// Redraw the moved node according to the mouse cursor position
static void Show_MoveNode( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*) aPanel->GetDisplayOptions();
wxPoint moveVector;
int tmp = displ_opts->m_DisplayPcbTrackFill;
GR_DRAWMODE draw_mode = GR_XOR | GR_HIGHLIGHT;
displ_opts->m_DisplayPcbTrackFill = false;
#ifndef USE_WX_OVERLAY
aErase = true;
#else
aErase = false;
#endif
// set the new track coordinates
wxPoint Pos = aPanel->GetParent()->GetCrossHairPosition();
moveVector = Pos - s_LastPos;
s_LastPos = Pos;
TRACK *track = NULL;
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
track = g_DragSegmentList[ii].m_Track;
if( aErase )
track->Draw( aPanel, aDC, draw_mode );
if( track->GetFlags() & STARTPOINT )
track->SetStart( track->GetStart() + moveVector );
if( track->GetFlags() & ENDPOINT )
track->SetEnd( track->GetEnd() + moveVector );
if( track->Type() == PCB_VIA_T )
track->SetEnd( track->GetStart() );
track->Draw( aPanel, aDC, draw_mode );
}
displ_opts->m_DisplayPcbTrackFill = tmp;
// Display track length
if( track )
{
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
frame->SetMsgPanel( track );
}
}
void PNS_KICAD_IFACE::AddItem( PNS::ITEM* aItem )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( aItem->Kind() )
{
case PNS::ITEM::SEGMENT_T:
{
PNS::SEGMENT* seg = static_cast<PNS::SEGMENT*>( aItem );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS::ITEM::VIA_T:
{
VIA* via_board = new VIA( m_board );
PNS::VIA* via = static_cast<PNS::VIA*>( aItem );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
aItem->SetParent( newBI );
newBI->ClearFlags();
m_commit->Add( newBI );
}
}
TRACK* SPECCTRA_DB::makeTRACK( PATH* aPath, int aPointIndex, int aNetcode ) throw( IO_ERROR )
{
int layerNdx = findLayerName( aPath->layer_id );
if( layerNdx == -1 )
{
wxString layerName = FROM_UTF8( aPath->layer_id.c_str() );
THROW_IO_ERROR( wxString::Format( _("Session file uses invalid layer id \"%s\""),
GetChars( layerName ) ) );
}
TRACK* track = new TRACK( sessionBoard );
track->SetStart( mapPt( aPath->points[aPointIndex+0], routeResolution ) );
track->SetEnd( mapPt( aPath->points[aPointIndex+1], routeResolution ) );
track->SetLayer( pcbLayer2kicad[layerNdx] );
track->SetWidth( scale( aPath->aperture_width, routeResolution ) );
track->SetNetCode( aNetcode );
return track;
}
/* drawing the track segment movement
* > s_MovingSegmentSlope slope = moving track segment slope
* > s_StartSegmentSlope slope = slope of the segment connected to the start
* point of the moving segment
* > s_EndSegmentSlope slope = slope of the segment connected to the end point
* of the moving segment
*
* moved segment function :
* yt=s_MovingSegmentSlope * x + s_MovingSegment_Yorg
*
* segment connected to moved segment's start:
* y1 = s_StartSegmentSlope * x + s_StartSegment_Yorg
*
* segment connected to moved segment's end:
* y2=s_EndSegmentSlope * x + s_EndSegment_Yorg
*
* first intersection point will be located at
* y1=yt ->
*
* xi1=(s_MovingSegment_Yorg-s_StartSegment_Yorg)/(s_StartSegmentSlope-s_MovingSegmentSlope)
* yi1=s_MovingSegmentSlope*xi1+s_MovingSegment_Yorg
* or yi1=s_StartSegmentSlope*xi1+s_MovingSegment_Yorg
*
* second intersection point
* y2=yt ->
*
* xi2=(s_MovingSegment_Yorg-s_StartSegment_Yorg)/(s_MovingSegmentSlope-s_MovingSegmentSlope)
* yi2=s_MovingSegmentSlope*xi2+s_MovingSegment_Yorg
* or yi1=s_EndSegmentSlope*xi2+s_MovingSegment_Yorg
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! special attention to vertical segments because
* !!!!! their slope=infinite
* !!!!! intersection point will be calculated using the
* !!!!! segment intersecting it
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
*
* Slope parameters are computed once, because they can become undetermined
* when moving segments
* (i.e. when a segment length is 0) and we want keep them constant
*/
static void Show_Drag_Track_Segment_With_Cte_Slope( EDA_DRAW_PANEL* aPanel, wxDC* aDC,
const wxPoint& aPosition, bool aErase )
{
double xi1 = 0, yi1 = 0, xi2 = 0, yi2 = 0; // calculated intersection points
double tx1, tx2, ty1, ty2; // temporary storage of points
int dx, dy;
bool update = true;
TRACK* Track;
TRACK* tSegmentToStart = NULL, * tSegmentToEnd = NULL;
if( g_DragSegmentList.size() == 0 )
return;
/* get the segments :
* from last to first in list are:
* the segment to move
* the segment connected to its end point (if exists)
* the segment connected to its start point (if exists)
*/
int ii = g_DragSegmentList.size() - 1;
Track = g_DragSegmentList[ii].m_Track;
if( Track == NULL )
return;
ii--;
if( ii >= 0)
{
if( s_EndSegmentPresent )
{
// Get the segment connected to the end point
tSegmentToEnd = g_DragSegmentList[ii].m_Track;
ii--;
}
if( s_StartSegmentPresent )
{
// Get the segment connected to the start point
if( ii >= 0 )
tSegmentToStart = g_DragSegmentList[ii].m_Track;
}
}
GR_DRAWMODE draw_mode = GR_XOR | GR_HIGHLIGHT;
// Undraw the current moved track segments before modification
#ifndef USE_WX_OVERLAY
