u32
ODM_GetRFReg(
PDM_ODM_T pDM_Odm,
ODM_RF_RADIO_PATH_E eRFPath,
u32 RegAddr,
u32 BitMask
)
{
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
return PHY_QueryRFReg(pDM_Odm->priv, eRFPath, RegAddr, BitMask, 1);
#elif(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_MP))
struct rtw_adapter * Adapter = pDM_Odm->Adapter;
return PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask);
#endif
}
u4Byte
ODM_GetRFReg(
IN PDM_ODM_T pDM_Odm,
IN ODM_RF_RADIO_PATH_E eRFPath,
IN u4Byte RegAddr,
IN u4Byte BitMask
)
{
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
return PHY_QueryRFReg(pDM_Odm->priv, eRFPath, RegAddr, BitMask, 1);
#elif(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_MP))
PADAPTER Adapter = pDM_Odm->Adapter;
return PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask);
#endif
}
unsigned int DMDP_PHY_QueryRFReg(unsigned int phy, RF92CD_RADIO_PATH_E eRFPath,
unsigned int RegAddr, unsigned int BitMask, unsigned int dbg_avoid)
{
//printk("++++++++++++++++++++++++++%s++++++++++++++++++++++++++\n", __FUNCTION__);
if (phy >= NUM_WLAN_IFACE || phy < 0) {
printk("%s: phy index[%d] out of bound !!\n", __FUNCTION__, phy);
return -1;
}
return PHY_QueryRFReg((struct rtl8192cd_priv *)if_priv[phy], eRFPath, RegAddr, BitMask, dbg_avoid);
}
s32 MPT_InitializeAdapter(struct adapter *pAdapter, u8 Channel)
{
struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
s32 rtStatus = _SUCCESS;
struct mpt_context *pMptCtx = &pAdapter->mppriv.MptCtx;
struct mlme_priv *pmlmepriv = &pAdapter->mlmepriv;
/* HW Initialization for 8190 MPT. */
/* SW Initialization for 8190 MP. */
pMptCtx->bMptDrvUnload = false;
pMptCtx->bMassProdTest = false;
pMptCtx->bMptIndexEven = true; /* default gain index is -6.0db */
pMptCtx->h2cReqNum = 0x0;
/* Init mpt event. */
/* init for BT MP */
pMptCtx->bMptWorkItemInProgress = false;
pMptCtx->CurrMptAct = NULL;
/* */
/* Don't accept any packets */
rtw_write32(pAdapter, REG_RCR, 0);
PHY_IQCalibrate(pAdapter, false);
dm_CheckTXPowerTracking(&pHalData->odmpriv); /* trigger thermal meter */
PHY_LCCalibrate(pAdapter);
pMptCtx->backup0xc50 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0);
pMptCtx->backup0xc58 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0);
pMptCtx->backup0xc30 = (u8)PHY_QueryBBReg(pAdapter, rOFDM0_RxDetector1, bMaskByte0);
pMptCtx->backup0x52_RF_A = (u8)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
pMptCtx->backup0x52_RF_B = (u8)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
/* set ant to wifi side in mp mode */
rtw_write16(pAdapter, 0x870, 0x300);
rtw_write16(pAdapter, 0x860, 0x110);
if (pAdapter->registrypriv.mp_mode == 1)
pmlmepriv->fw_state = WIFI_MP_STATE;
return rtStatus;
}
extern bool
PHY_RFShadowCompare(
struct net_device* dev,
RF90_RADIO_PATH_E eRFPath,
u32 Offset)
{
u32 reg;
if (RF_Shadow[eRFPath][Offset].Compare == true)
{
reg = PHY_QueryRFReg(dev, eRFPath, Offset, bRFRegOffsetMask);
if (RF_Shadow[eRFPath][Offset].Value != reg)
{
RF_Shadow[eRFPath][Offset].ErrorOrNot = true;
RT_TRACE(COMP_INIT,
"PHY_RFShadowCompare RF-%d Addr%02x Err = %05x\n",
eRFPath, Offset, reg);
}
return RF_Shadow[eRFPath][Offset].ErrorOrNot ;
}
return false;
} /* PHY_RFShadowCompare */
BOOLEAN
PHY_RFShadowCompare(
IN PADAPTER Adapter,
IN RF_RADIO_PATH_E eRFPath,
IN u32 Offset)
{
u32 reg;
// Check if we need to check the register
if (RF_Shadow[eRFPath][Offset].Compare == _TRUE)
{
reg = PHY_QueryRFReg(Adapter, eRFPath, Offset, bRFRegOffsetMask);
// Compare shadow and real rf register for 20bits!!
if (RF_Shadow[eRFPath][Offset].Value != reg)
{
// Locate error position.
