// walk through list of devices and calls Init() function
BOOL BlockStorageList::InitializeDevices()
{
UINT32 regionIndex, rangeIndex;
ByteAddress Address;
BlockStorageDevice* block = s_deviceList.FirstNode();
if(block == NULL)
{
#if defined(PLATFORM_ARM)
debug_printf( "There are no block storage devices to initialize" );
#endif
return FALSE;
}
UINT32 BlockUsage = BlockUsage::CONFIG;
BOOL success = TRUE;
if(s_primaryDevice == NULL)
{
// initialize all the "Static" block storage
// that is all the non-removeable block storage.
while(block->Next())
{
success = block->InitializeDevice() && success; // even if success == FALSE, InitalizeDevice() will still get called
if (block->FindForBlockUsage( BlockUsage, Address, regionIndex, rangeIndex ))
{
if (s_primaryDevice == NULL)
{
s_primaryDevice = block;
}
else
{
// there must be one and only one primary device
return FALSE;
}
}
block = block->Next();
}
if (s_primaryDevice == NULL) return FALSE;
}
else
{
return FALSE;
}
return success;
}
void ApplicationEntryPoint()
{
#if defined(TEST_DAC)
UINT32 FramesNum = g_LPC24XX_DAC_Driver.GetBufferFrameCapacity();
if (DAC_FRAME_BUFFERS_NUM!=FramesNum)
{
debug_printf( "Error, BufferFrameCapacity != DAC_FRAME_BUFFERS_NUM: %d != %d.\r\n", FramesNum, DAC_FRAME_BUFFERS_NUM );
}
UINT32 nextInFrameOffset=0;
UINT16 frameLength = MAX_DECODED_FRAME_SIZE/2;
short* frameSignedStart = NULL;
LPC24XX_VIC& VIC = LPC24XX::VIC();
/*debug_printf("VIC INTRSEL = 0x%08x\r\n", VIC.INTRSEL);
VIC.INTRSEL |= 1 << LPC24XX_TIMER::getIntNo(LPC24XX_DAC::Timer);
debug_printf("new VIC INTRSEL = 0x%08x\r\n", VIC.INTRSEL);*/
VIC.VECTPRIORITY[LPC24XX_TIMER::getIntNo(LPC24XX_DAC::Timer)] = 0;
for(int i= 0; i< 32; i++)
{
debug_printf("PRIO INTR%02d = %d \r\n", i,VIC.VECTPRIORITY[i]);
}
debug_printf( "Init DAC, 8kHz output.\r\n" );
g_LPC24XX_DAC_Driver.Initialize(OUT_FREQ);
debug_printf( "BUFFER PRE-FILL TEST.\r\n" );
debug_printf( "Adding frames to the DAC driver buffer: " );
debug_printf("total frames to be added = %d\r\n", TEST_SAMPLES_NUM/MAX_DECODED_FRAME_SIZE-CUTOUT);
debug_printf("DAC frame buffers available = %d\r\n", DAC_FRAME_BUFFERS_NUM);
if(DAC_FRAME_BUFFERS_NUM<(TEST_SAMPLES_NUM/MAX_DECODED_FRAME_SIZE-CUTOUT))
debug_printf("ONLY THE FIRST %d FRAMES OF THE SAMPLE WILL BE PLAYED.\r\n", DAC_FRAME_BUFFERS_NUM);
while(nextInFrameOffset+(MAX_DECODED_FRAME_SIZE*CUTOUT) < TEST_SAMPLES_NUM)
{
//if(i%(1024*256)) continue;
frameSignedStart = (short*)(bin_data+nextInFrameOffset);
if(g_LPC24XX_DAC_Driver.AddFrame(frameSignedStart, frameLength))
{
debug_printf( " done.\r\n" );
nextInFrameOffset+=MAX_DECODED_FRAME_SIZE;
}
else
{
debug_printf( "Buffer full, starting playout.\r\n");
break;
}
}
resetDACISRTiming();
debug_printf( "DAC.On() in 2 seconds\r\n");
Events_WaitForEvents( 0, 2000 );
if(!hijackISRs())
return;
if(g_LPC24XX_DAC_Driver.On())
{
//debug_printf( "Done. 2sec wait.\r\n" ); don't output to avoid adding serial activity during the test
}
else
{
debug_printf( "FAILED.\r\n" );
}
while(g_LPC24XX_DAC_Driver.GetBufferLevel()>0)
{
//debug_printf("Samples left: %d\r\n", g_LPC24XX_DAC_Driver.GetBufferLevel());
//debug_printf("Frames left: %d\r\n", g_LPC24XX_DAC_Driver.GetFramesLeft());
}