// if( erase )
{
Track->Draw( aPanel, aDC, draw_mode );
if( tSegmentToStart )
tSegmentToStart->Draw( aPanel, aDC, draw_mode );
if( tSegmentToEnd )
tSegmentToEnd->Draw( aPanel, aDC, draw_mode );
}
#endif
// Compute the new track segment position
wxPoint Pos = aPanel->GetParent()->GetCrossHairPosition();
dx = Pos.x - s_LastPos.x;
dy = Pos.y - s_LastPos.y;
// move the line by dx and dy
tx1 = (double) ( Track->GetStart().x + dx );
ty1 = (double) ( Track->GetStart().y + dy );
tx2 = (double) ( Track->GetEnd().x + dx );
ty2 = (double) ( Track->GetEnd().y + dy );
// recalculate the segments new parameters and intersection points
// only the intercept will change, segment slopes does not change
// because we are moving parallel with is initial state
if( !s_MovingSegmentVertical )
{
s_MovingSegment_Yorg = ty1 - ( s_MovingSegmentSlope * tx1 );
}
if( ( !s_EndPointVertical ) && ( !s_MovingSegmentVertical ) )
{
xi2 = ( s_MovingSegment_Yorg - s_EndSegment_Yorg )
/ ( s_EndSegmentSlope - s_MovingSegmentSlope );
}
else
{
if( !s_EndPointVertical )
{
xi2 = tx2;
}
else
{
//P1=P2
if( !s_EndPointHorizontal )
{
xi2 = tx2 - dx;
}
else
{
update = false;
}
}
}
if( !s_MovingSegmentVertical )
{
yi2 = s_MovingSegmentSlope * ( xi2 ) + s_MovingSegment_Yorg;
}
else
{
if( !s_EndPointVertical )
{
yi2 = s_EndSegmentSlope * ( xi2 ) + s_EndSegment_Yorg;
}
else
{
if( !s_EndPointHorizontal )
{
update = false;
}
else
{
yi2 = s_MovingSegmentSlope * ( xi2 ) + s_MovingSegment_Yorg;
}
}
}
if( ( !s_StartPointVertical ) && ( !s_MovingSegmentVertical ) )
{
xi1 = ( s_MovingSegment_Yorg - s_StartSegment_Yorg )
/ ( s_StartSegmentSlope - s_MovingSegmentSlope );
}
else
{
if( !s_StartPointVertical )
{
xi1 = tx1;
}
else
{
//P1=P2
if( !s_StartPointHorizontal )
{
xi1 = tx1 - dx;
}
else
{
if( !s_StartPointHorizontal )
{
update = false;
}
}
}
}
if( !s_MovingSegmentVertical )
{
yi1 = s_MovingSegmentSlope * ( xi1 ) + s_MovingSegment_Yorg;
}
else
{
if( !s_StartPointVertical )
{
yi1 = s_StartSegmentSlope * ( xi1 ) + s_StartSegment_Yorg;
}
else
{
if( !s_StartPointHorizontal )
{
update = false;
}
else
{
yi2 = s_MovingSegmentSlope * ( xi1 ) + s_MovingSegment_Yorg;
}
}
}
// update the segment coordinates (if possible)
if( tSegmentToStart == NULL )
{
xi1 = tx1;
yi1 = ty1;
}
if( tSegmentToEnd == NULL )
{
xi2 = tx2;
yi2 = ty2;
}
if( update )
{
s_LastPos = Pos;
Track->SetStart( wxPoint( KiROUND( xi1 ), KiROUND( yi1 ) ) );
Track->SetEnd( wxPoint( KiROUND( xi2 ), KiROUND( yi2 ) ) );
if( tSegmentToEnd )
{
if( tSegmentToEnd->GetFlags() & STARTPOINT )
tSegmentToEnd->SetStart( Track->GetEnd() );
else
tSegmentToEnd->SetEnd( Track->GetEnd() );
}
if( tSegmentToStart )
{
if( tSegmentToStart->GetFlags() & STARTPOINT )
tSegmentToStart->SetStart( Track->GetStart() );
else
tSegmentToStart->SetEnd( Track->GetStart() );
}
}
Track->Draw( aPanel, aDC, draw_mode );
if( tSegmentToStart )
tSegmentToStart->Draw( aPanel, aDC, draw_mode );
if( tSegmentToEnd )
tSegmentToEnd->Draw( aPanel, aDC, draw_mode );
// Display track length
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
frame->SetMsgPanel( Track );
}
bool TRACKS_CLEANER::clean_vias()
{
TRACK* next_track;
bool modified = false;
for( TRACK* track = m_Brd->m_Track; track; track = track->Next() )
{
// Correct via m_End defects (if any)
if( track->Type() == PCB_VIA_T )
{
if( track->GetStart() != track->GetEnd() )
track->SetEnd( track->GetStart() );
}
if( track->GetShape() != VIA_THROUGH )
continue;
// Search and delete others vias at same location
TRACK* alt_track = track->Next();
for( ; alt_track != NULL; alt_track = next_track )
{
next_track = alt_track->Next();
if( alt_track->GetShape() != VIA_THROUGH )
continue;
if( alt_track->GetStart() != track->GetStart() )
continue;
// delete via
alt_track->UnLink();
delete alt_track;
modified = true;
}
}
// Delete Via on pads at same location
for( TRACK* track = m_Brd->m_Track; track != NULL; track = next_track )
{
next_track = track->Next();
if( track->GetShape() != VIA_THROUGH )
continue;
// Examine the list of connected pads:
// if one pad through is found, the via can be removed
for( unsigned ii = 0; ii < track->m_PadsConnected.size(); ii++ )
{
D_PAD * pad = track->m_PadsConnected[ii];
if( (pad->GetLayerMask() & ALL_CU_LAYERS) == ALL_CU_LAYERS )
{
// redundant: via delete it
track->UnLink();
delete track;
modified = true;
break;
}
}
}
return modified;
}
bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
unsigned itmp;
if( aTrack == NULL )
{
if( GetActiveLayer() != GetScreen()->m_Route_Layer_TOP )
SetActiveLayer( GetScreen()->m_Route_Layer_TOP );
else
SetActiveLayer( GetScreen()->m_Route_Layer_BOTTOM );
UpdateStatusBar();
return true;
}
// Avoid more than one via on the current location:
if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
g_CurrentTrackSegment->GetLayer() ) )
return false;
for( TRACK* segm = g_FirstTrackSegment; segm; segm = segm->Next() )
{
if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
return false;
}
// Is the current segment Ok (no DRC error) ?
