int main() {
irq_history = 0;
// Enable Wake-Up/Soft-Reset/GOCEP IRQs
*NVIC_ISER = (0x1 << IRQ_WAKEUP) | (0x1 << IRQ_SOFT_RESET) | (0x1 << IRQ_GOCEP);
// Initialization Sequence
if (!get_flag(FLAG_ENUM)) {
initialization();
}
arb_debug_reg(0x20, cyc_num);
// Testing Sequence
if (cyc_num == 0) cycle0();
else if (cyc_num == 1) cycle1();
else if (cyc_num == 2) cycle2();
else if (cyc_num == 3) cycle3();
else if (cyc_num == 4) cycle4();
else if (cyc_num == 5) cycle5();
else if (cyc_num == 6) cycle6();
else if (cyc_num == 7) cycle7();
else if (cyc_num == 8) cycle8();
else if (cyc_num == 9) cycle9();
else if (cyc_num == 10) cycle10();
else if (cyc_num == 11) cycle11();
else cyc_num = 999;
arb_debug_reg(0x2F, cyc_num);
// Sleep/Wakeup OR Terminate operation
if (cyc_num == 999) *REG_CHIP_ID = 0xFFFFFF; // This will stop the verilog sim.
else {
cyc_num++;
set_wakeup_timer(5, 1, 1);
mbus_sleep_all();
}
while(1){ //Never Quit (should not come here.)
arb_debug_reg(0xFF, 0xDEADBEEF);
asm("nop;");
}
return 1;
}
int main() {
//Initialize Interrupts
disable_all_irq();
if (*REG_CHIP_ID != 0x1234) while(1);
// Initialization Sequence
if (enumerated != 0xDEADBEEF) {
initialization();
}
// Testing Sequence
if (cyc_num == 0) cycle0();
else if (cyc_num == 1) cycle1();
else if (cyc_num == 2) cycle2();
else if (cyc_num == 3) cycle3();
else if (cyc_num == 4) cycle4();
else if (cyc_num == 5) cycle5();
else if (cyc_num == 6) cycle6();
else if (cyc_num == 7) cycle7();
else if (cyc_num == 8) cycle8();
else if (cyc_num == 9) cycle9();
else if (cyc_num == 10) cycle10();
else if (cyc_num == 11) cycle11();
else cyc_num = 999;
// Sleep/Wakeup OR Terminate operation
if (cyc_num == 999) *REG_CHIP_ID = 0xFFFF; // This will stop the verilog sim.
else {
cyc_num++;
//set_wakeup_timer(5, 1, 1);
*WUPT_RESET = 0x1;
mbus_sleep_all();
}
while(1){ //Never Quit (should not come here.)
arb_debug_reg (0xDEADBEEF);
asm("nop;");
}
return 1;
}
void graph_test() {
Graph g("simple-graph.txt");
// testy zliczania dlugosci cyklu
std::vector<int> cycle1(g.V());
cycle1[0] = 1; cycle1[1] = 0; cycle1[2] = 2; cycle1[3] = 3;
assert(g.hamiltonLength(cycle1) == 12); // 2 + 2 + 5 + 3
std::vector<int> cycle2(g.V());
cycle2[0] = 2; cycle2[1] = 1; cycle2[2] = 3; cycle2[3] = 0;
assert(g.hamiltonLength(cycle2) == 9); // 1 + 2 + 4 + 2
// testy konstruktorow kopiujacych i operatora przypisania
Graph g2(g);
assert(g2.hamiltonLength(cycle1) == 12);
assert(g2.hamiltonLength(cycle2) == 9);
Graph g3(10);
g3 = g;
assert(g3.hamiltonLength(cycle1) == 12);
assert(g3.hamiltonLength(cycle2) == 9);
}
