/*
* Confirm we don't leak memory when the SelectServer is destroyed without all
* the descriptors being removed.
*/
void SelectServerTest::testShutdownWithActiveDescriptors() {
LoopbackDescriptor loopback;
loopback.Init();
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(&loopback));
OLA_ASSERT_TRUE(m_ss->AddWriteDescriptor(&loopback));
}
/*
* Check AddReadDescriptor/RemoveReadDescriptor works correctly and that the
* export map is updated.
*/
void SelectServerTest::testAddRemoveReadDescriptor() {
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
LoopbackDescriptor loopback;
loopback.Init();
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(&loopback));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
// Add a udp socket
UDPSocket udp_socket;
OLA_ASSERT_TRUE(udp_socket.Init());
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(&udp_socket));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(1, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
// Check remove works
m_ss->RemoveReadDescriptor(&loopback);
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(1, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
m_ss->RemoveReadDescriptor(&udp_socket);
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
}
/*
* Check that RemoveWriteDescriptor is reentrant.
* Similar to the case above, but this removes & deletes the descriptor from
* within the OnRead callback of the same descriptor.
*/
void SelectServerTest::testRemoveWriteWhenReadable() {
// Ownership is transferred to the SelectServer.
LoopbackDescriptor *loopback = new LoopbackDescriptor();
loopback->Init();
loopback->SetOnData(NewCallback(
this, &SelectServerTest::ReadDataAndRemove,
static_cast<ConnectedDescriptor*>(loopback)));
loopback->SetOnWritable(NewCallback(this, &SelectServerTest::NullHandler));
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(loopback));
OLA_ASSERT_TRUE(m_ss->AddWriteDescriptor(loopback));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(1, write_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
// Send some data to make this descriptor readable.
uint8_t data[] = {'a'};
loopback->Send(data, arraysize(data));
m_ss->Run();
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
}
/*
* Confirm we can't add the same descriptor twice.
*/
void SelectServerTest::testDoubleAddAndRemove() {
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get()); // internal socket
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
LoopbackDescriptor loopback;
loopback.Init();
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(&loopback));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
OLA_ASSERT_TRUE(m_ss->AddWriteDescriptor(&loopback));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(1, write_descriptor_count->Get());
m_ss->RemoveReadDescriptor(&loopback);
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(1, write_descriptor_count->Get());
m_ss->RemoveWriteDescriptor(&loopback);
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
// Trying to remove a second time shouldn't crash
m_ss->RemoveReadDescriptor(&loopback);
m_ss->RemoveWriteDescriptor(&loopback);
}
/**
* Check pausing doesn't mark the channel as bad.
*/
void HealthCheckedConnectionTest::testPauseAndResume() {
MockHealthCheckedConnection connection(&socket,
&m_ss,
heartbeat_interval,
options,
&m_clock);
socket.SetOnData(
NewCallback(&connection, &MockHealthCheckedConnection::ReadData));
connection.Setup();
m_ss.AddReadDescriptor(&socket);
connection.Setup();
m_ss.RegisterSingleTimeout(
TimeInterval(1, 0),
NewSingleCallback(this,
&HealthCheckedConnectionTest::PauseReading,
&connection));
m_ss.RegisterSingleTimeout(
TimeInterval(3, 0),
NewSingleCallback(this,
&HealthCheckedConnectionTest::ResumeReading,
&connection));
m_ss.Run();
OLA_ASSERT_TRUE(connection.ChannelOk());
}
void RpcChannelTest::setUp() {
m_socket = new LoopbackDescriptor();
m_socket->Init();
m_service = new TestServiceImpl(&m_ss);
m_channel = new RpcChannel(m_service, m_socket);
m_ss.AddReadDescriptor(m_socket);
m_stub = new TestService_Stub(m_channel);
}
/*
* Confirm we correctly detect the remote end closing the connection.
* This uses the delete_on_close option.
*/
void SelectServerTest::testRemoteEndCloseWithDelete() {
// Ownership is transferred to the SelectServer.