if( g_Drc_On )
{
if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
// DRC error, the change layer is not made
return false;
// Handle 2 segments.
if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
{
if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
return false;
}
}
/* Save current state before placing a via.
* If the via cannot be placed this current state will be reused
*/
itmp = g_CurrentTrackList.GetCount();
Begin_Route( g_CurrentTrackSegment, DC );
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// create the via
VIA* via = new VIA( GetBoard() );
via->SetFlags( IS_NEW );
via->SetViaType( GetDesignSettings().m_CurrentViaType );
via->SetNetCode( GetBoard()->GetHighLightNetCode() );
via->SetPosition( g_CurrentTrackSegment->GetEnd() );
// for microvias, the size and hole will be changed later.
via->SetWidth( GetDesignSettings().GetCurrentViaSize());
via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );
// Usual via is from copper to component.
// layer pair is B_Cu and F_Cu.
via->SetLayerPair( B_Cu, F_Cu );
LAYER_ID first_layer = GetActiveLayer();
LAYER_ID last_layer;
// prepare switch to new active layer:
if( first_layer != GetScreen()->m_Route_Layer_TOP )
last_layer = GetScreen()->m_Route_Layer_TOP;
else
last_layer = GetScreen()->m_Route_Layer_BOTTOM;
// Adjust the actual via layer pair
switch( via->GetViaType() )
{
case VIA_BLIND_BURIED:
via->SetLayerPair( first_layer, last_layer );
break;
case VIA_MICROVIA: // from external to the near neighbor inner layer
{
LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );
if( first_layer == B_Cu )
last_layer = last_inner_layer;
else if( first_layer == F_Cu )
last_layer = In1_Cu;
else if( first_layer == last_inner_layer )
last_layer = B_Cu;
else if( first_layer == In1_Cu )
last_layer = F_Cu;
// else error: will be removed later
via->SetLayerPair( first_layer, last_layer );
// Update diameter and hole size, which where set previously
// for normal vias
NETINFO_ITEM* net = via->GetNet();
via->SetWidth( net->GetMicroViaSize() );
via->SetDrill( net->GetMicroViaDrillSize() );
}
break;
default:
break;
}
if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
{
// DRC fault: the Via cannot be placed here ...
delete via;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// delete the track(s) added in Begin_Route()
while( g_CurrentTrackList.GetCount() > itmp )
{
Delete_Segment( DC, g_CurrentTrackSegment );
}
SetCurItem( g_CurrentTrackSegment, false );
// Refresh DRC diag, erased by previous calls
if( m_drc->GetCurrentMarker() )
SetMsgPanel( m_drc->GetCurrentMarker() );
return false;
}
SetActiveLayer( last_layer );
TRACK* lastNonVia = g_CurrentTrackSegment;
/* A new via was created. It was Ok.
*/
g_CurrentTrackList.PushBack( via );
/* The via is now in linked list and we need a new track segment
* after the via, starting at via location.
* it will become the new current segment (from via to the mouse cursor)
*/
TRACK* track = (TRACK*)lastNonVia->Clone();
/* the above creates a new segment from the last entered segment, with the
* current width, flags, netcode, etc... values.
* layer, start and end point are not correct,
* and will be modified next
*/
// set the layer to the new value
track->SetLayer( GetActiveLayer() );
/* the start point is the via position and the end point is the cursor
* which also is on the via (will change when moving mouse)
*/
track->SetEnd( via->GetStart() );
track->SetStart( via->GetStart() );
g_CurrentTrackList.PushBack( track );
if( g_TwoSegmentTrackBuild )
{
// Create a second segment (we must have 2 track segments to adjust)
g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
}
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
SetMsgPanel( via );
UpdateStatusBar();
return true;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply( COMMIT& aCommit )
{
if( !check() )
return false;
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
aCommit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
assert( false );
break;
}
}
return true;
}
/* Insert the new track created in the list of tracks.
* amend the points of beginning and end of the track so that they are
* connected
* Center on pads even if they are off grid.
*/
static void AddNewTrace( PCB_EDIT_FRAME* pcbframe, wxDC* DC )
{
if( g_FirstTrackSegment == NULL )
return;
int dx0, dy0, dx1, dy1;
int marge, via_marge;
EDA_DRAW_PANEL* panel = pcbframe->GetCanvas();
PCB_SCREEN* screen = pcbframe->GetScreen();
marge = s_Clearance + ( pcbframe->GetDesignSettings().GetCurrentTrackWidth() / 2 );
via_marge = s_Clearance + ( pcbframe->GetDesignSettings().GetCurrentViaSize() / 2 );
dx1 = g_CurrentTrackSegment->GetEnd().x - g_CurrentTrackSegment->GetStart().x;
dy1 = g_CurrentTrackSegment->GetEnd().y - g_CurrentTrackSegment->GetStart().y;
// Place on center of pad if off grid.
dx0 = pt_cur_ch->m_PadStart->GetPosition().x - g_CurrentTrackSegment->GetStart().x;
dy0 = pt_cur_ch->m_PadStart->GetPosition().y - g_CurrentTrackSegment->GetStart().y;
// If aligned, change the origin point.
