Пример #1
0
void
NLTriggerBuilder::buildVaporizer(const SUMOSAXAttributes& attrs) {
    bool ok = true;
    // get the id, throw if not given or empty...
    std::string id = attrs.get<std::string>(SUMO_ATTR_ID, 0, ok);
    if (!ok) {
        return;
    }
    MSEdge* e = MSEdge::dictionary(id);
    if (e == 0) {
        WRITE_ERROR("Unknown edge ('" + id + "') referenced in a vaporizer.");
        return;
    }
    SUMOTime begin = attrs.getSUMOTimeReporting(SUMO_ATTR_BEGIN, 0, ok);
    SUMOTime end = attrs.getSUMOTimeReporting(SUMO_ATTR_END, 0, ok);
    if (!ok) {
        return;
    }
    if (begin < 0) {
        WRITE_ERROR("A vaporization begin time is negative (edge id='" + id + "').");
        return;
    }
    if (begin >= end) {
        WRITE_ERROR("A vaporization ends before it starts (edge id='" + id + "').");
        return;
    }
    if (end >= string2time(OptionsCont::getOptions().getString("begin"))) {
        Command* cb = new WrappingCommand< MSEdge >(e, &MSEdge::incVaporization);
        MSNet::getInstance()->getBeginOfTimestepEvents().addEvent(cb, begin, MSEventControl::ADAPT_AFTER_EXECUTION);
        Command* ce = new WrappingCommand< MSEdge >(e, &MSEdge::decVaporization);
        MSNet::getInstance()->getBeginOfTimestepEvents().addEvent(ce, end, MSEventControl::ADAPT_AFTER_EXECUTION);
    }
}
Пример #2
0
void
SUMORouteHandler::myStartElement(int element,
                                 const SUMOSAXAttributes& attrs) {
    switch (element) {
        case SUMO_TAG_VEHICLE:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs);
            break;
        case SUMO_TAG_PERSON:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs, false, false, true);
            break;
        case SUMO_TAG_CONTAINER:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs);
            break;
        case SUMO_TAG_FLOW:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseFlowAttributes(attrs, myBeginDefault, myEndDefault);
            break;
        case SUMO_TAG_VTYPE:
            myCurrentVType = SUMOVehicleParserHelper::beginVTypeParsing(attrs, getFileName());
            break;
        case SUMO_TAG_VTYPE_DISTRIBUTION:
            openVehicleTypeDistribution(attrs);
            break;
        case SUMO_TAG_ROUTE:
            openRoute(attrs);
            break;
        case SUMO_TAG_ROUTE_DISTRIBUTION:
            openRouteDistribution(attrs);
            break;
        case SUMO_TAG_STOP:
            addStop(attrs);
            break;
        case SUMO_TAG_TRIP: {
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs, true);
            if (myVehicleParameter->id == "") {
                //@todo warn about deprecation of missing trip ids
                myVehicleParameter->id = myIdSupplier.getNext();
            }
            myVehicleParameter->setParameter |= VEHPARS_FORCE_REROUTE;
            myActiveRouteID = "!" + myVehicleParameter->id;
            break;
        }
        case SUMO_TAG_INTERVAL: {
            bool ok;
            myBeginDefault = attrs.getSUMOTimeReporting(SUMO_ATTR_BEGIN, 0, ok);
            myEndDefault = attrs.getSUMOTimeReporting(SUMO_ATTR_END, 0, ok);
            break;
        }
        case SUMO_TAG_PARAM:
            addParam(attrs);
            break;
        default:
            break;
    }
}
Пример #3
0
void
NLHandler::addE1Detector(const SUMOSAXAttributes& attrs) {
    bool ok = true;
    // get the id, report an error if not given or empty...
    std::string id = attrs.get<std::string>(SUMO_ATTR_ID, 0, ok);
    if (!ok) {
        return;
    }
    const SUMOTime frequency = attrs.getSUMOTimeReporting(SUMO_ATTR_FREQUENCY, id.c_str(), ok);
    const SUMOReal position = attrs.get<SUMOReal>(SUMO_ATTR_POSITION, id.c_str(), ok);
    const bool friendlyPos = attrs.getOpt<bool>(SUMO_ATTR_FRIENDLY_POS, id.c_str(), ok, false);
    const bool splitByType = attrs.getOpt<bool>(SUMO_ATTR_SPLIT_VTYPE, id.c_str(), ok, false);
    const std::string lane = attrs.get<std::string>(SUMO_ATTR_LANE, id.c_str(), ok);
    const std::string file = attrs.get<std::string>(SUMO_ATTR_FILE, id.c_str(), ok);
    if (!ok) {
        return;
    }
    try {
        myDetectorBuilder.buildInductLoop(id, lane, position, frequency,
                                          FileHelpers::checkForRelativity(file, getFileName()),
                                          friendlyPos, splitByType);
    } catch (InvalidArgument& e) {
        WRITE_ERROR(e.what());
    } catch (IOError& e) {
        WRITE_ERROR(e.what());
    }
}
Пример #4
0
void
MSLaneSpeedTrigger::myStartElement(int element,
                                   const SUMOSAXAttributes& attrs) {
    // check whether the correct tag is read
    if (element != SUMO_TAG_STEP) {
        return;
    }
    // extract the values
    bool ok = true;
    SUMOTime next = attrs.getSUMOTimeReporting(SUMO_ATTR_TIME, getID().c_str(), ok);
    SUMOReal speed = attrs.getOpt<SUMOReal>(SUMO_ATTR_SPEED, getID().c_str(), ok, -1);
    // check the values
    if (next < 0) {
        WRITE_ERROR("Wrong time in vss '" + getID() + "'.");
        return;
    }
    if (speed < 0) {
        speed = myDefaultSpeed;
    }
    // set the values for the next step if they are valid
    if (myLoadedSpeeds.size() != 0 && myLoadedSpeeds.back().first == next) {
        WRITE_WARNING("Time " + time2string(next) + " was set twice for vss '" + getID() + "'; replacing first entry.");
        myLoadedSpeeds.back().second = speed;
    } else {
        myLoadedSpeeds.push_back(std::make_pair(next, speed));
    }
}
void
ROJTRTurnDefLoader::myStartElement(int element,
                                   const SUMOSAXAttributes& attrs) {
    bool ok = true;
    switch (element) {
        case SUMO_TAG_INTERVAL:
