Пример #1
0
void cgibin_reg_general(WEBBLK *webblk)
{
int i;

    REGS *regs;

    regs = sysblk.regs[sysblk.pcpu];
    if (!regs) regs = &sysblk.dummyregs;

    html_header(webblk);

    hprintf(webblk->sock, "<H2>General Registers</H2>\n");
    hprintf(webblk->sock, "<PRE>\n");
    if(regs->arch_mode != ARCH_900)
        for (i = 0; i < 16; i++)
            hprintf(webblk->sock, "GR%2.2d=%8.8X%s", i, regs->GR_L(i),
                ((i & 0x03) == 0x03) ? "\n" : "\t");
    else
        for (i = 0; i < 16; i++)
            hprintf(webblk->sock, "GR%1.1X=%16.16" I64_FMT "X%s", i,
                (U64)regs->GR_G(i), ((i & 0x03) == 0x03) ? "\n" : " ");

    hprintf(webblk->sock, "</PRE>\n");

    html_footer(webblk);

}
Пример #2
0
/*-------------------------------------------------------------------*/
int ARCH_DEP(load_ipl) (U16 lcss, U16 devnum, int cpu, int clear)
{
REGS   *regs;                           /* -> Regs                   */
DEVBLK *dev;                            /* -> Device control block   */
int     i;                              /* Array subscript           */
BYTE    unitstat;                       /* IPL device unit status    */
BYTE    chanstat;                       /* IPL device channel status */
int rc;

    /* Get started */
    if ((rc = ARCH_DEP(common_load_begin) (cpu, clear)) )
        return rc;

    /* Ensure CPU is online */
    if (!IS_CPU_ONLINE(cpu))
    {
        char buf[80];
        MSGBUF(buf, "CP%02.2X Offline", devnum);
        WRMSG (HHC00810, "E", PTYPSTR(sysblk.pcpu), sysblk.pcpu, buf);
        return -1;
    }

    /* The actual IPL proper starts here... */

    regs = sysblk.regs[cpu];    /* Point to IPL CPU's registers */
    /* Point to the device block for the IPL device */
    dev = find_device_by_devnum (lcss,devnum);
    if (dev == NULL)
    {
        char buf[80];
        MSGBUF(buf, "device %4.4X not found", devnum);
        WRMSG (HHC00810, "E", PTYPSTR(sysblk.pcpu), sysblk.pcpu, buf);
        HDC1(debug_cpu_state, regs);
        return -1;
    }

    if(sysblk.haveiplparm)
    {
        for(i=0;i<16;i++)
        {
            regs->GR_L(i)=fetch_fw(&sysblk.iplparmstring[i*4]);
        }
        sysblk.haveiplparm=0;
    }

    /* Set Main Storage Reference and Update bits */
    STORAGE_KEY(regs->PX, regs) |= (STORKEY_REF | STORKEY_CHANGE);
    sysblk.main_clear = sysblk.xpnd_clear = 0;

    /* Build the IPL CCW at location 0 */
    regs->psa->iplpsw[0] = 0x02;              /* CCW command = Read */
    regs->psa->iplpsw[1] = 0;                 /* Data address = zero */
    regs->psa->iplpsw[2] = 0;
    regs->psa->iplpsw[3] = 0;
    regs->psa->iplpsw[4] = CCW_FLAGS_CC | CCW_FLAGS_SLI;
                                        /* CCW flags */
    regs->psa->iplpsw[5] = 0;                 /* Reserved byte */
    regs->psa->iplpsw[6] = 0;                 /* Byte count = 24 */
    regs->psa->iplpsw[7] = 24;

    /* Enable the subchannel for the IPL device */
    dev->pmcw.flag5 |= PMCW5_E;

    /* Build the operation request block */                    /*@IWZ*/
    memset (&dev->orb, 0, sizeof(ORB));                        /*@IWZ*/
    dev->busy = 1;

    RELEASE_INTLOCK(NULL);

    /* Execute the IPL channel program */
    ARCH_DEP(execute_ccw_chain) (dev);

    OBTAIN_INTLOCK(NULL);

    /* Clear the interrupt pending and device busy conditions */
    obtain_lock (&sysblk.iointqlk);
    DEQUEUE_IO_INTERRUPT_QLOCKED(&dev->ioint);
    DEQUEUE_IO_INTERRUPT_QLOCKED(&dev->pciioint);
    DEQUEUE_IO_INTERRUPT_QLOCKED(&dev->attnioint);
    release_lock(&sysblk.iointqlk);
    dev->busy = 0;
    dev->scsw.flag2 = 0;
    dev->scsw.flag3 = 0;