RF_Shadow[eRFPath][Offset].ErrorOrNot = _TRUE;
//RT_TRACE(COMP_INIT, DBG_LOUD,
//("PHY_RFShadowCompare RF-%d Addr%02lx Err = %05lx\n",
//eRFPath, Offset, reg));
}
return RF_Shadow[eRFPath][Offset].ErrorOrNot ;
}
return _FALSE;
} /* PHY_RFShadowCompare */
s32
MPT_InitializeAdapter(
IN PADAPTER pAdapter,
IN u8 Channel
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
s32 rtStatus = _SUCCESS;
PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx;
u32 ledsetting;
struct mlme_priv *pmlmepriv = &pAdapter->mlmepriv;
//-------------------------------------------------------------------------
// HW Initialization for 8190 MPT.
//-------------------------------------------------------------------------
//-------------------------------------------------------------------------
// SW Initialization for 8190 MP.
//-------------------------------------------------------------------------
pMptCtx->bMptDrvUnload = _FALSE;
pMptCtx->bMassProdTest = _FALSE;
pMptCtx->bMptIndexEven = _TRUE; //default gain index is -6.0db
pMptCtx->h2cReqNum = 0x0;
/* Init mpt event. */
#if 0 // for Windows
NdisInitializeEvent( &(pMptCtx->MptWorkItemEvent) );
NdisAllocateSpinLock( &(pMptCtx->MptWorkItemSpinLock) );
PlatformInitializeWorkItem(
Adapter,
&(pMptCtx->MptWorkItem),
(RT_WORKITEM_CALL_BACK)MPT_WorkItemCallback,
(PVOID)Adapter,
"MptWorkItem");
#endif
//init for BT MP
#ifdef CONFIG_RTL8723A
pMptCtx->bMPh2c_timeout = _FALSE;
pMptCtx->MptH2cRspEvent = _FALSE;
pMptCtx->MptBtC2hEvent = _FALSE;
_rtw_init_sema(&pMptCtx->MPh2c_Sema, 0);
_init_timer( &pMptCtx->MPh2c_timeout_timer, pAdapter->pnetdev, MPh2c_timeout_handle, pAdapter );
//before the reset bt patch command,set the wifi page 0's IO to BT mac reboot.
#endif
pMptCtx->bMptWorkItemInProgress = _FALSE;
pMptCtx->CurrMptAct = NULL;
//-------------------------------------------------------------------------
#if 1
// Don't accept any packets
rtw_write32(pAdapter, REG_RCR, 0);
#else
// Accept CRC error and destination address
//pHalData->ReceiveConfig |= (RCR_ACRC32|RCR_AAP);
//rtw_write32(pAdapter, REG_RCR, pHalData->ReceiveConfig);
rtw_write32(pAdapter, REG_RCR, 0x70000101);
#endif
#if 0
// If EEPROM or EFUSE is empty,we assign as RF 2T2R for MP.