            myIntervalBegin = attrs.getSUMOTimeReporting(SUMO_ATTR_BEGIN, 0, ok);
            myIntervalEnd = attrs.getSUMOTimeReporting(SUMO_ATTR_END, 0, ok);
            break;
        case SUMO_TAG_FROMEDGE:
            beginFromEdge(attrs);
            break;
        case SUMO_TAG_TOEDGE:
            addToEdge(attrs);
            break;
        case SUMO_TAG_SINK:
            if (attrs.hasAttribute(SUMO_ATTR_EDGES)) {
                std::string edges = attrs.get<std::string>(SUMO_ATTR_EDGES, 0, ok);
                StringTokenizer st(edges, StringTokenizer::WHITECHARS);
                while (st.hasNext()) {
                    std::string id = st.next();
                    ROEdge* edge = myNet.getEdge(id);
                    if (edge == 0) {
                        throw ProcessError("The edge '" + id + "' declared as a sink is not known.");
                    }
                    edge->setType(ROEdge::ET_SINK);
                }
            }
            break;
        case SUMO_TAG_SOURCE:
            if (attrs.hasAttribute(SUMO_ATTR_EDGES)) {
                std::string edges = attrs.get<std::string>(SUMO_ATTR_EDGES, 0, ok);
                StringTokenizer st(edges, StringTokenizer::WHITECHARS);
                while (st.hasNext()) {
                    std::string id = st.next();
                    ROEdge* edge = myNet.getEdge(id);
                    if (edge == 0) {
                        throw ProcessError("The edge '" + id + "' declared as a source is not known.");
                    }
                    edge->setType(ROEdge::ET_SOURCE);
                }
            }
            break;
        default:
            break;
    }
}
Пример #6
0
void
TrajectoriesHandler::myStartElement(int element,
                                    const SUMOSAXAttributes& attrs) {
    bool ok = true;
    switch (element) {
        case SUMO_TAG_TRAJECTORIES:
            myStepSize = attrs.getFloat("timeStepSize") / 1000.;
            break;
        case SUMO_TAG_TIMESTEP:
            myCurrentTime = attrs.getSUMOTimeReporting(SUMO_ATTR_TIME, 0, ok);
            break;
        case SUMO_TAG_VEHICLE:
            if (attrs.hasAttribute(SUMO_ATTR_SPEED)) {
                SUMOReal v = attrs.getFloat(SUMO_ATTR_SPEED);
                SUMOReal a = INVALID_VALUE;
                SUMOReal s = INVALID_VALUE;
                writeEmissions(std::cout, attrs.getString(SUMO_ATTR_ID), myDefaultClass, STEPS2TIME(myCurrentTime), v, a, s);
            } else {
                const std::string acId = attrs.getString(SUMO_ATTR_ACTORCONFIG);
                const std::string id = attrs.getString(SUMO_ATTR_ID);
                if (myEmissionClassByType.count(acId) == 0) {
                    WRITE_WARNING("Unknown actor configuration '" + acId + "' for vehicle '" + id + "'!");
                } else {
                    myEmissionClassByVehicle[id] = myEmissionClassByType.count(acId) > 0 ? myEmissionClassByType[acId] : myDefaultClass;
                }
            }
            break;
        case SUMO_TAG_ACTORCONFIG: {
            const std::string id = attrs.getString(SUMO_ATTR_ID);
            const std::string vClass = attrs.getString(SUMO_ATTR_VEHICLECLASS);
            const std::string fuel = attrs.getString(SUMO_ATTR_FUEL);
            const std::string eClass = attrs.getString(SUMO_ATTR_EMISSIONCLASS);
            const SUMOReal weight = attrs.getOpt<SUMOReal>(SUMO_ATTR_WEIGHT, id.c_str(), ok, 0.) * 10.;
            myEmissionClassByType[id] = PollutantsInterface::getClass(myDefaultClass, vClass, fuel, eClass, weight);
            break;
        }
        case SUMO_TAG_MOTIONSTATE: {
            const std::string id = attrs.getString(SUMO_ATTR_VEHICLE);
            if (myEmissionClassByVehicle.count(id) == 0) {
                WRITE_WARNING("Motion state for unknown vehicle '" + id + "'!");
                myEmissionClassByVehicle[id] = myDefaultClass;
            }
            const SUMOEmissionClass c = myEmissionClassByVehicle[id];
            SUMOReal v = attrs.getFloat(SUMO_ATTR_SPEED) / 100.;
            SUMOReal a = attrs.hasAttribute(SUMO_ATTR_ACCELERATION) ? attrs.get<SUMOReal>(SUMO_ATTR_ACCELERATION, id.c_str(), ok) / 1000. : INVALID_VALUE;
            SUMOReal s = attrs.hasAttribute(SUMO_ATTR_SLOPE) ? RAD2DEG(asin(attrs.get<SUMOReal>(SUMO_ATTR_SLOPE, id.c_str(), ok) / 10000.)) : INVALID_VALUE;
            const SUMOTime time = attrs.getOpt<int>(SUMO_ATTR_TIME, id.c_str(), ok, INVALID_VALUE);
            if (myXMLOut != 0) {
                writeXMLEmissions(id, c, time, v, a, s);
            }
            if (myStdOut != 0) {
                writeEmissions(*myStdOut, id, c, STEPS2TIME(time), v, a, s);
            }
            break;
        }
        default:
            break;
    }
}
Пример #7
0
void
NLHandler::addE2Detector(const SUMOSAXAttributes& attrs) {
    // check whether this is a detector connected to a tls an optionally to a link
    bool ok = true;
    const std::string id = attrs.get<std::string>(SUMO_ATTR_ID, 0, ok);
    const std::string lsaid = attrs.getOpt<std::string>(SUMO_ATTR_TLID, id.c_str(), ok, "<invalid>");
    const std::string toLane = attrs.getOpt<std::string>(SUMO_ATTR_TO, id.c_str(), ok, "<invalid>");
    const SUMOTime haltingTimeThreshold = attrs.getOptSUMOTimeReporting(SUMO_ATTR_HALTING_TIME_THRESHOLD, id.c_str(), ok, TIME2STEPS(1));
    const SUMOReal haltingSpeedThreshold = attrs.getOpt<SUMOReal>(SUMO_ATTR_HALTING_SPEED_THRESHOLD, id.c_str(), ok, 5.0f / 3.6f);
    const SUMOReal jamDistThreshold = attrs.getOpt<SUMOReal>(SUMO_ATTR_JAM_DIST_THRESHOLD, id.c_str(), ok, 10.0f);
    const SUMOReal position = attrs.get<SUMOReal>(SUMO_ATTR_POSITION, id.c_str(), ok);
    const SUMOReal length = attrs.get<SUMOReal>(SUMO_ATTR_LENGTH, id.c_str(), ok);
