void HandDetector::FindConvexityDefects(vector<Vec4i> ConvexityDefectSet, vector<Point> HandContour, Mat& LiveFrame, Point2f COM, int TiltAngle)
{
vector<Point> FingerTips;
Point2f HandCenter;
float radius;
int fingers=0;
//minEnclosingCircle(HandContour,HandCenter,radius);
//Rect contourRect = boundingRect(HandContour);
//circle(LiveFrame,HandCenter,10,CV_RGB(0,0,255),2,8);
//rectangle(LiveFrame, contourRect, Scalar(0,0,255), 3);
//vector<Point> palmCircle;
for (int i = 0; i < ConvexityDefectSet.size(); i++)
{
int startId = ConvexityDefectSet[i].val[0];
Point ptStart(HandContour[startId]);
int endId = ConvexityDefectSet[i].val[1];
Point ptEnd(HandContour[endId]);
int farId = ConvexityDefectSet[i].val[2];
Point ptFar(HandContour[farId]);
double depth = (double)((ConvexityDefectSet[i].val[3]) / 256); //for getting real pixel values
//cout << "depth" << depth << endl;
//display start points
//circle(original,ptStart,5,CV_RGB(255,0,0),2,8);
//display all end points
//circle(original, ptEnd, 5, CV_RGB(255, 255, 0), 2, 8);
//display all far points
//circle(LiveFrame,ptFar,5,CV_RGB(255,255,0),2,8);
//circle(LiveFrame, HandCenter, radius, cv::Scalar(0,255,255),2);
if (depth > 10 && ptStart.y < COM.y)//
{
circle(LiveFrame,ptStart,5,CV_RGB(255,0,0),2,8);
//circle(LiveFrame, ptStart, 4, CV_RGB(255, 0,0), 4);
FingerTips.push_back(ptStart);
fingers++;
//palmCircle.push_back(ptStart);
}
}
if(mMouseControl)
{
InitMouseControl(LiveFrame,FingerTips,COM,TiltAngle);
}
if(mSwipeON)
{
Point tempCOM;
tempCOM.x = COM.x;
tempCOM.y = COM.y;
mSwipeGesture.SwipeInit(tempCOM, LiveFrame);
}
//cout<<"Fingers = "<<fingers<<endl;
}
void main( int argc, char** argv)
{
//struct Position Pos;
int Ix;
strcpy( ConfigFile, "config.dat");
Parity = NoneParity;
DataBits = 8;
StopBits = 1;
CalledByGuideFlag = No;
KeepGoingFlag = No;
ReadSlewFlag = No;
StartScrollFlag = No;
/* if '-k' and '-s' (after full init): slew to Ra, Dec in slew.dat and keep going, exiting when
desired, writing slew_out.dat file;
if '-k' (before full init): (no slew.dat), keep going until centered on init position, write
slew_out.dat file and exit;
if '-s': slew to Ra, Dec in slew.dat and exit, writing slew_out.dat file;
if no '-k' and no '-s': write slew_out.dat file and exit;
if -c, then use following string as configuration file name, ie scope.exe -c config.dat will
result in config.dat being used
if -x, then use following string as scroll file name, and execute scroll file upon program
startup, ie scope.exe -x nan.scr will cause nan.scr to be loaded and started */
/* argv[0] is name of executing program */
for( Ix = 1; Ix < argc; Ix++)
if( argv[Ix][0] == '-')
if( strcmpi( &argv[Ix][1], "GUIDE") == 0)
CalledByGuideFlag = Yes;
else if( argv[Ix][1] == 'k')
KeepGoingFlag = Yes;
else if( argv[Ix][1] == 's')
ReadSlewFlag = Yes;
else if( (argv[Ix][1] == 'c' || argv[Ix][1] == 'C') && Ix < argc-1)
strcpy( ConfigFile, argv[Ix+1]);
else if( (argv[Ix][1] == 'x' || argv[Ix][1] == 'X') && Ix < argc-1)
{
strcpy( ScrollFilename, argv[Ix+1]);
StartScrollFlag = Yes;
}
InitCommonVars();
ReadConfig();
/*
Pos.Ra = Pos.Dec = 0;
applyCorrectionsFromDataFileCoordYearToEpochNow(&Pos);
printf("\n%f %f %f %f %f %f %f %f", Pos.Precession.A*RadToArcsec, Pos.Precession.Z*RadToArcsec,
Pos.Nutation.A*RadToArcsec, Pos.Nutation.Z*RadToArcsec, Pos.AnnualAberration.A*RadToArcsec,
Pos.AnnualAberration.Z*RadToArcsec, Pos.Ra*RadToArcsec, Pos.Dec*RadToArcsec);
ContMsgRoutine();
*/
/*
HsRecFile = fopen( HsRecFilename, "w");
if( HsRecFile == NULL)
BadExit( strcat( "Could not create ", HsRecFilename));
HsRecIx = 0;
*/
/*
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
InitConvert();
TestConvert();
getch();
TestAltAltAzTrack();
*/
if( DisplayOpeningMsgs)
{
printf( "\nCopyright BBAstroDesigns Inc. 2009\n");
printf( "\nLIMITED WARRANTY This software is provided ``as is'' and any express or");
printf( "\nimplied warranties, including, but not limited to, the implied warranties");
printf( "\nof merchantability and fitness for a particular purpose are disclaimed.");
printf( "\nIn no event shall BBAstroDesigns be liable for any direct, indirect,");
printf( "\nincidental, special, exemplary, nor consequential damages (including, but");
printf( "\nnot limited to, procurement of substitute goods or services, loss of use,");