//stop logging interrupts before starting to output again
int finalIrqCount = irq_count;
irq_count = 8192;
Events_WaitForEvents( 0, 5000 );
if(!restoreISRs())
return;
debug_printf("%d frames left.\r\n", g_LPC24XX_DAC_Driver.GetFramesLeft());
debug_printf("Final IRQ count = %u\r\n", finalIrqCount);
debug_printf( "BUFFER PRE-FILL TEST OVER.\r\n");
displayRunTestResults();
debug_printf("CSV DATA OUTPUT FOLLOWS\r\n");
//csvRunTestResults();
debug_printf("\r\nPARALLEL BUFFER FILL TEST\r\n" );
Events_WaitForEvents( 0, 3000 );
debug_printf( "DAC.Off()\r\n");
if(g_LPC24XX_DAC_Driver.Off())
{
debug_printf( "Done.\r\n" );
}
else
{
debug_printf( "FAILED.\r\n" );
}
debug_printf( "Uninit DAC\r\n");
g_LPC24XX_DAC_Driver.Uninitialize();
debug_printf( "Done.\r\n");
debug_printf( "Init DAC, 8kHz output.\r\n" );
g_LPC24XX_DAC_Driver.Initialize(OUT_FREQ);
resetDACISRTiming();
debug_printf( "DAC.On() in 2 seconds\r\n");
Events_WaitForEvents( 0, 2000 );
if(g_LPC24XX_DAC_Driver.On())
{
//debug_printf( "Done.\r\n" );
}
else
{
debug_printf( "FAILED.\r\n" );
}
debug_printf( "Adding frames to the DAC driver buffer: " );
nextInFrameOffset=0;
debug_printf("total frames to be added = %d\r\n", TEST_SAMPLES_NUM/MAX_DECODED_FRAME_SIZE-CUTOUT);
//FILL JUST ONCE
while(nextInFrameOffset+(MAX_DECODED_FRAME_SIZE*CUTOUT) < TEST_SAMPLES_NUM)
{
//if(i%(1024*256)) continue;
frameSignedStart = (short*)(bin_data+nextInFrameOffset);
if(g_LPC24XX_DAC_Driver.AddFrame(frameSignedStart, frameLength))
{
debug_printf( " done.\r\n" );
nextInFrameOffset+=MAX_DECODED_FRAME_SIZE;
}
else
{
//debug_printf( "FAIL.\r\n");
}
}
while(g_LPC24XX_DAC_Driver.GetBufferLevel()>0)
{
//debug_printf("Samples left: %d\r\n", g_LPC24XX_DAC_Driver.GetBufferLevel());
//debug_printf("Frames left: %d\r\n", g_LPC24XX_DAC_Driver.GetFramesLeft());
}
Events_WaitForEvents( 0, 3000 );
displayRunTestResults();
debug_printf("CSV DATA OUTPUT FOLLOWS\r\n");
csvRunTestResults();
/*CONTINUOUS REFILL with samples
while(true)
{
//if(i%(1024*256)) continue;
frameSignedStart = (short*)(bin_data+nextInFrameOffset);
if(g_LPC24XX_DAC_Driver.AddFrame(frameSignedStart, frameLength))
{
//debug_printf( " done.\r\n" );
nextInFrameOffset+=MAX_DECODED_FRAME_SIZE;
if(nextInFrameOffset+(MAX_DECODED_FRAME_SIZE*CUTOUT)>=TEST_SAMPLES_NUM)
nextInFrameOffset = 0;
}
else
{
//debug_printf( "FAIL.\r\n");
}
debug_printf("Samples left: %d\r\n", g_LPC24XX_DAC_Driver.GetBufferLevel());
debug_printf("Frames left: %d\r\n", g_LPC24XX_DAC_Driver.GetFramesLeft());
}*///end continuous refill
debug_printf("%d frames left.\r\n", g_LPC24XX_DAC_Driver.GetFramesLeft());
debug_printf( "PARALLEL BUFFER FILL TEST OVER.\r\n\r\n" );
//Events_WaitForEvents( 0, 10000 );
debug_printf( "DAC.Off()\r\n");
if(g_LPC24XX_DAC_Driver.Off())
{
debug_printf( "Done.\r\n" );
}
else
{
debug_printf( "FAILED.\r\n" );
}
debug_printf( "Uninit DAC()\r\n");
g_LPC24XX_DAC_Driver.Uninitialize();
debug_printf( "Done.\r\n");
#endif
#if defined(TEST_JOYSTICK)
extern LPC24XX_GPIO_Driver g_LPC24XX_GPIO_Driver;
wait_joystick = true;
for(UINT32 pin = LPC24XX_GPIO::c_P2_22; pin < LPC24XX_GPIO::c_P2_28; pin++)
{
if(pin == LPC24XX_GPIO::c_P2_24)
continue;
if(!g_LPC24XX_GPIO_Driver.EnableInputPin( pin, false, joystickISR, NULL, GPIO_INT_EDGE_HIGH, (GPIO_RESISTOR)2 ))
