void PCB_EDIT_FRAME::StartMoveOneNodeOrSegment( TRACK* aTrack, wxDC* aDC, int aCommand )
{
if( !aTrack )
return;
EraseDragList();
// Change highlighted net: the new one will be highlighted
GetBoard()->PushHighLight();
if( GetBoard()->IsHighLightNetON() )
HighLight( aDC );
PosInit = GetCrossHairPosition();
if( aTrack->Type() == PCB_VIA_T )
{
aTrack->SetFlags( IS_DRAGGED | STARTPOINT | ENDPOINT );
AddSegmentToDragList( aTrack->GetFlags(), aTrack );
if( aCommand != ID_POPUP_PCB_MOVE_TRACK_SEGMENT )
{
Collect_TrackSegmentsToDrag( GetBoard(), aTrack->GetStart(),
aTrack->GetLayerSet(),
aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
}
PosInit = aTrack->GetStart();
}
else
{
STATUS_FLAGS diag = aTrack->IsPointOnEnds( GetCrossHairPosition(), -1 );
wxPoint pos;
switch( aCommand )
{
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT: // Move segment
aTrack->SetFlags( IS_DRAGGED | ENDPOINT | STARTPOINT );
AddSegmentToDragList( aTrack->GetFlags(), aTrack );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT: // drag a segment
pos = aTrack->GetStart();
Collect_TrackSegmentsToDrag( GetBoard(), pos, aTrack->GetLayerSet(),
aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
pos = aTrack->GetEnd();
aTrack->SetFlags( IS_DRAGGED | ENDPOINT | STARTPOINT );
Collect_TrackSegmentsToDrag( GetBoard(), pos, aTrack->GetLayerSet(),
aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
break;
case ID_POPUP_PCB_MOVE_TRACK_NODE: // Drag via or move node
pos = (diag & STARTPOINT) ? aTrack->GetStart() : aTrack->GetEnd();
Collect_TrackSegmentsToDrag( GetBoard(), pos, aTrack->GetLayerSet(),
aTrack->GetNetCode(), aTrack->GetWidth() / 2 );
PosInit = pos;
break;
}
aTrack->SetFlags( IS_DRAGGED );
}
// Prepare the Undo command
ITEM_PICKER picker( aTrack, UR_CHANGED );
picker.SetLink( aTrack->Clone() );
s_ItemsListPicker.PushItem( picker );
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
TRACK* draggedtrack = g_DragSegmentList[ii].m_Track;
picker.SetItem( draggedtrack );
picker.SetLink( draggedtrack->Clone() );
s_ItemsListPicker.PushItem( picker );
draggedtrack = (TRACK*) picker.GetLink();
draggedtrack->SetStatus( 0 );
draggedtrack->ClearFlags();
}
s_LastPos = PosInit;
m_canvas->SetMouseCapture( Show_MoveNode, Abort_MoveTrack );
GetBoard()->SetHighLightNet( aTrack->GetNetCode() );
GetBoard()->HighLightON();
GetBoard()->DrawHighLight( m_canvas, aDC, GetBoard()->GetHighLightNetCode() );
m_canvas->CallMouseCapture( aDC, wxDefaultPosition, true );
UndrawAndMarkSegmentsToDrag( m_canvas, aDC );
}
void PCB_EDIT_FRAME::Start_DragTrackSegmentAndKeepSlope( TRACK* track, wxDC* DC )
{
TRACK* TrackToStartPoint = NULL;
TRACK* TrackToEndPoint = NULL;
bool error = false;
if( !track )
return;
// TODO: Use clenup functions to merge collinear segments if track
// is connected to a collinear segment.