    const bool friendlyPos = attrs.getOpt<bool>(SUMO_ATTR_FRIENDLY_POS, id.c_str(), ok, false);
    const bool cont = attrs.getOpt<bool>(SUMO_ATTR_CONT, id.c_str(), ok, false);
    const std::string lane = attrs.get<std::string>(SUMO_ATTR_LANE, id.c_str(), ok);
    const std::string file = attrs.get<std::string>(SUMO_ATTR_FILE, id.c_str(), ok);
    if (!ok) {
        return;
    }
    try {
        if (lsaid != "<invalid>") {
            if (toLane == "<invalid>") {
                myDetectorBuilder.buildE2Detector(id, lane, position, length, cont,
                                                  myJunctionControlBuilder.getTLLogic(lsaid),
                                                  FileHelpers::checkForRelativity(file, getFileName()),
                                                  haltingTimeThreshold, haltingSpeedThreshold, jamDistThreshold,
                                                  friendlyPos);
            } else {
                myDetectorBuilder.buildE2Detector(id, lane, position, length, cont,
                                                  myJunctionControlBuilder.getTLLogic(lsaid), toLane,
                                                  FileHelpers::checkForRelativity(file, getFileName()),
                                                  haltingTimeThreshold, haltingSpeedThreshold, jamDistThreshold,
                                                  friendlyPos);
            }
        } else {
            bool ok = true;
            SUMOTime frequency = attrs.getSUMOTimeReporting(SUMO_ATTR_FREQUENCY, id.c_str(), ok);
            if (!ok) {
                return;
            }
            myDetectorBuilder.buildE2Detector(id, lane, position, length, cont, frequency,
                                              FileHelpers::checkForRelativity(file, getFileName()),
                                              haltingTimeThreshold, haltingSpeedThreshold, jamDistThreshold,
                                              friendlyPos);
        }
    } catch (InvalidArgument& e) {
        WRITE_ERROR(e.what());
    } catch (IOError& e) {
        WRITE_ERROR(e.what());
    }
}
Пример #8
0
void
NLHandler::addWAUTSwitch(const SUMOSAXAttributes& attrs) {
    bool ok = true;
    SUMOTime t = attrs.getSUMOTimeReporting(SUMO_ATTR_TIME, myCurrentWAUTID.c_str(), ok);
    std::string to = attrs.get<std::string>(SUMO_ATTR_TO, myCurrentWAUTID.c_str(), ok);
    if (!ok) {
        myCurrentIsBroken = true;
    }
    if (!myCurrentIsBroken) {
        try {
            myJunctionControlBuilder.getTLLogicControlToUse().addWAUTSwitch(myCurrentWAUTID, t, to);
        } catch (InvalidArgument& e) {
            WRITE_ERROR(e.what());
            myCurrentIsBroken = true;
        }
    }
}
Пример #9
0
void
NLHandler::addVTypeProbeDetector(const SUMOSAXAttributes& attrs) {
    bool ok = true;
    std::string id = attrs.get<std::string>(SUMO_ATTR_ID, 0, ok);
    SUMOTime frequency = attrs.getSUMOTimeReporting(SUMO_ATTR_FREQUENCY, id.c_str(), ok);
    std::string type = attrs.getStringSecure(SUMO_ATTR_TYPE, "");
    std::string file = attrs.get<std::string>(SUMO_ATTR_FILE, id.c_str(), ok);
    if (!ok) {
        return;
    }
    try {
        myDetectorBuilder.buildVTypeProbe(id, type, frequency, FileHelpers::checkForRelativity(file, getFileName()));
    } catch (InvalidArgument& e) {
        WRITE_ERROR(e.what());
    } catch (IOError& e) {
        WRITE_ERROR(e.what());
    }
}
Пример #10
0
void
NLHandler::addRouteProbeDetector(const SUMOSAXAttributes& attrs) {
    bool ok = true;
    std::string id = attrs.get<std::string>(SUMO_ATTR_ID, 0, ok);
    SUMOTime frequency = attrs.getSUMOTimeReporting(SUMO_ATTR_FREQUENCY, id.c_str(), ok);
    SUMOTime begin = attrs.getOptSUMOTimeReporting(SUMO_ATTR_BEGIN, id.c_str(), ok, -1);
    std::string edge = attrs.get<std::string>(SUMO_ATTR_EDGE, id.c_str(), ok);
    std::string file = attrs.get<std::string>(SUMO_ATTR_FILE, id.c_str(), ok);
    if (!ok) {
        return;
    }
    try {
        myDetectorBuilder.buildRouteProbe(id, edge, frequency, begin,
                                          FileHelpers::checkForRelativity(file, getFileName()));
    } catch (InvalidArgument& e) {
        WRITE_ERROR(e.what());
    } catch (IOError& e) {
        WRITE_ERROR(e.what());
    }
}
Пример #11
0
void
NLHandler::beginE3Detector(const SUMOSAXAttributes& attrs) {
    bool ok = true;
    std::string id = attrs.get<std::string>(SUMO_ATTR_ID, 0, ok);
    const SUMOTime frequency = attrs.getSUMOTimeReporting(SUMO_ATTR_FREQUENCY, id.c_str(), ok);
    const SUMOTime haltingTimeThreshold = attrs.getOptSUMOTimeReporting(SUMO_ATTR_HALTING_TIME_THRESHOLD, id.c_str(), ok, TIME2STEPS(1));
    const SUMOReal haltingSpeedThreshold = attrs.getOpt<SUMOReal>(SUMO_ATTR_HALTING_SPEED_THRESHOLD, id.c_str(), ok, 5.0f / 3.6f);
    const std::string file = attrs.get<std::string>(SUMO_ATTR_FILE, id.c_str(), ok);
    if (!ok) {
        return;
    }
    try {
        myDetectorBuilder.beginE3Detector(id,
                                          FileHelpers::checkForRelativity(file, getFileName()),
                                          frequency, haltingSpeedThreshold, haltingTimeThreshold);
    } catch (InvalidArgument& e) {
        WRITE_ERROR(e.what());
    } catch (IOError& e) {
        WRITE_ERROR(e.what());
    }
}
Пример #12
0
void
NLHandler::addPhase(const SUMOSAXAttributes& attrs) {
    // try to get the phase definition
    bool ok = true;
    std::string state = attrs.get<std::string>(SUMO_ATTR_STATE, 0, ok);
    if (!ok) {
        return;
    }
    // try to get the phase duration
    SUMOTime duration = attrs.getSUMOTimeReporting(SUMO_ATTR_DURATION, myJunctionControlBuilder.getActiveKey().c_str(), ok);
    if (duration == 0) {
