QgsPoint QgsMapToolCapture::mapPoint( const QgsMapMouseEvent &e ) const
{
QgsPoint newPoint = mapPoint( e.mapPoint() );
// set z value from snapped point if necessary
if ( QgsWkbTypes::hasZ( newPoint.wkbType() ) )
{
// if snapped, z dimension is taken from the corresponding snapped
// point.
if ( e.isSnapped() )
{
const QgsPointLocator::Match match = e.mapPointMatch();
if ( match.layer() && QgsWkbTypes::hasZ( match.layer()->wkbType() ) )
{
const QgsFeature ft = match.layer()->getFeature( match.featureId() );
newPoint.setZ( ft.geometry().vertexAt( match.vertexIndex() ).z() );
}
}
}
return newPoint;
}
void QgsMapToolDigitizeFeature::cadCanvasReleaseEvent( QgsMapMouseEvent *e )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mLayer );
if ( !vlayer )
//if no given layer take the current from canvas
vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QgsWkbTypes::Type layerWKBType = vlayer->wkbType();
QgsVectorDataProvider *provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), Qgis::Warning );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QgsWkbTypes::PointGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), Qgis::Warning );
return;
}
QgsPoint savePoint; //point in layer coordinates
bool isMatchPointZ = false;
try
{
QgsPoint fetchPoint;
int res;
res = fetchLayerPoint( e->mapPointMatch(), fetchPoint );
if ( QgsWkbTypes::hasZ( fetchPoint.wkbType() ) )
isMatchPointZ = true;
if ( res == 0 )
{
if ( isMatchPointZ )
savePoint = fetchPoint;
else
savePoint = QgsPoint( fetchPoint.x(), fetchPoint.y() );
}
else
{
QgsPointXY layerPoint = toLayerCoordinates( vlayer, e->mapPoint() );
if ( isMatchPointZ )
savePoint = QgsPoint( QgsWkbTypes::PointZ, layerPoint.x(), layerPoint.y(), fetchPoint.z() );
else
savePoint = QgsPoint( layerPoint.x(), layerPoint.y() );
}
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry g;
if ( layerWKBType == QgsWkbTypes::Point )
{
g = QgsGeometry( qgis::make_unique<QgsPoint>( savePoint ) );
}
else if ( !QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry( qgis::make_unique<QgsPoint>( savePoint.x(), savePoint.y(), isMatchPointZ ? savePoint.z() : defaultZValue() ) );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && !QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry::fromMultiPointXY( QgsMultiPointXY() << savePoint );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
QgsMultiPoint *mp = new QgsMultiPoint();
mp->addGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), isMatchPointZ ? savePoint.z() : defaultZValue() ) );
g.set( mp );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry( qgis::make_unique<QgsPoint>( savePoint ) );
}
if ( QgsWkbTypes::hasM( layerWKBType ) )
{
g.get()->addMValue();
}
f.setGeometry( g );
f.setValid( true );
digitized( f );
// we are done with digitizing for now so instruct advanced digitizing dock to reset its CAD points
cadDockWidget()->clearPoints();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QgsWkbTypes::LineGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), Qgis::Warning );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QgsWkbTypes::PolygonGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), Qgis::Warning );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
std::unique_ptr< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QList<QgsPointLocator::Match> snappingMatchesList;
QgsCurve *curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
snappingMatchesList = snappingMatches();
}
if ( mode() == CaptureLine )
{
QgsGeometry g( curveToAdd );
f->setGeometry( g );
}
else
{
QgsCurvePolygon *poly = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygon();
}
else
{
poly = new QgsPolygon();
}
poly->setExteriorRing( curveToAdd );
QgsGeometry g( poly );
f->setGeometry( g );
QgsGeometry featGeom = f->geometry();
int avoidIntersectionsReturn = featGeom.avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers() );
f->setGeometry( featGeom );
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
if ( f->geometry().isEmpty() ) //avoid intersection might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" ), Qgis::Critical );
stopCapturing();
return;
}
}
f->setValid( true );
digitized( *f );
stopCapturing();
}
}
}