int OgreDetourTileCache::rasterizeTileLayers(InputGeom* geom, const int tx, const int ty, const rcConfig& cfg, TileCacheData* tiles, const int maxTiles)
{
if (!geom || geom->isEmpty()) {
m_recast->m_pLog->logMessage("ERROR: buildTile: Input mesh is not specified.");
return 0;
}
if (!geom->getChunkyMesh()) {
m_recast->m_pLog->logMessage("ERROR: buildTile: Input mesh has no chunkyTriMesh built.");
return 0;
}
//TODO make these member variables?
FastLZCompressor comp;
RasterizationContext rc;
const float* verts = geom->getVerts();
const int nverts = geom->getVertCount();
// The chunky tri mesh in the inputgeom is a simple spatial subdivision structure that allows to
// process the vertices in the geometry relevant to this part of the tile.
// The chunky tri mesh is a grid of axis aligned boxes that store indices to the vertices in verts
// that are positioned in that box.
const rcChunkyTriMesh* chunkyMesh = geom->getChunkyMesh();
// Tile bounds.
const float tcs = m_tileSize * m_cellSize;
rcConfig tcfg;
memcpy(&tcfg, &m_cfg, sizeof(tcfg));
tcfg.bmin[0] = m_cfg.bmin[0] + tx*tcs;
tcfg.bmin[1] = m_cfg.bmin[1];
tcfg.bmin[2] = m_cfg.bmin[2] + ty*tcs;
tcfg.bmax[0] = m_cfg.bmin[0] + (tx+1)*tcs;
tcfg.bmax[1] = m_cfg.bmax[1];
tcfg.bmax[2] = m_cfg.bmin[2] + (ty+1)*tcs;
tcfg.bmin[0] -= tcfg.borderSize*tcfg.cs;
tcfg.bmin[2] -= tcfg.borderSize*tcfg.cs;
tcfg.bmax[0] += tcfg.borderSize*tcfg.cs;
tcfg.bmax[2] += tcfg.borderSize*tcfg.cs;
// This is part of the regular recast navmesh generation pipeline as in OgreRecast::NavMeshBuild()
// but only up till step 4 and slightly modified.
// Allocate voxel heightfield where we rasterize our input data to.
rc.solid = rcAllocHeightfield();
if (!rc.solid)
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Out of memory 'solid'.");
return 0;
}
if (!rcCreateHeightfield(m_ctx, *rc.solid, tcfg.width, tcfg.height, tcfg.bmin, tcfg.bmax, tcfg.cs, tcfg.ch))
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Could not create solid heightfield.");
return 0;
}
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// an array which can hold the max number of triangles you need to process.
rc.triareas = new unsigned char[chunkyMesh->maxTrisPerChunk];
if (!rc.triareas)
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Out of memory 'm_triareas' ("+Ogre::StringConverter::toString(chunkyMesh->maxTrisPerChunk)+").");
return 0;
}
float tbmin[2], tbmax[2];
tbmin[0] = tcfg.bmin[0];
tbmin[1] = tcfg.bmin[2];
tbmax[0] = tcfg.bmax[0];
tbmax[1] = tcfg.bmax[2];
int cid[512];// TODO: Make grow when returning too many items.
const int ncid = rcGetChunksOverlappingRect(chunkyMesh, tbmin, tbmax, cid, 512);
if (!ncid)
{
return 0; // empty
}
for (int i = 0; i < ncid; ++i)
{
const rcChunkyTriMeshNode& node = chunkyMesh->nodes[cid[i]];
const int* tris = &chunkyMesh->tris[node.i*3];
const int ntris = node.n;
memset(rc.triareas, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(m_ctx, tcfg.walkableSlopeAngle,
verts, nverts, tris, ntris, rc.triareas);
rcRasterizeTriangles(m_ctx, verts, nverts, tris, rc.triareas, ntris, *rc.solid, tcfg.walkableClimb);
}
// Once all geometry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLowHangingWalkableObstacles(m_ctx, tcfg.walkableClimb, *rc.solid);
rcFilterLedgeSpans(m_ctx, tcfg.walkableHeight, tcfg.walkableClimb, *rc.solid);
rcFilterWalkableLowHeightSpans(m_ctx, tcfg.walkableHeight, *rc.solid);
rc.chf = rcAllocCompactHeightfield();
if (!rc.chf)
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Out of memory 'chf'.");
return 0;
}
if (!rcBuildCompactHeightfield(m_ctx, tcfg.walkableHeight, tcfg.walkableClimb, *rc.solid, *rc.chf))
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Could not build compact data.");
return 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(m_ctx, tcfg.walkableRadius, *rc.chf))
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Could not erode.");
return 0;
}
// Mark areas of dynamically added convex polygons
const ConvexVolume* const* vols = geom->getConvexVolumes();
for (int i = 0; i < geom->getConvexVolumeCount(); ++i)
{
rcMarkConvexPolyArea(m_ctx, vols[i]->verts, vols[i]->nverts,
vols[i]->hmin, vols[i]->hmax,
(unsigned char)vols[i]->area, *rc.chf);
}
// Up till this part was more or less the same as OgreRecast::NavMeshBuild()
// The following part is specific for creating a 2D intermediary navmesh tile.
rc.lset = rcAllocHeightfieldLayerSet();
if (!rc.lset)
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Out of memory 'lset'.");
return 0;
}
if (!rcBuildHeightfieldLayers(m_ctx, *rc.chf, tcfg.borderSize, tcfg.walkableHeight, *rc.lset))
{
m_recast->m_pLog->logMessage("ERROR: buildNavigation: Could not build heightfield layers.");
return 0;
}
rc.ntiles = 0;
for (int i = 0; i < rcMin(rc.lset->nlayers, MAX_LAYERS); ++i)
{
TileCacheData* tile = &rc.tiles[rc.ntiles++];
const rcHeightfieldLayer* layer = &rc.lset->layers[i];
// Store header
dtTileCacheLayerHeader header;
header.magic = DT_TILECACHE_MAGIC;
header.version = DT_TILECACHE_VERSION;
// Tile layer location in the navmesh.
header.tx = tx;
header.ty = ty;
header.tlayer = i;
dtVcopy(header.bmin, layer->bmin);
dtVcopy(header.bmax, layer->bmax);
// Tile info.
header.width = (unsigned char)layer->width;
header.height = (unsigned char)layer->height;
header.minx = (unsigned char)layer->minx;
header.maxx = (unsigned char)layer->maxx;
header.miny = (unsigned char)layer->miny;
header.maxy = (unsigned char)layer->maxy;
header.hmin = (unsigned short)layer->hmin;
header.hmax = (unsigned short)layer->hmax;
dtStatus status = dtBuildTileCacheLayer(&comp, &header, layer->heights, layer->areas, layer->cons,
&tile->data, &tile->dataSize);
if (dtStatusFailed(status))
{
return 0;
}
}
// Transfer ownsership of tile data from build context to the caller.
int n = 0;
for (int i = 0; i < rcMin(rc.ntiles, maxTiles); ++i)
{
tiles[n++] = rc.tiles[i];
rc.tiles[i].data = 0;
rc.tiles[i].dataSize = 0;
}
return n;
}
static int rasterizeTileLayers(BuildContext* ctx, CMapMesh* geom,
const int tx, const int ty,
const rcConfig& cfg,
TileCacheData* tiles,
const int maxTiles)
{
if (!geom || !geom->GetChunkyMesh())
{
ctx->log(RC_LOG_ERROR, "buildTile: Input mesh is not specified.");
return 0;
}
FastLZCompressor comp;
RasterizationContext rc;
const float* verts = geom->GetVerts();
const int nverts = geom->GetNumVerts();
const rcChunkyTriMesh* chunkyMesh = geom->GetChunkyMesh();
// Tile bounds.
const float tcs = cfg.tileSize * cfg.cs;
rcConfig tcfg;
memcpy(&tcfg, &cfg, sizeof(tcfg));
tcfg.bmin[0] = cfg.bmin[0] + tx*tcs;
tcfg.bmin[1] = cfg.bmin[1];
tcfg.bmin[2] = cfg.bmin[2] + ty*tcs;
tcfg.bmax[0] = cfg.bmin[0] + (tx+1)*tcs;
tcfg.bmax[1] = cfg.bmax[1];
tcfg.bmax[2] = cfg.bmin[2] + (ty+1)*tcs;
tcfg.bmin[0] -= tcfg.borderSize*tcfg.cs;
tcfg.bmin[2] -= tcfg.borderSize*tcfg.cs;
tcfg.bmax[0] += tcfg.borderSize*tcfg.cs;
tcfg.bmax[2] += tcfg.borderSize*tcfg.cs;
// Allocate voxel heightfield where we rasterize our input data to.
rc.solid = rcAllocHeightfield();
if (!rc.solid)
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'solid'.");
return 0;
}
if (!rcCreateHeightfield(ctx, *rc.solid, tcfg.width, tcfg.height, tcfg.bmin, tcfg.bmax, tcfg.cs, tcfg.ch))
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create solid heightfield.");
return 0;
}
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
rc.triareas = new unsigned char[chunkyMesh->maxTrisPerChunk];
if (!rc.triareas)
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'm_triareas' (%d).", chunkyMesh->maxTrisPerChunk);
return 0;
}
float tbmin[2], tbmax[2];
tbmin[0] = tcfg.bmin[0];
tbmin[1] = tcfg.bmin[2];
tbmax[0] = tcfg.bmax[0];
tbmax[1] = tcfg.bmax[2];
int cid[512];// TODO: Make grow when returning too many items.