        WRITE_ERROR("Duration of tls-logic '" + myJunctionControlBuilder.getActiveKey() + "/" + myJunctionControlBuilder.getActiveSubKey() + "' is zero.");
        return;
    }
    // if the traffic light is an actuated traffic light, try to get
    //  the minimum and maximum durations
    SUMOTime minDuration = attrs.getOptSUMOTimeReporting(
                               SUMO_ATTR_MINDURATION, myJunctionControlBuilder.getActiveKey().c_str(), ok, duration);
    SUMOTime maxDuration = attrs.getOptSUMOTimeReporting(
                               SUMO_ATTR_MAXDURATION, myJunctionControlBuilder.getActiveKey().c_str(), ok, duration);
    myJunctionControlBuilder.addPhase(duration, state, minDuration, maxDuration);
}
Пример #13
0
void
MSLaneSpeedTrigger::myStartElement(SumoXMLTag element,
                                   const SUMOSAXAttributes &attrs) throw(ProcessError) {
    // check whether the correct tag is read
    if (element!=SUMO_TAG_STEP) {
        return;
    }
    // extract the values
    bool ok = true;
    SUMOTime next = attrs.getSUMOTimeReporting(SUMO_ATTR_TIME, "vss/step", getID().c_str(), ok);
    SUMOReal speed = attrs.getOptSUMORealReporting(SUMO_ATTR_SPEED, "vss/step", getID().c_str(), ok, -1);
    // check the values
    if (next<0) {
        MsgHandler::getErrorInstance()->inform("Wrong time in MSLaneSpeedTrigger in file '" + getFileName() + "'.");
        return;
    }
    if (speed<0) {
        MsgHandler::getErrorInstance()->inform("Wrong speed in MSLaneSpeedTrigger in file '" + getFileName() + "'.");
        return;
    }
    // set the values for the next step as they are valid
    myLoadedSpeeds.push_back(std::make_pair(next, speed));
}
Пример #14
0
void
SUMORouteHandler::myStartElement(int element,
                                 const SUMOSAXAttributes& attrs) {
    switch (element) {
        case SUMO_TAG_VEHICLE:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs);
            break;
        case SUMO_TAG_PERSON:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs, false, false, true);
            break;
        case SUMO_TAG_CONTAINER:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs);
            break;
        case SUMO_TAG_FLOW:
            delete myVehicleParameter;
            myVehicleParameter = SUMOVehicleParserHelper::parseFlowAttributes(attrs, myBeginDefault, myEndDefault);
            break;
        case SUMO_TAG_VTYPE:
            // XXX: Where is this deleted? Delegated to subclasses?! MSRouteHandler takes care of this, in case of RORouteHandler this is not obvious. Consider introduction of a shared_ptr
            myCurrentVType = SUMOVehicleParserHelper::beginVTypeParsing(attrs, getFileName());
            break;
        case SUMO_TAG_VTYPE_DISTRIBUTION:
            openVehicleTypeDistribution(attrs);
            break;
        case SUMO_TAG_ROUTE:
            openRoute(attrs);
            break;
        case SUMO_TAG_ROUTE_DISTRIBUTION:
            openRouteDistribution(attrs);
            break;
        case SUMO_TAG_STOP:
            addStop(attrs);
            break;
        case SUMO_TAG_TRIP: {
            myVehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs, true);
            if (myVehicleParameter->id == "") {
                WRITE_WARNING("Omitting trip ids is deprecated!");
                myVehicleParameter->id = myIdSupplier.getNext();
            }
            myVehicleParameter->parametersSet |= VEHPARS_FORCE_REROUTE;
            myActiveRouteID = "!" + myVehicleParameter->id;
            break;
        }
        case SUMO_TAG_PERSONTRIP:
        case SUMO_TAG_WALK:
            if (attrs.hasAttribute(SUMO_ATTR_EDGES) || attrs.hasAttribute(SUMO_ATTR_ROUTE)) {
                addWalk(attrs);
            } else {
                addPersonTrip(attrs);
            }
            break;
        case SUMO_TAG_INTERVAL: {
            bool ok;
            myBeginDefault = attrs.getSUMOTimeReporting(SUMO_ATTR_BEGIN, 0, ok);
            myEndDefault = attrs.getSUMOTimeReporting(SUMO_ATTR_END, 0, ok);
            break;
        }
        case SUMO_TAG_PARAM:
            addParam(attrs);
            break;
        default:
            // parse embedded car following model information
            if (myCurrentVType != 0) {
                WRITE_WARNING("Defining car following parameters in a nested element is deprecated in vType '" + myCurrentVType->id + "', use attributes instead!");
                SUMOVehicleParserHelper::parseVTypeEmbedded(*myCurrentVType, (SumoXMLTag)element, attrs);
            }
            break;
    }
}
Пример #15
0
void
MSCalibrator::MSCalibrator_FileTriggeredChild::myStartElement(SumoXMLTag element,
        const SUMOSAXAttributes &attrs) throw(ProcessError) {
    if (element==SUMO_TAG_ROUTEDISTELEM) {
        bool ok = true;
        SUMOReal freq = attrs.getSUMORealReporting(SUMO_ATTR_PROB, "calibrator/routedistelem", myParent.getID().c_str(), ok);
        std::string routeStr = attrs.getStringReporting(SUMO_ATTR_ID, "calibrator/routedistelem", myParent.getID().c_str(), ok);
        if (ok) {
            const MSRoute* route = MSRoute::dictionary(routeStr);
            if (route == 0) {
                throw ProcessError("MSTriggeredSource " + myParent.getID() + ": Route '" + routeStr + "' does not exist.");
            }
            if (freq<0) {
                throw ProcessError("MSTriggeredSource " + myParent.getID() + ": Attribute \"probability\" is negative (must not).");
            }
            // Attributes ok, add to routeDist
            myRouteDist.add(freq, route);
        }
        return;
    }
    // vehicle-type distributions
    if (element==SUMO_TAG_VTYPEDISTELEM) {
        // get the id, report an error if not given or empty...