LoopbackDescriptor *loopback = new LoopbackDescriptor();
loopback->Init();
loopback->SetOnClose(NewSingleCallback(
this, &SelectServerTest::Terminate));
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(loopback, true));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
// Now the Write end closes
loopback->CloseClient();
m_ss->Run();
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
}
/*
* Check that RemoveWriteDescriptor is reentrant.
* We use the Execute() method to close a write descriptor during the same
* cycle in which it becomes writeable. See
* https://github.com/OpenLightingProject/ola/pull/429 for details.
*/
void SelectServerTest::testRemoveWriteWhenOtherReadable() {
Descriptors read_set, write_set, delete_set;
LoopbackDescriptor *loopback = new LoopbackDescriptor();
loopback->Init();
loopback->SetOnWritable(NewCallback(this, &SelectServerTest::NullHandler));
write_set.insert(loopback);
delete_set.insert(loopback);
OLA_ASSERT_TRUE(m_ss->AddWriteDescriptor(loopback));
OLA_ASSERT_EQ(1, write_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
m_ss->Execute(NewSingleCallback(
this, &SelectServerTest::RemoveAndDeleteDescriptors,
read_set, write_set, delete_set));
m_ss->Run();
OLA_ASSERT_EQ(0, write_descriptor_count->Get());
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
}
/*
* Check the delete_on_close feature handles the case where the descriptor
* being closed is removed from the on_close handler.
*/
void SelectServerTest::testRemoteEndCloseWithRemoveAndDelete() {
Descriptors read_set, write_set, delete_set;
LoopbackDescriptor *loopback = new LoopbackDescriptor();
loopback->Init();
read_set.insert(loopback);
loopback->SetOnClose(NewSingleCallback(
this, &SelectServerTest::RemoveAndDeleteDescriptors,
read_set, write_set, delete_set));
// Ownership is transferred.
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(loopback, true));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
// Close the write end of the descriptor.
loopback->CloseClient();
m_ss->Run();
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
}
/*
* Confirm we correctly detect the remote end closing the connection.
*/
void SelectServerTest::testRemoteEndClose() {
Descriptors read_set, write_set, delete_set;
LoopbackDescriptor loopback;
loopback.Init();
read_set.insert(&loopback);
loopback.SetOnClose(NewSingleCallback(
this, &SelectServerTest::RemoveAndDeleteDescriptors,
read_set, write_set, delete_set));
OLA_ASSERT_TRUE(m_ss->AddReadDescriptor(&loopback));
OLA_ASSERT_EQ(2, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
// now the Write end closes
loopback.CloseClient();
m_ss->Run();
OLA_ASSERT_EQ(1, connected_read_descriptor_count->Get());
OLA_ASSERT_EQ(0, read_descriptor_count->Get());
}
/**
* Check the channel works when every 2nd heartbeat is lost
*/
void HealthCheckedConnectionTest::testChannelWithPacketLoss() {
options.send_every = 2;
MockHealthCheckedConnection connection(&socket,
&m_ss,
heartbeat_interval,
options,
&m_clock);
socket.SetOnData(
NewCallback(&connection, &MockHealthCheckedConnection::ReadData));
connection.Setup();
m_ss.AddReadDescriptor(&socket);
connection.Setup();
m_ss.Run();
OLA_ASSERT_TRUE(connection.ChannelOk());
}
/*
* Check that the channel stays up when all heartbeats are received.
*/
void HealthCheckedConnectionTest::testSimpleChannel() {
options.validate_heartbeat = true;
MockHealthCheckedConnection connection(&socket,
&m_ss,
heartbeat_interval,
options,
&m_clock);
socket.SetOnData(
NewCallback(&connection, &MockHealthCheckedConnection::ReadData));
connection.Setup();
m_ss.AddReadDescriptor(&socket);
connection.Setup();
m_ss.Run();
OLA_ASSERT_TRUE(connection.ChannelOk());
}
void HealthCheckedConnectionTest::setUp() {
socket.Init();
MockHealthCheckedConnection::InitOptions(&options);
}