if (pHalData->AutoloadFailFlag == TRUE)
{
pHalData->RF_Type = RF_2T2R;
}
#endif
//ledsetting = rtw_read32(pAdapter, REG_LEDCFG0);
//rtw_write32(pAdapter, REG_LEDCFG0, ledsetting & ~LED0DIS);
if(IS_HARDWARE_TYPE_8192DU(pAdapter))
{
rtw_write32(pAdapter, REG_LEDCFG0, 0x8888);
}
else
{
//rtw_write32(pAdapter, REG_LEDCFG0, 0x08080);
ledsetting = rtw_read32(pAdapter, REG_LEDCFG0);
#if defined (CONFIG_RTL8192C) || defined( CONFIG_RTL8192D )
rtw_write32(pAdapter, REG_LEDCFG0, ledsetting & ~LED0DIS);
#endif
}
PHY_IQCalibrate(pAdapter, _FALSE);
dm_CheckTXPowerTracking(&pHalData->odmpriv); //trigger thermal meter
PHY_LCCalibrate(pAdapter);
#ifdef CONFIG_PCI_HCI
PHY_SetRFPathSwitch(pAdapter, 1/*pHalData->bDefaultAntenna*/); //Wifi default use Main
#else
#ifdef CONFIG_RTL8192C
if (pHalData->BoardType == BOARD_MINICARD)
PHY_SetRFPathSwitch(pAdapter, 1/*pHalData->bDefaultAntenna*/); //default use Main
#endif
#endif
pMptCtx->backup0xc50 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_XAAGCCore1, bMaskByte0);
pMptCtx->backup0xc58 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_XBAGCCore1, bMaskByte0);
pMptCtx->backup0xc30 = (u1Byte)PHY_QueryBBReg(pAdapter, rOFDM0_RxDetector1, bMaskByte0);
#ifdef CONFIG_RTL8188E
pMptCtx->backup0x52_RF_A = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
pMptCtx->backup0x52_RF_B = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
#endif
//set ant to wifi side in mp mode
#ifdef CONFIG_RTL8723A
rtl8723a_InitAntenna_Selection(pAdapter);
#endif //CONFIG_RTL8723A
//set ant to wifi side in mp mode
rtw_write16(pAdapter, 0x870, 0x300);
rtw_write16(pAdapter, 0x860, 0x110);
if (pAdapter->registrypriv.mp_mode == 1)
pmlmepriv->fw_state = WIFI_MP_STATE;
return rtStatus;
}
static int
phy_RF6052_Config_ParaFile(
IN PADAPTER Adapter
)
{
u32 u4RegValue=0;
u8 eRFPath;
BB_REGISTER_DEFINITION_T *pPhyReg;
int rtStatus = _SUCCESS;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
u8 *pszRadioAFile = NULL, *pszRadioBFile = NULL;
static s8 sz92DRadioAFile[] = RTL8192D_PHY_RADIO_A;
static s8 sz92DRadioBFile[] = RTL8192D_PHY_RADIO_B;
static s8 sz92DRadioAintPAFile[] = RTL8192D_PHY_RADIO_A_intPA;
static s8 sz92DRadioBintPAFile[] = RTL8192D_PHY_RADIO_B_intPA;
BOOLEAN bMac1NeedInitRadioAFirst = _FALSE,bMac0NeedInitRadioBFirst = _FALSE;
BOOLEAN bNeedPowerDownRadioA = _FALSE,bNeedPowerDownRadioB = _FALSE;
BOOLEAN bTrueBPath = _FALSE;//vivi added this for read parameter from header, 20100908
u32 MaskforPhySet = 0; //For 92d PHY cross access, 88c must set value 0.
pszRadioAFile = sz92DRadioAFile;
pszRadioBFile = sz92DRadioBFile;
if(pHalData->InternalPA5G[0])
pszRadioAFile = sz92DRadioAintPAFile;
if(pHalData->InternalPA5G[1])
pszRadioBFile = sz92DRadioBintPAFile;
//DMDP,MAC0 on G band,MAC1 on A band.
if(pHalData->MacPhyMode92D==DUALMAC_DUALPHY)
{
if(pHalData->CurrentBandType92D == BAND_ON_2_4G && pHalData->interfaceIndex == 0)
{
//MAC0 Need PHY1 load radio_b.txt . Driver use DBI to write.
if(rtl8192d_PHY_EnableAnotherPHY(Adapter, _TRUE))
{
pHalData->NumTotalRFPath = 2;
bMac0NeedInitRadioBFirst = _TRUE;
}
else
{
// We think if MAC1 is ON,then radio_a.txt and radio_b.txt has been load.
return rtStatus;
}
}
else if(pHalData->CurrentBandType92D == BAND_ON_5G && pHalData->interfaceIndex == 1)
{
//MAC1 Need PHY0 load radio_a.txt . Driver use DBI to write.
if(rtl8192d_PHY_EnableAnotherPHY(Adapter, _FALSE))
{
pHalData->NumTotalRFPath = 2;
bMac1NeedInitRadioAFirst = _TRUE;
}
else
{
// We think if MAC0 is ON,then radio_a.txt and radio_b.txt has been load.
return rtStatus;
}
}
else if(pHalData->interfaceIndex == 1)
{
// MAC0 enabled, only init radia B.