const int ncid = rcGetChunksOverlappingRect(chunkyMesh, tbmin, tbmax, cid, 512);
if (!ncid)
{
return 0; // empty
}
for (int i = 0; i < ncid; ++i)
{
const rcChunkyTriMeshNode& node = chunkyMesh->nodes[cid[i]];
const int* tris = &chunkyMesh->tris[node.i*3];
const int ntris = node.n;
memset(rc.triareas, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(ctx, tcfg.walkableSlopeAngle,
verts, nverts, tris, ntris, rc.triareas);
rcRasterizeTriangles(ctx, verts, nverts, tris, rc.triareas, ntris, *rc.solid, tcfg.walkableClimb);
}
// Once all geometry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLowHangingWalkableObstacles(ctx, tcfg.walkableClimb, *rc.solid);
rcFilterLedgeSpans(ctx, tcfg.walkableHeight, tcfg.walkableClimb, *rc.solid);
rcFilterWalkableLowHeightSpans(ctx, tcfg.walkableHeight, *rc.solid);
rc.chf = rcAllocCompactHeightfield();
if (!rc.chf)
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'chf'.");
return 0;
}
if (!rcBuildCompactHeightfield(ctx, tcfg.walkableHeight, tcfg.walkableClimb, *rc.solid, *rc.chf))
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build compact data.");
return 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(ctx, tcfg.walkableRadius, *rc.chf))
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not erode.");
return 0;
}
#if 0
// (Optional) Mark areas.
const ConvexVolume* vols = geom->getConvexVolumes();
for (int i = 0; i < geom->getConvexVolumeCount(); ++i)
{
rcMarkConvexPolyArea(ctx, vols[i].verts, vols[i].nverts,
vols[i].hmin, vols[i].hmax,
(unsigned char)vols[i].area, *rc.chf);
}
#endif // 0
rc.lset = rcAllocHeightfieldLayerSet();
if (!rc.lset)
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'lset'.");
return 0;
}
if (!rcBuildHeightfieldLayers(ctx, *rc.chf, tcfg.borderSize, tcfg.walkableHeight, *rc.lset))
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build heighfield layers.");
return 0;
}
rc.ntiles = 0;
for (int i = 0; i < rcMin(rc.lset->nlayers, MAX_LAYERS); ++i)
{
TileCacheData* tile = &rc.tiles[rc.ntiles++];
const rcHeightfieldLayer* layer = &rc.lset->layers[i];
// Store header
dtTileCacheLayerHeader header;
header.magic = DT_TILECACHE_MAGIC;
header.version = DT_TILECACHE_VERSION;
// Tile layer location in the navmesh.
header.tx = tx;
header.ty = ty;
header.tlayer = i;
dtVcopy(header.bmin, layer->bmin);
dtVcopy(header.bmax, layer->bmax);
// Tile info.
header.width = (unsigned char)layer->width;
header.height = (unsigned char)layer->height;
header.minx = (unsigned char)layer->minx;
header.maxx = (unsigned char)layer->maxx;
header.miny = (unsigned char)layer->miny;
header.maxy = (unsigned char)layer->maxy;
header.hmin = (unsigned short)layer->hmin;
header.hmax = (unsigned short)layer->hmax;
dtStatus status = dtBuildTileCacheLayer(&comp, &header, layer->heights, layer->areas, layer->cons,
&tile->data, &tile->dataSize);
if (dtStatusFailed(status))
{
return 0;
}
}
// Transfer ownsership of tile data from build context to the caller.
int n = 0;
for (int i = 0; i < rcMin(rc.ntiles, maxTiles); ++i)
{
tiles[n++] = rc.tiles[i];
rc.tiles[i].data = 0;
rc.tiles[i].dataSize = 0;
}
return n;
}
unsigned char* Sample_TileMesh::buildTileMesh(const int tx, const int ty, const float* bmin, const float* bmax, int& dataSize)
{
if (!m_geom || !m_geom->getMesh() || !m_geom->getChunkyMesh())
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Input mesh is not specified.");
return 0;
}
m_tileMemUsage = 0;
m_tileBuildTime = 0;
cleanup();
const float* verts = m_geom->getMesh()->getVerts();
const int nverts = m_geom->getMesh()->getVertCount();
const int ntris = m_geom->getMesh()->getTriCount();
const rcChunkyTriMesh* chunkyMesh = m_geom->getChunkyMesh();
// Init build configuration from GUI
memset(&m_cfg, 0, sizeof(m_cfg));
m_cfg.cs = m_cellSize;
m_cfg.ch = m_cellHeight;
m_cfg.walkableSlopeAngle = m_agentMaxSlope;
m_cfg.walkableHeight = (int)ceilf(m_agentHeight / m_cfg.ch);
m_cfg.walkableClimb = (int)floorf(m_agentMaxClimb / m_cfg.ch);
m_cfg.walkableRadius = (int)ceilf(m_agentRadius / m_cfg.cs);
m_cfg.maxEdgeLen = (int)(m_edgeMaxLen / m_cellSize);
m_cfg.maxSimplificationError = m_edgeMaxError;
m_cfg.minRegionArea = (int)rcSqr(m_regionMinSize); // Note: area = size*size
m_cfg.mergeRegionArea = (int)rcSqr(m_regionMergeSize); // Note: area = size*size
m_cfg.maxVertsPerPoly = (int)m_vertsPerPoly;
m_cfg.tileSize = (int)m_tileSize;
m_cfg.borderSize = m_cfg.walkableRadius + 3; // Reserve enough padding.
m_cfg.width = m_cfg.tileSize + m_cfg.borderSize*2;
m_cfg.height = m_cfg.tileSize + m_cfg.borderSize*2;
m_cfg.detailSampleDist = m_detailSampleDist < 0.9f ? 0 : m_cellSize * m_detailSampleDist;
m_cfg.detailSampleMaxError = m_cellHeight * m_detailSampleMaxError;
// Expand the heighfield bounding box by border size to find the extents of geometry we need to build this tile.
//
// This is done in order to make sure that the navmesh tiles connect correctly at the borders,
// and the obstacles close to the border work correctly with the dilation process.
// No polygons (or contours) will be created on the border area.
//
// IMPORTANT!
//
// :''''''''':
// : +-----+ :
// : | | :
// : | |<--- tile to build
// : | | :
// : +-----+ :<-- geometry needed
// :.........:
//
// You should use this bounding box to query your input geometry.
//
// For example if you build a navmesh for terrain, and want the navmesh tiles to match the terrain tile size
// you will need to pass in data from neighbour terrain tiles too! In a simple case, just pass in all the 8 neighbours,
// or use the bounding box below to only pass in a sliver of each of the 8 neighbours.
rcVcopy(m_cfg.bmin, bmin);
rcVcopy(m_cfg.bmax, bmax);
m_cfg.bmin[0] -= m_cfg.borderSize*m_cfg.cs;
m_cfg.bmin[2] -= m_cfg.borderSize*m_cfg.cs;
m_cfg.bmax[0] += m_cfg.borderSize*m_cfg.cs;
m_cfg.bmax[2] += m_cfg.borderSize*m_cfg.cs;
// Reset build times gathering.
m_ctx->resetTimers();
// Start the build process.
m_ctx->startTimer(RC_TIMER_TOTAL);
m_ctx->log(RC_LOG_PROGRESS, "Building navigation:");
m_ctx->log(RC_LOG_PROGRESS, " - %d x %d cells", m_cfg.width, m_cfg.height);
m_ctx->log(RC_LOG_PROGRESS, " - %.1fK verts, %.1fK tris", nverts/1000.0f, ntris/1000.0f);
// Allocate voxel heightfield where we rasterize our input data to.
m_solid = rcAllocHeightfield();
if (!m_solid)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'solid'.");
return 0;
}
if (!rcCreateHeightfield(m_ctx, *m_solid, m_cfg.width, m_cfg.height, m_cfg.bmin, m_cfg.bmax, m_cfg.cs, m_cfg.ch))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create solid heightfield.");
return 0;
}
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
m_triareas = new unsigned char[chunkyMesh->maxTrisPerChunk];
if (!m_triareas)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'm_triareas' (%d).", chunkyMesh->maxTrisPerChunk);
return 0;
}
float tbmin[2], tbmax[2];
tbmin[0] = m_cfg.bmin[0];
tbmin[1] = m_cfg.bmin[2];
tbmax[0] = m_cfg.bmax[0];
tbmax[1] = m_cfg.bmax[2];
int cid[512];// TODO: Make grow when returning too many items.
const int ncid = rcGetChunksOverlappingRect(chunkyMesh, tbmin, tbmax, cid, 512);
if (!ncid)
return 0;
m_tileTriCount = 0;
for (int i = 0; i < ncid; ++i)
{
const rcChunkyTriMeshNode& node = chunkyMesh->nodes[cid[i]];
const int* ctris = &chunkyMesh->tris[node.i*3];
const int nctris = node.n;
m_tileTriCount += nctris;
memset(m_triareas, 0, nctris*sizeof(unsigned char));
rcMarkWalkableTriangles(m_ctx, m_cfg.walkableSlopeAngle,
verts, nverts, ctris, nctris, m_triareas);
if (!rcRasterizeTriangles(m_ctx, verts, nverts, ctris, m_triareas, nctris, *m_solid, m_cfg.walkableClimb))
return 0;
}
if (!m_keepInterResults)
{
delete [] m_triareas;
m_triareas = 0;
}
// Once all geometry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
if (m_filterLowHangingObstacles)
rcFilterLowHangingWalkableObstacles(m_ctx, m_cfg.walkableClimb, *m_solid);
if (m_filterLedgeSpans)
rcFilterLedgeSpans(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid);
if (m_filterWalkableLowHeightSpans)
rcFilterWalkableLowHeightSpans(m_ctx, m_cfg.walkableHeight, *m_solid);
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
m_chf = rcAllocCompactHeightfield();
if (!m_chf)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'chf'.");
return 0;
}
if (!rcBuildCompactHeightfield(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build compact data.");
return 0;
}
if (!m_keepInterResults)
{
rcFreeHeightField(m_solid);
m_solid = 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(m_ctx, m_cfg.walkableRadius, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not erode.");
return 0;
}
// (Optional) Mark areas.
const ConvexVolume* vols = m_geom->getConvexVolumes();
for (int i = 0; i < m_geom->getConvexVolumeCount(); ++i)
rcMarkConvexPolyArea(m_ctx, vols[i].verts, vols[i].nverts, vols[i].hmin, vols[i].hmax, (unsigned char)vols[i].area, *m_chf);
// Partition the heightfield so that we can use simple algorithm later to triangulate the walkable areas.