        std::string id;
        if (!attrs.setIDFromAttributes("vtypedistelem", id)) {
            return;
        }
        bool ok = true;
        SUMOReal prob = attrs.getSUMORealReporting(SUMO_ATTR_PROB, "vtypedistelem", id.c_str(), ok);
        if (ok) {
            if (prob<=0) {
                MsgHandler::getErrorInstance()->inform("False probability while parsing calibrator '" + myParent.getID() + "' (" + toString(prob) + ").");
                return;
            }
            MSVehicleType *vtype = MSNet::getInstance()->getVehicleControl().getVType(id);
            if (vtype==0) {
                MsgHandler::getErrorInstance()->inform("Unknown vtype-object '" + id + "'.");
                return;
            }
            myVTypeDist.add(prob, vtype);
        }
    }

    if (element==SUMO_TAG_FLOW) {
        bool ok = true;
        SUMOReal no = attrs.getSUMORealReporting(SUMO_ATTR_NO, "flow", myParent.getID().c_str(), ok);
        if (no<0) {
            MsgHandler::getErrorInstance()->inform("Negative flow in calibrator '" + myParent.getID() + "'.");
            return;
        }
        SUMOTime end = attrs.getOptSUMOTimeReporting(SUMO_ATTR_END, "flow", myParent.getID().c_str(), ok, -1);
        if (!ok) {
            return;
        }
        myFlow = (SUMOReal) no;
        if (end==-1||end>=MSNet::getInstance()->getCurrentTimeStep()) {
            if (myFlow>0) {
                buildAndScheduleFlowVehicle();
                MSNet::getInstance()->getEmissionEvents().addEvent(
                    new WrappingCommand<MSCalibrator::MSCalibrator_FileTriggeredChild>(this, &MSCalibrator::MSCalibrator_FileTriggeredChild::execute),
                    (SUMOTime)(1. / (myFlow / 3600.))+MSNet::getInstance()->getCurrentTimeStep(),
                    MSEventControl::ADAPT_AFTER_EXECUTION);
                myHaveInitialisedFlow = true;
            }
        }
    }

    // check whethe the correct tag is read
    if (element==SUMO_TAG_EMIT) {
        bool ok = true;
        SUMOTime depart = attrs.getSUMOTimeReporting(SUMO_ATTR_TIME, "emit", 0, ok);
        SUMOReal departSpeed = attrs.getOptSUMORealReporting(SUMO_ATTR_SPEED, "emit", myParent.getID().c_str(), ok, -1);
        if (!ok) {
            return;
        }
        if (depart<myBeginTime) {
            // do not process the vehicle if the emission time is before the simulation begin
            return;
        }

        SUMOVehicleParameter* pars = new SUMOVehicleParameter();
        pars->repetitionNumber = -1;
        pars->repetitionOffset = -1;
        pars->depart = depart;
        pars->departSpeed = departSpeed;
        // check and assign id
        pars->id = attrs.getStringSecure(SUMO_ATTR_ID, "");
        if (myVehicleControl.getVehicle(pars->id)!=0) {
            WRITE_WARNING("MSTriggeredSource " + myParent.getID()+ ": Vehicle " + pars->id + " already exists.\n Generating a default id.");
            pars->id = "";
        }
        if (pars->id=="") {
            pars->id = myParent.getID() +  "_" + toString(pars->depart) +  "_" + toString(myRunningID++);
            if (myVehicleControl.getVehicle(pars->id)!=0) {
                WRITE_WARNING("MSTriggeredSource " + myParent.getID()+ ": Vehicle " + pars->id + " already exists.\n Continuing with next element.");
                return;
            }
        }
        // check and assign vehicle type
        pars->vtypeid = attrs.getStringReporting(SUMO_ATTR_TYPE, "calibrator/routedistelem", myParent.getID().c_str(), ok, "");
        MSVehicleType* aVehType = MSNet::getInstance()->getVehicleControl().getVType(pars->vtypeid);
        if (aVehType == 0) {
            if (myVTypeDist.getOverallProb()!=0) {
                aVehType = myVTypeDist.get();
            }
            if (aVehType==0) {
                aVehType = MSNet::getInstance()->getVehicleControl().getVType();
                if (aVehType==0) {
                    WRITE_WARNING("MSTriggeredSource " + myParent.getID()+ ": no valid vehicle type exists.\n Continuing with next element.");
                    return;
                }
            }
        }
        // check and assign vehicle type
        pars->routeid = attrs.getStringReporting(SUMO_ATTR_ROUTE, "calibrator/routedistelem", myParent.getID().c_str(), ok, "");
        const MSRoute *aEmitRoute = MSRoute::dictionary(pars->routeid);
        if (aEmitRoute==0) {
            if (myRouteDist.getOverallProb()!=0) {
                aEmitRoute = myRouteDist.get();
            }
            if (aEmitRoute==0) {
                WRITE_WARNING("MSTriggeredSource " + myParent.getID()+ ": no valid route exsists.");
                WRITE_WARNING("Continuing with next element.");
                return;
            }
        }
        // build vehicle
        MSVehicle *veh = MSNet::getInstance()->getVehicleControl().buildVehicle(pars, aEmitRoute, aVehType);
        myParent.schedule(this, veh, pars->departSpeed);
        myHaveNext = true;
        myOffset = SUMOTime(pars->depart);
    }
    // check whethe the correct tag is read
    if (element==SUMO_TAG_RESET) {
        myVTypeDist.clear();
        myRouteDist.clear();
    }
#if 0
#ifdef TM_CALIB
    if (element==SUMO_TAG_CALIB) {

        WRITE_WARNING("FOUND calib Tag!!!");
        /*
        		  MSNet::getInstance()->getEmissionEvents().addEvent(
                            new WrappingCommand<MSCalibrator::MSCalibrator_FileTriggeredChild>(this, &MSCalibrator::MSCalibrator_FileTriggeredChild::execute2),
                            //MSNet::getInstance()->getCurrentTimeStep() + 5,
        					10,
                            MSEventControl::ADAPT_AFTER_EXECUTION);
        */

    }
#endif //TM_CALIB
#endif //0
}
Пример #16
0
void
MSCalibrator::myStartElement(int element,
                             const SUMOSAXAttributes& attrs) {
    if (element == SUMO_TAG_FLOW) {
        AspiredState state;
        SUMOTime lastEnd = -1;
        if (myIntervals.size() > 0) {
            lastEnd = myIntervals.back().end;
            if (lastEnd == -1) {
                lastEnd = myIntervals.back().begin;
            }
        }
        try {
            bool ok = true;
            state.q = attrs.getOpt<double>(SUMO_ATTR_VEHSPERHOUR, nullptr, ok, -1.);
            state.v = attrs.getOpt<double>(SUMO_ATTR_SPEED, nullptr, ok, -1.);
            state.begin = attrs.getSUMOTimeReporting(SUMO_ATTR_BEGIN, myID.c_str(), ok);
            if (state.begin < lastEnd) {
                WRITE_ERROR("Overlapping or unsorted intervals in calibrator '" + myID + "'.");
            }
            state.end = attrs.getOptSUMOTimeReporting(SUMO_ATTR_END, myID.c_str(), ok, -1);
            state.vehicleParameter = SUMOVehicleParserHelper::parseVehicleAttributes(attrs, true, true);
            LeftoverVehicleParameters.push_back(state.vehicleParameter);
            // vehicles should be inserted with max speed unless stated otherwise