    /* Check that load completed normally */
    unitstat = dev->scsw.unitstat;
    chanstat = dev->scsw.chanstat;

    if (unitstat != (CSW_CE | CSW_DE) || chanstat != 0)
    {
        char buf[80];
        char buf2[16];

        memset(buf,0,sizeof(buf));
        for (i=0; i < (int)dev->numsense; i++)
        {
            MSGBUF(buf2, "%2.2X", dev->sense[i]);
            strlcat(buf, buf2, sizeof(buf) );
            if ((i & 3) == 3) strlcat(buf, " ", sizeof(buf));
        }
        {
            char buffer[256];
            MSGBUF(buffer, "architecture mode %s, csw status %2.2X%2.2X, sense %s",
                get_arch_mode_string((REGS *)0),
                unitstat, chanstat, buf);
            WRMSG (HHC00828, "E", PTYPSTR(sysblk.pcpu), sysblk.pcpu, buffer);
        }
        HDC1(debug_cpu_state, regs);
        return -1;
    }

#ifdef FEATURE_S370_CHANNEL
    /* Test the EC mode bit in the IPL PSW */
    if (regs->psa->iplpsw[1] & 0x08) {
        /* In EC mode, store device address at locations 184-187 */
        STORE_FW(regs->psa->ioid, dev->devnum);
    } else {
        /* In BC mode, store device address at locations 2-3 */
        STORE_HW(regs->psa->iplpsw + 2, dev->devnum);
    }
#endif /*FEATURE_S370_CHANNEL*/

#ifdef FEATURE_CHANNEL_SUBSYSTEM
    /* Set LPUM */
    dev->pmcw.lpum = 0x80;
    STORE_FW(regs->psa->ioid, (dev->ssid<<16)|dev->subchan);

    /* Store zeroes at locations 188-191 */
    memset (regs->psa->ioparm, 0, 4);
#endif /*FEATURE_CHANNEL_SUBSYSTEM*/

    /* Save IPL device number, cpu number and lcss */
    sysblk.ipldev = devnum;
    sysblk.iplcpu = regs->cpuad;
    sysblk.ipllcss = lcss;
    sysblk.ipled = TRUE;

    /* Finish up... */
    return ARCH_DEP(common_load_finish) (regs);
} /* end function load_ipl */
Пример #3
0
void cgibin_debug_registers(WEBBLK *webblk)
{
int i, cpu = 0;
int select_gr, select_cr, select_ar;
char *value;
REGS *regs;

    if((value = cgi_variable(webblk,"cpu")))
        cpu = atoi(value);

    if((value = cgi_variable(webblk,"select_gr")) && *value == 'S')
        select_gr = 1;
    else
        select_gr = 0;

    if((value = cgi_variable(webblk,"select_cr")) && *value == 'S')
        select_cr = 1;
    else
        select_cr = 0;

    if((value = cgi_variable(webblk,"select_ar")) && *value == 'S')
        select_ar = 1;
    else
        select_ar = 0;

    /* Validate cpu number */
    if (cpu < 0 || cpu >= MAX_CPU || !IS_CPU_ONLINE(cpu))
        for (cpu = 0; cpu < MAX_CPU; cpu++)
            if(IS_CPU_ONLINE(cpu))
                break;

    if(cpu < MAX_CPU)
        regs = sysblk.regs[cpu];
    else
        regs = sysblk.regs[sysblk.pcpu];

    if (!regs) regs = &sysblk.dummyregs;

    if((value = cgi_variable(webblk,"alter_gr")) && *value == 'A')
    {
        for(i = 0; i < 16; i++)
        {
        char regname[16];
            sprintf(regname,"alter_gr%d",i);
            if((value = cgi_variable(webblk,regname)))
            {
                if(regs->arch_mode != ARCH_900)
                    sscanf(value,"%"I32_FMT"x",&(regs->GR_L(i)));
                else
                    sscanf(value,"%"I64_FMT"x",&(regs->GR_G(i)));
            }
        }
    }

    if((value = cgi_variable(webblk,"alter_cr")) && *value == 'A')
    {
        for(i = 0; i < 16; i++)
        {
        char regname[16];
            sprintf(regname,"alter_cr%d",i);
            if((value = cgi_variable(webblk,regname)))
            {
                if(regs->arch_mode != ARCH_900)
                    sscanf(value,"%"I32_FMT"x",&(regs->CR_L(i)));
                else
                    sscanf(value,"%"I64_FMT"x",&(regs->CR_G(i)));
            }
        }
    }