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
g_CurrentTrackSegment->SetEnd( pt_cur_ch->m_PadStart->GetPosition() );
}
else
{
TRACK* newTrack = (TRACK*)g_CurrentTrackSegment->Clone();
newTrack->SetEnd( pt_cur_ch->m_PadStart->GetPosition() );
newTrack->SetStart( g_CurrentTrackSegment->GetEnd() );
g_CurrentTrackList.PushBack( newTrack );
}
g_FirstTrackSegment->start = pcbframe->GetBoard()->GetPad( g_FirstTrackSegment,
ENDPOINT_START );
if( g_FirstTrackSegment->start )
g_FirstTrackSegment->SetState( BEGIN_ONPAD, true );
g_CurrentTrackSegment->end = pcbframe->GetBoard()->GetPad( g_CurrentTrackSegment,
ENDPOINT_END );
if( g_CurrentTrackSegment->end )
g_CurrentTrackSegment->SetState( END_ONPAD, true );
// Out the new track on the matrix board
for( TRACK* track = g_FirstTrackSegment; track; track = track->Next() )
{
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Insert new segments in real board
int netcode = g_FirstTrackSegment->GetNetCode();
TRACK* firstTrack = g_FirstTrackSegment;
int newCount = g_CurrentTrackList.GetCount();
// Put entire new current segment list in BOARD
TRACK* track;
TRACK* insertBeforeMe = g_CurrentTrackSegment->GetBestInsertPoint( pcbframe->GetBoard() );
while( ( track = g_CurrentTrackList.PopFront() ) != NULL )
{
ITEM_PICKER picker( track, UR_NEW );
s_ItemsListPicker.PushItem( picker );
pcbframe->GetBoard()->m_Track.Insert( track, insertBeforeMe );
}
DrawTraces( panel, DC, firstTrack, newCount, GR_OR );
pcbframe->TestNetConnection( DC, netcode );
screen->SetModify();
}
/* This function is used by Retrace and read the autorouting matrix data cells to create
* the real track on the physical board
*/
static void OrCell_Trace( BOARD* pcb, int col, int row,
int side, int orient, int current_net_code )
{
if( orient == HOLE ) // placement of a via
{
VIA *newVia = new VIA( pcb );
g_CurrentTrackList.PushBack( newVia );
g_CurrentTrackSegment->SetState( TRACK_AR, true );
g_CurrentTrackSegment->SetLayer( F_Cu );
g_CurrentTrackSegment->SetStart(wxPoint( pcb->GetBoundingBox().GetX() +
( RoutingMatrix.m_GridRouting * row ),
pcb->GetBoundingBox().GetY() +
( RoutingMatrix.m_GridRouting * col )));
g_CurrentTrackSegment->SetEnd( g_CurrentTrackSegment->GetStart() );
g_CurrentTrackSegment->SetWidth( pcb->GetDesignSettings().GetCurrentViaSize() );
newVia->SetViaType( pcb->GetDesignSettings().m_CurrentViaType );
g_CurrentTrackSegment->SetNetCode( current_net_code );
}
else // placement of a standard segment
{
TRACK *newTrack = new TRACK( pcb );
int dx0, dy0, dx1, dy1;
g_CurrentTrackList.PushBack( newTrack );
g_CurrentTrackSegment->SetLayer( g_Route_Layer_BOTTOM );
if( side == TOP )
g_CurrentTrackSegment->SetLayer( g_Route_Layer_TOP );
g_CurrentTrackSegment->SetState( TRACK_AR, true );
g_CurrentTrackSegment->SetEnd( wxPoint( pcb->GetBoundingBox().GetX() +
( RoutingMatrix.m_GridRouting * row ),
pcb->GetBoundingBox().GetY() +
( RoutingMatrix.m_GridRouting * col )));
g_CurrentTrackSegment->SetNetCode( current_net_code );
if( g_CurrentTrackSegment->Back() == NULL ) // Start trace.
{
g_CurrentTrackSegment->SetStart( wxPoint( segm_fX, segm_fY ) );
// Placement on the center of the pad if outside grid.
dx1 = g_CurrentTrackSegment->GetEnd().x - g_CurrentTrackSegment->GetStart().x;
dy1 = g_CurrentTrackSegment->GetEnd().y - g_CurrentTrackSegment->GetStart().y;
dx0 = pt_cur_ch->m_PadEnd->GetPosition().x - g_CurrentTrackSegment->GetStart().x;
dy0 = pt_cur_ch->m_PadEnd->GetPosition().y - g_CurrentTrackSegment->GetStart().y;
// If aligned, change the origin point.
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
g_CurrentTrackSegment->SetStart( pt_cur_ch->m_PadEnd->GetPosition() );
}
else // Creation of a supplemental segment
{
g_CurrentTrackSegment->SetStart( pt_cur_ch->m_PadEnd->GetPosition() );
newTrack = (TRACK*)g_CurrentTrackSegment->Clone();
newTrack->SetStart( g_CurrentTrackSegment->GetEnd());
g_CurrentTrackList.PushBack( newTrack );
}
}
else
{
if( g_CurrentTrackSegment->Back() )
{
g_CurrentTrackSegment->SetStart( g_CurrentTrackSegment->Back()->GetEnd() );
}
}
g_CurrentTrackSegment->SetWidth( pcb->GetDesignSettings().GetCurrentTrackWidth() );
if( g_CurrentTrackSegment->GetStart() != g_CurrentTrackSegment->GetEnd() )
{
// Reduce aligned segments by one.
