct rte_uio_pci_dev *udev = info->priv;

	/* Legacy mode need to mask in hardware */
	if (udev->mode == RTE_INTR_MODE_LEGACY &&
	    !pci_check_and_mask_intx(udev->pdev))
		return IRQ_NONE;

	/* Message signal mode, no share IRQ and automasked */
	return IRQ_HANDLED;
}
Пример #3
0
/**
 * This is interrupt handler which will check if the interrupt is for the right device.
 * If yes, disable it here and will be enable later.
 */
static irqreturn_t
igbuio_pci_irqhandler(int irq, void *dev_id)
{
	struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
	struct uio_info *info = &udev->info;

	/* Legacy mode need to mask in hardware */
	if (udev->mode == RTE_INTR_MODE_LEGACY &&
	    !pci_check_and_mask_intx(udev->pdev))
		return IRQ_NONE;

	uio_event_notify(info);

	/* Message signal mode, no share IRQ and automasked */
	return IRQ_HANDLED;
}
Пример #4
0
irqreturn_t irq_handler(int irq, void *dev_id)
{
    u16 value;
    uint8_t *csr;

#ifndef MSI_TEST
    if( !pci_check_and_mask_intx(pdev) )
    { return IRQ_NONE; }
#endif

    counter++;

    csr = (uint8_t*)&value;
    pci_read_config_word(pdev, PCI_COMMAND, &value);
    csr[1] = 1;
    pci_write_config_word(pdev, PCI_COMMAND, value);
    return IRQ_HANDLED;
}