    if((value = cgi_variable(webblk,"alter_ar")) && *value == 'A')
    {
        for(i = 0; i < 16; i++)
        {
        char regname[16];
            sprintf(regname,"alter_ar%d",i);
            if((value = cgi_variable(webblk,regname)))
                sscanf(value,"%x",&(regs->AR(i)));
        }
    }

    html_header(webblk);

    hprintf(webblk->sock,"<form method=post>\n"
                          "<select type=submit name=cpu>\n");

    for(i = 0; i < MAX_CPU; i++)
        if(IS_CPU_ONLINE(i))
            hprintf(webblk->sock,"<option value=%d%s>CPU%4.4X</option>\n",
              i,i==cpu?" selected":"",i);

    hprintf(webblk->sock,"</select>\n"
                          "<input type=submit name=selcpu value=\"Select\">\n"
                          "<input type=hidden name=cpu value=%d>\n"
                          "<input type=hidden name=select_gr value=%c>\n"
                          "<input type=hidden name=select_cr value=%c>\n"
                          "<input type=hidden name=select_ar value=%c>\n",
                          cpu, select_gr?'S':'H',select_cr?'S':'H',select_ar?'S':'H');
    hprintf(webblk->sock,"Mode: %s\n",get_arch_mode_string(regs));
    hprintf(webblk->sock,"</form>\n");

    if(!select_gr)
    {
        hprintf(webblk->sock,"<form method=post>\n"
                              "<input type=submit name=select_gr "
                              "value=\"Select General Registers\">\n"
                              "<input type=hidden name=cpu value=%d>\n"
                              "<input type=hidden name=select_cr value=%c>\n"
                              "<input type=hidden name=select_ar value=%c>\n"
                              "</form>\n",cpu,select_cr?'S':'H',select_ar?'S':'H');
    }
    else
    {
        hprintf(webblk->sock,"<form method=post>\n"
                              "<input type=submit name=select_gr "
                              "value=\"Hide General Registers\">\n"
                              "<input type=hidden name=cpu value=%d>\n"
                              "<input type=hidden name=select_cr value=%c>\n"
                              "<input type=hidden name=select_ar value=%c>\n"
                              "</form>\n",cpu,select_cr?'S':'H',select_ar?'S':'H');

        hprintf(webblk->sock,"<form method=post>\n"
                              "<table>\n");
        for(i = 0; i < 16; i++)
        {
            if(regs->arch_mode != ARCH_900)
                hprintf(webblk->sock,"%s<td>GR%d</td><td><input type=text name=alter_gr%d size=8 "
                  "value=%8.8X></td>\n%s",
                  (i&3)==0?"<tr>\n":"",i,i,regs->GR_L(i),((i&3)==3)?"</tr>\n":"");
            else
                hprintf(webblk->sock,"%s<td>GR%d</td><td><input type=text name=alter_gr%d size=16 "
                  "value=%16.16" I64_FMT "X></td>\n%s",
                  (i&3)==0?"<tr>\n":"",i,i,(U64)regs->GR_G(i),((i&3)==3)?"</tr>\n":"");
        }
        hprintf(webblk->sock,"</table>\n"
                              "<input type=submit name=refresh value=\"Refresh\">\n"
                              "<input type=submit name=alter_gr value=\"Alter\">\n"
                              "<input type=hidden name=cpu value=%d>\n"
                              "<input type=hidden name=select_gr value=S>\n"
                              "<input type=hidden name=select_cr value=%c>\n"
                              "<input type=hidden name=select_ar value=%c>\n"
                              "</form>\n",cpu,select_cr?'S':'H',select_ar?'S':'H');
    }


    if(!select_cr)
    {
        hprintf(webblk->sock,"<form method=post>\n"
                              "<input type=submit name=select_cr "
                              "value=\"Select Control Registers\">\n"
                              "<input type=hidden name=cpu value=%d>\n"
                              "<input type=hidden name=select_gr value=%c>\n"
                              "<input type=hidden name=select_ar value=%c>\n"
                              "</form>\n",cpu,select_gr?'S':'H',select_ar?'S':'H');
    }
    else
    {
        hprintf(webblk->sock,"<form method=post>\n"
                              "<input type=submit name=select_cr "
                              "value=\"Hide Control Registers\">\n"
                              "<input type=hidden name=cpu value=%d>\n"
                              "<input type=hidden name=select_gr value=%c>\n"
                              "<input type=hidden name=select_ar value=%c>\n"
                              "</form>\n",cpu,select_gr?'S':'H',select_ar?'S':'H');