TRACK* oldTrack = g_CurrentTrackSegment->Back();
if( oldTrack && oldTrack->Type() != PCB_VIA_T )
{
dx1 = g_CurrentTrackSegment->GetEnd().x - g_CurrentTrackSegment->GetStart().x;
dy1 = g_CurrentTrackSegment->GetEnd().y - g_CurrentTrackSegment->GetStart().y;
dx0 = oldTrack->GetEnd().x - oldTrack->GetStart().x;
dy0 = oldTrack->GetEnd().y - oldTrack->GetStart().y;
if( abs( dx0 * dy1 ) == abs( dx1 * dy0 ) )
{
oldTrack->SetEnd( g_CurrentTrackSegment->GetEnd() );
delete g_CurrentTrackList.PopBack();
}
}
}
}
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
{
return;
}
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
EXCHG(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
if( pnext != Next() || pback != Back() )
{
Pnext = pnext;
Pback = pback;
#ifdef DEBUG
wxLogMessage( wxT( "SwapData Error: %s Pnext or Pback pointers modified" ),
GetClass().GetData() );
#endif
}
}
void BOARD_ITEM::SwapData( BOARD_ITEM* aImage )
{
if( aImage == NULL )
return;
// Remark: to create images of edited items to undo, we are using Clone method
// which can duplication of items foe copy, but does not clone all members
// mainly pointers in chain and time stamp, which is set to new, unique value.
// So we have to use the current values of these parameters.
EDA_ITEM * pnext = Next();
EDA_ITEM * pback = Back();
DHEAD* mylist = m_List;
time_t timestamp = GetTimeStamp();
switch( Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) this );
( (MODULE*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) this );
( (ZONE_CONTAINER*) this )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
std::swap( *((DRAWSEGMENT*)this), *((DRAWSEGMENT*)aImage) );
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) this;
TRACK* image = (TRACK*) aImage;
std::swap(track->m_Layer, image->m_Layer );
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart();
track->SetStart( image->GetStart() );
image->SetStart( exchp );
exchp = track->GetEnd();
track->SetEnd( image->GetEnd() );
image->SetEnd( exchp );
int atmp = track->GetWidth();
track->SetWidth( image->GetWidth() );
image->SetWidth( atmp );
if( Type() == PCB_VIA_T )
{
VIA *via = static_cast<VIA*>( this );
VIA *viaimage = static_cast<VIA*>( aImage );
VIATYPE_T viatmp = via->GetViaType();
via->SetViaType( viaimage->GetViaType() );
viaimage->SetViaType( viatmp );
int drilltmp = via->GetDrillValue();
if( via->IsDrillDefault() )
drilltmp = -1;
int itmp = viaimage->GetDrillValue();
if( viaimage->IsDrillDefault() )
itmp = -1;
std::swap(itmp, drilltmp );
if( drilltmp > 0 )
via->SetDrill( drilltmp );
else
via->SetDrillDefault();
if( itmp > 0 )
viaimage->SetDrill( itmp );
else
viaimage->SetDrillDefault();
}
}
break;
case PCB_TEXT_T:
std::swap( *((TEXTE_PCB*)this), *((TEXTE_PCB*)aImage) );
break;
case PCB_TARGET_T:
std::swap( *((PCB_TARGET*)this), *((PCB_TARGET*)aImage) );
break;
case PCB_DIMENSION_T:
std::swap( *((DIMENSION*)this), *((DIMENSION*)aImage) );
break;
case PCB_ZONE_T:
default:
wxLogMessage( wxT( "SwapData() error: unexpected type %d" ), Type() );
break;
}
// Restore pointers and time stamp, to be sure they are not broken
Pnext = pnext;
Pback = pback;
m_List = mylist;
SetTimeStamp( timestamp );
}
void PNS_ROUTER::CommitRouting( PNS_NODE* aNode )
{
PNS_NODE::ITEM_VECTOR removed, added;
aNode->GetUpdatedItems( removed, added );
for( unsigned int i = 0; i < removed.size(); i++ )
{
BOARD_CONNECTED_ITEM* parent = removed[i]->Parent();
if( parent )
{
m_view->Remove( parent );
m_board->Remove( parent );
m_undoBuffer.PushItem( ITEM_PICKER( parent, UR_DELETED ) );
}
}
for( PNS_ITEM* item : added )
{
BOARD_CONNECTED_ITEM* newBI = NULL;
switch( item->Kind() )
{
case PNS_ITEM::SEGMENT:
{
PNS_SEGMENT* seg = static_cast<PNS_SEGMENT*>( item );
TRACK* track = new TRACK( m_board );
const SEG& s = seg->Seg();
track->SetStart( wxPoint( s.A.x, s.A.y ) );
track->SetEnd( wxPoint( s.B.x, s.B.y ) );
track->SetWidth( seg->Width() );
track->SetLayer( ToLAYER_ID( seg->Layers().Start() ) );
track->SetNetCode( seg->Net() > 0 ? seg->Net() : 0 );
newBI = track;
break;
}
case PNS_ITEM::VIA:
{
VIA* via_board = new VIA( m_board );
PNS_VIA* via = static_cast<PNS_VIA*>( item );
via_board->SetPosition( wxPoint( via->Pos().x, via->Pos().y ) );
via_board->SetWidth( via->Diameter() );
via_board->SetDrill( via->Drill() );
via_board->SetNetCode( via->Net() > 0 ? via->Net() : 0 );
via_board->SetViaType( via->ViaType() ); // MUST be before SetLayerPair()
via_board->SetLayerPair( ToLAYER_ID( via->Layers().Start() ),
ToLAYER_ID( via->Layers().End() ) );
newBI = via_board;
break;
}
default:
break;
}
if( newBI )
{
item->SetParent( newBI );
newBI->ClearFlags();
m_view->Add( newBI );
m_board->Add( newBI );
m_undoBuffer.PushItem( ITEM_PICKER( newBI, UR_NEW ) );