            if (state.vehicleParameter->departSpeedProcedure == DEPART_SPEED_DEFAULT) {
                state.vehicleParameter->departSpeedProcedure = DEPART_SPEED_MAX;
            }
            // vehicles should be inserted on any lane unless stated otherwise
            if (state.vehicleParameter->departLaneProcedure == DEPART_LANE_DEFAULT) {
                if (myLane == nullptr) {
                    state.vehicleParameter->departLaneProcedure = DEPART_LANE_ALLOWED_FREE;
                } else {
                    state.vehicleParameter->departLaneProcedure = DEPART_LANE_GIVEN;
                    state.vehicleParameter->departLane = myLane->getIndex();
                }
            } else if (myLane != nullptr && (
                           state.vehicleParameter->departLaneProcedure != DEPART_LANE_GIVEN
                           || state.vehicleParameter->departLane != myLane->getIndex())) {
                WRITE_WARNING("Insertion lane may differ from calibrator lane for calibrator '" + getID() + "'.");
            }
            if (state.vehicleParameter->vtypeid != DEFAULT_VTYPE_ID &&
                    MSNet::getInstance()->getVehicleControl().getVType(state.vehicleParameter->vtypeid) == nullptr) {
                WRITE_ERROR("Unknown vehicle type '" + state.vehicleParameter->vtypeid + "' in calibrator '" + myID + "'.");
            }
        } catch (EmptyData&) {
            WRITE_ERROR("Mandatory attribute missing in definition of calibrator '" + myID + "'.");
        } catch (NumberFormatException&) {
            WRITE_ERROR("Non-numeric value for numeric attribute in definition of calibrator '" + myID + "'.");
        }
        if (state.q < 0 && state.v < 0) {
            WRITE_ERROR("Either 'vehsPerHour' or 'speed' has to be given in flow definition of calibrator '" + myID + "'.");
        }
        if (myIntervals.size() > 0 && myIntervals.back().end == -1) {
            myIntervals.back().end = state.begin;
        }
        myIntervals.push_back(state);
        myCurrentStateInterval = myIntervals.begin();
    } else {
        MSRouteHandler::myStartElement(element, attrs);
    }
}
Пример #17
0
void
GUISettingsHandler::myStartElement(int element,
                                   const SUMOSAXAttributes& attrs) {
    bool ok = true;
    switch (element) {
        case SUMO_TAG_BREAKPOINTS_FILE: {
            std::string file = attrs.get<std::string>(SUMO_ATTR_VALUE, nullptr, ok);
            myBreakpoints = loadBreakpoints(file);
        }
        break;
        case SUMO_TAG_BREAKPOINT:
            myBreakpoints.push_back(attrs.getSUMOTimeReporting(SUMO_ATTR_VALUE, nullptr, ok));
            break;
        case SUMO_TAG_VIEWSETTINGS:
            myViewType = attrs.getOpt<std::string>(SUMO_ATTR_TYPE, nullptr, ok, "default");
            std::transform(myViewType.begin(), myViewType.end(), myViewType.begin(), tolower);
            break;
        case SUMO_TAG_DELAY:
            myDelay = attrs.getOpt<double>(SUMO_ATTR_VALUE, nullptr, ok, myDelay);
            break;
        case SUMO_TAG_VIEWPORT: {
            const double x = attrs.getOpt<double>(SUMO_ATTR_X, nullptr, ok, myLookFrom.x());
            const double y = attrs.getOpt<double>(SUMO_ATTR_Y, nullptr, ok, myLookFrom.y());
            const double z = attrs.getOpt<double>(SUMO_ATTR_ZOOM, nullptr, ok, myLookFrom.z());
            myLookFrom.set(x, y, z);
            const double cx = attrs.getOpt<double>(SUMO_ATTR_CENTER_X, nullptr, ok, myLookAt.x());
            const double cy = attrs.getOpt<double>(SUMO_ATTR_CENTER_Y, nullptr, ok, myLookAt.y());
            const double cz = attrs.getOpt<double>(SUMO_ATTR_CENTER_Z, nullptr, ok, myLookAt.z());
            myLookAt.set(cx, cy, cz);
            myRotation = attrs.getOpt<double>(SUMO_ATTR_ANGLE, nullptr, ok, myRotation);
            break;
        }
        case SUMO_TAG_SNAPSHOT: {
            bool ok = true;
            std::string file = attrs.get<std::string>(SUMO_ATTR_FILE, nullptr, ok);
            if (file != "" && !FileHelpers::isAbsolute(file)) {
                file = FileHelpers::getConfigurationRelative(getFileName(), file);
            }
            mySnapshots[attrs.getOptSUMOTimeReporting(SUMO_ATTR_TIME, file.c_str(), ok, 0)].push_back(file);
        }
        break;
        case SUMO_TAG_VIEWSETTINGS_SCHEME: {
            bool ok = true;
            mySettings.name = attrs.getOpt<std::string>(SUMO_ATTR_NAME, nullptr, ok, mySettings.name);
            if (gSchemeStorage.contains(mySettings.name)) {
                mySettings = gSchemeStorage.get(mySettings.name);
            }
        }
        break;
        case SUMO_TAG_VIEWSETTINGS_OPENGL:
            mySettings.dither = StringUtils::toBool(attrs.getStringSecure("dither", toString(mySettings.dither)));
            mySettings.fps = StringUtils::toBool(attrs.getStringSecure("fps", toString(mySettings.fps)));
            mySettings.drawBoundaries = StringUtils::toBool(attrs.getStringSecure("drawBoundaries", toString(mySettings.drawBoundaries)));
            mySettings.forceDrawForSelecting = StringUtils::toBool(attrs.getStringSecure("forceDrawForSelecting", toString(mySettings.forceDrawForSelecting)));
            break;
        case SUMO_TAG_VIEWSETTINGS_BACKGROUND: {
            bool ok = true;
            mySettings.backgroundColor = RGBColor::parseColorReporting(attrs.getStringSecure("backgroundColor", toString(mySettings.backgroundColor)), "background", nullptr, true, ok);
            mySettings.showGrid = StringUtils::toBool(attrs.getStringSecure("showGrid", toString(mySettings.showGrid)));
            mySettings.gridXSize = StringUtils::toDouble(attrs.getStringSecure("gridXSize", toString(mySettings.gridXSize)));
            mySettings.gridYSize = StringUtils::toDouble(attrs.getStringSecure("gridYSize", toString(mySettings.gridYSize)));
        }
        break;
        case SUMO_TAG_VIEWSETTINGS_EDGES: {
            int laneEdgeMode = StringUtils::toInt(attrs.getStringSecure("laneEdgeMode", "0"));
            int laneEdgeScaleMode = StringUtils::toInt(attrs.getStringSecure("scaleMode", "0"));
            mySettings.laneShowBorders = StringUtils::toBool(attrs.getStringSecure("laneShowBorders", toString(mySettings.laneShowBorders)));
            mySettings.showBikeMarkings = StringUtils::toBool(attrs.getStringSecure("showBikeMarkings", toString(mySettings.showBikeMarkings)));
            mySettings.showLinkDecals = StringUtils::toBool(attrs.getStringSecure("showLinkDecals", toString(mySettings.showLinkDecals)));
            mySettings.showLinkRules = StringUtils::toBool(attrs.getStringSecure("showLinkRules", toString(mySettings.showLinkRules)));
            mySettings.showRails = StringUtils::toBool(attrs.getStringSecure("showRails", toString(mySettings.showRails)));
            mySettings.edgeName = parseTextSettings("edgeName", attrs, mySettings.edgeName);
