Пример #1
0
void spi_master_close(const spi_master_hw_instance_t spi_master_hw_instance)
{
    #if defined(SPI_MASTER_0_ENABLE) || defined(SPI_MASTER_1_ENABLE)

    volatile spi_master_instance_t * p_spi_instance = spi_master_get_instance(
        spi_master_hw_instance);
    APP_ERROR_CHECK_BOOL(p_spi_instance != NULL);

    /* Disable interrupt */
    APP_ERROR_CHECK(sd_nvic_ClearPendingIRQ(p_spi_instance->irq_type));
    APP_ERROR_CHECK(sd_nvic_DisableIRQ(p_spi_instance->irq_type));

    p_spi_instance->p_nrf_spi->ENABLE = (SPI_ENABLE_ENABLE_Disabled << SPI_ENABLE_ENABLE_Pos);

    /* Set Slave Select pin as input with pull-up. */
    nrf_gpio_pin_set(p_spi_instance->pin_slave_select);
    nrf_gpio_cfg_input(p_spi_instance->pin_slave_select, NRF_GPIO_PIN_PULLUP);
    p_spi_instance->pin_slave_select = (uint8_t)0xFF;

    /* Disconnect pins from SPI hardware */
    p_spi_instance->p_nrf_spi->PSELSCK  = (uint32_t)SPI_PIN_DISCONNECTED;
    p_spi_instance->p_nrf_spi->PSELMOSI = (uint32_t)SPI_PIN_DISCONNECTED;
    p_spi_instance->p_nrf_spi->PSELMISO = (uint32_t)SPI_PIN_DISCONNECTED;

    /* Reset to default values */
    spi_master_init_hw_instance(NULL, (IRQn_Type)0, p_spi_instance, false);
    #else
    return;
    #endif
}
Пример #2
0
void softdevice_handler_suspend()
{
#ifdef SOFTDEVICE_PRESENT
    ret_code_t err_code = sd_nvic_DisableIRQ((IRQn_Type)SOFTDEVICE_EVT_IRQ);
    APP_ERROR_CHECK(err_code);
#else
    NVIC_DisableIRQ(SOFTDEVICE_EVT_IRQ);
#endif
    m_suspended = true;
    return;
}
Пример #3
0
static uint16_t
adc_read_blocking()
{
	while (NRF_ADC->BUSY == 1) {
		// __asm("nop");
	}
	NRF_ADC->EVENTS_END = 0;
	sd_nvic_DisableIRQ(ADC_IRQn);
	NRF_ADC->INTENCLR = ADC_INTENCLR_END_Enabled;
	NRF_ADC->TASKS_START = 1;
        adc_config();
        NRF_ADC->ENABLE = ADC_ENABLE_ENABLE_Enabled;
	while (NRF_ADC->EVENTS_END == 0) {
		// __asm("nop");
	}
	uint16_t    batt_lvl_in_milli_volts;
	uint16_t result = NRF_ADC->RESULT;
	batt_lvl_in_milli_volts = ADC_RESULT_IN_MILLI_VOLTS(result);
	result = battery_level_in_percent(batt_lvl_in_milli_volts);
        NRF_ADC->EVENTS_END     = 0;
	NRF_ADC->TASKS_STOP     = 1;
	return result;
}
Пример #4
0
uint32_t spi_master_send_recv(const spi_master_hw_instance_t spi_master_hw_instance,
                              uint8_t * const p_tx_buf, const uint16_t tx_buf_len,
                              uint8_t * const p_rx_buf, const uint16_t rx_buf_len)
{
    #if defined(SPI_MASTER_0_ENABLE) || defined(SPI_MASTER_1_ENABLE)

    volatile spi_master_instance_t * p_spi_instance = spi_master_get_instance(
        spi_master_hw_instance);
    APP_ERROR_CHECK_BOOL(p_spi_instance != NULL);

    uint32_t err_code   = NRF_SUCCESS;
    uint16_t max_length = 0;
    
    uint8_t nested_critical_region = 0;
    
    //Check if disable all IRQs flag is set
    if (p_spi_instance->disable_all_irq)
    {
        //Disable interrupts.
        APP_ERROR_CHECK(sd_nvic_critical_region_enter(&nested_critical_region));
    }
    else
    {
        //Disable interrupt SPI.
        APP_ERROR_CHECK(sd_nvic_DisableIRQ(p_spi_instance->irq_type));
    }

    //Initialize and perform data transfer
    if (p_spi_instance->state == SPI_MASTER_STATE_IDLE)
    {
        max_length = (rx_buf_len > tx_buf_len) ? rx_buf_len : tx_buf_len;

        if (max_length > 0)
        {
            p_spi_instance->state        = SPI_MASTER_STATE_BUSY;
            p_spi_instance->bytes_count  = 0;
            p_spi_instance->started_flag = false;
            p_spi_instance->max_length   = max_length;

            /* Initialize buffers */
            spi_master_buffer_init(p_tx_buf,
                                   tx_buf_len,
                                   &(p_spi_instance->p_tx_buffer),
                                   &(p_spi_instance->tx_length),
                                   &(p_spi_instance->tx_index));
            spi_master_buffer_init(p_rx_buf,
                                   rx_buf_len,
                                   &(p_spi_instance->p_rx_buffer),
                                   &(p_spi_instance->rx_length),
                                   &(p_spi_instance->rx_index));

            nrf_gpio_pin_clear(p_spi_instance->pin_slave_select);
            spi_master_send_initial_bytes(p_spi_instance);
        }
        else
        {
            err_code = NRF_ERROR_INVALID_PARAM;
        }
    }
    else
    {
        err_code = NRF_ERROR_BUSY;
    }
    
    //Check if disable all IRQs flag is set.
    if (p_spi_instance->disable_all_irq)
    {   
        //Enable interrupts.
        APP_ERROR_CHECK(sd_nvic_critical_region_exit(nested_critical_region));
    }
    else
    {
        //Enable SPI interrupt.
        APP_ERROR_CHECK(sd_nvic_EnableIRQ(p_spi_instance->irq_type));
    }

    return err_code;
    #else
    return NRF_ERROR_NOT_SUPPORTED;
    #endif
}