newBI->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY );
}
}
m_board->GetRatsnest()->Recalculate();
m_world->Commit( aNode );
}
bool DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow()
{
auto connectivity = m_frame->GetBoard()->GetConnectivity();
int newNetCode = m_netSelector->GetSelectedNetcode();
std::vector<D_PAD*> changingPads;
if ( !m_netSelector->IsIndeterminate() )
{
std::set<D_PAD*> connectedPads;
for( auto& item : m_items )
{
const KICAD_T ourTypes[] = { PCB_TRACE_T, PCB_PAD_T, PCB_VIA_T, PCB_MODULE_T, EOT };
auto connectedItems = connectivity->GetConnectedItems( static_cast<BOARD_CONNECTED_ITEM*>( item ), ourTypes, true );
for ( auto citem : connectedItems )
{
if( citem->Type() == PCB_PAD_T )
{
connectedPads.insert( static_cast<D_PAD*>( citem ) );
}
}
}
for( D_PAD* pad : connectedPads )
{
if( pad->GetNetCode() != newNetCode )
changingPads.push_back( pad );
}
}
// Run validations:
if( changingPads.size() )
{
if( !confirmPadChange( changingPads ) )
return false;
}
if( m_vias )
{
if( !m_viaDiameter.Validate( GEOMETRY_MIN_SIZE, INT_MAX )
|| !m_viaDrill.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
if( m_ViaDiameterCtrl->IsEnabled() && !m_viaDiameter.IsIndeterminate()
&& m_ViaDrillCtrl->IsEnabled() && !m_viaDrill.IsIndeterminate()
&& m_viaDiameter.GetValue() <= m_viaDrill.GetValue() )
{
DisplayError( GetParent(), _( "Via drill size must be smaller than via diameter" ) );
m_ViaDrillCtrl->SelectAll();
m_ViaDrillCtrl->SetFocus();
return false;
}
if( m_ViaStartLayer->GetLayerSelection() != UNDEFINED_LAYER &&
m_ViaStartLayer->GetLayerSelection() == m_ViaEndLayer->GetLayerSelection() )
{
DisplayError( GetParent(), _( "Via start layer and end layer cannot be the same" ) );
return false;
}
}
if( m_tracks )
{
if( !m_trackWidth.Validate( GEOMETRY_MIN_SIZE, INT_MAX ) )
return false;
}
// If we survived that, then save the changes:
bool changeLock = m_lockedCbox->Get3StateValue() != wxCHK_UNDETERMINED;
bool setLock = m_lockedCbox->Get3StateValue() == wxCHK_CHECKED;
for( auto item : m_items )
{
m_commit.Modify( item );
switch( item->Type() )
{
case PCB_TRACE_T:
{
wxASSERT( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( !m_trackStartX.IsIndeterminate() )
t->SetStart( wxPoint( m_trackStartX.GetValue(), t->GetStart().y ) );
if( !m_trackStartY.IsIndeterminate() )
t->SetStart( wxPoint( t->GetStart().x, m_trackStartY.GetValue() ) );
if( !m_trackEndX.IsIndeterminate() )
t->SetEnd( wxPoint( m_trackEndX.GetValue(), t->GetEnd().y ) );
if( !m_trackEndY.IsIndeterminate() )
t->SetEnd( wxPoint( t->GetEnd().x, m_trackEndY.GetValue() ) );
if( m_trackNetclass->IsChecked() )
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
else if( !m_trackWidth.IsIndeterminate() )
t->SetWidth( m_trackWidth.GetValue() );
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (PCB_LAYER_ID) layer );
if( changeLock )
t->SetLocked( setLock );
if ( !m_netSelector->IsIndeterminate() )
t->SetNetCode( m_netSelector->GetSelectedNetcode() );
break;
}
case PCB_VIA_T:
{
wxASSERT( m_vias );
VIA* v = static_cast<VIA*>( item );
if( !m_viaX.IsIndeterminate() )
v->SetPosition( wxPoint( m_viaX.GetValue(), v->GetPosition().y ) );
if( !m_viaY.IsIndeterminate() )
v->SetPosition( wxPoint( v->GetPosition().x, m_viaY.GetValue() ) );
if( m_ViaTypeChoice->GetSelection() != 3)
{
switch( m_ViaTypeChoice->GetSelection() )
{
default:
case 0: v->SetViaType( VIA_THROUGH ); v->SanitizeLayers(); break;
case 1: v->SetViaType( VIA_MICROVIA ); break;
case 2: v->SetViaType( VIA_BLIND_BURIED ); break;
}
}
auto startLayer = static_cast<PCB_LAYER_ID>( m_ViaStartLayer->GetLayerSelection() );
auto endLayer = static_cast<PCB_LAYER_ID>( m_ViaEndLayer->GetLayerSelection() );
if (startLayer != UNDEFINED_LAYER )
v->SetTopLayer( startLayer );
if (endLayer != UNDEFINED_LAYER )
v->SetBottomLayer( endLayer );
v->SanitizeLayers();
if( m_viaNetclass->IsChecked() )
{
switch( v->GetViaType() )
{
default:
wxFAIL_MSG("Unhandled via type");
// fall through
case VIA_THROUGH:
case VIA_BLIND_BURIED:
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
break;
case VIA_MICROVIA:
v->SetWidth( v->GetNetClass()->GetuViaDiameter() );
v->SetDrill( v->GetNetClass()->GetuViaDrill() );
break;
}
}
else
{
if( !m_viaDiameter.IsIndeterminate() )
v->SetWidth( m_viaDiameter.GetValue() );
if( !m_viaDrill.IsIndeterminate() )
v->SetDrill( m_viaDrill.GetValue() );
}
if ( !m_netSelector->IsIndeterminate() )
v->SetNetCode( m_netSelector->GetSelectedNetcode() );
if( changeLock )
v->SetLocked( setLock );
break;
}
default:
wxASSERT( false );
break;
}
}
if ( !m_netSelector->IsIndeterminate() )
{
// Commit::Push() will rebuild connectivitiy propagating nets from connected pads
// outwards. We therefore have to update the connected pads in order for the net
// change to "stick".