pszRadioAFile = pszRadioBFile;
bTrueBPath = _TRUE; //vivi added this for read parameter from header, 20100909
}
}
//RT_TRACE(COMP_INIT, DBG_LOUD, (" ===> phy_RF6052_Config_ParaFile() Radio_A:%s\n",pszRadioAFile));
//RT_TRACE(COMP_INIT, DBG_LOUD, (" ===> phy_RF6052_Config_ParaFile() Radio_B:%s\n",pszRadioBFile));
//3//-----------------------------------------------------------------
//3// <2> Initialize RF
//3//-----------------------------------------------------------------
for(eRFPath = RF_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
{
if (bMac1NeedInitRadioAFirst) //Mac1 use PHY0 write
{
if (eRFPath == RF_PATH_A)
{
bNeedPowerDownRadioA = _TRUE;
MaskforPhySet = MAC1_ACCESS_PHY0;
}
else if (eRFPath == RF_PATH_B)
{
MaskforPhySet = 0;
bMac1NeedInitRadioAFirst = _FALSE;
eRFPath = RF_PATH_A;
bTrueBPath = _TRUE;
pszRadioAFile = pszRadioBFile;
pHalData->NumTotalRFPath = 1;
}
}
else if (bMac0NeedInitRadioBFirst) //Mac0 use PHY1 write
{
if (eRFPath == RF_PATH_A)
{
MaskforPhySet = 0;
}
if (eRFPath == RF_PATH_B)
{
MaskforPhySet = MAC0_ACCESS_PHY1;
bMac0NeedInitRadioBFirst = _FALSE;
bNeedPowerDownRadioB = _TRUE;
eRFPath = RF_PATH_A;
bTrueBPath = _TRUE;
pszRadioAFile = pszRadioBFile;
pHalData->NumTotalRFPath = 1;
}
}
pPhyReg = &pHalData->PHYRegDef[eRFPath];
/*----Store original RFENV control type----*/
switch(eRFPath)
{
case RF_PATH_A:
case RF_PATH_C:
u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs|MaskforPhySet, bRFSI_RFENV);
break;
case RF_PATH_B :
case RF_PATH_D:
u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs|MaskforPhySet, bRFSI_RFENV<<16);
break;
}
/*----Set RF_ENV enable----*/
PHY_SetBBReg(Adapter, pPhyReg->rfintfe|MaskforPhySet, bRFSI_RFENV<<16, 0x1);
rtw_udelay_os(1);//PlatformStallExecution(1);
/*----Set RF_ENV output high----*/
PHY_SetBBReg(Adapter, pPhyReg->rfintfo|MaskforPhySet, bRFSI_RFENV, 0x1);
rtw_udelay_os(1);//PlatformStallExecution(1);
/* Set bit number of Address and Data for RF register */
PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2|MaskforPhySet, b3WireAddressLength, 0x0); // Set 1 to 4 bits for 8255
rtw_udelay_os(1);//PlatformStallExecution(1);
PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2|MaskforPhySet, b3WireDataLength, 0x0); // Set 0 to 12 bits for 8255
rtw_udelay_os(1);//PlatformStallExecution(1);
/*----Initialize RF fom connfiguration file----*/
switch(eRFPath)
{
case RF_PATH_A:
#ifdef CONFIG_EMBEDDED_FWIMG
//vivi added this for read parameter from header, 20100908
if(bTrueBPath == _TRUE)
rtStatus = rtl8192d_PHY_ConfigRFWithHeaderFile(Adapter,radiob_txt|MaskforPhySet, (RF_RADIO_PATH_E)eRFPath);
else
rtStatus = rtl8192d_PHY_ConfigRFWithHeaderFile(Adapter,radioa_txt|MaskforPhySet, (RF_RADIO_PATH_E)eRFPath);
#else
rtStatus = rtl8192d_PHY_ConfigRFWithParaFile(Adapter, pszRadioAFile, (RF_RADIO_PATH_E)eRFPath);
#endif
break;
case RF_PATH_B:
#ifdef CONFIG_EMBEDDED_FWIMG
rtStatus = rtl8192d_PHY_ConfigRFWithHeaderFile(Adapter,radiob_txt, (RF_RADIO_PATH_E)eRFPath);
#else
rtStatus = rtl8192d_PHY_ConfigRFWithParaFile(Adapter, pszRadioBFile, (RF_RADIO_PATH_E)eRFPath);
#endif
break;
case RF_PATH_C:
break;
case RF_PATH_D:
break;
}
/*----Restore RFENV control type----*/;
switch(eRFPath)
{
case RF_PATH_A:
case RF_PATH_C:
PHY_SetBBReg(Adapter, pPhyReg->rfintfs|MaskforPhySet, bRFSI_RFENV, u4RegValue);
break;
case RF_PATH_B :
case RF_PATH_D:
PHY_SetBBReg(Adapter, pPhyReg->rfintfs|MaskforPhySet, bRFSI_RFENV<<16, u4RegValue);
break;
}
if(rtStatus != _SUCCESS){
//RT_TRACE(COMP_FPGA, DBG_LOUD, ("phy_RF6052_Config_ParaFile():Radio[%d] Fail!!", eRFPath));
goto phy_RF6052_Config_ParaFile_Fail;
}
}
if (bNeedPowerDownRadioA)
{
// check MAC0 enable or not again now, if enabled, not power down radio A.