printf( "\ndate, or profits, or business interruption) however caused and on any");
printf( "\ntheory of liability, whether in contract, strict liability, or tort");
printf( "\n(including negligence or otherwise) arising in any way out of the use of");
printf( "\nthis software, even if advised of the possibility of such damage.\n");
printf( "\nThis software licensed under the GNU GENERAL PUBLIC LICENSE. You may");
printf( "\ndistribute this software per the GNU GPL. See the enclosed gpl.txt.\n\n");
ContMsgRoutine();
}
if( DisplayOpeningMsgs)
printf( "\ncalled by guide: %d, keep_going: %d, read slew.dat file %d",
CalledByGuideFlag, KeepGoingFlag, ReadSlewFlag);
/* if( strcmpi( TestString, "TestSerial") == 0)
{
InitSerial( EncoderComPort, EncoderBaudRate, Parity, DataBits, StopBits);
TestSerial( EncoderComPort);
CloseSerial( EncoderComPort);
} */
/* else if( strcmpi( TestString, "TestVideo") == 0)
{
InitVideo( DisplayOpeningMsgs);
TestVideo();
} */
/* else if( strcmpi( TestString, "TestATimes") == 0)
{
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
TestTimes();
} */
/* else if( strcmpi( TestString, "TestParallelPort") == 0)
{
InitPPort();
TestPPort();
ClosePPort();
} */
/* else if( strcmpi( TestString, "TestRefract") == 0)
{
InitRefract();
TestRefract();
} */
/* else if( strcmpi( TestString, "TestMouse") == 0)
{
TestMouse();
} */
/* else if( strcmpi( TestString, "TestEncoders") == 0)
{
InitSerial( EncoderComPort, EncoderBaudRate, Parity, DataBits, StopBits);
InitEncoders();
TestEncoders();
CloseSerial( EncoderComPort);
} */
/* else if( strcmpi( TestString, "TestHandpad") == 0)
{
InitPPort();
InitializeHandpad();
TestHandpad();
ClosePPort();
} */
/* else if( strcmpi( TestString, "TestConversion") == 0)
{
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
InitConvert();
TestConvert();
} */
/* else if( strcmpi( TestString, "TestAltOffset") == 0)
{
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
InitConvert();
TestAltOffset();
} */
/* else if( strcmpi( TestString, "TestIACA") == 0)
{
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
TestIACA();
InitIACA();
} */
/* else if( strcmpi( TestString, "WritePWMValues") == 0)
{
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
InitVideo( DisplayOpeningMsgs);
InitPPort();
InitMotors();
WritePWMValues();
CloseSteppers();
ClosePPort();
}
else */
{
if( strcmpi( TestString, "NoTest") != 0
&& strcmpi( TestString, "PreloadGuidexx.dat") != 0
&& strcmpi( TestString, "Track") != 0)
{
if( DisplayOpeningMsgs)
printf( "\nsetting unrecognized TestString to 'NoTest'");
strcpy( TestString, "NoTest");
}
InitSerial( EncoderComPort, EncoderBaudRate, Parity, DataBits, StopBits);
InitEncoders();
InitMouseControl();
InitTimes( DisplayOpeningMsgs, Tz, DST, LongitudeDeg);
InitVideo( DisplayOpeningMsgs);
InitPPort();
InitializeHandpad();
InitMotors();
InitConvert();
InitRefract();
InitPEC();
InitGuide();
if( strcmpi( TestString, "PreloadGuidexx.dat") == 0)
{
LoadGuideAlts();
LoadGuideAzs();
}
InitIACA();
InitLX200Input();
InitHPEvent();
if( !CalledByGuideFlag ||
(CalledByGuideFlag && (KeepGoingFlag || ReadSlewFlag)))
{
InitKBEvent();
if( ReadSlewFlag)
InputEquatSlewDat();
if( StartScrollFlag)
LoadScrollFileFromFile();
if( strcmpi( TestString, "Track") == 0)
Start2MotorTrackWithDefaultValues();
while( !QuitFlag)
{
SequentialTaskController();
/* GrandTourFlag used to flag next object: set in ProcessHPEventsModeSwitch() */
if( GrandTourLoaded && GrandTourFlag)
ProcessGrandTour();
else
if( ScrollLoaded && ScrollFlag)
ProcessScroll();
else
if( HPPolarAlignLoaded && HPPolarAlignFlag)
ProcessHPPolarAlign();
else
{
if( UseMouseFlag && ProcessMouseEvent())
;
else
if( KeyStroke)
ProcessKBEvents();
else
ProcessHPEvents();
}
}
CloseKBEvent();
if( DisplayOpeningMsgs)
{
AskAndWriteConfig();
WriteLogFile();
}
}
CloseSteppers();
ClosePPort();
CloseEncoderResetLogFile();
CloseSerial( EncoderComPort);
CloseSerial( LX200ComPort);
if( CalledByGuideFlag)
WriteAltazSlewOutFile();
CloseMouseControl();
}
/*
for( Ix = 0; Ix < HsRecSize; Ix++)
fprintf( HsRecFile, "%8ld %8ld\n", HsRec[Ix].A, HsRec[Ix].Z);
// first position is index 0
fprintf( HsRecFile, " last entry in circular queue at position %d", HsRecIx);
fclose( HsRecFile);
*/
}
