STATIC_PREFIX int run_cmd(char * cmd)
{
int argc;
char * argv[4]={NULL,NULL,NULL,NULL};
char * str;
for(argc=0,str=cmd;argc<4;argc++)
{
while(*str==0x20)
str++;
if(*str==0)
break;
if(*str=='"')
{
argv[argc]=++str;
while(*str!='"'&&*str!=0)
str++;
if(*str==0)
break;
*str++=0;
continue;
}
argv[argc]=str;
while(*str!=0x20&&*str!=0)
str++;
if(*str==0)
{
argc++;
break;
}
*str++=0;
}
if(argc==0)
return 1;
switch(argv[0][0])
{
case 'w':
debug_write_reg(argc,argv);
break;
case 'r':
debug_read_reg(argc,argv);
break;
#if (defined AML_DEBUGROM)||(CONFIG_ENABLE_SPL_MORE_CMD)
case 'P':
memory_pll_init(argc,argv);
break;
case 'S':
show_setting_addr(argc,argv);
break;
case 'M':
debugrom_ddr_init(argc,argv);
break;
case 'm':
clk_msr(argc,argv);
break;
case 'B':
debugrom_set_start(argc,argv);
break;
#endif
#if (defined AML_DEBUGROM)
case 's':
debugrom_save_to_spi(argc,argv);
break;
case 'c':
caculate_sum(argc,argv);
break;
#endif
case 'a':
start_arc(argc,argv);
break;
case 't':
restart_arm();
break;
case 'q':
return 0;
}
return 1;
}
void enter_power_down()
{
int i;
unsigned int uboot_cmd_flag=readl(P_AO_RTI_STATUS_REG2);//u-boot suspend cmd flag
unsigned int vcin_state = 0;
int voltage = 0;
int axp_ocv = 0;
int wdt_flag;
// First, we disable all memory accesses.
f_serial_puts("step 1\n");
asm(".long 0x003f236f"); //add sync instruction.
store_restore_plls(0);
f_serial_puts("ddr self-refresh\n");
wait_uart_empty();
ddr_self_refresh();
f_serial_puts("CPU off...\n");
wait_uart_empty();
cpu_off();
f_serial_puts("CPU off done\n");
wait_uart_empty();
#ifdef CONFIG_CEC_WAKEUP
hdmi_cec_func_config = readl(P_AO_DEBUG_REG0);
f_serial_puts("CEC M8:uboot: P_AO_DEBUG_REG0:\n");
serial_put_hex(hdmi_cec_func_config,32);
f_serial_puts("\n");
#endif
if(p_arc_pwr_op->power_off_at_24M)
p_arc_pwr_op->power_off_at_24M();
#ifdef CONFIG_M201_COSTDOWN
/* for led */
clrbits_le32(P_AO_GPIO_O_EN_N,1<<18);
setbits_le32(P_AO_GPIO_O_EN_N,1<<29);
#endif
// while(readl(0xc8100000) != 0x13151719)
// {}
//non 32k crystal oscillator platform DONT enter 32k in suspend mode
#ifndef CONFIG_NON_32K
switch_24M_to_32K();
#endif
if(p_arc_pwr_op->power_off_at_32K_1)
p_arc_pwr_op->power_off_at_32K_1();
if(p_arc_pwr_op->power_off_at_32K_2)
p_arc_pwr_op->power_off_at_32K_2();
// gate off: bit0: REMOTE; bit3: UART
#ifndef CONFIG_NON_32K
writel(readl(P_AO_RTI_GEN_CNTL_REG0)&(~(0x8)),P_AO_RTI_GEN_CNTL_REG0);
#endif
if(uboot_cmd_flag == 0x87654321)//u-boot suspend cmd flag
{
if(p_arc_pwr_op->power_off_ddr15)
p_arc_pwr_op->power_off_ddr15();
}
wdt_flag=readl(P_WATCHDOG_TC)&(1<<19);
if(wdt_flag)
writel(readl(P_WATCHDOG_TC)&(~(1<<19)),P_WATCHDOG_TC);
#if 1
vcin_state = p_arc_pwr_op->detect_key(uboot_cmd_flag);
#else
for(i=0;i<10;i++)
{
udelay__(1000);
//udelay(1000);
}
#endif
if(uboot_cmd_flag == 0x87654321)//u-boot suspend cmd flag
{
if(p_arc_pwr_op->power_on_ddr15)
p_arc_pwr_op->power_on_ddr15();
}
if(wdt_flag)
writel((6*7812|((1<<16)-1))|(1<<19),P_WATCHDOG_TC);
// gate on: bit0: REMOTE; bit3: UART
writel(readl(P_AO_RTI_GEN_CNTL_REG0)|0x8,P_AO_RTI_GEN_CNTL_REG0);
if(p_arc_pwr_op->power_on_at_32K_2)
p_arc_pwr_op->power_on_at_32K_2();
if(p_arc_pwr_op->power_on_at_32K_1)
p_arc_pwr_op->power_on_at_32K_1();
#ifndef CONFIG_NON_32K
switch_32K_to_24M();
#endif
// power on even more domains
if(p_arc_pwr_op->power_on_at_24M)
p_arc_pwr_op->power_on_at_24M();
uart_reset();
f_serial_puts("step 8: ddr resume\n");
wait_uart_empty();
ddr_resume();
#ifdef CONFIG_M201_COSTDOWN
/* for led */
clrbits_le32(P_AO_GPIO_O_EN_N,1<<29);
setbits_le32(P_AO_GPIO_O_EN_N,1<<18);
#endif
f_serial_puts("restore pll\n");
wait_uart_empty();
store_restore_plls(1);//Before switch back to clk81, we need set PLL
if (uboot_cmd_flag == 0x87654321 && (vcin_state == FLAG_WAKEUP_PWROFF)) {
/*
* power off system before ARM is restarted
*/
f_serial_puts("no extern power shutdown\n");
wait_uart_empty();
p_arc_pwr_op->shut_down();
do {
udelay__(2000 * 100);
f_serial_puts("wait shutdown...\n");
wait_uart_empty();
}while(1);
}
#ifdef CONFIG_MESON_TRUSTZONE
copy_reboot_code(temp_arm_base);
#else
copy_reboot_code(NULL);
#endif
writel(vcin_state,P_AO_RTI_STATUS_REG2);
f_serial_puts("restart arm\n");
wait_uart_empty();
restart_arm();
if (uboot_cmd_flag == 0x87654321) {
writel(0,P_AO_RTI_STATUS_REG2);
writel(readl(P_AO_RTI_PWR_CNTL_REG0)|(1<<4),P_AO_RTI_PWR_CNTL_REG0);
clrbits_le32(P_HHI_SYS_CPU_CLK_CNTL,1<<19);
//writel(10,0xc1109904);
writel(1<<19|1<<24|10,0xc1109900);
do{udelay__(200);f_serial_puts("wait reset...\n");wait_uart_empty();}while(1);
}
}