// There are 3 martitioning methods, each with some pros and cons:
// 1) Watershed partitioning
// - the classic Recast partitioning
// - creates the nicest tessellation
// - usually slowest
// - partitions the heightfield into nice regions without holes or overlaps
// - the are some corner cases where this method creates produces holes and overlaps
// - holes may appear when a small obstacles is close to large open area (triangulation can handle this)
// - overlaps may occur if you have narrow spiral corridors (i.e stairs), this make triangulation to fail
// * generally the best choice if you precompute the nacmesh, use this if you have large open areas
// 2) Monotone partioning
// - fastest
// - partitions the heightfield into regions without holes and overlaps (guaranteed)
// - creates long thin polygons, which sometimes causes paths with detours
// * use this if you want fast navmesh generation
// 3) Layer partitoining
// - quite fast
// - partitions the heighfield into non-overlapping regions
// - relies on the triangulation code to cope with holes (thus slower than monotone partitioning)
// - produces better triangles than monotone partitioning
// - does not have the corner cases of watershed partitioning
// - can be slow and create a bit ugly tessellation (still better than monotone)
// if you have large open areas with small obstacles (not a problem if you use tiles)
// * good choice to use for tiled navmesh with medium and small sized tiles
if (m_partitionType == SAMPLE_PARTITION_WATERSHED)
{
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(m_ctx, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build distance field.");
return 0;
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(m_ctx, *m_chf, m_cfg.borderSize, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build watershed regions.");
return 0;
}
}
else if (m_partitionType == SAMPLE_PARTITION_MONOTONE)
{
// Partition the walkable surface into simple regions without holes.
// Monotone partitioning does not need distancefield.
if (!rcBuildRegionsMonotone(m_ctx, *m_chf, m_cfg.borderSize, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build monotone regions.");
return 0;
}
}
else // SAMPLE_PARTITION_LAYERS
{
// Partition the walkable surface into simple regions without holes.
if (!rcBuildLayerRegions(m_ctx, *m_chf, m_cfg.borderSize, m_cfg.minRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build layer regions.");
return 0;
}
}
// Create contours.
m_cset = rcAllocContourSet();
if (!m_cset)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'cset'.");
return 0;
}
if (!rcBuildContours(m_ctx, *m_chf, m_cfg.maxSimplificationError, m_cfg.maxEdgeLen, *m_cset))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create contours.");
return 0;
}
if (m_cset->nconts == 0)
{
return 0;
}
// Build polygon navmesh from the contours.
m_pmesh = rcAllocPolyMesh();
if (!m_pmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmesh'.");
return 0;
}
if (!rcBuildPolyMesh(m_ctx, *m_cset, m_cfg.maxVertsPerPoly, *m_pmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not triangulate contours.");
return 0;
}
// Build detail mesh.
m_dmesh = rcAllocPolyMeshDetail();
if (!m_dmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'dmesh'.");
return 0;
}
if (!rcBuildPolyMeshDetail(m_ctx, *m_pmesh, *m_chf,
m_cfg.detailSampleDist, m_cfg.detailSampleMaxError,
*m_dmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could build polymesh detail.");
return 0;
}
if (!m_keepInterResults)
{
rcFreeCompactHeightfield(m_chf);
m_chf = 0;
rcFreeContourSet(m_cset);
m_cset = 0;
}
unsigned char* navData = 0;
int navDataSize = 0;
if (m_cfg.maxVertsPerPoly <= DT_VERTS_PER_POLYGON)
{
if (m_pmesh->nverts >= 0xffff)
{
// The vertex indices are ushorts, and cannot point to more than 0xffff vertices.
m_ctx->log(RC_LOG_ERROR, "Too many vertices per tile %d (max: %d).", m_pmesh->nverts, 0xffff);
return 0;
}
// Update poly flags from areas.
for (int i = 0; i < m_pmesh->npolys; ++i)
{
if (m_pmesh->areas[i] == RC_WALKABLE_AREA)
m_pmesh->areas[i] = SAMPLE_POLYAREA_GROUND;
if (m_pmesh->areas[i] == SAMPLE_POLYAREA_GROUND ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_GRASS ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_ROAD)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_WATER)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_SWIM;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_DOOR)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK | SAMPLE_POLYFLAGS_DOOR;
}
}
dtNavMeshCreateParams params;
memset(¶ms, 0, sizeof(params));
params.verts = m_pmesh->verts;
params.vertCount = m_pmesh->nverts;
params.polys = m_pmesh->polys;
params.polyAreas = m_pmesh->areas;
params.polyFlags = m_pmesh->flags;
params.polyCount = m_pmesh->npolys;
params.nvp = m_pmesh->nvp;
params.detailMeshes = m_dmesh->meshes;
params.detailVerts = m_dmesh->verts;
params.detailVertsCount = m_dmesh->nverts;
params.detailTris = m_dmesh->tris;
params.detailTriCount = m_dmesh->ntris;
params.offMeshConVerts = m_geom->getOffMeshConnectionVerts();
params.offMeshConRad = m_geom->getOffMeshConnectionRads();
params.offMeshConDir = m_geom->getOffMeshConnectionDirs();
params.offMeshConAreas = m_geom->getOffMeshConnectionAreas();
params.offMeshConFlags = m_geom->getOffMeshConnectionFlags();
params.offMeshConUserID = m_geom->getOffMeshConnectionId();
params.offMeshConCount = m_geom->getOffMeshConnectionCount();
params.walkableHeight = m_agentHeight;
params.walkableRadius = m_agentRadius;
params.walkableClimb = m_agentMaxClimb;
params.tileX = tx;
params.tileY = ty;
params.tileLayer = 0;
rcVcopy(params.bmin, m_pmesh->bmin);
rcVcopy(params.bmax, m_pmesh->bmax);
params.cs = m_cfg.cs;
params.ch = m_cfg.ch;
params.buildBvTree = true;
if (!dtCreateNavMeshData(¶ms, &navData, &navDataSize))
{
m_ctx->log(RC_LOG_ERROR, "Could not build Detour navmesh.");
return 0;
}
}
m_tileMemUsage = navDataSize/1024.0f;
m_ctx->stopTimer(RC_TIMER_TOTAL);
// Show performance stats.
duLogBuildTimes(*m_ctx, m_ctx->getAccumulatedTime(RC_TIMER_TOTAL));
m_ctx->log(RC_LOG_PROGRESS, ">> Polymesh: %d vertices %d polygons", m_pmesh->nverts, m_pmesh->npolys);
m_tileBuildTime = m_ctx->getAccumulatedTime(RC_TIMER_TOTAL)/1000.0f;
dataSize = navDataSize;
return navData;
}
unsigned char* Sample_TileMesh::buildTileMesh(const int tx, const int ty, const float* bmin, const float* bmax, int& dataSize)
{
if (!m_geom || !m_geom->getMesh() || !m_geom->getChunkyMesh())
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Input mesh is not specified.");
return 0;
}
m_tileMemUsage = 0;
m_tileBuildTime = 0;
cleanup();
const float* verts = m_geom->getMesh()->getVerts();
const int nverts = m_geom->getMesh()->getVertCount();
const int ntris = m_geom->getMesh()->getTriCount();
const rcChunkyTriMesh* chunkyMesh = m_geom->getChunkyMesh();
// Init build configuration from GUI
memset(&m_cfg, 0, sizeof(m_cfg));
m_cfg.cs = m_cellSize;
m_cfg.ch = m_cellHeight;
m_cfg.walkableSlopeAngle = m_agentMaxSlope;
m_cfg.walkableHeight = (int)ceilf(m_agentHeight / m_cfg.ch);
m_cfg.walkableClimb = (int)floorf(m_agentMaxClimb / m_cfg.ch);
m_cfg.walkableRadius = (int)ceilf(m_agentRadius / m_cfg.cs);
m_cfg.maxEdgeLen = (int)(m_edgeMaxLen / m_cellSize);
m_cfg.maxSimplificationError = m_edgeMaxError;
m_cfg.minRegionArea = (int)rcSqr(m_regionMinSize); // Note: area = size*size
m_cfg.mergeRegionArea = (int)rcSqr(m_regionMergeSize); // Note: area = size*size
m_cfg.maxVertsPerPoly = (int)m_vertsPerPoly;
m_cfg.tileSize = (int)m_tileSize;
m_cfg.borderSize = m_cfg.walkableRadius + 3; // Reserve enough padding.
m_cfg.width = m_cfg.tileSize + m_cfg.borderSize*2;
m_cfg.height = m_cfg.tileSize + m_cfg.borderSize*2;
m_cfg.detailSampleDist = m_detailSampleDist < 0.9f ? 0 : m_cellSize * m_detailSampleDist;
m_cfg.detailSampleMaxError = m_cellHeight * m_detailSampleMaxError;
rcVcopy(m_cfg.bmin, bmin);
rcVcopy(m_cfg.bmax, bmax);
m_cfg.bmin[0] -= m_cfg.borderSize*m_cfg.cs;
m_cfg.bmin[2] -= m_cfg.borderSize*m_cfg.cs;
m_cfg.bmax[0] += m_cfg.borderSize*m_cfg.cs;
m_cfg.bmax[2] += m_cfg.borderSize*m_cfg.cs;
// Reset build times gathering.
m_ctx->resetTimers();
// Start the build process.
m_ctx->startTimer(RC_TIMER_TOTAL);
m_ctx->log(RC_LOG_PROGRESS, "Building navigation:");
m_ctx->log(RC_LOG_PROGRESS, " - %d x %d cells", m_cfg.width, m_cfg.height);
m_ctx->log(RC_LOG_PROGRESS, " - %.1fK verts, %.1fK tris", nverts/1000.0f, ntris/1000.0f);
// Allocate voxel heightfield where we rasterize our input data to.