rtl8192d_PHY_PowerDownAnotherPHY(Adapter, _FALSE);
}
else if (bNeedPowerDownRadioB)
{
// check MAC1 enable or not again now, if enabled, not power down radio B.
rtl8192d_PHY_PowerDownAnotherPHY(Adapter, _TRUE);
}
for(eRFPath = RF_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
{
#if MP_DRIVER == 1
PHY_SetRFReg(Adapter, eRFPath, RF_RXRF_A3, bRFRegOffsetMask, 0xff456);
#endif
pdmpriv->RegRF3C[eRFPath] = PHY_QueryRFReg(Adapter, eRFPath, RF_RXRF_A3, bRFRegOffsetMask);
}
//RT_TRACE(COMP_INIT, DBG_LOUD, ("<---phy_RF6052_Config_ParaFile()\n"));
return rtStatus;
phy_RF6052_Config_ParaFile_Fail:
return rtStatus;
}
void
odm_ConfigRFReg_8723B(
IN PDM_ODM_T pDM_Odm,
IN u4Byte Addr,
IN u4Byte Data,
IN ODM_RF_RADIO_PATH_E RF_PATH,
IN u4Byte RegAddr
)
{
if (Addr == 0xfe || Addr == 0xffe)
{
msleep(50);
}
else
{
PHY_SetRFReg(pDM_Odm->Adapter, RF_PATH, RegAddr, bRFRegOffsetMask, Data);
/* Add 1us delay between BB/RF register setting. */
udelay(1);
/* For disable/enable test in high temperature, the B6 value will fail to fill. Suggestion by BB Stanley, 2013.06.25. */
if (Addr == 0xb6)
{
u4Byte getvalue = 0;
u1Byte count = 0;
getvalue = PHY_QueryRFReg(pDM_Odm->Adapter, RF_PATH, Addr, bMaskDWord);
udelay(1);
while ((getvalue>>8)!=(Data>>8))
{
count++;
PHY_SetRFReg(pDM_Odm->Adapter, RF_PATH, RegAddr, bRFRegOffsetMask, Data);
udelay(1);
getvalue = PHY_QueryRFReg(pDM_Odm->Adapter, RF_PATH, Addr, bMaskDWord);
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigRFWithHeaderFile: [B6] getvalue 0x%x, Data 0x%x, count %d\n", getvalue, Data, count));
if (count>5)
break;
}
}
if (Addr == 0xb2)
{
u4Byte getvalue = 0;
u1Byte count = 0;
getvalue = PHY_QueryRFReg(pDM_Odm->Adapter, RF_PATH, Addr, bMaskDWord);
udelay(1);
while (getvalue!=Data)
{
count++;
PHY_SetRFReg(pDM_Odm->Adapter, RF_PATH, RegAddr, bRFRegOffsetMask, Data);
udelay(1);
/* Do LCK againg */
PHY_SetRFReg(pDM_Odm->Adapter, RF_PATH, 0x18, bRFRegOffsetMask, 0x0fc07);
udelay(1);
getvalue = PHY_QueryRFReg(pDM_Odm->Adapter, RF_PATH, Addr, bMaskDWord);
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigRFWithHeaderFile: [B2] getvalue 0x%x, Data 0x%x, count %d\n", getvalue, Data, count));
if (count>5)
break;
}
}
}
