bool LineBoxList::hitTest(LayoutBoxModelObject* renderer, HitTestResult& result, const HitTestLocation& locationInContainer, const LayoutPoint& accumulatedOffset, HitTestAction hitTestAction) const
{
if (hitTestAction != HitTestForeground)
return false;
ASSERT(renderer->isLayoutBlock() || (renderer->isLayoutInline() && renderer->hasLayer())); // The only way an inline could hit test like this is if it has a layer.
// If we have no lines then we have no work to do.
if (!firstLineBox())
return false;
LayoutPoint point = locationInContainer.point();
LayoutRect rect(firstLineBox()->isHorizontal() ?
IntRect(point.x(), point.y() - locationInContainer.topPadding(), 1, locationInContainer.topPadding() + locationInContainer.bottomPadding() + 1) :
IntRect(point.x() - locationInContainer.leftPadding(), point.y(), locationInContainer.rightPadding() + locationInContainer.leftPadding() + 1, 1));
if (!anyLineIntersectsRect(renderer, rect, accumulatedOffset))
return false;
// See if our root lines contain the point. If so, then we hit test
// them further. Note that boxes can easily overlap, so we can't make any assumptions
// based off positions of our first line box or our last line box.
for (InlineFlowBox* curr = lastLineBox(); curr; curr = curr->prevLineBox()) {
RootInlineBox& root = curr->root();
if (rangeIntersectsRect(renderer, curr->logicalTopVisualOverflow(root.lineTop()), curr->logicalBottomVisualOverflow(root.lineBottom()), rect, accumulatedOffset)) {
bool inside = curr->nodeAtPoint(result, locationInContainer, accumulatedOffset, root.lineTop(), root.lineBottom());
if (inside) {
renderer->updateHitTestResult(result, locationInContainer.point() - toLayoutSize(accumulatedOffset));
return true;
}
}
}
return false;
}
void RenderLineBoxList::readyWRATHWidgets(PaintedWidgetsOfWRATHHandle &handle,
RenderBoxModelObject *renderer,
PaintInfoOfWRATH &paintInfo, int tx, int ty)
{
RenderLineBoxList_WRATHWidgets *d;
d=RenderLineBoxList_WRATHWidgets::object(renderer, handle);
ContextOfWRATH::AutoPushNode autoPushRoot(paintInfo.wrath_context, d->m_root_node);
/*
this just.. sucks. WebKit builds a list of
RenderInline objects that it will draw outlines.
It is not clear if and how that list changes,
so we punt and make all them handle non-visible
and only those that are found in the list
are then made visible.
*/
d->m_handles.hideEachObject();
d->m_outlineHandles.hideEachObject();
// Only paint during the foreground/selection phases.
if (paintInfo.phase != PaintPhaseForeground && paintInfo.phase != PaintPhaseSelection && paintInfo.phase != PaintPhaseOutline
&& paintInfo.phase != PaintPhaseSelfOutline && paintInfo.phase != PaintPhaseChildOutlines && paintInfo.phase != PaintPhaseTextClip
&& paintInfo.phase != PaintPhaseMask)
return;
ASSERT(renderer->isRenderBlock() || (renderer->isRenderInline() && renderer->hasLayer())); // The only way an inline could paint like this is if it has a layer.
// If we have no lines then we have no work to do.
if (!firstLineBox())
return;
RenderView* v = renderer->view();
bool usePrintRect = !v->printRect().isEmpty();
int outlineSize = renderer->maximalOutlineSize(paintInfo.phase);
if (!anyLineIntersectsRect(renderer, paintInfo.rect, tx, ty, usePrintRect, outlineSize))
return;
PaintInfoOfWRATH info(paintInfo);
ListHashSet<RenderInline*> outlineObjects;
info.outlineObjects = &outlineObjects;
for (InlineFlowBox* curr = firstLineBox(); curr; curr = curr->nextLineBox()) {
if (usePrintRect) {
RootInlineBox* root = curr->root();
int topForPaginationCheck = curr->logicalTopVisualOverflow(root->lineTop());
int bottomForPaginationCheck = curr->logicalLeftVisualOverflow();
if (!curr->parent()) {
// We're a root box. Use lineTop and lineBottom as well here.
topForPaginationCheck = min(topForPaginationCheck, root->lineTop());
bottomForPaginationCheck = max(bottomForPaginationCheck, root->lineBottom());
}
if (bottomForPaginationCheck - topForPaginationCheck <= v->printRect().height()) {
if (ty + bottomForPaginationCheck > v->printRect().maxY()) {
if (RootInlineBox* nextRootBox = curr->root()->nextRootBox())
bottomForPaginationCheck = min(bottomForPaginationCheck, min(nextRootBox->logicalTopVisualOverflow(), nextRootBox->lineTop()));
}
if (ty + bottomForPaginationCheck > v->printRect().maxY()) {
if (ty + topForPaginationCheck < v->truncatedAt())
v->setBestTruncatedAt(ty + topForPaginationCheck, renderer);
// If we were able to truncate, don't paint.