m_solid = rcAllocHeightfield();
if (!m_solid)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'solid'.");
return 0;
}
if (!rcCreateHeightfield(m_ctx, *m_solid, m_cfg.width, m_cfg.height, m_cfg.bmin, m_cfg.bmax, m_cfg.cs, m_cfg.ch))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create solid heightfield.");
return 0;
}
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
m_triareas = new unsigned char[chunkyMesh->maxTrisPerChunk];
if (!m_triareas)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'm_triareas' (%d).", chunkyMesh->maxTrisPerChunk);
return 0;
}
float tbmin[2], tbmax[2];
tbmin[0] = m_cfg.bmin[0];
tbmin[1] = m_cfg.bmin[2];
tbmax[0] = m_cfg.bmax[0];
tbmax[1] = m_cfg.bmax[2];
int cid[512];// TODO: Make grow when returning too many items.
const int ncid = rcGetChunksOverlappingRect(chunkyMesh, tbmin, tbmax, cid, 512);
if (!ncid)
return 0;
m_tileTriCount = 0;
for (int i = 0; i < ncid; ++i)
{
const rcChunkyTriMeshNode& node = chunkyMesh->nodes[cid[i]];
const int* tris = &chunkyMesh->tris[node.i*3];
const int ntris = node.n;
m_tileTriCount += ntris;
memset(m_triareas, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(m_ctx, m_cfg.walkableSlopeAngle,
verts, nverts, tris, ntris, m_triareas);
rcRasterizeTriangles(m_ctx, verts, nverts, tris, m_triareas, ntris, *m_solid, m_cfg.walkableClimb);
}
if (!m_keepInterResults)
{
delete [] m_triareas;
m_triareas = 0;
}
// Once all geometry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLowHangingWalkableObstacles(m_ctx, m_cfg.walkableClimb, *m_solid);
rcFilterLedgeSpans(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid);
rcFilterWalkableLowHeightSpans(m_ctx, m_cfg.walkableHeight, *m_solid);
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
m_chf = rcAllocCompactHeightfield();
if (!m_chf)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'chf'.");
return 0;
}
if (!rcBuildCompactHeightfield(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build compact data.");
return 0;
}
if (!m_keepInterResults)
{
rcFreeHeightField(m_solid);
m_solid = 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(m_ctx, m_cfg.walkableRadius, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not erode.");
return false;
}
// (Optional) Mark areas.
const ConvexVolume* vols = m_geom->getConvexVolumes();
for (int i = 0; i < m_geom->getConvexVolumeCount(); ++i)
rcMarkConvexPolyArea(m_ctx, vols[i].verts, vols[i].nverts, vols[i].hmin, vols[i].hmax, (unsigned char)vols[i].area, *m_chf);
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(m_ctx, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build distance field.");
return 0;
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(m_ctx, *m_chf, m_cfg.borderSize, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build regions.");
return 0;
}
// Create contours.
m_cset = rcAllocContourSet();
if (!m_cset)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'cset'.");
return 0;
}
if (!rcBuildContours(m_ctx, *m_chf, m_cfg.maxSimplificationError, m_cfg.maxEdgeLen, *m_cset))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create contours.");
return 0;
}
if (m_cset->nconts == 0)
{
return 0;
}
// Build polygon navmesh from the contours.
m_pmesh = rcAllocPolyMesh();
if (!m_pmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmesh'.");
return 0;
}
if (!rcBuildPolyMesh(m_ctx, *m_cset, m_cfg.maxVertsPerPoly, *m_pmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not triangulate contours.");
return 0;
}
// Build detail mesh.
m_dmesh = rcAllocPolyMeshDetail();
if (!m_dmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'dmesh'.");
return 0;
}
if (!rcBuildPolyMeshDetail(m_ctx, *m_pmesh, *m_chf,
m_cfg.detailSampleDist, m_cfg.detailSampleMaxError,
*m_dmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could build polymesh detail.");
return 0;
}
if (!m_keepInterResults)
{
rcFreeCompactHeightfield(m_chf);
m_chf = 0;
rcFreeContourSet(m_cset);
m_cset = 0;
}
unsigned char* navData = 0;
int navDataSize = 0;
if (m_cfg.maxVertsPerPoly <= DT_VERTS_PER_POLYGON)
{
// Remove padding from the polymesh data. TODO: Remove this odditity.
for (int i = 0; i < m_pmesh->nverts; ++i)
{
unsigned short* v = &m_pmesh->verts[i*3];
v[0] -= (unsigned short)m_cfg.borderSize;
v[2] -= (unsigned short)m_cfg.borderSize;
}
if (m_pmesh->nverts >= 0xffff)
{
// The vertex indices are ushorts, and cannot point to more than 0xffff vertices.
m_ctx->log(RC_LOG_ERROR, "Too many vertices per tile %d (max: %d).", m_pmesh->nverts, 0xffff);
return false;
}
// Update poly flags from areas.
for (int i = 0; i < m_pmesh->npolys; ++i)
{
if (m_pmesh->areas[i] == RC_WALKABLE_AREA)
m_pmesh->areas[i] = SAMPLE_POLYAREA_GROUND;
if (m_pmesh->areas[i] == SAMPLE_POLYAREA_GROUND ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_GRASS ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_ROAD)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_WATER)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_SWIM;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_DOOR)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK | SAMPLE_POLYFLAGS_DOOR;
}
}
dtNavMeshCreateParams params;
memset(¶ms, 0, sizeof(params));
params.verts = m_pmesh->verts;
params.vertCount = m_pmesh->nverts;
params.polys = m_pmesh->polys;
params.polyAreas = m_pmesh->areas;
params.polyFlags = m_pmesh->flags;
params.polyCount = m_pmesh->npolys;
params.nvp = m_pmesh->nvp;
params.detailMeshes = m_dmesh->meshes;
params.detailVerts = m_dmesh->verts;
params.detailVertsCount = m_dmesh->nverts;
params.detailTris = m_dmesh->tris;
params.detailTriCount = m_dmesh->ntris;
params.offMeshConVerts = m_geom->getOffMeshConnectionVerts();
params.offMeshConRad = m_geom->getOffMeshConnectionRads();
params.offMeshConDir = m_geom->getOffMeshConnectionDirs();
params.offMeshConAreas = m_geom->getOffMeshConnectionAreas();
params.offMeshConFlags = m_geom->getOffMeshConnectionFlags();
params.offMeshConUserID = m_geom->getOffMeshConnectionId();
params.offMeshConCount = m_geom->getOffMeshConnectionCount();
params.walkableHeight = m_agentHeight;
params.walkableRadius = m_agentRadius;
params.walkableClimb = m_agentMaxClimb;
params.tileX = tx;
params.tileY = ty;
rcVcopy(params.bmin, bmin);
rcVcopy(params.bmax, bmax);
params.cs = m_cfg.cs;
params.ch = m_cfg.ch;
params.tileSize = m_cfg.tileSize;
if (!dtCreateNavMeshData(¶ms, &navData, &navDataSize))
{
m_ctx->log(RC_LOG_ERROR, "Could not build Detour navmesh.");
return 0;
}
// Restore padding so that the debug visualization is correct.
for (int i = 0; i < m_pmesh->nverts; ++i)
{
unsigned short* v = &m_pmesh->verts[i*3];
v[0] += (unsigned short)m_cfg.borderSize;
v[2] += (unsigned short)m_cfg.borderSize;
}
}
m_tileMemUsage = navDataSize/1024.0f;
m_ctx->stopTimer(RC_TIMER_TOTAL);
// Show performance stats.
duLogBuildTimes(*m_ctx, m_ctx->getAccumulatedTime(RC_TIMER_TOTAL));
m_ctx->log(RC_LOG_PROGRESS, ">> Polymesh: %d vertices %d polygons", m_pmesh->nverts, m_pmesh->npolys);
m_tileBuildTime = m_ctx->getAccumulatedTime(RC_TIMER_TOTAL)/1000.0f;
dataSize = navDataSize;
return navData;
}
bool Sample_SoloMesh::handleBuild()
{
if (!m_geom || !m_geom->getMesh())
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Input mesh is not specified.");
return false;
}
cleanup();
const float* bmin = m_geom->getMeshBoundsMin();
const float* bmax = m_geom->getMeshBoundsMax();
const float* verts = m_geom->getMesh()->getVerts();
const int nverts = m_geom->getMesh()->getVertCount();
const int* tris = m_geom->getMesh()->getTris();
const int ntris = m_geom->getMesh()->getTriCount();
//
// Step 1. Initialize build config.
//
// Init build configuration from GUI
memset(&m_cfg, 0, sizeof(m_cfg));
m_cfg.cs = m_cellSize;
m_cfg.ch = m_cellHeight;
m_cfg.walkableSlopeAngle = m_agentMaxSlope;
m_cfg.walkableHeight = (int)ceilf(m_agentHeight / m_cfg.ch);
m_cfg.walkableClimb = (int)floorf(m_agentMaxClimb / m_cfg.ch);
m_cfg.walkableRadius = (int)ceilf(m_agentRadius / m_cfg.cs);
m_cfg.maxEdgeLen = (int)(m_edgeMaxLen / m_cellSize);
m_cfg.maxSimplificationError = m_edgeMaxError;
m_cfg.minRegionArea = (int)rcSqr(m_regionMinSize); // Note: area = size*size
m_cfg.mergeRegionArea = (int)rcSqr(m_regionMergeSize); // Note: area = size*size
m_cfg.maxVertsPerPoly = (int)m_vertsPerPoly;
m_cfg.detailSampleDist = m_detailSampleDist < 0.9f ? 0 : m_cellSize * m_detailSampleDist;
m_cfg.detailSampleMaxError = m_cellHeight * m_detailSampleMaxError;
// Set the area where the navigation will be build.
// Here the bounds of the input mesh are used, but the
// area could be specified by an user defined box, etc.
rcVcopy(m_cfg.bmin, bmin);
rcVcopy(m_cfg.bmax, bmax);
rcCalcGridSize(m_cfg.bmin, m_cfg.bmax, m_cfg.cs, &m_cfg.width, &m_cfg.height);
// Reset build times gathering.
m_ctx->resetTimers();
// Start the build process.
m_ctx->startTimer(RC_TIMER_TOTAL);
m_ctx->log(RC_LOG_PROGRESS, "Building navigation:");
m_ctx->log(RC_LOG_PROGRESS, " - %d x %d cells", m_cfg.width, m_cfg.height);
m_ctx->log(RC_LOG_PROGRESS, " - %.1fK verts, %.1fK tris", nverts/1000.0f, ntris/1000.0f);
//
// Step 2. Rasterize input polygon soup.