        hprintf(webblk->sock,"<form method=post>\n"
                              "<table>\n");
        for(i = 0; i < 16; i++)
        {
            if(regs->arch_mode != ARCH_900)
                hprintf(webblk->sock,"%s<td>CR%d</td><td><input type=text name=alter_cr%d size=8 "
                  "value=%8.8X></td>\n%s",
                  (i&3)==0?"<tr>\n":"",i,i,regs->CR_L(i),((i&3)==3)?"</tr>\n":"");
            else
                hprintf(webblk->sock,"%s<td>CR%d</td><td><input type=text name=alter_cr%d size=16 "
                  "value=%16.16" I64_FMT "X></td>\n%s",
                  (i&3)==0?"<tr>\n":"",i,i,(U64)regs->CR_G(i),((i&3)==3)?"</tr>\n":"");
        }
        hprintf(webblk->sock,"</table>\n"
                              "<input type=submit name=refresh value=\"Refresh\">\n"
                              "<input type=submit name=alter_cr value=\"Alter\">\n"
                              "<input type=hidden name=cpu value=%d>\n"
                              "<input type=hidden name=select_cr value=S>\n"
                              "<input type=hidden name=select_gr value=%c>\n"
                              "<input type=hidden name=select_ar value=%c>\n"
                              "</form>\n",cpu,select_gr?'S':'H',select_ar?'S':'H');
    }


    if(regs->arch_mode != ARCH_370)
    {
        if(!select_ar)
        {
            hprintf(webblk->sock,"<form method=post>\n"
                                  "<input type=submit name=select_ar "
                                  "value=\"Select Access Registers\">\n"
                                  "<input type=hidden name=cpu value=%d>\n"
                                  "<input type=hidden name=select_gr value=%c>\n"
                                  "<input type=hidden name=select_cr value=%c>\n"
                                  "</form>\n",cpu,select_gr?'S':'H',select_cr?'S':'H');
        }
        else
        {
            hprintf(webblk->sock,"<form method=post>\n"
                                  "<input type=submit name=select_ar "
                                  "value=\"Hide Access Registers\">\n"
                                  "<input type=hidden name=cpu value=%d>\n"
                                  "<input type=hidden name=select_gr value=%c>\n"
                                  "<input type=hidden name=select_cr value=%c>\n"
                                  "</form>\n",cpu,select_gr?'S':'H',select_cr?'S':'H');

            hprintf(webblk->sock,"<form method=post>\n"
                                  "<table>\n");
            for(i = 0; i < 16; i++)
            {
                hprintf(webblk->sock,"%s<td>AR%d</td><td><input type=text name=alter_ar%d size=8 "
                  "value=%8.8X></td>\n%s",
                  (i&3)==0?"<tr>\n":"",i,i,regs->AR(i),((i&3)==3)?"</tr>\n":"");
            }
            hprintf(webblk->sock,"</table>\n"
                                  "<input type=submit name=refresh value=\"Refresh\">\n"
                                  "<input type=submit name=alter_ar value=\"Alter\">\n"
                                  "<input type=hidden name=cpu value=%d>\n"
                                  "<input type=hidden name=select_gr value=%c>\n"
                                  "<input type=hidden name=select_cr value=%c>\n"
                                  "<input type=hidden name=select_ar value=S>\n"
                                  "</form>\n",cpu,select_gr?'S':'H',select_cr?'S':'H');
        }
    }

    html_footer(webblk);

}
Пример #4
0
/*-------------------------------------------------------------------*/
int ARCH_DEP(load_ipl) (U16 lcss, U16 devnum, int cpu, int clear)
{
REGS   *regs;                           /* -> Regs                   */
DEVBLK *dev;                            /* -> Device control block   */
int     i;                              /* Array subscript           */
BYTE    unitstat;                       /* IPL device unit status    */
BYTE    chanstat;                       /* IPL device channel status */

    /* Get started */
    if (ARCH_DEP(common_load_begin) (cpu, clear) != 0)
        return -1;

    /* The actual IPL proper starts here... */

    regs = sysblk.regs[cpu];    /* Point to IPL CPU's registers */

    /* Point to the device block for the IPL device */
    dev = find_device_by_devnum (lcss,devnum);
    if (dev == NULL)
    {
        logmsg (_("HHCCP027E Device %4.4X not in configuration%s\n"),
                devnum,
                (sysblk.arch_mode == ARCH_370 ?
                  " or not conneceted to channelset" : ""));
        HDC1(debug_cpu_state, regs);
        return -1;
    }
#if defined(OPTION_IPLPARM)
    if(sysblk.haveiplparm)
    {
        for(i=0;i<16;i++)
        {
            regs->GR_L(i)=fetch_fw(&sysblk.iplparmstring[i*4]);
        }
        sysblk.haveiplparm=0;
    }
#endif