if (ty + topForPaginationCheck >= v->truncatedAt())
break;
}
}
}
if (lineIntersectsDirtyRect(renderer, curr, info, tx, ty)) {
RootInlineBox* root = curr->root();
PaintedWidgetsOfWRATHHandleT<InlineBox> &currHandle(d->m_handles.getHandle(curr));
currHandle.visible(true);
curr->readyWRATHWidgets(currHandle, info, tx, ty, root->lineTop(), root->lineBottom());
}
}
if (info.phase == PaintPhaseOutline || info.phase == PaintPhaseSelfOutline || info.phase == PaintPhaseChildOutlines) {
ListHashSet<RenderInline*>::iterator end = info.outlineObjects->end();
for (ListHashSet<RenderInline*>::iterator it = info.outlineObjects->begin(); it != end; ++it) {
RenderInline* flow = *it;
PaintedWidgetsOfWRATHHandle &handle(d->m_outlineHandles.getHandle(flow));
handle.visible(true);
flow->readyWRATHWidgetOutline(handle, info.wrath_context, tx, ty);
}
info.outlineObjects->clear();
}
d->m_handles.removeNonVisibleHandles();
d->m_outlineHandles.removeNonVisibleHandles();
}
void RenderLineBoxList::paint(RenderBoxModelObject* renderer, PaintInfo& paintInfo, const LayoutPoint& paintOffset) const
{
ASSERT(renderer->isRenderBlock() || (renderer->isRenderInline() && renderer->hasLayer())); // The only way an inline could paint like this is if it has a layer.
// If we have no lines then we have no work to do.
if (!firstLineBox())
return;
// FIXME: Paint-time pagination is obsolete and is now only used by embedded WebViews inside AppKit
// NSViews. Do not add any more code for this.
RenderView& v = renderer->view();
bool usePrintRect = !v.printRect().isEmpty();
if (!anyLineIntersectsRect(renderer, paintInfo.rect, paintOffset, usePrintRect))
return;
PaintInfo info(paintInfo);
ListHashSet<RenderInline*> outlineObjects;
info.outlineObjects = &outlineObjects;
// See if our root lines intersect with the dirty rect. If so, then we paint
// them. Note that boxes can easily overlap, so we can't make any assumptions
// based off positions of our first line box or our last line box.
for (InlineFlowBox* curr = firstLineBox(); curr; curr = curr->nextLineBox()) {
if (usePrintRect) {
// FIXME: This is the deprecated pagination model that is still needed
// for embedded views inside AppKit. AppKit is incapable of paginating vertical
// text pages, so we don't have to deal with vertical lines at all here.
const RootInlineBox& rootBox = curr->root();
LayoutUnit topForPaginationCheck = curr->logicalTopVisualOverflow(rootBox.lineTop());
LayoutUnit bottomForPaginationCheck = curr->logicalLeftVisualOverflow();
if (!curr->parent()) {
// We're a root box. Use lineTop and lineBottom as well here.
topForPaginationCheck = std::min(topForPaginationCheck, rootBox.lineTop());
bottomForPaginationCheck = std::max(bottomForPaginationCheck, rootBox.lineBottom());
}
if (bottomForPaginationCheck - topForPaginationCheck <= v.printRect().height()) {
if (paintOffset.y() + bottomForPaginationCheck > v.printRect().maxY()) {
if (RootInlineBox* nextRootBox = rootBox.nextRootBox())
bottomForPaginationCheck = std::min(bottomForPaginationCheck, std::min<LayoutUnit>(nextRootBox->logicalTopVisualOverflow(), nextRootBox->lineTop()));
}
if (paintOffset.y() + bottomForPaginationCheck > v.printRect().maxY()) {
if (paintOffset.y() + topForPaginationCheck < v.truncatedAt())
v.setBestTruncatedAt(paintOffset.y() + topForPaginationCheck, renderer);
// If we were able to truncate, don't paint.
if (paintOffset.y() + topForPaginationCheck >= v.truncatedAt())
break;
}
}
}
if (lineIntersectsDirtyRect(renderer, curr, info, paintOffset)) {
const RootInlineBox& rootBox = curr->root();
curr->paint(info, paintOffset, rootBox.lineTop(), rootBox.lineBottom());
}
}
if (info.phase == PaintPhaseOutline || info.phase == PaintPhaseSelfOutline || info.phase == PaintPhaseChildOutlines) {
ListHashSet<RenderInline*>::iterator end = info.outlineObjects->end();
for (ListHashSet<RenderInline*>::iterator it = info.outlineObjects->begin(); it != end; ++it) {
RenderInline* flow = *it;
flow->paintOutline(info, paintOffset);
}
info.outlineObjects->clear();
}
}