//
// Allocate voxel heightfield where we rasterize our input data to.
m_solid = rcAllocHeightfield();
if (!m_solid)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'solid'.");
return false;
}
if (!rcCreateHeightfield(m_ctx, *m_solid, m_cfg.width, m_cfg.height, m_cfg.bmin, m_cfg.bmax, m_cfg.cs, m_cfg.ch))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create solid heightfield.");
return false;
}
// Allocate array that can hold triangle area types.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
m_triareas = new unsigned char[ntris];
if (!m_triareas)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'm_triareas' (%d).", ntris);
return false;
}
// Find triangles which are walkable based on their slope and rasterize them.
// If your input data is multiple meshes, you can transform them here, calculate
// the are type for each of the meshes and rasterize them.
memset(m_triareas, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(m_ctx, m_cfg.walkableSlopeAngle, verts, nverts, tris, ntris, m_triareas);
rcRasterizeTriangles(m_ctx, verts, nverts, tris, m_triareas, ntris, *m_solid, m_cfg.walkableClimb);
if (!m_keepInterResults)
{
delete [] m_triareas;
m_triareas = 0;
}
//
// Step 3. Filter walkables surfaces.
//
// Once all geoemtry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLowHangingWalkableObstacles(m_ctx, m_cfg.walkableClimb, *m_solid);
rcFilterLedgeSpans(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid);
rcFilterWalkableLowHeightSpans(m_ctx, m_cfg.walkableHeight, *m_solid);
//
// Step 4. Partition walkable surface to simple regions.
//
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
m_chf = rcAllocCompactHeightfield();
if (!m_chf)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'chf'.");
return false;
}
if (!rcBuildCompactHeightfield(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build compact data.");
return false;
}
if (!m_keepInterResults)
{
rcFreeHeightField(m_solid);
m_solid = 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(m_ctx, m_cfg.walkableRadius, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not erode.");
return false;
}
// (Optional) Mark areas.
const ConvexVolume* vols = m_geom->getConvexVolumes();
for (int i = 0; i < m_geom->getConvexVolumeCount(); ++i)
rcMarkConvexPolyArea(m_ctx, vols[i].verts, vols[i].nverts, vols[i].hmin, vols[i].hmax, (unsigned char)vols[i].area, *m_chf);
// Partition the heightfield so that we can use simple algorithm later to triangulate the walkable areas.
// There are 3 martitioning methods, each with some pros and cons:
// 1) Watershed partitioning
// - the classic Recast partitioning
// - creates the nicest tessellation
// - usually slowest
// - partitions the heightfield into nice regions without holes or overlaps
// - the are some corner cases where this method creates produces holes and overlaps
// - holes may appear when a small obstacles is close to large open area (triangulation can handle this)
// - overlaps may occur if you have narrow spiral corridors (i.e stairs), this make triangulation to fail
// * generally the best choice if you precompute the nacmesh, use this if you have large open areas
// 2) Monotone partioning
// - fastest
// - partitions the heightfield into regions without holes and overlaps (guaranteed)
// - creates long thin polygons, which sometimes causes paths with detours
// * use this if you want fast navmesh generation
// 3) Layer partitoining
// - quite fast
// - partitions the heighfield into non-overlapping regions
// - relies on the triangulation code to cope with holes (thus slower than monotone partitioning)
// - produces better triangles than monotone partitioning
// - does not have the corner cases of watershed partitioning
// - can be slow and create a bit ugly tessellation (still better than monotone)
// if you have large open areas with small obstacles (not a problem if you use tiles)
// * good choice to use for tiled navmesh with medium and small sized tiles
if (m_partitionType == SAMPLE_PARTITION_WATERSHED)
{
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(m_ctx, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build distance field.");
return false;
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(m_ctx, *m_chf, 0, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build watershed regions.");
return false;
}
}
else if (m_partitionType == SAMPLE_PARTITION_MONOTONE)
{
// Partition the walkable surface into simple regions without holes.
// Monotone partitioning does not need distancefield.
if (!rcBuildRegionsMonotone(m_ctx, *m_chf, 0, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build monotone regions.");
return false;
}
}
else // SAMPLE_PARTITION_LAYERS
{
// Partition the walkable surface into simple regions without holes.
if (!rcBuildLayerRegions(m_ctx, *m_chf, 0, m_cfg.minRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build layer regions.");
return false;
}
}
//
// Step 5. Trace and simplify region contours.
//
// Create contours.
m_cset = rcAllocContourSet();
if (!m_cset)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'cset'.");
return false;
}
if (!rcBuildContours(m_ctx, *m_chf, m_cfg.maxSimplificationError, m_cfg.maxEdgeLen, *m_cset))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create contours.");
return false;
}
//
// Step 6. Build polygons mesh from contours.
//
// Build polygon navmesh from the contours.
m_pmesh = rcAllocPolyMesh();
if (!m_pmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmesh'.");
return false;
}
if (!rcBuildPolyMesh(m_ctx, *m_cset, m_cfg.maxVertsPerPoly, *m_pmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not triangulate contours.");
return false;
}
//
// Step 7. Create detail mesh which allows to access approximate height on each polygon.
//
m_dmesh = rcAllocPolyMeshDetail();
if (!m_dmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmdtl'.");
return false;
}
if (!rcBuildPolyMeshDetail(m_ctx, *m_pmesh, *m_chf, m_cfg.detailSampleDist, m_cfg.detailSampleMaxError, *m_dmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build detail mesh.");
return false;
}
if (!m_keepInterResults)
{
rcFreeCompactHeightfield(m_chf);
m_chf = 0;
rcFreeContourSet(m_cset);
m_cset = 0;
}
// At this point the navigation mesh data is ready, you can access it from m_pmesh.
// See duDebugDrawPolyMesh or dtCreateNavMeshData as examples how to access the data.
//
// (Optional) Step 8. Create Detour data from Recast poly mesh.
//
// The GUI may allow more max points per polygon than Detour can handle.
// Only build the detour navmesh if we do not exceed the limit.
if (m_cfg.maxVertsPerPoly <= DT_VERTS_PER_POLYGON)
{
unsigned char* navData = 0;
int navDataSize = 0;
// Update poly flags from areas.
for (int i = 0; i < m_pmesh->npolys; ++i)
{
if (m_pmesh->areas[i] == RC_WALKABLE_AREA)
m_pmesh->areas[i] = SAMPLE_POLYAREA_GROUND;
if (m_pmesh->areas[i] == SAMPLE_POLYAREA_GROUND ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_GRASS ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_ROAD)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_WATER)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_SWIM;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_DOOR)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK | SAMPLE_POLYFLAGS_DOOR;
}
}
dtNavMeshCreateParams params;
memset(¶ms, 0, sizeof(params));
params.verts = m_pmesh->verts;
params.vertCount = m_pmesh->nverts;
params.polys = m_pmesh->polys;
params.polyAreas = m_pmesh->areas;
params.polyFlags = m_pmesh->flags;
params.polyCount = m_pmesh->npolys;
params.nvp = m_pmesh->nvp;
params.detailMeshes = m_dmesh->meshes;
params.detailVerts = m_dmesh->verts;
params.detailVertsCount = m_dmesh->nverts;
params.detailTris = m_dmesh->tris;
params.detailTriCount = m_dmesh->ntris;
params.offMeshConVerts = m_geom->getOffMeshConnectionVerts();
params.offMeshConRad = m_geom->getOffMeshConnectionRads();
params.offMeshConDir = m_geom->getOffMeshConnectionDirs();
params.offMeshConAreas = m_geom->getOffMeshConnectionAreas();
params.offMeshConFlags = m_geom->getOffMeshConnectionFlags();
params.offMeshConUserID = m_geom->getOffMeshConnectionId();
params.offMeshConCount = m_geom->getOffMeshConnectionCount();
params.walkableHeight = m_agentHeight;
params.walkableRadius = m_agentRadius;
params.walkableClimb = m_agentMaxClimb;
rcVcopy(params.bmin, m_pmesh->bmin);
rcVcopy(params.bmax, m_pmesh->bmax);
params.cs = m_cfg.cs;
params.ch = m_cfg.ch;
params.buildBvTree = true;
if (!dtCreateNavMeshData(¶ms, &navData, &navDataSize))
{
m_ctx->log(RC_LOG_ERROR, "Could not build Detour navmesh.");
return false;
}
m_navMesh = dtAllocNavMesh();
if (!m_navMesh)
{
dtFree(navData);
m_ctx->log(RC_LOG_ERROR, "Could not create Detour navmesh");
return false;
}
dtStatus status;
status = m_navMesh->init(navData, navDataSize, DT_TILE_FREE_DATA);
if (dtStatusFailed(status))
{
dtFree(navData);
m_ctx->log(RC_LOG_ERROR, "Could not init Detour navmesh");
return false;
}
status = m_navQuery->init(m_navMesh, 2048);
if (dtStatusFailed(status))
{
m_ctx->log(RC_LOG_ERROR, "Could not init Detour navmesh query");
return false;
}
}
m_ctx->stopTimer(RC_TIMER_TOTAL);
// Show performance stats.
duLogBuildTimes(*m_ctx, m_ctx->getAccumulatedTime(RC_TIMER_TOTAL));
m_ctx->log(RC_LOG_PROGRESS, ">> Polymesh: %d vertices %d polygons", m_pmesh->nverts, m_pmesh->npolys);
m_totalBuildTimeMs = m_ctx->getAccumulatedTime(RC_TIMER_TOTAL)/1000.0f;
if (m_tool)
m_tool->init(this);
initToolStates(this);
return true;
}
bool NavMesher::Build()
{
// ******* Only for OBJ Loading ****
cleanup();
const char * filepath = "../../media/models/";
if (!m_geom || !m_geom->loadMesh(filepath))
{
delete m_geom;
m_geom = 0;
m_ctx->log(RC_LOG_ERROR, "Geom load log %s:");
}
assert(m_geom);
if (!m_geom || !m_geom->getMesh())
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Input mesh is not specified.");
return false;
}
if(m_geom->getMesh()->getTriCount() <= 0 || m_geom->getMesh()->getVertCount()<=0)
Ogre::Exception(0,Ogre::String("Bad verts or Triangle count. Verts: "+
StringConverter::toString( m_geom->getMesh()->getVertCount()) + "/n"
+ "Triangles :" +StringConverter::toString(m_geom->getMesh()->getTriCount())),"NavMesher::Build");
//reset timer
Ogre::Timer tm;
tm.reset();
unsigned long stime = tm.getMicroseconds();
//clear existing
Clear();
// ******* Only for OBJ Loading ****
const float* bmin = m_geom->getMeshBoundsMin();
const float* bmax = m_geom->getMeshBoundsMax();
const float* verts = m_geom->getMesh()->getVerts();
const int nverts = m_geom->getMesh()->getVertCount();
const int *tris = m_geom->getMesh()->getTris();
const int ntris = m_geom->getMesh()->getTriCount();
if(sizeof(tris) <= 0 || ntris <= 0) {
return false;
}
//
// Step 1. Initialize build config.