s_StartSegmentPresent = s_EndSegmentPresent = true;
if( ( track->start == NULL ) || ( track->start->Type() == PCB_TRACE_T ) )
TrackToStartPoint = track->GetTrack( GetBoard()->m_Track, NULL, ENDPOINT_START, true, false );
// Test if more than one segment is connected to this point
if( TrackToStartPoint )
{
TrackToStartPoint->SetState( BUSY, true );
if( ( TrackToStartPoint->Type() == PCB_VIA_T )
|| track->GetTrack( GetBoard()->m_Track, NULL, ENDPOINT_START, true, false ) )
error = true;
TrackToStartPoint->SetState( BUSY, false );
}
if( ( track->end == NULL ) || ( track->end->Type() == PCB_TRACE_T ) )
TrackToEndPoint = track->GetTrack( GetBoard()->m_Track, NULL, ENDPOINT_END, true, false );
// Test if more than one segment is connected to this point
if( TrackToEndPoint )
{
TrackToEndPoint->SetState( BUSY, true );
if( (TrackToEndPoint->Type() == PCB_VIA_T)
|| track->GetTrack( GetBoard()->m_Track, NULL, ENDPOINT_END, true, false ) )
error = true;
TrackToEndPoint->SetState( BUSY, false );
}
if( error )
{
DisplayError( this,
_( "Unable to drag this segment: too many segments connected" ) );
return;
}
if( !TrackToStartPoint || ( TrackToStartPoint->Type() != PCB_TRACE_T ) )
s_StartSegmentPresent = false;
if( !TrackToEndPoint || ( TrackToEndPoint->Type() != PCB_TRACE_T ) )
s_EndSegmentPresent = false;
// Change high light net: the new one will be highlighted
GetBoard()->PushHighLight();
if( GetBoard()->IsHighLightNetON() )
HighLight( DC );
EraseDragList();
track->SetFlags( IS_DRAGGED );
if( TrackToStartPoint )
{
STATUS_FLAGS flag = STARTPOINT;
if( track->GetStart() != TrackToStartPoint->GetStart() )
flag = ENDPOINT;
AddSegmentToDragList( flag, TrackToStartPoint );
track->SetFlags( STARTPOINT );
}
if( TrackToEndPoint )
{
STATUS_FLAGS flag = STARTPOINT;
if( track->GetEnd() != TrackToEndPoint->GetStart() )
flag = ENDPOINT;
AddSegmentToDragList( flag, TrackToEndPoint );
track->SetFlags( ENDPOINT );
}
AddSegmentToDragList( track->GetFlags(), track );
UndrawAndMarkSegmentsToDrag( m_canvas, DC );
PosInit = GetCrossHairPosition();
s_LastPos = GetCrossHairPosition();
m_canvas->SetMouseCapture( Show_Drag_Track_Segment_With_Cte_Slope, Abort_MoveTrack );
GetBoard()->SetHighLightNet( track->GetNetCode() );
GetBoard()->HighLightON();
GetBoard()->DrawHighLight( m_canvas, DC, GetBoard()->GetHighLightNetCode() );
// Prepare the Undo command
ITEM_PICKER picker( NULL, UR_CHANGED );
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
TRACK* draggedtrack = g_DragSegmentList[ii].m_Track;
picker.SetItem( draggedtrack);
picker.SetLink ( draggedtrack->Clone() );
s_ItemsListPicker.PushItem( picker );
draggedtrack = (TRACK*) picker.GetLink();
draggedtrack->SetStatus( 0 );
draggedtrack->ClearFlags();
}
if( !InitialiseDragParameters() )
{
DisplayError( this, _( "Unable to drag this segment: two collinear segments" ) );
m_canvas->SetMouseCaptureCallback( NULL );
Abort_MoveTrack( m_canvas, DC );
return;
}
}
bool PCB_EDIT_FRAME::Other_Layer_Route( TRACK* aTrack, wxDC* DC )
{
unsigned itmp;
if( aTrack == NULL )
{
if( GetActiveLayer() != GetScreen()->m_Route_Layer_TOP )
SetActiveLayer( GetScreen()->m_Route_Layer_TOP );
else
SetActiveLayer( GetScreen()->m_Route_Layer_BOTTOM );
UpdateStatusBar();
return true;
}
// Avoid more than one via on the current location:
if( GetBoard()->GetViaByPosition( g_CurrentTrackSegment->GetEnd(),
g_CurrentTrackSegment->GetLayer() ) )
return false;
for( TRACK* segm = g_FirstTrackSegment; segm; segm = segm->Next() )
{
if( segm->Type() == PCB_VIA_T && g_CurrentTrackSegment->GetEnd() == segm->GetStart() )
return false;
}
// Is the current segment Ok (no DRC error) ?
if( g_Drc_On )
{
if( BAD_DRC==m_drc->Drc( g_CurrentTrackSegment, GetBoard()->m_Track ) )
// DRC error, the change layer is not made
return false;
// Handle 2 segments.
if( g_TwoSegmentTrackBuild && g_CurrentTrackSegment->Back() )
{
if( BAD_DRC == m_drc->Drc( g_CurrentTrackSegment->Back(), GetBoard()->m_Track ) )
return false;
}
}
/* Save current state before placing a via.