{
debug_printf("Cannot enable pin %u as INPUT pin.\r\n", pin);
exit(1);
}
debug_printf("Enabled pin %u as INPUT pin.\r\n", pin);
}
while(wait_joystick) {};
#endif
#if defined(TEST_SST39WF)
while(1)
{
lcd_printf ( "Hello, world from the LCD!\r\n" );
hal_printf ( "Hello, world from the HAL!\r\n" );
debug_printf( "Hello, world from the debug intf!\r\n" );
if(BlockStorageList::GetNumDevices() != 1)
{
debug_printf( "%d Block Devices present!\r\n", BlockStorageList::GetNumDevices() );
break;
}
BlockStorageDevice* SST = BlockStorageList::GetFirstDevice();
if(SST == NULL)
{
debug_printf( "GetFirstDevice failed.\r\n" );
break;
}
const BlockDeviceInfo* SSTInfo = SST->GetDeviceInfo();
if(SSTInfo == NULL)
{
debug_printf( "GetDeviceInfo failed.\r\n" );
break;
}
debug_printf( "NumRegions in BSDevice: %d\r\n", SSTInfo->NumRegions);
ByteAddress PhyAddress = (ByteAddress) 0xC0FFEEEE;
SectorAddress SectAddress = 0xC0FFEEEE;
UINT32 RangeIndex;
UINT32 RegionIndex;
const BlockRegionInfo *pBlockRegionInfo;
SST->FindForBlockUsage( /*UINT32*/ BlockRange::BLOCKTYPE_DEPLOYMENT ,
PhyAddress , RegionIndex, RangeIndex );
if(PhyAddress == 0xC0FFEEEE)
{
debug_printf( "FindForBlockUsage failed.\r\n" );
break;
}
debug_printf( "Sector 0x%08x physical address: 0x%08x\r\n", SectAddress, PhyAddress);
BYTE pSectorBuf[] = {0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9, 0xA, 0xB, 0xC, 0xD, 0xE, 0xF};
//ERASE before writing!
if(!SST->IsBlockErased(PhyAddress, 0x1000))
{
debug_printf( "Erasing block " );
if(!SST->EraseBlock(SectAddress))
{
debug_printf( "failed.\r\n" );
break;
}
debug_printf( "successful.\r\n" );
}
if(SST->Write(/*UINT32*/ PhyAddress, /*UINT32 NumOfBytes*/ 16, /*BYTE* */ pSectorBuf, /*SectorMetadata* */ FALSE))
debug_printf( "Correctly written 16 bytes to Sector 0x%08x\r\n", SectAddress);
Events_WaitForEvents( 0, 2000 );
}
#endif //TEST_SST39WF
#if defined(TEST_PWM)
PWM_Initialize(PWM_CHANNEL_0);
// NOTE: on the EA_LPC2478 board the first pin we will return is the 11th pin on the left side from the top of the J1 connector
GPIO_PIN pin = PWM_GetPinForChannel( PWM_CHANNEL_0 );
// from 90% to 2/3, to 50%, to 1/3 to 10%
float dc[5] = { 0.9, 0.666, 0.5, 0.333, 0.1 };
UINT32 period1 = 1000; // 1Kxz
for(UINT32 idx = 0; idx < 5; ++idx)
{
UINT32 duration1 = (UINT32)((float)period1 * dc[idx]);
PWM_ApplyConfiguration( PWM_CHANNEL_0, pin, period1, duration1, FALSE);
PWM_Start ( PWM_CHANNEL_0, pin );
// 2 secs, then change
HAL_Time_Sleep_MicroSeconds_InterruptEnabled(1 * 1000 * 1000);
//Events_WaitForEvents( 0, 2 * 1000);
PWM_Stop ( PWM_CHANNEL_0, pin );
}
// from 10Khz to 1Khz, 50% duty cycle
for(UINT32 period = 10000; period >= 1000; period -= 1000)
{
UINT32 duration = period / 2;
PWM_ApplyConfiguration( PWM_CHANNEL_0, pin, period, duration, FALSE);
PWM_Start ( PWM_CHANNEL_0, pin );
// 2 secs, then change
HAL_Time_Sleep_MicroSeconds_InterruptEnabled(1 * 1000 * 1000);
//Events_WaitForEvents( 0, 2 * 1000);
PWM_Stop ( PWM_CHANNEL_0, pin );
}
PWM_Uninitialize(PWM_CHANNEL_0);
#endif // TEST_PWM
while(1)
{
lcd_printf ( "Hello, world!\r\n" );
hal_printf ( "Hello, world!\r\n" );
debug_printf( "Hello, world!\r\n" );
Events_WaitForEvents( 0, 1000 );
}
}