//
// Init build configuration from GUI
memset(&m_cfg, 0, sizeof(m_cfg));
m_cfg.cs = m_cellSize;
m_cfg.ch = m_cellHeight;
m_cfg.walkableSlopeAngle = m_agentMaxSlope;
m_cfg.walkableHeight = (int)ceilf(m_agentHeight / m_cfg.ch);
m_cfg.walkableClimb = (int)floorf(m_agentMaxClimb / m_cfg.ch);
m_cfg.walkableRadius = (int)ceilf(m_agentRadius / m_cfg.cs);
m_cfg.maxEdgeLen = (int)(m_edgeMaxLen / m_cellSize);
m_cfg.maxSimplificationError = m_edgeMaxError;
m_cfg.minRegionArea = (int)rcSqr(m_regionMinSize); // Note: area = size*size
m_cfg.mergeRegionArea = (int)rcSqr(m_regionMergeSize); // Note: area = size*size
m_cfg.maxVertsPerPoly = (int)m_vertsPerPoly;
m_cfg.detailSampleDist = m_detailSampleDist < 0.9f ? 0 : m_cellSize * m_detailSampleDist;
m_cfg.detailSampleMaxError = m_cellHeight * m_detailSampleMaxError;
// Set the area where the navigation will be build.
// Here the bounds of the input mesh are used, but the
// area could be specified by an user defined box, etc.
rcVcopy(m_cfg.bmin, bmin);
rcVcopy(m_cfg.bmax, bmax);
rcCalcGridSize(m_cfg.bmin, m_cfg.bmax, m_cfg.cs, &m_cfg.width, &m_cfg.height);
// Reset build times gathering.
m_ctx->resetTimers();
// Start the build process.
m_ctx->startTimer(RC_TIMER_TOTAL);
m_ctx->log(RC_LOG_PROGRESS, "Building navigation:");
m_ctx->log(RC_LOG_PROGRESS, " - %d x %d cells", m_cfg.width, m_cfg.height);
m_ctx->log(RC_LOG_PROGRESS, " - %.1fK verts, %.1fK tris", nverts/1000.0f, ntris/1000.0f);
//
// Step 2. Rasterize input polygon soup.
//
// Allocate voxel heightfield where we rasterize our input data to.
m_solid = rcAllocHeightfield();
if (!m_solid)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'solid'.");
return false;
}
if (!rcCreateHeightfield(m_ctx, *m_solid, m_cfg.width, m_cfg.height, m_cfg.bmin, m_cfg.bmax, m_cfg.cs, m_cfg.ch))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create solid heightfield.");
return false;
}
// Allocate array that can hold triangle area types.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
m_triareas = new unsigned char[ntris];
if (!m_triareas)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'm_triareas' (%d).", ntris);
return false;
}
// Find triangles which are walkable based on their slope and rasterize them.
// If your input data is multiple meshes, you can transform them here, calculate
// the are type for each of the meshes and rasterize them.
memset(m_triareas, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(m_ctx, m_cfg.walkableSlopeAngle, verts, nverts, tris, ntris, m_triareas);
rcRasterizeTriangles(m_ctx, verts, nverts, tris, m_triareas, ntris, *m_solid, m_cfg.walkableClimb);
if (!m_keepInterResults)
{
delete [] m_triareas;
m_triareas = 0;
}
//
// Step 3. Filter walkables surfaces.
//
// Once all geoemtry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLowHangingWalkableObstacles(m_ctx, m_cfg.walkableClimb, *m_solid);
rcFilterLedgeSpans(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid);
rcFilterWalkableLowHeightSpans(m_ctx, m_cfg.walkableHeight, *m_solid);
//
// Step 4. Partition walkable surface to simple regions.
//
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
m_chf = rcAllocCompactHeightfield();
if (!m_chf)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'chf'.");
return false;
}
if (!rcBuildCompactHeightfield(m_ctx, m_cfg.walkableHeight, m_cfg.walkableClimb, *m_solid, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build compact data.");
return false;
}
if (!m_keepInterResults)
{
rcFreeHeightField(m_solid);
m_solid = 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(m_ctx, m_cfg.walkableRadius, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not erode.");
return false;
}
// (Optional) Mark areas.
const ConvexVolume* vols = m_geom->getConvexVolumes();
for (int i = 0; i < m_geom->getConvexVolumeCount(); ++i)
rcMarkConvexPolyArea(m_ctx, vols[i].verts, vols[i].nverts, vols[i].hmin, vols[i].hmax, (unsigned char)vols[i].area, *m_chf);
if (m_monotonePartitioning)
{
// Partition the walkable surface into simple regions without holes.
// Monotone partitioning does not need distancefield.
if (!rcBuildRegionsMonotone(m_ctx, *m_chf, 0, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build regions.");
return false;
}
}
else
{
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(m_ctx, *m_chf))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build distance field.");
return false;
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(m_ctx, *m_chf, 0, m_cfg.minRegionArea, m_cfg.mergeRegionArea))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build regions.");
return false;
}
}
//
// Step 5. Trace and simplify region contours.
//
// Create contours.
m_cset = rcAllocContourSet();
if (!m_cset)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'cset'.");
return false;
}
if (!rcBuildContours(m_ctx, *m_chf, m_cfg.maxSimplificationError, m_cfg.maxEdgeLen, *m_cset))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create contours.");
return false;
}
//
// Step 6. Build polygons mesh from contours.
//
// Build polygon navmesh from the contours.
m_pmesh = rcAllocPolyMesh();
if (!m_pmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmesh'.");
return false;
}
if (!rcBuildPolyMesh(m_ctx, *m_cset, m_cfg.maxVertsPerPoly, *m_pmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not triangulate contours.");
return false;
}
//
// Step 7. Create detail mesh which allows to access approximate height on each polygon.
//
m_dmesh = rcAllocPolyMeshDetail();
if (!m_dmesh)
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmdtl'.");
return false;
}
if (!rcBuildPolyMeshDetail(m_ctx, *m_pmesh, *m_chf, m_cfg.detailSampleDist, m_cfg.detailSampleMaxError, *m_dmesh))
{
m_ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build detail mesh.");
return false;
}
if (!m_keepInterResults)
{
rcFreeCompactHeightfield(m_chf);
m_chf = 0;
rcFreeContourSet(m_cset);
m_cset = 0;
}
// At this point the navigation mesh data is ready, you can access it from m_pmesh.
// See rcDebugDrawPolyMesh or dtCreateNavMeshData as examples how to access the data.
//
// (Optional) Step 8. Create Detour data from Recast poly mesh.
//
// The GUI may allow more max points per polygon than Detour can handle.
// Only build the detour navmesh if we do not exceed the limit.
unsigned char* navData = 0;
int navDataSize = 0;
// Update poly flags from areas.
for (int i = 0; i < m_pmesh->npolys; ++i)
{
if (m_pmesh->areas[i] == RC_WALKABLE_AREA)
m_pmesh->areas[i] = SAMPLE_POLYAREA_GROUND;
if (m_pmesh->areas[i] == SAMPLE_POLYAREA_GROUND ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_GRASS ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_ROAD)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_WATER)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_SWIM;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_DOOR)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK | SAMPLE_POLYFLAGS_DOOR;
}
}
memset(&m_params, 0, sizeof(m_params));
m_params.verts = m_pmesh->verts;
m_params.vertCount = m_pmesh->nverts;
m_params.polys = m_pmesh->polys;
m_params.polyAreas = m_pmesh->areas;
m_params.polyFlags = m_pmesh->flags;
m_params.polyCount = m_pmesh->npolys;
m_params.nvp = m_pmesh->nvp;
m_params.detailMeshes = m_dmesh->meshes;
m_params.detailVerts = m_dmesh->verts;
m_params.detailVertsCount = m_dmesh->nverts;
m_params.detailTris = m_dmesh->tris;
m_params.detailTriCount = m_dmesh->ntris;
m_params.walkableHeight = m_agentHeight;
m_params.walkableRadius = m_agentRadius;
m_params.walkableClimb = m_agentMaxClimb;
rcVcopy(m_params.bmin, m_pmesh->bmin);
rcVcopy(m_params.bmax, m_pmesh->bmax);
m_params.cs = m_cfg.cs;
m_params.ch = m_cfg.ch;
m_params.buildBvTree = true;
if (!dtCreateNavMeshData(&m_params, &navData, &navDataSize)) {
m_ctx->log(RC_LOG_ERROR, "Could not build Detour navmesh.");
return false;
}
m_navMesh = dtAllocNavMesh();
if (!m_navMesh) {
delete [] navData;
m_ctx->log(RC_LOG_ERROR, "Could not create Detour navmesh");
return false;
}
m_navQuery = dtAllocNavMeshQuery();
dtStatus status = m_navQuery->init(m_navMesh, 2048);
if (dtStatusFailed(status)) {
m_ctx->log(RC_LOG_ERROR, "Could not init Detour navmesh query");
return false;
}
if (!m_navMesh->init(navData, navDataSize, true)) {
delete [] navData;
m_ctx->log(RC_LOG_ERROR, "Could not init Detour navmesh");
return false;
}
//take time
stime = tm.getMicroseconds() - stime;
DrawDebug();
return true;
}
PDT_NAV_MESH gkRecast::createNavMesh(PMESHDATA meshData, const Config& config)
{
if (!meshData.get())
return PDT_NAV_MESH(0);
rcConfig cfg;
cfg.cs = config.CELL_SIZE;
cfg.ch = config.CELL_HEIGHT;
GK_ASSERT(cfg.ch && "cfg.ch cannot be zero");
GK_ASSERT(cfg.ch && "cfg.ch cannot be zero");
cfg.walkableSlopeAngle = config.AGENT_MAX_SLOPE;
cfg.walkableHeight = (int)ceilf(config.AGENT_HEIGHT / cfg.ch);
cfg.walkableClimb = (int)ceilf(config.AGENT_MAX_CLIMB / cfg.ch);
cfg.walkableRadius = (int)ceilf(config.AGENT_RADIUS / cfg.cs);
cfg.maxEdgeLen = (int)(config.EDGE_MAX_LEN / cfg.cs);
cfg.maxSimplificationError = config.EDGE_MAX_ERROR;
cfg.minRegionSize = (int)rcSqr(config.REGION_MIN_SIZE);
cfg.mergeRegionSize = (int)rcSqr(config.REGION_MERGE_SIZE);
cfg.maxVertsPerPoly = gkMin(config.VERTS_PER_POLY, DT_VERTS_PER_POLYGON);
cfg.tileSize = config.TILE_SIZE;
cfg.borderSize = cfg.walkableRadius + 4; // Reserve enough padding.