            mySettings.internalEdgeName = parseTextSettings("internalEdgeName", attrs, mySettings.internalEdgeName);
            mySettings.cwaEdgeName = parseTextSettings("cwaEdgeName", attrs, mySettings.cwaEdgeName);
            mySettings.streetName = parseTextSettings("streetName", attrs, mySettings.streetName);
            mySettings.edgeValue = parseTextSettings("edgeValue", attrs, mySettings.edgeValue);
            mySettings.hideConnectors = StringUtils::toBool(attrs.getStringSecure("hideConnectors", toString(mySettings.hideConnectors)));
            mySettings.laneWidthExaggeration = StringUtils::toDouble(attrs.getStringSecure("widthExaggeration", toString(mySettings.laneWidthExaggeration)));
            mySettings.laneMinSize = StringUtils::toDouble(attrs.getStringSecure("minSize", toString(mySettings.laneWidthExaggeration)));
            mySettings.showLaneDirection = StringUtils::toBool(attrs.getStringSecure("showDirection", toString(mySettings.showLaneDirection)));
            mySettings.showSublanes = StringUtils::toBool(attrs.getStringSecure("showSublanes", toString(mySettings.showSublanes)));
            mySettings.spreadSuperposed = StringUtils::toBool(attrs.getStringSecure("spreadSuperposed", toString(mySettings.spreadSuperposed)));
            mySettings.edgeParam = attrs.getStringSecure("edgeParam", mySettings.edgeParam);
            mySettings.laneParam = attrs.getStringSecure("laneParam", mySettings.laneParam);
            mySettings.edgeData = attrs.getStringSecure("edgeData", mySettings.edgeData);
            myCurrentColorer = element;
            mySettings.edgeColorer.setActive(laneEdgeMode);
            mySettings.edgeScaler.setActive(laneEdgeScaleMode);
            mySettings.laneColorer.setActive(laneEdgeMode);
            mySettings.laneScaler.setActive(laneEdgeScaleMode);
        }
        break;
        case SUMO_TAG_COLORSCHEME:
            myCurrentScheme = nullptr;
            myCurrentScaleScheme = nullptr;
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_EDGES) {
                myCurrentScheme = mySettings.laneColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
                if (myCurrentScheme == nullptr) {
                    myCurrentScheme = mySettings.edgeColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
                }
            }
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_VEHICLES) {
                myCurrentScheme = mySettings.vehicleColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
            }
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_PERSONS) {
                myCurrentScheme = mySettings.personColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
            }
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_JUNCTIONS) {
                myCurrentScheme = mySettings.junctionColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
            }
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_POIS) {
                myCurrentScheme = mySettings.poiColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
            }
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_POLYS) {
                myCurrentScheme = mySettings.polyColorer.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
            }
            if (myCurrentScheme && !myCurrentScheme->isFixed()) {
                bool ok = true;
                myCurrentScheme->setInterpolated(attrs.getOpt<bool>(SUMO_ATTR_INTERPOLATED, nullptr, ok, false));
                myCurrentScheme->clear();
            }
            break;
        case SUMO_TAG_SCALINGSCHEME:
            myCurrentScheme = nullptr;
            myCurrentScaleScheme = nullptr;
            if (myCurrentColorer == SUMO_TAG_VIEWSETTINGS_EDGES) {
                myCurrentScaleScheme = mySettings.laneScaler.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
                if (myCurrentScaleScheme == nullptr) {
                    myCurrentScaleScheme = mySettings.edgeScaler.getSchemeByName(attrs.getStringSecure(SUMO_ATTR_NAME, ""));
                }
            }
            if (myCurrentScaleScheme && !myCurrentScaleScheme->isFixed()) {
                bool ok = true;
                myCurrentScaleScheme->setInterpolated(attrs.getOpt<bool>(SUMO_ATTR_INTERPOLATED, nullptr, ok, false));
                myCurrentScaleScheme->clear();
            }
            break;

        case SUMO_TAG_ENTRY:
            if (myCurrentScheme != nullptr) {
                bool ok = true;
                RGBColor color = attrs.get<RGBColor>(SUMO_ATTR_COLOR, nullptr, ok);
                if (myCurrentScheme->isFixed()) {
                    myCurrentScheme->setColor(attrs.getStringSecure(SUMO_ATTR_NAME, ""), color);
                } else {
                    myCurrentScheme->addColor(color, attrs.getOpt<double>(SUMO_ATTR_THRESHOLD, nullptr, ok, 0));
                }
            } else if (myCurrentScaleScheme != nullptr) {
                bool ok = true;
                double scale = attrs.get<double>(SUMO_ATTR_COLOR, nullptr, ok);
                if (myCurrentScaleScheme->isFixed()) {
                    myCurrentScaleScheme->setColor(attrs.getStringSecure(SUMO_ATTR_NAME, ""), scale);
                } else {
                    myCurrentScaleScheme->addColor(scale, attrs.getOpt<double>(SUMO_ATTR_THRESHOLD, nullptr, ok, 0));
                }
            }
            break;
        case SUMO_TAG_VIEWSETTINGS_VEHICLES:
            mySettings.vehicleColorer.setActive(StringUtils::toInt(attrs.getStringSecure("vehicleMode", "0")));
            mySettings.vehicleQuality = StringUtils::toInt(attrs.getStringSecure("vehicleQuality", toString(mySettings.vehicleQuality)));
            mySettings.showBlinker = StringUtils::toBool(attrs.getStringSecure("showBlinker", toString(mySettings.showBlinker)));
            mySettings.drawMinGap = StringUtils::toBool(attrs.getStringSecure("drawMinGap", toString(mySettings.drawMinGap)));
            mySettings.vehicleSize = parseSizeSettings("vehicle", attrs, mySettings.vehicleSize);
            mySettings.vehicleName = parseTextSettings("vehicleName", attrs, mySettings.vehicleName);
            mySettings.vehicleValue = parseTextSettings("vehicleValue", attrs, mySettings.vehicleValue);
            myCurrentColorer = element;
            break;
        case SUMO_TAG_VIEWSETTINGS_PERSONS:
            mySettings.personColorer.setActive(StringUtils::toInt(attrs.getStringSecure("personMode", "0")));
            mySettings.personQuality = StringUtils::toInt(attrs.getStringSecure("personQuality", toString(mySettings.personQuality)));
            mySettings.personSize = parseSizeSettings("person", attrs, mySettings.personSize);
            mySettings.personName = parseTextSettings("personName", attrs, mySettings.personName);
            mySettings.personValue = parseTextSettings("personValue", attrs, mySettings.personValue);