for( D_PAD* pad : changingPads )
{
m_commit.Modify( pad );
pad->SetNetCode( m_netSelector->GetSelectedNetcode() );
}
}
m_commit.Push( _( "Edit track/via properties" ) );
return true;
}
bool DIALOG_TRACK_VIA_PROPERTIES::Apply()
{
if( !check() )
return false;
for( int i = 0; i < m_items.Size(); ++i )
{
BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );
switch( item->Type() )
{
case PCB_TRACE_T:
{
assert( m_tracks );
TRACK* t = static_cast<TRACK*>( item );
if( m_trackStartX.Valid() || m_trackStartY.Valid() )
{
wxPoint start = t->GetStart();
if( m_trackStartX.Valid() )
start.x = m_trackStartX.GetValue();
if( m_trackStartY.Valid() )
start.y = m_trackStartY.GetValue();
t->SetStart( start );
}
if( m_trackEndX.Valid() || m_trackEndY.Valid() )
{
wxPoint end = t->GetEnd();
if( m_trackEndX.Valid() )
end.x = m_trackEndX.GetValue();
if( m_trackEndY.Valid() )
end.y = m_trackEndY.GetValue();
t->SetEnd( end );
}
if( m_trackNetclass->IsChecked() )
{
t->SetWidth( t->GetNetClass()->GetTrackWidth() );
}
else if( m_trackWidth.Valid() )
{
t->SetWidth( m_trackWidth.GetValue() );
}
LAYER_NUM layer = m_TrackLayerCtrl->GetLayerSelection();
if( layer != UNDEFINED_LAYER )
t->SetLayer( (LAYER_ID) layer );
break;
}
case PCB_VIA_T:
{
assert( m_vias );
VIA* v = static_cast<VIA*>( item );
if( m_viaX.Valid() || m_viaY.Valid() )
{
wxPoint pos = v->GetPosition();
if( m_viaX.Valid() )
pos.x = m_viaX.GetValue();
if( m_viaY.Valid() )
pos.y = m_viaY.GetValue();
v->SetPosition( pos );
}
if( m_viaNetclass->IsChecked() )
{
v->SetWidth( v->GetNetClass()->GetViaDiameter() );
v->SetDrill( v->GetNetClass()->GetViaDrill() );
}
else
{
if( m_viaDiameter.Valid() )
v->SetWidth( m_viaDiameter.GetValue() );
if( m_viaDrill.Valid() )
v->SetDrill( m_viaDrill.GetValue() );
}
break;
}
default:
assert( false );
break;
}
}
return true;
}
// Routine to place a moved pad.
void PCB_BASE_FRAME::PlacePad( D_PAD* aPad, wxDC* DC )
{
int dX, dY;
TRACK* Track;
if( aPad == NULL )
return;
MODULE* module = aPad->GetParent();
ITEM_PICKER picker( NULL, UR_CHANGED );
PICKED_ITEMS_LIST pickList;
// Save dragged track segments in undo list
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
Track = g_DragSegmentList[ii].m_Track;
// Set the old state
if( g_DragSegmentList[ii].m_Pad_Start )
Track->SetStart( Pad_OldPos );
if( g_DragSegmentList[ii].m_Pad_End )
Track->SetEnd( Pad_OldPos );
picker.SetItem( Track );
pickList.PushItem( picker );
}
// Save old module and old items values
wxPoint pad_curr_position = aPad->GetPosition();
aPad->SetPosition( Pad_OldPos );
if( g_DragSegmentList.size() == 0 )
SaveCopyInUndoList( module, UR_CHANGED );
else
{
picker.SetItem( module );
pickList.PushItem( picker );
SaveCopyInUndoList( pickList, UR_CHANGED );
}
aPad->SetPosition( pad_curr_position );
aPad->Draw( m_canvas, DC, GR_XOR );
// Redraw dragged track segments
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
Track = g_DragSegmentList[ii].m_Track;
// Set the new state
if( g_DragSegmentList[ii].m_Pad_Start )
Track->SetStart( aPad->GetPosition() );
if( g_DragSegmentList[ii].m_Pad_End )
Track->SetEnd( aPad->GetPosition() );
Track->SetState( IN_EDIT, OFF );
if( DC )
Track->Draw( m_canvas, DC, GR_OR );
}
// Compute local coordinates (i.e refer to module position and for module orient = 0)
dX = aPad->GetPosition().x - Pad_OldPos.x;
dY = aPad->GetPosition().y - Pad_OldPos.y;
RotatePoint( &dX, &dY, -module->GetOrientation() );
aPad->SetX0( dX + aPad->GetPos0().x );
aPad->SetY0( dY + aPad->GetPos0().y );
aPad->ClearFlags();
if( DC )
aPad->Draw( m_canvas, DC, GR_OR );
module->CalculateBoundingBox();
module->SetLastEditTime();
EraseDragList();
OnModify();
m_canvas->SetMouseCapture( NULL, NULL );
m_Pcb->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK );
}
/**
* Function SwapData
* Used in undo / redo command:
* swap data between Item and a copy
* swapped data is data modified by edition, mainly sizes and texts
* so ONLY FEW values are swapped
* @param aItem = the item
* @param aImage = a copy of the item
*/
void SwapData( BOARD_ITEM* aItem, BOARD_ITEM* aImage )
{
if( aItem == NULL || aImage == NULL )
{
wxMessageBox( wxT( "SwapData error: NULL pointer" ) );
return;
}
// Swap layers:
if( aItem->Type() != PCB_MODULE_T && aItem->Type() != PCB_ZONE_AREA_T )
{
// These items have a global swap function.