cfg.detailSampleDist = config.DETAIL_SAMPLE_DIST < 0.9f ? 0 : cfg.cs * config.DETAIL_SAMPLE_DIST;
cfg.detailSampleMaxError = cfg.ch * config.DETAIL_SAMPLE_ERROR;
if (!meshData->getVertCount())
return PDT_NAV_MESH(0);
gkScalar bmin[3], bmax[3];
const gkScalar* verts = meshData->getVerts();
int nverts = meshData->getVertCount();
const int* tris = meshData->getTris();
const gkScalar* trinorms = meshData->getNormals();
int ntris = meshData->getTriCount();
rcCalcBounds(verts, nverts, bmin, bmax);
//
// Step 1. Initialize build config.
//
// Set the area where the navigation will be build.
// Here the bounds of the input mesh are used, but the
// area could be specified by an user defined box, etc.
rcVcopy(cfg.bmin, bmin);
rcVcopy(cfg.bmax, bmax);
rcCalcGridSize(cfg.bmin, cfg.bmax, cfg.cs, &cfg.width, &cfg.height);
rcBuildTimes m_buildTimes;
// Reset build times gathering.
memset(&m_buildTimes, 0, sizeof(m_buildTimes));
rcSetBuildTimes(&m_buildTimes);
// Start the build process.
rcTimeVal totStartTime = rcGetPerformanceTimer();
//gkPrintf("Building navigation:");
//gkPrintf(" - %d x %d cells", cfg.width, cfg.height);
//gkPrintf(" - %.1fK verts, %.1fK tris", nverts/1000.0f, ntris/1000.0f);
//
// Step 2. Rasterize input polygon soup.
//
// Allocate voxel heighfield where we rasterize our input data to.
rcHeightfield heightField;
if (!rcCreateHeightfield(heightField, cfg.width, cfg.height, cfg.bmin, cfg.bmax, cfg.cs, cfg.ch))
{
gkPrintf("buildNavigation: Could not create solid heightfield.");
return PDT_NAV_MESH(0);
}
{
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
utArray<unsigned char> triflags;
triflags.resize(ntris);
// Find triangles which are walkable based on their slope and rasterize them.
// If your input data is multiple meshes, you can transform them here, calculate
// the flags for each of the meshes and rasterize them.
memset(triflags.ptr(), 0, ntris * sizeof(unsigned char));
rcMarkWalkableTriangles(cfg.walkableSlopeAngle, verts, nverts, tris, ntris, triflags.ptr());
rcRasterizeTriangles(verts, nverts, tris, triflags.ptr(), ntris, heightField);
}
//
// Step 3. Filter walkables surfaces.
//
// Once all geoemtry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
rcFilterLedgeSpans(cfg.walkableHeight, cfg.walkableClimb, heightField);
rcFilterWalkableLowHeightSpans(cfg.walkableHeight, heightField);
//
// Step 4. Partition walkable surface to simple regions.
//
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
rcCompactHeightfield chf;
if (!rcBuildCompactHeightfield(cfg.walkableHeight, cfg.walkableClimb, RC_WALKABLE, heightField, chf))
{
gkPrintf("buildNavigation: Could not build compact data.");
return PDT_NAV_MESH(0);
}
// Erode the walkable area by agent radius.
if (!rcErodeArea(RC_WALKABLE_AREA, cfg.walkableRadius, chf))
{
gkPrintf("buildNavigation: Could not erode.");
return PDT_NAV_MESH(0);
}
//
// Mark areas from objects
//
gkScene* scene = gkEngine::getSingleton().getActiveScene();
gkGameObjectSet& objects = scene->getInstancedObjects();
gkGameObjectSet::Iterator it = objects.iterator();
while (it.hasMoreElements())
{
gkGameObject* obj = it.getNext();
if (!obj->getNavData().isEmpty())
{
size_t tBaseIndex = obj->getNavData().triangleBaseIndex;
size_t vBaseIndex = tBaseIndex / 2;
const float* v = verts + vBaseIndex;
const int nVerts = obj->getNavData().nIndex / 3;
const gkGameObjectProperties& prop = obj->getProperties();
rcMarkConvexPolyArea(v, nVerts, obj->getNavData().hmin, obj->getNavData().hmax, prop.m_findPathFlag, chf);
}
}
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(chf))
{
gkPrintf("buildNavigation: Could not build distance field.");
return PDT_NAV_MESH(0);
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(chf, cfg.borderSize, cfg.minRegionSize, cfg.mergeRegionSize))
{
gkPrintf("buildNavigation: Could not build regions.");
return PDT_NAV_MESH(0);
}
//
// Step 5. Trace and simplify region contours.
//
// Create contours.
rcContourSet cset;
if (!rcBuildContours(chf, cfg.maxSimplificationError, cfg.maxEdgeLen, cset))
{
gkPrintf("buildNavigation: Could not create contours.");
return PDT_NAV_MESH(0);
}
//
// Step 6. Build polygons mesh from contours.
//
// Build polygon navmesh from the contours.
rcPolyMesh pmesh;
if (!rcBuildPolyMesh(cset, cfg.maxVertsPerPoly, pmesh))
{
gkPrintf("buildNavigation: Could not triangulate contours.");
return PDT_NAV_MESH(0);
}
//
// Step 7. Create detail mesh which allows to access approximate height on each polygon.
//
rcPolyMeshDetail dmesh;
if (!rcBuildPolyMeshDetail(pmesh, chf, cfg.detailSampleDist, cfg.detailSampleMaxError, dmesh))
{
gkPrintf("buildNavigation: Could not build detail mesh.");
return PDT_NAV_MESH(0);
}
// At this point the navigation mesh data is ready, you can access it from pmesh.
// See rcDebugDrawPolyMesh or dtCreateNavMeshData as examples how to access the data.
//
// Step 8. Create Detour data from Recast poly mesh.
//
PDT_NAV_MESH navMesh;
// Update poly flags from areas.
for (int i = 0; i < pmesh.npolys; ++i)
pmesh.flags[i] = 0xFFFF & pmesh.areas[i];
dtNavMeshCreateParams params;
memset(¶ms, 0, sizeof(params));
params.verts = pmesh.verts;
params.vertCount = pmesh.nverts;
params.polys = pmesh.polys;
params.polyAreas = pmesh.areas;
params.polyFlags = pmesh.flags;
params.polyCount = pmesh.npolys;
params.nvp = pmesh.nvp;
params.detailMeshes = dmesh.meshes;
params.detailVerts = dmesh.verts;
params.detailVertsCount = dmesh.nverts;
params.detailTris = dmesh.tris;
params.detailTriCount = dmesh.ntris;
/* params.offMeshConVerts = m_geom->getOffMeshConnectionVerts();
params.offMeshConRad = m_geom->getOffMeshConnectionRads();
params.offMeshConDir = m_geom->getOffMeshConnectionDirs();
params.offMeshConAreas = m_geom->getOffMeshConnectionAreas();
params.offMeshConFlags = m_geom->getOffMeshConnectionFlags();
params.offMeshConCount = m_geom->getOffMeshConnectionCount();
*/
params.walkableHeight = cfg.walkableHeight * cfg.ch;
params.walkableRadius = cfg.walkableRadius * cfg.cs;;
params.walkableClimb = cfg.walkableClimb * cfg.ch;
rcVcopy(params.bmin, pmesh.bmin);
rcVcopy(params.bmax, pmesh.bmax);
params.cs = cfg.cs;
params.ch = cfg.ch;
unsigned char* navData = 0;
int navDataSize = 0;
if (!dtCreateNavMeshData(¶ms, &navData, &navDataSize))
{
gkPrintf("Could not build Detour navmesh.");
return PDT_NAV_MESH(0);
}
navMesh = PDT_NAV_MESH(new gkDetourNavMesh(new dtNavMesh));
if (!navMesh->m_p->init(navData, navDataSize, DT_TILE_FREE_DATA, 2048))
{
delete [] navData;
gkPrintf("Could not init Detour navmesh");
return PDT_NAV_MESH(0);
}
rcTimeVal totEndTime = rcGetPerformanceTimer();
gkPrintf("Navigation mesh created: %.1fms", rcGetDeltaTimeUsec(totStartTime, totEndTime) / 1000.0f);
return navMesh;
}
unsigned char* buildTileMesh(const int tx, const int ty,
const float* bmin, const float* bmax, int& dataSize,
InputGeom* geom,
rcConfig cfg,
rcContext* ctx)
{
const float* verts = geom->getMesh()->getVerts();
const int nverts = geom->getMesh()->getVertCount();
const int ntris = geom->getMesh()->getTriCount();
const rcChunkyTriMesh* chunkyMesh = geom->getChunkyMesh();
rcVcopy(cfg.bmin, bmin);
rcVcopy(cfg.bmax, bmax);
cfg.bmin[0] -= cfg.borderSize*cfg.cs;
cfg.bmin[2] -= cfg.borderSize*cfg.cs;
cfg.bmax[0] += cfg.borderSize*cfg.cs;
cfg.bmax[2] += cfg.borderSize*cfg.cs;
// Reset build times gathering.