            myCurrentColorer = element;
            break;
        case SUMO_TAG_VIEWSETTINGS_CONTAINERS:
            mySettings.containerColorer.setActive(StringUtils::toInt(attrs.getStringSecure("containerMode", "0")));
            mySettings.containerQuality = StringUtils::toInt(attrs.getStringSecure("containerQuality", toString(mySettings.containerQuality)));
            mySettings.containerSize = parseSizeSettings("container", attrs, mySettings.containerSize);
            mySettings.containerName = parseTextSettings("containerName", attrs, mySettings.containerName);
            myCurrentColorer = element;
            break;
        case SUMO_TAG_VIEWSETTINGS_JUNCTIONS:
            mySettings.junctionColorer.setActive(StringUtils::toInt(attrs.getStringSecure("junctionMode", "0")));
            mySettings.drawLinkTLIndex = parseTextSettings("drawLinkTLIndex", attrs, mySettings.drawLinkTLIndex);
            mySettings.drawLinkJunctionIndex = parseTextSettings("drawLinkJunctionIndex", attrs, mySettings.drawLinkJunctionIndex);
            mySettings.junctionName = parseTextSettings("junctionName", attrs, mySettings.junctionName);
            mySettings.internalJunctionName = parseTextSettings("internalJunctionName", attrs, mySettings.internalJunctionName);
            mySettings.tlsPhaseIndex = parseTextSettings("tlsPhaseIndex", attrs, mySettings.tlsPhaseIndex);
            mySettings.showLane2Lane = StringUtils::toBool(attrs.getStringSecure("showLane2Lane", toString(mySettings.showLane2Lane)));
            mySettings.drawJunctionShape = StringUtils::toBool(attrs.getStringSecure("drawShape", toString(mySettings.drawJunctionShape)));
            mySettings.drawCrossingsAndWalkingareas = StringUtils::toBool(attrs.getStringSecure(
                        "drawCrossingsAndWalkingareas", toString(mySettings.drawCrossingsAndWalkingareas)));
            mySettings.junctionSize = parseSizeSettings("junction", attrs, mySettings.junctionSize);
            myCurrentColorer = element;
            break;
        case SUMO_TAG_VIEWSETTINGS_ADDITIONALS:
            mySettings.addMode = StringUtils::toInt(attrs.getStringSecure("addMode", toString(mySettings.addMode)));
            mySettings.addSize = parseSizeSettings("add", attrs, mySettings.addSize);
            mySettings.addName = parseTextSettings("addName", attrs, mySettings.addName);
            mySettings.addFullName = parseTextSettings("addFullName", attrs, mySettings.addFullName);
            break;
        case SUMO_TAG_VIEWSETTINGS_POIS:
            mySettings.poiSize = parseSizeSettings("poi", attrs, mySettings.poiSize);
            mySettings.poiName = parseTextSettings("poiName", attrs, mySettings.poiName);
            mySettings.poiType = parseTextSettings("poiType", attrs, mySettings.poiType);
            mySettings.poiColorer.setActive(StringUtils::toInt(attrs.getStringSecure("personMode", "0")));
            myCurrentColorer = element;
            break;
        case SUMO_TAG_VIEWSETTINGS_POLYS:
            mySettings.polySize = parseSizeSettings("poly", attrs, mySettings.polySize);
            mySettings.polyName = parseTextSettings("polyName", attrs, mySettings.polyName);
            mySettings.polyType = parseTextSettings("polyType", attrs, mySettings.polyType);
            mySettings.polyColorer.setActive(StringUtils::toInt(attrs.getStringSecure("personMode", "0")));
            myCurrentColorer = element;
            break;
        case SUMO_TAG_VIEWSETTINGS_LEGEND:
            mySettings.showSizeLegend = StringUtils::toBool(attrs.getStringSecure("showSizeLegend", toString(mySettings.showSizeLegend)));
            break;
        case SUMO_TAG_VIEWSETTINGS_DECAL: {
            GUISUMOAbstractView::Decal d;
            d.filename = attrs.getStringSecure("filename", d.filename);
            if (d.filename != "" && !FileHelpers::isAbsolute(d.filename)) {
                d.filename = FileHelpers::getConfigurationRelative(getFileName(), d.filename);
            }
            d.centerX = attrs.getOpt<double>(SUMO_ATTR_CENTER_X, nullptr, ok, d.centerX);
            d.centerY = attrs.getOpt<double>(SUMO_ATTR_CENTER_Y, nullptr, ok, d.centerY);
            d.centerZ = attrs.getOpt<double>(SUMO_ATTR_CENTER_Z, nullptr, ok, d.centerZ);
            d.width = attrs.getOpt<double>(SUMO_ATTR_WIDTH, nullptr, ok, d.width);
            d.height = attrs.getOpt<double>(SUMO_ATTR_HEIGHT, nullptr, ok, d.height);
            d.altitude = StringUtils::toDouble(attrs.getStringSecure("altitude", toString(d.height)));
            d.rot = StringUtils::toDouble(attrs.getStringSecure("rotation", toString(d.rot)));
            d.tilt = StringUtils::toDouble(attrs.getStringSecure("tilt", toString(d.tilt)));
            d.roll = StringUtils::toDouble(attrs.getStringSecure("roll", toString(d.roll)));
            d.layer = attrs.getOpt<double>(SUMO_ATTR_LAYER, nullptr, ok, d.layer);
            d.screenRelative = StringUtils::toBool(attrs.getStringSecure("screenRelative", toString(d.screenRelative)));
            d.initialised = false;
            myDecals.push_back(d);
        }
        break;
        case SUMO_TAG_VIEWSETTINGS_LIGHT: {
            GUISUMOAbstractView::Decal d;
            d.filename = "light" + attrs.getOpt<std::string>(SUMO_ATTR_INDEX, nullptr, ok, "0");
            d.centerX = attrs.getOpt<double>(SUMO_ATTR_CENTER_X, nullptr, ok, d.centerX);
            d.centerY = attrs.getOpt<double>(SUMO_ATTR_CENTER_Y, nullptr, ok, d.centerY);
            d.centerZ = attrs.getOpt<double>(SUMO_ATTR_CENTER_Z, nullptr, ok, d.centerZ);
            d.width = attrs.getOpt<double>(SUMO_ATTR_WIDTH, nullptr, ok, d.width);
            d.height = attrs.getOpt<double>(SUMO_ATTR_HEIGHT, nullptr, ok, d.height);
            d.altitude = StringUtils::toDouble(attrs.getStringSecure("altitude", toString(d.height)));
            d.rot = StringUtils::toDouble(attrs.getStringSecure("rotation", toString(d.rot)));
            d.tilt = StringUtils::toDouble(attrs.getStringSecure("tilt", toString(d.tilt)));
            d.roll = StringUtils::toDouble(attrs.getStringSecure("roll", toString(d.roll)));
            d.layer = attrs.getOpt<double>(SUMO_ATTR_LAYER, nullptr, ok, d.layer);
            d.initialised = false;
            myDecals.push_back(d);
        }
        break;
        case SUMO_TAG_VIEWSETTINGS_EVENT: {
            const std::string id = attrs.get<std::string>(SUMO_ATTR_ID, nullptr, ok);
            const std::string cmd = attrs.get<std::string>(SUMO_ATTR_COMMAND, nullptr, ok);
            const double prob = attrs.get<double>(SUMO_ATTR_PROB, id.c_str(), ok);
            myEventDistributions[id].add(cmd, prob);
        }
        break;
        case SUMO_TAG_VIEWSETTINGS_EVENT_JAM_TIME:
            myJamSoundTime = attrs.get<double>(SUMO_ATTR_VALUE, nullptr, ok);
            break;
        default:
            break;
    }
}