    /* Set Main Storage Reference and Update bits */
    STORAGE_KEY(regs->PX, regs) |= (STORKEY_REF | STORKEY_CHANGE);
    sysblk.main_clear = sysblk.xpnd_clear = 0;

    /* Build the IPL CCW at location 0 */
    regs->psa->iplpsw[0] = 0x02;              /* CCW command = Read */
    regs->psa->iplpsw[1] = 0;                 /* Data address = zero */
    regs->psa->iplpsw[2] = 0;
    regs->psa->iplpsw[3] = 0;
    regs->psa->iplpsw[4] = CCW_FLAGS_CC | CCW_FLAGS_SLI;
                                        /* CCW flags */
    regs->psa->iplpsw[5] = 0;                 /* Reserved byte */
    regs->psa->iplpsw[6] = 0;                 /* Byte count = 24 */
    regs->psa->iplpsw[7] = 24;

    /* Enable the subchannel for the IPL device */
    dev->pmcw.flag5 |= PMCW5_E;

    /* Build the operation request block */                    /*@IWZ*/
    memset (&dev->orb, 0, sizeof(ORB));                        /*@IWZ*/
    dev->busy = 1;

    RELEASE_INTLOCK(NULL);

    /* Execute the IPL channel program */
    ARCH_DEP(execute_ccw_chain) (dev);

    OBTAIN_INTLOCK(NULL);

    /* Clear the interrupt pending and device busy conditions */
    obtain_lock (&sysblk.iointqlk);
    DEQUEUE_IO_INTERRUPT_QLOCKED(&dev->ioint);
    DEQUEUE_IO_INTERRUPT_QLOCKED(&dev->pciioint);
    DEQUEUE_IO_INTERRUPT_QLOCKED(&dev->attnioint);
    release_lock(&sysblk.iointqlk);
    dev->busy = 0;
    dev->scsw.flag2 = 0;
    dev->scsw.flag3 = 0;

    /* Check that load completed normally */
#ifdef FEATURE_S370_CHANNEL
    unitstat = dev->csw[4];
    chanstat = dev->csw[5];
#endif /*FEATURE_S370_CHANNEL*/

#ifdef FEATURE_CHANNEL_SUBSYSTEM
    unitstat = dev->scsw.unitstat;
    chanstat = dev->scsw.chanstat;
#endif /*FEATURE_CHANNEL_SUBSYSTEM*/

    if (unitstat != (CSW_CE | CSW_DE) || chanstat != 0) {
        logmsg (_("HHCCP029E %s mode IPL failed: CSW status=%2.2X%2.2X\n"
                  "           Sense="),
                get_arch_mode_string(regs), unitstat, chanstat);
        for (i=0; i < (int)dev->numsense; i++)
        {
            logmsg ("%2.2X", dev->sense[i]);
            if ((i & 3) == 3) logmsg(" ");
        }
        logmsg ("\n");
        HDC1(debug_cpu_state, regs);
        return -1;
    }

#ifdef FEATURE_S370_CHANNEL
    /* Test the EC mode bit in the IPL PSW */
    if (regs->psa->iplpsw[1] & 0x08) {
        /* In EC mode, store device address at locations 184-187 */
        STORE_FW(regs->psa->ioid, dev->devnum);
    } else {
        /* In BC mode, store device address at locations 2-3 */
        STORE_HW(regs->psa->iplpsw + 2, dev->devnum);
    }
#endif /*FEATURE_S370_CHANNEL*/

#ifdef FEATURE_CHANNEL_SUBSYSTEM
    /* Set LPUM */
    dev->pmcw.lpum = 0x80;
    STORE_FW(regs->psa->ioid, (dev->ssid<<16)|dev->subchan);

    /* Store zeroes at locations 188-191 */
    memset (regs->psa->ioparm, 0, 4);
#endif /*FEATURE_CHANNEL_SUBSYSTEM*/

    /* Save IPL device number, cpu number and lcss */
    sysblk.ipldev = devnum;
    sysblk.iplcpu = regs->cpuad;
    sysblk.ipllcss = lcss;

    /* Finish up... */
    return ARCH_DEP(common_load_finish) (regs);
} /* end function load_ipl */