ctx->resetTimers();
// Start the build process.
ctx->startTimer(RC_TIMER_TOTAL);
ctx->log(RC_LOG_PROGRESS, "Building navigation:");
ctx->log(RC_LOG_PROGRESS, " - %d x %d cells", cfg.width, cfg.height);
ctx->log(RC_LOG_PROGRESS, " - %.1fK verts, %.1fK tris", nverts/1000.0f, ntris/1000.0f);
// all involved objects
rcHeightfield* m_solid = 0;
unsigned char* m_triareas = 0;
rcCompactHeightfield* m_chf = 0;
rcContourSet* m_cset = 0;
rcPolyMesh* m_pmesh = 0;
rcPolyMeshDetail* m_dmesh = 0;
// Allocate voxel heightfield where we rasterize our input data to.
m_solid = rcAllocHeightfield();
if (!m_solid)
{
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'solid'.");
return 0;
}
if (!rcCreateHeightfield(ctx, *m_solid, cfg.width, cfg.height, cfg.bmin, cfg.bmax, cfg.cs, cfg.ch))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create solid heightfield.");
return 0;
}
// Allocate array that can hold triangle flags.
// If you have multiple meshes you need to process, allocate
// and array which can hold the max number of triangles you need to process.
m_triareas = new unsigned char[chunkyMesh->maxTrisPerChunk];
if (!m_triareas)
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'm_triareas' (%d).", chunkyMesh->maxTrisPerChunk);
return 0;
}
float tbmin[2], tbmax[2];
tbmin[0] = cfg.bmin[0];
tbmin[1] = cfg.bmin[2];
tbmax[0] = cfg.bmax[0];
tbmax[1] = cfg.bmax[2];
int cid[512];// TODO: Make grow when returning too many items.
const int ncid = rcGetChunksOverlappingRect(chunkyMesh, tbmin, tbmax, cid, 512);
if (!ncid) {
CleanupAfterTileBuild();
return 0;
}
int m_tileTriCount = 0;
for (int i = 0; i < ncid; ++i)
{
const rcChunkyTriMeshNode& node = chunkyMesh->nodes[cid[i]];
const int* tris = &chunkyMesh->tris[node.i*3];
const int ntris = node.n;
m_tileTriCount += ntris;
memset(m_triareas, 0, ntris*sizeof(unsigned char));
rcMarkWalkableTriangles(ctx, cfg.walkableSlopeAngle,
verts, nverts, tris, ntris, m_triareas);
rcRasterizeTriangles(ctx, verts, nverts, tris, m_triareas, ntris, *m_solid, cfg.walkableClimb);
}
// Once all geometry is rasterized, we do initial pass of filtering to
// remove unwanted overhangs caused by the conservative rasterization
// as well as filter spans where the character cannot possibly stand.
// Domi edit: Do not filter any triangles
#ifndef DOMI_EDIT
rcFilterLowHangingWalkableObstacles(ctx, cfg.walkableClimb, *m_solid);
rcFilterLedgeSpans(ctx, cfg.walkableHeight, cfg.walkableClimb, *m_solid);
rcFilterWalkableLowHeightSpans(ctx, cfg.walkableHeight, *m_solid);
#endif
// Compact the heightfield so that it is faster to handle from now on.
// This will result more cache coherent data as well as the neighbours
// between walkable cells will be calculated.
m_chf = rcAllocCompactHeightfield();
if (!m_chf)
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'chf'.");
return 0;
}
if (!rcBuildCompactHeightfield(ctx, cfg.walkableHeight, cfg.walkableClimb, *m_solid, *m_chf))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build compact data.");
return 0;
}
// Erode the walkable area by agent radius.
if (!rcErodeWalkableArea(ctx, cfg.walkableRadius, *m_chf))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not erode.");
return 0;
}
// (Optional) Mark areas.
const ConvexVolume* vols = geom->getConvexVolumes();
for (int i = 0; i < geom->getConvexVolumeCount(); ++i)
rcMarkConvexPolyArea(ctx, vols[i].verts, vols[i].nverts, vols[i].hmin, vols[i].hmax, (unsigned char)vols[i].area, *m_chf);
if (0) // m_monotonePartitioning
{
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegionsMonotone(ctx, *m_chf, cfg.borderSize, cfg.minRegionArea, cfg.mergeRegionArea))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build regions.");
return 0;
}
}
else
{
// Prepare for region partitioning, by calculating distance field along the walkable surface.
if (!rcBuildDistanceField(ctx, *m_chf))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build distance field.");
return 0;
}
// Partition the walkable surface into simple regions without holes.
if (!rcBuildRegions(ctx, *m_chf, cfg.borderSize, cfg.minRegionArea, cfg.mergeRegionArea))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not build regions.");
return 0;
}
}
// Create contours.
m_cset = rcAllocContourSet();
if (!m_cset)
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'cset'.");
return 0;
}
if (!rcBuildContours(ctx, *m_chf, cfg.maxSimplificationError, cfg.maxEdgeLen, *m_cset))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not create contours.");
return 0;
}
if (m_cset->nconts == 0)
{
CleanupAfterTileBuild();
return 0;
}
// Build polygon navmesh from the contours.
m_pmesh = rcAllocPolyMesh();
if (!m_pmesh)
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'pmesh'.");
return 0;
}
if (!rcBuildPolyMesh(ctx, *m_cset, cfg.maxVertsPerPoly, *m_pmesh))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could not triangulate contours.");
return 0;
}
// Build detail mesh.
m_dmesh = rcAllocPolyMeshDetail();
if (!m_dmesh)
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Out of memory 'dmesh'.");
return 0;
}
if (!rcBuildPolyMeshDetail(ctx, *m_pmesh, *m_chf,
cfg.detailSampleDist, cfg.detailSampleMaxError,
*m_dmesh))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "buildNavigation: Could build polymesh detail.");
return 0;
}
unsigned char* navData = 0;
int navDataSize = 0;
if (cfg.maxVertsPerPoly <= DT_VERTS_PER_POLYGON)
{
if (m_pmesh->nverts >= 0xffff)
{
CleanupAfterTileBuild();
// The vertex indices are ushorts, and cannot point to more than 0xffff vertices.
ctx->log(RC_LOG_ERROR, "Too many vertices per tile %d (max: %d).", m_pmesh->nverts, 0xffff);
return 0;
}
// Update poly flags from areas.
/*for (int i = 0; i < m_pmesh->npolys; ++i)
{
if (m_pmesh->areas[i] == RC_WALKABLE_AREA)
m_pmesh->areas[i] = SAMPLE_POLYAREA_GROUND;
if (m_pmesh->areas[i] == SAMPLE_POLYAREA_GROUND ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_GRASS ||
m_pmesh->areas[i] == SAMPLE_POLYAREA_ROAD)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_WATER)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_SWIM;
}
else if (m_pmesh->areas[i] == SAMPLE_POLYAREA_DOOR)
{
m_pmesh->flags[i] = SAMPLE_POLYFLAGS_WALK | SAMPLE_POLYFLAGS_DOOR;
}
}*/
dtNavMeshCreateParams params;
memset(¶ms, 0, sizeof(params));
params.verts = m_pmesh->verts;
params.vertCount = m_pmesh->nverts;
params.polys = m_pmesh->polys;
params.polyAreas = m_pmesh->areas;
params.polyFlags = m_pmesh->flags;
params.polyCount = m_pmesh->npolys;
params.nvp = m_pmesh->nvp;
params.detailMeshes = m_dmesh->meshes;
params.detailVerts = m_dmesh->verts;
params.detailVertsCount = m_dmesh->nverts;
params.detailTris = m_dmesh->tris;
params.detailTriCount = m_dmesh->ntris;
params.offMeshConVerts = geom->getOffMeshConnectionVerts();
params.offMeshConRad = geom->getOffMeshConnectionRads();
params.offMeshConDir = geom->getOffMeshConnectionDirs();
params.offMeshConAreas = geom->getOffMeshConnectionAreas();
params.offMeshConFlags = geom->getOffMeshConnectionFlags();
params.offMeshConUserID = geom->getOffMeshConnectionId();
params.offMeshConCount = geom->getOffMeshConnectionCount();
params.walkableHeight = (float)cfg.walkableHeight;
params.walkableRadius = (float)cfg.walkableRadius;
params.walkableClimb = (float)cfg.walkableClimb;
params.tileX = tx;
params.tileY = ty;
params.tileLayer = 0;
rcVcopy(params.bmin, m_pmesh->bmin);
rcVcopy(params.bmax, m_pmesh->bmax);
params.cs = cfg.cs;
params.ch = cfg.ch;
params.buildBvTree = true;
if (!dtCreateNavMeshData(¶ms, &navData, &navDataSize))
{
CleanupAfterTileBuild();
ctx->log(RC_LOG_ERROR, "Could not build Detour navmesh.");
return 0;
}
}
ctx->stopTimer(RC_TIMER_TOTAL);
// Show performance stats.
ctx->log(RC_LOG_PROGRESS, ">> Polymesh: %d vertices %d polygons", m_pmesh->nverts, m_pmesh->npolys);
dataSize = navDataSize;
CleanupAfterTileBuild();
return navData;
}