int layer, layerimg;
layer = aItem->GetLayer();
layerimg = aImage->GetLayer();
aItem->SetLayer( layerimg );
aImage->SetLayer( layer );
}
switch( aItem->Type() )
{
case PCB_MODULE_T:
{
MODULE* tmp = (MODULE*) aImage->Clone();
( (MODULE*) aImage )->Copy( (MODULE*) aItem );
( (MODULE*) aItem )->Copy( tmp );
delete tmp;
}
break;
case PCB_ZONE_AREA_T:
{
ZONE_CONTAINER* tmp = (ZONE_CONTAINER*) aImage->Clone();
( (ZONE_CONTAINER*) aImage )->Copy( (ZONE_CONTAINER*) aItem );
( (ZONE_CONTAINER*) aItem )->Copy( tmp );
delete tmp;
}
break;
case PCB_LINE_T:
#if 0
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Start, ( (DRAWSEGMENT*) aImage )->m_Start );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_End, ( (DRAWSEGMENT*) aImage )->m_End );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Width, ( (DRAWSEGMENT*) aImage )->m_Width );
EXCHG( ( (DRAWSEGMENT*) aItem )->m_Shape, ( (DRAWSEGMENT*) aImage )->m_Shape );
#else
{
DRAWSEGMENT tmp = *(DRAWSEGMENT*) aImage;
*aImage = *aItem;
*aItem = tmp;
}
#endif
break;
case PCB_TRACE_T:
case PCB_VIA_T:
{
TRACK* track = (TRACK*) aItem;
TRACK* image = (TRACK*) aImage;
// swap start, end, width and shape for track and image.
wxPoint exchp = track->GetStart(); track->SetStart( image->GetStart() ); image->SetStart( exchp );
exchp = track->GetEnd(); track->SetEnd( image->GetEnd() ); image->SetEnd( exchp );
int atmp = track->GetWidth(); track->SetWidth( image->GetWidth() ); image->SetWidth( atmp );
atmp = track->GetShape(); track->SetShape( image->GetShape() ); image->SetShape( atmp );
atmp = track->GetDrillValue();
if( track->IsDrillDefault() )
atmp = -1;
int itmp = image->GetDrillValue();
if( image->IsDrillDefault() )
itmp = -1;
EXCHG(itmp, atmp );
if( atmp > 0 )
track->SetDrill( atmp );
else
track->SetDrillDefault();
if( itmp > 0 )
image->SetDrill( itmp );
else
image->SetDrillDefault();
}
break;
case PCB_TEXT_T:
EXCHG( ( (TEXTE_PCB*) aItem )->m_Mirror, ( (TEXTE_PCB*) aImage )->m_Mirror );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Size, ( (TEXTE_PCB*) aImage )->m_Size );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Pos, ( (TEXTE_PCB*) aImage )->m_Pos );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Thickness, ( (TEXTE_PCB*) aImage )->m_Thickness );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Orient, ( (TEXTE_PCB*) aImage )->m_Orient );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Text, ( (TEXTE_PCB*) aImage )->m_Text );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Italic, ( (TEXTE_PCB*) aImage )->m_Italic );
EXCHG( ( (TEXTE_PCB*) aItem )->m_Bold, ( (TEXTE_PCB*) aImage )->m_Bold );
EXCHG( ( (TEXTE_PCB*) aItem )->m_HJustify, ( (TEXTE_PCB*) aImage )->m_HJustify );
EXCHG( ( (TEXTE_PCB*) aItem )->m_VJustify, ( (TEXTE_PCB*) aImage )->m_VJustify );
break;
case PCB_TARGET_T:
( (PCB_TARGET*) aItem )->Exchg( (PCB_TARGET*) aImage );
break;
case PCB_DIMENSION_T:
{
wxString txt = ( (DIMENSION*) aItem )->GetText();
( (DIMENSION*) aItem )->SetText( ( (DIMENSION*) aImage )->GetText() );
( (DIMENSION*) aImage )->SetText( txt );
EXCHG( ( (DIMENSION*) aItem )->m_Width, ( (DIMENSION*) aImage )->m_Width );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Size, ( (DIMENSION*) aImage )->m_Text.m_Size );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Pos, ( (DIMENSION*) aImage )->m_Text.m_Pos );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Thickness,
( (DIMENSION*) aImage )->m_Text.m_Thickness );
EXCHG( ( (DIMENSION*) aItem )->m_Text.m_Mirror,
( (DIMENSION*) aImage )->m_Text.m_Mirror );
}
break;
case PCB_ZONE_T:
default:
wxMessageBox( wxT( "SwapData() error: unexpected type" ) );
break;
}
}