* If the via cannot be placed this current state will be reused
*/
itmp = g_CurrentTrackList.GetCount();
Begin_Route( g_CurrentTrackSegment, DC );
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// create the via
VIA* via = new VIA( GetBoard() );
via->SetFlags( IS_NEW );
via->SetViaType( GetDesignSettings().m_CurrentViaType );
via->SetNetCode( GetBoard()->GetHighLightNetCode() );
via->SetPosition( g_CurrentTrackSegment->GetEnd() );
// for microvias, the size and hole will be changed later.
via->SetWidth( GetDesignSettings().GetCurrentViaSize());
via->SetDrill( GetDesignSettings().GetCurrentViaDrill() );
// Usual via is from copper to component.
// layer pair is B_Cu and F_Cu.
via->SetLayerPair( B_Cu, F_Cu );
LAYER_ID first_layer = GetActiveLayer();
LAYER_ID last_layer;
// prepare switch to new active layer:
if( first_layer != GetScreen()->m_Route_Layer_TOP )
last_layer = GetScreen()->m_Route_Layer_TOP;
else
last_layer = GetScreen()->m_Route_Layer_BOTTOM;
// Adjust the actual via layer pair
switch( via->GetViaType() )
{
case VIA_BLIND_BURIED:
via->SetLayerPair( first_layer, last_layer );
break;
case VIA_MICROVIA: // from external to the near neighbor inner layer
{
LAYER_ID last_inner_layer = ToLAYER_ID( ( GetBoard()->GetCopperLayerCount() - 2 ) );
if( first_layer == B_Cu )
last_layer = last_inner_layer;
else if( first_layer == F_Cu )
last_layer = In1_Cu;
else if( first_layer == last_inner_layer )
last_layer = B_Cu;
else if( first_layer == In1_Cu )
last_layer = F_Cu;
// else error: will be removed later
via->SetLayerPair( first_layer, last_layer );
// Update diameter and hole size, which where set previously
// for normal vias
NETINFO_ITEM* net = via->GetNet();
via->SetWidth( net->GetMicroViaSize() );
via->SetDrill( net->GetMicroViaDrillSize() );
}
break;
default:
break;
}
if( g_Drc_On && BAD_DRC == m_drc->Drc( via, GetBoard()->m_Track ) )
{
// DRC fault: the Via cannot be placed here ...
delete via;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// delete the track(s) added in Begin_Route()
while( g_CurrentTrackList.GetCount() > itmp )
{
Delete_Segment( DC, g_CurrentTrackSegment );
}
SetCurItem( g_CurrentTrackSegment, false );
// Refresh DRC diag, erased by previous calls
if( m_drc->GetCurrentMarker() )
SetMsgPanel( m_drc->GetCurrentMarker() );
return false;
}
SetActiveLayer( last_layer );
TRACK* lastNonVia = g_CurrentTrackSegment;
/* A new via was created. It was Ok.
*/
g_CurrentTrackList.PushBack( via );
/* The via is now in linked list and we need a new track segment
* after the via, starting at via location.
* it will become the new current segment (from via to the mouse cursor)
*/
TRACK* track = (TRACK*)lastNonVia->Clone();
/* the above creates a new segment from the last entered segment, with the
* current width, flags, netcode, etc... values.
* layer, start and end point are not correct,
* and will be modified next
*/
// set the layer to the new value
track->SetLayer( GetActiveLayer() );
/* the start point is the via position and the end point is the cursor
* which also is on the via (will change when moving mouse)
*/
track->SetEnd( via->GetStart() );
track->SetStart( via->GetStart() );
g_CurrentTrackList.PushBack( track );
if( g_TwoSegmentTrackBuild )
{
// Create a second segment (we must have 2 track segments to adjust)
g_CurrentTrackList.PushBack( (TRACK*)g_CurrentTrackSegment->Clone() );
}
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
SetMsgPanel( via );
UpdateStatusBar();
return true;
}
